Uniform catalytic site in Sn-beta-zeolite determined using X-ray absorption fine structure

Immobilization of isolated dimethyltin species on crystalline silicates through surface modification of layered octosilicate

Single metal atoms supported on silica are attractive catalysts, and precise control of the local environment around the metal species is essential. Crystalline silica is useful as an efficient support for the incorporation of well-defined metal sites. Dimethyltin species were regularly grafted onto the layer surfaces of layered octosilicate, a type of two-dimensional (2D) crystalline silica. Dimethyltin dichlorides react with the surface silanol (SiOH) groups of the silicate layers. The formation of Si-O-Sn bonds was confirmed by 29Si magic-angle spinning (MAS) NMR. X-ray absorption fine structure (XAFS) analysis showed the four-coordinated Sn species. These results suggested the presence of well-defined dipodal dimethyltin species on the layer surfaces. The degree of modification of the silanol groups with the dimethyltin groups increased with increasing amounts of dimethyltin dichloride; however, the maximum degree of modification was approximately 50%. This value was interpreted as an alternate modification of the octosilicate reaction sites with dimethyltin groups. These results demonstrate the potential for developing highly active single metal catalysts with a high density of regularly arranged active sites on high surface area supports.

Efficient Catalytic Production of Hydrogen Peroxide Using Tin-containing Zeolite Fixed Palladium Nanoparticles with Oxidation Resistance

The metal surfaces tend to be oxidized in air through dissociation of the O-O bond of oxygen to reduce the performances in various fields. Although several ligand modification routes have alleviated the oxidation of bulky metal surfaces, it is still a challenge for the oxidation resistance of small-size metal nanoparticles. Herein, we fixed the small-size Pd nanoparticles in tin-contained MFI zeolite crystals, where the tin acts as an electron donor to efficiently hinder the oxidation of Pd by weakening the adsorption of molecular oxygen and suppressing the O-O cleavage. This oxidation-resistant Pd catalyst exhibited superior performance in directly synthesizing hydrogen peroxide from hydrogen and oxygen, with the productivity of hydrogen peroxide at ≈10,170 mmol gPd -1 h-1 , steadily outperforming the catalysts tested previously. This work leads to the hypothesis that tin is an electron donor to realize oxidation-resistant Pd within zeolite crystals for efficient catalysis to overcome the limitation of generally supported Pd catalysts and further motivates the use of oxidation-resistant metal nanoparticles in various fields.

Computational Study of the Solid-State Incorporation of Sn(II) Acetate into Zeolite β

Sn-doped zeolites are potent Lewis acid catalysts for important reactions in the context of green and sustainable chemistry; however, their synthesis can have long reaction times and harsh chemical requirements, presenting an obstacle to scale-up and industrial application. To incorporate Sn into the β zeolite framework, solid-state incorporation (SSI) has recently been demonstrated as a fast and solvent-free synthetic method, with no impairment to the high activity and selectivity associated with Sn-β for its catalytic applications. Here, we report an ab initio computational study that combines periodic density functional theory with high-level embedded-cluster quantum/molecular mechanical (QM/MM) to elucidate the mechanistic steps in the synthetic process. Initially, once the Sn(II) acetate precursor coordinates to the β framework, acetic acid forms via a facile hydrogen transfer from the β framework onto the monodentate acetate ligand, with low kinetic barriers for subsequent dissociation of the ligand from the framework-bound Sn. Ketonization of the dissociated acetic acid can occur over the Lewis acidic Sn(II) site to produce CO2 and acetone with a low kinetic barrier (1.03 eV) compared to a gas-phase process (3.84 eV), helping to explain product distributions in good accordance with experimental analysis. Furthermore, we consider the oxidation of the Sn(II) species to form the Sn(IV) active site in the material by O2- and H2O-mediated mechanisms. The kinetic barrier for oxidation via H2 release is 3.26 eV, while the H2O-mediated dehydrogenation process has a minimum barrier of 1.38 eV, which indicates the possible role of residual H2O in the experimental observations of SSI synthesis. However, we find that dehydrogenation is facilitated more significantly by the presence of dioxygen (O2), introduced in the compressed air gas feed, via a two-step process oxidation process that forms H2O2 as an intermediate and has greatly reduced kinetic barriers of 0.25 and 0.26 eV. The results provide insight into how Sn insertion into β occurs during SSI and demonstrate the possible mechanism of top-down synthetic procedures for metal insertion into zeolites.

Al distribution and structural stability of H-BEA zeolites at different Si/Al ratios and temperatures: a first-principles study

Beta zeolites have been widely used in acid-catalyzed reactions because of their excellent properties. An in-depth study of the position, quantity, and distribution of beta zeolites substituted by Al is significant to understand the catalytic performance of the active site of zeolite catalysts. The distribution of Al in H-BEA and the structure of silanol nests in dealuminated BEA at different Si/Al ratios and synthesis temperatures were studied by the DFT method. T1, T2, T7, and T9 sites were chosen to be simulated. The synthesis temperature can change the distribution of Al and the proportion of T sites at different Si/Al ratios. The proportion of T7 and T9 is more than 70% at different Si/Al ratios of H-BEA and decreases with the synthesis temperature. T1 and T2 sites begin to appear when Si/Al < 20 and the proportion of T1 and T2 sites is less than 20%. When Si/Al < 8, the substitution energy of the AlSiAl structure, which has Si(2Al, 2Si) species, is obviously lower than that of the normal structure, which indicates that the Al-O-Si-O-Al species will appear in H-BEA. The Al(T7)Si(T5)Al(T9)Si(T5)Al(T7) and Al(T1)Si(T1)Al(T9) groups can not only stabilize H-BEA but also play an essential role in the formation of Si(2Al, 2Si) species. For dealuminated BEA zeolites, the silanol nest forms four hydrogen bonds through four silanols. The orientation of silanol groups in the silanol nest formed after dealumination at different T sites is different. The T7 and T9 sites in H-BEA are more likely to undergo dealumination. By contrast, the dealumination of the T1 and T2 sites is a challenge.

Recent Advances in Tetra- (Ti, Sn, Zr, Hf) and Pentavalent (Nb, V, Ta) Metal-Substituted Molecular Sieve Catalysis

Metal substitution of molecular sieve systems is a major driving force in developing novel catalytic processes to meet current demands of green chemistry concepts and to achieve sustainability in the chemical industry and in other aspects of our everyday life. The advantages of metal-substituted molecular sieves include high surface areas, molecular sieving effects, confinement effects, and active site and morphology variability and stability. The present review aims to comprehensively and critically assess recent advances in the area of tetra- (Ti, Sn, Zr, Hf) and pentavalent (V, Nb, Ta) metal-substituted molecular sieves, which are mainly characterized for their Lewis acidic active sites. Metal oxide molecular sieve materials with properties similar to those of zeolites and siliceous molecular sieve systems are also discussed, in addition to relevant studies on metal-organic frameworks (MOFs) and some composite MOF systems. In particular, this review focuses on (i) synthesis aspects determining active site accessibility and local environment; (ii) advances in active site characterization and, importantly, quantification; (iii) selective redox and isomerization reaction applications; and (iv) photoelectrocatalytic applications.

Zeolites in catalysis: sustainable synthesis and its impact on properties and applications

Zeolites are versatile catalysts not only for large scale petrochemical processes but also in applications related to fine chemicals synthesis, biomass conversion and CO2 utilization. Introduction of mesopores and heteroatoms...

DFT study of phenol alkylation with propylene on H-BEA in the absence and presence of water

Water reduces the activation barrier of the rate-limiting step of phenol alkylation with propylene in H-BEA. This, in turn, increases the transition-state theory rate coefficient by two orders-of-magnitude, suggesting much faster alkylation.

Ordered Hydrogen-Bonded Alcohol Networks Confined in Lewis Acid Zeolites Accelerate Transfer Hydrogenation Turnover Rates

The disruption of ordered water molecules confined within hydrophobic reaction pockets alters the energetics of adsorption and catalysis, but a mechanistic understanding of how nonaqueous solvents influence catalysis in microporous voids remains unclear. Here, we use kinetic analyses coupled with IR spectroscopy to study how alkanol hydrogen-bonding networks confined within hydrophobic and hydrophilic zeolite catalysts modify reaction free energy landscapes. Hydrophobic Beta zeolites containing framework Sn atoms catalyze the transfer hydrogenation reaction of cyclohexanone in a 2-butanol solvent 10× faster than their hydrophilic analogues. This rate enhancement stems from the ability of hydrophobic Sn-Beta to inhibit the formation of extended liquid-like 2-butanol oligomers and promote dimeric H-bonded 2-butanol networks. These different intraporous 2-butanol solvent structures manifest as differences in the activation and adsorption enthalpies and entropies that comprise the free energy landscape of transfer hydrogenation catalysis. The ordered H-bonding solvent network present in hydrophobic Sn-Beta stabilizes the transfer hydrogenation transition state to a greater extent than the liquid-like 2-butanol solvent present in hydrophilic Sn-Beta, giving rise to higher turnover rates on hydrophobic Sn-Beta. Additionally, reactant adsorption within hydrophobic Sn-Beta is driven by the breakup of intraporous solvent-solvent interactions, resulting in positive enthalpies of adsorption that are partially compensated by an increase in the solvent reorganization entropy. Collectively, these results emphasize the ability of the zeolite pore to regulate the structure of confined nonaqueous H-bonding solvent networks, which offers an additional dimension to modulate adsorption and reactivity.

gem-Diol-Type Intermediate in the Activation of a Ketone on Sn-β Zeolite as Studied by Solid-State NMR Spectroscopy

Lewis acid zeolites have found increasing application in the field of biomass conversion, in which the selective transformation of carbonyl-containing molecules is of particular importance due to their relevance in organic synthesis. Mechanistic insight into the activation of carbonyl groups on Lewis acid sites is challenging and critical for the understanding of the catalytic process, which requires the identification of reaction intermediates. Here we report the observation of a stable surface gem-diol-type species in the activation of acetone on Sn-β zeolite. ¹³ C, ¹¹⁹ Sn, and ¹³ C-¹¹⁹ Sn double-resonance NMR spectroscopic studies demonstrate that only the open Sn site ((SiO)₃ Sn-OH) on Sn-β is responsible for the formation of the surface species. ¹³ C MAS NMR experiments together with density functional theory calculations suggest that the gem-diol-type species exhibits high reactivity and can serve as an active intermediate in the Meerwein-Ponndorf-Verley-Oppenauer (MPVO) reaction of acetone with cyclohexanol. The gem-diol-type species offers an energy-preferable pathway for the direct carbon-to-carbon hydrogen transfer between ketone and alcohol. The results provide new insights into the transformation of carbonyl-containing molecules catalyzed by Lewis acid zeolites.

Single-Atom Catalysts across the Periodic Table

Isolated atoms featuring unique reactivity are at the heart of enzymatic and homogeneous catalysts. In contrast, although the concept has long existed, single-atom heterogeneous catalysts (SACs) have only recently gained prominence. Host materials have similar functions to ligands in homogeneous catalysts, determining the stability, local environment, and electronic properties of isolated atoms and thus providing a platform for tailoring heterogeneous catalysts for targeted applications. Within just a decade, we have witnessed many examples of SACs both disrupting diverse fields of heterogeneous catalysis with their distinctive reactivity and substantially enriching our understanding of molecular processes on surfaces. To date, the term SAC mostly refers to late transition metal-based systems, but numerous examples exist in which isolated atoms of other elements play key catalytic roles. This review provides a compositional encyclopedia of SACs, celebrating the 10th anniversary of the introduction of this term. By defining single-atom catalysis in the broadest sense, we explore the full elemental diversity, joining different areas across the whole periodic table, and discussing historical milestones and recent developments. In particular, we examine the coordination structures and associated properties accessed through distinct single-atom-host combinations and relate them to their main applications in thermo-, electro-, and photocatalysis, revealing trends in element-specific evolution, host design, and uses. Finally, we highlight frontiers in the field, including multimetallic SACs, atom proximity control, and possible applications for multistep and cascade reactions, identifying challenges, and propose directions for future development in this flourishing field.

Selective active site placement in Lewis acid zeolites and implications for catalysis of oxygenated compounds

The selective incorporation of isolated framework Lewis acid sites at specific crystallographic positions in high-silica zeolites was achieved by applying a rationalized post-synthetic grafting methodology. The removal of framework Ge atoms from a Ge-BEC zeolite with low concentrations of Ge in the framework (Si/Ge ∼ 150) followed by grafting allows the synthesis of Sn-BEC zeolites with Sn atoms positionally biased into the double-4-ring (D4R) crystallographic positions of the BEC framework. Spectroscopic characterization using solid-state nuclear magnetic resonance (NMR) coupled with theoretical calculations revealed that Sn atoms preferentially form open Sn sites in the D4R of Sn-BEC. This observation was supported by IR spectra of adsorbed deuterated acetonitrile (CD₃CN), a known titrant of Sn sites in zeolites. The catalytic implications of selective incorporation of open Sn sites in Sn-BEC were probed using the Meerwein–Ponndorf–Verley–Oppenauer (MPVO) reaction. Although the MPVO turnover rates normalized by the total number of open Sn sites were comparable on Sn-BEC and a conventional Sn-Beta catalyst synthesized in fluoride media (Sn-Beta(F)), Sn-BEC demonstrated higher per gram reaction rates because of its larger fraction of open sites compared to Sn-Beta(F). These results highlight the advantage of placing active sites in targeted locations within a zeolite structure. The methodology presented here to selectively place catalytic active sites via sacrificial heteroatoms, such as Ge, can be generalized for the design of many other tetrahedrally-coordinated metal-containing zeolites.

The selective incorporation of isolated framework Lewis acid sites in specific crystallographic positions in high-silica zeolites was achieved successfully by applying a rationalized post-synthetic grafting methodology.

Tutorial: structural characterization of isolated metal atoms and subnanometric metal clusters in zeolites

The encapsulation of subnanometric metal entities (isolated metal atoms and metal clusters with a few atoms) in porous materials such as zeolites can be an effective strategy for the stabilization of those metal species and therefore can be further used for a variety of catalytic reactions. However, owing to the complexity of zeolite structures and their low stability under the electron beam, it is challenging to obtain atomic-level structural information of the subnanometric metal species encapsulated in zeolite crystallites. In this protocol, we show the application of a scanning transmission electron microscopy (STEM) technique that records simultaneously the high-angle annular dark-field (HAADF) images and integrated differential phase-contrast (iDPC) images for structural characterization of subnanometric Pt and Sn species within MFI zeolite. The approach relies on the use of a computational model to simulate results obtained under different conditions where the metals are present in different positions within the zeolite. This imaging technique allows to obtain simultaneously the spatial information of heavy elements (Pt and Sn in this work) and the zeolite framework structure, enabling direct determination of the location of the subnanometric metal species. Moreover, we also present the combination of other spectroscopy techniques as complementary tools for the STEM-iDPC imaging technique to obtain global understanding and insights on the spatial distributions of subnanometric metal species in zeolite structure. These structural insights can provide guidelines for the rational design of uniform metal-zeolite materials for catalytic applications.

Solvent-Activated Hafnium-Containing Zeolites Enable Selective and Continuous Glucose-Fructose Isomerisation

The isomerisation of glucose to fructose is a critical step towards manufacturing petroleum-free chemicals from lignocellulosic biomass. Herein we show that Hf-containing zeolites are unique catalysts for this reaction, enabling true thermodynamic equilibrium to be achieved in a single step during intensified continuous operation, which no chemical or biological catalyst has yet been able to achieve. Unprecedented single-pass yields of 58 % are observed at a fructose selectivity of 94 %, and continuous operation for over 100 hours is demonstrated. The unexpected performance of the catalyst is realised following a period of activation within the reactor, during which time interaction with the solvent generates a state of activity that is absent in the synthesised catalyst. Mechanistic studies by X-ray absorption spectroscopy, chemisorption FTIR, operando UV/Vis and ¹ H-¹³ C HSQC NMR spectroscopy indicate that activity arises from isolated Hf^IV atoms with monofunctional acidic properties.

Preparation of Porous Liquid Based on Silicalite-1

Solid porous materials, like zeolites, have been widely used in a variety of fields such as size-and-shape-selective absorption/separation and catalysis because of their porosity. However, there are few liquid materials that exhibit permanent porosity. Porous liquids are a novel material that combine the properties of fluidity and permanent porosity. They have potential applications in many fields such as gas separation, storage and transport. Herein, we report a novel Type 1 porous liquid prepared based on silicalite-1. The pore size of this porous liquid was determined by positron annihilation lifetime spectroscopy (PALS), and the CO₂ capacities were determined by the intelligent gravimetric analyzer (IGA). The unique properties of this porous liquid can promote its application in many fields such as gas storage and transport.

Regioselective generation and reactivity control of subnanometric platinum clusters in zeolites for high-temperature catalysis

Subnanometric metal species (single atoms and clusters) have been demonstrated to be unique compared with their nanoparticulate counterparts. However, the poor stabilization of subnanometric metal species towards sintering at high temperature (>500 °C) under oxidative or reductive reaction conditions limits their catalytic application. Zeolites can serve as an ideal support to stabilize subnanometric metal catalysts, but it is challenging to localize subnanometric metal species on specific sites and modulate their reactivity. We have achieved a very high preference for localization of highly stable subnanometric Pt and PtSn clusters in the sinusoidal channels of purely siliceous MFI zeolite, as revealed by atomically resolved electron microscopy combining high-angle annular dark-field and integrated differential phase contrast imaging techniques. These catalysts show very high stability, selectivity and activity for the industrially important dehydrogenation of propane to form propylene. This stabilization strategy could be extended to other crystalline porous materials.

Investigation of Various Pd Species in Pd/BEA for Cold Start Application

A series of Pd/BEA catalysts with various Pd loadings were synthesized. Two active Pd2+ species, Z−-Pd2+-Z− and Z−-Pd(OH)+, on exchanged sites of zeolites, were identified by in situ FTIR using CO and NH3 respectively. Higher NOx storage capacity of Z−-Pd2+-Z− was demonstrated compared with that of Z−-Pd(OH)+, which was caused by the different resistance to H2O. Besides, lower Pd loading led to a sharp decline of Z−-Pd(OH)+, which was attributed to the ‘exchange preference’ for Z−-Pd2+-Z− in BEA. Based on this research, the atom utilization of Pd can be improved by decreasing Pd loading.

Deactivation of Sn-Beta zeolites caused by structural transformation of hydrophobic to hydrophilic micropores during aqueous-phase glucose isomerization

Spectroscopic, titration and kinetic methods were used to probe the deactivation of Sn-Beta in water.

New trends in tailoring active sites in zeolite-based catalysts

This review discusses approaches for tailoring active sites in extra-large pore, nanocrystalline, and hierarchical zeolites and their performance in emerging catalytic applications.

Direct Observation of Tin in Different T-Sites of Sn-BEA by One- and Two-Dimensional 119Sn MAS NMR Spectroscopy

The direct and quantitative identification of active sites is crucial for the development of zeolite catalysts and their implementation in industry. Herein we report on the application of one-dimensional ¹¹⁹Sn direct polarization (DP) and rotational echo double-resonance (REDOR) and two-dimensional ¹¹⁹Sn magic-angle tuning (MAT) NMR spectroscopy for the identification of different Sn sites in fully dehydrated Sn-BEA zeolite. It is demonstrated that ¹¹⁹Sn magic-angle spinning (MAS) NMR techniques, modified by Carr-Purcell-Meiboom-Gill (CPMG) echo-train acquisition allow to resolve three groups of NMR signals, which can be attributed to three groups of nonequivalent T-sites based on the existing theoretical predictions: (I) T9, T4, and T3; (II) T2, T1, and T8; and (III) T7, T5, and T6. Results suggest that the sites attributed to group III are the most populated in Sn-BEA samples obtained via the fluoride route. The attribution of NMR lines to different T-sites in the structure of BEA allows for the establishment of structure-reactivity relationship and therefore for further improvement of Sn-BEA catalysts.

Porous metallosilicates for heterogeneous, liquid-phase catalysis: perspectives and pertaining challenges

Porous silicates containing dilute amounts of tri-, tetra- and penta-valent metal sites, such as TS-1, Sn-β and Fe-ZSM-5, have recently emerged as state of the art catalysts for a variety of sustainable chemical transformations. In contrast with their aluminosilicate cousins, which are widely employed throughout the refinery industry for gas-phase catalytic transformations, such metallosilicates have exhibited unprecedented levels of performance for a variety of liquid-phase catalytic processes, including the conversion of biomass to chemicals, and sustainable oxidation technologies with H2O2. However, despite their unique levels of performance for these new types of chemical transformations, increased utilization of these promising materials is complicated by several factors. For example, their utilization in a liquid, and often polar, medium hinders process intensification (scale-up, catalyst deactivation). Moreover, such materials do not generally exhibit the active-site homogeneity of conventional aluminosilicates, and they typically possess a wide variety of active-site ensembles, only some of which may be directly involved in the catalytic chemistry of interest. Consequently, mechanistic understanding of these catalysts remains relatively low, and competitive reactions are commonly observed. Accordingly, unified approaches towards developing more active, selective and stable porous metallosilicates have not yet been achieved. Drawing on some of the most recent literature in the field, the purpose of this mini review is both to highlight the breakthroughs made with regard to the use of porous metallosilicates as heterogeneous catalysts for liquid-phase processing, and to highlight the pertaining challenges that we, and others, aim to overcome during the forthcoming years.

Periodic modeling of zeolite Ti-LTA

We have proposed a combination of density functional theory calculations and interatomic potential-based simulations to study the structural, electronic, and mechanical properties of pure-silica zeolite Linde Type A (LTA), as well as two titanium-doped compositions. The energetics of the titanium distribution within the zeolite framework suggest that the inclusion of a second titanium atom with configurations Ti-(Si)₀-Ti, Ti-(Si)₁-Ti, and Ti-(Si)₂-Ti is more energetically favorable than the mono-substitution. Infra-red spectra have been simulated for the pure-silica LTA, the single titanium substitution, and the configurations Ti-(Si)₀-Ti and Ti-(Si)₂-Ti, comparing against experimental benchmarks where available. The energetics of the direct dissociation of water on these Lewis acid sites indicate that this process is only favored when two titanium atoms form a two-membered ring (2MR) sharing two hydroxy groups, Ti-(OH)₂-Ti, which suggests that the presence of water may tune the distribution of titanium atoms within the framework of zeolite LTA. The electronic analysis indicates charge transfer from H₂O to the Lewis acid site and hybridization of their electronic states.

Structural reconstruction: a milestone in the hydrothermal synthesis of highly active Sn-Beta zeolites

Hydrophobic Sn-Beta zeolites, hydrothermally synthesized via structural reconstruction, exhibit unparalleled catalytic performances for Lewis acid-catalyzed reactions, far outperforming post-synthesized Sn-Beta and state-of-the-art Sn-Beta-F materials.

Theoretical study on the reaction mechanism of hydrogenation of furfural to furfuryl alcohol on Lewis acidic BEA zeolites: effects of defect structure and tetravalent metals substitution

We examined the catalytic roles of the defect structure and tetravalent-metal substitution on Lewis acidic BEA Zeolites for the furfural hydrogenation reaction using the DFT approach.

Interrogating the Lewis Acidity of Metal Sites in Beta Zeolites with 15N Pyridine Adsorption Coupled with MAS NMR Spectroscopy

The Lewis acidity of isolated framework metal sites in Beta zeolites was characterized with ¹⁵N isotopically labeled pyridine adsorption coupled with magic-angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy. The ¹⁵N chemical shift of adsorbed pyridine was found to scale with the acid character of both Lewis (Ti, Hf, Zr, Nb, Ta, and Sn) and Brønsted (B, Ga, and Al) acidic heteroatoms. The ¹⁵N chemical shift showed a linear correlation with Mulliken electronegativity of the metal center in the order Ti < Hf < Zr < Nb < Ta < Sn < H⁺. Theoretical calculations using density functional theory (DFT) showed a strong correlation between experimental ¹⁵N chemical shift and the calculated metal-nitrogen bond dissociation energy, and revealed the importance of active site reorganization when determining adsorption strength. The relationships found between ¹⁵N pyridine chemical shift and intrinsic chemical descriptors of metal framework sites complement adsorption equilibrium data and provide a robust method to characterize, and ultimately optimize, metal-reactant binding and activation for Lewis acid zeolites. Direct ¹⁵N MAS NMR detection protocols applied to the Lewis acid-base adducts allowed the differentiation and quantification of framework metal sites in the presence of extraframework oxides, including highly quadrupolar nuclei that are not amenable for quantification with conventional NMR methods.