X-ray Photoelectron Spectroscopy and First Principles Calculation of BCN Nanotubes

Ratiometric fluorescence probe based on boric acid-modified carbon dots and alizarin red for sensitive and rapid detection of glyphosate

By combining boric acid-modified carbon dots (p-CDs) and alizarin red (ARS), a double emission probe p-CDs@ARS with fluorescence at 410 nm and 600 nm is designed for the detection of glyphosate. When Cu2+ is added, it binds with ARS to cause ARS release from p-CDs@ARS, which decreases the fluorescence at 600 nm. However, in the presence of glyphosate, glyphosate competes to the binding of Cu2+, releasing ARS to bind with p-CDs again. Therefore, the fluorescence of 600 nm recovers. Based on this, the fluorescence of 410 nm and 600 nm act as the reference and response signal, respectively, achieving the ratiometric fluorescence detection of glyphosate. The linear range of glyphosate detection is 0.5-50 µM with a limit of detection at 0.37 µM which is well below the maximum residue limit for glyphosate in food. When the probe is used to detect the glyphosate residue in Pearl River water and cucumber, the detection results are well consistent with those detected by HPLC. The established method based on p-CDs@ARS has the advantages that the assembly of ratiometric fluorescence probe is simple, and the detection speed is fast. Additionally, a typical INHIBIT logical system has been successfully constructed based on glyphosate, Cu2+, and the fluorescence signal of p-CDs@ARS.

Boron-Nitrogen-Edged Biomass-Derived Carbon: A Multifunctional Approach for Colorimetric Detection of H2O2, Flame Retardancy, and Triboelectric Nanogenerator

Enhancing the concentration and type of nitrogen (N) dopants within the Sp2-carbon domain of carbon recycled from biomass sources is an efficient approach to mimic CNT, GO, and rGO to activate oxidants such as H2O2, excluding toxic chemicals and limiting reaction steps. However, monitoring the kind and concentration of N species in the Sp2-C domain is unlikely with thermal treatments only. A high temperature for graphitization reduces N moieties, leading to low electron density. This inhibits H2O2 adsorption and activation on catalyst surfaces. In this study, coffee waste (CW) is converted into B, N-doped biochar (BXNbY) using boric acid-assisted pyrolysis (H3BO3 mass = X and carbonization temperature = Y) under N2 to overcome the challenge. The B dopant regulates the concentration and type of N, provides Lewis's acid sites, and converts graphitic-N to pyridine-N in BXNbY. The optimized B3Nb900 exhibits excellent colorimetric sensing performance toward H2O2 with a low detection limit (36.9 nM) and high selectivity in the presence of many interferences and milk samples due to high pyridinic-N and Sp2 domain sizes. Interestingly, B enhances other properties of N-containing CW-derived carbon and introduces self-extinguishing and tribopositive properties. Hence, BXNbY-coated polyurethane foam shows excellent flame retardancy and energy harvesting performance.

Harnessing halogen bond donors for enhanced nitrogen reduction: a case study on metal-free boron nitride single-atom catalysts

Developing efficient catalysts for ammonia synthesis is increasingly crucial but remains a formidable challenge due to the lack of robust design criteria, particularly in addressing the activity and selectivity issues, especially in electrochemical nitrogen reduction reactions (NRR). In this study, we systematically investigated the catalytic potential of hexagonal boron nitride (BN) embedded with non-metal (C, Si, P and S) atoms as an electrocatalyst for the nitrogen reduction reaction using density functional theory (DFT) computations. The preference for non-metal-doped BN nanomaterials stems from their ability to suppress hydrogen evolution and their environmentally friendly nature, in contrast to transition metals. Among the designed single-atom catalysts (SACs), Si-doped boron nitride (SiBBN) exhibits a favorable inclination toward activating nitrogen, which is determined by the combination of advantageous molecular orbital coupling and formation of a covalent bond with the N2 molecule. Under thermal conditions, the first protonation step emerges as the rate-determining step (22.66 kcal mol-1) for SiBBN. Conversely, under electrochemical conditions, the final elementary step becomes the potential-determining step (PDS) with 2.38 eV. We explored the impact of the exogenous addition of Lewis acids (alkali metal ions, neutral boron Lewis acids, and halogen bond donors) on modulating the electrochemical NRR activity. Our results highlight the pivotal role of halogen bond donors as catalytic promoters in facilitating electron density transfer through activated N2, establishing a push-pull charge transfer mechanism that populates the distal nitrogen more than the proximal nitrogen. This facilitates the potential requirements for the first reduction step. The synergistic effect of both halogen bonding and hydrogen bonding interactions in the final reduction step was proven to be the main determinant for a significant reduction in the PDS from 2.38 to 0.10 V. Notably, this study unveils the pioneering role of halogen bond donors as promoters for NRR, providing valuable insights into the development of robust metal-free catalysts and promoters in experimental research.

Controllable Exfoliation of MOF-Derived Van Der Waals Superstructure into Ultrathin 2D B/N Co-Doped Porous Carbon Nanosheets: A Superior Catalyst for Ambient Ammonia Electrosynthesis

The electrocatalytic nitrogen reduction reaction (NRR) to synthesize NH₃ under ambient conditions is a promising alternative route to the conventional Haber-Bosch process, but it is still a great challenge to develop electrocatalysts' high Faraday efficiency and ammonia yield. Herein, a facile and efficient exfoliation strategy to synthesize ultrathin 2D boron and nitrogen co-doped porous carbon nanosheets (B/NC NS) via a metal-organic framework (MOF)-derived van der Waals superstructure, is reported. The results of experiments and theoretical calculations show that the doping of boron and nitrogen can modulate the electronic structure of the adjacent carbon atoms; which thus, promotes the competitive adsorption of nitrogen and reduces the energy required for ammonia synthesis. The B/NC NS exhibits excellent catalytic performance and stability in electrocatalytic NRR, with a yield rate of 153.4 µg·h^-1 ·mg^-1 cat and a Faraday efficiency of 33.1%, which is better than most of the reported NRR electrocatalysts. The ammonia yield of B/NC NS can maintain 92.7% of the initial NRR activity after 48 h stability test. The authors' controllable exfoliation strategy using MOF-derived van der Waals superstructure can provide a new insight for the synthesis of other 2D materials.

Modeling of BN-Doped Carbon Nanotube as High-Performance Thermoelectric Materials

Ternary BNC nanotubes were modeled and characterized through a periodic density functional theory approach with the aim of investigating the influence on the structural, electronic, mechanical, and transport properties of the quantity and pattern of doping. The main energy band gap is easily tunable as a function of the BN percentage, the mechanical stability is generally preserved, and an interesting piezoelectric character emerges in the BNC structures. Moreover, C@(BN)1-xCx double-wall presents promising values of the thermoelectric coefficients due to the combined lowering of the thermal conductivity and increase of charge carriers. Computed results are in qualitative agreement with the little experimental evidence and therefore can provide insights on an atomic scale of the real samples and direct the synthesis towards increasingly performing hybrid nanomaterials.

A versatile biomimetic multienzyme cascade nanoplatform based on boronic acid-modified metal-organic framework for colorimetric biosensing

The combination of bio- and chemo-catalysts for sequential cascades has received considerable attention in analytical fields because of the regulable catalytic efficiency and selectivity under various physiological conditions. In this paper, a versatile multienzyme cascade nanoplatform with excellent activity for biosensing is demonstrated by combining metal-organic framework (MOF)-based nanozyme with natural enzymes. A boronic acid-modified MOF, MIL-100(Fe)-BA, was obtained via a microwave-assisted metal-ligand-fragment co-assembly strategy. On the one hand, MIL-100(Fe)-BA could serve as a nanozyme with dual oxidase/peroxidase bioactivity to detect glutathione and ascorbic acid with a detection limit of 0.12 μM and 0.09 μM, respectively. On the other hand, the hierarchically porous MIL-100(Fe)-BA possesses adequate recognition sites for immobilizing enzymes with acceptable protein leakage, enabling it to act like a scaffold for the fixation of a single enzyme (sarcosine oxidase) or bi-enzymes (acetylcholinesterase/choline oxidase) and guide a multienzyme cascade reaction system with high efficiency. The cascade nanoplatform has merits of both artificial nanozymes and natural enzymes, providing satisfactory sarcosine/acetylcholine sensing ability with detection limits of 0.26 μM and 1.18 μM. The developed catalytic system not only expands the application of nanozymes in tandem enzymatic bio-catalysis, but provides a facile and efficient multienzyme cascade nanoplatform for biosensing and other applications.

In-situ synthesis of non-phase-separated boron carbon nitride for photocatalytic reduction of CO2

Non-phase-separated hexagonal boron carbon nitride (h-BCN) is an emerging type of promising metal-free photocatalyst, but the synthesis of this material remains quite challenging. Here, h-BCN without phase separation was obtained through a novel organic-inorganic hybrid precursor pyrolysis method using boric acid and ethylenediamine as raw materials. The resultant BCN-1 exhibited excellent photocatalytic activity for CO₂ reduction, as confirmed by a CO generation rate of 13.97 μmol g^-1 h^-1 under visible light illumination with no co-catalyst or sacrificial agent. This rate was 9.4 times higher than that of g-C₃N₄ (2.1 μmol g^-1 h^-1) under the same experimental condition. The pre-existing C-N-B bond is essential for mediating the growth kinetics and diminishing the thermodynamically preferred C and BN phase-segregation structure, while ammonia is crucial for C-N-B bond fixation and pore formation during the pyrolysis process. This finding of a facile method for synthesizing non-phase-separated BCN has positive effects on the study of photocatalytic CO₂ reduction by sustainable metal-free catalysts.

In-Situ Synergistic 2D/2D MXene/BCN Heterostructure for Superlative Energy Density Supercapacitor with Super-Long Life

The 2D/2D layered materials are gaining much-needed attention owing to the unprecedented results in supercapacitors by their robust structural and electrochemical compatibility. Here, a facile scalable synthesis of 2D/2D MXene/boron carbon nitride (BCN) heterostructure through no residue direct pyrolysis is reported. The process allows the in-situ growth of BCN nanosheets unravelling the surfaces of MXene synergistically that provide an interconnected conductive network with wide potential window, augmented proportion of Ti sites at elevated temperature removing terminal groups enabling high pseudocapacitive activity and impressive stability. As a result, the as-assembled MXene/BCN electrode records a high specific capacitance of 1173 F g^-1 (1876 C g^-1 ) at 2 A g^-1 and an energy density of 45 Wh kg^-1 . Further, the fabricated solid-state device exhibits an ultra-high cyclability of 100% capacitive retention after 100 000 cycles. This will be an epitome for future 2D/2D heterostructures with commendable electrochemical properties as an expedient solution for energy storage applications.

In Vitro and In Vivo Biocompatibility of Boron/Nitrogen Co-Doped Carbon Nano-Onions

Boron/nitrogen, co-doped, carbon nano-onions (BN-CNOs) have recently shown great promise as catalysts for the oxygen reduction reaction, due to the improved electronic properties imparted by the dopant atoms; however, the interactions of BN-CNOs with biological systems have not yet been explored. In this study, we examined the toxicological profiles of BN-CNOs and oxidized BN-CNOs (oxi-BN-CNOs) in vitro in both healthy and cancer cell lines, as well as on the embryonic stages of zebrafish (Danio rerio) in vivo. The cell viabilities of both cell lines cells were not affected after treatment with different concentrations of both doped CNO derivatives. On the other hand, the analysis of BN-CNOs and oxidized BN-CNO interactions with zebrafish embryos did not report any kind of perturbations, in agreement with the in vitro results. Our results show that both doped CNO derivatives possess a high biocompatibility and biosafety in cells and more complex systems.

B,N-Codoped Porous C with Controllable N Species as an Electrode Material for Supercapacitors

Manufacturing heteroatom-doped porous C with controllable N species is an important issue for supercapacitors. Herein, we report a low-cost and simplified strategy for synthesizing B,N-codoped porous C (BNPC) by a freeze-drying chitosan-boric acid aerogel beads and subsequent carbonization treatment. The BNPC samples were studied using various characterization technologies. The introduction of boric acid to chitosan successfully induced the formation of B,N-codoped C with a well-developed 3D interconnected porous structure. The B doping had a significant impact on the distribution of N species in the samples. Moreover, the good wettability of the sample resulting from B doping is favorable for electrolyte diffusion and ion transport. As a consequence, the optimal BNPC sample showed an excellent specific capacitance of 240 F g^-1 at 0.5 A g^-1 and an outstanding capacitance retention of 95.1% after 10000 cycles at 5 A g^-1. An assembled symmetrical supercapacitor displayed an energy density of 11.4 Wh kg^-1 at a power density of 250 W kg^-1. The proposed work provides a simple and effective method to obtain B,N-codoped C-based materials with high electrochemical performance.

Self-supporting Atmosphere-Assisted Synthesis of 1D Mo2 C-based Catalyst for Efficient Hydrogen Evolution

One-dimensional materials exhibit fascinating properties in electrocatalytic applications but their fabrication faces the challenge of tedious and complicated operations. We have developed a bottom-up strategy to construct a 1D metal carbide catalyst (Mo₂ C@NC) consisting of ultrafine Mo₂ C nanoparticles embedded within nitrogen-doped carbon layers by simply calcining a mixture of ammonium molybdate, urea and melamine. Experimental results and thermodynamic calculations demonstrate that the retainable pyrolysis-generated self-supporting atmosphere plays a crucial role in the crystalline phase and morphology of materials. When functioned as an electrocatalyst for the hydrogen evolution reaction (HER), the achieved Mo₂ C@NC presents an excellent catalytic activity as well as outstanding stability. This work could shed fresh light onto the facile synthesis of effective HER catalysts with 1D nanostructure.

Synergistic Effect of Boron Nitride and Carbon Domains in Boron Carbide Nitride Nanotube Supported Single-Atom Catalysts for Efficient Nitrogen Fixation

Developing the low-cost and efficient single-atom catalysts (SACs) for nitrogen reduction reaction (NRR) is of great importance while remains as a great challenge. The catalytic activity, selectivity and durability are all fundamentally related to the elaborate coordination environment of SACs. Using first-principles calculations, we investigated the SACs with single transition metal (TM) atom supported on defective boron carbide nitride nanotubes (BCNTs) as NRR electrocatalysts. Our results suggest that boron-vacancy defects on BCNTs can strongly immobilize TM atoms with large enough binding energy and high thermal/structural stability. Importantly, the synergistic effect of boron nitride (BN) and carbon domains comes up with the modifications of the charge polarization of single-TM-atom active site and the electronic properties of material, which has been proven to be the essential key to promote N₂ adsorption, activation, and reduction. Specifically, six SACs (namely V, Mn, Fe, Mo, Ru, and W atoms embedded into defective BCNTs) can be used as promising candidates for NRR electrocatalysts as their NRR activity is higher than the state-of-the art Ru(0001) catalyst. In particular, single Mo atom supported on defective BCNTs with large tube diameter possesses the highest NRR activity while suppressing the competitive hydrogen evolution reaction, with a low limiting potential of -0.62 V via associative distal path. This work suggests new opportunities for driving NH₃ production by carbon-based single-atom electrocatalysts under ambient conditions.

Boron-Induced Nitrogen Fixation in 3D Carbon Materials for Supercapacitors

Nitrogen-rich carbon materials attract great attention because of their admirable performance in energy storage and electrocatalysis. However, their conductivity and nitrogen content are somehow contradictory because good conductivity requires high-temperature heat treatment, which decomposes most of the nitrogen species. Herein, we propose a facile method to solve this problem by introducing boron (B) to fix the nitrogen in a three-dimensional (3D) carbon material even at 1000 °C. Besides, this N-rich carbon material has a high content of pyrrolic nitrogen due to the selective stabilization of B, which is favorable in electrochemical reactions. Density functional theory (DFT) investigation demonstrates that B reduces the energy level of neighboring N species (especially pyrrolic nitrogen) in the graphene layer, making it difficult to escape. Thus, this carbon material simultaneously, achieves high conductivity (30 S cm^-1) and nitrogen content (7.80 atom %), thus showing an outstanding capacitance of 412 F g^-1 and excellent rate capability.

Deformable BCN/Fe3O4/PCL composites through electromagnetic wave remote control

Electromagnetic wave (EMW) induction of shape memory polymer (SMP) composites with multifunctional inorganic fillers is a high efficiency, uniform, and non-contact method. Herein, the shape memory effect of ternary BCN/Fe₃O₄/PCL composites induced by EMWs are explored. The components of Fe₃O₄ and the BCN nanotubes serve as wave-absorbing materials. The electromagnetic properties and EMW absorption performance of BCN/Fe₃O₄/PCL are discussed in detail. The EMWs absorbed by BCN/Fe₃O₄/PCL are dissipated by dielectric loss and magnetic loss. The shape memory mechanism of BCN/Fe₃O₄/PCL is based on the Fe₃O₄ and BCN nanotubes dissipating absorbed EMW energy into heat to boost the temperature of the composites, thereby responding to EMW remote control. This work introduces a new direction for SMPs induced by EMWs as potential candidates in the application of shape recovery in a restricted space.

Metal-free photocatalysts for hydrogen evolution

This article provides a comprehensive review of the latest progress, challenges and recommended future research related to metal-free photocatalysts for hydrogen productionviawater-splitting.

Cyanate ester composites containing surface functionalized BN particles with grafted hyperpolyarylamide exhibiting desirable thermal conductivities and a low dielectric constant

Surface functionalized BN particles with grafted hyperbranched polyarylamide (BN-HBP) were prepared and used to improve the thermal conductivity and low dielectric constant of BN-filled cyanate ester resin (BN-HBP/CE) composites. The thermal stability, dielectric properties, thermal conductivity and dynamic mechanical properties of the BN-HBP/CE composites were investigated. The results illustrate that BN-HBP/CE composites with a load of 32 wt% exhibit a high glass transition temperature of 283 °C, low dielectric constant of 3.29 at 1 MHz, and a desirable thermal conductivity of 0.97 W/(m·K). Additionally, these novel materials exhibit a high decomposition temperature of 5% weight loss at 407 °C and low curing shrinkage of −0.64%. When the loading is 38 wt%, the thermal conductivity of BN-HBP/CE composites is 1.27 W/(m·K). These findings have significant implications for the preparation of high-performance substrates that meet the requirements for application as printed circuit board substrates.

This graphic show the process of surface functionalization of BN and thermal conductivity of BN-HBP/CE composites with various ratios.

Facile synthesis of boronic acid-decorated carbon nanodots as optical nanoprobes for glycoprotein sensing

In this article, we proposed new nitrogen-doped boronic acid-decorated carbon nanodots (CNDs) for the recognition and detection of glycoproteins. These doped, decorated CNDs were obtained by a one-step hydrothermal carbonization method using phenylboronic acid and ethylenediamine as precursors. Compared to traditional synthesized and then functionalized nanoscale sensing systems, this method is more facile and efficient. The as-prepared nitrogen-doped CNDs possessed a quasi-spherical morphology and a high quantum yield of approximately 14.5%. The added glycoproteins (taking horseradish peroxidase as a model protein) can selectively induce the assembly and fluorescence quenching of CNDs through the formation of cyclic boronate esters, because the boronic acid groups on the CND surfaces can covalently interact with cis-diol-containing glycoproteins. These fluorescence responses can be used to properly quantify horseradish peroxidase in the range of 3.3-333.3 μg mL-1 with a detection limit of 0.52 μg mL-1, and the selectivity assay with functionalized CNDs was further investigated using various proteins with different quantities of glycosylation sites as well as using smaller molecules. The results show that the nanosensing system possesses favorable selectivity. Due to its simplicity and effectiveness, the system has great application prospects as a practical platform for glycoprotein sensing.

Self-Ordered Orientation of Crystalline Hexagonal Boron Nitride Nanodomains Embedded in Boron Carbonitride Films for Band Gap Engineering

Boron carbonitride (BCN) films containing hybridized bonds involving elements B, C, and N over wide compositional ranges enable an abundant variety of new materials, electronic structures, properties, and applications, owing to their semiconducting properties with variable band gaps. However, it still remains challenging to achieve band gap-engineered BCN ternary with a controllable composition and well-established ordered structure. Herein, we report on the synthesis and characterization of hybridized BCN materials, consisting of self-ordered hexagonal BN (h-BN) crystalline nanodomains, with its aligned basal planes preferentially perpendicular to the substrate, depending on the growth conditions. The observation of the two sets of different band absorptions suggests that the h-BN nanodomains are distinguished enough to resume their individual band gap identity from the BCN films, which decreases as the carbon content increases in the BCN matrix, due to the doping and/or boundary effect. Our results reveal that the structural features and band gap of this form of hybrid BCN films are strongly correlated with the kinetic growth factors, making it a great system for further fundamental physical research and for potential in the development of band gap-engineered applications in optoelectronics.

Synthesis of Porous Boron-Doped Carbon Nitride: Adsorption Capacity and Photo-Regeneration Properties

Carbon nitride (CN) with improved adsorption⁻degradation capacity was synthesized using B₂O₃ and CN via calcination. The pollutant removal capacity of this B₂O₃/CN (B-CN) was studied by a powder suspension experiment and added into concrete to evaluate the adsorption and degradation of methylene blue (MB). The characterizations of all samples indicate that B₂O₃ significantly affects CN, e.g., by increasing the CN specific surface area to 3.6 times the original value, extending visible light adsorption, and narrowing the band gap from 2.56 eV to 2.42 eV. Furthermore, the results show that B-CN composite materials have a higher MB-removal efficiency, with the adsorption capacity reaching 43.11 mg/g, which is about 3.3 times that of pristine CN. The MB adsorption process on B2-CN is mainly via electrostatic attraction and π⁻π interactions. In addition, B-CN added into concrete also has good performance. After five adsorption⁻degradation cycles, B-CN and photocatalytic concrete still exhibit a good regenerate ability and excellent stability, which are very important for practical applications.

Structure-Mediated Charge Separation in Boron Carbon Nitride for Enhanced Photocatalytic Oxidation of Alcohol

Boron carbon nitride (BCN) is a promising earth-abundant photocatalyst for solar energy conversion. However, the photocatalytic activities of BCN materials remain moderate because of the fast electron-hole recombination. Herein, an ordered BCN structure is fabricated by a facile one-step thermal treatment strategy. The ordered structure of BCN is directly evident from powder X-ray diffraction and high-resolution transmission electron microscopy. Importantly, it is found that the long-period ordered structure can intrinsically accelerate the separation and transfer kinetics of photogenerated charge carriers. Benefiting from these advantages, the ordered BCN structure exhibits remarkable performance for photoinduced selective oxidation of benzyl alcohol compared with the pristine BCN counterpart. This work highlights the important role of the crystal structure of light-harvesting materials in affecting electron-hole separation and at the same time points to the ample potential for improving the photocatalytic performance.

B, N Codoped and Defect-Rich Nanocarbon Material as a Metal-Free Bifunctional Electrocatalyst for Oxygen Reduction and Evolution Reactions

The development of highly active, inexpensive, and stable bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts to replace noble metal Pt and RuO2 catalysts remains a considerable challenge for highly demanded reversible fuel cells and metal-air batteries. Here, a simple approach for the facile construction of a defective nanocarbon material is reported with B and N dopants (B,N-carbon) as a superior bifunctional metal-free catalyst for both ORR and OER. The catalyst is prepared by pyrolyzing the composites of ethyl cellulose and high-boiling point 4-(1-naphthyl)benzeneboronic acid in NH3 atmosphere with an inexpensive Zn-based template. The obtained porous B,N-carbon with rich carbon defects exhibits excellent ORR and OER performances, including high activity and stability. In alkaline medium, B,N-carbon material shows high ORR activity with an onset potential (Eonset) reaching 0.98 V versus reversible hydrogen electrode (RHE), very close to that of Pt/C, a high electron transfer number and excellent stability. This catalyst also presents the admirable ORR activity in acidic medium with a high Eonset of 0.81 V versus RHE and a four-electron process. The OER activity of B,N-carbon is superior to that of the precious metal RuO2 and Pt/C catalysts. A Zn-air battery using B,N-carbon as the air cathode exhibits a low voltage gap between charge and discharge and long-term stability. The excellent electrocatalytic performance of this porous nanocarbon material is attributed to the combined positive effects of the abundant carbon defects and the heteroatom codopants.

Phosphor-doped hexagonal boron nitride nanosheets as effective acid–base bifunctional catalysts for one-pot deacetalization–Knoevenagel cascade reactions

Phosphor doping creates well-defined Brønsted acid and base sites on h-BN nanosheets, ensuring the smooth proceeding of deacetalization–Knoevenagel cascade reaction.

C-doping into h-BN at low annealing temperature by alkaline earth metal borate for photoredox activity

BCN (boron carbon nitride) nanosheets are promising photocatalyst materials for solar fuel production by visible light-driven water splitting and CO₂ reduction due to their tunable band gap and unique properties. C-doping into h-BN by thermal annealing makes possible the preparation of BCN nanosheets with photocatalytic activity under visible light irradiation, but it generally requires a very high temperature (>1250 °C) from the thermodynamic viewpoint. Here, we report a new method to prepare BCN nanosheets with visible light-photocatalytic activity at lower annealing temperature (1000 °C) than equilibrium by adding alkaline earth metal compounds. BCN nanosheets formed in borate melt show a clear layered structure, tunable bandgap and photocatalytic activity for water splitting and CO₂ reduction under visible light illumination. This provides a direction for doping other elements into h-BN at low annealing temperature by alkaline earth metal borates.

The alkaline earth metal borates promote the formation of C-doped h-BN nanosheets at low annealing temperature towards robust photocatalytic activity.

Metal-free Ternary BCN Nanosheets with Synergetic Effect of Band Gap Engineering and Magnetic Properties

Introducing the synergy effect of magnetic properties and band gap engineering is highly desired for two-dimensional (2D) nanosheets. Here, we prepare metal-free ternary 2D carbon (C) doped boron nitride (BN) nanosheets (BCN) with band gap engineering and magnetic properties by a synergetic way. The substitutional occupation of C atoms, as revealed by X-ray absorption spectrum, in BCN nanosheets induces tunable band gap reduction (5.5 eV to 2.6 eV) and intensive intrinsic ferromagnetism at room temperature. First-principle calculations also reveal that substituted C atoms in BCN nanosheets can broaden the light adsorption region and reduce the optical band gap, and ferromagnetic ordering is energetically more favorable than antiferromagnetic. This design opens up new possibility for synergetic manipulation of exchange interactions and band gap engineering in 2D nanostructures.

Facile Fabrication of BCN Nanosheet-Encapsulated Nano-Iron as Highly Stable Fischer-Tropsch Synthesis Catalyst

The few layered boron carbon nitride nanosheets (BCNNSs) have attracted widespread attention in the field of heterogeneous catalysis. Herein, we report an innovative one-pot route to prepare the catalyst of BCNNSs-encapsulated sub-10 nm highly dispersed nanoiron particles. Then the novel catalyst was used in Fischer-Tropsch synthesis for the first time and it exhibited high activity and superior stability. At a high temperature of 320 °C, CO conversion could reach 88.9%, corresponding catalytic activity per gram of iron (iron time yield, FTY) of 0.9 × 10^-4 mol_CO g_Fe^-1 s^-1, more than 200 times higher than that of pure iron. Notably, no obvious deactivation was observed after 1000 h running. The enhanced stability of the catalyst can be ascribed to the special encapsulated structure. Furthermore, the formation mechanism of highly dispersed iron nanoparticle also was elaborated. This approach opens the way to designing metal nanoparticles with both high stability and reactivity for nanocatalysts in hydrogenation application.

Solution plasma synthesis of a boron–carbon–nitrogen catalyst with a controllable bond structure

Synthesis of boron–carbon–nitrogen (BCN) nanocarbon with a controllable bond structure for enhanced oxygen reduction reaction (ORR) activity and durability was performed using a new method of discharge in organic solution mixtures named the ‘Solution Plasma Process’.

Bio-templated fabrication of metal-free boron carbonitride tubes for visible light photocatalysis

A novel and facile biotemplating method has been presented to synthesize boron carbon nitride tubes (BCNTs) by using the low-cost kapok fibers (KFs). This pathway not only transplanted the structure of KFs into the h-BN lattice, but also introduced C simultaneously in a self-doping manner. The BCNT photocatalysts can catalyse hydrogen evolution from water under visible light illumination.

Composition-controlled synthesis and tunable optical properties of ternary boron carbonitride nanotubes

Ternary boron nitride nanotubes (BCNNTs) with controllable compositions and tunable optical band gaps have been successfully achieved.

Hydrogenation of nitroarenes into aromatic amines over Ag@BCN colloidal catalysts

The present work reports that two-dimension layered ternary boron carbon nitrogen nanosheets can serve as good carriers to support and disperse noble metal nanoparticles. The Ag@BCN colloids have thus been prepared by attaching Ag nanoparticles on the surfaces of BCN nanosheets. The detailed structures of the Ag@BCN samples were investigated by X-ray diffraction, transmission electron microscopy, atomic force microscope, infrared, and X-ray photoelectron spectroscopy. It is found that the surface NH groups of BCN nanosheets are beneficial for the attachment of Ag nanopaprticles. Compared with the conventional organic capping compounds, the two dimensional planar BCN nanosheets endow the attached nanoparticle with the high active surfaces. Moreover, the hydrogenation of nitroarenes into the corresponding aromatic amines can be highly achieved over Ag@BCN colloids by NaBH4. In particular, the apparent activation energy of the conversion reaction of p-nitroaniline to p-phenylenediamine was found to be 76.0kJ/mol over the Ag@BCN colloids with 3wt% Ag content. Our results may provide a new approach for the design noble metal based composites and find the practical application for the hydrogenation of nitroarenes.

Pyrrole-Terminated Ionic Liquid Surfactant: One Molecule with Multiple Functions for Controlled Synthesis of Diverse Multispecies Co-Doped Porous Hollow Carbon Spheres

Rationally and efficiently controlling chemical composition, microstructure, and morphology of carbon nanomaterials plays a crucial role in significantly enhancing their functional properties and expending their applications. In this work, a novel strategy for simultaneously controlling these structural parameters was developed on the base of a multifunctional precursor approach, in which the precursor not only serves as carbon source and structure-directing agent, but also contains two heteroatom doping sites. As exemplified by using pyrrole-terminated ionic liquid surfactant as such precursor, in conjunction with sol-gel chemistry this strategy allows for efficiently producing well-defined hollow carbon spheres with controlled microstructure and chemical compositions. Remarkably, the dual-doping sites in confined silica channels provide an exciting opportunity and flexibility to access various doped carbons through simply anion exchange or altering the used oxidative polymerization agent, especially the multispecies codoped materials by combination of the two doping modes. All the results indicate that the described strategy may open up a new avenue for efficiently synthesizing functional carbon materials with highly controllable capability.

Self-organized graphene-like boron nitride containing nanoflakes on copper by low-temperature N2 + H2 plasma

A simple and efficient method for synthesizing complex graphene-inspired BNCO nanoflakes by plasma-enhanced hot filament chemical vapour deposition using B₄C as a precursor and N₂/H₂ reactive gases is reported.

Carbon-doped BN nanosheets for metal-free photoredox catalysis

The generation of sustainable and stable semiconductors for solar energy conversion by photoredox catalysis, for example, light-induced water splitting and carbon dioxide reduction, is a key challenge of modern materials chemistry. Here we present a simple synthesis of a ternary semiconductor, boron carbon nitride, and show that it can catalyse hydrogen or oxygen evolution from water as well as carbon dioxide reduction under visible light illumination. The ternary B–C–N alloy features a delocalized two-dimensional electron system with sp² carbon incorporated in the h-BN lattice where the bandgap can be adjusted by the amount of incorporated carbon to produce unique functions. Such sustainable photocatalysts made of lightweight elements facilitate the innovative construction of photoredox cascades to utilize solar energy for chemical conversion.

Metal-free semiconductors with appropriate bandgaps create photocatalytic routes to water splitting and CO₂ reduction. Here the authors dope hexagonal boron nitride nanosheets with carbon via a simple method to synthesize a ternary B–C–N alloy capable of performing just this function.

Half-metallicity modulation of hybrid BN-C nanotubes by external electric fields: a first-principles study

On the basis of density functional theory, we systematically investigate the electronic and magnetic properties of hybrid BN-C nanotubes, Cx(BN)y where x + y = 12, with and without an external electric field. The BN-C nanotubes are totally distinct from pristine boron-nitride and carbon nanotubes. The electronic properties of Cx(BN)y change significantly with composition: from the nonmagnetic semiconductors to the half-metals. The half-metallicity is attributed to the competition among the band gap, which is related to the width of C domain, the width of BN domain, and the intrinsic polarization field. Application of the external fields can enhance or counterbalance the polarization fields and change the band gaps. The half-metallicity can be modulated. In BN-rich tubes, such as C2(BN)10, the energy gap can be engineered from 0.50 eV to 0.95 eV and in C3(BN)9, the ground state is converted from the nonmagnetic state into the anti-ferro-magnetic one. In other tubes, the half-metallicity can be enhanced or destroyed by different external fields. The modulation indicates that hybrid BN-C nanotubes can work as the components of the spin-filter devices.