A Multifunctional Organic–Inorganic Hybrid Structure Based on MnIII–Porphyrin and Polyoxometalate as a Highly Effective Dye Scavenger and Heterogenous Catalyst

Co-Assembly of Polyoxometalates and Porphyrins as Anode for High-Performance Lithium-Ion Batteries

Polyoxometalates (POMs) have been considered one of the most promising anode candidates for lithium-ion batteries (LIBs) in virtue of their high theoretical capacity and reversible multielectron redox properties. However, the poor intrinsic electronic conductivity, low specific surface area, and high solubility in organic electrolytes hinder their widespread applications in LIBs. Herein, a novel hybrid nanomaterial is synthesized by co-assembling POMs and porphyrins (PMo12/CoTPyP) through a facile solvothermal method. The POM clusters are stabilized by porphyrin units through electrostatic interactions, which simultaneously realize the uniform dispersion of POMs and porphyrin units. Benefiting from the generated sub-1 nm channels for fast ion transport and the synergistic effect between evenly distributed PMo12 clusters and high-conductive CoTPyP units, the LIB based on the optimized PMo12/CoTPyP anode exhibits significantly improved Li+ storage capability as well as superior rate and cycling performance. The results of density functional theory simulations further reveal that the co-assembly of PMo12 and CoTPyP can accelerate the mobility of Li+ and electrons, which in turn promotes the enhancement of LIBs performance. This work paves a strategy for synthesizing POMs-based anode materials with simultaneously high dispersibility, redox activity, and stability.

Effective oxygen activation on polyoxometalate-based hybrids for epoxidation of alkenes

Two polyoxometalate-based hybrids, [M(btap)3(H2O)3(HPW12O40)]·xH2O (M-PW, M = Co/Mn, btap = 3,5-bis(1',2',4'-triazol-1'-yl)pyridine) were synthesized. Co-PW exhibited higher activity and selectivity towards olefin epoxidation than Mn-PW due to the synergistic effect between CoII and PW, in which the Co centers activate O2 to ˙O2- and further binding of free H+ from PW affords the active peroxyacid.

A porous Anderson-type polyoxometalate-based metal-organic framework as a multifunctional platform for selective oxidative coupling with amines

Incorporating catalytic units into a crystalline porous matrix represents a facile way to build high-efficiency heterogeneous catalysts, and by rational design of the porous skeleton with appropriate building blocks the catalytic performance can be significantly enhanced for a series of organic transformations owing to the synergistic effect from the multicomponent and confined porous microenvironment around catalytically active sites. Herein, we demonstrate that the design and synthesis of a porous polyoxometalate-based metal-organic framework YL2(H2O)2[CrMo6O18(PET)2]·4H2O (POMOF-1) constructed from Anderson-type [CrMo6O18(PET)2] (PET = pentaerythritol), which can be employed as a multifunctional platform for synthesis of N-containing compounds via selective oxidative coupling with amines. POMOF-1 features microporous 1D channels defined by Y3+ and L, with [CrMo6O18(PET)2] arranged orderly between adjacent Lvia electrostatic interactions. Upon using POMOF-1 as a catalyst and H2O2 as an oxidant, a variety of amines could be effectively converted to value-added amides, imines and azobenzenes via the oxidative cross-coupling with alcohols or homo-coupling. In particular, POMOF-1 showed dramatically improved activity for the N-formylation reaction owing to the synergistic and confinement effect, with the yield of amides up to 95% and 4 times higher than that of homogeneous [CrMo6O18(PET)2]. Meanwhile, the oxidative homo-coupling of arylmethylamines and arylamines can be facilely tuned by adjustment of the amount of oxidant, solvent and additive, affording imines and azobenzenes in high selectivity and yield, respectively. POMOF-1 is robust and can be reused for 5 cycles with little loss of catalytic activity and structural integrity. The work demonstrates that the combination of catalytically active POMs with crystalline porous MOFs holds great potential to build robust and recyclable heterogeneous systems with enhanced activity and selectivity for multifunctional catalysis.

Efficiency and selectivity of cost-effective Zn-MOF for dye removal, kinetic and thermodynamic approach

Green synthesis of metal-organic frameworks (MOFs) has attracted a lot of attention as a crucial step for practical industrial applications. In this work, green synthesis of zinc(II) metal-organic framework (Zn-MOF) has been carried out at room temperature. The Zn metal (node) was extracted from spent domestic batteries, and the linker was benzene di-carboxylic acid (BDC). The characterization of the as-prepared Zn-MOF was accomplished by PXRD, FT-IR spectroscopy, SEM, TEM, TGA, and nitrogen adsorption at 77 K. All the characterization techniques strongly supported that as-synthesized Zn-MOF using metallic solid waste Zn is similar to that was reported in the literature. The as-prepared Zn-MOF was stable in water for 24 h without any changes in its functional groups and framework. The prepared Zn-MOF was tested for the adsorption of three dyes, two anionic dyes, aniline blue (AB), and orange II (O(II)) as well as methylene blue (MB), an example of cationic dye from aqueous solution. AB has the highest equilibrium adsorbed amount, qe, of value 55.34 mg g-1 at pH = 7 and 25 °C within 40 min. Investigation of the adsorption kinetics indicated that these adsorption processes could be described as a pseudo-second-order kinetic model. Furthermore, the adsorption process of the three dyes was described well by the Freundlich isotherm model. According to the thermodynamic parameters, the adsorption of AB on the prepared Zn-MOF was an endothermic and spontaneous process. In contrast, it was non-spontaneous and exothermic for the uptake of O(II) and MB. This study complements the business case development model of "solid waste to value-added MOFs."

Fast photocatalytic degradation of rhodamine B using indium-porphyrin based cationic MOF under visible light irradiation

A broad light-harvesting range and efficient charge separation are two main ways to enhance the visible photocatalytic performance of semiconductors. Herein, an ionic porphyrin MOF [In(TPyP)]·(NO3) (1) (TPyP = 5,10,15,20-tetrakis(4-pyridyl)-21H,23H-porphyrin) was synthesized via in situ metalation. The orderly arranged porphyrin photosensitizer and the internal electric field between the MOF host and NO3- guests enable effective visible light response and electron-hole separation. Consequently, the as-synthesized MOF shows efficient photocatalytic degradation of rhodamine B (RhB), methyl orange (MO) and methylene blue (MB) organic pollutants. It can degrade 99.07% of RhB within only 20 minutes under visible light irradiation (λ > 420 nm) with a high chemical reaction rate constant of 0.2400 min-1. The photocatalytic activity of the title MOF is more efficient than those of other reported MOFs, COFs and even inorganic semiconductors. The reusability, energy level, band gap, charge distribution and main degradation mechanisms of the photocatalyst were well studied.

Coordination Defect-Induced Frustrated Lewis Pairs in Polyoxo-metalate-Based Metal-Organic Frameworks for Efficient Catalytic Hydrogenation

Precise control of the structure and spatial distance of Lewis acid (LA) and Lewis base (LB) sites in a porous system to construct efficient solid frustrated Lewis pair (FLP) catalyst is vital for industrial application but remains challenging. Herein, we constructed FLP sites in a polyoxometalate (POM)-based metal-organic framework (MOF) by introducing coordination-defect metal nodes (LA) and surface-basic POM with abundant oxygen (LB). The well-defined and unique spatial conformation of the defective POM-based MOF ensure that the distance between LA and LB is at ~4.3 Å, a suitable distance to activate H2 . This FLP catalyst can heterolytically dissociate H2 into active Hδ- , thus exhibiting high activity in hydrogenation, which is 55 and 2.7 times as high as that of defect-free POM-based MOF and defective MOF without POM, respectively. This work provides a new avenue toward precise design multi-site catalyst to achieve specific activation of target substrate for synergistic catalysis.

Periodate-Mediated Aerobic Oxidation of Sulfides over a Bifunctional Porphyrin-polyoxometalate Catalyst: Photosensitized Singlet Oxygen Oxidation of Iodate to Periodate

Regeneration of terminal oxidants by molecular oxygen in metal-catalyzed oxidations of organic substrates has the advantage of avoiding the use of stoichiometric amounts of hazardous and/or expensive reagents to meet (some of) the green chemistry requirements. In the present study, photosensitized singlet oxygen oxidation of iodate to periodate has been used to regenerate the oxidant in polyoxometalate (POM)-catalyzed oxidation of sulfides to sulfoxides with periodate in water. To the best of our knowledge, it is the first report on singlet oxygen oxidation of iodate to periodate. In order to determine the contribution of photooxidation and oxidation pathways in the formation of sulfoxide, the oxidation of diphenyl sulfide with a very low reactivity toward aerobic photooxidation was studied; a sevenfold increase in the conversion of the sulfide to the diphenyl sulfoxide was observed for the reaction conducted in the presence of H2TMPyP-PW12O40/IO3-/O2/hν compared to that in the presence of H2TMPyP-PW12O40/O2/hν. Also, under the same conditions, a ca. 1.5-fold increase was observed in the case of methyl phenyl sulfide, which shows high reactivity toward both the oxidation and photooxidation reactions. A porphyrin-POM nanocomposite formed by the electrostatic immobilization of meso-tetra(N-methylpyridinium-4-yl)porphyrin (H2TMPyP) on PW12O40 was employed for the one-pot oxidation and photooxidation reactions. Field-emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), diffuse-reflectance UV-vis spectroscopy, thermal gravimetric analysis, and Fourier transform infrared were used to characterize the formation of the hybrid compound. An average particle size of 42 nm was estimated for H2TMPyP-PW12O40 from XRD peak broadening using the Scherrer equation. Also, FESEM images showed the formation of nearly spherical nanoparticles with a size of ca. 200 nm. The redshift of the Soret band of H2TMPyP upon immobilization on POM was attributed to strong N-H···O hydrogen-bond interactions between POM and porphyrin.

Additive-free selective oxidation of aromatic alcohols with molecular oxygen catalyzed by a mixed-valence polyoxovanadate-based metal-organic framework

Selective oxidation of alcohols to aldehydes is an industrially significant chemical transformation. Herein, we report a mixed-valence polyoxovanadate-based metal-organic framework (MOF), (H₂bix)₅{[Cd(bix)₂][VIV8VV7O₃₆Cl]₂}·3H₂O (V-Cd-MOF), for catalyzing the additive-free oxidation of a series of aromatic alcohols with high selectivity and in nearly quantitative yield to the corresponding aldehydes with O₂ as the oxidant. Experimental results, corroborated with density functional theory calculations, indicate that it is the synergistic operation of the dual active sites of the V^IV-O-V^V building units in the polyoxovanadate cluster that is responsible for the excellent catalytic performance observed: on the one hand, the exposed and readily accessible reduced V^IV site is believed to activate O₂, resulting in a reactive oxygen species for the subsequent activation and breaking of the substrate's C_α-H bond. On the other hand, the V^V site coordinates with the alcoholic O atom to facilitate the cleavage of the O-H bond. The catalyst can be recycled by centrifugation and re-used at least five times with uncompromised performance. To our knowledge, V-Cd-MOF represents the first example of a polyoxometalate-based MOF catalyst for additive-free selective oxidation of alcohol to aldehyde with O₂ as an oxidant.

Efficient removal of Hg0 in flue gas using a novel Sn-based porphyrin polymer

A Sn-based porphyrin polymer (TAPP(Sn)-FAC) synthesized in a mild condition was introduced for the Hg⁰ removal in flue gas. The properties characterization of materials revealed the two-dimensional sheet structure, an amorphous structure and high stability of TAPP(Sn)-FAC, and Sn was successfully incorporated into TAPP-FAC in the form of SnN. The removal performance of Hg⁰ under different conditions was investigated using a lab-scale fixed-bed reactor. TAPP(Sn)-FAC presented an excellent Hg⁰ removal efficiency from 100 °C to 250 °C, which can reach 8 mg/g of Hg⁰ capture capacity at 100 °C for 300 min. Besides, TAPP(Sn)-FAC had a strong sulfur and water resistance, and the presence of NO and O₂ had a facilitating effect for Hg⁰ removal. Moreover, the existence of Sn can enhance the Hg⁰ adsorption and oxidation capacity of TAPP(Sn)-FAC by promoting the electron transfer process. Furthermore, TAPP(Sn)-FAC presented an excellent chemical stability, which was a promising material in the Hg⁰ removal in flue gas.

Organic-Inorganic Porphyrinoid Frameworks for Biomolecule Sensing

Porphyrinoids and their analogous compounds play an important role in biosensing applications on account of their unique and versatile catalytic, coordination, photophysical, and electrochemical properties. Their remarkable arrays of properties can be finely tuned by synthetically modifying the porphyrinoid ring and varying the various structural parameters such as peripheral functionalization, metal coordination, and covalent or physical conjugation with other organic or inorganic scaffolds such as nanoparticles, metal-organic frameworks, and polymers. Porphyrinoids and their organic-inorganic conjugates are not only used as responsive materials but also utilized for the immobilization and embedding of biomolecules for applications in wearable devices, fast sensing devices, and other functional materials. The present review delineates the impact of different porphyrinoid conjugates on their physicochemical properties and their specificity as biosensors in a range of applications. The newest porphyrinoid types and their synthesis, modification, and functionalization are presented along with their advantages and performance improvements.

Structurally-New Hexadecanuclear Ni-Containing Silicotungstate with Catalytic Hydrogen Generation Activity

A structurally-new, carbon-free hexadecanuclear Ni-containing silicotungstate, [Ni₁₆(H₂O)₁₅(OH)₉(PO₄)₄(SiW₉O₃₄)₃]^19-, has been facilely synthesized using a one-pot, solution-based synthetic method systematically characterized by single-crystal X-ray diffraction and several other techniques. The resulting complex works as a noble-metal-free catalyst for visible-light-driven catalytic generation of hydrogen, by coupling with a [Ir(coumarin)₂(dtbbpy)][PF₆] photosensitizer and a triethanolamine (TEOA) sacrificial electron donor. Under minimally optimized conditions, a turnover number (TON) of 842 was achieved for TBA-Ni₁₆P₄(SiW₉)₃-catalyzed hydrogen evolution system. The structural stability of TBA-Ni₁₆P₄(SiW₉)₃ catalyst under photocatalytic conditions was evaluated by the mercury-poisoning test, FT-IR, and DLS measurements. The photocatalytic mechanism was elucidated by both time-solved luminescence decay and static emission quenching measurements.

Gigantic supramolecular assemblies built from dynamic hierarchical organization between inorganic nanospheres and porphyrins

Noncovalent ionic interactions between nanosized Keplerate-type capsules {Mo₁₃₂} and tetra-cationic porphyrins have been investigated in aqueous solution using small-angle X-ray scattering, ¹H NMR and photophysical methods. These complementary multiscale methods reveal the formation of large hybrid oligomers built from a short-range organization in which the cationic porphyrin is glued onto the large POM surface. The local structuring appears to be strongly dependent on the dye : {Mo₁₃₂} ratio changing the morphology of the oligomers from linear to dense aggregates.

Demystifying the roles of single metal site and cluster in CO2 reduction via light and electric dual-responsive polyoxometalate-based metal-organic frameworks

Photo- or electroreduction of carbon dioxide into highly valued products offers a promising strategy to achieve carbon neutrality. Here, a series of polyoxometalate-based metal-organic frameworks (M-POMOFs) were constructed by metalloporphyrins [tetrakis(4-carboxyphenyl)-porphyrin-M (M-TCPPs)] and reductive POM for photo- and electrocatalytic carbon dioxide reductions (PCR and ECR, respectively), and the mysteries between the roles of single metal site and cluster in catalysis were disclosed. Iron-POMOF exhibited an excellent selectivity (97.2%) with high methane production of 922 micromoles per gram in PCR, together with superior Faradaic efficiency for carbon dioxide to carbon monoxide (92.1%) in ECR. The underlying mechanisms were further clarified. Photogenerated electrons transferred from iron-TCPP to the POM cluster for methane generation under irradiation, while the abundant electrons flowed to the center of iron-TCPP for carbon monoxide formation under the applied electric field. The specific multielectron products generated on iron-POMOF through switching driving forces to control electron flow direction between single metal site and cluster catalysis.

Two Types of Subgroup-Valence Heteroatoms (PIII, TeIV) Synergistically Controlling Octa-CeIII-Encapsulated Heteropolyoxotungstate and Its Electrochemical Recognition Properties

Rapid development of the synthetic chemistry of polyoxometalates (POMs) has greatly driven the generation of structurally variable innovative POM-based materials. Herein, we synthesized a novel P^III and Te^IV synergistically controlling octa-Ce^III-encapsulated heteropolyoxotungstate [H₂N(CH₃)₂]₁₁K₂Na₆H₁₁[Ce₈(CH₃COO)₂(HP^IIIO₃)₂W₈O₂₀(H₂O)₁₂(B-β-TeW₈O₃₀)₂(B-α-TeW₈O₃₁)₄]·64H₂O (1). Its distinctive anion skeleton [Ce₈(CH₃COO)₂(HP^IIIO₃)₂W₈O₂₀(H₂O)₁₂(B-β-TeW₈O₃₀)₂(B-α-TeW₈O₃₁)₄]^30- is built by two tetra-vacancy [B-β-TeW₈O₃₀]^8- and four tetra-vacancy [B-α-TeW₈O₃₁]^10- moieties linked through an inorganic-organic hybrid [Ce₈(CH₃COO)₂(HP^IIIO₃)₂W₈O₂₀(H₂O)₁₂]²⁶⁺ {Ce₈P₂W₈} cluster core. Interestingly, {Ce₈P₂W₈} is assembled from four [W₂O₁₁]^10- groups and two [HP^IIIO₃]^2- anions and eight Ce³⁺ ions. Besides, 1 was further composited with carboxylated multiwalled carbon nanotube (CMCN), resulting in a bi-component 1/CMCN nanocomposite. An electrochemical recognition platform (named as 1/CMCN/GCE) was built by modifying 1/CMCN on a glassy carbon electrode (GCE) for electrochemical detection of dopamine (DPA) at physiological pH (pH = 7.0). The findings have shown that 1/CMCN/GCE exhibits a good detection limit of 4.95 nM for DPA. This work provides considerable inspiration to promote innovative and rational structure designs of POM-based materials and expand their applications to electrochemical and biological detection fields.

Hybrid Materials Based on Keggin Phosphotungstate and Bipyridine with Valuable Hydrophobic and Redox Properties

A thorough investigation of two novel hybrid materials, namely, (2,2'-Hbpy)₃[PW₁₂O₄₀] and (4,4'-H₂bpy)_1.5[PW₁₂O₄₀]·1.5H₂O built from Keggin phosphotungstic acid (PTA) and bipyridine, describes the impact of bipyridine isomers in their formation and physicochemical properties. The hybrids' formation was confirmed by powder X-ray diffraction, while infrared spectroscopy (IR) proved the polyoxometalate (POM) structural preservation. The stoichiometric composition and thermal stability of the hybrids were solved by thermogravimetric analysis-mass spectrometry, which also revealed newly acquired hydrophobic properties. Raman and IR spectroscopies demonstrated that the POM skeleton units in both hybrids were distorted compared to the POM in PTA, which induced a decrease of their reduction potentials as observed by diffuse reflectance ultraviolet-visible spectroscopy (DR-UV-vis). The hybrids' acidity was assessed by ammonia temperature-programmed desorption, which showed no remaining acid sites compared to the strong acidic character of the pristine PTA. The properties of the hybrids were tested in the epoxidation of cyclooctene in the presence of H₂O₂. The reaction was boosted when the hybrids were pre-activated with H₂O₂.

Switching Excited State Distribution of Metal-Organic Framework for Dramatically Boosting Photocatalysis

Photosensitization associated with electron/energy transfer represents the central science of natural photosynthesis. Herein, we proposed a protocol to dramatically improve the sensitizing ability of metal-organic frameworks (MOFs) by switching their excited state distribution from ³ MLCT (metal-to-ligand charge transfer) to ³ IL (intraligand). The hierarchical organization of ³ IL MOFs and Co/Cu catalysts facilitates electron transfer for efficient photocatalytic H₂ evolution with a yield of 26 844.6 μmol g^-1 and CO₂ photoreduction with a record HCOOH yield of 4807.6 μmol g^-1 among all the MOF photocatalysts. Systematic investigations demonstrate that strong visible-light-absorption, long-lived excited state and ingenious multi-component synergy in the ³ IL MOFs can facilitate both interface and intra-framework electron transfer to boost photocatalysis. This work opens up an avenue to boost solar-energy conversion by engineering sensitizing centers at a molecular level.

Two Copper-Containing Polyoxometalate-Based Metal-Organic Complexes as Heterogeneous Catalysts for the C-H Bond Oxidation of Benzylic Compounds and Olefin Epoxidation

Using a one-pot assembly method, two novel copper-containing Keggin-type polyoxometalates (POMs)-based metal-organic complexes, that is, [Cu^II₂(pbba)₂NO₃^-(H₂O)₂(PW₁₂O₄₀)]·3H₂O [PW₁₂-Cu-pbba, H₂pbba = 1,1'-(1,4-phenylene-bis(methylene))-bis(pyridine-3-carboxylic acid)] and [Cu^II₂(pbba)₂(H₂O)₂(GeW₁₂O₄₀)]·3H₂O (GeW₁₂-Cu-pbba), were successfully synthesized. These two complexes are isostructural, differing only in their POM components. They are applicable as heterogeneous catalysts for the C-H bond oxidation of benzylic compounds and olefin epoxidation under mild conditions, with oxygen as the oxidant and isobutyraldehyde as the coreductant. The catalytic activity of PW₁₂-Cu-pbba was superior to that of GeW₁₂-Cu-pbba. Under the optimal conditions, PW₁₂-Cu-pbba catalyzed the oxidation of indane into 1-indanone with an 81% yield and >99% selectivity within 48 h. As heterogeneous catalysts, both complexes demonstrated excellent recoverability and high stability and could be stably reused five times without significant activity loss.

Facile high yield, excellent catalytic performance of polyoxometalate-based lanthanide phosphine oxide complexes: Syntheses, structures, photocatalysis and THz spectra

Water pollution, which continuously threatens human health and the sustainable development of society, has become a major concern. Photocatalytic degradation is an effective strategy to remove organic dyes from wastewater. For this strategy, it is crucial to select the appropriate catalyst. Using triphenylphosphine oxide (OPPh₃) as the ligand, phosphomolybdic acid as the anion template, three new lanthanide complexes [Ln(OPPh₃)₄(H₂O)₃](PMo₁₂O₄₀)∙4C₂H₅OH (1-3) (Ln = Sm, Gd, Tb) were synthesized. The raw materials for the reaction are cheap and readily available. The convenient synthesis method is environmentally friendly, with high yield (70%-80%). Complexes 1-3 are all seven-coordinated mononuclear structures centered on lanthanide ions, [PMo₁₂O₄₀]^3- anions and solvent molecules are not coordinated with metal ions. These mononuclear structures eventually form complicated 3D supramolecular structures through hydrogen bonds, Mo-O ^… π or C-H ^… π weak interactions. Complexes 1-3 photocatalytic degradation of MB have high removal rates, as catalysts have enough stability to be reused, and can be used as excellent catalysts for the degradation of dye molecules in sewage. Among them, the removal rate of MB by photodegradation of complex 2 was highest (99.50%). In addition, the effects of different initial concentrations of MB solution and different types of organic dyes on the photocatalysis experiment were investigated. The photocatalytic reaction mechanism of complexes 1-3 was also studied. Due to the similar structures of complexes 1-3, they have almost the same THz absorption spectra with different absorption intensity, which may be attributed to the difference of the number of weak interactions. Therefore, terahertz spectroscopy can be used as a sensitive method to distinguish and determine small differences between lanthanide-organic complexes. This is the first time that this spectrum has been used to characterize lanthanide phosphine oxide complexes modified by [PMo₁₂O₄₀]^3-.

A Keggin-type polyoxometalate-based metal-organic complex as a highly efficient heterogeneous catalyst for the selective oxidation of alkylbenzenes

The direct oxidation of C-H bonds in organic materials into necessary oxygen-containing compounds under mild conditions has attracted increasing attention. A Keggin-type polyoxometalate-based metal-organic complex (MOC), [CuII4Cu^I(H₂trz)₄(C₂O₄)(H₂O)₄(H₃PW_11.18CuII0.82O₄₀)]·8H₂O (1) (H₃trz = 1,2,4-triazole), was designed and synthesized under hydrothermal conditions, and was structurally characterized by single crystal X-ray diffraction, PXRD, IR spectroscopy, TGA, and XPS. Complex 1 is a 3D 4,6,8-connected architecture derived from [Cu₅(H₂trz)₄(C₂O₄)₂(H₂O)₂]_n units and [PW_11.18Cu_0.82O₄₀]^6- anions, which can catalytically oxidize various types of alkylbenzenes. Gas chromatographic analysis showed that complex 1 as a heterogeneous catalyst could effectively catalyze the oxidation of diphenylmethane with 93% conversion and 99% selectivity within 6 h. In addition, the conversion for the catalytic oxidation of ethylbenzene was 96% with 99% selectivity. Compared with some reported catalysts, complex 1 exhibited a better catalytic effect and lower reaction time. Meanwhile, the catalytic oxidation of other benzyl derivatives with complex 1 was also investigated, which indicated that complex 1 possessed excellent catalytic performance.

PDMS-coated γCD-MOF solid-phase microextraction fiber for BTEX analysis with boosted performances

Owing to the ubiquitous occurrence and chemotoxicity of BTEX (benzene, toluene, ethylbenzene and xylene), the development of stable and accurate analysis methods that can assess environment risks and can generate monitoring data rapidly is urgent. In this work, a new strategy was proposed for efficient detection of BTEX. By creatively utilizing thermal deposition method, a robust SPME fiber was fabricated, where the γCD-MOF acted as the adsorbent, while PDMS functionalized as the adhesive and protective coating. Benefiting from the protection of PDMS, the γCD-MOF fiber presented significantly better extraction performance and exhibited long-term structural stabilities in aqueous or methanol samples up to a week. The stable and improved properties of γCD-MOF demonstrated that the PDMS protected the MOF components from the adverse effects of solvent. The detection limits of PDMS modified γCD-MOF fiber for BTEX was as low as 0.13-0.29 ng L^-1 that accompanied with wide linear range of 1-1000 ng L^-1, which was significantly superior to commercial PDMS fiber and other MOF-based fibers. Besides, the feasibility of the proposed method was verified by the quantitative determination of BTEX in real water samples. This work presents an effective strategy for creating ultrasensitive and stable SPME fibers based on γCD-MOF for applications in aqueous samples or other poor solvent.

Tuning magnetic properties by crystal engineering in a family of coordination polymers based on Ni(ii) sulphates

A new family of hybrid organic–inorganic layered materials based on nickel sulfates was synthesized using a one-pot, solvent-free synthetic approach using 1,2-phenylenediamine (OPD), 1,3-phenylenediamine (MPD) and 1,4-phenylenediamine (PPD).

Organic–inorganic hybrid phosphite-participating S-shaped penta-CeIII incorporated tellurotungstate as electrochemical enzymatic hydrogen peroxide for β-D-glucose detection

Polyoxometalate chemistry has made rapid advances in innovative structural chemistry. The lower valence state and lone electron pair effect of subgroup-valence heteroatom Te(IV) can be introduced into the tungsten-oxygen system...

POM-based porous supramolecular framework for the efficient sulfide-sulfoxide transformation with low molar O/S ratio

The selective oxidation of organic sulfides is a pivotal avenue to prepare sulfoxides that can act as synthetic intermediates of fine chemicals, bioactive molecules, and asymmetric catalysis ligands. To construct...

A self-assembly solvothermal synthesis of SiMoVn@[Cu6O(TZI)3(H2O)6]4·nH2O for the efficient selective oxidation of various alkylbenzenes

A series of SiMoVn@rht-MOF-1 were isolated via a one-pot self-assembly solvothermal synthesis, exhibiting effective catalytic activity and excellent recyclability.

Carbazole-based bis-imidazole ligand-involved synthesis of inorganic–organic hybrid polyoxometalates as electrochemical sensors for detecting bromate and efficient catalysts for selective oxidation of thioether

Considering the potential application on preparing electrode and catalyst materials of inorganic–organic hybrid polyoxometalates, a bis-imidazole ligand with carbazole as a connector, 3,6-di(1H-imidazol-1-yl)-9H-carbazole (L), was used for preparing inorganic–organic hybrid polyoxometalates. As a result, three complexes formulated by [NiL₂(Mo₂O₇)] (1), [Cu(H₂O)₂(HL)₂ (β-Mo₈O₂₆)]·H₂O (2) and [Ni₂(H₂O)₄L₂ (CrMo₆(OH)₅O₁₉)]·6H₂O (3) were obtained successfully. Structural analysis indicated that the different polyoxoanions and metal ions showed important influences on the formation of structures. In the presence of Ni²⁺ ions and heptamolybdate, a 2D network constructed from Ni²⁺ ions and L ligands was formed in complex 1, in which the [Mo₄O₁₄]⁴⁻ polyoxoanions were encapsulated. But the use of Cu²⁺ ions led to a 1D chain of complex 2, which was composed of [β-Mo₈O₂₆]⁴⁻ polyoxoanions and mononuclear {CuL₂} units. By utilizing [CrMo₆(OH)₅O₁₉]⁴⁻ as the inorganic building block, complex 3 showed a 2D (4, 4)-connected layer. Complexes 1–3 could be employed as electrode materials for sensing bromate with the limits of detection of 0.315 μM for 1, 0.098 μM for 2 and 0.551 μM for 3. Moreover, these complexes showed efficient catalytic activity for the selective oxidation of thioethers.

Three inorganic–organic hybrid polyoxometalates were prepared using a bis-imidazole ligand featuring carbazole as a connector, exhibiting not only diverse structures, but also good electrochemical sensing activities for bromate, as well as efficient catalytic performances for oxidation of thioether.

Polyoxometalate Interlayered Zinc-Metallophthalocyanine Molecular Layer Sandwich as Photocoupled Electrocatalytic CO2 Reduction Catalyst

Developing efficient and robust heterogeneous metallophthalocyanine electrocatalysts for CO₂ reduction remains a challenge. Here, a general synthetic method of zinc-metallophthalocyanine (MPc) molecular layer/polyoxometalate (POM) sandwich lamellar material is developed, and thus improved performance of electrocatalytic and photocoupled electrocatalytic CO₂ reduction is achieved. The incorporation of POM could prevent the packing of MPc molecular layers from aggregation, which would be favorable to the exposure of active sites. The molecular layer sandwich catalyst presents superior CO₂ reduction activity, delivering the highest CO Faradaic efficiency (FE_CO) of 96.1% at -0.7 V vs RHE in dark field. Under light irradiation, over 93% FE_CO is achieved in a broad potential range from -0.6 to -0.9 V vs RHE with a maximum of 96.2%, and the carbon monoxide turnover frequency could exceed 2060 h^-1. Photoelectrochemical tests and luminescence characterizations reveal the molecular layer is beneficial for carrier separation during light irradiation; density functional theory calculations and electron paramagnetic resonance indicated a 2-fold enhancement of the external light field on the catalytic performance.

Porphyrins and Polyoxometalate Scaffolds

Polyoxometalates (POMs) can act as unique reservoirs for multiple electron transfers. As POMs display only weak absorption in the visible spectrum, they can be associated with chromophores such as porphyrins and porphyrin antennae. In this Minireview, the research dedicated to the combination of porphyrins and polyoxometalates is put in context and the state of the art identifying the challenges addressed in the optimization of hybrid materials for applications is detailed.

Hexameric to Trimeric Lanthanide-Included Selenotungstates and Their 2D Honeycomb Organic-Inorganic Hybrid Films Used for Detecting Ochratoxin A

Two types of organic-inorganic hybrid structure-related lanthanide (Ln)-included selenotungstates (Ln-SeTs) [H₂N(CH₃)₂]₁₁Na₇[Ce₄(H₂PTCA)₂(H₂O)₁₂(HICA)]₂[SeW₄O₁₇]₂[W₂O₅]₄[SeW₉O₃₃]₄·64H₂O (1, H₃PTCA = 1,2,3-propanetricarboxylic acid, H₂ICA = itaconic acid) and [H₂N(CH₃)₂]₆Na₄[Ln₄SeW₈(H₂O)₁₄(H₂PTCA)₂O₂₈] [SeW₉O₃₃]₂·31H₂O [Ln = Pr³⁺ (2), Nd³⁺ (3)] were obtained by Ln nature control. The primary frameworks of 1-3 are composed of trivacant Keggin-type [B-α-SeW₉O₃₃]^8- and [SeW₄O_m]^n- [Ln = Ce³⁺ (1), m = 17, n = 6; Ln = Pr³⁺ (2), Nd³⁺ (3), m = 18, n = 8] fragments bridged by organic ligands and Ln clusters. Intriguingly, Ln nature results in the degradation of hexameric 1 to trimeric 2-3. Besides, 1@DMDSA and 3@DMDSA composites (DMDSA·Cl = dimethyl distearylammonium chloride) were prepared through the cation exchange method, which were then reorganized to form two-dimensional (2D) honeycomb thin films by the breath figure method. Using these honeycomb thin films as electrode materials, the aptasensors were further established by utilizing methylene blue as an indicator and cDNA and Au nanoparticles as signal amplifiers to enhance the response signal so as to realize the purpose of ochratoxin A (OTA) detection. This work provides a new platform for detecting OTA and explores the application potential of POM-based composites in biological and clinical analyses.

Recent Advances in Catalytic Confinement Effect within Micro/Meso-Porous Crystalline Materials

Micro/meso-porous crystalline materials with a well-defined pore structure, such as zeolites, carbon nanotubes, and metal-organic frameworks, are of great significance in the development of catalytic systems for scientific and industrial demands. The confinement effect aroused by pore features of porous crystalline materials has triggered great interest in heterogeneous catalysis. Catalytic reactions in confined spaces exhibit unique behaviors compared to those observed on bulk materials. More interestingly, chemical reactivity can be modulated in different ways by the confinement effect, despite the fact that the mechanism on how the confinement effect changes the reaction remains unclear. In this review, a systematic discussion and fundamental understanding is provided concerning the concept of confinement effect, highlighting the impact of confinement effects on diffusion, adsorption/desorption, and catalytic reaction in typical micro/meso-porous crystalline materials, including zeolites, carbon nanotubes, and metal-organic frameworks. Relevant studies demonstrate that confinement effect affords not only shape selectivity against reactants/products, but also modulates surface electron distribution of active species confined within porous environments, thereby successively affecting the catalytic reactivity, selectivity, and stability. This review provides a useful guide for researchers attempting to design excellent porous crystalline catalysts based on the concept of confinement effect in heterogeneous catalysis.

Polyoxometalate-Incorporated Framework as a Heterogeneous Catalyst for Selective Oxidation of C-H Bonds of Alkylbenzenes

Developing new catalysts for highly efficient and selective oxidation of saturated C-H bonds is significant due to their thermodynamic strength. Via incorporation of PW₁₂O₄₀^3-, pyridine-2,5-dicarboxylic acids (pydc), and Fe(III) ions into one framework, a new polyoxometalate-based metal-organic framework, [HFe₄O₂(H₂O)₄(pydc)₃PW₁₂O₄₀]·10.5H₂O (FeW-PYDC), was successfully prepared by a hydrothermal method. Interestingly, FeW-PYDC features a three-dimensional porous structure with {Fe₄O₂} interconnecting with PW₁₂O₄₀^3- units. FeW-PYDC displayed excellent performance in the selective oxidation of C-H bonds of alkylbenzenes with high conversion (95.7%) and selectivity (96.6%). As an effective heterogeneous catalyst, FeW-PYDC demonstrates good reusability and structural stability.

Defective Hierarchical Pore Engineering of a Zn-Ni MOF by Labile Coordination Bonding Modulation

The construction and modulation of hierarchical pore structure in metal-organic frameworks (MOFs) has become a hot topic owing to the advantages of hierarchical pore MOFs (HP-MOFs) in matter storage and mass transfer related applications. Herein, we report the engineering of crystalline defect in a bimetallic MOF for the construction and tuning of HP-MOF. A microporous MOF system showing metal-center-dependent water stability, namely, {[M₃F(bdc)₃ tpt] (solvents)}_n (M = Zn²⁺ and Ni²⁺, H₂bdc = 1,4-benzenedicarboxylic acid, tpt = 2,4,6-tris(4-pyridyl)triazine), was utilized as a platform for the construction of HP-MOF. By tuning the Zn²⁺/Ni²⁺ ratio in the reactant, a bimetallic MOF with a highly tunable Zn²⁺/Ni²⁺ ratio could be obtained. The relatively labile Zn²⁺-based coordination bonding in the bimetallic MOF could be readily and targeted broken through water treatment for the engineering of crystalline defects-based hierarchical pore structure. The resultant HP-MOF reveals a dramatically increased pore volume with the presence of mesopore and macropore. In addition, the anionic framework of HP-MOF could be utilized for the selective adsorption of a cationic dye methylene blue, and a relatively high capacity (250 mg·g^-1, five times compared with the pristine microporous MOF) could be achieved.

A Copper-Containing Polyoxometalate-Based Metal-Organic Framework as an Efficient Catalyst for Selective Catalytic Oxidation of Alkylbenzenes

A copper-containing polyoxometalate-based metal-organic framework (POMOF), Cu^I₁₂Cl₂(trz)₈[HPW₁₂O₄₀] (HENU-7, HENU = Henan University; trz = 1,2,4-triazole), has been successfully synthesized and well-characterized. In addition, the excellent catalytic ability of HENU-7 has been proved by the selective oxidation of diphenylmethane. Under the optimal conditions, the diphenylmethane conversion obtained over HENU-7 is 96%, while the selectivity to benzophenone is 99%, which outperforms most noble-metal-free POM-based catalysts. Moreover, HENU-7 is stable to reuse for five runs without an obvious loss in activity and also can catalyze the oxidation of different benzylic C-H with satisfactory conversions and selectivities, which implied the significant catalytic activity and recyclability.

α-γ-Type [Mo8O26]4--Containing Metal-Organic Complex Possessing Efficient Catalytic Activity toward the Oxidation of Thioether Derivatives

In this work, a new α-γ-type [Mo₈O₂₆]^4- anion was first synthesized and characterized by single-crystal X-ray diffraction analysis and was obtained by introducing molybdate to the synthesis of metal-organic complex (MOC) under hydrothermal conditions. An octamolybdate-based MOC, namely, {[Cu₈(H₂O)₆](dpyh)₄(α-γ-Mo₈O₂₆) }·(β-Mo₈O₂₆)·8.5H₂O (H₂dpyh = N,N-bis(3-pyrazolamide)-1,2-hexahydrobenzene), was obtained. The α-γ-type [Mo₈O₂₆]^4- anion was composed of four MoO₆ octahedra and four MoO₅ trigonal bipyramids by sharing their edges and corners. The title complex exhibited a 1D structure in which an α-γ-type [Mo₈O₂₆]^4- anion was connected with [Cu₄(dpyh)₂] units in a staggered manner. Under optimized conditions, complex 1 as the catalyst can achieve a highly efficient conversion (more than 99%) of thioanisole within 30 min and above 99% selectivity toward sulfoxide. Furthermore, efficient catalytic oxidation of thioether derivatives was also performed with 1 as the catalyst. In addition, the stable electrochemical sensing performance and adsorption capacity toward organic dyes were tested.

Multifunctionality of weak ferromagnetic porphyrin-based MOFs: selective adsorption in the liquid and gas phase

Ferromagnetic [Ni₅(H₂TCPP)₂O(H₂O)₄]·nS exhibits selective adsorption towards cationic dyes in solution and gas separation calculations predict promising values for gas mixtures.