Time-Resolved Long-Lived Luminescence Imaging Method Employing Luminescent Lanthanide Probes with a New Microscopy System

Epitaxial Core/Shell Nanocrystals of (Europium-Doped) Zirconia and Hafnia

A careful design of the nanocrystal architecture can strongly enhance the nanocrystal function. So far, this strategy has faced a synthetic bottleneck in the case of refractory oxides. Here we demonstrate the epitaxial growth of hafnia shells onto zirconia cores and pure zirconia shells onto europium-doped zirconia cores. The core/shell structures are fully crystalline. Upon shelling, the optical properties of the europium dopant are dramatically improved (featuring a more uniform coordination and a longer photoluminescence lifetime), indicating the suppression of nonradiative pathways. These results launch the stable zirconium and hafnium oxide hosts as alternatives for the established NaYF4 systems.

Polymer-Based Terbium Complex as a Fluorescent Probe for Cancer Antigen 125 Detection: A Promising Tool for Early Diagnosis of Ovarian Cancer

A novel photoprobe, Tb-acetylacetone (Tb-ACAC) doped within a modified epoxy cellulose polymer immobilized with CA-125 monoclonal antibody, offers an accurate and highly selective method for early ovarian cancer (OC) diagnosis by detecting cancer antigen 125 (CA-125) in serum samples. This approach leverages quenching of the Tb-ACAC luminescence upon binding to CA-125. Characterization of the photoprobe film through UV-vis and fluorescence measurements confirmed the presence of Tb-ACAC within the polymer matrix. In aqueous solution (pH 6.8, λex = 365 nm), the characteristic emission band of Tb-ACAC at λem = 546.2 nm exhibited significant quenching upon CA-125 binding. This quenching effect enabled the sensitive and specific detection of CA-125 in diverse serum samples from OC patients, demonstrating the applicability, simplicity, and effectiveness of this novel approach.

A Dual-Mode Fluorescent Nanoprobe for the Detection and Visual Screening of Pathogenic Bacterial Spores

Bacterial vegetative cells turn into metabolically dormant spores in certain environmental situations. Once suitable conditions trigger the germination of spores belonging to the pathogenic bacterial category, public safety and environmental hygiene will be threatened, and lives will even be endangered when encountering fatal ones. Instant identification of pathogenic bacterial spores remains a challenging task, since most current approaches belonging to complicated biological methods unsuitable for onsite sensing or emerging alternative chemical techniques are still inseparable from professional instruments. Here we developed a polychromatic fluorescent nanoprobe for ratiometric detection and visual inspection of the pathogenic bacterial spore biomarker, dipicolinic acid (DPA), realizing rapidly accurate screening of pathogenic bacterial spores such as Bacillus anthracis spores. The nanoprobe is made of aminoclay-coated silicon nanoparticles and functionalized with europium ions, exhibiting selective and sensitive response toward DPA and Bacillus subtilis spores (simulants for Bacillus anthracis spores) with excellent linearity. The proposed sensing strategy allowing spore determination of as few as 0.3 × 105 CFU/mL within 10 s was further applied to real environmental sample detection with good accuracy and reliability. Visual quantitative determination can be achieved by analyzing the RGB values of the corresponding test solution color via a color recognition APP on a smartphone. Different test samples can be photographed at the same time, hence the efficient accomplishment of examining bulk samples within minutes. Potentially employed in various on-site sensing occasions, this strategy may develop into a powerful means for distinguishing hazardous pathogens to facilitate timely and proper actions of dealing with multifarious security issues.

Current Development of Lanthanide Complexes for Biomedical Applications

Luminescent molecule-based bioimaging system is widely used for precise localization and distinction of cancer/tumor cells. Luminescent lanthanide (Ln(III)) complexes offer long-lived (sub-millisecond time scale) and sharp (FWHM <10 nm) emission, arising from the forbidden 4f-4f electronic transitions. Luminescent Ln(III) complex-based bioimaging has emerged as a promising option for both in vitro and in vivo visualizations. In this mini-review, the historical development and recent significant progress of luminescent Ln(III) probes for bioapplications are introduced. The recent studies are mainly focused on three points: (i) the structural modifications of Ln(III) complexes in both macrocyclic and small ligands, (ii) the acquirement of high resolution luminescence images of cancer/tumor cells and (iii) the constructions of ratiometric biosensors. Furthermore, our recent study is explained as a new Cancer GPS (cancer grade probing for determining tumor grade through photophysical property analyses of intracellular Eu(III) complex.

Leveraging a smartphone to perform time-gated luminescence measurements

Empowered by advanced on-board sensors, high-performance optics packages and ever-increasing computational power, smartphones have democratized data generation, collection, and analysis. Building on this capacity, many platforms have been developed to enable its use as an optical sensing platform for colorimetric and fluorescence measurements. In this paper, we report the ability to enable a smartphone to perform laboratory quality time-resolved analysis of luminescent samples via the exploitation of the rolling shutter mechanism of the native CMOS imager. We achieve this by leveraging the smartphone's standard image capture applications, commercially available image analysis software, and housing the device within a UV-LED containing case. These low-cost modifications enable us to demonstrate the smartphone's analytical potential by performing tasks ranging from authentication and encryption to the interrogation of packaging, compounds, and physical phenomena. This approach underscores the power of repurposing existing technologies to extend the reach and inclusivity of scientific exploration, opening new avenues for data collection and analysis.

Atomic/molecular layer deposition of europium-organic thin films on nanoplasmonic structures towards FRET-based applications

We present a novel atomic/molecular layer deposition (ALD/MLD) process for europium-organic thin films based on Eu(thd)3 and 2-hydroxyquinoline-4-carboxylic acid (HQA) precursors. The process yields with appreciably high growth rate luminescent Eu-HQA thin films in which the organic HQA component acts as a sensitizer for the red Eu3+ luminescence, extending the excitation wavelength range up to ca. 400 nm. We moreover deposit these films on nanoplasmonic structures to achieve a twentyfold enhanced emission intensity. Finally, we demonstrate the FRET-type energy transfer process for our Eu-HQA coated nanoplasmonic structures in combination with commercial Alexa647 fluorophor, underlining their potential towards novel bioimaging applications.

Low-rate smartphone videoscopy for microsecond luminescence lifetime imaging with machine learning

Time-resolved techniques have been widely used in time-gated and luminescence lifetime imaging. However, traditional time-resolved systems require expensive lab equipment such as high-speed excitation sources and detectors or complicated mechanical choppers to achieve high repetition rates. Here, we present a cost-effective and miniaturized smartphone lifetime imaging system integrated with a pulsed ultraviolet (UV) light-emitting diode (LED) for 2D luminescence lifetime imaging using a videoscopy-based virtual chopper (V-chopper) mechanism combined with machine learning. The V-chopper method generates a series of time-delayed images between excitation pulses and smartphone gating so that the luminescence lifetime can be measured at each pixel using a relatively low acquisition frame rate (e.g. 30 frames per second [fps]) without the need for excitation synchronization. Europium (Eu) complex dyes with different luminescent lifetimes ranging from microseconds to seconds were used to demonstrate and evaluate the principle of V-chopper on a 3D-printed smartphone microscopy platform. A convolutional neural network (CNN) model was developed to automatically distinguish the gated images in different decay cycles with an accuracy of >99.5%. The current smartphone V-chopper system can detect lifetime down to ∼75 µs utilizing the default phase shift between the smartphone video rate and excitation pulses and in principle can detect much shorter lifetimes by accurately programming the time delay. This V-chopper methodology has eliminated the need for the expensive and complicated instruments used in traditional time-resolved detection and can greatly expand the applications of time-resolved lifetime technologies.

Time-Resolved Luminescent Sensing and Imaging for Enzyme Catalytic Activity Based on Responsive Probes

Enzymes, as a kind of biomacromolecules, play an important role in many physiological processes and relate directly to various diseases. Developing an efficient detection method for enzyme activity is important to achieve early diagnosis of enzyme-relevant diseases and high throughput screening of potential enzyme-relevant drugs. Time-resolved luminescence assay provide a high accuracy and signal-to-noise ratios detection methods for enzyme activity, which has been widely used in high throughput screening of enzyme-relevant drugs and diagnosis of enzyme-relevant diseases. Inspired by these advantages, various responsive probes based on metal complexes and metal-free organic compounds have been developed for time-resolved bioimaging and biosensing of enzyme activity owing to their long luminescence lifetimes, high quantum yields and photostability. In this review, we comprehensively reviewed metal complex- and metal-free organic compound-based responsive probes applied to detect enzyme activity through time-resolved imaging, including their design strategies and sensing principles. Current challenges and future prospects in this rapidly growing field are also discussed.

Excited-State Dynamics of Crossing-Controlled Energy Transfer in Europium Complexes

Photosensitized energy transfer (EnT) phenomena occur frequently in a variety of photophysical and photochemical processes and have traditionally been treated with the donor-acceptor distance-dependent Förster and Dexter models. However, incorrect arguments and formulae were employed by ignoring energy resonance conditions and the selection rules of the state-to-state transition in special cases, especially for the sensitive intramolecular EnT of lanthanide complexes. Herein, we proposed an innovative model of energy-degeneracy-crossing-controlled EnT, which can be experimentally confirmed by time-resolved two-dimensional photoluminescence measurements. The computationally determined energy resonance region provides the most effective channel to achieve metal-to-ligand EnT beyond the distance-dependent model and sensitively bifurcates into symmetry-allowed or -forbidden channels for some representative europium antenna complexes. The outcomes of the multidisciplinary treatment contribute to a complementary EnT model that can be tuned by introducing a phosphorescence modulator and altering the antenna-related parameters of the ligand-centered energy level of the ³ππ* state and its spin-orbit coupling for the ³ππ* → S₀ ^* transition through mechanism-guided crystal engineering and should motivate further development of mechanistic models and applications.

Luminescent Lifetime Regulation of Lanthanide-Doped Nanoparticles for Biosensing

Lanthanide-doped nanoparticles possess numerous advantages including tunable luminescence emission, narrow peak width and excellent optical and thermal stability, especially concerning the long lifetime from microseconds to milliseconds. Differing from other shorter-lifetime fluorescent nanomaterials, the long lifetime of lanthanide-doped nanomaterials is independent with background fluorescence interference and biological tissue depth. This review presents the recent advances in approaches to regulating the lifetime and applications of bioimaging and biodetection. We begin with the introduction of the strategies for regulating the lifetime by modulating the core-shell structure, adjusting the concentration of sensitizer and emitter, changing energy transfer channel, establishing a fluorescence resonance energy transfer pathway and changing temperature. We then summarize the applications of these nanoparticles in biosensing, including ion and molecule detecting, DNA and protease detection, cell labeling, organ imaging and thermal and pH sensing. Finally, the prospects and challenges of the lanthanide lifetime regulation for fundamental research and practical applications are also discussed.

TADF-based NIR-II semiconducting polymer dots for in vivo 3D bone imaging

Intraoperative fluorescence imaging in the second near-infrared (NIR-II) region heralds a new era in image-guided surgery since the success in the first-in-human liver-tumor surgery guided by NIR-II fluorescence. Limited by the conventional small organic NIR dyes such as FDA-approved indocyanine green with suboptimal NIR-II fluorescence and non-targeting ability, the resulting shallow penetration depth and high false positive diagnostic values have been challenging. Described here is the design of NIR-II emissive semiconducting polymer dots (Pdots) incorporated with thermally activated delayed fluorescence (TADF) moieties to exhibit emission maxima of 1064–1100 nm and fluorescence quantum yields of 0.40–1.58% in aqueous solutions. To further understand how the TADF units affect the molecular packing and the resulting optical properties of Pdots, in-depth and thorough density-functional theory calculations were carried out to better understand the underlying mechanisms. We then applied these Pdots for in vivo 3D bone imaging in mice. This work provides a direction for future designs of NIR-II Pdots and holds promising applications for bone-related diseases.

A series of NIR-II fluorescent TADF-incorporated polymer dots were successfully synthesized. The function of the TADF moiety was fully studied and the bio-applications of these polymer dots including bone imaging were also demonstrated.

Thermally Activated Delayed Fluorescence Enabled by Reversed Conformational Distortion for Blue Emitters

In this work, we present for the first time a general strategy via molecular reversed conformational distortion for thermally activated delayed fluorescence (TADF). A model purely organic compound named BNNIO with a common fluorophore flexibly linked to benzene by an oxygen atom is rationally designed and successfully synthesized. Moreover, the rate constant of reverse intersystem crossing reaches 2.34 × 10⁴ s^-1 as determined by transient spectroscopy. As a result, TADF emission of BNNIO is observed with a photoluminescence quantum yield of 90.72% and a lifetime of 84.76 μs at 415 nm. This universal regulation strategy undoubtedly opens a new avenue for the development of novel purely organic blue light-emitting materials.

Red-Emissive Cell-Penetrating Polymer Dots Exhibiting Thermally Activated Delayed Fluorescence for Cellular Imaging

Fluorescence imaging in living cells is key to understanding many biological processes, yet autofluorescence from the sample can lower sensitivity and hinder high-resolution imaging. Time-gated measurements using phosphorescent metal complexes can improve imaging, at the cost of potential toxicity from the use of heavy metals. Here, we describe orange/red-emitting polymer dots (Pdots) exhibiting thermally activated delayed fluorescence (TADF) for time-gated imaging. Inspired by the cell invasion mechanism of the HIV TAT protein, the Pdots were formed from block copolymers composed of a hydrophilic guanidine-rich block as a cell-penetrating peptide mimic, and a rigid organic semiconductor block to provide efficient delayed fluorescence. These all-organic polymer nanoparticles were shown to efficiently enter HeLa, CHO, and HepG2 cells within 30 min, with cell viabilities remaining high for Pdot concentrations up to 25 mg mL^-1. Pdot quantum yields were as high as 0.17 in aerated water, with the Pdot structure effectively shielding the TADF emitters from quenching by oxygen. Colocalization experiments revealed that the Pdots primarily accumulate outside of lysosomes, minimizing lysosomal degradation. When used for fixed cellular imaging, Pdot-incubated cells showed high signal-to-background ratios compared to control samples with no Pdot exposure. Using time-resolved spectroscopy, the delayed emission of the TADF materials was effectively separated from that of both a biological serum and a secondary fluorescent dye.

Functional Micro-/Nanomaterials for Multiplexed Biodetection

When analyzing biological phenomena and processes, multiplexed biodetection has many advantages over single-factor biodetection and is highly relevant to both human health issues and advancements in the life sciences. However, many key problems with current multiplexed biodetection strategies remain unresolved. Herein, the main issues are analyzed and summarized: 1) generating sufficient signal to label targets, 2) improving the signal-to-noise ratio to ensure total detection sensitivity, and 3) simplifying the detection process to reduce the time and labor costs of multiple target detection. Then, available solutions made possible by designing and controlling the properties of micro- and nanomaterials are introduced. The aim is to emphasize the role that micro-/nanomaterials can play in the improvement of multiplexed biodetection strategies. Through analyzing existing problems, introducing state-of-the-art developments regarding relevant materials, and discussing future directions of the field, it is hopeful to help promote necessary developments in multiplexed biodetection and associated scientific research.

Novel fluorescent nano-sensor based on amino-functionalization of Eu3+:SrSnO3 for copper ion detection in food and real drink water samples

Lanthanide-doped nanoparticles exhibit unique optical properties and have been widely utilized for different sensing applications. Herein, the Eu3+:SrSnO3@APTS nanosensor was synthesized and its optical properties were analyzed using UV-Vis and photoluminescence spectroscopy. The TEM images of the synthesized nanophosphor Eu3+:SrSnO3@APTS exhibited peanut-like morphology, composed of two or more spherical nanoparticles with an average diameter ∼33 nm. Effects of environmental pH values and doping concentrations as well as amino functionalization on the structure of Eu3+:SrSnO3 were investigated. The as-synthesized optical nanosensor was used for determination of copper ions based on a fluorescence quenching approach. Red emission with a long lifetime was obtained in the case of the 0.06 mol Eu3+:SrSnO3@APTS sample. Under the optimal experimental conditions, a Stern-Volmer plot exhibited a good linearity for copper ions over the concentration (0.00-10.8) × 10-11 mol L-1 with a correlation efficient of 0.996 and a limit of detection 3.4 × 10-12 mol L-1. The fluorescent sensor was dynamically quenched via a coulombic interaction mechanism between the Eu3+ (5L6) and Cu2+. The Eu3+:SrSnO3@APTS nanosensor with the optimal Eu3+ dopant concentration of 0.06 mol was applied for copper determination in food and real drink water samples with high recovery values. We believe that the developed nanosensor probe can also be used for the detection of other toxic compounds, with high selectivity and sensitivity.

Supramolecular AIE polymer-based rare earth metallogels for the selective detection and high efficiency removal of cyanide and perchlorate

Two novel supramolecular AIE polymer-based rare earth metallogels (PT-GEu and PT-GTb) have been rationally designed and synthesized for the efficient detection and removal of cyanide (CN⁻) and perchlorate (ClO₄⁻).

New 1,3-Disubstituted Benzo[h]Isoquinoline Cyclen-Based Ligand Platform: Synthesis, Eu3+ Multiphoton Sensitization and Imaging Applications

The development of lanthanide-based luminescent probes with a long emission lifetime has the potential to revolutionize imaging-based diagnostic techniques. By a rational design strategy taking advantage of computational predictions, a novel, water-soluble Eu³⁺ complex from a cyclen-based ligand bearing 1,3-disubstituted benzo[h]isoquinoline arms was realized. The ligand has been obtained overcoming the lack of reactivity of position 3 of the isoquinoline moiety. Notably, steric hindrance of the heteroaromatic chromophore allowed selective and stoichiometry-controlled insertion of two or three antennas on the cyclen platform without any protection strategy. The complex bears a fourth heptanoic arm for easy conjugation to biomolecules. This new chromophore allowed the sensitization of the metal center either with one or two photons excitation. The suitability as a luminescent bioprobe was validated by imaging BMI1 oncomarker in lung carcinoma cells following an established immunofluorescence approach. The use of a conventional epifluorescence microscope equipped with a linear structured illumination module disclosed a simple and inexpensive way to image confocally Ln-bioprobes by single photon excitation in the 350–400 nm window, where ordinary confocal systems have no excitation sources.

Design, synthesis and application in biological imaging of a novel red fluorescent dye based on a rhodanine derivative

A novel acceptor–donor–acceptor type molecule, namely 2-triphenylamine-1,3-dia[2-(3-ethyl-4-oxo-thiazolidin-2-ylidene)-malononitrile] (2RDNTPA), is designed and synthesized. 2RDNTPA exhibits a large Stokes shift of 244 nm and red fluorescence emission of 629 nm with a decent photoluminescence quantum yield of 13%. Furthermore, as a potential red fluorescent dye, 2RDNTPA can be applied in fluorescence imaging of living cancer cells (HepG2) with negligible cytotoxicity and a half maximal inhibitory concentration much more than 100 μM.

2RDNTPA can be applied in fluorescence imaging of living cancer cells (HepG2) with red emission of 620 nm and negligible cytotoxicity with a half maximal inhibitory concentration much more than 100 μM.

Lanthanide-Based Optical Probes of Biological Systems

The unique photophysical properties of lanthanides, such as europium, terbium, and ytterbium, make them versatile molecular probes of biological systems. In particular, their long-lived photoluminescence, narrow bandwidth emissions, and large Stokes shifts enable experiments that are infeasible with organic fluorophores and fluorescent proteins. The ability of these metal ions to undergo luminescence resonance energy transfer, and photon upconversion further expands the capabilities of lanthanide probes. In this review, we describe recent advances in the design of lanthanide luminophores and their application in biological research. We also summarize the latest detection systems that have been developed to fully exploit the optical properties of lanthanide luminophores. We conclude with a discussion of remaining challenges and new frontiers in lanthanide technologies. The unprecedented levels of sensitivity and multiplexing afforded by rare-earth elements illustrate how chemistry can enable new approaches in biology.

Multi-Color Luminescence Transition of Upconversion Nanocrystals via Crystal Phase Control with SiO2 for High Temperature Thermal Labels

Upconversion nanocrystals (UCNs)-embedded microarchitectures with luminescence color transition capability and enhanced luminescence intensity under extreme conditions are suitable for developing a robust labeling system in a high-temperature thermal industrial process. However, most UCNs based labeling systems are limited by the loss of luminescence owing to the destruction of the crystalline phase or by a predetermined luminescence color without color transition capability. Herein, an unusual crystal phase transition of UCNs to a hexagonal apatite phase in the presence of SiO2 nanoparticles is reported with the enhancements of 130-fold green luminescence and 52-fold luminance as compared to that of the SiO2-free counterpart. By rationally combining this strategy with an additive color mixing method using a mask-less flow lithography technique, single to multiple luminescence color transition, scalable labeling systems with hidden letters-, and multi-luminescence colored microparticles are demonstrated for a UCNs luminescence color change-based high temperature labeling system.

Time-resolved microfluidic flow cytometer for decoding luminescence lifetimes in the microsecond region

Time-resolved luminescence detection using long-lived probes with lifetimes in the microsecond region have shown great potential in ultrasensitive and multiplexed bioanalysis. In flow cytometry, however, the long lifetime poses a significant challenge to measure wherein the detection window is often too short to determine the decay characteristics. Here we report a time-resolved microfluidic flow cytometer (tr-mFCM) incorporating an acoustic-focusing chip, which allows slowing down of the flow while providing the same detection conditions for every target, achieving accurate lifetime measurement free of autofluorescence interference. Through configuration of the flow velocity and detection aperture with respect to the time-gating sequence, a multi-cycle luminescence decay profile is captured for every event under maximum excitation and detection efficiency. A custom fitting algorithm is then developed to resolve europium-stained polymer microspheres as well as leukemia cells against abundant fluorescent particles, achieving counting efficiency approaching 100% and lifetime CVs (coefficient of variation) around 2-6%. We further demonstrate lifetime-multiplexed detection of prostate and bladder cancer cells stained with different europium probes. Our acoustic-focusing tr-mFCM offers a practical technique for rapid screening of biofluidic samples containing multiple cell types, especially in resource-limited environments such as regional and/or underdeveloped areas as well as for point-of-care applications.

Monitoring Fe(II) Spin-State Equilibria via Eu(III) Luminescence in Molecular Complexes: Dream or Reality?

The modulation of light emission by Fe(II) spin-crossover processes in multifunctional materials has recently attracted major interest for the indirect and noninvasive monitoring of magnetic information storage. In order to approach this goal at the molecular level, three segmental ligand strands, L4-L6, were reacted with stoichiometric mixtures of divalent d-block cations (M(II) = Fe(II) or Zn(II)) and trivalent lanthanides (Ln(III) = La(III) or Eu(III)) in acetonitrile to give C₃-symmetrical dinuclear triple-stranded helical [LnM(Lk)₃]⁵⁺ cations, which can be crystallized with noncoordinating counter-anions. The divalent metal M(II) is six-coordinate in the pseudo-octahedral sites produced by the facial wrapping of the three didentate binding units, the ligand field of which induces variable Fe(II) spin-state properties in [LnFe(L4)₃]⁵⁺ (strictly high-spin), [LnFe(L5)₃]⁵⁺ (spin-crossover (SCO) around room temperature), and [LnFe(L6)₃]⁵⁺ (SCO at very low temperature). The introduction of the photophysically active Eu(III) probe in [EuFe(Lk)₃]⁵⁺ results in europium-centered luminescence modulated by variable intramolecular Eu(III) → Fe(II) energy-transfer processes. The kinetic analysis implies Eu(III) → Fe(II) quenching efficiencies close to 100% for the low-spin configuration and greater than 95% for the high-spin state. Consequently, the sensitivity of indirect luminescence detection of Fe(II) spin crossover is limited by the resulting weak Eu(III)-centered emission intensities, but the dependence of the luminescence on the temperature unambiguously demonstrates the potential of indirect lanthanide-based spin-state monitoring at the molecular scale.

Terbium(iii)-coated carbon quantum dots for the detection of clomipramine through aggregation-induced emission from the analyte

CQD-Tb: a selective chemosensor for detecting the antidepressant drug clomipramine in aqueous media.

Series of Highly Luminescent Macrocyclic Sm(III) Complexes: Functional Group Modifications Together with Luminescence Performances in Solid-State, Solution, and Doped Poly(methylmethacrylate) Film

Here, we report our trials to regulate the luminescence performance of the macrocyclic samarium(III) complex and prepare four excellent luminescent Sm(III) complex-doped poly(methylmethacrylate) (PMMA) composites. Four 23-membered [1 + 1] Schiff-base macrocyclic mononuclear Sm(III) complexes, Sm-2 _a -Sm-2 _d , originating from dialdehydes with different pendant arms and 1,2-bis(2-aminoethoxy)ethane, have been constructed by the template method. Crystal structures reveal that every Sm(III) ion with the coordination geometry of a distorted bicapped square antiprism is capsulated by the macrocyclic cavity environment forming the "lasso-type" protection. Relative photophysical properties of macrocyclic Sm(III) complexes are carefully investigated in solid-state, methanol solution, and doped PMMA film, and all these show characteristic emissions of the Sm(III) ion associated with satisfactory lifetimes and quantum yields in all media, which could be comparable to reported outstanding examples. Especially, the luminescence performance for this type of Sm(III) complex could be regulated in the solid state by the use of different functional groups in the pendant arm while it is not achieved in solution and the doped PMMA composite. High emitting and air-stable plastic materials could be obtained when these Sm(III) complexes are doped in PMMA with 0.1 wt % mixing ratio, and the corresponding maximum lifetime and quantum yield are 61.2 μs and 0.63% in the case of complex Sm-2 _a , respectively. We believe that these highly luminescent "lasso-type" Sm(III) complexes and doped PMMA composites are valuable references in the design of luminescent lanthanide(III) hybrid materials.

Luminescence Lifetime-Based In Vivo Detection with Responsive Rare Earth-Dye Nanocomposite

For years, luminescence lifetime imaging has served as a quantitative tool in indicating intracellular components and activities. However, very few studies involve the in vivo study of animals, especially in vivo stimuli-responsive activities of animals, as both excitation and emission wavelengths should fall into the near-infrared (NIR) optical transparent window (660-950 and 1000-1500 nm). Herein, this work reports a lifetime-responsive nanocomposite with both excitation and emission in the NIR I window (800 nm) and lifetime in the microsecond region. The incorporation of Tm³⁺ -doped rare-earth nanocrystals and NIR dye builds an efficient energy transfer pathway that enables a tunable luminescence lifetime range. The NaYF₄ :Tm nanocrystal, which absorbs and emits photons at the same energy level, is found to be 33 times brighter than optimized core-shell upconversion nanocrystals, and proved to be an effective donor for NIR luminescence resonance energy transfer (LRET). The anti-interference capability of luminescence lifetime signals is further confirmed by luminescence and lifetime imaging. In vivo studies also verify the lifetime response upon stimulation generated in an arthritis mouse model. This work introduces an intriguing tool for luminescence lifetime-based sensing in the microsecond region.

Hydrophilic, Red-Emitting, and Thermally Activated Delayed Fluorescence Emitter for Time-Resolved Luminescence Imaging by Mitochondrion-Induced Aggregation in Living Cells

Thermally activated delayed fluorescence (TADF) materials have provided new strategies for time-resolved luminescence imaging (TRLI); however, the development of hydrophilic TADF luminophores for specific imaging in cells remains a substantial challenge. In this study, a mitochondria-induced aggregation strategy for TRLI is proposed with the design and utilization of the hydrophilic TADF luminophore ((10-(1,3-dioxo-2-phenyl-2,3-dihydro-1H-benzo[de]isoquinolin-6-yl)-9,9-dimethyl-9,10-dihydroacridin-2-yl)methyl)triphenylphosphonium bromide (NID-TPP). Using a nonconjugated linker to introduce a triphenylphosphonium (TPP+) group into the 6-(9,9-dimethylacridin-10(9H)-yl)-2-phenyl-1H-benzo[de]isoquinoline-1,3(2H)-dione (NID) TADF luminophore preserves the TADF emission of NID-TPP. NID-TPP shows clear aggregation-induced delayed fluorescence enhancement behavior, which provides a practical strategy for long-lived delayed fluorescence emission in an oxygen-containing environment. Finally, the designed mitochondrion-targeting TPP+ group in NID-TPP induces the adequate accumulation of NID-TPP and results in the first reported TADF-based time-resolved luminescence imaging and two-photon imaging of mitochondria in living cells.

Ratiometric fluorescence determination of the anthrax biomarker 2,6-dipicolinic acid using a Eu3+/Tb3+-doped nickel coordination polymer

Tb³⁺_0.6/Eu³⁺_0.4@Ni-BTC is a quantitative ratiometric fluorescence sensor for DPA detection with high sensitivity, anti-interference, rapid response and durability.

Time domain X-ray luminescence computed tomography: numerical simulations

X-ray luminescence computed tomography (XLCT) has the potential to image the biodistribution of nanoparticles inside deep tissues. In XLCT, X-ray excitable nanophosphors emit optical photons for tomographic imaging. The lifetime of the nanophosphor signal, rather than its intensity, could be used to extract biological microenvironment information such as oxygenation in deep tumors. In this study, we propose the design, the forward model, and the reconstruction algorithm of a time domain XLCT for lifetime imaging with high spatial resolution. We have investigated the feasibility of the proposed design with numerical simulations. We found that the reconstructed lifetime images are robust to noise levels up to 5% and to unknown optical properties up to 4 times of absorption and scattering coefficients.

An I6P7peptide modified fluorescent probe for bio-imaging

DMPexhibits high tumor cell affinity and favorable mitochondria-targeting capability.DMPexhibits high pH stability and good water-solubility.

A highly selective lanthanide-containing probe for ratiometric luminescence detection of an anthrax biomarker

We report a ratiometric luminescent sensor that can identify the Bacillus anthrax biomarker with outstanding selectivity, even including all of the 5 DPA isomers.

Fabrication and photoluminescent properties of Tb3+ doped carbon nanodots

Carbon nanodots (CNDs) doped with Tb ions were synthesized using different synthetic routes: hydrothermal treatment of a solution containing carbon source (sodium dextran sulfate) and TbCl3; mixing of CNDs and TbCl3 solutions; freezing-induced loading of Tb and carbon-containing source into pores of CaCO3 microparticles followed by hydrothermal treatment. Binding of Tb ions to CNDs (Tb-CND coupling) was confirmed using size-exclusion chromatography and manifested itself through a decrease of the Tb photoluminescence lifetime signal. The shortest Tb photoluminescence lifetime was observed for samples obtained by hydrothermal synthesis of CaCO3 microparticles where Tb and carbon source were loaded into pores via the freezing-induced process. The same system displays an increase of Tb photoluminescence via energy transfer with excitation at 320-340 nm. Based on the obtained results, freezing-induced loading of cations into CNDs using porous CaCO3 microparticles as reactors is proposed to be a versatile route for the introduction of active components into CNDs. The obtained CNDs with long-lived emission may be used for time-resolved imaging and visualization in living biological samples where time-resolved and long-lived luminescence microscopy is required.

Rational design of time-resolved turn-on fluorescence sensors: exploiting delayed fluorescence for hydrogen peroxide sensing

Weakly emissive phosphine compounds, which contain a carbazolyl donor-triarylboryl acceptor luminophore, become strongly delayed fluorescent upon changes to their oxide forms. Time-gated acquisition of the fluorescence signals of phosphine in the presence of H2O2 and a competitive fluorescence dye allow for detection of H2O2 with elimination of short-lived fluorescence noise.

Lanthanide-based tools for the investigation of cellular environments

Biological probes constructed from lanthanides can provide a variety of readout signals, such as the luminescence of Eu(iii), Tb(iii), Yb(iii), Sm(iii) and Dy(iii), and the proton relaxation enhancement of Gd(iii) and Eu(ii). For numerous applications the intracellular delivery of the lanthanide probe is essential. Here, we review the methods for the intracellular delivery of non-targeted complexes (i.e. where the overall complex structure enhances cellular uptake), as well as complexes attached to a targeting unit (i.e. to a peptide or a small molecule) that facilitates delivery. The cellular applications of lanthanide-based supramolecules (dendrimers, metal organic frameworks) are covered briefly. Throughout, we emphasize the techniques that can confirm the intracellular localization of the lanthanides and those that enable the determination of the fate of the probes once inside the cell. Finally, we highlight methods that have not yet been applied in the context of lanthanide-based probes, but have been successful in the intracellular delivery of other metal-based probes.

Phosphorescence Lifetime Imaging of Labile Zn2+ in Mitochondria via a Phosphorescent Iridium(III) Complex

Phosphorescence lifetime Zn²⁺ imaging possesses the advantage over normal fluorescence imaging in offering the more accurate temporal-spatial Zn²⁺ information. Herein, we report a new phosphorescent cyclometalated Ir(III) complex with a Zn²⁺-chelator bearing 1,10-phenanthrolin acting as ancillary ligand, Zin-IrDPA, which displays the specific Zn²⁺-induced enhancement of phosphorescence and phosphorescence lifetime, and the mitochondria-targeting ability. Moreover, its Zn²⁺-induced phosphorescence lifetime enhancement factor is not affected by medium lipophilicity, viscosity, polarity, and especially ambient oxygen. The reversible tracking of introduced exogenous labile Zn²⁺ in MCF-7 and HeLa cells via phosphorescence imaging and phosphorescence lifetime imaging (PLIM) have been realized with Zin-IrDPA. Moreover, PLIM with Zin-IrDPA is able to track the SNOC-stimulated endogenous Zn²⁺ release in mitochondria.

Cationic Europium Complexes for Visualizing Fluctuations in Mitochondrial ATP Levels in Living Cells

The ability to study cellular metabolism and enzymatic processes involving adenosine triphosphate (ATP) is impeded by the lack of imaging probes capable of signalling the concentration and distribution of intracellular ATP rapidly, with high sensitivity. We report here the first example of a luminescent lanthanide complex capable of visualizing changes in the concentration of ATP in the mitochondria of living cells. Four cationic europium(III) complexes [Eu.1-4]+ have been synthesized and their binding capabilities towards nucleoside polyphosphate anions examined in aqueous solution at physiological pH. Complexes [Eu.1]+ and [Eu.3]+ bearing hydrogen bond donor groups in the pendant arms showed excellent discrimination between ATP, ADP and monophosphate species. Complex [Eu.3]+ showed relatively strong binding to ATP (logKa =5.8), providing a rapid, long-lived luminescent signal that enabled its detection in a highly competitive aqueous medium containing biologically relevant concentrations of Mg2+ , ADP, GTP, UTP and human serum albumin. This EuIII complex responds linearly to ATP within the physiological concentration range (1-5 mm), and was used to continuously monitor the apyrase-catalyzed hydrolysis of ATP to ADP in vitro. We demonstrate that [Eu.3]+ can permeate mammalian (NIH-3T3) cells efficiently and localize to the mitochondria selectively, permitting real-time visualization of elevated mitochondrial ATP levels following treatment with a broad spectrum kinase inhibitor, staurosporine, as well as depleted ATP levels upon treatment with potassium cyanide under glucose starvation conditions.