Charge Carrier Formation in Polythiophene/Fullerene Blend Films Studied by Transient Absorption Spectroscopy

Effective promotion of steric hindrance effect on singlet-triplet transition of para-linked carbazole-biphenyl by transient absorption spectroscopy

The para-linked carbazole-biphenyl (CBP) is commonly utilized in phosphorescent organic light-emitting diodes. This study investigates the steric hindrance and heavy-atom effects in CBP derivatives through transient absorption spectroscopy. In contrast to CBP, CBP derivatives shows new triplet-triplet absorption signals and isosbestic points, accompanied by the decay of excited state absorption signal, which indicates the occurrence of intersystem crossing (ISC). The experimental ISC lifetimes for mCBP, CDBP, and CPB-2Br are 8 ns, 7.4 ns, and 0.103 ns respectively, aligning with the increased theoretical spin-orbit coupling constants (ξ) of S1 → T1 (0.032 cm-1 < 0.034 cm-1 < 1.26 cm-1). Notably, compared to CDBP (0.75 cm-1, 0.3 μs), the lower ξ(T1, S0) of mCBP (0.014 cm-1) extending the experimental triplet-exciton lifetimes (τT) to 1.97 μs. The τT (1.92 μs) of CBP-2Br is prolonged due to the significantly reduced recombination energy (2073.52 cm-1). This study provides insights into prolonging the lifetime of halogen-free phosphorescent molecules.

Comparative study on charge photogeneration dynamics of Y small molecule and polymerized Y small molecule based polymer solar cells

Understanding charge photogeneration processes in polymer solar cells utilizing polymerized Y-molecule acceptors (PYMAs) is of great importance for design and optimization of high-performance solar cells. In this work, excited state dynamics in PYMAs (PYT, PY-DT) and corresponding solar cells were comparably studied with those of Y small molecules (Y5, Y6) by using the steady state and time-resolved spectroscopies as well as time-dependent density functional theory calculation. We find that PYMA (PYT, PY-DT) films exhibit smaller Stokes shifts than that of Y small molecules, indicating a more rigid backbone of PYMAs. Temperature-dependent steady-state PL measurement reveals that compared to small molecule films, the energy barrier from radiative to non-radiative states is smaller in PYMA films. In addition, transient absorption spectroscopy demonstrates that the exciton diffusion process in PYT and PY-DT are mainly intra-chain exciton diffusion mechanism with exciton diffusion coefficients of 1.7 × 10-2 and 2.7 × 10-2 cm2 s-1, respectively, in contrast with the inter-molecular exciton diffusion in Y5 and Y6 films. For the blend films, the phase sizes of acceptors in PM6:PYT and PM6:PY-DT are determined as 2.3 and 3.3 nm, respectively, smaller than that of Y6 (4.7 nm) in the PM6:Y6 film. In addition, unlike bimolecular recombination in classical system PM6:Y6, the PYMA-based all-polymer solar cells exhibit geminate type recombination in ultrafast timescale. We find that carrier lifetime plays a critical role in the performance of PYMA-based polymer solar cells. This work provides a comprehensive understanding of the photophysical properties of PYMAs, which is pivotal for designing highly efficient all-polymer solar cells.

Activationless Charge Transfer Drives Photocurrent Generation in Organic Photovoltaic Blends Independent of Energetic Offset

Organic photovoltaics (OPVs) have recently shown substantial progress in enhancing device efficiency, driven in particular by advances in the design of nonfullerene acceptors and the reduction of the energy offset driving exciton separation at the donor/acceptor interface. Herein, we employ temperature-dependent transient absorption spectroscopy to investigate the activation energy for charge generation and recombination in a range of bulk heterojunction blends with nonfullerene acceptors. Remarkably, we find that in all cases charge generation is almost activationless, in the range of 11-21 meV, independent of energetic offset. Geminate recombination is also observed to be almost activationless, with only the kinetics of bimolecular charge recombination being strongly temperature-dependent, with an activation energy >400 meV. Our observation of essentially activationless charge generation, independent of energy offset, strongly indicates that charge generation in such blends does not follow Marcus theory but can rather be considered an adiabatic process associated with the motion of thermally unrelaxed carriers.

Theoretical description of photoinduced electron transfer in donor-acceptor supramolecular complexes based on carbon buckybowls

Herein, we explore, from a theoretical perspective, the nonradiative photoinduced processes (charge separation and energy transfer) within a family of donor-acceptor supramolecular complexes based on the electron-donor truxene-tetrathiafulvalene (truxTTF) derivative and a series of curved fullerene fragments (buckybowls) of different shapes and sizes (C30H12, C32H12, and C38H14) as electron acceptors that successfully combine with truxTTF via non-covalent interactions. The resulting supramolecular complexes (truxTTF·C30H12, truxTTF·C32H12, and truxTTF·C38H14) undergo charge-separation processes upon photoexcitation through charge-transfer states involving the donor and acceptor units. Despite the not so different size of the buckybowls, they present noticeable differences in the charge-separation efficiency owing to a complex decay post-photoexcitation mechanism involving several low-lying excited states of different natures (local and charge-transfer excitations), all closely spaced in energy. In this intricate scenario, we have adopted a theoretical approach combining electronic structure calculations at (time-dependent) density functional theory, a multistate multifragment diabatization method, the Marcus-Levitch-Jortner semiclassical rate expression, and a kinetic model to estimate the charge separation rate constants of the supramolecular heterodimers. Our outcomes highlight that the efficiency of the photoinduced charge-separation process increases with the extension of the buckybowl backbone. The supramolecular heterodimer with the largest buckybowl (truxTTF·C38H14) displays multiple and efficient electron-transfer pathways, providing a global photoinduced charge separation in the ultrafast time scale in line with the experimental findings. The study reported indicates that modifications in the shape and size of buckybowl systems can give rise to attractive novel acceptors for potential photovoltaic applications.

Pulsed Laser-Bleaching Semiconductor and Photodetector

Pulsed lasers alter the optical properties of semiconductors and affect the photoelectric function of the photodetectors significantly, resulting in transient changes known as bleaching. Bleaching has a profound impact on the control and interference of photodetector applications. Experiments using pump-probe techniques have made significant contributions to understanding ultrafast carrier dynamics. However, there are few theoretical studies to the best of our knowledge. Here, carrier dynamic models for semiconductors and photodetectors are established, respectively, employing the rectified carrier drift-diffusion model. The pulsed laser bleaching effect on seven types of semiconductors and photodetectors from visible to long-wave infrared is demonstrated. Additionally, a continuous bleaching method is provided, and the finite-difference time-domain (FDTD) method is used to solve carrier dynamic theory models. Laser parameters for continuous bleaching of semiconductors and photodetectors are calculated. The proposed bleaching model and achieved laser parameters for continuous bleaching are essential for several applications using semiconductor devices, such as infrared detection, biological imaging, and sensing.

Manipulating the functionality and structures of π-conjugated polymers utilizing intramolecular noncovalent interactions towards efficient organic photovoltaics

Careful control of electronic properties, structural order, and solubility of π-conjugated polymers is central to the improvement of organic photovoltaic (OPV) performance. In this work, we designed and synthesized a series of naphthobisthiadiazole-quaterthiophene copolymers by systematically replacing the alkyl groups with ester groups and changing the position of the fluorine groups in the quaterthiophene moiety. These alterations lowered the HOMO and LUMO energy levels and systematically varied the combination of intramolecular noncovalent interactions such as O⋯S and F⋯S interactions in the backbone. More importantly, although the introduction of such noncovalent interactions often lowers the solubility owing to the interlocking of backbone linkages, we found that careful design of the noncovalent interactions afforded polymers with relatively high solubility and high crystallinity at the same time. As a result, the power conversion efficiency of OPV cells that used fullerene (PC61BM) and nonfullerene (Y12) as the acceptor was improved. Our work offers important information for the development of high-performance π-conjugated polymers for OPVs.

Spontaneous-Symmetry-Breaking Charge Separation Induced by Pseudo-Jahn-Teller Distortion in Organic Photovoltaic Material

The driving force of charge separation in the initial photovoltaic conversion process is theoretically investigated using ITIC, a nonfullerene acceptor material for organic photovoltaic devices. The density functional theory calculations show that the pseudo-Jahn-Teller (PJT) distortion of the S1 excimer state induces spontaneous symmetry-breaking charge separation between the identical ITIC molecules even without the asymmetry of the surrounding environment. The strong PJT effect arises from the vibronic coupling between the pseudodegenerate S1 and S2 excited states with different irreducible representations (irreps), i.e., Au for S1 and Ag for S2, via the asymmetric vibrational mode with the Au irrep. The vibrational mode responsible for the spontaneous polarization, which is opposite in one ITIC monomer and the other, is the intramolecular C-C stretching vibration between the core IT and terminal IC units. These results suggest that controlling the PJT effect can improve the charge separation efficiency of the initial photovoltaic conversion process.

Organic photovoltaics: The current challenges

Organic photovoltaics are remarkably close to reaching a landmark power conversion efficiency of 20%. Given the current urgent concerns regarding climate change, research into renewable energy solutions is crucially important. In this perspective article, we highlight several key aspects of organic photovoltaics, ranging from fundamental understanding to implementation, that need to be addressed to ensure the success of this promising technology. We cover the intriguing ability of some acceptors to undergo efficient charge photogeneration in the absence of an energetic driving force and the effects of the resulting state hybridization. We explore one of the primary loss mechanisms of organic photovoltaics-non-radiative voltage losses-and the influence of the energy gap law. Triplet states are becoming increasingly relevant owing to their presence in even the most efficient non-fullerene blends, and we assess their role as both a loss mechanism and a potential strategy to enhance efficiency. Finally, two ways in which the implementation of organic photovoltaics can be simplified are addressed. The standard bulk heterojunction architecture could be superseded by either single material photovoltaics or sequentially deposited heterojunctions, and the attributes of both are considered. While several important challenges still lie ahead for organic photovoltaics, their future is, indeed, bright.

Mapping the energy level alignment at donor/acceptor interfaces in non-fullerene organic solar cells

Energy level alignment (ELA) at donor (D) -acceptor (A) heterojunctions is essential for understanding the charge generation and recombination process in organic photovoltaic devices. However, the ELA at the D-A interfaces is largely underdetermined, resulting in debates on the fundamental operating mechanisms of high-efficiency non-fullerene organic solar cells. Here, we systematically investigate ELA and its depth-dependent variation of a range of donor/non-fullerene-acceptor interfaces by fabricating and characterizing D-A quasi bilayers and planar bilayers. In contrast to previous assumptions, we observe significant vacuum level (VL) shifts existing at the D-A interfaces, which are demonstrated to be abrupt, extending over only 1–2 layers at the heterojunctions, and are attributed to interface dipoles induced by D-A electrostatic potential differences. The VL shifts result in reduced interfacial energetic offsets and increased charge transfer (CT) state energies which reconcile the conflicting observations of large energy level offsets inferred from neat films and large CT energies of donor - non-fullerene-acceptor systems.

Energy level alignment (ELA) at donor-acceptor heterojunctions is of vital importance yet largely undetermined in organic solar cells. Here, authors determine the heterojunction ELA with (mono) layer-by-layer precision to understand the co-existence of efficient charge.

Charge-Separation and Charge-Recombination Rate Constants in a Donor-Acceptor Buckybowl-Based Supramolecular Complex: Multistate and Solvent Effects

The kinetics of the nonradiative photoinduced processes (charge-separation and charge-recombination) experimented in solution by a supramolecular complex formed by an electron-donating bowl-shaped truxene-tetrathiafulvalene (truxTTF) derivative and an electron-accepting fullerene fragment (hemifullerene, C30H12) has been theoretically investigated. The truxTTF·C30H12 heterodimer shows a complex decay mechanism after photoexcitation with the participation of several low-lying excited states of different nature (local and charge-transfer excitations) all close in energy. In this scenario, the absolute rate constants for all of the plausible charge-separation (CS) and charge-recombination (CR) channels have been successfully estimated using the Marcus-Levich-Jortner (MLJ) rate expression, electronic structure calculations, and a multistate diabatization method. The outcomes suggest that for a reasonable estimate of the CS and CR rate constants, it is necessary to include the following: (i) optimally tuned long-range (LC) corrected density functionals, to predict a correct energy ordering of the low-lying excited states; (ii) multistate effects, to account for the electronic couplings; and (iii) environmental solvent effects, to provide a proper stabilization of the charge-transfer excited states and accurate external reorganization energies. The predicted rate constants have been incorporated in a simple but insightful kinetic model that allows estimating global CS and CR rate constants in line with the most generalized three-state model used for the CS and CR processes. The values computed for the global CS and CR rates of the donor-acceptor truxTTF·C30H12 supramolecular complex are found to be in good agreement with the experimental values.

Free Charge Carriers in Homo-Sorted π-Stacks of Donor-Acceptor Conjugates

Inspired by the high photoconversion efficiency observed in natural light-harvesting systems, the hierarchical organization of molecular building blocks has gained impetus in the past few decades. Particularly, the molecular arrangement and packing in the active layer of organic solar cells (OSCs) have garnered significant attention due to the decisive role of the nature of donor/acceptor (D/A) heterojunctions in charge carrier generation and ultimately the power conversion efficiency. This review focuses on the recent developments in emergent optoelectronic properties exhibited by self-sorted donor-on-donor/acceptor-on-acceptor arrangement of covalently linked D-A systems, highlighting the ultrafast excited state dynamics of charge transfer and transport. Segregated organization of donors and acceptors promotes the delocalization of photoinduced charges among the stacks, engendering an enhanced charge separation lifetime and percolation pathways with ambipolar conductivity and charge carrier yield. Covalently linking donors and acceptors ensure a sufficient D-A interface and interchromophoric electronic coupling as required for faster charge separation while providing better control over their supramolecular assemblies. The design strategies to attain D-A conjugate assemblies with optimal charge carrier generation efficiency, the scope of their application compared to state-of-the-art OSCs, current challenges, and future opportunities are discussed in the review. An integrated overview of rational design approaches derived from the comprehension of underlying photoinduced processes can pave the way toward superior optoelectronic devices and bring in new possibilities to the avenue of functional supramolecular architectures.

Effect of static external electric field on bulk and interfaces in organic solar cell systems: A density-functional-theory-based study

In this work, a detailed comparison of optical and electronic properties in bulk and interfaces of well-known organic semiconductor systems in presence of an external electric field is reported. We have used density functional theory (DFT) to model organic solar cell systems. The study promotes a deeper understanding of the connection between the chemical structures and the optical and electronic properties in the well-known organic solar cell systems based on thiophene and fullerene polymers. We have performed a vibration-mode analysis by simulating Raman spectra in presence of external electric fields. Time-dependent DFT has been used to investigate the effect of an external electric field on excited state properties. The charge-transfer rate controlled by the external electric field has been quantitatively extracted using the simulated excited state dipole moment, Gibbs free energy, and Marcus theory. Our results provide a detailed characterization of the effect of the external electric field on the neat polymers (bulk) and on the donor-acceptor heterojunctions (interfaces) in organic solar cell systems. This theoretical approach not only helps to understand the effect of an external field on bulk and interfaces in organic semiconductors, but it also supports the design of novel devices.

Intrinsic photogeneration of long-lived charges in a donor-orthogonal acceptor conjugated polymer

Efficient charge photogeneration in conjugated polymers typically requires the presence of a second component to act as electron acceptor. Here, we report a novel low band-gap conjugated polymer with a donor/orthogonal acceptor motif: poly-2,6-(4,4-dihexadecyl-4H-cyclopenta [2,1-b:3,4-b']dithiophene)-alt-2,6-spiro [cyclopenta[2,1-b:3,4-b']dithiophene-4,9'-fluorene]-2',7'-dicarbonitrile, referred to as PCPDT-sFCN. The role of the orthogonal acceptor is to spatially isolate the LUMO from the HOMO, allowing for negligible exchange energy between electrons in these orbitals and minimising the energy gap between singlet and triplet charge transfer states. We employ ultrafast and microsecond transient absorption spectroscopy to demonstrate that, even in the absence of a separate electron acceptor, PCPDT-sFCN shows efficient charge photogeneration in both pristine solution and film. This efficient charge generation is a result of an isoenergetic singlet/triplet charge transfer state equilibrium acting as a reservoir for charge carrier formation. Furthermore, clear evidence of enhanced triplet populations, which form in less than 1 ps, is observed. Using group theory, we show that this ultrafast triplet formation is due to highly efficient, quantum mechanically allowed intersystem crossing between the bright, initially photoexcited local singlet state and the triplet charge transfer state. Remarkably, the free charges that form via the charge transfer state are extraordinarily long-lived with millisecond lifetimes, possibly due to the stabilisation imparted by the spatial separation of PCPDT-sFCN's donor and orthogonal acceptor motifs. The efficient generation of long-lived charge carriers in a pristine polymer paves the way for single-material applications such as organic photovoltaics and photodetectors.

Intrinsic efficiency limits in low-bandgap non-fullerene acceptor organic solar cells

In bulk heterojunction (BHJ) organic solar cells (OSCs) both the electron affinity (EA) and ionization energy (IE) offsets at the donor-acceptor interface should equally control exciton dissociation. Here, we demonstrate that in low-bandgap non-fullerene acceptor (NFA) BHJs ultrafast donor-to-acceptor energy transfer precedes hole transfer from the acceptor to the donor and thus renders the EA offset virtually unimportant. Moreover, sizeable bulk IE offsets of about 0.5 eV are needed for efficient charge transfer and high internal quantum efficiencies, since energy level bending at the donor-NFA interface caused by the acceptors' quadrupole moments prevents efficient exciton-to-charge-transfer state conversion at low IE offsets. The same bending, however, is the origin of the barrier-less charge transfer state to free charge conversion. Our results provide a comprehensive picture of the photophysics of NFA-based blends, and show that sizeable bulk IE offsets are essential to design efficient BHJ OSCs based on low-bandgap NFAs.

The role of spin in the degradation of organic photovoltaics

Stability is now a critical factor in the commercialization of organic photovoltaic (OPV) devices. Both extrinsic stability to oxygen and water and intrinsic stability to light and heat in inert conditions must be achieved. Triplet states are known to be problematic in both cases, leading to singlet oxygen production or fullerene dimerization. The latter is thought to proceed from unquenched singlet excitons that have undergone intersystem crossing (ISC). Instead, we show that in bulk heterojunction (BHJ) solar cells the photo-degradation of C60 via photo-oligomerization occurs primarily via back-hole transfer (BHT) from a charge-transfer state to a C60 excited triplet state. We demonstrate this to be the principal pathway from a combination of steady-state optoelectronic measurements, time-resolved electron paramagnetic resonance, and temperature-dependent transient absorption spectroscopy on model systems. BHT is a much more serious concern than ISC because it cannot be mitigated by improved exciton quenching, obtained for example by a finer BHJ morphology. As BHT is not specific to fullerenes, our results suggest that the role of electron and hole back transfer in the degradation of BHJs should also be carefully considered when designing stable OPV devices.

Inverted Region in Bimolecular Electron Transfer in Solution Enabled by Delocalization

Rate constants for bimolecular electron transfer (ET) increased with driving force, -ΔG°, reached a plateau, and then decreased in an inverted region. This rate data was described well by electron transfer theory subject to a diffusion-controlled limit. These were for ET from radical anions of polydecylthiophene (P3DT) to a series of acceptors in THF solution. When the donor was the smaller anion of quaterthiophene (T₄^•-) the inverted region was much less prominent and still less so for when the donor was the anion of bithiophene (T₂^•-). Description of the data using ET theory identifies smaller electronic couplings for the highly delocalized P3DT anions as enabling the inverted behavior: The presence of a Marcus inverted region is a consequence of delocalized electronic states. The results further imply that electronic couplings smaller than usually found for molecules in contact could boost efficiency of energy storage by electron transfer and identifies size-mismatch as an important concept in control of electronic couplings.

Buildup of Triplet-State Population in Operating TQ1:PC71BM Devices Does Not Limit Their Performance

Triplet generation in organic solar cells has been considered a major loss channel. Determining the density of the triplet-state population in an operating device is challenging. Here, we employ transient absorption (TA) spectroscopy on the quinoxaline-thiophene copolymer TQ1 blended with PC₇₁BM, quantify the transient charge and triplet-state densities, and parametrize their generation and recombination dynamics. The charge recombination parameters reproduce the experimentally measured current-voltage characteristics in charge carrier drift-diffusion simulations, and they yield the steady-state charge densities. We demonstrate that triplets are formed by both geminate and nongeminate recombination of charge carriers and decay primarily by triplet-triplet annihilation. Using the charge densities in the rate equations describing triplet-state dynamics, we find that triplet-state densities in devices are in the range of charge carrier densities. Despite this substantial triplet-state buildup, TQ1:PC₇₁BM devices exhibit only moderate geminate recombination and significantly reduced nongeminate charge recombination, with reduction factors between 10^-4 and 10^-3 compared to Langevin recombination.

Efficient light-harvesting, energy migration, and charge transfer by nanographene-based nonfullerene small-molecule acceptors exhibiting unusually long excited-state lifetime in the film state

Electron-acceptor small-molecules possessing a long exciton lifetime and a narrow energy band gap, opposing the energy gap law, are highly desirable for high-performance organic photovoltaics (OPVs) by realizing their efficient light-harvesting ability (LH), exciton diffusion (ED), and charge transfer (CT). Toward this goal, we designed an acceptor–donor–acceptor (A–D–A) type nonfullerene acceptor (NFA), TACIC, having an electron-donating, self-assembling two-dimensional (2D) nanographene unit, thienoazacoronene, at the center with electron-withdrawing groups at both ends. The TACIC film exhibited a narrow band gap (1.59 eV) with excellent LH. Surprisingly, the TACIC film showed an extremely long exciton lifetime (1.59 ns), suppressing undesirable nonradiative decay by its unique self-assembling behavior. When combined with a conjugated polymer donor, PBDB-T, slow ED and CT were observed (60 ps) with the excitation of TACIC owing to the large TACIC domain sizes. Nevertheless, the unusually high efficiencies of ED and CT (96% in total) were achieved by the long TACIC exciton lifetime. Additionally, unusual energy transfer (EnT) from the excited PBDB-T to TACIC was seen, demonstrating its dual LH role. The OPV device with PBDB-T and TACIC showed a high incident photon-to-current efficiency (IPCE) exceeding 70% at up to 710 nm and a power conversion efficiency of ∼10%. This result will open up avenues for a rational strategy of OPVs where LH, ED, and CT from the acceptor side as well as LH, EnT, ED, and CT from the donor side can be better designed by using 2D nanographene as a promising building block for high-performance A–D–A type NFAs.

A nonfullerene acceptor, TACIC, showed efficient light-harvesting, exciton diffusion, and charge transfer.

Open-Circuit Voltage of Organic Photovoltaics: A Time-Dependent and Unrestricted DFT Study in a P3HT/PCBM Complex

Solar cells based on blends of poly(3-hexylthiophene) and [6,6]-phenyl-C61-butyric acid methyl ester, P3HT/PCMB, constitute one of the most efficient polymer photovoltaic cell types. One of the main factors that determine the efficiency of the solar cells is the open-circuit voltage, V_OC. In this work, we provide an analysis of the parameters affecting the V_OC in a P3HT/PCBM complex. Electronic transitions, excited states, and electron transfer parameters are evaluated under the classical Marcus formalism via the time-dependent and unrestricted CAM-B3LYP/6-31G* methods. The charge-recombination driving force is found to mainly affect the charge-recombination rate constant and, in turn, V_OC. Even though other parameters also determine the value of V_OC like density of states, dimensions of the cell, and microstructure of the donor/acceptor interface, the current work highlights the understanding attained by modeling charge-transfer parameters. The analysis reported here encourage further quantum-chemical investigations in organic photovoltaics with the aim of estimating and improving V_OC, such that more efficient organic solar cells may be predicted.

Photoexcitation-induced local phonon spectra and local hot excitons in polymer solar cells

In this article, based on nonadiabatic molecular dynamics with electronic transitions, the elaborate ultrafast process of hot excitons in conjugated polymer solar cells is revealed. When an external optical beam/pulse with the intensity of 30 µJ/cm^-2 is utilized to excite a conjugated polymer, just within only 50 fs, the electronic transition not only redistributes the electron population in the original molecular orbital, but also starts to localize the electron cloud of excited states and to distort the alternating bonds in the polymer chain. Up to 300 fs, the lattice distortion has been stabilized. During the formation of hot excitons, the prominent self-trapping effect of conjugated polymer triggers the occurrence of local infrared active phonon modes, with five peaks in the phonon spectrum as the hot excitons relax. The characteristic phonon spectrum and infrared modes hence form the fingerprint of the hot excitons of a conjugated polymer, which are readily distinguished from other excitation states in the polymer.

Insights into ultrafast charge-pair dynamics in P3HT:PCBM devices under the influence of static electric fields

Polymer-fullerene blends based on poly(3-hexylthiophene-2,5-diyl) (P3HT) and phenyl-C₆₁-butyric-acid methyl ester (PCBM) have been extensively studied as promising bulk heterojunction materials for organic semiconductor devices with improved performance. In these donor–acceptor systems where the bulk morphology plays a crucial role, the generation and subsequent decay mechanisms of photoexcitation species are still not completely understood. In this work, we use femtosecond transient absorption spectroscopy to investigate P3HT:PCBM diodes under the influence of applied static electric fields in comparison to P3HT:PCBM thin films. At the same time, we try to present a detailed overview about work already done on these donor–acceptor systems. The excited state dynamics obtained at 638 nm from P3HT:PCBM thin films are found to be similar to those observed earlier in neat P3HT films, while those obtained in the P3HT:PCBM devices are affected by field-induced exciton dissociation, resulting not only in comparatively slower decay dynamics, but also in bimolecular deactivation processes. External electric fields are expected to enhance charge generation in the investigated P3HT:PCBM devices by dissociating excitons and loosely bound intermediate species like polaron pairs (PPs) and charge transfer (CT) excitons, which can already dissociate only due to the intrinsic fields at the donor–acceptor interfaces. Our results clearly establish the formation of PP-like transient species different from CT excitons in the P3HT:PCBM devices as a result of a field-induced diffusion-controlled exciton dissociation process. We find that the loosely bound transient species formed in this way also are reduced in part via a bimolecular annihilation process resulting in charge loss in typical donor–acceptor P3HT:PCBM bulk heterojunction semiconductor devices, which is a rather interesting finding important for a better understanding of the performance of these devices.

Electric field effects in P3HT:PCBM solar cell result in polaron-pair-like secondary photoexcitation species showing slower and bimolecular decay characteristics.

Exciton dissociation and charge separation at donor–acceptor interfaces from quantum-classical dynamics simulations

Nonadiabatic dynamics simulations based on the quantum-classical Liouville equation are employed to study the real-time dynamics of exciton dissociation and charge separation at a model donor–acceptor interface.

Impact of the donor polymer on recombination via triplet excitons in a fullerene-free organic solar cell

The greater chemical tunability of non-fullerene acceptors enables fine-tuning of the donor-acceptor energy level offsets, a promising strategy towards increasing the open-circuit voltage in organic solar cells. Unfortunately, this approach could open an additional recombination channel for the charge-transfer (CT) state via a lower-lying donor or acceptor triplet level. In this work we investigate such electron and hole back-transfer mechanisms in fullerene-free solar cells incorporating the novel molecular acceptor 2,4-diCN-Ph-DTTzTz. The transition to the low-driving force regime is studied by comparing blends with well-established donor polymers P3HT and MDMO-PPV, which allows for variation of the energetic offsets at the donor-acceptor interface. Combining various optical spectroscopic techniques, the CT process and subsequent triplet formation are systematically investigated. Although both back-transfer mechanisms are found to be energetically feasible in both blends, markedly different triplet-mediated recombination processes are observed for the two systems. The kinetic suppression of electron back-transfer in the blend with P3HT suggests that energy losses due to triplet formation on the polymer can be avoided, regardless of favorable energetic alignment.

Tailoring optical properties and stimulated emission in nanostructured polythiophene

Polythiophenes are the most widely utilized semiconducting polymers in organic electronics, but they are scarcely exploited in photonics due to their high photo-induced absorption caused by interchain polaron pairs, which prevents the establishment of a window of net optical gain. Here we study the photophysics of poly(3-hexylthiophene) configured with different degrees of supramolecular ordering, spin-coated thin films and templated nanowires, and find marked differences in their optical properties. Transient absorption measurements evidence a partially-polarized stimulated emission band in the nanowire samples, in contrast with the photo-induced absorption band observed in spin-coated thin films. In combination with theoretical modeling, our experimental results reveal the origin of the primary photoexcitations dominating the dynamics for different supramolecular ordering, with singlet excitons in the nanostructured samples superseding the presence of polaron pairs, which are present in the disordered films. Our approach demonstrates a viable strategy to direct optical properties through structural control, and the observation of optical gain opens the possibility to the use of polythiophene nanostructures as building blocks of organic optical amplifiers and active photonic devices.

Large Excited-State Conformational Displacements Expedite Triplet Formation in a Small Conjugated Oligomer

Intersystem crossing in conjugated organic molecules is most conveniently viewed from pure electronic perspectives; yet, vibrational displacements may often drive these transitions. We investigate an alkyl-substituted thienylene-vinylene dimer (dTV) displaying efficient triplet formation. Steady-state electronic and Raman spectra display large Stokes shifts (∼4000 cm^-1) involving high-frequency skeletal symmetric stretching modes (∼900-1600 cm^-1) in addition to large displacements of low-frequency torsional motions (∼300-340 cm^-1). Transient absorption spectroscopy reveals the emergence of distorted singlet (S₁) and triplet signatures following initial vibrational relaxation dynamics that dominate spectral dynamics on time scales > 100 ps, with the latter persisting on time scales up to ca. 7 μs. Potential energy surfaces calculated along the dominant displaced out-of-plane torsional mode reveal shallow energy barriers for entering the triplet manifold from S₁. We propose that dTV is a good model system for understanding vibrational contributions to intersystem crossing events in related polymer systems.

Spectroscopic Investigation of the Effect of Microstructure and Energetic Offset on the Nature of Interfacial Charge Transfer States in Polymer: Fullerene Blends

Despite performance improvements of organic photovoltaics, the mechanism of photoinduced electron–hole separation at organic donor–acceptor interfaces remains poorly understood. Inconclusive experimental and theoretical results have produced contradictory models for electron–hole separation in which the role of interfacial charge-transfer (CT) states is unclear, with one model identifying them as limiting separation and another as readily dissociating. Here, polymer–fullerene blends with contrasting photocurrent properties and enthalpic offsets driving separation were studied. By modifying composition, film structures were varied from consisting of molecularly mixed polymer–fullerene domains to consisting of both molecularly mixed and fullerene domains. Transient absorption spectroscopy revealed that CT state dissociation generating separated electron–hole pairs is only efficient in the high energy offset blend with fullerene domains. In all other blends (with low offset or predominantly molecularly mixed domains), nanosecond geminate electron–hole recombination is observed revealing the importance of spatially localized electron–hole pairs (bound CT states) in the electron–hole dynamics. A two-dimensional lattice exciton model was used to simulate the excited state spectrum of a model system as a function of microstructure and energy offset. The results could reproduce the main features of experimental electroluminescence spectra indicating that electron–hole pairs become less bound and more spatially separated upon increasing energy offset and fullerene domain density. Differences between electroluminescence and photoluminescence spectra could be explained by CT photoluminescence being dominated by more-bound states, reflecting geminate recombination processes, while CT electroluminescence preferentially probes less-bound CT states that escape geminate recombination. These results suggest that apparently contradictory studies on electron–hole separation can be explained by the presence of both bound and unbound CT states in the same film, as a result of a range of interface structures.

Energy-Gap Law for Photocurrent Generation in Fullerene-Based Organic Solar Cells: The Case of Low-Donor-Content Blends

The involvement of charge-transfer (CT) states in the photogeneration and recombination of charge carriers has been an important focus of study within the organic photovoltaic community. In this work, we investigate the molecular factors determining the mechanism of photocurrent generation in low-donor-content organic solar cells, where the active layer is composed of vacuum-deposited C₆₀ and small amounts of organic donor molecules. We find a pronounced decline of all photovoltaic parameters with decreasing CT state energy. Using a combination of steady-state photocurrent measurements and time-delayed collection field experiments, we demonstrate that the power conversion efficiency, and more specifically, the fill factor of these devices, is mainly determined by the bias dependence of photocurrent generation. By combining these findings with the results from ultrafast transient absorption spectroscopy, we show that blends with small CT energies perform poorly because of an increased nonradiative CT state decay rate and that this decay obeys an energy-gap law. Our work challenges the common view that a large energy offset at the heterojunction and/or the presence of fullerene clusters guarantee efficient CT dissociation and rather indicates that charge generation benefits from high CT state energies through a slower decay to the ground state.

Direct Observation of Structure and Dynamics of Photogenerated Charge Carriers in Poly(3-hexylthiophene) Films by Femtosecond Time-Resolved Near-IR Inverse Raman Spectroscopy

The initial charge separation process of conjugated polymers is one of the key factors for understanding their conductivity. The structure of photogenerated transients in conjugated polymers can be observed by resonance Raman spectroscopy in the near-IR region because they exhibit characteristic low-energy transitions. Here, we investigate the structure and dynamics of photogenerated transients in a regioregular poly(3-hexylthiophene) (P3HT):[6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM) blend film, as well as in a pristine P3HT film, using femtosecond time-resolved resonance inverse Raman spectroscopy in the near-IR region. The transient inverse Raman spectrum of the pristine P3HT film at 50 ps suggests coexistence of neutral and charged excitations, whereas that of the P3HT:PCBM blend film at 50 ps suggests formation of positive polarons with a different structure from those in an FeCl₃-doped P3HT film. Time-resolved near-IR inverse Raman spectra of the blend film clearly show the absence of charge separation between P3HT and PCBM within the instrument response time of our spectrometer, while they indicate two independent pathways of the polaron formation with time constants of 0.3 and 10 ps.

Ultrafast hole transfer mediated by polaron pairs in all-polymer photovoltaic blends

The charge separation yield at a bulk heterojunction sets the upper efficiency limit of an organic solar cell. Ultrafast charge transfer processes in polymer/fullerene blends have been intensively studied but much less is known about these processes in all-polymer systems. Here, we show that interfacial charge separation can occur through a polaron pair-derived hole transfer process in all-polymer photovoltaic blends, which is a fundamentally different mechanism compared to the exciton-dominated pathway in the polymer/fullerene blends. By utilizing ultrafast optical measurements, we have clearly identified an ultrafast hole transfer process with a lifetime of about 3 ps mediated by photo-excited polaron pairs which has a markedly high quantum efficiency of about 97%. Spectroscopic data show that excitons act as spectators during the efficient hole transfer process. Our findings suggest an alternative route to improve the efficiency of all-polymer solar devices by manipulating polaron pairs.

All-polymer solar cells have shown high efficiencies but the ultrafast charge transfer processes are less known. Here Wang et al. show that polaron pairs play vital role facilitating the hole transfer, which is quite different from the exciton dominated pathway in polymer-fullerene blends.

Solvent-dependent photophysics of a red-shifted, biocompatible coumarin photocage

A novel coumarin photocage with long-wavelength and high photolysis quantum yield shows solvent dependent photolysis.

Ultrafast transient absorption spectroscopy of doped P3HT films: distinguishing free and trapped polarons

It is generally presumed that the vast majority of carriers created by chemical doping of semiconducting polymer films are coulombically trapped by the counteranion, with only a small fraction that are free and responsible for the increased conductivity essential for organic electronic applications. At higher doping levels, it is also possible for bipolarons to form, which are expected to be less conductive than single polarons. Unfortunately, there is no simple way to distinguish free polarons, trapped polarons and bipolarons using steady-state spectroscopy. Thus, in this work, we use ultrafast transient absorption spectroscopy to study the dynamics of polarons in 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TNCQ)-doped films of poly(3-hexylthiophene-2,5-diyl) (P3HT) as a function of dopant concentration and excitation wavelength. When exciting on the red side of the polaron P1 transition, our transient absorption spectra and kinetics match well with what is expected for free 2-D-delocalized polarons; the measurements are not consistent with a recent theory of doped conjugated polymer electronic structure that suggests that the half-filled state lies deeper in the conduction band rather than in the bandgap. As we tune the excitation wavelength to the blue, our measurements reveal an increasing amount of slower transient kinetics that are consistent with the presence of coulombically-trapped polarons rather than bipolarons. Taking advantage of their distinct ultrafast relaxation kinetics as a type of action spectroscopy, we are able to extract the steady-state absorption spectra of free and trapped polarons as a function of dopant concentration. By comparing the results to theoretical models, we determine that in F4TCNQ-doped P3HT films, trapped polarons sit ∼0.4 nm away from the anion while free polarons reside between 0.7 and 0.9 nm from the counteranion. Perhaps counterintuitively, the ratio of trapped to free polarons increases at higher doping levels, an observation that is consistent with a plateau in the concentration-dependent conductivity of F4TCNQ-doped P3HT films.

Understanding the loss mechanisms in high-performance solution-processed small molecule bulk heterojunction solar cells doped with a PFN impurity

A small amount of PFN, introduced as an impurity, can have a dramatic impact on the performance of small molecule-based BHJ solar cells.

Optimum driving energy for achieving balanced open-circuit voltage and short-circuit current density in organic bulk heterojunction solar cells

Organic bulk heterojunction solar cells generally suffer from a trade-off between the open circuit voltage (Voc) and the short circuit current density (Jsc) under a given donor/acceptor (D/A) interfacial energetic offset (or the so-called driving force). Here we theoretically investigate the optimum driving energy required for achieving the balanced Jsc and Voc simultaneously. To this end, the Jscversus the driving force ΔE curves are calculated under two different charge separation mechanisms by employing the drift-diffusion method. For the Marcus incoherent mechanism, the curve features a high plateau in a broad range of ΔE starting from 0.2 eV, which is due to the accumulation of undissociated excitons within their lifetime and signifies the possibility of obtaining a sizable Jsc under a ΔE value much smaller than the reorganization energy. After incorporating both the electron and hole transfer pathways into the device model, the calculated J-V curves are comparable to experimentally measured ones foractual blended systems of different driving forces. For the coherent mechanism, it is demonstrated that the maximum Jsc can also be achieved under the ΔE of 0.2 eV if a large proportion of the high-lying delocalized states are harvested through tuning the density of states for the charge transfer excitons to reduce the sub-gap states. This theoretical work revealed quantitatively the relationship between the interfacial energy offsets and device performance, and also provides some guidelines for identifying the macroscopic features of the actual charge separation mechanisms in bulk heterojunction solar cells.

Ultrafast Transient Absorption Spectra of Photoexcited YOYO-1 molecules call for additional investigations of their fluorescence quenching mechanism

In this report, we observed that YOYO-1 immobilized on a glass surface is much brighter when dried (quantum yield 16±4% in the ambient air) or in hexane than in water (quantum yield ~%).YOYO-1 is a typical cyanine dye that has a photo-isomerization reaction upon light illumination. In order to understand this quenching mechanism, we use femtosecond transient absorption spectroscopy to measure YOYO-1's electron dynamics after excitation directly. By deconvoluting the hot-ground-state absorption and the stimulated emission, the dynamics of electronic relaxation and balance are revealed. The results support the intermolecular charge transfer mechanism better than the intramolecular relaxation mechanism that has been widely believed before. We believe that the first step of the relaxation involves a Dexter charge transfer between the photo-excited YOYO-1 molecule and another guest molecule that is directly bound to the YOYO-1 giving two radicals with opposite signs of charges. The charges are recombined either directly between these two molecules, or both molecules start to rotate and separate from each other. Eventually, the two charges recombined non-radiatively via various pathways. These pathways are reflected on the complicated multi-exponential decay curves of YOYO-1 fluorescence lifetime measurements. This charge transfer mechanism suggests that (1) electrical insulation may help improve the quantum yield of YOYO-1 in polar solutions significantly and (2) a steric hindrance for the intramolecular rotation may have a less significant effect.

Revealing the Importance of Energetic and Entropic Contributions to the Driving Force for Charge Photogeneration

Despite significant recent progress, much about the mechanism for charge photogeneration in organic photovoltaics remains unknown. Here, we use conjugated block copolymers as model systems to examine the effects of energetic and entropic driving forces in organic donor-acceptor materials. The block copolymers are designed such that an electron donor block and an electron acceptor block are covalently linked, embedding a donor-acceptor interface within the molecular structure. This enables model studies in solution where processes occurring between one donor and one acceptor are examined. First, energy levels and dielectric constants that govern the driving force for charge transfer are systematically tuned and charge transfer within individual block copolymer chains is quantified. Results indicate that in isolated chains, a significant driving force of ∼0.3 eV is necessary to facilitate significant exciton dissociation to charge-transfer states. Next, block copolymers are cast into films, allowing for intermolecular interactions and charge delocalization over multiple chains. In the solid state, charge transfer is significantly enhanced relative to isolated block copolymer chains. Using Marcus Theory, we conclude that changes in the energetic driving force alone cannot explain the increased efficiency of exciton dissociation to charge-transfer states in the solid state. This implies that increasing the number of accessible states for charge transfer introduces an entropic driving force that can play an important role in the charge-generation mechanism of organic materials, particularly in systems where the excited state energy level is close to that of the charge-transfer state.

Role of Disorder in the Extent of Interchain Delocalization and Polaron Generation in Polythiophene Crystalline Domains

To understand how disorder within conjugated polymer aggregates influences the polaron generation process, we investigated poly(3-hexylthiophene) (P3HT) and a congeneric random copolymer incorporating 33 mol % substituent-free thiophene units (RP33). Steady-state absorption and fluorescence spectra showed that increasing the intrachain torsional disorder in aggregates increases the energy and breadth of the density of states (DOS). By extracting polaron dynamics in the transient absorption spectra, we found that an activation energy barrier of 0.05 eV is imposed on the charge separation process in P3HT, whereas that in RP33 is essentially barrierless. We also found that a significant amount of excitons in P3HT are deactivated by traps, while no trapped excitons are generated in RP33. This efficient polaron generation in RP33 was attributed to the excess energy and enhanced interchain delocalization of precursor states provided by the intrachain torsional disorder and the close-packing structure in the absence of hexyl substituents.