Development and applications of fluorogenic probes for mercury(II) based on vinyl ether oxymercuration

A turn-on anthraquinone-derived colorimetric and fluorometric dual-mode probe for highly selective Hg2+ determination and bioimaging in living organisms

Mercury ion (Hg2+) is considered a harmful neurotoxin, and real-time monitoring of Hg2+ concentrations in environmental and biological samples is critical. Fluorescent probes are a rapidly emerging visualization tool owing to their simple design and good selectivity. Herein, a novel fluorescence (FL) probe 2-(4-((6-((quinolin-8-yloxy)methyl)pyridin-2-yl)methyl)piperazin-1-yl)anthracene-9,10-dione (QPPA) is designed using piperazine as a linker between the anthraquinone group, which serves as a fluorophore, and N4O as the Hg2+ ligand. The probe exhibits FL "turn-on" sensing of Hg2+ because the complex inhibits the photo-induced electron transfer (PET) process. Moreover, QPPA can overcome the invasion by other possible cations, resulting in a clear color change from orange to colorless with the addition Hg2+. The chelation of QPPA with Hg2+ in a 1:1 ratio. Subsequently, the theoretically determined binding sites of the ligand to Hg2+ are validated through 1H NMR titration. The in situQPPA-Hg2+ complex can be subjected to Hg2+ extraction following the introduction of S2- owing to its robust binding capacity. The exceptional limit of detection values for Hg2+ and S2- are obtained as 63.0 and 79.1 nM (S/N = 3), respectively. Moreover, QPPA can display bright red FL in the presence of Hg2+ in different biological specimens such as HeLa cells, zebrafish, onion root tip tissues, and water flea Daphnia carinata, further providing an effective strategy for environmental monitoring and bioimaging of Hg2+ in living organisms.

4-Mercaptopyridine-Modified Sensor for the Sensitive Electrochemical Detection of Mercury Ions

As a highly toxic heavy metal ion, mercury ion (Hg²⁺) pollution has caused serious harm to the environment and human health. In this paper, 4-mercaptopyridine (4-MPY) was selected as the sensing material and decorated on the surface of a gold electrode. Trace Hg²⁺ could be detected by both differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) methods. The proposed sensor displayed a wide detection range from 0.01 μg/L to 500 μg/L with a low limit of detection (LOD) of 0.002 μg/L by EIS measurements. Combined with molecular simulations and electrochemical analyses, the chelating mechanism between Hg²⁺ and 4-MPY was explored. Through the analysis of binding energy (BE) values and stability constants, 4-MPY showed an excellent selectivity for Hg²⁺. In the presence of Hg²⁺, the coordination of Hg²⁺ with the pyridine nitrogen of 4-MPY was generated at the sensing region, which caused a change in the electrochemical activity of the electrode surface. Due to the strong specific binding capability, the proposed sensor featured excellent selectivity and an anti-interference capability. Furthermore, the practicality of the sensor for Hg²⁺ detection was validated with the samples of tap water and pond water, which demonstrated its potential application for on-site environmental detection.

Monitoring Hg2+ and MeHg+ poisoning in living body with an activatable near-infrared II fluorescence probe

Noninvasively imaging mercury poisoning in living organisms is critical to understanding its toxicity and treatments. Especially, simultaneous fluorescence imaging of Hg²⁺ and MeHg⁺in vivo is helpful to disclose the mysteries of mercury poisoning. The key limitation for mercury imaging in vivo is the low imaging signal-to-background ratio (SBR) and limited imaging depth, which may result in unreliable detection results. Here, we designed and prepared a near-infrared II (NIR II) emissive probe, NIR-Rh-MS, leveraging the "spirolactam ring-open" tactic of xanthene dyes for in situ visualization of mercury toxicity in mice. The probe produces a marked fluorescence signal at 1015 nm and displays good linear responses to Hg²⁺ and MeHg⁺ with excellent sensitivity, respectively. The penetration experiments elucidate that the activated NIR-II fluorescence signal of the probe penetrates to a depth of up to 7 mm in simulated tissues. Impressively, the probe can monitor the toxicity of Hg²⁺ in mouse livers and the accumulation of MeHg⁺ in mouse brains via intravital NIR-II imaging for the first time. Thus, we believe that detecting Hg²⁺ and MeHg⁺ in different organs with a single NIR-II fluorescence probe in mice would assuredly advance the toxicologic study of mercury poisoning in vivo.

Recent Advances on the Development of Chemosensors for the Detection of Mercury Toxicity: A Review

The harmful impact of mercury on biological systems is of great concern. Regardless of the efforts made by the regulating agencies, a decrease in Hg2+ concentration has not been realized, and hence mercury accumulation in the environment remains of utmost concern. Designing novel and efficient probes for recognition and detection of toxic metals in environmental samples has been of primary importance. Among the available techniques, probe designs involving the study of spectral properties has been preferred because of its obvious ease of instrumentation. Furthermore, occurrence of significant changes in the visible portion of electronic spectra enables detection by the naked eye, thereby endorsing the preference for development of probes with off-on binary responses to aid in the in-field sample analysis. The prominence is further streamlined to the use of fluorescence to help characterize on-response the cellular detection of Hg2+ with ease. In order to overcome the problem of developing efficient probes or sensors bearing fluorescence on-response mechanism that can work effectively in physiological conditions, various methodologies, such as chemo-dosimetric reaction mechanisms for the designing of new luminescent ligands, are being adopted. Additionally, modified charge transfer processes are also being considered for optical detection of the mercury (II) ion. In this review, all such possible techniques have been discussed in detail.

Fluorescent, colourimetric, and ratiometric probes based on diverse fluorophore motifs for mercuric(II) ion (Hg2+) sensing: highlights from 2011 to 2019

Though it has not been shown to deliver any biological importance, mercuric(II) ion (Hg²⁺) is a deleterious cation which poses grievous effects to the human body and/or the ecosystem, hence, the need for its sensitive and selective monitoring in both environmental and biological systems. Over the years, there has been a great deal of work in the use of fluorescent, colourimetric, and/or ratiometric probes for Hg²⁺ recognition. Essentially, the purpose of this review article is to give an overview of the advances made in the constructions of such probes based on the works reported in the period from 2011 to 2019. Discussion in this review work has been tailored to the kinds of fluorophore scaffolds used for the constructions of the probes reported. Selected examples of probes under each fluorophore subcategory were discussed with mentions of the typically determined parameters in an analytical sensing operation, including modulation in fluorescence intensity, optimal pH, detection limit, and association constant. The environmental and biological application ends of the probes were also touched where necessary. Important generalisations and conclusions were given at the end of the review. This review article highlights 196 references.

A coumarin-based fluorescent probe for Hg2+ and its application in living cells and zebrafish

Mercury (Hg) is a heavy metal with high toxicity and easy migration; it can be enriched through the food chain, and cause serious threats to the natural environment and human health. So, the development of a method that can be used to detect mercury ions (Hg²⁺ ) in the environment, in cells, and in organisms is very important. Here, a new 7-hydroxycoumarin-derived carbonothioate-based probe (CC-Hg) was designed and synthesized for detection of Hg²⁺ . After addition of Hg²⁺ , a large fluorescence enhancement was observed due to the formation of 7-hydroxyl, which reinforced the intramolecular charge transfer process. The CC-Hg probe had good water solubility and selectivity. Moreover, the probe was able to detect Hg²⁺ quantitatively over the concentration range 0-2 μM and with a detection limit of 7.9 nM. Importantly, we successfully applied the probe to detect Hg²⁺ in water samples, in living cells, and in zebrafish. The experimental results demonstrated its potential value in practical applications.

Fluorescein-Containing Superoxide Probes with a Modular Copper-Based Trigger

Fluorescein-derived superoxide probes featuring a copper(II) complex that can be activated by superoxide to initiate ether bond cleavage and uncage a fluorescein reporter for imaging in live cells are described. Compared to other superoxide sensing moieties, this bond cleavage strategy can be modularly adapted to fluorescent reporters with different properties without compromising the superoxide reactivity and selectivity. A green-emitting probe and its lysosome-targeting analogue have been successfully developed. Both probes are sensitive with more than 30-fold fluorescence enhancement towards superoxide and are highly selective with no significant response towards other reactive oxygen species. A structure-activity relationship study of the copper-based superoxide trigger showed that the secondary coordination environment of the copper(II) center is important for the superoxide reactivity and selectivity. The probes have been applied in imaging changes in intracellular superoxide level in live HeLa and HEK293T cells upon menadione stimulation and also in a cellular inflammation model in RAW 264.7 cells.

Fluorescent Detection of Methyl Mercury in Aqueous Solution and Live Cells Using Fluorescent Probe and Micelle Systems

It is highly challenging to develop fast and sensitive fluorescent methods for monitoring organic mercury in purely aqueous solutions as well as live cells. Especially, selective fluorescent detection of methylmercury over inorganic mercury ions has not been reported. We developed a fast and sensitive fluorescent detection method for Hg²⁺ ions as well as methylmercury using an amino acid-based fluorescent probe (1) and SDS micelles. The fluorescent probe in SDS micelles detected sensitively and selectively Hg²⁺ ions and methylmercury among 16 metal ions in purely aqueous solution by the enhancement of the red emission at 575 nm, and the detection of methylmercury was completed within 1 min. The probe in SDS micelles with EDTA showed highly sensitive and selective turn on detection for methylmercury over Hg²⁺. The limit of detection was 9.1 nM for Hg²⁺ (1.8 ppb, R² = 0.989) and 206 nM for CH₃Hg⁺ (R² = 0.997). 1 rapidly penetrated live cells and detected intracellular Hg²⁺ ions as well as CH₃Hg⁺ by the enhancement of both red emissions and green emissions. Subsequent treatment of EDTA into the cell confirmed the selective detection of methylmercury in the cells. The present work indicated that the fluorescent probe with micelle systems provided a fast, sensitive, and selective detection method for monitoring inorganic mercury as well as methyl mercury.

Fast and sensitive fluorescent detection of inorganic mercury species and methylmercury using a fluorescent probe based on the displacement reaction of arylboronic acid with the mercury species

We present a reaction-based fluorescent probe for Hg²⁺ and methylmercury based on the displacement reaction of arylboronic acid with mercury species.

Activatable fluorescent probes for hydrolase enzymes based on coumarin–hemicyanine hybrid fluorophores with large Stokes shifts

We show that the equilibrium of intramolecular spirocyclization of coumarin–hemicyanine hybrid fluorophores can be finely tuned by means of chemical modifications to develop activatable fluorescence probes for hydrolases with large Stokes shift.

Inorganic Chemistry Approaches to Activity-Based Sensing: From Metal Sensors to Bioorthogonal Metal Chemistry

The complex network of chemical processes that sustain life motivates the development of new synthetic tools to decipher biological mechanisms of action at a molecular level. In this context, fluorescent and related optical probes have emerged as useful chemical reagents for monitoring small-molecule and metal signals in biological systems, enabling visualization of dynamic cellular events with spatial and temporal resolution. In particular, metals occupy a central role in this field as analytes in their own right, while also being leveraged for their unique biocompatible reactivity with small-molecule substrates. This Viewpoint highlights the use of inorganic chemistry principles to develop activity-based sensing platforms mediated by metal reactivity, spanning indicators for metal detection to metal-based reagents for bioorthogonal tracking, and manipulation of small and large biomolecules, illustrating the privileged roles of metals at the interface of chemistry and biology.

Electron transfer and intersystem crossing triggered fluorescence quenching detection of mercury ions

Via a specific fluorescence quenching response, organic compound L serves as an excellent probe for Hg²⁺ in aqueous solution. The underlying detection mechanism is proposed based on the analyses of orbital interactions between probe L and Hg²⁺, which is new and intrinsically different from the previously proposed one. By investigating the excitation process and the excited state deactivation process of the organometallic compound formed by L and Hg²⁺, two non-emissive channels, namely intermolecular electron transfer and intersystem crossing, are observed. The co-effect of the two channels leads to the significant fluorescence quenching of L. Hopefully, the newly proposed mechanism can inspire experimentalists to encapsulate the two channels into one probe to achieve accurate detection of metal ions.

A new thiosemicarbazone fluorescent probe based on 9,9'-bianthracene for Hg2+ and Ag. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2019;215:34-40. [PMID: 30825868 DOI: 10.1016/j.saa.2019.02.036]

A new 9,9'-bianthracene-based thiosemicarbazone (D1) has been successfully synthesized and utilized for chemosensors. The properties of D1 were systematically investigated by UV-Vis, fluorescence titration and theoretical calculations. As a result, D1 exhibits a characteristic fluorescence quenching phenomenon in the presence of Hg²⁺ or Ag⁺ compared to other metal cations (Na⁺, K⁺, Mg²⁺, Ba²⁺, Al³⁺, Zn²⁺, Fe²⁺, Pb²⁺, Cu²⁺, Co²⁺, Cd²⁺, Ni²⁺ and Mn²⁺). The detection limits of Hg²⁺ and Ag⁺ reach 6.62×10^-7M and 1.99×10^-5M, respectively. This is mainly attributed to the Hg²⁺ (or Ag⁺) forms a stable five-membered ring with the N atom in Schiff base CN and the S atom in thiourea. The results suggest that the probe D1 is a promising candidate for chemosensors in aqueous media due to its highly selectivity for Hg²⁺ and Ag⁺.

Mercaptopyridine-Functionalized Gold Nanoparticles for Fiber-Optic Surface Plasmon Resonance Hg2+ Sensing

As a highly toxic heavy metal ion, divalent mercuric ion (Hg²⁺) is one of the most widely diffused and hazardous environmental pollutants. In this work, a simple, portable, and inexpensive fiber-optic sensor based on surface plasmon resonance (SPR) effect was developed for Hg²⁺ detection, which takes advantage of 4-mercaptopyridine (4-MPY)-functionalized Au nanoparticles (Au NPs/4-MPY) as a signal amplification tag. Based on the coordination between Hg²⁺ and nitrogen in the pyridine moiety, we developed the sensor by self-assembling 4-MPY on Au film surfaces to capture Hg²⁺ and then introducing Au NPs/4-MPY to generate a plasmonic coupling structure with the configuration of nanoparticle-on-mirror. The coupling between localized SPR increased changes in SPR wavelength, which allowed highly sensitive Hg²⁺ sensing in aqueous solution. The sensor exhibited superior selectivity for Hg²⁺ detection compared with other common metal ions in water. The sensor's Hg²⁺ detection limit is 8 nM under optimal conditions. Furthermore, we validated the sensor's practicality for Hg²⁺ detection in tap water samples and demonstrated its potential application for environmental water on-site monitoring.

A nanomolar detection of mercury(II) ion by a chemodosimetric rhodamine-based sensor in an aqueous medium: Potential applications in real water samples and as paper strips

A new promising rhodamine based colorimetric and fluorometric chemosensor, RDV has been designed and synthesized for specific detection of Hg²⁺ ion. It acts as highly selective "turn-on" fluorescent chemosensor for Hg²⁺ ion without interference from other competitive metal ions in aqueous acetonitrile medium. The drastic color change with addition of Hg²⁺, from colorless to pink, indicates RDV can acts as "naked-eye" indicator for Hg²⁺. The Hg²⁺ promoted selective hydrolysis of appended vinyl ether group in RDV followed by Hg²⁺ chelated complex formation with concomitant opening of spirolactam ring is the plausible sensing mechanism. The detailed absorption, fluorescence, ¹H NMR, ¹³C NMR and mass spectrometry confirms the proposed sensing mechanism. The limit of detection (LOD) of Hg²⁺ by RDV is 136 nM indicating the high sensitivity towards Hg²⁺. The RDV shows consistent spectroscopic response in biological pH range 4-10. In addition to explore practical applicability of RDV, its paper strips have been made and used to detect Hg²⁺ in pure water solution up to 10 ppm level. Furthermore, the potential application of RDV for the sensing of Hg²⁺ in real water samples (tap water and drinking waters from different sources) were also monitored and demonstrated.

Hg2+-Promoted Spirolactam Hydrolysis Reaction: A Design Strategy for the Highly Selective Sensing of Hg2+ over other Metal Ions in Aqueous Media

A mercury sensor (N-(rhodamine-6G)lactam-ethylenediamine-4-dimethylamino-cinnamaldehyde—RLED) based on the Hg²⁺-promoted hydrolysis reaction has been designed and developed with a combination of theoretical calculations and experimental investigations. The interaction between RLED and Hg²⁺ goes through a fast-initial stage with formation of a 1:1 complex, followed by a slow hydrolysis process. The formation of durable intermediate complexes is due to quite a long hydrolysis reaction time. As a result, RLED can selectively detect Hg²⁺ in the presence of other metal ions, with a detection limit of 0.08 μM for the colorimetric method, and of 0.008 μM with the fluorescent method. In addition, the RLED sensor can work in a solution with a small amount of organic solvent, with a wide pH range from 5 to 10. The time-dependent density functional theory has been used for investigations of the excitation and de-excitation processes in RLED, intermediate complexes, and reaction products, thereby clarifying the changes in the fluorescence intensity before and after the RLED interacts with Hg²⁺ ions.

A two-photon fluorescent probe for colorimetric and ratiometric monitoring of mercury in live cells and tissues

Owing to the extreme toxicity of mercury, methods for its selective and sensitive sensing in solutions, and in live cells and tissues are in great demand.

Fluorescent Chemosensors for Various Analytes Including Reactive Oxygen Species, Biothiol, Metal Ions, and Toxic Gases

The development of fluorescent chemosensors for various analytes has been actively pursued by chemists. Since their inception, these efforts have led to many new sensors that have found wide applications in the fields of chemistry, biology, environmental science, and physiology. The search for fluorescent chemosensors was initiated by a few pioneering groups in the late 1970s and 1980s and blossomed during the last two decades to include more than hundreds of research groups around the world. The targets for these sensors vary from metal ions, anions, reactive oxygen/nitrogen species, biothiols, and toxic gases. Our group has made contributions to this area in last 18 years. In this perspective, we briefly introduce the history of chemosensors and review studies that we have carried out.

Synthesis of a single 1,8-naphthalimide fluorophore as a molecular logic lab for simultaneously detecting of Fe3+, Hg2+ and Cu2

A novel fluorescence sensing 1,8-naphthalimide fluorophore is synthesized and investigated. The novel probe comprising two different binding moieties is capable to detect selectively Fe³⁺ over the other representative metal ions as well as a combination of biologically important cations such as Fe³⁺, Cu²⁺ and Hg²⁺ in the physiological range without an interfering effect of the pHs. Due to the remarkable fluorescence changes in the presence of Fe³⁺, Hg²⁺ and Cu²⁺ ions, INH and AND logic gates are executed and the system is able to act as a single output combinatorial logic circuit with three chemical inputs.

Target-triggered cascade assembly of a catalytic network as an artificial enzyme for highly efficient sensing

Determining the catalytic activity of artificial enzymes is an ongoing challenge. In this work, we design a porphyrin-based enzymatic network through the target-triggered cascade assembly of catalytic nanoparticles. The nanoparticles are synthesized via the covalent binding of hemin to amino-coated gold nanoparticles and then the axial coordination of the Fe center with a dual-functional imidazole or pyridine derivative. The network, which is specifically formed by coordination polymerization triggered by Hg2+ as the target, shows high catalytic activity due to the triple amplification of enzymatic activity during the cascade assembly. The catalytic dynamics are comparable to those of natural horseradish peroxidase. The catalytic characteristics can be ultrasensitively regulated by the target, leading to a selective methodology for the analysis of sub-attomolar Hg2+. It has also been used for "signal-on" imaging of reactive oxygen species in living cells. This work provides a new avenue for the design of enzyme mimics, and a powerful biocatalyst with signal switching for the development of biosensing protocols.

A Novel Sensitive Luminescence Probe Microspheres for Rapid and Efficient Detection of τ-Fluvalinate in Taihu Lake

Fluorescent molecularly imprinted polymers have shown great promise in biological or chemical separations and detection, due to their high stability, selectivity and sensitivity. In this work, fluorescent molecularly imprinted microsphere was synthesized via precipitation polymerization, which could separate efficiently and rapidly detect τ-fluvalinate (a toxic insecticide) in water samples, was reported. The fluorescent imprinted sensor showed excellent stability, outstanding selectivity and the limit of detection low to 12.14 nM, good regeneration ability which still kept good sensitivity after 8 cycling experiments and fluorescence quenching mechanism was illustrated in details. In addition, the fluorescent sensor was further used to detect τ-fluvalinate in real samples from Taihu Lake. Despite the relatively complex components of the environment water, the fluorescent imprinted microspheres sitll showed good recovery, clearly demonstrating the potental value of this smart sensor nanomaterial in environment monitoring.

Allyl Fluorescein Ethers as Promising Fluorescent Probes for Carbon Monoxide Imaging in Living Cells

Recently, the fluorescent detection of carbon monoxide (CO) in living cells has attracted great attention. However, due to the lack of effective ways to construct fluorescent CO probes, fluorescent detection of CO in living cells is still in its infancy. In this paper, we report for the first time the use of allyl ether as a reaction site for construction of fluorescent CO probes. By this way, two readily available allyl fluorescein ethers were prepared, which were found to be highly selective and sensitive probes for CO in the presence of PdCl₂. These probes have the merits of good stability, good water-solubility, and rapid and distinct colorimetric and remarkable fluorescent turn-on signal changes. Moreover, a very low dose of these two probes can be used to detect and track CO in living cells, indicating that these two probes could be very promising biological tools for CO detection in living systems. Overall, this work provided not only two new promising fluorescent CO probes but also a new way to devise fluorescent CO probes.

A novel Hg2+-selective fluorescent chemprobe based on thiooxorhodamine-B and β-C-glycoside

In this paper, two novel easily available probes based on rhodamine B and β-C-glycoside were synthesized and characterized by ¹H NMR, ¹³C NMR and elemental analysis. Sensor 1 exhibited very high sensitivity and selectivity toward Hg²⁺ over other metal ions, due to the opening of the spiro ring in thiooxorhodamine B caused by Hg²⁺ through desulfurization. The binding analysis using Job's plot suggested 1:1 stoichiometry for the complexes formed for Hg²⁺. The fluorescent probe is pH independent in medium condition and common interferent ions do not show any interference with the Hg²⁺ determination. It is anticipated that 1 could be a good candidate probe and has potential application for Hg²⁺ determination.

Highly Sensitive Fluorescence Detection of Hg2+ Based on a Water-soluble Conjugated Polymer with Carboxylate Groups

A label-free, highly selective, and highly sensitive fluorescent sensor to detect Hg²⁺ was developed using a water-soluble conjugated polymer with carboxylate groups (poly(2,5-bis(sodium 4-oxybutyrate)-1,4-phenylethynylene-alt-1,4-phenyleneethynylene, PPE-OBS) in this work. The fluorescence of PPE-OBS would be quenched because of the effect among the unique coordination-induced aggregation and electron transfers of PPE-OBS toward Hg²⁺. The linear relationship between the fluorescence intensity and concentration of Hg²⁺ was observed within the range from 6 × 10^-8 to 8 × 10^-5 mol L^-1 (R² = 0.9985), and the limit of detection was 2.10 × 10^-9 mol L^-1. The proposed method was applied to detect Hg²⁺ in environmental water samples, and satisfactory results were obtained.