Shape and aggregation control of nanoparticles: not shaken, not stirred

Stirring-Controlled Synthesis of Ultrastable, Fluorescent Silver Nanoclusters

This paper describes how macroscopic stirring of a reaction mixture can be used to produce nanostructures exhibiting properties not readily achievable via other protocols. In particular, it is shown that by simply adjusting the stirring rate, a standard glutathione-based method-to date, used to produce only marginally stable fluorescent silver nanoclusters, Ag NCs-can be boosted to yield nanoclusters retaining fluorescence for unprecedented periods of over 2 years. This enhancement derives not simply from increased homogenization of the reaction mixture but mainly from an appropriately timed delivery of oxygen from above the reaction mixture. In effect, oxygen serves as a reagent that dictates size, structure, stability, and functional properties of the growing nanoobjects.

Green synthesis of sacrificial UV-sensitive core and biobased shell for obtaining optically hollow nanoparticles

Hollow nanoparticles have been extensively studied in recent years. Obtaining such structures with biobased materials, following greener synthetic routes, is still challenging, especially if accurate particle dimensions are required. This work reports the use of an innovative hybrid silica core (Si@azo) containing UV-sensitive molecule, wrapped in biobased multilayer shell composed of polysaccharides. It is a promising strategy for obtaining optically hollow nanoparticles. Indeed, Si@azo cores have the ability to be partially degraded when irradiated with UV light. Combined with a well-controlled and monodisperse diameter, they provide a good basis for layer-by-layer assembly, leading to a multilayer shell with controlled composition and thickness. Finally, UV irradiation of such a core-shell structure is harmless to the polysaccharide shell, but does impact the hybrid silica core, as revealed by turbidity measurements, among other. Each step, i.e. core synthesis, shell addition, and core-shell irradiation, has been carefully characterized at the macro (Fourier-transform infrared spectroscopy - FTIR, Dynamic Light Scattering - DLS, Zeta-potential measurement, Surface Plasmon Resonance - SPR, turbidity) and microscale (Transmission and Scanning Electron Microscopies). Emphasis is put on how turbidity measurements can be related to the core refractive index (ncore), giving information on the state of core degradation and whether the core-shell particle is optically hollow.

Hybrid Nanoparticle-Hydrogel Systems for Drug Delivery Depots and Other Biomedical Applications

Hydrogel-based depots typically tend to remain where injected and have excellent biocompatibility but are relatively poor at controlling drug release. Nanoparticles (NPs) typically have the opposite properties. The smaller the NPs are, the more likely they are to leave the site of injection. Their biocompatibility is variable depending on the material but can be poor. However, NPs can be good at controlling drug release. In these and other properties, combining NPs and hydrogels can leverage their advantages and negate their disadvantages. This review highlights the rationale for hybrid NP-hydrogel systems in drug delivery, the basic methods of producing them, and examples where combining the two systems addressed specific problems.

Green Synthesis of Silver Nanoparticles Using the Cell-Free Supernatant of Haematococcus pluvialis Culture

The green synthesis of silver nanoparticles (AgNPs) using the cell-free supernatant of a Haematococcus pluvialis culture (CFS) was implemented in the current study, under illumination conditions. The reduction of Ag+ to AgNPs by the CFS could be described by a pseudo-first-order kinetic equation at the temperature range tested. A high reaction rate during synthesis and stable AgNPs were obtained at 45 °C, while an alkaline pH (pH = 11.0) and a AgNO3 aqueous solution to CFS ratio of 90:10 (v/v) proved to be the most effective conditions in AgNPs synthesis. A metal precursor (AgNO3) at the concentration range tested (1-5 mM) was the limited reactant in the synthesis process. The synthesis of AgNPs was accomplished under static and agitated conditions. Continuous stirring enhanced the rate of reaction but induced aggregation at prolonged incubation times. Zeta potential and polydispersity index measurements indicated stable AgNPs and the majority of AgNPs formation occurred in the monodisperse phase. The X-ray diffraction (XRD) pattern revealed the face-centered cubic structure of the formed AgNPs, while TEM analysis revealed that the AgNPs were of a quasi-spherical shape with a size from 30 to 50 nm. The long-term stability of the AgNPs could be achieved in darkness and at 4 °C. In addition, the synthesized nanoparticles showed antibacterial activity against Escherichia coli.

Enhancing Photocatalytic Properties of TiO2 Photocatalyst and Heterojunctions: A Comprehensive Review of the Impact of Biphasic Systems in Aerogels and Xerogels Synthesis, Methods, and Mechanisms for Environmental Applications

This review provides a detailed exploration of titanium dioxide (TiO2) photocatalysts, emphasizing structural phases, heterophase junctions, and their impact on efficiency. Key points include diverse synthesis methods, with a focus on the sol-gel route and variants like low-temperature hydrothermal synthesis (LTHT). The review delves into the influence of acid-base donors on gelation, dissects crucial drying techniques for TiO2 aerogel or xerogel catalysts, and meticulously examines mechanisms underlying photocatalytic activity. It highlights the role of physicochemical properties in charge diffusion, carrier recombination, and the impact of scavengers in photo-oxidation/reduction. Additionally, TiO2 doping techniques and heterostructures and their potential for enhancing efficiency are briefly discussed, all within the context of environmental applications.

Supramolecular Polyaniline-Metal Ion as Chiral Nanozymes for Enantioselective Catalysis

Understanding origin of asymmetric information encoded on chiral nanozymes is important in mediating enantioselective catalysis. Herein, the supramolecular chiral nanozymes constructed from P/M-polyaniline (P/M-PANI) nanotwists and metal ions (M2+ , M = Cu, Ni, Co, and Zn) are designed through thioglycolic acid (TA) without chiral molecules to show the regulated catalytic efficiency and enantioselectivity. With combination of chiral environment from supramolecular scaffolds and catalytic center from metal ions, the P-PANI-TA-M2+ as nanozymes show preference to 3,4-dihydroxy-S-phenylalanine (S-DOPA) oxidation while the M-PANI-TA-M2+ show better selectivity to R-DOPA oxidation. Among them, though the Cu2+ doped supramolecular nanotwists show the highest catalytic efficiency, the Co2+ doped ones with moderate catalytic efficiency can exhibit the best enantioselectivity with select factor as high as 2.07. The molecular dynamic (MD) simulation clarifies the mechanism of enantioselective catalysis caused by the differential kinetics with S/R-DOPA enantiomers adsorbed on chiral PANI surface and free in solution. This work systematically studies the synergistic effect between the chiral supramolecular nanostructures assembled by achiral species and metal ions as peroxidase-like catalytic centers to regulate the enantioselectivity, providing deep understanding of the origin of asymmetric catalysis and serving as strong foundation to guide the design of nanozymes with high enantioselectivity.

Biophysical characterization of siRNA-loaded lipid nanoparticles with different PEG content in an aqueous system

Although lipid nanoparticles (LNP) are potential carriers of various pharmaceutical ingredients, further investigation for maintaining their stability under various environmental stressors must be performed. This study evaluated the influence of PEGylation and stress conditions on the stability of siRNA-loaded LNPs with different concentrations of PEG (0.5 mol%; 0.5 % PEG-LNP and 1.0 mol%; 1.0 % PEG-LNP) anchored to their surface. We applied end-over-end agitation, elevated temperature, and repeated freeze and thaw (F/T) cycles as physicochemical stressors of pH and ionic strength. Dynamic light scattering (DLS), flow imaging microscopy (FIM), and ionic-exchange chromatography (IEX) were to determine the degree of aggregation and change in siRNA content. The results indicate that 0.5 % PEG-LNP resisted aggregation only at low pH levels or with salt, whereas 1.0 % PEG-LNP had increased colloidal stability except at pH 4. 0.5 % PEG-LNP withstood aggregation until 71 °C and three cycles of F/T. In contrast, 1.0 % PEG-LNP maintained colloidal stability at 90 °C and seven F/T cycles. Moreover, 1.0 % PEG-LNP had higher siRNA stability under all stress conditions. Therefore, to ensure the stability of LNP and encapsulated siRNA, the PEG concentration must be carefully controlled while considering LNPs' colloidal instability mechanisms under various stress conditions.

Graphene Quantum Dots Nonmonotonically Influence the Horizontal Transfer of Extracellular Antibiotic Resistance Genes via Bacterial Transformation

Graphene quantum dots (GQDs) coexist with antibiotic resistance genes (ARGs) in the environment. Whether GQDs influence ARG spread needs investigation, since the resulting development of multidrug-resistant pathogens would threaten human health. This study investigates the effect of GQDs on the horizontal transfer of extracellular ARGs (i.e., transformation, a pivotal way that ARGs spread) mediated by plasmids into competent Escherichia coli cells. GQDs enhance ARG transfer at lower concentrations, which are close to their environmental residual concentrations. However, with further increases in concentration (closer to working concentrations needed for wastewater remediation), the effects of enhancement weaken or even become inhibitory. At lower concentrations, GQDs promote the gene expression related to pore-forming outer membrane proteins and the generation of intracellular reactive oxygen species, thus inducing pore formation and enhancing membrane permeability. GQDs may also act as carriers to transport ARGs into cells. These factors result in enhanced ARG transfer. At higher concentrations, GQD aggregation occurs, and aggregates attach to the cell surface, reducing the effective contact area of recipients for external plasmids. GQDs also form large agglomerates with plasmids and thus hindering ARG entrance. This study could promote the understanding of the GQD-caused ecological risks and benefit their safe application.

Single-Piece Membrane Supercapacitor with Exceptional Areal/Volumetric Capacitance via Double-Face Print of Electrode/Electrolyte Active Ink

Single-piece flexible supercapacitors (FSCs) have light and ultrathin superiorities, thereby having great potential in portable/wearable electronics. However, all the available single-piece FSCs are fabricated by in situ growth routes, which are incompatible with large-scale technology. This work designs a carboxymethyl cellulose/phytic acid/polyaniline ink, incorporating electrode with electrolyte active compositions. Based on the electrode/electrolyte active ink, a double-face print technique on mixed cellulose ester and nylon membranes to fabricate single-piece membrane-FSCs, where both sides of membranes can be utilized well, is proposed. Consequently, one FSC is measured to be only ≈0.785 cm² in area, ≈0.021 g in weight, and ≈200 µm in thickness, while it has exceptional areal and volumetric capacitances up to 757 mF cm^-2 and 37.8 F cm^-3 , respectively, based on the entire device. It also exhibits high flexibility with a capacitance retention of 98% after 2000 bend cycles from 0° to 180°. The state-of-the-art FSCs are expected to have exciting prospects in portable/wearable electronics, smart reading, and flexible displays. The preparation strategy renders the massive production of large-area and mini-size arrayed FSCs, and also the "do-it-yourself" or homemade preparation, which adds more interest and designability for general users.

Accelerating the Gas-Solid Interactions for Conductometric Gas Sensors: Impacting Factors and Improvement Strategies

Metal oxide-based conductometric gas sensors (CGS) have showcased a vast application potential in the fields of environmental protection and medical diagnosis due to their unique advantages of high cost-effectiveness, expedient miniaturization, and noninvasive and convenient operation. Of multiple parameters to assess the sensor performance, the reaction speeds, including response and recovery times during the gas-solid interactions, are directly correlated to a timely recognition of the target molecule prior to scheduling the relevant processing solutions and an instant restoration aimed for subsequent repeated exposure tests. In this review, we first take metal oxide semiconductors (MOSs) as the case study and conclude the impact of the semiconducting type as well as the grain size and morphology of MOSs on the reaction speeds of related gas sensors. Second, various improvement strategies, primarily including external stimulus (heat and photons), morphological and structural regulation, element doping, and composite engineering, are successively introduced in detail. Finally, challenges and perspectives are proposed so as to provide the design references for future high-performance CGS featuring swift detection and regeneration.

Aqueous processing of organic semiconductors enabled by stable nanoparticles with built-in surfactants

The introduction of oligoether side chains onto a polymer backbone can help to stabilise polymeric dispersions in water without the necessity of surfactants or additives when conjugated polymer nanoparticles are prepared. A series of poly(3-hexylthiophene) (P3HT) derivatives with different content of a polar thiophene derivative 3-((2-methoxyethoxy)methyl)thiophene was interrogated to find the effect of the polar chains on the stability of the formed nanoparticles, as well as their structural, optical, electrochemical, and electrical properties. Findings indicated that incorporation of 10-20 percent of the polar side chain led to particles that are stable over a period of 42 days, with constant particle size and polydispersity, however the particles from the polymer with 30 percent polar side chain showed aggregation effects. The polymer dispersions showed a stronger solid-like behaviour in water with decreasing polar side chain content, while thin film deposition from water was found to afford globular morphologies and crystallites with more isotropic orientation compared to conventional solution-processed films. As a proof-of-principle, field-effect transistors were fabricated directly from the aqueous dispersions demonstrating that polymers with hydrophilic moieties can be processed in water without the requirement of surfactants.

Citrous Lime-A Functional Reductive Booster for Oil-Mediated Green Synthesis of Bioactive Silver Nanospheres for Healthcare Clothing Applications and Their Eco-Mapping with SDGs

Silver nanoparticles (Ag-NPs) are most effective against pathogens and have widely been studied as antibacterial agents in commodity clothing, medical textile, and other hygiene products. However, prolonged utilization of silver and rapid mutation in bacterium stains has made them resistant to conventional silver agents. On the other hand, strict compliance against excessive utilization of toxic reagents and the current sustainability drive is forcing material synthesis toward green routes with extended functionality. In this study, we proposed an unprecedented chemical-free green synthesis of bioactive Ag-NPs without the incorporation of any chemicals. Cinnamon essential oil (ECO) was used as a bio-reducing agent with and without the mediation of lime extract. A rapid reaction completion with better shape and size control was observed in the vicinity of lime extract when incorporated into the reaction medium. The interaction of natural metabolites and citrus compounds with nanoparticles was established using Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy. The application of as-prepared nanoparticles on textiles encompasses extended bioactivity to treated fabric with infused easy-care performance. To the best of our knowledge, this is the first reported instance of utilizing bioactive silver nanoparticles as a functional finish, both as an antimicrobial and as for easy care in the absolute absence of toxic chemicals. The easy-care performance of fabric treated with lime-mediated nanoparticles was found to be 141^O, which is around 26% better than bare cotton without any significant loss in fabric strength. Furthermore, to enlighten the sustainability of the process, the development traits were mapped with the United Nations Sustainable Development Goals (SDGs), which show significant influence on SDGs 3, 8, 9, and 14. With the effective suspension of microorganisms, added functionality, and eco-mapping with SDGs with the chemical-free synthesis of nanoparticles, widespread utilization can be found in various healthcare and hygiene products along with the fulfillment of sustainability needs.

Mn3O4@polyaniline nanocomposite with multiple active sites to capture uranium(VI) and iodide: synthesis, performance, and mechanism

A major challenge for radioactive wastewater treatment and associated environmental remediation is how to simultaneously remove cationic and anionic radionuclides. Herein, a series of Mn₃O₄@polyaniline (Mn₃O₄@PANI) nanocomposites were successfully prepared and used to remove U(VI) and I^- from aqueous solution, two highly concomitant species in nuclear pollution settings. Batch adsorption experiments reveal that the component Mn₃O₄ is predominantly responsible for U(VI) removal, but PANI for I^-. The nanocomposite with 24.2 wt% Mn₃O₄ possesses high removal percentages (> 85%) either for U(VI) or I^- over a wide pH range, fast removal kinetics, and excellent adsorption selectivity at high concentrations of competing ions. Benefiting from the contributions of the two components and the high adsorption affinities, the nanocomposite achieves the simultaneous removal to coexisting U(VI) and I^-, with a maximum adsorption capacity 102.6 mg/g for U(VI) and 126.1 mg/g for I^-. X-ray photoelectron spectroscopy (XPS) results reveal that the U(VI) adsorption occurs via coordination bonding with Mn-O, -NH- , and =N- groups in the nanocomposite, whereas I^- adsorption proceeds mainly through I anionic species exchange with Cl^- and interactions with π-bonds in PANI, as well as the electrostatic attraction onto Mn₃O₄. Considering the excellent performance and multiple active sites, the Mn₃O₄@PANI nanocomposite is promising to remove practical radioactive U(VI) and I^-.

Masterbatch of Chitosan Nanowhiskers for Preparation of Nylon 6,10 Nanocomposite by Melt Blending

Composite materials have been extensively studied to optimize properties such as lightness and strength, which are the advantages of plastics. We prepared a highly concentrated (30 wt %) nylon/chitosan nanowhisker (CSW) masterbatch by blending nylon 6,10 and CSW by solvent casting to achieve high dispersion efficiency while considering an industrial setting. Subsequently, 0.3 wt % nylon/CSW nanocomposites were prepared with a large quantity of nylon 6,10 via melt blending. During preparation, the materials were stirred in the presence of formic acid at different times to investigate the effect of stirring time on the structure of the CSW and the physical properties of the composite. The formation of nanocomposites by the interactions between nylon and CSW was confirmed by observing the change in hydrogen bonding using FT-IR spectroscopy and the rise in melting temperature and melting enthalpy through differential scanning calorimetry. The results demonstrated increases in complex viscosity and shear thinning. The rheological properties of the composites changed due to interactions between CSW and nylon, as indicated by the loss factor. The mechanical properties produced by the nanocomposite stirred for 1.5 h were superior, suggesting that formic acid caused minimal structural damage, thus verifying the suitability of the stirring condition.

Synthesis of Eco-Friendly Silver Nanoparticles Using Glycyrrhizin and Evaluation of Their Antibacterial Ability

In the present study, the biosynthesis of silver nanoparticles (AgNPs) and their antibacterial activity against gram-positive and gram-negative bacteria were investigated. Glycyrrhizin (GL) was used as a reducing agent and stabilizer to rapidly prepare the AgNPs. The distinctive absorption peak at 419 nm confirmed the formation of GL-reduced AgNPs. The TEM and particle size analysis shows that the prepared GL-reduced AgNPs were mostly circular with good dispersion and a relatively uniform particle size of 35 nm on average. Fourier transform infrared spectroscopy analysis was performed to identify the possible biomolecules in the capping and active stabilization of the GL-reduced AgNPs. The antibacterial activity of the GL-reduced AgNPs was analyzed with the Oxford cup diffusion method and filter paper diffusion method. The experimental results show that these properties endowed the GL-reduced AgNPs with high antibacterial activity against Escherichia coli and Staphylococcus aureus and lay a foundation for the use of colloidal silver in antibacterial applications. The GL-reduced AgNPs also had stronger antibacterial activity than sodium citrate-reduced AgNPs, which indicates the advantages of GL-reduced AgNPs compared with sodium citrate-reduced AgNPs in inducing bacteriostasis. The cytotoxicity of GL-reduced AgNPs on human kidney epithelial 293A (HEK293) cells was evaluated via the MTT assay. The results show that GL-reduced AgNPs had lower toxicity to HEK293 cells than sodium citrate-AgNPs, which indicates that the as-prepared GL-reduced AgNPs are environmentally friendly.

DFT modeling of polyaniline: a computational investigation into the structure and band gap of polyaniline

The band gaps of three forms of polyaniline (PANI) are calculated using the DFT method with the B3LYP functional and SV(P) basis set. This marks the first time that the band gap for this polymer has been calculated using this DFT method. The calculations include an investigation of the effect of varying the benzoid–quinoid structural units, the effect of increasing oligomer length, and the inclusion of Michael’s addition structures, which could be residual in the polymer depending on the chosen synthetic method. All results were compared with the experimentally determined band gap of 1.5 eV as typically reported in the literature. A commonly used structural motif of alternating benzoid–quinoid units and a ratio of 0.5:0.5 benzoid–quinoid resulted in a computed band gap of 1.9 eV. Inclusion of one extra quinoid unit gave rise to a band gap of 1.3 eV. Incorporation of a Michael’s addition structure was found to dominate the band gap calculation, yielding a localized LUMO and a band gap of 1.3 eV that was insensitive to the polymer chain length and composition.

4D Microspectroscopy Explores Orientation and Aggregations in π-Conjugated Polymer Films Prepared by Brush Printing

The orientation of polymers improves their mechanical, electrical, and optical properties, but aggregates alter these properties. Unfortunately, there is no definitive way to control aggregates and quantify orientations by distinguishing between polymer chains and aggregates. Herein, we show 4D microspectroscopy to examine brush-printed oriented films of π-conjugated polymers. Three-dimensional (x-y-z) and 1D (photon energy) components based on polarized-fluorescence spectra and film thickness at identical positions were measured. Stochastic analysis of 4D data for a brush-printed OLED film (30 × 30 μm², 900 pixels) distinguished orientations of polymer chains and their aggregates with a 1 μm x-y resolution and a z-range of 20-1800 nm. Polymer chains in thin regions (t < 50 nm) were oriented parallel to the brush-printing direction, whereas aggregates were oriented perpendicularly in thicker regions (t > 1000 nm). This difference was attributed to shear stress, uneven thickness, and capillary forces. The generality of the 4D method was also examined using conventional drop casting.

Gelation Behavior and Stability of Multicomponent Sterol-Based Oleogels

Novel fat mimetic materials, such as oleogels, are advancing the personalization of healthier food products and can be developed from low molecular weight compounds such as γ-oryzanol and β-sitosterol. Following molecular assembly, the formation of a tubular system ensues, which seems to be influenced by elements such as the oleogelators' concentration and ratio, cooling rates, and storage periods. Sterol-based oleogels were formulated under distinct environmental conditions, and a comprehensive study aimed to assess the effects of the mentioned factors on oleogel formation and stability, through visual observation and by using techniques such as small-angle X-ray scattering, X-ray diffraction, confocal Raman spectroscopy, rheology, and polarized microscopy. The long, rod-like conformations, identified by small-angle X-ray scattering, showed that different cooling rates influence oleogels' texture. Raman spectra showed that the stabilization time is associated with the interfibrillar aggregation, which occurred differently for 8 and 10 wt%, with a proven relationship between ferulic acid and the tubular formation. This report gives fundamental insight into the critical point of gelation, referring to the time scale of the molecular stabilization. Our results verify that understanding the structuring mechanisms of oleogelation is decisive for the processing and manufacturing of novel foods which integrate oleogels in their structure.

Doped-polyaniline based sorbents for the simultaneous removal of heavy metals and dyes from water: Unravelling the role of synthesis method and doping agent

Recently, the engineering of alternative adsorbents with better functional and sorbing ability towards the purification of wastewaters has received much attention from the scientific community. Currently polymers, in particular, are regarded as attractive soft materials in the field of environmental remediation due to their several unique properties. In this regard, the synthesis method is key point to fabricate polymer-based adsorbent with targeted characteristics. In the present work, four polyaniline (PANIs) samples were synthesized by two alternative chemical approaches, a traditional one and an eco-friendly one, and two different dopants were used, HCl and H₂SO_4, respectively. All PANIs were characterized for their thermal, optical, morphological, and structural properties and their capability to remove simultaneously dyes and heavy metals from water have been investigated. It was deduced that the sorption ability is dependent on the as-synthesized PANI using different procedures and dopants. All the PANIs from traditional method showed high levels of pollutants removal (from 89 to 97%). Even though the materials obtained from the green way are overall less active, H₂SO₄-doped corresponding polymer showed high sorption capability (75-97%). Finally, the most performing PANIs were selected for recycling tests exhibiting high sorption efficiency retention up to four runs without any regeneration treatment. Most important, the cycling tests were stopped well before the sample sorption limit could be reached.

Norfloxacin Loaded Lipid Polymer Hybrid Nanoparticles for Oral Administration: Fabrication, Characterization, In Silico Modelling and Toxicity Evaluation

Norfloxacin (NOR), widely employed as an anti-bacterial drug, has poor oral bioavailability. Nano based drug delivery systems are widely used to overcome the existing oral bioavailability challenges. Lipid–Polymer Hybrid Nanoparticles (LPHNs) exhibit the distinctive advantages of both polymeric and liposomes nanoparticles, while excluding some of their disadvantages. In the current study, NOR loaded LPHNs were prepared, and were solid amorphous in nature, followed by in vitro and in vivo evaluation. The optimized process conditions resulted in LPHNs with the acceptable particle size 121.27 nm, Polydispersity Index (PDI) of 0.214 and zeta potential of −32 mv. The addition of a helper lipid, oleic acid, and polymers, ethyl cellulose, substantially increased the encapsulation efficiency (EE%) (65% to 97%). In vitro study showed a sustained drug release profile (75% within 12 h) for NOR LPHNs. The optimized NOR LPHNs showed a significant increase (p < 0.05) in bioavailability compared to the commercial product. From the acute toxicity study, the LD50 value was found to be greater than 1600 mg/kg. The molecular modelling studies substantiated the experimental results with the best combination of polymers and surfactants that produced highly stable LPHNs. Therefore, LPHNs proved to be a promising system for the delivery of NOR, as well as for other antibiotics and hydrophobic drugs.

Preparation of Poly(Ionic Liquid) Microbeads via Cooling-Assisted Phase Separation Method

A simple and large-scale non-chemical preparation of uniform poly(ionic liquid) (PIL) microbeads via a cooling-assisted phase separation (CAPS) method is reported. For this method, PIL bulk is dissolved to form a saturated solution in a mixed solvent composed of good solvent and non-solvent at a relatively high temperature. Then, the uniform PIL microbeads are prepared by cooling the solution to room temperature or a lower temperature in the absence of stabilizer. The size of microbeads can be controlled by adjusting the preparation parameters, including PIL concentration, cooling rate, and agitation state. The scale of preparation can be up to 10 g, and the yield of PIL microbeads is more than 70% or 88% when the solution is cooled to room temperature or 0 °C, respectively. The formation mechanism of PIL microbeads is discussed by tracing the nucleation and growth process by the transmittance of light of the solution during cooling. The application of this CAPS method to other polymer microbeads preparation is finally discussed by choosing different good solvent and non-solvent.

Enhanced Storage Performance of PANI and PANI/Graphene Composites Synthesized in Protic Ionic Liquids

Polyaniline (PANI) was synthesized using oxidative polymerization in a mixture of water with pyrrolidinium hydrogen sulfate [Pyrr][HSO₄], which is a protic ionic liquid PIL. The obtained PANI (PANI/PIL) was compared with conventional PANI (PANI/HCl and PANI/HSO₄) in terms of their morphological, structural, and storage properties. The results demonstrate that the addition of this PIL to a polymerization medium leads to a fiber-like morphology, instead of a spherical-like morphology, of PANI/HSO₄ or an agglomerated morphology of PANI/HCl. In addition, PAN/PIL exhibits an improvement of the charge transfer kinetic and storage capability in H₂SO₄ 1 mol·L^-1, compared to PANI/HCl. The combination of PANI/PIL and graphene oxide (GO), on the other hand, was investigated by optimizing the PANI/GO weight ratio to achieve the nanocomposite material with the best performance. Our results indicate that the PANI/PIL/GO containing 16 wt% of GO material exhibits a high performance and stability (223 F·g^-1 at 10 A·g^-1 in H₂SO₄ 1 mol·L^-1, 4.9 Wh·Kg^-1, and 3700 W·Kg^-1 @ 10 A·g^-1). The obtained results highlight the beneficial role of PIL in building PANI and PANI/GO nanocomposites with excellent performances for supercapacitor applications.

Optimization of Novel Naproxen-Loaded Chitosan/Carrageenan Nanocarrier-Based Gel for Topical Delivery: Ex Vivo, Histopathological, and In Vivo Evaluation

Naproxen (NAP) is commonly used for pain, inflammation, and stiffness associated with arthritis. However, systemic administration is linked with several gastrointestinal tract (GIT) side effects. The present work aims to prepare and evaluate NAP nanoparticulate shells of chitosan (CS) and carrageenan (CRG) loaded into a Carbopol 940 (Ca-940) gel system with unique features of sustained drug delivery as well as improved permeation through a topical route. Moreover, this study aims to evaluate its ex vivo, histopathological, and in vivo anti-inflammatory activity in albino Wistar rats. The percentage of ex vivo drug permeation patterns in the optimized formulation (No) was higher (88.66%) than the control gel (36.195%). Oral toxicity studies of developed nanoparticles in albino rabbits showed that the NAP-loaded CS/CRG are non-toxic and, upon histopathological evaluation, no sign of incompatibility was observed compared to the control group. A In Vivo study showed that the optimized gel formulation (No) was more effective than the control gel (Nc) in treating arthritis-associated inflammation. The sustained permeation and the absence of skin irritation make this novel NAP nanoparticle-loaded gel based on CS/CRG a suitable drug delivery system for topical application and has the potential for improved patient compliance and reduced GIT-related side effects in arthritis.

Liquid-liquid interfaces: a unique and advantageous environment to prepare and process thin films of complex materials

Thin film technology is pervasive for many fields with high impact in our daily lives, which makes processing materials such as thin films a very important subject in materials science and technology. However, several paramount materials cannot be prepared as thin films through the well-known and consolidated deposition routes, which strongly limits their applicability. This is particularly noticeable for multi-component and complex nanocomposites, which present unique properties due to the synergic effect between the components, but have several limitations to be obtained as thin films, mainly if homogeneity and transparence are required. This review highlights the main advances of a novel approach to both process and synthesize different classes of materials as thin films, based on liquid/liquid interfaces. The so-called liquid/liquid interfacial route (LLIR) allows the deposition of thin films of single- or multi-component materials, easily transferable over any kind of substrate (plastics and flexible substrates included) with precise control of the thickness, homogeneity and transparence. More interesting, it allows the in situ synthesis of multi-component materials directly as thin films stabilized at the liquid/liquid interface, in which problems related to both the synthesis and processing are solved together in a single step. This review presents the basis of the LLIR and several examples of thin films obtained from different classes of materials, such as carbon nanostructures, metal and oxide nanoparticles, two-dimensional materials, organic and organometallic frameworks, and polymer-based nanocomposites, among others. Moreover, specific applications of those films in different technological fields are shown, taking advantage of the specific properties emerging from the unique preparation route.

Effect of face-to-face and side-to-side interchain interactions on the electron transport in emeraldine salt polyaniline

Polyaniline (PANI) is a conductive polymer that has been studied intensively due to its high conductivity, ease of synthesis, fascinating doping mechanism, and a broad spectrum of applications. Polyaniline doped HCl was synthesized by a common direct-oxidation method of aniline using ammonium persulfate as the oxidant in HCl solution at various temperatures. This study focused on conductivity alteration of PANI-ES (emeraldine salt) due to the interchain interaction observed at different reaction temperatures from room temperature down to -15 °C. The molecular structure of PANI-ES was determined by FTIR and Raman spectroscopy. At low reaction temperature, the electronic transport properties improve significantly as reflected by its conductivity. X-ray diffraction (XRD) analysis shows that the value d_{(110)} and β play an important role in electron transport through face-to-face and side-to-side interactions, respectively. Scanning electron microscopy (SEM) analysis shows that the morphology of the synthesized PANI-ES consists of granules that are interconnected by nanofibers. Here, the correlation between electronic transport properties, structure, and morphology induced by reaction temperature was analyzed and discussed in detail. Moreover, PANI ES synthesized at 0 °C was applied as an electrocatalytic active layer in the DSSC's counter-electrode with a promising result.

Ag2[Fe(CN)5NO]-Fabricated Hydrophobic Cotton as a Potential Wound Healing Dressing: An In Vivo Approach

There have been reports of different types of wound dressings for various functions and purposes. Cotton being one of the most widely used wound dressing material due to its non-toxic, biodegradable, and other properties is used for fabrication as well as in the form of scaffolds for faster and effective wound closure. Our research team has already demonstrated the role of silver nitroprusside nanoparticles (SNPNPs) for wound healing and antibacterial activity. In the current study, we have developed cotton fabric impregnated with SNPNPs (SNPCFs) which remain photo inert and displayed long-term antimicrobial activity due to the surface modification with the silver nitroprusside complex. These SNPCFs were characterized by various analytical techniques (XRD, FTIR, UV spectroscopy, TGA, TEM, FESEM, EDAX, ICP-OES). The fabricated cotton dressings with nanoparticles showed an improved water contact angle (113-130°) than that of bare cotton gauze (60°) and exhibited more antibacterial property in case of both Gram-negative bacteria (Klebsiella aerogenes and Escherichia coli) and Gram-positive bacteria (Pseudomonas aeruginosa and Bacillus subtilis) even after several washings. The biocompatible nature of SNPCFs was assessed by in vivo chorioallantoic membrane assay that showed no obstruction in the formation of blood vessels. The SNPCFs exhibited better wound healing activity compared to the bare cotton and AgCFs as observed in the C57BL6/J mouse. The histopathological investigation reveals increase in re-epithelialization and deposition of connective tissue. The macrophage (M2) counts in SNPCF-treated skin tissues were supportive of more wound healing activity than mice treated with cotton fabric impregnated with chemically synthesized silver nanoparticles. Based on biodistribution analysis using ICP-OES, the data illustrated that a significant amount of silver is absorbed in the skin tissues of mice as compared to the blood and kidney. Furthermore, the absence of silver from the vital organs (heart, liver, and kidney) corroborates our hypothesis that the SNPCFs can act excellently in treating wounds when topically applied over skin. Thereafter, all these results highlight a strong possibility that SNPCFs exemplify the potential as a new antimicrobial and wound healing agent in future times.

Molecular Imprints Frozen by Strong Intermolecular Interactions in Place of Cross-Linking

A new way to freeze molecular imprints in a polymer material is reported. So far, molecular imprinted polymers (MIP) involve copolymerization of a functional monomer and large amounts of cross-linking agent, which keeps the template shape memory in rigid molecular imprints. MIP materials are prepared herein without cross-linking agent. Stiff chains of polyaniline grafted on a solid support as a brush-like material achieve the necessary rigidity. Differential adsorption to imprinted and non-imprinted materials provides evidence of molecular imprints. A correct adsorption isotherm for mobile adsorbed layers (Volmer isotherm) is introduced instead of the popular but inadequate Langmuir isotherm. Non-selective adsorption is entropic, whereas adsorption to molecular imprints has an enthalpic contribution coming from specific interactions. Fast adsorption kinetics are a definite benefit with regards to applications such as chromatographic separations and chemical sensors.

Fabrication of polyaniline–graphene oxide hybrid nanocomposites by green interfacial polymerization for all-solid-state supercapacitors and enzymatic glucose sensors

PANI-GO hybrid nanocomposites by the green interfacial polymerization method for electrochemical capacitors and glucose sensors.

Effect of different conditions of synthesis on properties of silver nanoparticles stabilized by nanocellulose from carrot pomace

The silver nanoparticles (AgNPs) can exhibit different optical properties depending on their size and shape as a result of synthesis method and the stabilizer used. In this research the synthesis of AgNPs in the presence of nanocellulose obtained from carrot pomace was investigated. The influence of silver nitrate concentration, temperature and mechanical agitation on size and shape of AgNPs was studied. The mixing of reagents during synthesis, regardless temperature, led to obtain AgNPs of various sizes and shapes. It was confirmed by different colors of samples with absorbance maximum from 334 to 779 nm, the transmission electron microscopy images and dynamic light scattering results. In unmixed samples only spherical nanoparticles with absorbance maximum at 408 nm were observed. Obtained results have demonstrated that mechanical agitation and an appropriate silver nitrate concentration combined with stabilizing effect of nanocellulose allow to obtain AgNPs in different shapes and sizes.

Polyaniline Hybrid Nanofibers via Green Interfacial Polymerization for All-Solid-State Symmetric Supercapacitors

In this study, we report an enormously simple green approach for the synthesis of polyaniline hybrid (PANI-SO) nanofibers in emeraldine salt form. We have carried out the synthesis via an interfacial polymerization method using vegetable oil as an organic phase instead of the commonly used solvents like CHCl₃, CCl₄, etc. Characterization techniques such as Fourier transform infrared (FTIR), UV-visible, powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) have been used for studying the synthesized polyaniline hybrid nanofibers. An interesting observation is the crystallization of small organic molecules in the PANI matrix. PANI-SO shows a pseudocapacitance behavior with a capacitance value of 302 F g^-1 at a current density of 1 A g^-1. In addition, the material shows an energy density of 26.8 W h kg^-1 and a maximum power density of 402.6 W kg^-1. Furthermore, the PANI-SO electrode maintains about 84% of the initial capacitance after 1000 cycles. Similarly, the PANI-SO symmetric solid-state supercapacitor shows an areal capacitance of 118.7 mF cm^-2 and retains a stability of 80% even after 1000 cycles. Thus, the PANI-SO electrode shows a good cyclic performance, which implies the structural stability of PANI-SO nanofibers. The electrochemical properties of PANI-SO are compared with those of PANI nanofibers synthesized by taking CHCl₃ as the organic phase and keeping all other parameters identical. PANI-SO is observed to be a superior material compared to the latter one. All electrochemical analyses show that the PANI synthesized using cooking soyabean oil (PANI-SO) is an effective supercapacitor material.

Therapeutic Nanoparticles and Their Targeted Delivery Applications

Nanotechnology offers many advantages in various fields of science. In this regard, nanoparticles are the essential building blocks of nanotechnology. Recent advances in nanotechnology have proven that nanoparticles acquire a great potential in medical applications. Formation of stable interactions with ligands, variability in size and shape, high carrier capacity, and convenience of binding of both hydrophilic and hydrophobic substances make nanoparticles favorable platforms for the target-specific and controlled delivery of micro- and macromolecules in disease therapy. Nanoparticles combined with the therapeutic agents overcome problems associated with conventional therapy; however, some issues like side effects and toxicity are still debated and should be well concerned before their utilization in biological systems. It is therefore important to understand the specific properties of therapeutic nanoparticles and their delivery strategies. Here, we provide an overview on the unique features of nanoparticles in the biological systems. We emphasize on the type of clinically used nanoparticles and their specificity for therapeutic applications, as well as on their current delivery strategies for specific diseases such as cancer, infectious, autoimmune, cardiovascular, neurodegenerative, ocular, and pulmonary diseases. Understanding of the characteristics of nanoparticles and their interactions with the biological environment will enable us to establish novel strategies for the treatment, prevention, and diagnosis in many diseases, particularly untreatable ones.

Facile in-situ polymerization of polyaniline-functionalized melamine sponge preparation for mass spectrometric monitoring of perfluorooctanoic acid and perfluorooctane sulfonate from biological samples

In this present work, a novel polyaniline-functionalized melamine sponge (PMs) was successfully prepared using a simple unstirred in-situ polymerization process. The PMs was characterized using a scanning electron microscope and contact angle measurements. Its adsorption performance was initially determined via dye adsorption assays, and the conditions affecting the synthesis including polymerization time, acidity, molar ratio, and number and sizes of raw melamine sponge were optimized. The PMs was then used as an efficient adsorbent for the development of a novel, low-cost method for the detection of two representative perfluorinated chemicals, perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), using ultra-performance liquid chromatography-triple quadrupole mass spectrometry (UPLC-QqQ-MS/MS) with the internal standard method. To achieve the best extraction efficiency with this method, several variables were optimized, including adsorption time, pH value, the number of PMs, and desorption conditions. Calibration graphs showed a good linear degree at concentration ranging from 0.1 to 50 μg L^-1 for PFOA and 0.01-10 μg L^-1 for PFOS, with a coefficient of detection R² = 0.998. The intra-day and inter-day relative standard deviations were found to range from 5.9% to 8.2% for PFOA, and 5.5% to 7.7% for PFOS. Under these optimized conditions, the method was successfully used to measure PFOA and PFOS content in real human serum and urine samples, with average spiked recoveries ranging from 79% and 91% for PFOA, and 81% to 87% for PFOS.

PANI@UiO-66 and PANI@UiO-66-NH2 Polymer-MOF Hybrid Composites as Tunable Semiconducting Materials

This investigation explores optimum synthetic conditions for novel polymer-metal organic framework hybrid composites composed of Zr-terephthalate-based MOF UiO-66 and conductive polyaniline (PANI) nanofibers in an effort to optimize conductivity while minimizing MOF structural deformation. Successful syntheses of self-assembled PANI nanofibers in PANI@UiO-66 and PANI@UiO-66-NH₂ composites were confirmed using scanning electron microscopy, infrared spectroscopy, and powder X-ray diffraction. The polymer-MOF composites show different bonding synergies to the PANI nanofibers depending on the organic linker used. Electronic properties of the post-synthetically modified PANI@UiO-66 and PANI@UiO-66-NH₂ were investigated using UV-vis diffuse reflectance spectroscopy. Sheet resistivity of the self-assembled polymer-MOF composites was determined under an inert atmosphere at room temperature using four-point probe measurements to confirm tunable semiconductivity ranging from 40 to 2 mS/sq. Furthermore, the effects of aniline oxidation on the crystallinity and coordination of UiO-66 and UiO-66-NH₂ were determined through analysis of these results.