Selective Oxygenation of Ring-Substituted Toluenes with Electron-Donating and -Withdrawing Substituents by Molecular Oxygen via Photoinduced Electron Transfer

Photocatalytic Substrate Oxidation Catalyzed by a Ruthenium(II) Complex with a Phenazine Moiety as the Active Site Using Dioxygen as a Terminal Oxidant

We have developed photocatalytic oxidation of aromatic substrates using O2 as a terminal oxidant to afford only 2e--oxidized products without the reductive activation of O2 in acidic water under visible-light irradiation. A RuII complex (1) bearing a pyrazine moiety as the active site in tetrapyrido[3,2-a:2',3'-c:3″,2″-h:2‴,3‴-j]phenazine (tpphz) as a ligand was employed as a photocatalyst. The active species for the photocatalysis was revealed to be not complex 1 itself but the protonated form, 1-H+, protonated at the vacant diimine site of tpphz. Upon photoexcitation in the presence of an organic substrate, 1-H+ was converted to the corresponding dihydro-intermediate (2-H+), where the pyrazine moiety of the ligand received 2e- and 2H+ from the substrate. 2-H+ was facilely oxidized by O2 to recover 1-H+. Consequently, an oxidation product of the substrate and H2O2 derived from dioxygen reduction were obtained; however, the H2O2 formed was also used for oxidation of 2-H+. In the oxidation of benzyl alcohol to benzaldehyde, the turnover number reached 240 for 10 h, and the quantum yield was determined to be 4.0%. The absence of ring-opening products in the oxidation of cyclobutanol suggests that the catalytic reaction proceeds through a mechanism involving formal hydride transfer. Mechanistic studies revealed that the photocatalytic substrate oxidation by 1-H+ was achieved in neither the lowest singlet excited state nor triplet excited state (S1 or T1) but in the second lowest singlet excited state (S2), i.e., 1(π-π*)* of the tpphz ligand. Thus, the photocatalytic substrate oxidation by 1-H+ can be categorized into unusual anti-Kasha photocatalysis.

Photo-Induced Aerobic Oxidation of C-H Bonds

The photo-induced aerobic oxidation of C-H bonds has become an increasingly valuable strategy in organic synthesis, offering a green and efficient method for introducing oxygen into organic molecules. The utilization of molecular oxygen as an oxidant, coupled with visible-light photocatalysis, has gained significant attention due to its sustainability, atom economy, and environmentally benign nature. This review highlights the recent advancements in the field, focusing on the development of metal-free and transition-metal-based photocatalytic systems and novel photosensitizers capable of promoting selective C-H bond oxidation. The mechanistic pathways involved in various substrate oxidations, including benzylic, alkyl, alkene, and alkyne C-H bond transformations, are discussed. This review concludes with insights into the potential for integrating photocatalysis with renewable energy sources, positioning photo-induced aerobic oxidation as a cornerstone of sustainable chemical processes.

High throughput selection of organic cathode materials

Efficient and affordable batteries require the design of novel organic electrode materials to overcome the drawbacks of the traditionally used inorganic materials, and the computational screening of potential candidates is a very efficient way to identify prospective solutions and minimize experimental testing. Here we present a DFT high-throughput computational screening where 86 million molecules contained in the PUBCHEM database have been analyzed and classified according to their estimated electrochemical features. The 5445 top-performing candidates were identified, and among them, 2306 are expected to have a one-electron reduction potential higher than 4 V versus (Li/Li+ ). Analogously, one-electron energy densities higher than 800 Whkg-1 have been predicted for 626 molecules. Explicit calculations performed for certain materials show that at least 69 candidates with a two-electron energy density higher than 1300 Whkg-1 . Successful molecules were sorted into several families, some of them already commonly used electrode materials, and others still experimentally untested. Most of them are small systems containing conjugated CO, NN, or NC functional groups. Our selected molecules form a valuable starting point for experimentalists exploring new materials for organic electrodes.

Deoxygenative coupling of alcohols with aromatic nitriles enabled by direct visible light excitation

A general and practical protocol is presented for visible-light-driven deoxygenative coupling of alcohols with aromatic nitriles in the absence of external photocatalysts. Utilizing a hydroxyl activation strategy with carbon disulfide, this C(sp3)-C(sp2) constructing platform accommodates a broad scope of alcohols and aryl nitriles to deliver various alkyl-substituted arenes. Mechanism studies show that a single electron transfer event between a photoexcited aryl nitrile and a xanthate anion is key to the transformation.

Visible light-mediated C (sp3)-H bond functionalization inside an all-organic nanocavity

Ultrafast C-H bond activation and functionalization in confinement using visible light will enable engineering chemical reactions with extraordinary speed and selectivity. To provide a transition metal-free route, here we demonstrate C-H bond activation reactions on poly-aromatic hydrocarbons (PAH) in all-organic cationic nanocage ExBox4+ for the first time. Visible light excitation in the host-guest charge transfer (CT) state allows the formation of oxidized photoproducts with high selectivity. Mechanistic understanding of this CT-mediated photoreaction using femtosecond broadband transient absorption revealed a few ∼100 ps timescale for C-H bond breaking on the attached -CH3 group via sequential electron transfer and proton transfer steps. We envision that our photosensitizer-free method will open up new avenues to pursue organic reactions using cavities that could serve both as photoredox catalysts and hosts for reactive reaction intermediates.

Zinc(II) Complexes with Triplet Charge-Transfer Excited States Enabling Energy-Transfer Catalysis, Photoinduced Electron Transfer, and Upconversion

Many Cu^I complexes have luminescent triplet charge-transfer excited states with diverse applications in photophysics and photochemistry, but for isoelectronic Zn^II compounds, this behavior is much less common, and they typically only show ligand-based fluorescence from singlet π-π* states. We report two closely related tetrahedral Zn^II compounds, in which intersystem crossing occurs with appreciable quantum yields and leads to the population of triplet excited states with intraligand charge-transfer (ILCT) character. In addition to showing fluorescence from their initially excited ¹ILCT states, these new compounds therefore undergo triplet-triplet energy transfer (TTET) from their ³ILCT states and consequently can act as sensitizers for photo-isomerization reactions and triplet-triplet annihilation upconversion from the blue to the ultraviolet spectral range. The photoactive ³ILCT state furthermore facilitates photoinduced electron transfer. Collectively, our findings demonstrate that mononuclear Zn^II compounds with photophysical and photochemical properties reminiscent of well-known Cu^I complexes are accessible with suitable ligands and that they are potentially amenable to many different applications. Our insights seem relevant in the greater context of obtaining photoactive compounds based on abundant transition metals, complementing well-known precious-metal-based luminophores and photosensitizers.

Spatio-temporal photolysis rate profiles of UV254 irradiated toluene

The volatile organic compound (VOC) toluene is irradiated with a 254 nm UV source. The studied sample (1 mL) of toluene is equipped in a sealed quartz cuvette and inserted in one of the Michelson interferometer's arms. During a UV254 irradiation of 1 h, the variation in the toluene's refractive index profiles are monitored as a movement of Michelson interference fringes. These interferograms are recorded and digitally analyzed to produce their phase map distributions and, hence, reconstructing the refractive index profiles which are expressing the toluene's photolysis behavior. With increasing the UV254 irradiation time, the toluene's refractive index profiles exhibit both temporal and spatial decrease due to the production of benzyl radicals and the consequent oxidation of these radicals. The spatio-temporal refractive index and photolysis rate profiles of toluene are reconstructed and discussed.

Recent progress in rare-earth metal-catalyzed sp2 and sp3 C–H functionalization to construct C–C and C–heteroelement bonds

The review presents rare-earth metal-catalyzed C(sp2/sp3)–H functionalization accessing C–C/C–heteroatom bonds and olefin (co)polymerization, highlighting substrate scope, mechanistic realization, and origin of site-, enantio-/diastereo-selectivity.

One-pot chlorocarboxylation of toluenes with chlorine dioxide under photoirradiation

Chlorine dioxide radical (ClO2˙) under photoirradiation induces the chlorocarboxylation of toluene in a single step to produce 2- and 4-chlorobenzoic acids.

Molecular oxygen-mediated oxygenation reactions involving radicals

Molecular oxygen as a green, non-toxic and inexpensive oxidant has displayed lots of advantages compared with other oxidants towards more selective, sustainable, and environmentally benign organic transformations. The oxygenation reactions which employ molecular oxygen or ambient air as both an oxidant and an oxygen source provide an efficient route to the synthesis of oxygen-containing compounds, and have been demonstrated in practical applications such as pharmaceutical synthesis and late-stage functionalization of complex molecules. This review article introduces the recent advances of radical processes in molecular oxygen-mediated oxygenation reactions. Reaction scopes, limitations and mechanisms are discussed based on reaction types and catalytic systems. Conclusions and perspectives are also given in the end.

Competition Between Cα -S and Cα -Cβ Bond Cleavage in β-Hydroxysulfoxides Cation Radicals Generated by Photoinduced Electron Transfer†

A kinetic and product study of the 3‐cyano‐N‐methyl‐quinolinium photoinduced monoelectronic oxidation of a series of β‐hydroxysulfoxides has been carried out to investigate the competition between C_α‐S and C_α‐C_β bond cleavage within the corresponding cation radicals. Laser flash photolysis experiments unequivocally established the formation of sulfoxide cation radicals showing their absorption band (λ_max ≈ 520 nm) and that of 3‐CN‐NMQ^• (λ_max ≈ 390 nm). Steady‐state photolysis experiments suggest that, in contrast to what previously observed for alkyl phenyl sulfoxide cation radicals that exclusively undergo C_α‐S bond cleavage, the presence of a β‐hydroxy group makes, in some cases, the C_α‐C_β scission competitive. The factors governing this competition seem to depend on the relative stability of the fragments formed from the two bond scissions. Substitution of the β‐OH group with ‐OMe did not dramatically change the reactivity pattern of the cation radicals thus suggesting that the observed favorable effect of the hydroxy group on the C_α‐C_β bond cleavage mainly resides on its capability to stabilize the carbocation formed upon this scission.

Photophysical Properties and Redox Potentials of Photosensitizers for Organic Photoredox Transformations

Photoredox catalysis has proven to be a powerful tool in synthetic organic chemistry. The rational design of photosensitizers with improved photocatalytic performance constitutes a major advancement in photoredox organic transformations. This review summarizes the fundamental ground-state and excited-state photophysical and electrochemical attributes of molecular photosensitizers, which are important determinants of their photocatalytic reactivity.

A Supported Bismuth Halide Perovskite Photocatalyst for Selective Aliphatic and Aromatic C-H Bond Activation

Direct selective oxidation of hydrocarbons to oxygenates by O2 is challenging. Catalysts are limited by the low activity and narrow application scope, and the main focus is on active C-H bonds at benzylic positions. In this work, stable, lead-free, Cs3 Bi2 Br9 halide perovskites are integrated within the pore channels of mesoporous SBA-15 silica and demonstrate their photocatalytic potentials for C-H bond activation. The composite photocatalysts can effectively oxidize hydrocarbons (C5 to C16 including aromatic and aliphatic alkanes) with a conversion rate up to 32900 μmol gcat -1  h-1 and excellent selectivity (>99 %) towards aldehydes and ketones under visible-light irradiation. Isotopic labeling, in situ spectroscopic studies, and DFT calculations reveal that well-dispersed small perovskite nanoparticles (2-5 nm) possess enhanced electron-hole separation and a close contact with hydrocarbons that facilitates C(sp3 )-H bond activation by photoinduced charges.

Photocatalytic Oxygenation Reactions Using Water and Dioxygen

Water (H₂ O) is the most environmentally benign reductant and is oxidized to evolve dioxygen (O₂ )-the greenest oxidant-in photosystem II. This Minireview focuses on photocatalytic oxygenation of substrates with H₂ O as an oxygen source and O₂ as an oxidant. Metal complexes can be oxidized by two molecules of one-electron oxidants with H₂ O to produce high-valent metal-oxo complexes, which act as active oxidants for oxygenating organic substrates. When an appropriate oxidant is employed for the substrate oxidation, the reduced oxidant can be oxidized by dioxygen to regenerate the oxidant when water and dioxygen are used as an oxygen source and an oxidant, respectively. Photoinduced electron transfer from a substrate (S) to the excited state of complex [(L)M^III ]⁺ produces a substrate radical cation (S^.+ ), accompanied by the regeneration of [(L)M^II ]. S^.+ then reacts with H₂ O to produce an OH adduct radical that is oxidized by [(L)M^III ]⁺ to yield an oxygenated product (SO), in which the oxygen atom originates from H₂ O, accompanied by regeneration of [(L)M^II ]. Photocatalytic oxidation of H₂ O by O₂ to produce H₂ O₂ is combined with the catalytic oxygenation of substrates with H₂ O₂ to produce the oxygenated products, in which the oxygen atom originates from O₂ at the beginning but later from water. This Minireview provides a promising strategy for oxygenation of substrates by using H₂ O as an oxygen source and O₂ as the greenest oxidant.

Metal-Free Photocatalysts for C-H Bond Oxygenation Reactions with Oxygen as the Oxidant

Direct and selective oxygenation of C-H bonds to C-O bonds is regarded as an effective tool to generate high-value products. However, these reactions are still subject to challenges such as harsh reaction conditions, use of expensive transition metal catalysts, and involvement of stoichiometric oxidants. To avoid these, molecular oxygen would be ideal as oxidant, as the byproduct is water or hydrogen peroxide. Additionally, achieving these reactions by using metal-free catalysts would contribute to green and sustainable chemical synthesis. This Minireview summarizes recent reports on C-H oxygenation reactions with metal-free catalysts and molecular oxygen under visible-light conditions.

Organopolymer with dual chromophores and fast charge-transfer properties for sustainable photocatalysis

Photocatalytic polymers offer an alternative to prevailing organometallics and nanomaterials, and they may benefit from polymer-mediated catalytic and material enhancements. MPC-1, a polymer photoredox catalyst reported herein, exhibits enhanced catalytic activity arising from charge transfer states (CTSs) between its two chromophores. Oligomeric and polymeric MPC-1 preparations both promote efficient hydrodehalogenation of α-halocarbonyl compounds while exhibiting different solubility properties. The polymer is readily recovered by filtration. MPC-1-coated vessels enable batch and flow photocatalysis, even with opaque reaction mixtures, via "backside irradiation." Ultrafast transient absorption spectroscopy indicates a fast charge-transfer process within 20 ps of photoexcitation. Time-resolved photoluminescence measurements reveal an approximate 10 ns lifetime for bright valence states. Ultrafast measurements suggest a long CTS lifetime. Empirical catalytic activities of small-molecule models of MPC-1 subunits support the CTS hypothesis. Density functional theory (DFT) and time-dependent DFT calculations are in good agreement with experimental spectra, spectral peak assignment, and proposed underlying energetics.

Catalytic asymmetric allylation of aldehydes with alkenes through allylic C(sp3)-H functionalization mediated by organophotoredox and chiral chromium hybrid catalysis

We describe a hybrid system that realizes cooperativity between an organophotoredox acridinium catalyst and a chiral chromium complex catalyst, thereby enabling unprecedented exploitation of unactivated hydrocarbon alkenes as precursors to chiral allylchromium nucleophiles for asymmetric allylation of aldehydes. The reaction proceeds under visible light irradiation at room temperature, affording the corresponding homoallylic alcohols with a diastereomeric ratio >20/1 and up to 99% ee. The addition of Mg(ClO4)2 markedly enhanced both the reactivity and enantioselectivity.

Ultrafast photoactivation of C─H bonds inside water-soluble nanocages

Light energy absorbed by molecules can be harnessed to activate chemical bonds with extraordinary speed. However, excitation energy redistribution within various molecular degrees of freedom prohibits bond-selective chemistry. Inspired by enzymes, we devised a new photocatalytic scheme that preorganizes and polarizes target chemical bonds inside water-soluble cationic nanocavities to engineer selective functionalization. Specifically, we present a route to photoactivate weakly polarized sp3 C─H bonds in water via host-guest charge transfer and control its reactivity with aerial O2. Electron-rich aromatic hydrocarbons self-organize inside redox complementary supramolecular cavities to form photoactivatable host-guest charge transfer complexes in water. An ultrafast C─H bond cleavage within ~10 to 400 ps is triggered by visible-light excitation, through a cage-assisted and solvent water-assisted proton-coupled electron transfer reaction. The confinement prolongs the lifetime of the carbon-centered radical to enable a facile yet selective reaction with molecular O2 leading to photocatalytic turnover of oxidized products in water.

Solvent-free selective oxidation of toluene over metal-doped MCM-22

The synthesis of MCM-22, subsequent metal doping, and physicochemical characterization of the products are reported. The solvent-free catalytic oxidation of toluene using hydrogen peroxide is explored, and the reaction parameters are optimized. A possible reaction mechanism is also described.

Modern Spin on the Electrochemical Persistence of Heteroatom-Bridged Triphenylmethyl-Type Radicals

Herein we present a clarification of the ambiguous persistence of the 10-methyl-9-phenylacridanyl, 9-phenylxanthenyl, and 9-phenylthioxanthenyl radicals in electrochemical experiments. Each of these radicals has separately been the subject of conflicting literature results for decades with publications claiming both their chemical inertness and propensity to dimerize. We assert that each radical is persistent at conventional electrochemical time scales up to several minutes based on reversible redox couples and cyclic voltammogram simulations of the radicals and their respective cations. All three radicals are rapidly consumed by aerial O₂, which lends irreversibility to the redox couples after fewer than 20 s of exposure to air. With appreciation for the O₂ sensitivity of these radicals, their electrochemically generated UV-visible absorption spectra have been acquired and matched to predictions made by TD-DFT calculations. Further, we propose that previous claims to have electrochemically measured radical-radical dimerizations have only observed reaction of these radicals with dissolved O₂.

Benzene C-H Etherification via Photocatalytic Hydrogen-Evolution Cross-Coupling Reaction

Aryl ethers can be constructed from the direct coupling between the benzene C-H bond and the alcohol O-H bond with the evolution of hydrogen via the synergistic merger of photocatalysis and cobalt catalysis. Utilizing the dual catalyst system consisting of 3-cyano-1-methylquinolinum photocatalyst and cobaloxime, intermolecular etherification of arenes with various alcohols and intramolecular alkoxylation of 3-phenylpropanols with formation of chromanes are accomplished. These reactions proceed at remarkably mild conditions, and the sole byproduct is equivalent hydrogen gas.

Photocatalytic benzylic C–H bond oxidation with a flavin scandium complex

Riboflavin tetraacetate–scandium triflate (RFTH⁺–2Sc³⁺) is an efficient photocatalyst for the aerobic oxidation of alkylbenzenes and benzyl alcohols to the corresponding aldehydes or ketones.

Organic Photoredox Catalysis as a General Strategy for Anti-Markovnikov Alkene Hydrofunctionalization

The development of a general catalyst system for the direct anti-Markovnikov hydrofunctionalization of alkenes is presented. A unique catalyst system comprised of an acridinium photooxidant and a hydrogen atom transfer reagent allows for a range of alkene anti-Markovnikov hydrofunctionalization reactions including hydroalkoxylation, hydroamination, and hydroacetoxylation.