Biofunctionalization on alkylated silicon substrate surfaces via "click" chemistry

Grafting of Organophosphonic Acid Monolayers on Hydrogen-Terminated Silicon Surface and Secondary Functionalization in Supercritical Carbon Dioxide Media

The monolayer grafting on the oxide-free Si surface is challenging due to vulnerability of the surface against oxide formation in an ambient atmosphere. Most of the conventional studies focused on organic solvent-based chemistry and solvent and substrate interfaces, and residual solvents after the monolayer grafting play a key role in producing the highly stable monolayers. CO2 in its supercritical state (SCCO2) provides an elegant engineering solution for the problem faced as it can be used as inert processing environment and as carrier fluid for monolayer grafting taking up the role of organic solvents. In this work, monolayers of alkyl organophosphonic acids (OPAs) and functional OPAs were grafted on hydrogen-terminated oxide-free Si surfaces using the SCCO2 process. Grafted monolayers were physically and chemically characterized to verify the successful monolayer formation and determine the nature of the covalent binding configuration on the surface. To broaden the prospects of practical utility of the process and the OPA monolayer, the (3-bromopropyl)phosphonic acid (BPPA) monolayer was demonstrated to undergo secondary functionalization by terminal group substitution to convert the Br terminal group to the OH terminal group and secondary monolayer grafting to assemble 4-fluorothiophenol on top of the BPPA monolayer. The ability of monolayers to sustain secondary functionalization processing qualitatively hints toward ordered and stable monolayers of OPAs. The developed SCCO2 process in this work presents a single-step, green, and scalable method to graft the OPA monolayer on oxide-free Si which can employed in the future for monolayer doping, highly selective biochemical sensors, and targeted biological interactions.

Growing impact of sialic acid-containing glycans in future drug discovery

In nature, almost all cells are covered with a complex array of glycan chain namely sialic acids or nuraminic acids, a negatively charged nine carbon sugars which is considered for their great therapeutic importance since long back. Owing to its presence at the terminal end of lipid bilayer (commonly known as terminal sugars), the well-defined sialosides or sialoconjugates have served pivotal role on the cell surfaces and thus, the sialic acid-containing glycans can modulate and mediate a number of imperative cellular interactions. Understanding of the sialo-protein interaction and their roles in vertebrates in regard of normal physiology, pathological variance, and evolution has indeed a noteworthy journey in medicine. In this tutorial review, we present a concise overview about the structure, linkages in chemical diversity, biological significance followed by chemical and enzymatic modification/synthesis of sialic acid containing glycans. A more focus is attempted about the recent advances, opportunity, and more over growing impact of sialosides and sialoconjugates in future drug discovery and development.

Non-Ideal Cyclic Voltammetry of Redox Monolayers on Silicon Electrodes: Peak Splitting is Caused by Heterogeneous Photocurrents and Not by Molecular Disorder

Over the last three decades, research on redox-active monolayers has consolidated their importance as advanced functional material. For widespread monolayer systems, such as alkanethiols on gold, non-ideal multiple peaks in cyclic voltammetry are generally taken as indication of heterogeneous intermolecular interactions─namely, disorder in the monolayer. Our findings show that, contrary to metals, peak multiplicity of silicon photoelectrodes is not diagnostic of heterogeneous intermolecular microenvironments but is more likely caused by photocurrent being heterogeneous across the monolayer. This work is an important step toward understanding the cause of electrochemical non-idealities in semiconductor electrodes so that these can be prevented and the redox behavior of molecular monolayers, as photocatalytic systems, can be optimized.

Cu(I)-Catalyzed Click Chemistry in Glycoscience and Their Diverse Applications

Copper(I)-catalyzed 1,3-dipolar cycloaddition between organic azides and terminal alkynes, commonly known as CuAAC or click chemistry, has been identified as one of the most successful, versatile, reliable, and modular strategies for the rapid and regioselective construction of 1,4-disubstituted 1,2,3-triazoles as diversely functionalized molecules. Carbohydrates, an integral part of living cells, have several fascinating features, including their structural diversity, biocompatibility, bioavailability, hydrophilicity, and superior ADME properties with minimal toxicity, which support increased demand to explore them as versatile scaffolds for easy access to diverse glycohybrids and well-defined glycoconjugates for complete chemical, biochemical, and pharmacological investigations. This review highlights the successful development of CuAAC or click chemistry in emerging areas of glycoscience, including the synthesis of triazole appended carbohydrate-containing molecular architectures (mainly glycohybrids, glycoconjugates, glycopolymers, glycopeptides, glycoproteins, glycolipids, glycoclusters, and glycodendrimers through regioselective triazole forming modular and bio-orthogonal coupling protocols). It discusses the widespread applications of these glycoproducts as enzyme inhibitors in drug discovery and development, sensing, gelation, chelation, glycosylation, and catalysis. This review also covers the impact of click chemistry and provides future perspectives on its role in various emerging disciplines of science and technology.

Surface chemical reactions on self-assembled silane based monolayers

In this review, we aim to update our review "Chemical modification of self-assembled silane-based monolayers by surface reactions" which was published in 2010 and has developed into an important guiding tool for researchers working on the modification of solid substrate surface properties by chemical modification of silane-based self-assembled monolayers. Due to the rapid development of this field of research in the last decade, the utilization of chemical functionalities in self-assembled monolayers has been significantly improved and some new processes were introduced in chemical surface reactions for tailoring the properties of solid substrates. Thus, it is time to update the developments in the surface functionalization of silane-based molecules. Hence, after a short introduction on self-assembled monolayers, this review focuses on a series of chemical reactions, i.e., nucleophilic substitution, click chemistry, supramolecular modification, photochemical reaction, and other reactions, which have been applied for the modification of hydroxyl-terminated substrates, like silicon and glass, which have been reported during the last 10 years.

TEMPO driven thiol–ene reaction for the preparation of polymer functionalized silicon wafers

TEMPO driven thiol–ene reaction was utilized to prepare silicon (Si) wafers modified with a variety of polymer brushes, such as poly(N-isopropyl acrylamide), polystyrene, poly(isobornyl acrylate), poly(acrylic acid), and functionalized cysteine.

Immobilization of Ethynyl-π-Extended Electron Acceptors with Amino-Terminated SAMs by Catalyst-Free Click Reaction

Surface modification of SiO₂ using a catalyst-free quantitative reaction between an amine and an ethynyl-π-extended naphthalenediimide was investigated. A post-reaction method, in which the catalyst-free reaction was performed at the surface after the formation of amino-terminated self-assembled monolayers (SAMs), resulted in dense, uniform modification of the SiO₂ surface with the naphthalenediimide molecules. Both X-ray reflectivity and angle-resolved X-ray photoemission spectroscopy showed consistent results for the layer thickness and density. In contrast, a pre-reaction method, in which an amino-silane and the ethynyl-π-extended naphthalenediimide reacted first and then formed a SAM, afforded a sparse SAM on the SiO₂ surface, probably due to the steric hindrance of the naphthalenediimide moieties. The in situ decoration of the SiO₂ surface by a catalyst-free quantitative reaction offers a facile route for modifying surface properties with various π-conjugated molecules suitable for many applications.

Chemoenzymatic Synthesis of DSGb5 and Sialylated Globo-series Glycans

Sialic-acid-binding, immunoglobulin-type lectin-7 (Siglec-7) is present on the surface of natural killer cells. Siglec-7 shows preference for disialylated glycans, including α(2,8)-α(2,3)-disialic acids or internally branched α(2,6)-NeuAc, such as disialosylglobopentaose (DSGb5). Herein, DSGb5 was synthesized by a one-pot multiple enzyme method from Gb5 by α2,3-sialylation (with PmST1) followed by α2,6-sialylation (with Psp2,6ST) in 23 % overall yield. DSGb5 was also chemoenzymatically synthesized. The protection of the nonreducing-end galactose of Gb5 as 3,4-O-acetonide, 3,4-O-benzylidene, and 4,6-O-benzylidene derivatives provided DSGb5 in overall yields of 26 %, 12 %, and 19 %, respectively. Gb3, Gb4, and Gb5 were enzymatically sialylated to afford a range of globo-glycans. Surprisingly, DSGb5 shows a low affinity for Siglec-7 in a glycan microarray binding affinity assay. Among the synthesized globo-series glycans, α6α3DSGb4 shows the highest binding affinity for Siglec-7.

Coating of silicone with mannoside-PAMAM dendrimers to enhance formation of non-pathogenic Escherichia coli biofilms against colonization of uropathogens

Bacterial interference using non-pathogenic Escherichia coli 83972 is a novel strategy for preventing catheter-associated urinary tract infection (CAUTI). Crucial to the success of this strategy is to establish a high coverage and stable biofilm of the non-pathogenic bacteria on the catheter surface. However, this non-pathogenic strain is sluggish to form biofilms on silicone as the most widely used material for urinary catheters. We have addressed this issue by modifying the silicone catheter surfaces with mannosides that promote the biofilm formation, but the stability of the non-pathogenic biofilms challenged by uropathogens over long-term remains a concern. Herein, we report our study on the stability of the non-pathogenic biofilms grown on propynylphenyl mannoside-modified silicone. The result shows that 94% non-pathogenic bacteria were retained on the modified silicone under >0.5 Pa shear stress. After being challenged by three multidrug-resistant uropathogenic isolates in artificial urine for 11 days, large amounts (>4 × 10⁶ CFU cm^-2) of the non-pathogenic bacteria remained on the surfaces. These non-pathogenic biofilms reduced the colonization of the uropathogens by >3.2-log.

STATEMENT OF SIGNIFICANCE

In bacterial interference, the non-pathogenic Escherichia coli strains are sluggish to form biofilms on the catheter surfaces, due to rapid removal by urine flow. We have demonstrated a solution to this bottleneck by pre-functionalization of mannosides on the silicone surfaces to promote E. coli biofilm formation. A pre-conjugated high affinity propynylphenyl mannoside ligand tethered to the nanometric amino-terminated poly(amido amine) (PAMAM) dendrimer is used for binding to a major E. coli adhesin FimH. It greatly improves the efficiency for the catheter modification, the non-pathogenic biofilm coverage, as well as the (long-term) stability for prevention of uropathogen infections.

Direct Creation of Biopatterns via a Combination of Laser-Based Techniques and Click Chemistry

In this paper, we present the immobilization of thiol-modified aptamers on alkyne- or alkene-terminated silicon nitride surfaces by laser-induced click chemistry reactions. The aptamers are printed onto the surface by laser-induced forward transfer (LIFT), which also induces the covalent bonding of the aptamers by thiol-ene or thiol-yne reactions that occur upon UV irradiation of the thiol-modified aptamers with ns laser pulses. This combination of LIFT and laser-induced click chemistry allows the creation of high-resolution patterns without the need for masks. Whereas the click chemistry already takes place during the printing process (single-step process) by the laser pulse used for the printing process, further irradiation of the LIFT-printed aptamers by laser pulses (two-step process) leads to a further increase in the immobilization efficiency.

5,5′-Bistriazoles as axially chiral, multidentate ligands: synthesis, configurational stability and catalytic application of their scandium(iii) complexes

The design and development of 5,5′-bistriazoles featuring aminomethyl substituents is discussed.

TEMPO Monolayers on Si(100) Electrodes: Electrostatic Effects by the Electrolyte and Semiconductor Space-Charge on the Electroactivity of a Persistent Radical

This work demonstrates the effect of electrostatic interactions on the electroactivity of a persistent organic free radical. This was achieved by chemisorption of molecules of 4-azido-2,2,6,6-tetramethyl-1-piperdinyloxy (4-azido-TEMPO) onto monolayer-modified Si(100) electrodes using a two-step chemical procedure to preserve the open-shell state and hence the electroactivity of the nitroxide radical. Kinetic and thermodynamic parameters for the surface electrochemical reaction are investigated experimentally and analyzed with the aid of electrochemical digital simulations and quantum-chemical calculations of a theoretical model of the tethered TEMPO system. Interactions between the electrolyte anions and the TEMPO grafted on highly doped, i.e., metallic, electrodes can be tuned to predictably manipulate the oxidizing power of surface nitroxide/oxoammonium redox couple, hence showing the practical importance of the electrostatics on the electrolyte side of the radical monolayer. Conversely, for monolayers prepared on the poorly doped electrodes, the electrostatic interactions between the tethered TEMPO units and the semiconductor-side, i.e., space-charge, become dominant and result in drastic kinetic changes to the electroactivity of the radical monolayer as well as electrochemical nonidealities that can be explained as an increase in the self-interaction "a" parameter that leads to the Frumkin isotherm.

Cu-Catalyzed Click Reaction in Carbohydrate Chemistry

Cu(I)-catalyzed azide-alkyne 1,3-dipolar cycloaddition (CuAAC), popularly known as the "click reaction", serves as the most potent and highly dependable tool for facile construction of simple to complex architectures at the molecular level. Click-knitted threads of two exclusively different molecular entities have created some really interesting structures for more than 15 years with a broad spectrum of applicability, including in the fascinating fields of synthetic chemistry, medicinal science, biochemistry, pharmacology, material science, and catalysis. The unique properties of the carbohydrate moiety and the advantages of highly chemo- and regioselective click chemistry, such as mild reaction conditions, efficient performance with a wide range of solvents, and compatibility with different functionalities, together produce miraculous neoglycoconjugates and neoglycopolymers with various synthetic, biological, and pharmaceutical applications. In this review we highlight the successful advancement of Cu(I)-catalyzed click chemistry in glycoscience and its applications as well as future scope in different streams of applied sciences.

Advances in click chemistry for silica-based material construction

Click chemistry is undoubtedly the most powerful 1,3-dipolar cycloaddition reaction in organic synthesis.

Modification of fluorous substrates with oligo(ethylene glycol) via "click" chemistry for long-term resistance of cell adhesion

In this work perfluorinated substrates fabricated from SiO2 glass slides are modified with oligo(ethylene glycol) (OEG) units for long-term resistance of cell adhesion purposes, based on fluorous interactions and click chemistry. Specifically, fluorous substrates, prepared by treatment of glass slides with 1H, 1H, 2H, 2H-perfluorodecyltrimethoxysilane (FAS17), were coated with ethynyl-OEG-C8F17, followed by covalent attachment of an azido-OEG via copper-catalyzed azide-alkyne cycloaddition (CuAAC) "click" reaction. We demonstrate that the resultant surface avoid fibrinogen adsorption and resisted cell adhesion for over 14days. X-ray photoemission spectroscopy (XPS) analysis and contact angle goniometry measurements confirm the presence of the OEG molecules on the fluorous substrates. Bright field optical images show total absence of 3T3 fibroblast cells on the OEG modified fluorinated substrate for 1 and 5days, and a remarkably decrease of cell adhesion at 14days.

Surfaces Presenting α-Phenyl Mannoside Derivatives Enable Formation of Stable, High Coverage, Non-pathogenic Escherichia coli Biofilms against Pathogen Colonization

Prevention of pathogenic colonization on medical devices over a long period of time remains a great challenge, especially in a high-nutrient environment that accelerates production of biomass leading to biofouling of the device. Since biofouling and the subsequent pathogen colonization is eventually inevitable, a new strategy using non-pathogenic bacteria as living guards against pathogenic colonization on medical devices has attracted increasing interest. Crucial to the success of this strategy is to pre-establish a high coverage and stable biofilm of benign bacteria on the surface. Silicone elastomers are one of the most widely used materials in biomedical devices. In this work, we modified silicone surfaces to promote formation of high coverage and stable biofilms by a non-pathogenic Escherichia coli strain 83972 with type 1 fimbriae (fim+) to interfere the colonization of an aggressive biofilm-forming, uropathogenic Enterococcus faecalis. Although it is well known that mannoside surfaces promote the initial adherence of fim+ E. coli through binding to the FimH receptor at the tip of the type 1 fimbriae, it is not clear whether the fast initial adherence could lead to a high coverage and stable protective biofilm. To explore the role of mannoside ligands, we synthesized a series of alkyl and aryl mannosides varied in structure and immobilized them on silicone surfaces pre-coated with poly(amidoamine) (PAMAM) dendrimer. We found that stable and densely packed benign E. coli biofilms were formed on the surfaces presenting biphenyl mannoside with the highest initial adherence of fim+ E. coli. These non-pathogenic biofilms prevented the colonization of E. faecalis for 11 days at a high concentration (108 CFU mL-1, 100,000 times above the diagnostic threshold for urinary tract infection) in the nutrient-rich Lysogeny Broth (LB) media. The result shows a correlation among the initial adherence of fim+ E. coli 83972, the coverage and long-term stability of the resultant biofilms, as well as their efficiency for preventing the pathogen colonization.

Functionalization of alkyne-terminated thermally hydrocarbonized porous silicon nanoparticles with targeting peptides and antifouling polymers: effect on the human plasma protein adsorption

Porous silicon (PSi) nanomaterials combine a high drug loading capacity and tunable surface chemistry with various surface modifications to meet the requirements for biomedical applications. In this work, alkyne-terminated thermally hydrocarbonized porous silicon (THCPSi) nanoparticles were fabricated and postmodified using five bioactive molecules (targeting peptides and antifouling polymers) via a single-step click chemistry to modulate the bioactivity of the THCPSi nanoparticles, such as enhancing the cellular uptake and reducing the plasma protein association. The size of the nanoparticles after modification was increased from 176 to 180-220 nm. Dextran 40 kDa modified THCPSi nanoparticles showed the highest stability in aqueous buffer. Both peptide- and polymer-functionalized THCPSi nanoparticles showed an extensive cellular uptake which was dependent on the functionalized moieties presented on the surface of the nanoparticles. The plasma protein adsorption study showed that the surface modification with different peptides or polymers induced different protein association profiles. Dextran 40 kDa functionalized THCPSi nanoparticles presented the least protein association. Overall, these results demonstrate that the "click" conjugation of the biomolecules onto the alkyne-terminated THCPSi nanoparticles is a versatile and simple approach to modulate the surface chemistry, which has high potential for biomedical applications.

Quantitative assessment of the multivalent protein-carbohydrate interactions on silicon

A key challenge in the development of glycan arrays is that the sensing interface be fabricated reliably so as to ensure the sensitive and accurate analysis of the protein-carbohydrate interaction of interest, reproducibly. These goals are complicated in the case of glycan arrays as surface sugar density can influence dramatically the strength and mode of interaction of the sugar ligand at any interface with lectin partners. In this Article, we describe the preparation of carboxydecyl-terminated crystalline silicon (111) surfaces onto which are grafted either mannosyl moieties or a mixture of mannose and spacer alcohol molecules to provide "diluted" surfaces. The fabrication of the silicon surfaces was achieved efficiently through a strategy implicating a "click" coupling step. The interactions of these newly fabricated glycan interfaces with the lectin, Lens culinaris, have been characterized using quantitative infrared (IR) spectroscopy in the attenuated total geometry (ATR). The density of mannose probes and lectin targets was precisely determined for the first time by the aid of special IR calibration experiments, thus allowing for the interpretation of the distribution of mannose and its multivalent binding with lectins. These experimental findings were accounted for by numerical simulations of lectin adsorption.

Palladium-catalyzed coupling reactions for the functionalization of Si surfaces: superior stability of alkenyl monolayers

Palladium-catalyzed Suzuki, Heck, and Sonogashira coupling reactions were studied as reaction protocols for organic modification of Si surfaces. These synthetically useful protocols allow for surface modification of alkene, alkyne, and halide terminated surfaces. Surface oxidation and metal contamination were assessed by X-ray photoelectron spectroscopy. The nature of the primary passivation layer was an important factor in the oxidation resistance of the Si surface during the secondary functionalization. Specifically, the use of alkynes as the primary functionalization layer gave superior stability compared to alkene analogues. The ability to utilize Pd-catalyzed coupling chemistries on Si surfaces opens great versatility for potential molecular and nanoscale electronics and sensing/biosensing applications.

Grafting of poly(ethylene glycol) on click chemistry modified Si(100) surfaces

Poly(ethylene glycol) (PEG) is one of the most extensively studied antifouling coatings due to its ability to reduce protein adsorption and improve biocompatibility. Although the use of PEG for antifouling coatings is well established, the stability and density of PEG layers are often inadequate to provide optimum antifouling properties. To improve on these shortcomings, we employed the stepwise construction of PEG layers onto a silicon surface. Acetylene-terminated alkyl monolayers were attached to nonoxidized crystalline silicon surfaces via a one-step hydrosilylation procedure with 1,8-nonadiyne. The acetylene-terminated surfaces were functionalized via a copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction of the surface-bound alkynes with an azide to produce an amine terminated layer. The amine terminated layer was then further conjugated with PEG to produce an antifouling surface. The antifouling surface properties were investigated by testing adsorption of human serum albumin (HSA) and lysozyme (Lys) onto PEG layers from phosphate buffer solutions. Detailed characterization of protein fouling was carried out with X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) combined with principal component analysis (PCA). The results revealed no fouling of albumin onto PEG coatings whereas the smaller protein lysozyme adsorbed to a very low extent.

From the bottom up: dimensional control and characterization in molecular monolayers

Self-assembled monolayers are a unique class of nanostructured materials, with properties determined by their molecular lattice structures, as well as the interfaces with their substrates and environments. As with other nanostructured materials, defects and dimensionality play important roles in the physical, chemical, and biological properties of the monolayers. In this review, we discuss monolayer structures ranging from surfaces (two-dimensional) down to single molecules (zero-dimensional), with a focus on applications of each type of structure, and on techniques that enable characterization of monolayer physical properties down to the single-molecule scale.

Preparation of a responsive carbohydrate-coated biointerface based on graphene/azido-terminated tetrathiafulvalene nanohybrid material

A one-step method for the reduction of graphene oxide (GO) to reduced graphene oxide (rGO) is reported taking advantage of the electron-donor properties of an azido-terminated tetrathiafulvalene (TTF-N(3)). The resulting graphene/TTF-N(3) nanohybrid material is characterized by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR) spectroscopy, and by electrical and electrochemical means. The accessibility of the azide function to chemoselective modification by any alkyne-terminated partner molecule via Cu(I)-catalyzed "click" chemistry is demonstrated. In a proof of principle and motivated by the importance of glycan-modified materials, many alkynyl-terminated mannose units were grated onto graphene/TTF-N(3). The TTF-mannose units could be released efficiently from the graphene matrix by chemical oxidation of TTF-mannose surface units to TTF(2+)-mannose, using Fe(ClO(4))(3) or the electron-deficient tetracationic cyclophane cyclobis(paraquat-p-phenylene) (CBPQT(4+)).

Copper-free click biofunctionalization of silicon nitride surfaces via strain-promoted alkyne-azide cycloaddition reactions

Cu-free "click" chemistry is explored on silicon nitride (Si(3)N(4)) surfaces as an effective way for oriented immobilization of biomolecules. An ω-unsaturated ester was grafted onto Si(3)N(4) using UV irradiation. Hydrolysis followed by carbodiimide-mediated activation yielded surface-bound active succinimidyl and pentafluorophenyl ester groups. These reactive surfaces were employed for the attachment of bicyclononyne with an amine spacer, which subsequently enabled room temperature strain-promoted azide-alkyne cycloaddition (SPAAC). This stepwise approach was characterized by means of static water contact angle, X-ray photoelectron spectroscopy, and fluorescence microscopy. The surface-bound SPAAC reaction was studied with both a fluorine-tagged azide and an azide-linked lactose, yielding hydrophobic and bioactive surfaces for which the presence of trace amounts of Cu ions would have been problematic. Additionally, patterning of the Si(3)N(4) surface using this metal-free click reaction with a fluorescent azide is shown. These results demonstrate the ability of the SPAAC as a generic tool for anchoring complex molecules onto a surface under extremely mild, namely ambient and metal-free, conditions in a clean and relatively fast manner.

Role of interfacial water on protein adsorption at cross-linked polyethylene oxide interfaces

Sum frequency generation (SFG) vibrational spectroscopy was used to study the structure of water at cross-linked PEO film interfaces in the presence of human serum albumin (HSA) protein. Although PEO is charge neutral, the PEO film/water interface exhibited an SFG signal of water similar to that of a highly charged water/silica interface, signifying the presence of ordered water. Ordered water molecules were observed not only at the water/PEO interface, but also within the PEO film. It indicates that the PEO and water form an ordered hydrogen-bonded network extending from the bulk PEO film into liquid water, which can provide an energy barrier for protein adsorption. Upon exposure to the protein solution, the SFG spectra of water at the water/PEO interface remained nearly unperturbed. For comparison, the SFG spectra of water/silica and water/polystyrene interfaces were also studied with and without HSA in the solution. The SFG spectra of the interfacial water were correlated with the amount of protein adsorbed on the surfaces using fluorescence microscopy, which showed that the amount of protein adsorbed on the PEO film was about 10 times less than that on a polystyrene film and 3 times less than that on silica.

Photochemical grafting and patterning of organic monolayers on indium tin oxide substrates

Covalently attached organic layers on indium tin oxide (ITO) surfaces were prepared by the photochemical grafting with 1-alkenes. The surface modification was monitored with static water contact angle, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) measurements. Hydrophobic methyl-terminated ITO surfaces can be obtained via the grafting of tetradec-1-ene, whereas the attachment of ω-functionalized 1-alkenes leads to functionalized ITO surfaces. The use of a C≡C-Ge(CH(3))(3) terminus allows for facile tagging of the surface with an azido group via a one-pot deprotection/click reaction, resulting in bio/electronically active interfaces. The combination of nonaggressive chemicals (alkenes), mild reaction conditions (room temperature), and a light-induced grafting that facilitates the direct patterning of organic layers makes this simple approach highly promising for the development of ITO-based (bio)electronic devices.

Organic modification and subsequent biofunctionalization of porous anodic alumina using terminal alkynes

Porous anodic alumina (PAA) is a well-defined material that has found many applications. The range of applications toward sensing and recognition can be greatly expanded if the alumina surface is covalently modified with an organic monolayer. Here, we present a new method for the organic modification of PAA based on the reaction of terminal alkynes with the alumina surface. The reaction results in the the formation of a monolayer within several hours at 80 °C and is dependent on both oxygen and light. Characterization with X-ray photoelectron spectroscopy and infrared spectroscopy indicates formation of a well-defined monolayer in which the adsorbed species is an oxidation product of the 1-alkyne, namely, its α-hydroxy carboxylate. The obtained monolayers are fairly stable in water and at elevated temperatures, as was shown by monitoring the water contact angle. Modification with 1,15-hexadecadiyne resulted in a surface that has alkyne end groups available for further reaction, as was demonstrated by the subsequent reaction of N-(11-azido-3,6,9-trioxaundecyl)trifluoroacetamide with the modified surface. Biofunctionalization was explored by coupling 11-azidoundecyl lactoside to the surface and studying the subsequent adsorption of the lectin peanut agglutinin (PNA) and the yeast Candida albicans, respectively. Selective and reversible binding of PNA to the lactosylated surfaces was demonstrated. Moreover, PNA adsorption was higher on surfaces that exposed the β-lactoside than on those that displayed the α anomer, which was attributed to surface-associated steric hindrance. Likewise, the lactosylated surfaces showed increased colonization of C. albicans compared to unmodified surfaces, presumably due to interactions involving the cell wall β-glucan. Thus, this study provides a new modification method for PAA surfaces and shows that it can be used to induce selective adsorption of proteins and microorganisms.

Nanoscale water condensation on click-functionalized self-assembled monolayers

We have examined the nanoscale adsorption of molecular water under ambient conditions onto a series of well-characterized functionalized surfaces produced by Cu(I)-catalyzed alkyne-azide cycloaddition (CuAAC or "click") reactions on alkyne-terminated self-assembled monolayers on silicon. Water contact angle (CA) measurements reveal a range of macroscopic hydrophilicity that does not correlate with the tendency of these surfaces to adsorb water at the molecular level. X-ray reflectometry has been used to follow the kinetics of water adsorption on these "click"-functionalized surfaces, and also shows that dense continuous molecular water layers are formed over 30 h. For example, a highly hydrophilic surface, functionalized by an oligo(ethylene glycol) moiety (with a CA = 34°) showed 2.9 Å of adsorbed water after 30 h, while the almost hydrophobic underlying alkyne-terminated monolayer (CA = 84°) showed 5.6 Å of adsorbed water over the same period. While this study highlights the capacity of X-ray reflectometry to study the structure of adsorbed water on these surfaces, it should also serve as a warning for those intending to characterize self-assembled monolayers and functionalized surfaces to avoid contamination by even trace amounts of water vapor. Moreover, contact angle measurements alone cannot be relied upon to predict the likely degree of moisture uptake on such surfaces.

Click chemistry-based functionalization on non-oxidized silicon substrates

Copper-catalyzed azide-alkyne cycloaddition (CuAAC), combined with the chemical stability of the Si-C-bound organic layer, serves as an efficient tool for the modification of silicon substrates, particularly for the immobilization of complex biomolecules. This review covers recent advances in the preparation of alkynyl- or azido-terminated "clickable" platforms on non-oxidized silicon and their further derivatization by means of the CuAAC reaction. The exploitation of these "click"-functionalized organic thin films as model surfaces to study many biological events was also addressed, as they are directly relevant to the on-going effort of creating silicon-based molecular electronics and chemical/biomolecular sensors.