Reactivities of Mononuclear Non-Heme Iron Intermediates Including Evidence that Iron(III)−Hydroperoxo Species Is a Sluggish Oxidant

Dioxygenase Chemistry in Nucleophilic Aldehyde Deformylations Utilizing Dicopper O2-Derived Peroxide Complexes

The chemistry of copper-dioxygen complexes is relevant to copper enzymes in biology as well as in (ligand)Cu-O2 (or Cu2-O2) species utilized in oxidative transformations. For overall energy considerations, as applicable in chemical synthesis, it is beneficial to have an appropriate atom economy; both O-atoms of O2(g) are transferred to the product(s). However, examples of such dioxygenase-type chemistry are extremely rare or not well documented. Herein, we report on nucleophilic oxidative aldehyde deformylation reactivity by the peroxo-dicopper(II) species [Cu2II(BPMPO-)(O22-)]1+ {BPMPO-H = 2,6-bis{[(bis(2-pyridylmethyl)amino]methyl}-4-methylphenol)} and [Cu2II(XYLO-)(O22-)]1+ (XYLO- = a BPMPO- analogue possessing bis(2-{2-pyridyl}ethyl)amine chelating arms). Their dicopper(I) precursors are dioxygenase catalysts. The O2(g)-derived peroxo-dicopper(II) intermediates react rapidly with aldehydes like 2-phenylpropionaldehyde (2-PPA) and cyclohexanecarboxaldehyde (CCA) in 2-methyltetrahydrofuran at -90 °C. Warming to room temperature (RT) followed by workup results in good yields of formate (HC(O)O-) along with ketones (acetophenone or cyclohexanone). Mechanistic investigation shows that [Cu2II(BPMPO-)(O22-)]1+ species initially reacts reversibly with the aldehydes to form detectable dicopper(II) peroxyhemiacetal intermediates, for which optical titrations provide the Keq (at -90 °C) of 73.6 × 102 M-1 (2-PPA) and 10.4 × 102 M-1 (CCA). In the reaction of [Cu2II(XYLO-)(O22-)]1+ with 2-PPA, product complexes characterized by single-crystal X-ray crystallography are the anticipated dicopper(I) complex, [Cu2I(XYLO-)]1+ plus a mixed-valent Cu(I)Cu(II)-formate species. Formate was further identified and confirmed by 1H NMR spectroscopy and electrospray ionization mass spectrometry (ESI-MS) analysis. Using 18O2(g)-isotope labeling the reaction produced a high yield of 18-O incorporated acetophenone as well as formate. The overall results signify that true dioxygenase reactions have occurred, supported by a thorough mechanistic investigation.

The [(Bn-tpen)FeII]2+ Complex as a Catalyst for the Oxidation of Cyclohexene and Limonene with Dioxygen

[(Bn-tpen)FeII(MeCN)](ClO4)2, containing the pentadentate Bn-tpen-N-benzyl-N,N',N'-tris(2-pyridylmethyl)-1,2-diaminoethane ligand, was studied in the oxygenation of cyclohexene and limonene using low-pressure dioxygen (0.2 atm air or 1 atm pure O2) in acetonitrile. 2-Cyclohexen-1-one and 2-cyclohexen-1-ol are the main products of cyclohexene oxidations, with cyclohexene oxide as a minor product. Limonene is oxidized to limonene oxide, carvone, and carveol. Other oxidation products such as perillaldehyde and perillyl alcohol are found in trace amounts. This catalyst is slightly less active than the previously reported [(N4Py)FeII(MeCN)](ClO4)2 (N4Py-N,N-bis(2-pyridylmethyl)-N-(bis-2-pyridylmethyl)amine). Based on cyclic voltammetry experiments, it is postulated that [(Bn-tpen)FeIV=O]2+ is the active species. The induction period of approx. 3 h during cyclohexene oxygenation is probably caused by deactivation of the reactive Fe(IV)=O species by the parent Fe(II) complex. Equimolar mixtures of Fe(II) salt and the ligand (in situ-formed catalyst) gave catalytic performance similar to that of the synthesized catalyst.

Mechanistic Insights into Amphoteric Reactivity of an Iron-Bispidine Complex

The reactivity of FeIII -alkylperoxido complexes has remained a riddle to inorganic chemists owing to their thermal instability and impotency towards organic substrates. These iron-oxygen adducts have been known as sluggish oxidants towards oxidative electrophilic and nucleophilic reactions. Herein, we report the synthesis and spectroscopic characterization of a relatively stable mononuclear high-spin FeIII -alkylperoxido complex supported by an engineered bispidine framework. Against the notion, this FeIII -alkylperoxido complex serves as a rare example of versatile reactivity in both electrophilic and nucleophilic reactions. Detailed mechanistic studies and computational calculations reveal a novel reaction mechanism, where a putative superoxido intermediate orchestrates the amphoteric property of the oxidant. The design of the backbone is pivotal to convey stability and reactivity to alkylperoxido and superoxido intermediates. Contrary to the well-known O-O bond cleavage that generates an FeIV -oxido species, the FeIII -alkylperoxido complex reported here undergoes O-C bond scission to generate a superoxido moiety that is responsible for the amphiphilic reactivity.

Late-Stage Chemo- and Enantioselective Oxidation of Indoles to C3-Monosubstituted Oxindoles

Catalytic asymmetric preparation of chiral 3-monosubstituted oxindoles represents a significant challenge in synthetic chemistry due to the ease of racemization of the tertiary stereocenter through enolization. Here, we describe a general titanium-catalyzed chemo- and enantioselective indole oxidation to produce a diverse set of chiral 3-monosubstituted oxindoles with up to 96% yield, 99% ee, and with a substrate/catalyst ratio of 10,000 by using the combination of a simple titanium(salan) catalyst with green and atom-economic terminal oxidant H2O2. The mild approach tolerates a broad range of functional groups, enabling late-stage asymmetric diversification of a series of commercial drugs and natural products together with late-stage asymmetric construction of a wide set of enzyme antagonists, all of which are difficult to achieve through existing methods.

Reaction landscape of a mononuclear MnIII-hydroxo complex with hydrogen peroxide

Peroxomanganese species have been proposed as key intermediates in the catalytic cycles of both manganese enzymes and synthetic catalysts. However, many of these intermediates have yet to be observed. Here, we report the formation of a series of intermediates, each generated from the reaction of the mononuclear MnIII-hydroxo complex [MnIII(OH)(dpaq2Me)]+ with hydrogen peroxide under slightly different conditions. By changing the acidity of the reaction mixture and/or the quantity of hydrogen peroxide added, we are able to control which intermediate forms. Using a combination of electronic absorption, 1H NMR, EPR, and X-ray absorption spectroscopies, as well as density functional theory (DFT) and complete active space self-consistent field (CASSCF) calculations, we formulate these intermediates as the bis(μ-oxo)dimanganese(III,IV) complex [MnIIIMnIV(μ-O)2(dpaq2Me)2]+, the MnIII-hydroperoxo complex [MnIII(OOH)(dpaq2Me)]+, and the MnIII-peroxo complex [MnIII(O2)(dpaq2Me)]. The formation of the MnIII-hydroperoxo species from the reaction of a MnIII-hydroxo complex with hydrogen peroxide mimics an elementary reaction proposed for many synthetic manganese catalysts that activate hydrogen peroxide.

Catalytic Asymmetric Oxidation of Amines to Hydroxylamines

Chiral hydroxylamines are increasingly common structural elements in pharmaceuticals and agrochemicals, but their asymmetric synthesis remains challenging. Although enantioselective oxidation is the most straightforward method to prepare chiral oxides with a higher oxidation state, asymmetric and even nonasymmetric amine oxidation to hydroxylamines has been poorly addressed. We report a titanium-catalyzed asymmetric oxidation of racemic amines providing a broad range of structurally diverse chiral hydroxylamines with excellent chemo- and enantioselectivity. Notably, hydroxylamines bearing diverse substituent patterns on the stereocenters, including α,α-ester-alkyl, α,α-amide-alkyl, α,α-aryl-alkyl, α,α-alkynyl-alkyl, and α,α-dialkyl, are well tolerated with good functional group compatibility. Catalyst turnover numbers up to 5000 and selectivity factors up to 278 are observed. This finding offers a democratized platform to chiral hydroxylamines as design elements for drug discovery and provides insights into metal-catalyzed asymmetric oxidation of challenging substrates.

Systematic Electronic Tuning on the Property and Reactivity of Cobalt-(Hydro)peroxo Intermediates

A series of cobalt(III)-peroxo complexes, [Co^III(R₂-TBDAP)(O₂)]⁺ (1^R2; R₂ = Cl, H, and OMe), and cobalt(III)-hydroperoxo complexes, [Co^III(R₂-TBDAP)(O₂H)(CH₃CN)]²⁺ (2^R2), bearing electronically tuned tetraazamacrocyclic ligands (R₂-TBDAP = N,N'-di-tert-butyl-2,11-diaza[3.3](2,6)-p-R₂-pyridinophane) were prepared from their cobalt(II) precursors and characterized by various physicochemical methods. The X-ray diffraction and spectroscopic analyses unambiguously showed that all 1^R2 compounds have similar octahedral geometry with a side-on peroxocobalt(III) moiety, but the O-O bond lengths of 1^Cl [1.398(3) Å] and 1^OMe [1.401(4) Å] were shorter than that of 1^H [1.456(3) Å] due to the different spin states. For 2^R2, the O-O bond vibration energies of 2^Cl and 2^OMe were identical at 853 cm^-1 (856 cm^-1 for 2^H), but their Co-O bond vibration frequencies were observed at 572 cm^-1 for 2^Cl and 550 cm^-1 for 2^OMe, respectively, by resonance Raman spectroscopy (560 cm^-1 for 2^H). Interestingly, the redox potentials (E_1/2) of 2^R2 increased in the order of 2^OMe (0.19 V) < 2^H (0.24 V) < 2^Cl (0.34 V) according to the electron richness of the R₂-TBDAP ligands, but the oxygen-atom-transfer reactivities of 2^R2 showed a reverse trend (k₂: 2^Cl < 2^H < 2^OMe) with a 13-fold rate enhancement at 2^OMe over 2^Cl in a sulfoxidation reaction with thioanisole. Although the reactivity trend contradicts the general consideration that electron-rich metal-oxygen species with low E_1/2 values have sluggish electrophilic reactivity, this could be explained by a weak Co-O bond vibration of 2^OMe in the unusual reaction pathway. These results provide considerable insight into the electronic nature-reactivity relationship of metal-oxygen species.

Use of Singlet Oxygen in the Generation of a Mononuclear Nonheme Iron(IV)-Oxo Complex

Nonheme iron(III)-superoxo intermediates are generated in the activation of dioxygen (O₂) by nonheme iron(II) complexes and then converted to iron(IV)-oxo species by reacting with hydrogen donor substrates with relatively weak C-H bonds. If singlet oxygen (¹O₂) with ca. 1 eV higher energy than the ground state triplet oxygen (³O₂) is employed, iron(IV)-oxo complexes can be synthesized using hydrogen donor substrates with much stronger C-H bonds. However, ¹O₂ has never been used in generating iron(IV)-oxo complexes. Herein, we report that a nonheme iron(IV)-oxo species, [Fe^IV(O)(TMC)]²⁺ (TMC = tetramethylcyclam), is generated using ¹O₂, which is produced with boron subphthalocyanine chloride (SubPc) as a photosensitizer, and hydrogen donor substrates with relatively strong C-H bonds, such as toluene (BDE = 89.5 kcal mol^-1), via electron transfer from [Fe^II(TMC)]²⁺ to ¹O₂, which is energetically more favorable by 0.98 eV, as compared with electron transfer from [Fe^II(TMC)]²⁺ to ³O₂. Electron transfer from [Fe^II(TMC)]²⁺ to ¹O₂ produces an iron(III)-superoxo complex, [Fe^III(O₂)(TMC)]²⁺, followed by abstracting a hydrogen atom from toluene by [Fe^III(O₂)(TMC)]²⁺ to form an iron(III)-hydroperoxo complex, [Fe^III(OOH)(TMC)]²⁺, that is further converted to the [Fe^IV(O)(TMC)]²⁺ species. Thus, the present study reports the first example of generating a mononuclear nonheme iron(IV)-oxo complex with the use of singlet oxygen, instead of triplet oxygen, and a hydrogen atom donor with relatively strong C-H bonds. Detailed mechanistic aspects, such as the detection of ¹O₂ emission, the quenching by [Fe^II(TMC)]²⁺, and the quantum yields, have also been discussed to provide valuable mechanistic insights into understanding nonheme iron-oxo chemistry.

Investigating the Active Oxidants Involved in Cytochrome P450 Catalyzed Sulfoxidation Reactions

Cytochrome P450 (CYP) heme-thiolate monooxygenases catalyze the hydroxylation of the C-H bonds of organic molecules. This reaction is initiated by a ferryl-oxo heme radical cation (Cpd I). These enzymes can also catalyze sulfoxidation reactions and the ferric-hydroperoxy complex (Cpd 0) and the Fe(III)-H₂ O₂ complex have been proposed as alternative oxidants for this transformation. To investigate this, the oxidation of 4-alkylthiobenzoic acids and 4-methoxybenzoic acid by the CYP199A4 enzyme from Rhodopseudomonas palustris HaA2 was compared using both monooxygenase and peroxygenase pathways. By examining mutants at the mechanistically important, conserved acid alcohol-pair (D251N, T252A and T252E) the relative amounts of the reactive intermediates that would form in these reactions were disturbed. Substrate binding and X-ray crystal structures helped to understand changes in the activity and enabled an attempt to evaluate whether multiple oxidants can participate in these reactions. In peroxygenase reactions the T252E mutant had higher activity towards sulfoxidation than O-demethylation but in the monooxygenase reactions with the WT enzyme the activity of both reactions was similar. The peroxygenase activity of the T252A mutant was greater for sulfoxidation reactions than the WT enzyme, which is the reverse of the activity changes observed for O-demethylation. The monooxygenase activity and coupling efficiency of sulfoxidation and oxidative demethylation were reduced by similar degrees with the T252A mutant. These observations infer that while Cpd I is required for O-dealkylation, another oxidant may contribute to sulfoxidation. Based on the activity of the CYP199A4 mutants it is proposed that this is the Fe(III)-H₂ O₂ complex which would be more abundant in the peroxide-driven reactions.

Peroxide-Selective Reduction of O2 at Redox-Inactive Rare-Earth(III) Triflates Generates an Ambiphilic Peroxide

Metal peroxides are key species involved in a range of critical biological and synthetic processes. Rare-earth (group III and the lanthanides; Sc, Y, La-Lu) peroxides have been implicated as reactive intermediates in catalysis; however, reactivity studies of isolated, structurally characterized rare-earth peroxides have been limited. Herein, we report the peroxide-selective (93-99% O₂^2-) reduction of dioxygen (O₂) at redox-inactive rare-earth triflates in methanol using a mild metallocene reductant, decamethylferrocene (Fc*). The first molecular praseodymium peroxide ([Pr^III₂(O₂^2-)(18C6)₂(EG)₂][OTf]₄; 18C6 = 18-crown-6, EG = ethylene glycol, ^-OTf = ^-O₃SCF₃; 2-Pr) was isolated and characterized by single-crystal X-ray diffraction, Raman spectroscopy, and NMR spectroscopy. 2-Pr displays high thermal stability (120 °C, 50 mTorr), is protonated by mild organic acids [pK_a1(MeOH) = 5.09 ± 0.23], and engages in electrophilic (e.g., oxygen atom transfer) and nucleophilic (e.g., phosphate-ester cleavage) reactivity. Our mechanistic studies reveal that the rate of oxygen reduction is dictated by metal-ion accessibility, rather than Lewis acidity, and suggest new opportunities for differentiated reactivity of redox-inactive metal ions by leveraging weak metal-ligand binding events preceding electron transfer.

Methane Monooxygenase Mimic Asymmetric Oxidation: Self-Assembling μ-Hydroxo, Carboxylate-Bridged Diiron(III)-Catalyzed Enantioselective Dehydrogenation

Mimicking naturally occurring metalloenzymes to enrich the diversity of catalytic asymmetric oxidation reactions is a long-standing goal for modern chemistry. Toward this end, a range of methane monooxygenase (MMO) mimic chiral carboxylate-bridged (μ-hydroxo) diiron(III) dimer complexes using salan as basal ligand and sodium aryl carboxylate as additive have been designed and synthesized. The chiral diiron complexes exhibit efficient catalytic reactivity in dehydrogenative kinetic resolution of indolines using environmentally benign hydrogen peroxide as oxidant. In particular, complex C9 bearing sterically encumbered salan ligands and a 2-naphthoate bridge is identified as the optimal catalyst in terms of chiral recognition. Further investigation reveals that this MMO mimic chiral catalyst can be readily generated by self-assembly under the dehydrogenation conditions. The self-assembling catalytic system is applicable to a series of indolines with multiple stereocenters and diverse substituent patterns in high efficiency with a high level of chiral recognition (selectivity factor up to 153). Late-stage dehydrogenative kinetic resolution of bioactive molecules is further examined.

The influence of secondary interactions on the [Ni(O2)]+ mediated aldehyde oxidation reactions

A rate enhancement of one to two orders of magnitude can be obtained in the aldehyde deformylation reactions by replacing the -N(CH₃) groups of [Ni^III(O₂)(Me₄[12]aneN₄)]⁺ (Me₄[12]aneN₄ = 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecane) and [Ni^III(O₂)(Me₄[13]aneN₄)]⁺ (Me₄[13]aneN₄ = 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclotridecane) complexes by -NH in [Ni^III(O₂)([12]aneN₄)]⁺ (2; [12]aneN₄ = 1,4,7,10-tetraazacyclododecane) and [Ni^III(O₂)([13]aneN₄)]⁺ (4; [13]aneN₄ = 1,4,7,10-tetraazacyclotridecane). Based on detailed spectroscopic, reaction-kinetics and theoretical investigations, the higher reactivities of 2 and 4 are attributed to the changes in the secondary-sphere interactions between the [Ni^III(O₂)]⁺ and [12]aneN₄ or [13]aneN₄ moieties, which open up an alternative electrophilic pathway for the aldehyde oxidation reaction. Identification of primary kinetic isotope effects on the reactivity and stability of 2 when the -NH groups of the [12]aneN₄ ligand are deuterated may also suggest the presence of secondary interaction between the -NH groups of [12]aneN₄ and [Ni^III(O₂)]⁺ moieties, although, such interactions are not obvious in the DFT calculated optimized structure at the employed level of theory.

Spectroscopic Evidence for a Cobalt-Bound Peroxyhemiacetal Intermediate

Aldehyde deformylation reactions by metal dioxygen adducts have been proposed to involve peroxyhemiacetal species as key intermediates. However, direct evidence of such intermediates has not been obtained to date. We report the spectroscopic characterization of a mononuclear cobalt(III)-peroxyhemiacetal complex, [Co(Me₃-TPADP)(O₂CH(O)CH(CH₃)C₆H₅)]⁺ (2), in the reaction of a cobalt(III)-peroxo complex (1) with 2-phenylpropionaldehyde (2-PPA). The formation of 2 is also investigated by isotope labeling experiments and kinetic studies. The conclusion that the peroxyhemiacetalcobalt(III) intermediate is responsible for the aldehyde deformylation is supported by the product analyses. Furthermore, isotopic labeling suggests that the reactivity of the cobalt(III)-peroxo complex depends on the second reactant. The aldehyde inserts between the oxygen atoms of 1, whereas the reaction with acyl chlorides proceeds by a nucleophilic attack. The observation of the peroxyhemiacetal intermediate provides significant insight into the initial step of aldehyde deformylation by metalloenzymes.

Change of Selectivity in C-H Functionalization Promoted by Nonheme Iron(IV)-oxo Complexes by the Effect of the N-hydroxyphthalimide HAT Mediator

A kinetic analysis of the hydrogen atom transfer (HAT) reactions from a series of organic compounds to the iron(IV)-oxo complex [(N4Py)Fe^IV(O)]²⁺ and to the phthalimide N-oxyl radical (PINO) has been carried out. The results indicate that a higher activating effect of α-heteroatoms toward the HAT from C-H bonds is observed with the more electrophilic PINO radical. When the N-hydroxy precursor of PINO, N-hydroxyphthalimide (NHPI), is used as a HAT mediator in the oxidation promoted by [(N4Py)Fe^IV(O)]²⁺, significant differences in terms of selectivity have been found. Product studies of the competitive oxidations of primary and secondary aliphatic alcohols (1-decanol, cyclopentanol, and cyclohexanol) with alkylaromatics (ethylbenzene and diphenylmethane) demonstrated that it is possible to modify the selectivity of the oxidations promoted by [(N4Py)Fe^IV(O)]²⁺ in the presence of NHPI. In fact, alkylaromatic substrates are more reactive in the absence of the mediator while alcohols are preferably oxidized in the presence of NHPI.

Mechanistic Insights into the Oxygen Atom Transfer Reactions by Nonheme Manganese Complex: A Computational Case Study on the Comparative Oxidative Ability of Manganese-Hydroperoxo vs High-Valent MnIV═O and MnIV-OH Intermediates

Understanding the comparative oxidative abilities of high-valent metal-oxo/hydroxo/hydroperoxo species holds the key to robust biomimic catalysts that perform desired organic transformations with very high selectivity and efficiency. The comparative oxidative abilities of popular high-valent iron-oxo and manganese-oxo species are often counterintuitive, for example, oxygen atom transfer (OAT) reaction by [(Me₂EBC)Mn^IV-OOH]³⁺, [(Me₂EBC)Mn^IV-OH]³⁺, and [(Me₂EBC)Mn^IV═O]²⁺ (Me₂EBC = 4,11-dimethyl-1,4,8,11-tetraazabicyclo[6.6.2]hexadecane) shows extremely high reactivity for Mn^IV-OOH species and no reactivity for Mn^IV-OH and Mn^IV═O species toward alkyl/aromatic sulfides. Using a combination of density functional theory (DFT) and ab initio domain-based local pair natural orbital coupled-cluster with single, double, and perturbative triples excitation (DLPNO-CCSD(T)) and complete-active space self-consistent field/N-electron valence perturbation theory second order (CASSCF/NEVPT2) calculations, here, we have explored the electronic structures and sulfoxidation mechanism of these species. Our calculations unveil that Mn^IV-OOH reacts through distal oxygen atom with the substrate via electron transfer (ET) mechanism with a very small kinetic barrier (16.5 kJ/mol), placing this species at the top among the best-known catalysts for such transformations. The Mn^IV-OH and Mn^IV═O species have a much larger barrier. The mechanism has also been found to switch from ET in the former to concerted in the latter, rendering both unreactive under the tested experimental conditions. Intrinsic differences in the electronic structures, such as the presence and absence of the multiconfigurational character coupled with the steric effects, are responsible for such variations observed. This comparative oxidative ability that runs contrary to the popular iron-oxo/hydroperoxo reactivity will have larger mechanistic implications in understanding the reactivity of biomimic catalysts and the underlying mechanisms in PSII.

Directing transition metal-based oxygen-functionalization catalysis

This review presents the recent progress of oxygen functionalization reactions based on non-electrochemical (conventional organic synthesis) and electrochemical methods. Although both methods have their advantages and limitations, the former approach has been used to synthesize a broader range of organic substances as the latter is limited by several factors, such as poor selectivity and high energy cost. However, because electrochemical methods can replace harmful terminal oxidizers with external voltage, organic electrosynthesis has emerged as greener and more eco-friendly compared to conventional organic synthesis. The progress of electrochemical methods toward oxygen functionalization is presented by an in-depth discussion of different types of electrically driven-chemical organic synthesis, with particular attention to recently developed electrochemical systems and catalyst designs. We hope to direct the attention of readers to the latest breakthroughs of traditional oxygen functionalization reactions and to the potential of electrochemistry for the transformation of organic substrates to useful end products.

The Fenton Reaction in Water Assisted by Picolinic Acid: Accelerated Iron Cycling and Co-generation of a Selective Fe-Based Oxidant

The Fenton reaction is limited by a narrow acidic pH range, the slow reduction of Fe(III), and susceptibility of the nonselective hydroxyl radical (HO^•) to scavenging by water constituents. Here, we employed the biodegradable chelating agent picolinic acid (PICA) to address these concerns. Compared to the classical Fenton reaction at pH 3.0, PICA greatly accelerated the degradation of atrazine, sulfamethazine, and various substituted phenols at pH 5.0 in a reaction with autocatalytic characteristics. Although HO^• served as the principal oxidant, a high-spin, end-on hydroperoxo intermediate, tentatively identified as PICA-Fe^III-OOH, also exhibited reactivity toward several test compounds. Chloride release from the oxidation of 2,4,6-trichlorophenol and the positive slope of the Hammett correlation for a series of halogenated phenols were consistent with PICA-Fe^III-OOH reacting as a nucleophilic oxidant. Compared to HO^•, PICA-Fe^III-OOH is less sensitive to potential scavengers in environmental water samples. Kinetic analysis reveals that PICA facilitates Fe(III)/Fe(II) transformation by accelerating Fe(III) reduction by H₂O₂. Autocatalysis is ascribed to the buildup of Fe(II) from the reduction of Fe(III) by H₂O₂ as well as PICA oxidation products. PICA assistance in the Fenton reaction may be beneficial to wastewater treatment because it favors iron cycling, extends the pH range, and balances oxidation universality with selectivity.

The most reactive iron and manganese complexes with N-pentadentate ligands for dioxygen activation—synthesis, characteristics, applications

The iron and manganese complexes that activate oxygen atom play multiple role in technologically relevant reactions as well as in biological transformations, in which exist in different redox states. Among them, high-valent oxo intermediate seems to be the most important one. Iron, and/or manganese-based processes have found application in many areas, starting from catalysis and sustainable technologies, through DNA oxidative cleavage, to new substances useful in chemotherapeutic drugs. This review is not only the latest detailed list of uses of homogeneous N-pentadentate iron and manganese catalysts for syntheses of valuable molecules with huge applications in green technologies, but also a kind of "a cookbook", collecting "recipes" for the discussed complexes, in which the sources necessary to obtain a full characterization of the compounds are presented. Following the catalytic activity of metalloenzymes, and taking into account the ubiquity of iron and manganese salts, which in combination with properly designed ligands may show similarity to natural systems, the discussed complexes can find application as new anti-cancer drugs. Also, owing to ability of oxygen atom to exchange in reaction with H₂O, they can be successfully applied in photodriven reactions of water oxidation, as well as in chemically regenerated fuel cells as a redox catalyst.

Kinetic resolution of indolines by asymmetric hydroxylamine formation

Catalytic kinetic resolution of amines represents a longstanding challenge in chemical synthesis. Here, we described a kinetic resolution of secondary amines through oxygenation to produce enantiopure hydroxylamines involving N–O bond formation. The economic and practical titanium-catalyzed asymmetric oxygenation with environmentally benign hydrogen peroxide as oxidant is applicable to a range of racemic indolines with multiple stereocenters and diverse substituent patterns in high efficiency with efficient chemoselectivity and enantio-discrimination. Late-stage asymmetric oxygenation of bioactive molecules that are otherwise difficult to synthesize was also explored.

Catalytic kinetic resolution of amines is a longstanding challenge in chemical synthesis. Here, the authors report on titanium‐catalysed asymmetric oxygenation with hydrogen peroxide for kinetic resolution of secondary amines through oxygenation to produce enantiopure hydroxylamines involving N–O bond formation.

Enhancing Chemo- and Stereoselectivity in C-H Bond Oxygenation with H2O2 by Nonheme High-Spin Iron Catalysts: The Role of Lewis Acid and Multimetal Centers

Spin states of iron often direct the selectivity in oxidation catalysis by iron complexes using hydrogen peroxide (H₂O₂) on an oxidant. While low-spin iron(III) hydroperoxides display stereoselective C-H bond hydroxylation, the reactions are nonstereoselective with high-spin iron(II) catalysts. The catalytic studies with a series of high-spin iron(II) complexes of N4 ligands with H₂O₂ and Sc³⁺ reported here reveal that the Lewis acid promotes catalytic C-H bond hydroxylation with high chemo- and stereoselectivity. This reactivity pattern is observed with iron(II) complexes containing two cis-labile sites. The enhanced selectivity for C-H bond hydroxylation catalyzed by the high-spin iron(II) complexes in the presence of Sc³⁺ parallels that of the low-spin iron catalysts. Furthermore, the introduction of multimetal centers enhances the activity and selectivity of the iron catalyst. The study provides insights into the development of peroxide-dependent bioinspired catalysts for the selective oxygenation of C-H bonds without the restriction of using iron complexes of strong-field ligands.

A comprehensive insight into aldehyde deformylation: mechanistic implications from biology and chemistry

Aldehyde deformylation is an important reaction in biology, organic chemistry and inorganic chemistry and the process has been widely applied and utilized. For instance, in biology, the aldehyde deformylation reaction has wide differences in biological function, whereby cyanobacteria convert aldehydes into alkanes or alkenes, which are used as natural products for, e.g., defense mechanisms. By contrast, the cytochromes P450 catalyse the biosynthesis of hormones, such as estrogen, through an aldehyde deformylation reaction step. In organic chemistry, the aldehyde deformylation reaction is a common process for replacing functional groups on a molecule, and as such, many different synthetic methods and procedures have been reported that involve an aldehyde deformylation step. In bioinorganic chemistry, a variety of metal(iii)-peroxo complexes have been synthesized as biomimetic models and shown to react efficiently with aldehydes through deformylation reactions. This review paper provides an overview of the various aldehyde deformylation reactions in organic chemistry, biology and biomimetic model systems, and shows a broad range of different chemical reaction mechanisms for this process. Although a nucleophilic attack at the carbonyl centre is the consensus reaction mechanism, several examples of an alternative electrophilic reaction mechanism starting with hydrogen atom abstraction have been reported as well. There is still much to learn and to discover on aldehyde deformylation reactions, as deciphered in this review paper.

Functional models of nonheme diiron enzymes: reactivity of the μ-oxo-μ-1,2-peroxo-diiron(iii) intermediate in electrophilic and nucleophilic reactions

The reactivity of the previously reported peroxo-adduct [FeIII2(μ-O)(μ-1,2-O2)(IndH)2(solv)2]2+ (1) (IndH = 1,3-bis(2-pyridyl-imino)isoindoline) has been investigated in nucleophilic (e.g., deformylation of alkyl and aryl alkyl aldehydes) and electrophilic (e.g. oxidation of phenols) stoichiometric reactions as biomimics of ribonucleotide reductase (RNR-R2) and aldehyde deformylating oxygenase (ADO) enzymes. Based on detailed kinetic and mechanistic studies, we have found further evidence for the ambiphilic behaviour of the peroxo intermediates proposed for diferric oxidoreductase enzymes.

Inorganic reaction mechanisms. A personal journey

This review covers highlights of the work performed in the van Eldik group on inorganic reaction mechanisms over the past two decades in the form of a personal journey. Topics that are covered include, from NO to HNO chemistry, peroxide activation in model porphyrin and enzymatic systems, the wonder-world of Ru^III(edta) chemistry, redox chemistry of Ru(iii) complexes, Ru(ii) polypyridyl complexes and their application, relevant physicochemical properties and reaction mechanisms in ionic liquids, and mechanistic insight from computational chemistry. In each of these sections, typical examples of mechanistic studies are presented in reference to related work reported in the literature.

Bio-inspired Nonheme Iron Oxidation Catalysis: Involvement of Oxoiron(V) Oxidants in Cleaving Strong C-H Bonds

Nonheme iron enzymes generate powerful and versatile oxidants that perform a wide range of oxidation reactions, including the functionalization of inert C-H bonds, which is a major challenge for chemists. The oxidative abilities of these enzymes have inspired bioinorganic chemists to design synthetic models to mimic their ability to perform some of the most difficult oxidation reactions and study the mechanisms of such transformations. Iron-oxygen intermediates like iron(III)-hydroperoxo and high-valent iron-oxo species have been trapped and identified in investigations of these bio-inspired catalytic systems, with the latter proposed to be the active oxidant for most of these systems. In this Review, we highlight the recent spectroscopic and mechanistic advances that have shed light on the various pathways that can be accessed by bio-inspired nonheme iron systems to form the high-valent iron-oxo intermediates.

P450-BM3-Catalyzed Sulfoxidation versus Hydroxylation: A Common or Two Different Catalytically Active Species?

While the mechanism of the P450-catalyzed oxidative hydroxylation of organic compounds has been studied in detail for many years, less is known about sulfoxidation. Depending upon the structure of the respective substrate, heme-Fe═O (Cpd I), heme-Fe(III)-OOH (Cpd 0), and heme-Fe(III)-H2O2 (protonated Cpd 0) have been proposed as reactive intermediates. In the present study, we consider the transformation of isosteric substrates via sulfoxidation and oxidative hydroxylation, respectively, catalyzed by regio- and enantioselective mutants of P450-BM3 which were constructed by directed evolution. 1-Thiochromanone and 1-tetralone were used as the isosteric substrates because, unlike previous studies involving fully flexible compounds such as thia-fatty acids and fatty acids, respectively, these compounds are rigid and cannot occur in a multitude of different conformations and binding modes in the large P450-BM3 binding pocket. The experimental results comprising activity and regio- and enantioselectivity, flanked by molecular dynamics computations within a time scale of 300 ns and QM/MM calculations of transition-state energies, unequivocally show that heme-Fe═O (Cpd I) is the common catalytically active intermediate in both sulfoxidation and oxidative hydroxylation.

N-Hydroxyphthalimide: A Hydrogen Atom Transfer Mediator in Hydrocarbon Oxidations Promoted by Nonheme Iron(IV)-Oxo Complexes

The oxidation of a series of hydrocarbons by the nonheme iron(IV)-oxo complex [(N4Py)Fe^IV═O]²⁺ is efficiently mediated by N-hydroxyphthalimide. The increase of reactivity is associated to the oxidation of the mediator to the phthalimide N-oxyl radical, which efficiently abstracts a hydrogen atom from the substrates, regenerating the mediator in its reduced form.

Spectroscopic and Reactivity Comparisons between Nonheme Oxoiron(IV) and Oxoiron(V) Species Bearing the Same Ancillary Ligand

This work directly compares the spectroscopic and reactivity properties of an oxoiron(IV) and an oxoiron(V) complex that are supported by the same neutral tetradentate N-based PyNMe₃ ligand. A complete spectroscopic characterization of the oxoiron(IV) species (2) reveals that this compound exists as a mixture of two isomers. The reactivity of the thermodynamically more stable oxoiron(IV) isomer (2b) is directly compared to that exhibited by the previously reported 1e^--oxidized analogue [Fe^V(O)(OAc)(PyNMe₃)]²⁺ (3). Our data indicates that 2b is 4 to 5 orders of magnitude slower than 3 in hydrogen atom transfer (HAT) from C-H bonds. The origin of this huge difference lies in the strength of the O-H bond formed after HAT by the oxoiron unit, the O-H bond derived from 3 being about 20 kcal·mol^-1 stronger than that from 2b. The estimated bond strength of the Fe^IVO-H bond of 100 kcal·mol^-1 is very close to the reported values for highly active synthetic models of compound I of cytochrome P450. In addition, this comparative study provides direct experimental evidence that the lifetime of the carbon-centered radical that forms after the initial HAT by the high valent oxoiron complex depends on the oxidation state of the nascent Fe-OH complex. Complex 2b generates long-lived carbon-centered radicals that freely diffuse in solution, while 3 generates short-lived caged radicals that rapidly form product C-OH bonds, so only 3 engages in stereoretentive hydroxylation reactions. Thus, the oxidation state of the iron center modulates not only the rate of HAT but also the rate of ligand rebound.

Characterized cis-FeV(O)(OH) intermediate mimics enzymatic oxidations in the gas phase

Fe^V(O)(OH) species have long been proposed to play a key role in a wide range of biomimetic and enzymatic oxidations, including as intermediates in arene dihydroxylation catalyzed by Rieske oxygenases. However, the inability to accumulate these intermediates in solution has thus far prevented their spectroscopic and chemical characterization. Thus, we use gas-phase ion spectroscopy and reactivity analysis to characterize the highly reactive [Fe^V(O)(OH)(^5tips3tpa)]²⁺ (3²⁺) complex. The results show that 3²⁺ hydroxylates C–H bonds via a rebound mechanism involving two different ligands at the Fe center and dihydroxylates olefins and arenes. Hence, this study provides a direct evidence of Fe^V(O)(OH) species in non-heme iron catalysis. Furthermore, the reactivity of 3²⁺ accounts for the unique behavior of Rieske oxygenases. The use of gas-phase ion characterization allows us to address issues related to highly reactive intermediates that other methods are unable to solve in the context of catalysis and enzymology.

Fe^V(O)(OH) species have long been thought to play a role in a range of enzymatic oxidations, but their characterization has remained elusive. Here, using gas-phase ion spectroscopy, the authors characterize an Fe^V(O)(OH) species and find that its reactivity mimics that of Rieske oxygenases.

Synthetic Fe/Cu Complexes: Toward Understanding Heme-Copper Oxidase Structure and Function

Heme-copper oxidases (HCOs) are terminal enzymes on the mitochondrial or bacterial respiratory electron transport chain, which utilize a unique heterobinuclear active site to catalyze the 4H+/4e- reduction of dioxygen to water. This process involves a proton-coupled electron transfer (PCET) from a tyrosine (phenolic) residue and additional redox events coupled to transmembrane proton pumping and ATP synthesis. Given that HCOs are large, complex, membrane-bound enzymes, bioinspired synthetic model chemistry is a promising approach to better understand heme-Cu-mediated dioxygen reduction, including the details of proton and electron movements. This review encompasses important aspects of heme-O2 and copper-O2 (bio)chemistries as they relate to the design and interpretation of small molecule model systems and provides perspectives from fundamental coordination chemistry, which can be applied to the understanding of HCO activity. We focus on recent advancements from studies of heme-Cu models, evaluating experimental and computational results, which highlight important fundamental structure-function relationships. Finally, we provide an outlook for future potential contributions from synthetic inorganic chemistry and discuss their implications with relevance to biological O2-reduction.

H2O2 Oxidation by FeIII-OOH Intermediates and Its Effect on Catalytic Efficiency

The oxidation of the C–H and C=C bonds of hydrocarbons with H₂O₂ catalyzed by non-heme iron complexes with pentadentate ligands is widely accepted as involving a reactive Fe^IV=O species such as [(N4Py)Fe^IV=O]²⁺ formed by homolytic cleavage of the O–O bond of an Fe^III–OOH intermediate (where N4Py is 1,1-bis(pyridin-2-yl)-N,N-bis(pyridin-2-ylmethyl)methanamine). We show here that at low H₂O₂ concentrations the Fe^IV=O species formed is detectable in methanol. Furthermore, we show that the decomposition of H₂O₂ to water and O₂ is an important competing pathway that limits efficiency in the terminal oxidant and indeed dominates reactivity except where only sub-/near-stoichiometric amounts of H₂O₂ are present. Although independently prepared [(N4Py)Fe^IV=O]²⁺ oxidizes stoichiometric H₂O₂ rapidly, the rate of formation of Fe^IV=O from the Fe^III–OOH intermediate is too low to account for the rate of H₂O₂ decomposition observed under catalytic conditions. Indeed, with excess H₂O₂, disproportionation to O₂ and H₂O is due to reaction with the Fe^III–OOH intermediate and thereby prevents formation of the Fe^IV=O species. These data rationalize that the activity of these catalysts with respect to hydrocarbon/alkene oxidation is maximized by maintaining sub-/near-stoichiometric steady-state concentrations of H₂O₂, which ensure that the rate of the H₂O₂ oxidation by the Fe^III–OOH intermediate is less than the rate of the O–O bond homolysis and the subsequent reaction of the Fe^IV=O species with a substrate.

Acid-Triggered O-O Bond Heterolysis of a Nonheme FeIII (OOH) Species for the Stereospecific Hydroxylation of Strong C-H Bonds

A novel hydroperoxoiron(III) species [Fe^III (OOH)(MeCN)(PyNMe₃ )]²⁺ (3) has been generated by reaction of its ferrous precursor [Fe^II (CF₃ SO₃ )₂ (PyNMe₃ )] (1) with hydrogen peroxide at low temperatures. This species has been characterized by several spectroscopic techniques and cryospray mass spectrometry. Similar to most of the previously described low-spin hydroperoxoiron(III) compounds, 3 behaves as a sluggish oxidant and it is not kinetically competent for breaking weak C-H bonds. However, triflic acid addition to 3 causes its transformation into a much more reactive compound towards organic substrates that is capable of oxidizing unactivated C-H bonds with high stereospecificity. Stopped-flow kinetic analyses and theoretical studies provide a rationale for the observed chemistry, a triflic-acid-assisted heterolytic cleavage of the O-O bond to form a putative strongly oxidizing oxoiron(V) species. This mechanism is reminiscent to that observed in heme systems, where protonation of the hydroperoxo intermediate leads to the formation of the high-valent [(Porph^. )Fe^IV (O)] (Compound I).

A mononuclear manganese(iii)–hydroperoxo complex: synthesis by activating dioxygen and reactivity in electrophilic and nucleophilic reactions

A manganese(iii)–peroxo complex was synthesized by activating dioxygen (O₂) and the amphoteric reactivity of a manganese(iii)–hydroperoxo complex was demonstrated in electrophilic and nucleophilic reactions.

Detection of a transient FeV(O)(OH) species involved in olefin oxidation by a bio-inspired non-haem iron catalyst

Here we provide direct evidence for the formation of an Fe^V(O)(OH) species in non-haem iron catalysis using ambient mass spectrometry.