Diffusion-Based Deprotection in Mesoporous Materials: A Strategy for Differential Functionalization of Porous Silica Particles

Factors affecting mixed-mode retention properties of cation-exchange stationary phases

Cation-exchange stationary phases were characterized in different chromatographic modes (HILIC, RPLC, IC) and applied to the separation of non-charged hydrophobic and hydrophilic analytes. The set of columns under investigation included both commercially available cation-exchangers and self-prepared PS/DVB-based columns, the latter consisting of adjustable amounts of carboxylic and sulfonic acid functional groups. The influence of cation-exchange site and polymer substrate on the multimodal properties of cation-exchangers was identified using selectivity parameters, polymer imaging and excess adsorption isotherms. Introducing weakly acidic cation-exchange functional groups to the unmodified PS/DVB-substrate effectively reduced hydrophobic interactions, whilst a low degree of sulfonation (0.09 to 0.27% w/w sulphur) mainly influenced electrostatic interactions. Silica substrate was found to be another important factor for inducing hydrophilic interactions. The presented results demonstrate that cation-exchange resins are suitable for mixed-mode applications and offer versatile selectivity.

Fenton Stability of Mesoporous Ceria-Silica and Its Role in Enhanced Durability of Poly(arylene ether sulfone) Multiblock Copolymer Composite Membranes for Perfluorosulfonic Acid Alternatives

To increase the stability of cerium scavengers, we doped cerium oxide on mesoporous silica powders for the application of an oxidative stabilizer. The oxidation-reduction reaction involving hydroxyl radicals (•OH) is investigated with Fenton's test using eight types of Ce(IV)-mobile compositions of matter 41 (MCM-41) and Ce(III)-MCM-41 powder samples. As confirmed by X-ray photoelectron spectroscopy, the relative amount of Ce3+ inside the mesoporous samples decreases with the increasing time of treatment using the Fenton solution, whereas that of Ce4+ increases. 29Si CP-MAS NMR shows that the condensation of the siloxane bond varies according to the treating time up to 120 h. The mesoporous structure is also analyzed using synchrotron small-angle X-ray scattering and nitrogen adsorption. Further treatment with propane sulfonic acid ensured that the ionic conductivity of the sulfonated mesoporous silica did not decrease. The surface-modified mesoporous silica was incorporated in sulfonated poly(arylene ether sulfone) multiblock membranes. The sulfonated mesoporous silica could overcome the drawbacks of transition metal scavengers, such as a drop in ionic conductivity. Through experiments, we determined that the Ce-doped sulfonated mesoporous silica/sulfonated poly(arylene ether sulfone) composite membranes exhibit high oxidation stability when exposed to hydrogen peroxide and even higher proton conductivity than Nafion at a relative humidity over 60%.

Recent Trends in Morphology-Controlled Synthesis and Application of Mesoporous Silica Nanoparticles

The outstanding journey towards the investigation of mesoporous materials commences with the discovery of high surface area porous silica materials, named MCM-41 (Mobil Composition of Matter-41) according to the inventors' name Mobile scientists in the United States. Based on a self-assembled supramolecular templating mechanism, the synthesis of mesoporous silica has extended to wide varieties of silica categories along with versatile applications of all these types in many fields. These silica families have some extraordinary structural features, like highly tunable nanoscale sized pore diameter, good Brunauer-Emmett-Teller (BET) surface areas, good flexibility to accommodate different organic and inorganic functional groups, metals etc., onto their surface. As a consequence, thousands of scientists and researchers throughout the world have reported numerous silica materials in the form of published articles, communication, reviews, etc. Beside this, attention is also given to the morphology-oriented synthesis of silica nanoparticles and their significant effects on the emerging fields of study like catalysis, energy applications, sensing, environmental, and biomedical research. This review highlights a consolidated overview of those morphology-based mesoporous silica particles, emphasizing their syntheses and potential role in many promising fields of research.

Mesoporous Silica Nanoparticles in Bioimaging

A biomedical contrast agent serves to enhance the visualisation of a specific (potentially targeted) physiological region. In recent years, mesoporous silica nanoparticles (MSNs) have developed as a flexible imaging platform of tuneable size/morphology, abundant surface chemistry, biocompatibility and otherwise useful physiochemical properties. This review discusses MSN structural types and synthetic strategies, as well as methods for surface functionalisation. Recent applications in biomedical imaging are then discussed, with a specific emphasis on magnetic resonance and optical modes together with utility in multimodal imaging.

Quantification of amino groups on halloysite surfaces using the Fmoc-method

The functionalization of halloysite nanotube (HNT) surfaces with aminosilanes is an important strategy for their further decoration with organic molecules to obtain hybrid inorganic–organic nanoarchitectures to be used in catalysis and drug delivery. The exact quantification of amino groups on the surface is an important aspect in view of the obtainment of systems with a known number of loaded molecules. In the present study, we describe a simple and reliable method for the correct quantification of groups present on HNT surfaces after their reaction with aminopropyltriethoxysilane (APTES). This method, applied for the first time to HNT chemistry, was based on the use of Fmoc groups as probes covalently bound to APTES and quantified by UV-Vis after release from the HNT–APTES–Fmoc system. Interestingly, this method showed great accordance with the already employed quantitative thermogravimetric analysis (TGA), with some benefits such as simple and non-destructive procedure, besides the possibility to monitor the deprotection reaction.

The functionalization of halloysite nanotube (HNT) surfaces with aminosilanes is an important strategy for their further decoration with organic molecules to obtain hybrid inorganic–organic nanoarchitectures to be used in catalysis and drug delivery.

Intelligent gold nanostars for in vivo CT imaging and catalase-enhanced synergistic photodynamic & photothermal tumor therapy

Photodynamic therapy (PDT) is a clinically approved and minimally invasive form of cancer treatment. However, due to hypoxia at the tumor site and phototoxicity to normal tissues, monotherapies using photosensitizers remain suboptimal. This study aimed to develop a highly selective controlled catalase-enhanced synergistic photodynamic and photothermal cancer therapy based on gold nanostars.

Methods: Gold nanostars (GNS) with high thermal conversion efficiency were used as the core for photothermal therapy (PTT) and the shell consisted of the photosensitizer Ce6-loaded mesoporous silicon. The shell was modified with catalase (E), which catalyzes the conversion of hydrogen peroxide to oxygen at the tumor site, alleviating hypoxia and increasing the effect of the photodynamic treatment. Finally, a phospholipid derivative with c(RGDyK) was used as the targeting moiety and the nanoparticle-encapsulating material.

Results: The nanoprobe exhibited good dispersion, high stability, and high photothermal conversion efficiency (~28%) for PTT as well as a photodynamic "on-off" effect on Ce6 encapsulated in mesoporous channels. The "release" of Ce6 was only triggered under photothermal stimulation in vivo. Due to its targeting ability, 72 h after injection of the probe, the tumor site in mice showed an observable CT response. The combined treatment using photothermal therapy (PTT) and catalase-enhanced photo-controlled PDT exerted a superior effect to PTT or PDT monotherapies.

Conclusion: Our findings demonstrate that the use of this intelligent nanoprobe for CT-targeted image-guided treatment of tumors with integrated photothermal therapy (PTT) and catalase-enhanced controlled photodynamic therapy (PDT) may provide a novel approach for cancer theranostics.

A Toolbox for the Synthesis of Multifunctionalized Mesoporous Silica Nanoparticles for Biomedical Applications

Mesoporous silica nanoparticles (MSNs) are considered as promising next-generation nanocarriers for health-related applications. However, their effectiveness mostly relies on their efficient and surface-specific functionalization. In this contribution, we explored different strategies for the rational multistep synthesis of functional MCM-48-type MSNs with selectively created active inner and/or external surfaces. Functional groups were first installed using a combination of (delayed) co-condensation and post-grafting procedures. Both amine [(3-aminopropyl)triethoxysilane (APTS)] and thiol [(3-mercaptopropyl)trimethoxysilane (MPTS)] silanes were used, in various addition sequences. Following this, the different platforms were further functionalized with polyethylene glycol and/or with a pro-chelate ligand used as a magnetic resonance imaging contrast agent (diethylenetriaminepentaacetic acid chelates) and/or loaded with quercetin and/or grafted with an organic dye (rhodamine). The efficiency of the multiple grafting strategies and the effects on the MSN carrier properties are presented. Finally, the colloidal stability of the different systems was evaluated in physiological media, and preliminary tests were performed to verify their drug release capability. The use of MPTS appeared beneficial when compared to APTS in delayed co-condensation procedures to preserve both selective distribution of the functional groups, reactive functionality, and pore ordering. Our results provide in-depth insights into the efficient design of (multi)functional MSNs and especially on the crucial role played by the sequence of step-by-step functionalization methods aiming to produce multipurpose and stable bioplatforms.

Loading of polymyxin B onto anionic mesoporous silica nanoparticles retains antibacterial activity and enhances biocompatibility

Polymyxin B is a polycationic antibiotic used as the last line treatment against antibiotic-resistant Gram negative bacteria. However, application of polymyxin B is limited because of its toxicity effects. Herein, we used bare and surface modified mesoporous silica nanoparticles (MSNs) with an average diameter of 72.29 ± 8.17 nm as adsorbent for polymyxin B to improve its therapeutic properties. The polymyxin B adsorption onto MSN surfaces was explained as a function of pH, type of buffer and surface charge of nanoparticles, according to the ζ-potential of silica nanoparticles and adsorption kinetics results. The highest value of the adsorption capacity (about 401 ± 15.38 mg polymyxin B/ g silica nanoparticles) was obtained for the bare nanoparticles in Tris buffer, pH 9. Release profiles of polymyxin B showed a sustained release pattern, fitting Power law and Hill models. The antibiotic molecules-loaded nanoparticles showed enhanced antibacterial activity compared to free antibiotic against different Gram negative bacteria. Biocompatibility evaluation results revealed that loading of polymyxin B onto MSNs can decrease the cytotoxicity effects of the drug by reducing ROS generation. Our results suggest that formulation of drugs by adsorption onto MSNs may offer a way forward to overcome the adverse effects of some antibiotics such as polymyxin B without compromising their antimicrobial properties.

Progress in Nanotheranostics Based on Mesoporous Silica Nanomaterial Platforms

Theranostics based on nanoparticles (NPs) is a promising paradigm in nanomedicine. Mesoporous silica nanoparticle (MSN)-based systems offer unique characteristics to enable multimodal imaging or simultaneous diagnosis and therapy. They include large surface area and volume, tunable pore size, functionalizable surface, and acceptable biological safety. Hybridization with other NPs and chemical modification can further potentiate the multifunctionality of MSN-based systems toward translation. Here, we update the recent progress on MSN-based systems for theranostic purposes. We discuss various synthetic approaches used to construct the theranostic platforms either via intrinsic chemistry or extrinsic combination. These include defect generation in the silica structure, encapsulation of diagnostic NPs within silica, their assembly on the silica surface, and direct conjugation of dye chemicals. Collectively, in vitro and in vivo results demonstrate that multimodal imaging capacities can be integrated with the therapeutic functions of these MSN systems for therapy. With further improvement in bioimaging sensitivity and targeting specificity, the multifunctional MSN-based theranostic systems will find many clinical applications in the near future.

Functionalized Mesoporous Silica via an Aminosilane Surfactant Ion Exchange Reaction: Controlled Scaffold Design and Nitric Oxide Release

Nitric oxide-releasing mesoporous silica nanoparticles (MSNs) were prepared using an aminosilane-template surfactant ion exchange reaction. Initially, bare silica particles were synthesized under basic conditions in the presence of cetyltrimethylammonium bromide (CTAB). These particles were functionalized with nitric oxide (NO) donor precursors (i.e., secondary amines) via the addition of aminosilane directly to the particle sol and a commensurate ion exchange reaction between the cationic aminosilanes and CTAB. N-Diazeniumdiolate NO donors were formed at the secondary amines to yield NO-releasing MSNs. Tuning of the ion exchange-based MSN modification approach allowed for the preparation of monodisperse particles ranging from 30 to 1100 nm. Regardless of size, the MSNs stored appreciable levels of NO (0.4-1.5 μmol mg(-1)) with tunable NO release durations (1-33 h) dependent on the aminosilane modification. Independent control of NO release properties and particle size was achieved, demonstrating the flexibility of this novel MSN synthesis over conventional co-condensation and surface grafting strategies.

Functionalization of arrays of silica nanochannels by post-condensation

Functionalized arrays of silica nanochannels (ASNCs) were prepared by post-condensation. This synthetic approach allows control of the functional group distribution in a one-pot reaction, while preserving the defined nanoporous structure of the ASNCs.

Synthesis of mesoporous materials as nano-carriers for an antimalarial drug

An antimalarial drug artesunate (ATS) was encapsulated in both functionalized MCM-41 and ordinary MCM-41 with an excellent loading capacity and sustained release behavior for possible biomedical applications.

Bifunctionalized mesoporous silica-supported gold nanoparticles: intrinsic oxidase and peroxidase catalytic activities for antibacterial applications

Bifunctionalized mesoporous silica-supported gold nanoparticles as oxidase and peroxidase mimics for antibacterial applications are demonstrated. For the first time, these mesoporous silica-supported gold nanoparticles are applied as oxidase and peroxidase mimics. Taking advantage of their prominent enzyme activities, the MSN-AuNPs show excellent antibacterial properties against both Gram-negative and Gram-positive bacteria. Furthermore, MSN-AuNPs also exhibit outstanding performance in biofilm elimination .

Use of two-step grafting to fabricate dual-functional films and site-specific functionalized scaffolds

Polycaprolactone (PCL) is a widely utilized bioresorbable polymer in tissue engineering applications. However, the absence of intrinsic functional groups in the polymer backbone necessitates the incorporation of functional chemistries to enable the further addition of bioactive molecules to PCL-based surfaces and scaffolds. The current study aimed to incorporate two different functional groups, amine and carboxylate, first on two-dimensional (2D) spin-coated PCL films and, thereafter, throughout all surfaces within three-dimensional (3D) porous PCL-based scaffolds, produced using the thermally induced phase separation (TIPS) method, but in a spatially separated manner. Specifically, gamma irradiation induced grafting of acrylic acid (AA) and 2-aminoethyl methacrylate hydrochloride (AEMA) onto PCL was performed in selected solvents and the resulting substrates were characterized using X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and contact angle measurements to determine the surface free energy. Results demonstrated that stepwise graft copolymerization of AEMA and AA allows the fabrication of dual-functional surfaces, with chemistry depending on the order of grafting of the two monomers. In addition, 3D scaffolds could be decorated exclusively with carboxylate groups in the interior, while the outer surface displayed dual-functionality. This simple surface modification methodology, with the ability to create spatially separated surface functional groups throughout 3D porous scaffolds post their fabrication, has the potential to be applied to many current and future scaffold systems being investigated in the field of tissue engineering.

Bimodal mesoporous silica with bottleneck pores

Partial pseudomorphic transformation of SBA-15 yields bimodal mesoporous silica with defined bottlenecks that restrict the access to the core of the particles.

The effect of mesoporous silica nanoparticle surface chemistry and concentration on the α-synuclein fibrillation

Surface chemistry/charge and concentration of mesoporous silica nanoparticles have a great impact on the fibrillation process of α-Syn protein.

Mesostructure-tunable and size-controllable hierarchical porous silica nanospheres synthesized by aldehyde-modified Stöber method

Mesostructure-fine-tuned and size-controlled hierarchical porous silica nanospheres were synthesized by aldehyde-modified Stöber method in the TEOS–CTAB–NH₃·H₂O–aldehyde system.

Adsorption and release of siRNA from porous silica

Porous silica particles are potential transfection agents for nucleic acid-based therapies because of their large specific surface areas and pore volumes and the ease with which they can be chemically modified to maximize the loading of cargo and to effect targeting in vivo. Here, we present a systematic study of the effects of pore size and pore modification on the adsorption and release of short, interfering RNA (siRNA) from a mesoporous silica particle developed in our laboratory. Using adsorption isotherms and release experiments, we found that the short polyamine diethylenetriamine was the best chemical modification for achieving both the adsorption and release of large amounts of siRNA. The degree of functionalization with diethylenetriamine caused drastic changes in the loading capacity and binding strength of siRNA to silica with relatively large pores (8 nm and larger), but the degree of functionalization had a weaker effect in narrow pores (4 nm). Multilayer adsorption could occur in materials with large pores (15 nm). Release experiments showed that intermediate pore sizes and intermediate degrees of functionalization resulted in the best compromise between maximizing loading (from strong adsorption) and maximizing release. Capillary electrophoresis and quantitative, real-time PCR demonstrated that siRNA was released intact and that these particles functioned as a transfection agent of mammalian cells in vitro.

Bolaform surfactants with polyoxometalate head groups and their assembly into ultra-small monolayer membrane vesicles

Surfactants are indispensable in established technologies as detergents or emulsification agents, and also in recent studies for controlling the growth of nanoparticles or for creating nanocarriers. Although the properties of conventional, organic surfactants are thoroughly explored, strong interest persists in surfactants that possess unique features inaccessible for ordinary systems. Here we present dipolar, bolaform surfactants with a head group comprising of 11 tungsten atoms. These novel compounds are characterized by an exceptionally low critical self-organization concentration, which leads to monolayer vesicles with a diameter of only 15 nm, that is, substantially smaller than for any other system. The membrane of the vesicles is impermeable for water-soluble and oil-soluble guests. Control over release kinetics, which can be followed via the quantitative fluorescence quenching of confined fluorophores, is gained by means of pH adjustments.

Selective functionalization of the internal and the external surfaces of mesoporous silicon by liquid masking

A general approach for selective, differential functionalization of the interior and exterior surfaces of mesoporous Si is reported. The method employs two immiscible liquids, one inert and the other chemically reactive with the porous Si nanostructure. First, a porous Si sample is prepared by electrochemical etch and then it is mildly oxidized, which places a thin layer of silicon oxide at the surface. The inner pore walls of the partially oxidized porous Si film are then infiltrated with an inert liquid (octane). The sample is then immersed in aqueous solution containing hydrogen fluoride (HF), which serves as the reactive liquid. The hydrophobic phase is retained in the interior of the porous nanostructure, and HF(aq) attacks only the exposed surfaces of the oxidized porous Si sample, generating a hydrophobic, hydrogen-terminated (Si-H) outer layer. The reaction is self-limiting due to the immiscibility of octane and water, and the extent of penetration of the Si-H surface into the porous layer is dependent on the time of exposure to HF(aq). The Si-H surface can then be modified by thermal hydrosilylation (1-dodecene or 10-bromo-1-decene) in a subsequent step, resulting in a bifunctional porous Si film containing hydrophobic pore entrances to hydrophilic inner pores. The hydrophobic dodecyl species at the mouths of the pores is found to form a barrier for molecular transport; it decreases the rate of leaching (into water) of a rhodamine test molecule that is preloaded into the sample by >8 fold.

Mesoporous systems for poorly soluble drugs

Utilization of inorganic mesoporous materials in formulations of poorly water-soluble drugs to enhance their dissolution and permeation behavior is a rapidly growing area in pharmaceutical materials research. The benefits of mesoporous materials in drug delivery applications stem from their large surface area and pore volume. These properties enable the materials to accommodate large amounts of payload molecules, protect them from premature degradation, and promote controlled and fast release. As carriers with various morphologies and chemical surface properties can be produced, these materials may even promote adsorption from the gastrointestinal tract to the systemic circulation. The main concern regarding their clinical applications is still the safety aspect even though most of them have been reported to be safely excreted, and a rather extensive toxicity screening has already been conducted with the most frequently studied mesoporous materials. In addition, the production of the materials on a large scale and at a reasonable cost may be a challenge when considering the utilization of the materials in industrial processes. However, if mesoporous materials could be employed in the industrial crystallization processes to produce hybrid materials with poorly soluble compounds, and hence to enhance their oral bioavailability, this might open new avenues for the pharmaceutical industry to employ nanotechnology in their processes.

Formation of a long-lived electron-transfer state in mesoporous silica-alumina composites enhances photocatalytic oxygenation reactivity

A simple donor-acceptor linked dyad, 9-mesityl-10-methylacridinium ion (Acr(+)-Mes) was incorporated into nanosized mesoporous silica-alumina to form a composite, which in acetonitrile is highly dispersed. In this medium, upon visible light irradiation, the formation of an extremely long-lived electron-transfer state (Acr(•)-Mes(•+)) was confirmed by EPR and laser flash photolysis spectroscopic methods. The composite of Acr(+)-Mes-incorporated mesoporous silica-alumina with an added copper complex [(tmpa)Cu(II)] (ClO(4)(-))2 (tmpa = tris(2-pyridylmethyl)amine) acts as an efficient and robust photocatalyst for the selective oxygenation of p-xylene by molecular oxygen to produce p-tolualdehyde and hydrogen peroxide. Thus, incorporation of Acr(+)-Mes into nanosized mesoporous silica-alumina combined with an O(2)-reduction catalyst ([(tmpa)Cu(II)](2+)) provides a promising method in the development of efficient and robust organic photocatalysts for substrate oxygenation by dioxygen, the ultimate environmentally benign oxidant.

Physico-chemical parameters that govern nanoparticles fate also dictate rules for their molecular evolution

Nanoparticles are efficient to safely deliver therapeutic and imaging contrast agents to tumors for cancer diagnostic and therapy, if they can escape the reticuloendothelial system (RES) and accumulate in tumors either passively due to the enhanced permeability and retention (EPR) effect or actively via a specific ligand. The main hallmark of nanoparticles is their large surface areas, which, depending of their chemical compositions, surface coatings, electric charges, sizes and shapes, will generate complex, extremely dynamic and continuous interactions and exchanges between the nanoparticles and the different molecules present in the blood. Special attention will be paid to explain how the nanoparticles were improved step by step in order to adapt our increasing knowledge on their biophysics. In particular, we will discuss the influence of PEGylation, the difficulties to generate actively targeted particles and finally the actual trends in the manufacturing of "third-generation" smart particles.

Discrete complexes immobilized onto click-SBA-15 silica: controllable loadings and the impact of surface coverage on catalysis

Azidopropyl functionalized mesoporous silica SBA-15 were prepared with variable azide loadings of 0.03-0.7 mmol g(-1) (~2-50% of maximal surface coverage) through a direct synthesis, co-condensation approach. These materials are functionalized selectively with ethynylated organic moieties through a copper-catalyzed azide alkyne cycloaddition (CuAAC) or "click" reaction. Specific loading within a material can be regulated by either the azide loading or limiting the alkyne reagent relative to the azide loading. The immobilization of ferrocene, pyrene, tris(pyridylmethyl)amine (TPA), and iron porphyrin (FeTPP) demonstrates the robust nature and reproducibility of this two-step synthetic attachment strategy. Loading-sensitive pyrene fluorescence correlates with a theoretically random surface distribution, rather than a uniform one; site-isolation of tethered moieties ~15 Å in length occurs at loadings less than 0.02 mmol g(-1). The effect of surface loading on reactivity is observed in the oxygenation of SBA-15-[Cu(I)(TPA)]. SBA-15-[Mn(II)(TPA)]-catalyzed epoxidation exhibits a systematic dependence on surface loading. A comparison of homogeneous, site-isolated and site-dense complexes provides insight into catalyst speciation and ligand activity.

Binding of HIV-1 gp120 glycoprotein to silica nanoparticles modified with CD4 glycoprotein and CD4 peptide fragments

An important step in human immunodeficiency virus infection involves the interaction between the viral envelope glycoprotein gp120 and the human host cell surface receptor CD4. Herein, we describe a CD4-functionalized mesoporous silica-based system to selectively capture HIV-gp120 with high binding efficiency. Using a protection-deprotection strategy developed recently by our group, the external surface of the mesoporous particles was selectively functionalized with soluble CD4 ("sCD4") or an 18-peptide fragment mimicking the gp120 binding region. Confocal microscopy confirmed the CD4 locations and showed that the internal pores can be made accessible after external modification in a controlled manner. An evaluation of the ability of an 18-peptide CD4 fragment versus amide-immobilized sCD4 and sCD4 immobilized through its glycosidic group indicated that while all peptides were selective, the latter method was clearly best, with nearly complete removal of whole gp120 from solution. This study shows, for the first time, that sCD4 bound to mesoporous silica particles actively recognizes and retains high binding affinity for HIV-gp120. It is anticipated that, by proper modification of the accessible internal pores, our methodology can be adopted to develop porous platforms for HIV diagnosis, imaging, drug delivery, and vaccine development.

Different functionalization of the internal and external surfaces in mesoporous materials for biosensing applications using "click" chemistry

We report the use of copper(I)-catalyzed alkyne-azide cycloaddition reaction (CuAAC) to selectively functionalize the internal and external surfaces of mesoporous materials. Porous silicon rugate filters with narrow line width reflectivity peaks were employed to demonstrate this selective surface functionalization approach. Hydrosilylation of a dialkyne species, 1,8-nonadiyne, was performed to stabilize the freshly fabricated porous silicon rugate filters against oxidation and to allow for further chemical derivatization via "click" CuAAC reactions. The external surface was modified through CuAAC reactions performed in the absence of nitrogen-based Cu(I)-stabilizing species (i.e., ligand-free reactions). To subsequently modify the interior pore surface, stabilization of the Cu(I) catalyst was required. Optical reflectivity measurements, water contact angle measurements, Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) were used to demonstrate the ability of the derivatization approach to selectively modify mesoporous materials with different surface chemistry on the exterior and interior surfaces. Furthermore, porous silicon rugate filters modified externally with the cell-adhesive peptide Gly-Arg-Gly-Asp-Ser (GRGDS) allowed for cell adhesion via formation of focal adhesion points. Results presented here demonstrate a general approach to selectively modify mesoporous silicon samples with potential applications for cell-based biosensing.

Enhanced uptake of porous silica microparticles by bifunctional surface modification with a targeting antibody and a biocompatible polymer

Strategies were developed by which mesoporous microparticles were modified on their external surfaces with tetraethylene glycol (TEG), a protein, or both, leaving the pore surfaces available for modification with a separate moiety, such as a dye. Only particles bifunctionally modified with both TEG and a cell-specific antibody were taken up specifically by a targeted cancer cell line. In contrast to similarly functionalized nanoparticles, endocytosed microparticles were not contained within a lysosome.

Postsynthetic functionalization of mesoporous silica

Functionalized mesoporous silica offers promising possibilities for numerous applications, including drug delivery, catalysis, and adsorption. This minireview focuses on recent developments related to the postsynthetic positioning of functional groups on mesoporous silica. After briefly introducing the reagents that are commonly used for this purpose, methods to control and to analyze the distribution of the grafted functional groups are discussed, with particular emphasis on concepts that allow the placement of the groups at specific distances from each other, as well as on approaches towards the selective functionalization of the external particle surface.

Novel polypeptide/thiol--SBA-15 hybrid materials synthesized via surface selective grafting

Novel hybrid materials are synthesized through the surface selective grafting of poly-L-lysine and thiols from SBA-15.

Intraparticle transport and release of dextran in silica spheres with cylindrical mesopores

The transport of oligomeric molecules in silica spheres with cylindrical mesopores has been quantified and related to the structural features of the spherical particles and the interactions at the solid-liquid interface. An emulsion-solvent evaporation method was used to produce silica spheres having cylindrical mesopores with an average pore diameter of 6.5 nm. The transport of dextran molecules (fluorescently tagged) with molecular weights of 3000 and 10,000 g/mol was quantified using confocal laser scanning microscopy (CLSM). The intraparticle concentration profiles in the dextran-containing spheres were flat at all times, suggesting that the release is not isotropic and not limited by diffusion. The release of dextran into the solution is characterized by an initial burst, followed by long-term sustained release. The release follows a logarithmic time dependency, which was rationalized by coupling concentration-dependent effective diffusion constants with adsorption/desorption.