Three-Dimensional Nanocrystal Superlattices Grown in Nanoliter Microfluidic Plugs

Nanocrystal Assemblies: Current Advances and Open Problems

We explore the potential of nanocrystals (a term used equivalently to nanoparticles) as building blocks for nanomaterials, and the current advances and open challenges for fundamental science developments and applications. Nanocrystal assemblies are inherently multiscale, and the generation of revolutionary material properties requires a precise understanding of the relationship between structure and function, the former being determined by classical effects and the latter often by quantum effects. With an emphasis on theory and computation, we discuss challenges that hamper current assembly strategies and to what extent nanocrystal assemblies represent thermodynamic equilibrium or kinetically trapped metastable states. We also examine dynamic effects and optimization of assembly protocols. Finally, we discuss promising material functions and examples of their realization with nanocrystal assemblies.

High-Precision Calculation of Nanoparticle (Nanocrystal) Potentials of Mean Force and Internal Energies

Thermodynamic stability assessment of nanocrystal systems requires precise free energy calculations. This study highlights the importance of meticulous control over various factors, including the thermostat, time step, potential cutoff, initial configuration, sampling method, and overall simulation duration. Free energy computations in dry (solvent-free) systems are on the order of several hundred kBT but can be obtained with consistent accuracy. However, calculation of internal energies becomes challenging, as they are typically much larger in magnitude than free energies and exhibit significant noise and reduced reliability. To address this limitation, we propose a new internal energy estimate that drastically reduces the noise. We also present formulas that enable the optimization of the parameters of the harmonic bias potential for optimal convergence. Finally, we discuss the implications of these findings for the computation of free energies in nanocrystal clusters and superlattices.

Metal-Halide Perovskite Nanocrystal Superlattice: Self-Assembly and Optical Fingerprints

Self-assembly of nanocrystals into superlattices is a fascinating process that not only changes geometric morphology, but also creates unique properties that considerably enrich the material toolbox for new applications. Numerous studies have driven the blossoming of superlattices from various aspects. These include precise control of size and morphology, enhancement of properties, exploitation of functions, and integration of the material into miniature devices. The effective synthesis of metal-halide perovskite nanocrystals has advanced research on self-assembly of building blocks into micrometer-sized superlattices. More importantly, these materials exhibit abundant optical features, including highly coherent superfluorescence, amplified spontaneous laser emission, and adjustable spectral redshift, facilitating basic research and state-of-the-art applications. This review summarizes recent advances in the field of metal-halide perovskite superlattices. It begins with basic packing models and introduces various stacking configurations of superlattices. The potential of multiple capping ligands is also discussed and their crucial role in superlattice growth is highlighted, followed by detailed reviews of synthesis and characterization methods. How these optical features can be distinguished and present contemporary applications is then considered. This review concludes with a list of unanswered questions and an outlook on their potential use in quantum computing and quantum communications to stimulate further research in this area.

Nanoparticle Assembly and Oriented Attachment: Correlating Controlling Factors to the Resulting Structures

Nanoparticle assembly and attachment are common pathways of crystal growth by which particles organize into larger scale materials with hierarchical structure and long-range order. In particular, oriented attachment (OA), which is a special type of particle assembly, has attracted great attention in recent years because of the wide range of material structures that result from this process, such as one-dimensional (1D) nanowires, two-dimensional (2D) sheets, three-dimensional (3D) branched structures, twinned crystals, defects, etc. Utilizing in situ transmission electron microscopy techniques, researchers observed orientation-specific forces that act over short distances (∼1 nm) from the particle surfaces and drive the OA process. Integrating recently developed 3D fast force mapping via atomic force microscopy with theories and simulations, researchers have resolved the near-surface solution structure, the molecular details of charge states at particle/fluid interfaces, inhomogeneity of surface charges, and dielectric/magnetic properties of particles that influence short- and long-range forces, such as electrostatic, van der Waals, hydration, and dipole-dipole forces. In this review, we discuss the fundamental principles for understanding particle assembly and attachment processes, and the controlling factors and resulting structures. We review recent progress in the field via examples of both experiments and modeling, and discuss current developments and the future outlook.

Growth and Self-Assembly of CsPbBr3 Nanocrystals in the TOPO/PbBr2 Synthesis as Seen with X-ray Scattering

Despite broad interest in colloidal lead halide perovskite nanocrystals (LHP NCs), their intrinsic fast growth has prevented controlled synthesis of small, monodisperse crystals and insights into the reaction mechanism. Recently, a much slower synthesis of LHP NCs with extreme size control has been reported, based on diluted TOPO/PbBr₂ precursors and a diisooctylphosphinate capping ligand. We report new insights into the nucleation, growth, and self-assembly in this reaction, obtained by in situ synchrotron-based small-angle X-ray scattering and optical absorption spectroscopy. We show that dispersed 3 nm Cs[PbBr₃] agglomerates are the key intermediate species: first, they slowly nucleate into crystals, and then they release Cs[PbBr₃] monomers for further growth of the crystals. We show the merits of a low Cs[PbBr₃] monomer concentration for the reaction based on oleate ligands. We also examine the spontaneous superlattice formation mechanism occurring when the growing nanocrystals in the solvent reach a critical size of 11.6 nm.

Highly Stable Perovskite Supercrystals via Oil-in-Oil Templating

Inorganic perovskites display an enticing foreground for their wide range of optoelectronic applications. Recently, supercrystals (SCs) of inorganic perovskite nanocrystals (NCs) have been reported to possess highly ordered structure as well as novel collective optical properties, opening new opportunities for efficient films. Here, we report the large-scale assembly control of spherical, cubic, and hexagonal SCs of inorganic perovskite NCs through templating by oil-in-oil emulsions. We show that an interplay between the roundness of the cubic NCs and the tension of the confining droplet surface sets the superstructure morphology, and we exploit this interplay to design dense hyperlattices of SCs. The SC films show strongly enhanced stability for at least two months without obvious structural degradation and minor optical changes. Our results on the controlled large-scale assembly of perovskite NC superstructures provide new prospects for the bottom-up production of optoelectronic devices based on the microfluidic production of mesoscopic building blocks.

Crystallization in Confinement

Many crystallization processes of great importance, including frost heave, biomineralization, the synthesis of nanomaterials, and scale formation, occur in small volumes rather than bulk solution. Here, the influence of confinement on crystallization processes is described, drawing together information from fields as diverse as bioinspired mineralization, templating, pharmaceuticals, colloidal crystallization, and geochemistry. Experiments are principally conducted within confining systems that offer well-defined environments, varying from droplets in microfluidic devices, to cylindrical pores in filtration membranes, to nanoporous glasses and carbon nanotubes. Dramatic effects are observed, including a stabilization of metastable polymorphs, a depression of freezing points, and the formation of crystals with preferred orientations, modified morphologies, and even structures not seen in bulk. Confinement is also shown to influence crystallization processes over length scales ranging from the atomic to hundreds of micrometers, and to originate from a wide range of mechanisms. The development of an enhanced understanding of the influence of confinement on crystal nucleation and growth will not only provide superior insight into crystallization processes in many real-world environments, but will also enable this phenomenon to be used to control crystallization in applications including nanomaterial synthesis, heavy metal remediation, and the prevention of weathering.

Self-assembly of anisotropic nanoparticles into functional superstructures

Self-assembly of colloidal nanoparticles (NPs) into superstructures offers a flexible and promising pathway to manipulate the nanometer-sized particles and thus make full use of their unique properties. This bottom-up strategy builds a bridge between the NP regime and a new class of transformative materials across multiple length scales for technological applications. In this field, anisotropic NPs with size- and shape-dependent physical properties as self-assembly building blocks have long fascinated scientists. Self-assembly of anisotropic NPs not only opens up exciting opportunities to engineer a variety of intriguing and complex superlattice architectures, but also provides access to discover emergent collective properties that stem from their ordered arrangement. Thus, this has stimulated enormous research interests in both fundamental science and technological applications. This present review comprehensively summarizes the latest advances in this area, and highlights their rich packing behaviors from the viewpoint of NP shape. We provide the basics of the experimental techniques to produce NP superstructures and structural characterization tools, and detail the delicate assembled structures. Then the current understanding of the assembly dynamics is discussed with the assistance of in situ studies, followed by emergent collective properties from these NP assemblies. Finally, we end this article with the remaining challenges and outlook, hoping to encourage further research in this field.

Magic number colloidal clusters as minimum free energy structures

Clusters in systems as diverse as metal atoms, virus proteins, noble gases, and nucleons have properties that depend sensitively on the number of constituent particles. Certain numbers are termed ‘magic’ because they grant the system with closed shells and exceptional stability. To this point, magic number clusters have been exclusively found with attractive interactions as present between atoms. Here we show that magic number clusters exist in a confined soft matter system with negligible interactions. Colloidal particles in an emulsion droplet spontaneously organize into a series of clusters with precisely defined shell structures. Crucially, free energy calculations demonstrate that colloidal clusters with magic numbers possess higher thermodynamic stability than those off magic numbers. A complex kinetic pathway is responsible for the efficiency of this system in finding its minimum free energy configuration. Targeting similar magic number states is a strategy towards unique configurations in finite self-organizing systems across the scales.

Magic number cluster with closed shells and increased stability often result from potential energy minimization between attractive atoms or particles. Here, Wang et al. show that such magic number clusters can also result from entropy maximization in colloidal systems with negligible interactions.

Space- and time-resolved small angle X-ray scattering to probe assembly of silver nanocrystal superlattices

The structure of nanocrystal superlattices has been extensively studied and well documented, however, their assembly process is poorly understood. In this work, we demonstrate an in situ space- and time-resolved small angle X-ray scattering measurement that we use to probe the assembly of silver nanocrystal superlattices driven by electric fields. The electric field creates a nanocrystal flux to the surface, providing a systematic means to vary the nanocrystal concentration near the electrode and thereby to initiate nucleation and growth of superlattices in several minutes. Using this approach, we measure the space- and time-resolved concentration and polydispersity gradients during deposition and show how they affect the superlattice constant and degree of order. We find that the field induces a size-selection effect that can reduce the polydispersity near the substrate by 21% leading to better quality crystals and resulting in field strength-dependent superlattice lattice constants.

Crystallization of Nanocrystals in Spherical Confinement Probed by in Situ X-ray Scattering

We studied the formation of supraparticles from nanocrystals confined in slowly evaporating oil droplets in an oil-in-water emulsion. The nanocrystals consist of an FeO core, a CoFe2O4 shell, and oleate capping ligands, with an overall diameter of 12.5 nm. We performed in situ small- and wide-angle X-ray scattering experiments during the entire period of solvent evaporation and colloidal crystallization. We observed a slow increase in the volume fraction of nanocrystals inside the oil droplets up to 20%, at which a sudden crystallization occurs. Our computer simulations show that crystallization at such a low volume fraction is only possible if attractive interactions between colloidal nanocrystals are taken into account in the model as well. The spherical supraparticles have a diameter of about 700 nm and consist of a few crystalline face-centered cubic domains. Nanocrystal supraparticles bear importance for magnetic and optoelectronic applications, such as color tunable biolabels, color tunable phosphors in LEDs, and miniaturized lasers.

In-Situ Microfluidic Study of Biphasic Nanocrystal Ligand-Exchange Reactions Using an Oscillatory Flow Reactor

Oscillatory flow reactors provide a surface energy-driven approach for automatically screening reaction conditions and studying reaction mechanisms of biphasic nanocrystal ligand-exchange reactions. Sulfide and cysteine ligand-exchange reactions with as-synthesized CdSe quantum dots (QDs) are chosen as two model reactions. Different reaction variables including the new-ligand-to-QD ratio, the size of the particles, and the original ligand type are examined systematically. Based on the in situ-obtained UV/Vis absorption spectra during the reaction, we propose two different exchange pathways for the sulfide exchange reaction.

Progress of crystallization in microfluidic devices

Microfluidic technology provides a unique environment for the investigation of crystallization processes at the nano or meso scale. The convenient operation and precise control of process parameters, at these scales of operation enabled by microfluidic devices, are attracting significant and increasing attention in the field of crystallization. In this paper, developments and applications of microfluidics in crystallization research including: crystal nucleation and growth, polymorph and cocrystal screening, preparation of nanocrystals, solubility and metastable zone determination, are summarized and discussed. The materials used in the construction and the structure of these microfluidic devices are also summarized and methods for measuring and modelling crystal nucleation and growth process as well as the enabling analytical methods are also briefly introduced. The low material consumption, high efficiency and precision of microfluidic crystallizations are of particular significance for active pharmaceutical ingredients, proteins, fine chemicals, and nanocrystals. Therefore, it is increasingly adopted as a mainstream technology in crystallization research and development.

Tracing the Surfactant-Mediated Nucleation, Growth, and Superpacking of Gold Supercrystals Using Time and Spatially Resolved X-ray Scattering

The nucleation and growth process of gold supercrystals in a surfactant diffusion approach is followed by simultaneous small- and wide-angle X-ray scattering (SAXS/WAXS), supplemented with scanning electron microscopy. The results indicate that supercrystal nucleation can be activated efficiently upon placing a concentrated surfactant solution of a nematic phase on top of a gold nanocrystal solution droplet trapped in the middle of a vertically oriented capillary tube. Supercrystal nuclei comprised of tens of gold nanocubes are observed nearly instantaneously in the broadened liquid-liquid interface zone of a steep gradient of surfactant concentration, revealing a diffusion-kinetics-controlled nucleation process. Once formed, the nuclei can sediment into the naoncrystal zone below, and grow efficiently into cubic or tetragonal supercrystals of ∼1 μm size within ∼100 min. Supercrystals matured during sedimentation in the capillary can accumulate and face-to-face align at the bottom liquid-air interface of the nanocrystal droplet. This is followed by superpacking of the supercrystals into highly oriented hierarchical sheets, with a huge number of gold nanocubes aligned for largely coherent crystallographic orientations.

Self-Assembly of Colloidal Nanocrystals: From Intricate Structures to Functional Materials

Chemical methods developed over the past two decades enable preparation of colloidal nanocrystals with uniform size and shape. These Brownian objects readily order into superlattices. Recently, the range of accessible inorganic cores and tunable surface chemistries dramatically increased, expanding the set of nanocrystal arrangements experimentally attainable. In this review, we discuss efforts to create next-generation materials via bottom-up organization of nanocrystals with preprogrammed functionality and self-assembly instructions. This process is often driven by both interparticle interactions and the influence of the assembly environment. The introduction provides the reader with a practical overview of nanocrystal synthesis, self-assembly, and superlattice characterization. We then summarize the theory of nanocrystal interactions and examine fundamental principles governing nanocrystal self-assembly from hard and soft particle perspectives borrowed from the comparatively established fields of micrometer colloids and block copolymer assembly. We outline the extensive catalog of superlattices prepared to date using hydrocarbon-capped nanocrystals with spherical, polyhedral, rod, plate, and branched inorganic core shapes, as well as those obtained by mixing combinations thereof. We also provide an overview of structural defects in nanocrystal superlattices. We then explore the unique possibilities offered by leveraging nontraditional surface chemistries and assembly environments to control superlattice structure and produce nonbulk assemblies. We end with a discussion of the unique optical, magnetic, electronic, and catalytic properties of ordered nanocrystal superlattices, and the coming advances required to make use of this new class of solids.

Continuous chemical operations and modifications on magnetic γ-Fe2O3 nanoparticles confined in nanoliter droplets for the assembly of fluorescent and magnetic SiO2@γ-Fe2O3

An automated droplet microfluidic platform is described for the manipulation of magnetic nanoparticles and their assembly with fluorescent silica nanoparticles.

Synthesis of monodisperse copper nanoparticles using a modified digestive ripening technique and formation of superlattices

Synthesis of very uniform copper nanoparticles and subsequent superlattice formation.

A robust microfluidic device for the synthesis and crystal growth of organometallic polymers with highly organized structures

A simple and robust microfluidic device was developed to synthesize organometallic polymers with highly organized structures. The device is compatible with organic solvents. Reactants are loaded into pairs of reservoirs connected by a 15 cm long microchannel prefilled with solvents, thus allowing long-term counter diffusion for self-assembly of organometallic polymers. The process can be monitored, and the resulting crystalline polymers are harvested without damage. The device was used to synthesize three insoluble silver acetylides as single crystals of X-ray diffraction quality. Importantly, for the first time, the single-crystal structure of silver phenylacetylide was determined. The reported approach may have wide applications, such as crystallization of membrane proteins, synthesis and crystal growth of organic, inorganic, and polymeric coordination compounds, whose single crystals cannot be obtained using traditional methods.

Droplet electrospray ionization mass spectrometry for high throughput screening for enzyme inhibitors

High throughput screening (HTS) is important for identifying molecules with desired properties. Mass spectrometry (MS) is potentially powerful for label-free HTS due to its high sensitivity, speed, and resolution. Segmented flow, where samples are manipulated as droplets separated by an immiscible fluid, is an intriguing format for high throughput MS because it can be used to reliably and precisely manipulate nanoliter volumes and can be directly coupled to electrospray ionization (ESI) MS for rapid analysis. In this study, we describe a "MS Plate Reader" that couples standard multiwell plate HTS workflow to droplet ESI-MS. The MS plate reader can reformat 3072 samples from eight 384-well plates into nanoliter droplets segmented by an immiscible oil at 4.5 samples/s and sequentially analyze them by MS at 2 samples/s. Using the system, a label-free screen for cathepsin B modulators against 1280 chemicals was completed in 45 min with a high Z-factor (>0.72) and no false positives (24 of 24 hits confirmed). The assay revealed 11 structures not previously linked to cathepsin inhibition. For even larger scale screening, reformatting and analysis could be conducted simultaneously, which would enable more than 145,000 samples to be analyzed in 1 day.

Crucial role of anions on arrangement of Cu₂S nanocrystal superstructures

Both of the arrays of Cu₂S nanowires and the superlattices of Cu₂S nanoparticles are obtained by the solventless thermolysis of copper thiolate in the presence of laurate. For the first time, the types of anions in the reaction system, which are generally neglected in previous studies, are found to determine the structure of the final assembly products. Furthermore, experimental results shows in the presence of Cl⁻ ions, Cl⁻ ions participate in the self-assembly process and promote the formation of Cu₂S nanowire arrays. Finally, the content of Cl⁻ ions is gradually decreased with assembly reaction proceeding. Therefore, duiring the process, Cl⁻ ions play a role of 'catassembly' in the formation of Cu₂S nanocrystal superstructures.

Synthesis and in situ observation of 3D superlattices of gold nanoparticles using oil-in-water emulsion

In this work oil-in-water emulsion has been successfully used as a confined environment to grow 3D superlattices of gold nanoparticles. The superlattices were grown from 5 nm uniform gold nanoparticles using slow destabilization method. The confined environment was created by forming a stable emulsion where the gold colloid suspended in toluene was used as oil phase. Superlattices were also formed in bulk solution using the same slow destabilization method. A comparative study reveals that compact superlattices form more readily inside the emulsion drops as compared to bulk precipitation. The unstable colloid (in bulk or as emulsion) was aged for various periods at 5 °C to form more compact superlattices. The best superlattices with sharp corners are observed when the superlattices are formed inside the emulsion and aged for a month. Two key parameters, the incubation temperature and anti-solvent concentration, are optimized to obtain larger superlattices with sharp features. A new method is also demonstrated for in situ observation of superlattice formation using an optical microscope.

Mesocrystalline materials and the involvement of oriented attachment – a review

In this work the oriented attachment and mesocrystal formation via non-classical pathways have been reviewed with particular emphasis being placed on their self-assembly mechanisms as well as the new collective properties of the resulting crystalline nanoparticular arrangements and their potential uses in applications.

Microfluidic-induced growth and shape-up of three-dimensional extended arrays of densely packed nanoparticles

We use evaporation within a microfluidic device to extract the solvent of a (possibly very dilute) dispersion of nanoparticles and concentrate the dispersion until a solid made of densely packed nanoparticles grows and totally invades the microfluidic geometry. The growth process can be rationalized as an interplay between evaporation-induced flow and kinetic and thermodynamic coefficients which are system-dependent; this yields limitations to the growth process illustrated here on two main cases: evaporation- and transport-limited growth. Importantly, we also quantify how colloidal stability may hinder the growth and show that care must be taken as to the composition of the initial dispersion, especially regarding traces of ionic species that can destabilize the suspension upon concentration. We define a stability chart, which, when fulfilled, permits us to grow and shape-up solids, including superlattices and extended and thick arrays of nanoparticles made of unary and binary dispersions, composites, and heterojunctions between distinct types of nanoparticles. In all cases, the geometry of the final solid is imparted by that of the microfluidic device.

Ligand-dominated temperature dependence of agglomeration kinetics and morphology in alkyl-thiol-coated gold nanoparticles

The stability of nanoparticle suspensions and the details of their agglomeration depend on the interactions between particles. We study this relationship in gold nanoparticles stabilized with different alkyl thiols in heptane. Temperature-dependent interactions were inferred from small-angle x-ray scattering, agglomeration kinetics from dynamic light scattering, and agglomerate morphologies from transmission electron microscopy. We find that the particles precipitate at temperatures below the melting temperatures of the dry ligands. Agglomerates grow with rates that depend on the temperature: Around precipitation temperature, globular agglomerates form slowly, while at lower temperatures, fibrilar agglomerates form rapidly. All agglomerates contain random dense packings rather than crystalline superlattices. We conclude that ligand-ligand and ligand-solvent interactions of the individual particles dominate suspension stability and agglomeration kinetics. The microscopic packing is dominated by interactions between the ligands of different nanoparticles.

Microfluidic one-step fabrication of radiopaque alginate microgels with in situ synthesized barium sulfate nanoparticles

In this work, we report a new strategy to fabricate monodispersed radiopaque alginate (Ba-alginate) microgels by a one-step microfluidic method. Alginate droplets containing sulfate ions are first formed by a flow focusing microfluidic setup. These alginate droplets are subsequently solidified by barium ions in a collection bath. During the solidification process, excessive barium ions in the collection bath also react with sulfate ions in the alginate droplet, resulting in barium sulfate (BaSO(4)) nanoparticles in situ synthesized (acting as radiopaque imaging agents) within the Ba-alginate microgels. Scanning electron microscopy (SEM) combined with energy-dispersive X-ray spectroscopy (EDX) illustrate that 800 nm BaSO(4) nanoparticles are uniformly distributed inside the 30 μm Ba-alginate microgels, with 62 wt% of elemental barium (Ba). In addition, X-ray diffraction (XRD) measurements indicate that the BaSO(4) nanoparticles consist of 10 nm in situ synthesized BaSO(4) crystallites. The alginate microgels act as a soft and porous template to prevent the precipitation and aggregation of BaSO(4) nanoparticles. The Ba-alginate microgels are also visible under X-ray radiation. The facile route to fabricate alginate microgels as radiopaque embolic materials is of particular importance for endovascular embolization and localized diagnostic imaging applications. Similar approaches can also be adopted for synthesizing other inorganic nanoparticles in microgels.

Highly dispersed Co0.5Zn0.5Fe2O4/polypyrrole nanocomposites for cost-effective, high-performance defluoridation using a magnetically controllable microdevice

Highly dispersed Co(0.5)Zn(0.5)Fe(2)O(4)/polypyrrole (CZFO/PPy) nanocomposites with enhanced electromagnetic properties and large surface area were rapidly and controllably prepared using microfluidic reactors. A novel magnetically controllable microdevice using the new adsorbent in a highly dispersed form was assembled and used for fluoride adsorption. Compared with traditional adsorption methods, the device displayed high adsorption efficiency and capacity. The adsorbents were regenerated with no significant loss in defluoridation ability, which indicates that the device is a realistic and highly efficient alternative way of removing fluoride pollution at low cost.

Temperature and chemical bonding-directed self-assembly of cobalt phosphide nanowires in reaction solutions into vertical and horizontal alignments

The preparation of vertically or horizontally aligned self-assemblies of CoP nanowires is demonstrated for the first time by aging them in the reaction solution for a sufficient time at 20 or 0 °C. This strategy opens up a way for exploring the controlled self-assembly of various highly anisotropic nanostructures into long-range ordered structures with collective properties.

From nano to micro: synthesis and optical properties of homogeneous spheroidal gold particles and their superlattices

Iodide ions have been used as an additive to fabricate homogeneous gold spheres with a la carte dimensions, ranging from the nano- (50 nm) to the microscale (ca. 1 μm). Due to the high uniformity and surface functionalization of the produced materials, they undergo spontaneous assembly into organized superlattices upon solvent drying. Thus, optical properties of the particles including localized surface plasmon resonances and surface enhanced Raman scattering (SERS) response, both in solution and organized into superlattices, are also reported.

Computer simulations of nucleation of nanoparticle superclusters from solution

This paper presents simulation studies of nanoparticle supercluster (NPSC) nucleation from a temperature quenched system. The nanoparticles are represented as 5 nm, spherical gold nanoparticles ligated with alkane thiols. The pair potential accounts for the van der Waals interaction between the metallic cores and ligand-ligand and ligand-solvent interactions. Phenomena well-known for molecular systems are observed including a prenucleation induction period, fluctuating prenucleation clusters that predominately add monomers one at a time, a critical nucleus size, and growth of NPSCs from solution in the presence of an equilibrium supernatant, all consistent with classical nucleation theory. However, only the largest prenucleating clusters are dense, and the cluster size can occasionally range greater than the critical size in the prenucleation regime until a cluster with low enough energy occurs, then nucleation ensues. Late in the nucleation process, the clusters display a crystalline structure that is a random mix of face-centered cubic (fcc) and hexagonal close-packed (hcp) lattices and indistinguishable from a randomized icosahedra structure.