The role of the second coordination sphere of [Ni(PCy2NBz2)2](BF4)2 in reversible carbon monoxide binding

Experimental Electrochemical Potentials of Nickel Complexes

Nickel-catalyzed cross-coupling and photoredox catalytic reactions has found widespread utilities in organic synthesis. Redox processes are key intermediate steps in many catalytic cycles. As a result, it is pertinent to measure and document the redox potentials of various nickel species as precatalysts, catalysts, and intermediates. The redox potentials of a transition-metal complex are governed by its oxidation state, ligand, and the solvent environment. This article tabulates experimentally measured redox potentials of nickel complexes supported on common ligands under various conditions. This review article serves as a versatile tool to help synthetic organic and organometallic chemists evaluate the feasibility and kinetics of redox events occurring at the nickel center, when designing catalytic reactions and preparing nickel complexes.

1 Introduction

1.1 Scope

1.2 Measurement of Formal Redox Potentials

1.3 Redox Potentials in Nonaqueous Solution

2 Redox Potentials of Nickel Complexes

2.1 Redox Potentials of (Phosphine)Ni Complexes

2.2 Redox Potentials of (Nitrogen)Ni Complexes

2.3 Redox Potentials of (NHC)Ni Complexes

Selective Transformation of Nickel-Bound Formate to CO or C-C Coupling Products Triggered by Deprotonation and Steered by Alkali-Metal Ions

The complexes [LtBu Ni(OCO-κ2 O,C)]M3 [N(SiMe3 )2 ]2 (M=Li, Na, K), synthesized by deprotonation of a nickel formate complex [LtBu NiOOCH] with the corresponding amides M[N(SiMe3 )2 ], feature a NiII -CO2 2- core surrounded by Lewis-acidic cations (M+ ) and the influence of the latter on the behavior and reactivity was studied. The results point to a decrease of CO2 activation within the series Li, Na, and K, which is also reflected in the reactivity with Me3 SiOTf leading to the liberation of CO and formation of a Ni-OSiMe3 complex. Furthermore, in case of K+ , the {[K3 [N(SiMe3 )2 ]2 }+ shell around the Ni-CO2 2- entity was shown to have a large impact on its stabilization and behavior. If the number of K[N(SiMe3 )2 ] equivalents used in the reaction with [LtBu NiOOCH] is decreased from 3 to 0.5, the deprotonated part of the precursor enters a complex reaction sequence with formation of [LtBu NiI (μ-OOCH)NiI LtBu ]K and [LtBu Ni(C2 O4 )NiLtBu ]. The same reaction at higher concentrations additionally led to the formation of a unique hexanuclear NiII complex containing both oxalate and mesoxalate ([O2 C-CO2 -CO2 ]4- ) ligands.

Biochemical and artificial pathways for the reduction of carbon dioxide, nitrite and the competing proton reduction: effect of 2nd sphere interactions in catalysis

Reduction of oxides and oxoanions of carbon and nitrogen are of great contemporary importance as they are crucial for a sustainable environment.

Biosynthetic Approaches towards the Design of Artificial Hydrogen-Evolution Catalysts

Hydrogen is a clean and sustainable form of fuel that can minimize our heavy dependence on fossil fuels as the primary energy source. The need of finding greener ways to generate H₂ gas has ignited interest in the research community to synthesize catalysts that can produce H₂ by the reduction of H⁺ . The natural H₂ producing enzymes hydrogenases have served as an inspiration to produce catalytic metal centers akin to these native enzymes. In this article we describe recent advances in the design of a unique class of artificial hydrogen evolving catalysts that combine the features of the active site metal(s) surrounded by a polypeptide component. The examples of these biosynthetic catalysts discussed here include i) assemblies of synthetic cofactors with native proteins; ii) peptide-appended synthetic complexes; iii) substitution of native cofactors with non-native cofactors; iv) metal substitution from rubredoxin; and v) a reengineered Cu storage protein into a Ni binding protein. Aspects of key design considerations in the construction of these artificial biocatalysts and insights gained into their chemical reactivity are discussed.

Graphite Conjugation Eliminates Redox Intermediates in Molecular Electrocatalysis

The efficient interconversion of electrical and chemical energy requires the intimate coupling of electrons and small-molecule substrates at catalyst active sites. In molecular electrocatalysis, the molecule acts as a redox mediator which typically undergoes oxidation or reduction in a separate step from substrate activation. These mediated pathways introduce a high-energy intermediate, cap the driving force for substrate activation at the reduction potential of the molecule, and impede access to high rates at low overpotentials. Here we show that electronically coupling a molecular hydrogen evolution catalyst to a graphitic electrode eliminates stepwise pathways and forces concerted electron transfer and proton binding. Electrochemical and X-ray absorption spectroscopy data establish that hydrogen evolution catalysis at the graphite-conjugated Rh molecule proceeds without first reducing the metal center. These results have broad implications for the molecular-level design of energy conversion catalysts.

Graphite-Conjugated Acids Reveal a Molecular Framework for Proton-Coupled Electron Transfer at Electrode Surfaces

Proton-coupled electron-transfer (PCET) steps play a key role in energy conversion reactions. Molecular PCET reactions are well-described by "square schemes" in which the overall thermochemistry of the reaction is broken into its constituent proton-transfer and electron-transfer components. Although this description has been essential for understanding molecular PCET, no such framework exists for PCET reactions that take place at electrode surfaces. Herein, we develop a molecular square scheme framework for interfacial PCET by investigating the electrochemistry of molecularly well-defined acid/base sites conjugated to graphitic electrodes. Using cyclic voltammetry, we first demonstrate that, irrespective of the redox properties of the corresponding molecular analogue, proton transfer to graphite-conjugated acid/base sites is coupled to electron transfer. We then show that the thermochemistry of surface PCET events can be described by the pK _a of the molecular analogue and the potential of zero free charge (zero-field reduction potential) of the electrode. This work provides a general framework for analyzing and predicting the thermochemistry of interfacial PCET reactions.

Evaluation of attractive interactions in the second coordination sphere of iron complexes containing pendant amines

The ability of different ligands to attract a pendant amine is studied in a series of iron complexes.

Donor-Dependent Kinetics of Interfacial Proton-Coupled Electron Transfer

The effect of the proton donor on the kinetics of interfacial concerted proton-electron transfer (CPET) to polycrystalline Au was probed indirectly by studying the rate of hydrogen evolution from trialkylammonium donors with different steric profiles, but the same pKa. Detailed kinetic studies point to a mechanism for HER catalysis that involves rate-limiting CPET from the proton donor to the electrode surface, allowing this catalytic reaction to serve as a proxy for the rate of interfacial CPET. In acetonitrile electrolyte, triethylammonium (TEAH(+)) displays up to 20-fold faster CPET kinetics than diisopropylethylammonium (DIPEAH(+)) at all measured potentials. In aqueous electrolyte, this steric constraint is largely lifted, suggesting a key role for water in mediating interfacial CPET. In acetonitrile, TEAH(+) also displays a much larger transfer coefficient (β = 0.7) than DIPEAH(+) (β = 0.4), and TEAH(+) displays a potential-dependent H/D kinetic isotope effect that is not observed for DIPEAH(+). These results demonstrate that proton donor structure strongly impacts the free energy landscape for CPET to extended solid surfaces and highlight the crucial role of the proton donor in the kinetics of electrocatalytic energy conversion reactions.

Diiron Azamonothiolates via Scission of Dithiadiazacyclooctanes by Iron Carbonyls

The reaction of Fe₃(CO)₁₂ with the dithiadiazacyclooctanes [SCH₂N(R)CH₂]₂ affords Fe₂[SCH₂N(Me)CH₂](CO)₆ (R = Me, Bn). The methyl derivative 1^Me was characterized crystallographically (Fe-Fe = 2.5702(5) Å). Its low symmetry is verified by variable temperature ¹³C NMR spectroscopy which revealed that the turnstile rotation of the S(CH₂)Fe(CO)₃ and S(NMe)Fe(CO)₃ centers are subject to very different energy barriers. Although 1^Me resists protonation, it readily undergoes substitution by tertiary phosphines, first at the S(CH₂)Fe(CO)₃ center, as verified crystallographically for Fe₂[SCH₂N(Me)CH₂](CO)₅(PPh₃). Substitution by the chelating diphosphine dppe (Ph₂PCH₂CH₂PPh₂) gave Fe₂[SCH₂N(Me)CH₂](CO)₄(dppe), resulting from substitution at both the S(CH₂)Fe(CO)₃ and S(NMe)Fe(CO)₃ sites.

Proton reduction by molecular catalysts in water under demanding atmospheres

The electrocatalytic proton reduction activity of a Ni bis(diphosphine) (NiP) and a cobaloxime (CoP) catalyst has been studied in water in the presence of the gaseous inhibitors O2 and CO. CoP shows an appreciable tolerance towards O2, but its activity suffers severely in the presence of CO. In contrast, NiP is strongly inhibited by O2, but produces H2 under high CO concentrations.

Reversible CO binding enables tunable CO/H₂ and CO/N₂ separations in metal-organic frameworks with exposed divalent metal cations

Six metal-organic frameworks of the M2(dobdc) (M = Mg, Mn, Fe, Co, Ni, Zn; dobdc(4-) = 2,5-dioxido-1,4-benzenedicarboxylate) structure type are demonstrated to bind carbon monoxide reversibly and at high capacity. Infrared spectra indicate that, upon coordination of CO to the divalent metal cations lining the pores within these frameworks, the C-O stretching frequency is blue-shifted, consistent with nonclassical metal-CO interactions. Structure determinations reveal M-CO distances ranging from 2.09(2) Å for M = Ni to 2.49(1) Å for M = Zn and M-C-O angles ranging from 161.2(7)° for M = Mg to 176.9(6)° for M = Fe. Electronic structure calculations employing density functional theory (DFT) resulted in good agreement with the trends apparent in the infrared spectra and crystal structures. These results represent the first crystallographically characterized magnesium and zinc carbonyl compounds and the first high-spin manganese(II), iron(II), cobalt(II), and nickel(II) carbonyl species. Adsorption isotherms indicate reversible adsorption, with capacities for the Fe, Co, and Ni frameworks approaching one CO per metal cation site at 1 bar, corresponding to loadings as high as 6.0 mmol/g and 157 cm(3)/cm(3). The six frameworks display (negative) isosteric heats of CO adsorption ranging from 52.7 to 27.2 kJ/mol along the series Ni > Co > Fe > Mg > Mn > Zn, following the Irving-Williams stability order. The reversible CO binding suggests that these frameworks may be of utility for the separation of CO from various industrial gas mixtures, including CO/H2 and CO/N2. Selectivities determined from gas adsorption isotherm data using ideal adsorbed solution theory (IAST) over a range of gas compositions at 1 bar and 298 K indicate that all six M2(dobdc) frameworks could potentially be used as solid adsorbents to replace current cryogenic distillation technologies, with the choice of M dictating adsorbent regeneration energy and the level of purity of the resulting gases.

A hydrogen-evolving Ni(P2N2)2 electrocatalyst covalently attached to a glassy carbon electrode: preparation, characterization, and catalysis. comparisons with the homogeneous analogue

A hydrogen-evolving homogeneous Ni(P2N2)2 electrocatalyst with peripheral ester groups has been covalently attached to a 1,2,3-triazolyllithium-terminated planar glassy carbon electrode surface. Coupling proceeds with both the Ni(0) and the Ni(II) complexes. X-ray photoemission spectra show excellent agreement between the Ni(0) coupling product and its parent complex, and voltammetry of the surface-confined system shows that a single species predominates with a surface density of 1.3 × 10(-10) mol cm(-2), approaching the value estimated for a densely packed monolayer. With the Ni(II) system, both photoemission and voltammetric data show speciation to unidentified products on coupling, and the surface density is 6.7 × 10(-11) mol cm(-2). The surface-confined Ni(0) complex is an electroctalyst for hydrogen evolution, showing the onset of catalytic current at the same potential as the soluble parent complex. Decomposition of the surface-confined species is observed in acidic acetonitrile. This is interpreted to reflect the lability of the Ni(II)-phosphine interaction and the basicity of the free phosphine and bears on concurrent efforts to implement surface-confined Ni(P2N2)2 complexes in electrochemical or photoelectrochemical devices.

Arginine-containing ligands enhance H₂ oxidation catalyst performance

Hydrogenase enzymes use Ni and Fe to oxidize H2 at high turnover frequencies (TOF) (up to 10,000 s(-1)) and low overpotentials (<100 mV). In comparison, the fastest reported synthetic electrocatalyst, [Ni(II)(P(Cy)2N(tBu)2)2](2+), oxidizes H2 at 60 s(-1) in MeCN under 1 atm H2 with an unoptimized overpotential of ca. 500 mV using triethylamine as a base. Here we show that a structured outer coordination sphere in a Ni electrocatalyst enhances H2 oxidation activity: [Ni(II)(P(Cy)2N(Arg)2)2](8+) (Arg=arginine) has a TOF of 210 s(-1) in water with high energy efficiency (180 mV overpotential) under 1 atm H2 , and 144,000 s(-1) (460 mV overpotential) under 133 atm H2. The complex is active from pH 0-14 and is faster at low pH, the most relevant condition for fuel cells. The arginine substituents increase TOF and may engage in an intramolecular guanidinium interaction that assists in H2 activation, while the COOH groups facilitate rapid proton movement. These results emphasize the critical role of features beyond the active site in achieving fast, efficient catalysis.

Structure–function study of tertiary amines as switchable polarity solvents

A series of tertiary amines have been screened for their function as switchable polarity solvents (SPS). The relative ratios of tertiary amine and carbonate species as well as maximum possible concentration were determined. A new form of SPS with an amine : carbonate ratio significantly greater than unity has been identified. The N,N-dimethyl-n-alkylamine structure has been identified as important to the function of an SPS.

Two pathways for electrocatalytic oxidation of hydrogen by a nickel bis(diphosphine) complex with pendant amines in the second coordination sphere

A nickel bis(diphosphine) complex containing pendant amines in the second coordination sphere, [Ni(P(Cy)2N(t-Bu)2)2](BF4)2 (P(Cy)2N(t-Bu)2 = 1,5-di(tert-butyl)-3,7-dicyclohexyl-1,5-diaza-3,7-diphosphacyclooctane), is an electrocatalyst for hydrogen oxidation. The addition of hydrogen to the Ni(II) complex gives three isomers of the doubly protonated Ni(0) complex [Ni(P(Cy)2N(t-Bu)2H)2](BF4)2. Using the pKa values and Ni(II/I) and Ni(I/0) redox potentials in a thermochemical cycle, the free energy of hydrogen addition to [Ni(P(Cy)2N(t-Bu)2)2](2+) was determined to be -7.9 kcal mol(-1). The catalytic rate observed in dry acetonitrile for the oxidation of H2 depends on base size, with larger bases (NEt3, t-BuNH2) resulting in much slower catalysis than n-BuNH2. The addition of water accelerates the rate of catalysis by facilitating deprotonation of the hydrogen addition product before oxidation, especially for the larger bases NEt3 and t-BuNH2. This catalytic pathway, where deprotonation occurs prior to oxidation, leads to an overpotential that is 0.38 V lower compared to the pathway where oxidation precedes proton movement. Under the optimal conditions of 1.0 atm H2 using n-BuNH2 as a base and with added water, a turnover frequency of 58 s(-1) is observed at 23 °C.

A modular, energy-based approach to the development of nickel containing molecular electrocatalysts for hydrogen production and oxidation

This review discusses the development of molecular electrocatalysts for H2 production and oxidation based on nickel. A modular approach is used in which the structure of the catalyst is divided into first, second, and outer coordination spheres. The first coordination sphere consists of the ligands bound directly to the metal center, and this coordination sphere can be used to control such factors as the presence or absence of vacant coordination sites, redox potentials, hydride donor abilities and other important thermodynamic parameters. The second coordination sphere includes functional groups such as pendent acids or bases that can interact with bound substrates such as H2 molecules and hydride ligands, but that do not form strong bonds with the metal center. These functional groups can play diverse roles such as assisting the heterolytic cleavage of H2, controlling intra- and intermolecular proton transfer reactions, and providing a physical pathway for coupling proton and electron transfer reactions. By controlling both the hydride donor ability of the catalysts using the first coordination sphere and the proton donor abilities of the functional groups in the second coordination sphere, catalysts can be designed that are biased toward H2 production, oxidation, or bidirectional (catalyzing both H2 oxidation and production). The outer coordination sphere is defined as that portion of the catalytic system that is beyond the second coordination sphere. This coordination sphere can assist in the delivery of protons and electrons to and from the catalytically active site, thereby adding another important avenue for controlling catalytic activity. Many features of these simple catalytic systems are good models for enzymes, and these simple systems provide insights into enzyme function and reactivity that may be difficult to probe in enzymes. This article is part of a Special Issue entitled: Metals in Bioenergetics and Biomimetics Systems.

Investigating the role of the outer-coordination sphere in [Ni(P(Ph)2N(Ph‑R)2)2]2+ hydrogenase mimics

A series of dipeptide substituted nickel complexes with the general formula, [Ni(P(Ph)(2)N(NNA-amino acid/ester)(2))(2)](BF(4))(2), have been synthesized and characterized (P(2)N(2) = 1,5-diaza-3,7-diphosphacyclooctane, and the dipeptide consists of the non-natural amino acid, 3-(4-aminophenyl)propionic acid (NNA), coupled to amino acid/esters = glutamic acid, alanine, lysine, and aspartic acid). Each of these complexes is an active electrocatalyst for H(2) production. The effects of the outer-coordination sphere on the catalytic activity for the production of H(2) were investigated; specifically, the impact of sterics, the ability of the side chain or backbone to protonate and the pK(a) values of the amino acid side chains were studied by varying the amino acids in the dipeptide. The catalytic rates of the different dipeptide substituted nickel complexes varied by over an order of magnitude. The amino acid derivatives display the fastest rates, while esterification of the terminal carboxylic acids and side chains resulted in a decrease in the catalytic rate by 50-70%, implicating a significant role of protonated sites in the outer-coordination sphere on catalytic activity. For both the amino acid and ester derivatives, the complexes with the largest substituents display the fastest rates, indicating that catalytic activity is not hindered by steric bulk. These studies demonstrate the significant contribution that the outer-coordination sphere can have in tuning the catalytic activity of small molecule hydrogenase mimics.

Incorporating peptides in the outer-coordination sphere of bioinspired electrocatalysts for hydrogen production

Four new cyclic 1,5-diaza-3,7-diphosphacyclooctane ligands have been prepared and used to synthesize [Ni(P(Ph)(2)N(R)(2))(2)](2+) complexes in which R is a mono- or dipeptide. These complexes represent a first step in the development of an outer-coordination sphere for this class of complexes that can mimic the outer-coordination sphere of the active sites of hydrogenase enzymes. Importantly, these complexes retain the electrocatalytic activity of the parent [Ni(P(Ph)(2)N(Ph)(2))(2)](2+) complex in an acetonitrile solution with turnover frequencies for hydrogen production ranging from 14 to 25 s(-1) in the presence of p-cyanoanilinium trifluoromethanesulfonate and from 135 to 1000 s(-1) in the presence of protonated dimethylformamide, with moderately low overpotentials, ∼0.3 V. The addition of small amounts of water results in rate increases of 2-7 times. Unlike the parent complex, these complexes demonstrate dynamic structural transformations in solution. These results establish a building block from which larger peptide scaffolding can be added to allow the [Ni(P(R)(2)N(R')(2))(2)](2+) molecular catalytic core to begin to mimic the multifunctional outer-coordination sphere of enzymes.