Chiral Brønsted acid from a cationic gold(I) complex: catalytic enantioselective protonation of silyl enol ethers of ketones

Organocatalytic enantioselective decarboxylative protonation of α-alkyl-α-aryl malonate monoesters

In contrast to the well-established enzymatic enantioselective decarboxylative protonation (EDP), the corresponding chemocatalytic reactions of acyclic malonic acid derivatives remain challenging. Herein, we developed a biomimetic EDP of α-alkyl-α-aryl malonate monoesters using a chiral 1,2-trans-diaminocyclohexane-based N-sulfonamide as an organocatalyst. The method demonstrates excellent chemical yields, good enantioselectivity, mild reaction conditions, and the generation of only CO2 as waste.

Ligand effects, solvent cooperation, and large kinetic solvent deuterium isotope effects in gold(I)-catalyzed intramolecular alkene hydroamination

Kinetic studies on the intramolecular hydroamination of protected variants of 2,2-diphenylpent-4-en-1-amine were carried out under a variety of conditions with cationic gold catalysts supported by phosphine ligands. The impact of ligand on gold, protecting group on nitrogen, and solvent and additive on reaction rates was determined. The most effective reactions utilized more Lewis basic ureas, and more electron-withdrawing phosphines. A DCM/alcohol cooperative effect was quantified, and a continuum of isotope effects was measured with low KIE's in the absence of deuterated alcoholic solvent, increasing to large solvent KIE's when comparing reactions in pure MeOH to those in pure MeOH-d4. The effects are interpreted both within the context of a classic gold π-activation/protodeauration mechanism and a general acid-catalyzed mechanism without intermediate gold alkyls.

Catalytic Enantioselective Protonation of Gold Enolates Enabled by Cooperative Gold(I) Catalysis

Enantioselective protonation is a versatile approach to the construction of tertiary α-stereocenters, which are common structural motifs in various natural products and biologically relevant compounds. Herein we report a mild access to these chiral centers using cooperative gold(I) catalysis. From cyclic ketone enol carbonates, this asymmetric catalysis provides highly enantioselective access to cyclic ketones featuring an α tertiary chiral center, including challenging 2-methylsuberone. In combination with the gold-catalyzed formation of cyclopentadienyl carbonates in a one-pot, two-step process, this chemistry enables expedient access to synthetically versatile α'-chiral cyclopentenones with excellent enantiomeric excesses from easily accessible enynyl carbonate substrates.

Revised Mechanism of Gold-Catalyzed Thioallylation of Propiolates

Gold-catalyzed enantioselective thioallylation of propiolates proved effective in delivering highly enantio-enriched α-allyl-β-thioacrylates. In this work, we report a revised mechanism for this process based on the new mechanistic experiments and kinetic data in the presence of a competitive inhibitor. The employment of thioethers as nucleophiles inevitably involves their competitive binding to the only catalytic site of the Au(I) catalyst, which may inhibit the activity. We developed a modified Hammett plot in the presence of a dummy thioether inhibitor, which revealed a true kinetic profile, excluding the effect of inhibition. A revised mechanism suggested that the conjugate addition of thioethers to the Au(I)-activated alkynes is the turnover-limiting step, and the subsequent [3,3]-rearrangement occurs quickly, suggesting the efficacy of the sulfonium-based approach in accelerating Claisen rearrangement. In addition, the enantioselectivity was suggested to be determined during the sigmatropic rearrangement by discriminating the prochiral olefin faces of the allyl group in the σ-bound Au(I) complex.

Iron-catalyzed hydroarylation of 1,3-dienes with indoles

An efficient iron-catalyzed hydroarylation of 1,3-dienes with indoles has been developed for the first time.

Synthesis of Cyclohexanones by a Tandem Photocatalyzed Annulation

The rapid synthesis of cyclic scaffolds is of high importance to the chemistry community. Strategies for the convergent synthesis of substituted carbocycles and heterocycles remain underexplored despite the plethora of applications that these cyclic motifs have in the pharmaceutical and materials industries. Reported herein is a tandem carbene and photoredox-catalyzed process for the convergent synthesis of substituted cycloalkanones via a formal [5 + 1] cycloaddition. Featuring two distinct photoredox cycles and a novel α-oxidation of benzylic ketones, this reaction offers a mild approach to construct two contiguous C-C bonds and eliminates the need for strong bases or expensive metal catalysts. The utility of this method is highlighted through various product diversification reactions that allow access to a range of important cyclic scaffolds.

Catalytic α-Deracemization of Ketones Enabled by Photoredox Deprotonation and Enantioselective Protonation

This study reports the catalytic deracemization of ketones bearing stereocenters in the α-position in a single reaction via deprotonation, followed by enantioselective protonation. The principle of microscopic reversibility, which has previously rendered this strategy elusive, is overcome by a photoredox deprotonation through single electron transfer and subsequent hydrogen atom transfer (HAT). Specifically, the irradiation of racemic pyridylketones in the presence of a single photocatalyst and a tertiary amine provides nonracemic carbonyl compounds with up to 97% enantiomeric excess. The photocatalyst harvests the visible light, induces the redox process, and is responsible for the asymmetric induction, while the amine serves as a single electron donor, HAT reagent, and proton source. This conceptually simple light-driven strategy of coupling a photoredox deprotonation with a stereocontrolled protonation, in conjunction with an enrichment process, serves as a blueprint for other deracemizations of ubiquitous carbonyl compounds.

Enantioselective α-Arylation of Ketones via a Novel Cu(I)-Bis(phosphine) Dioxide Catalytic System

A novel catalytic system based on copper(I) and chiral bis(phosphine) dioxides is described. This allows the arylation of silyl enol ethers to access enolizable α-arylated ketones in good yields and enantiomeric excess up to 95%. Noncyclic ketones are amenable substrates with this method, which complements other approaches based on palladium catalysis. Optimization of the ligand structure is accomplished via rational design driven by correlation analysis. Preliminary mechanistic hypotheses are also evaluated in order to identify the role of chiral bis(phosphine) dioxides.

(C6F5)3B·(HF)n-catalyzed glycosylation of disarmed glycosyl fluorides and reverse glycosyl fluorides

(C₆F₅)₃B·(HF)_n-catalyzed glycosylation of disarmed glycosyl fluorides and reverse glycosyl fluorides with structurally diverse nucleophiles has been achieved.

Dinuclear gold catalysis

This review summarizes the recent achievements of dinuclear gold-catalyzed redox coupling, asymmetric catalysis and photocatalysis. The dinuclear gold catalysts show a better catalytic performance than the mononuclear gold catalysts in certain cases.

The Silicon-Hydrogen Exchange Reaction: A Catalytic σ-Bond Metathesis Approach to the Enantioselective Synthesis of Enol Silanes

The use of chiral enol silanes in fundamental transformations such as Mukaiyama aldol, Michael, and Mannich reactions as well as Saegusa-Ito dehydrogenations has enabled the chemical synthesis of enantiopure natural products and valuable pharmaceuticals. However, accessing these intermediates in high enantiopurity has generally required the use of either stoichiometric chiral precursors or stoichiometric chiral reagents. We now describe a catalytic approach in which strongly acidic and confined imidodiphosphorimidates (IDPi) catalyze highly enantioselective interconversions of ketones and enol silanes. These "silicon-hydrogen exchange reactions" enable access to enantiopure enol silanes via tautomerizing σ-bond metatheses, either in a deprotosilylative desymmetrization of ketones with allyl silanes as the silicon source or in a protodesilylative kinetic resolution of racemic enol silanes with a carboxylic acid as the silyl acceptor.

Gold(I)-Mediated Cycloisomerization/Cycloaddition Enables Bioinspired Syntheses of Neonectrolides B-E and Analogues

Development of a synthetic route to the oxaphenalenone (OP) natural products neonectrolides B-E is described. The synthesis relies on gold-catalyzed 6-endo-dig hydroarylation of an unusual enynol substrate as well as a one-pot Rieche formylation/cyclization/deprotection sequence to efficiently construct the tricyclic oxaphenalenone framework in the form of a masked ortho-quinone methide (o-QM). A tandem cycloisomerization/[4 + 2] cycloaddition strategy was employed to quickly construct molecules resembling the neonectrolides. The tricyclic OP natural product SF226 could be converted to corymbiferan lactone E and a related masked o-QM. Our study culminates with the application of the tandem reaction sequence to syntheses of neonectrolides B-E as well as previously unreported exo-diastereomers.

Enantioselective photoredox dehalogenative protonation

We report an enantioselective photoredox dehalogenative protonation as a new type of asymmetric protonation. As a paradigm, with a cooperative catalytic system consisting of a chiral H-bonding catalyst and a dicyanopyrazine-derived chromophore (DPZ) photosensitizer that is irradiated with visible light, a range of cyclic and acyclic ketones with labile chiral secondary C-F, C-Cl and C-Br bonds at the α-position were obtained in high yields with good to excellent enantioselectivities (up to >99% ee) by using a secondary amine as the terminal reductant. Given the ready accessibility of halides, the success of this work should provide inspiration for constructing diverse chiral α-tertiary carbonyls and their variants.

Traceless Solid-Phase Synthesis of Ketones via Acid-Labile Enol Ethers: Application in the Synthesis of Natural Products and Derivatives

In solid-phase organic synthesis, Wang resin is traditionally used for the immobilization of acids, alcohols, phenols, and amines. We report the use of Wang resin for the traceless synthesis of ketones via acid-labile enol ethers. We demonstrate the practicality of this synthetic strategy on the solid-phase synthesis of pyrrolidine-2,4-diones, which represent the core structure of several natural products, including tetramic acid. Base-triggered condensation of pyrrolidine-2,4-diones yielded 4-hydroxy-1,1',2',5-tetrahydro-2H,5'H-[3,3'-bipyrrole]-2,5'-diones.

Chemoselective Borane-Catalyzed Hydroarylation of 1,3-Dienes with Phenols

A B(C₆ F₅ )₃ -catalyzed hydroarylation of a series of 1,3-dienes with various phenols has been established through a combination of theoretical and experimental investigations, affording structurally diverse ortho-allyl phenols. DFT calculations show that the reaction proceeds through a borane-promoted protonation/Friedel-Crafts pathway involving a π-complex of a carbocation-anion contact ion pair. This protocol features simple and mild reaction conditions, broad functional-group tolerance, and low catalyst loading. The obtained ortho-allyl phenols could be further converted into flavan derivatives using B(C₆ F₅ )₃ with good cis diastereoselectivity. Furthermore, this transformation was applied in the late-stage modification of pharmaceutical compounds.

Recent advances in enantioselective gold catalysis

Interest in homogeneous gold catalysis has undergone a marked increase. As strong yet air- and moisture-tolerant π-acids, cationic gold(i) complexes have been shown to catalyze diverse transformations of alkenes, alkynes and allenes, opening new opportunities for chemical synthesis. The development of efficient asymmetric variants is required in order to take full advantage of the preparative potential of these transformations. During the last few years, the chemical community has achieved tremendous success in the area. This review highlights the updated progress (2011-2015) in enantioselective gold catalysis. The discussion is classified according to the π-bonds activated by gold(i), in an order of alkynes, allenes and alkenes. Other gold activation modes, such as σ-Lewis acid catalyzed reactions and transformations of diazo compounds are also discussed.

Chiral isoxazolidine-mediated stereoselective umpolung α-phenylation of methyl ketones

Asymmetric nucleophilic phenylation of N-alkoxyenamine with triphenylaluminium is achieved for the formation of enantioenriched α-phenyl ketones through a one-pot process.

Enantioselective CuH-Catalyzed Hydroacylation Employing Unsaturated Carboxylic Acids as Aldehyde Surrogates

The direct asymmetric copper hydride (CuH)-catalyzed coupling of α,β-unsaturated carboxylic acids to aryl alkenes to access chiral α-aryl dialkyl ketones is reported. A variety of substrate substitution patterns, sensitive functional groups, and heterocycles are tolerated in this reaction, which significantly expands the range of accessible products compared with existing hydroacylation methodology. Although mechanistic studies are ongoing, we propose that CuH-catalyzed silylation of unsaturated acids occurs to access a uniquely effective acyl electrophilic coupling partner.

Metal triflate promoted synthesis of naphthalenes

A synthetic route to derive the skeleton of naphthalenes starting with isovanillin is described with modest total yields via the key transformation of metal triflate-mediated intramolecular benzannulation of o-formyl or o-benzoyl allylbenzenes in MeNO₂ at rt.

Enantioselective Oxidative Rearrangements with Chiral Hypervalent Iodine Reagents

A stereoselective hypervalent iodine‐promoted oxidative rearrangement of 1,1‐disubstituted alkenes has been developed. This practically simple protocol provides access to enantioenriched α‐arylated ketones without the use of transition metals from readily accessible alkenes.

Bismuth(iii) triflate-catalysed tandem cyclisations towards complex polycyclic ethers

A series of complex polycyclic ethers have been synthesised under very mild conditions using a low catalyst loading of bismuth(iii) triflate.

Gold-catalyzed carboalkoxylations of 2-ethynylbenzyl ethers to form 1- and 3-substituted 2-methoxy-1-H-indenes: Brønsted acids versus gold catalysis

Selective synthesis of 1- and 3-substituted 2-methoxyindenes from the carboalkoxylations of 2-ethynylbenzyl ethers is described; the former is obtained efficiently with P(t-Bu)2(o-biphenyl)AuCl/NaBARF in DCM/MS 4 Å whereas the latter is produced preferably with P(t-Bu)2(o-biphenyl)AuCl/AgNTf2 in pre-dried DCM. Both 1- and 3-substituted 2-indenyl ethers are subjected to ozone oxidations to afford two distinct carbonyl products. Our new data indicate that 1-substituted 2-indenyl ethers are generated from gold catalysts whereas their 3-substituted analogues arise from Brønsted acids.

Design of pyrazolo-pyrrolo-pyrazines and pyrazolo-pyrrolo-diazepines via AuCl₃-catalyzed and NaH-supported cyclization of N-propargyl pyrazoles

A concise synthetic methodology for new heterocyclic scaffolds, such as pyrazolo-pyrrolo-pyrazine and pyrazolo-pyrrolo-diazepine skeletons, was developed. The key features of this method include (i) synthesis of pyrrole-derived α,β-alkynyl ketones, (ii) introduction of various substituents into the alkyne functionality by Sonogashira cross-coupling, (iii) synthesis of pyrazole units by the reaction of α,β-alkynyl compounds with hydrazine monohydrate, (iv) gold-catalyzed cyclization of pyrazoles with alkyne units, and (v) cyclization with NaH. Furthermore, this methodology allows various substituents to be introduced into all positions of the target compounds.

Dynamic control of chirality in phosphine ligands for enantioselective catalysis

Chirality plays a fundamental role in biology and chemistry and the precise control of chirality in a catalytic conversion is a key to modern synthesis most prominently seen in the production of pharmaceuticals. In enantioselective metal-based catalysis, access to each product enantiomer is commonly achieved through ligand design with chiral bisphosphines being widely applied as privileged ligands. Switchable phosphine ligands, in which chirality is modulated through an external trigger signal, might offer attractive possibilities to change enantioselectivity in a catalytic process in a non-invasive manner avoiding renewed ligand synthesis. Here we demonstrate that a photoswitchable chiral bisphosphine based on a unidirectional light-driven molecular motor, can be used to invert the stereoselectivity of a palladium-catalysed asymmetric transformation. It is shown that light-induced changes in geometry and helicity of the switchable ligand enable excellent selectivity towards the racemic or individual enantiomers of the product in a Pd-catalysed desymmetrization reaction.

Metal-free, one-pot, sequential protocol for transforming α,β-epoxy ketones to β-hydroxy ketones and α-methylene ketones

A new sequential, one-pot protocol for transforming 1,3-disubstituted 2,3-epoxy ketones to β-hydroxy ketones and α-methylene ketones has been developed. Reaction of epoxy ketones with boron trifluoride etherate (BF3·OEt2) generates the cationic intermediates by regioselective epoxide ring opening and an acyl shift. Then, a treatment of these cations with 2-aryl-1,3-dimethylbenzimidazolines (DMBIH) results in formation of 1,2-disubstituted 3-hydroxy ketones. DMBIH serves as a hydride donor in the second step of this process. Finally, the β-hydroxy ketones can be converted to 1,2-disubstituted 2-methylene ketones by treatment with methanesulfonic acid or a combination of methanesulfonyl chloride and triethylamine. Importantly, the sequential steps involved in formation of the α-methylene ketone products can be carried out in one pot.