Iron-catalyzed intramolecular allylic C-H amination

Strategies and Mechanisms of First-Row Transition Metal-Regulated Radical C-H Functionalization

Radical C-H functionalization represents a useful means of streamlining synthetic routes by avoiding substrate preactivation and allowing access to target molecules in fewer steps. The first-row transition metals (Ti, V, Cr, Mn, Fe, Co, Ni, and Cu) are Earth-abundant and can be employed to regulate radical C-H functionalization. The use of such metals is desirable because of the diverse interaction modes between first-row transition metal complexes and radical species including radical addition to the metal center, radical addition to the ligand of metal complexes, radical substitution of the metal complexes, single-electron transfer between radicals and metal complexes, hydrogen atom transfer between radicals and metal complexes, and noncovalent interaction between the radicals and metal complexes. Such interactions could improve the reactivity, diversity, and selectivity of radical transformations to allow for more challenging radical C-H functionalization reactions. This review examines the achievements in this promising area over the past decade, with a focus on the state-of-the-art while also discussing existing limitations and the enormous potential of high-value radical C-H functionalization regulated by these metals. The aim is to provide the reader with a detailed account of the strategies and mechanisms associated with such functionalization.

[Fe(NCMe)6](BF4)2 is a bifunctional catalyst for styrene aziridination by nitrene transfer and heterocycle expansion by subsequent dipolar insertion

The solvated iron(II) salt [Fe(NCMe)6](BF4)2 (Me = methyl) is shown to be a bifunctional catalyst with respect to aziridination of styrene. The salt serves as an active catalyst for nitrene transfer from PhINTs to styrene to form 2-phenyl-N-tosylaziridine (Ph = phenyl; Ts = tosyl, -S{O}2-p-C6H4Me). The iron(II) salt also acts as a Lewis acid in non-coordinating CH2Cl2 solution, to catalyze heterolytic CN bond cleavage of the aziridine and insertion of dipolarophiles. The 1,3-zwitterionic intermediate is presumably supported by interaction of the metal dication with the anion, and by resonance stabilization of the carbocation. Nucleophilic dipolarophiles then insert to give a five-membered heterocyclic ring. The result is a two-step cycloaddition, formally [2 + 1 + 2], that is typically regiospecific, but not stereospecific. This reaction mechanism was confirmed by conducting a series of one-step, [3 + 2] additions of unsaturated molecules into pre-formed 2-phenyl-N-tosylaziridine, also catalyzed by [Fe(NCMe)6](BF4)2. Relevant substrates include styrenes, carbonyl compounds and alkynes. These yield five-membered heterocylic rings, including pyrrolidines, oxazolidines and dihydropyrroles, respectively. The reaction scope appears limited only by the barrier to formation of the dipolar intermediate, and by the nucleophilicity of the captured dipolarophile. The bifunctionality of an inexpensive, earth-abundant and non-toxic catalyst suggests a general strategy for one-pot construction of heterocyclic rings, as demonstrated specifically for pyrrolidine ring formation.

Selenium-catalyzed allylic C-H phosphoramidation of alkenes

We report herein a synthesis of allylic phosphoramidates from alkenes by selenium-catalyzed allylic C-H derivatization. This method features mild conditions, broad substrate scope, and high functional group tolerance, enabling late-stage modification of a number of complex substrates. In addition, this protocol was applied to modify caryophyllene and produced a photoaffinity probe capable of proteomic target labeling in live HeLa cells.

γ-Amino Alcohols via Energy Transfer Enabled Brook Rearrangement

In the long-standing quest to synthesize fundamental building blocks with key functional group motifs, photochemistry in the recent past has comprehensively established its attractiveness. Amino alcohols are not only functionally diverse but are ubiquitous in the biologically active realm of compounds. We developed bench-stable bifunctional reagents that could then access the sparsely reported γ-amino alcohols directly from feedstock alkenes through energy transfer (EnT) photocatalysis. A designed 1,3-linkage across alkenes is made possible by the intervention of a radical Brook rearrangement that takes place downstream to the EnT-mediated homolysis of our reagent(s). A combination of experimental mechanistic investigations and detailed computational studies (DFT) indicates a radical chain propagated reaction pathway.

Synthesis of N-Tosyl Allylic Amines from Substituted Alkenes via Vanadoxaziridine Catalysis

Herein, we report the catalytic allylic amination of α-methylalkenes with V2O3Dipic2(HMPA)2 and chloramine T as the quantitative source of N. The reaction works with high yields and stereoselectivities for α-methylalkenes. A proposed tosylnitrene-free catalytic cycle involving the formation of vanadoxaziridine complex 1 as the active catalyst and aminovanadation across the substrate as the rate-determining step has been proposed. Initial kinetic and competition experiments provide evidence for the proposed mechanism.

Intramolecular C-H bond amination catalyzed by myoglobin reconstituted with iron porphycene

C-H bond amination is an effective way to obtain nitrogen-containing products. In this work, we demonstrate that myoglobin reconstituted with iron porphycene (rMb(FePc)) catalyzes intramolecular C(sp3)-H bond amination of arylsulfonyl azides to yield corresponding sultam analogs. The total turnover number of rMb(FePc) is up to 5.7 × 104 for the C-H bond amination of 2,4,6-triisopropylbenzenesulfonyl azide. Moreover, rMb(FePc) exhibits higher selectivity for the desired C-H bond amination than the competing azide reduction compared to native myoglobin. Kinetic studies reveal that the kcat value of rMb(FePc) is 4-fold higher than that of native myoglobin. Furthermore, H64A, H64V and H64I mutants of rMb(FePc) enhance the turnover number (TON) and enantioselectivity for the C-H bond amination of 2,4,6-triethylbenzenesulfonyl azide. The present findings indicate that iron porphycene is an attractive artificial cofactor for myoglobin toward the C-H bond amination reaction.

Solvent Effects on the Chemo- and Site-Selectivity of Transition Metal-Catalyzed Nitrene Transfer Reactions: Alternatives to Chlorinated Solvents

Transition metal-catalyzed, non-enzymatic nitrene transfer (NT) reactions to selectively transform C-H and C=C bonds to new C-N bonds are a powerful strategy to streamline the preparation of valuable amine building blocks. However, many catalysts for these reactions use environmentally unfriendly solvents that include dichloromethane, chloroform, 1,2-dichloroethane and benzene. We developed a high-throughput experimentation (HTE) protocol for heterogeneous NT reaction mixtures to enable rapid screening of a broad range of solvents for this chemistry. Coupled with the American Chemical Society Pharmaceutical Roundtable (ACSPR) solvent tool, we identified several attractive replacements for chlorinated solvents. Selected catalysts for NT were compared and contrasted using our HTE protocol, including silver supported by N-dentate ligands, dinuclear Rh complexes and Fe/Mn phthalocyanine catalysts.

Regio- and Enantioselective Catalytic δ-C-H Amidation of Dioxazolones Enabled by Open-Shell Copper-Nitrenoid Transfer

Controlling regio- and enantioselectivity in C-H functionalization reactions is of paramount importance due to their versatile synthetic utilities. Herein, we describe a new approach for the asymmetric δ-C(sp³)-H amidation catalysis of dioxazolones using a Cu(I) precursor with a chiral bisoxazoline ligand to access six-membered lactams with high to excellent regio- and enantioselectivity (up to >19:1 rr and >99:1 er). Combined experimental and computational mechanistic studies unveiled that the open-shell character of the postulated Cu-nitrenoids enables the regioselective hydrogen atom abstraction and subsequent enantio-determining radical rebound of the resulting carbon radical intermediates. The synthetic utility of this asymmetric cyclization was demonstrated in the diastereoselective introduction of additional functional groups into the chiral δ-lactam skeleton as well as in the rapid access to biorelevant azacyclic compounds.

Iron-Catalyzed Intermolecular C-N Cross-Coupling Reactions via Radical Activation Mechanism

A concept for intermolecular C-N cross-coupling amination has been discovered using tetrazoles and aromatic and aliphatic azides with boronic acids under iron-catalyzed conditions. The amination follows an unprecedented metalloradical activation mechanism that is different from traditional metal-catalyzed C-N cross-coupling reactions. The scope of the reaction has been demonstrated by the employment of a large number of tetrazoles, azides, and boronic acids. Moreover, several late-stage aminations and a short synthesis of a drug candidate have been showcased for further synthetic utility. Collectively, this iron-catalyzed C-N cross-coupling should have wide applications in the context of medicinal chemistry, drug discovery, and pharmaceutical industries.

Kukhtin-Ramirez-Reaction-Inspired Deprotection of Sulfamidates for the Synthesis of Amino Sugars

Herein, we present a mild strategy for deprotecting cyclic sulfamidates via the Kukhtin-Ramirez reaction to access amino sugars. The method features the removal of the sulfonic group of cyclic sulfamidates, which occurs through an N-H insertion reaction that implicates the Kukhtin-Ramirez adducts, followed by a base-promoted reductive N-S bond cleavage. The mild reaction conditions of the protocol enable the formation of amino alcohols including analogs that bear multiple functional groups.

Iron-Catalyzed Intermolecular Amination of Benzylic C(sp3)-H Bonds

A catalytic system for intermolecular benzylic C(sp³)-H amination is developed utilizing 1,2,3,4-tetrazole as a nitrene precursor via iron catalysis. This method enables direct installation of 2-aminopyridine into the benzylic and heterobenzylic position. The method selectively aminates 2° benzylic C(sp³)-H bond over the 3° and 1° benzylic C(sp³)-H bonds. Experimental studies reveal that the C(sp³)-H amination undergoes via the formation of a benzylic radical intermediate. This study reports the discovery of new method for 2-pyridine substituted benzylamine synthesis using inexpensive, biocompatible base metal catalysis that should have wide application in the context of medicinal chemistry and drug discovery.

An iron(ii)-based metalloradical system for intramolecular amination of C(sp2)-H and C(sp3)-H bonds: synthetic applications and mechanistic studies

A catalytic system for intramolecular C(sp2)-H and C(sp3)-H amination of substituted tetrazolopyridines has been successfully developed. The amination reactions are developed using an iron-porphyrin based catalytic system. It has been demonstrated that the same iron-porphyrin based catalytic system efficiently activates both the C(sp2)-H and C(sp3)-H bonds of the tetrazole as well as azide-featuring substrates with a high level of regioselectivity. The method exhibited an excellent functional group tolerance. The method affords three different classes of high-value N-heterocyclic scaffolds. A number of important late-stage C-H aminations have been performed to access important classes of molecules. Detailed studies (experimental and computational) showed that both the C(sp2)-H and C(sp3)-H amination reactions involve a metalloradical activation mechanism, which is different from the previously reported electro-cyclization mechanism. Collectively, this study reports the discovery of a new class of metalloradical activation modes using a base metal catalyst that should find wide application in the context of medicinal chemistry, drug discovery and industrial applications.

Silver Catalyzed Site-Selective C(sp3)-H Bond Amination of Secondary over Primary C(sp3)-H Bonds

Sulfamates are widespread in numerous pharmacologically active molecules. In this paper, Silver/Bathophenanthroline catalyzed the intramolecular selective amination of primary C(sp3)-H bonds and secondary C(sp3)-H bonds of sulfamate esters, to produce cyclic sulfamates in good yields and with a high site-selectivity. DFT calculations revealed that the interaction between sulfamates and L10 makes the molecule more firmly attached to the catalyst, benefiting the catalysis reaction. The in vitro anticancer activity of the final products was evaluated in MCF-7 breast cancer cells.

Combining visible-light induction and copper catalysis for chemo-selective nitrene transfer for late-stage amination of natural products

Nitrene transfer chemistry is an effective strategy for introducing C-N bonds, which are ubiquitous in pharmaceuticals, agrochemicals and diverse bioactive natural products. The development of chemical methodology that can functionalize unique sites within natural products through nitrene transfer remains a challenge in the field. Herein, we developed copper catalyzed chemoselective allylic C-H amination and catalyst-free visible-light induced aziridination of alkenes through nitrene transfer. In general, both reactions tolerate a wide range of functional groups and occur with predictable regioselectivity. Furthermore, combination of these two methods enable the intermolecular chemo-selective late-stage amination of biologically active natural products, leading to C-H amination or C=C aziridination products in a tunable way. A series of control experiments indicate two-step radical processes were involved in both reaction systems.

A Combined Spectroscopic and Computational Study on the Mechanism of Iron-Catalyzed Aminofunctionalization of Olefins Using Hydroxylamine Derived N-O Reagent as the "Amino" Source and "Oxidant"

Herein, we study the mechanism of iron-catalyzed direct synthesis of unprotected aminoethers from olefins by a hydroxyl amine derived reagent using a wide range of analytical and spectroscopic techniques (Mössbauer, Electron Paramagnetic Resonance, Ultra-Violet Visible Spectroscopy, X-ray Absorption, Nuclear Resonance Vibrational Spectroscopy, and resonance Raman) along with high-level quantum chemical calculations. The hydroxyl amine derived triflic acid salt acts as the “oxidant” as well as “amino” group donor. It activates the high-spin Fe(II) (S_t = 2) catalyst [Fe(acac)₂(H₂O)₂] (1) to generate a high-spin (S_t = 5/2) intermediate (Int I), which decays to a second intermediate (Int II) with S_t = 2. The analysis of spectroscopic and computational data leads to the formulation of Int I as [Fe(III)(acac)₂-N-acyloxy] (an alkyl-peroxo-Fe(III) analogue). Furthermore, Int II is formed by N–O bond homolysis. However, it does not generate a high-valent Fe(IV)(NH) species (a Fe(IV)(O) analogue), but instead a high-spin Fe(III) center which is strongly antiferromagnetically coupled (J = −524 cm^–1) to an iminyl radical, [Fe(III)(acac)₂-NH·], giving S_t = 2. Though Fe(NH) complexes as isoelectronic surrogates to Fe(O) functionalities are known, detection of a high-spin Fe(III)-N-acyloxy intermediate (Int I), which undergoes N–O bond cleavage to generate the active iron–nitrogen intermediate (Int II), is unprecedented. Relative to Fe(IV)(O) centers, Int II features a weak elongated Fe–N bond which, together with the unpaired electron density along the Fe–N bond vector, helps to rationalize its propensity for N-transfer reactions onto styrenyl olefins, resulting in the overall formation of aminoethers. This study thus demonstrates the potential of utilizing the iron-coordinated nitrogen-centered radicals as powerful reactive intermediates in catalysis.

Access to β-Lactams via Iron-Catalyzed Olefin Oxyamidation Enabled by the π-Accepting Phthalocyanine Ligand

Herein, we report the development of an iron-catalyzed olefin oxyamidation by utilizing tethered dioxazolones as the nitrenoid precursor to produce valuable β-lactam scaffolds. Mechanistic studies revealed that a relatively strong π-accepting ability of the phthalocyanine ligand is critical in generating the key triplet iron-imidyl radical intermediate to enable the 4-exo-trig-lactamization with the incorporation of oxygen nucleophiles in high diastereoselectivity. This cyclization approach was readily extended to the highly efficient γ-lactam synthesis (TON > 300).

Diastereoconvergent synthesis of anti-1,2-amino alcohols with N-containing quaternary stereocenters via selenium-catalyzed intermolecular C–H amination

We report a diastereoconvergent synthesis of anti-1,2-amino alcohols bearing N-containing quaternary stereocenters using an intermolecular direct C–H amination of homoallylic alcohol derivatives catalyzed by a phosphine selenide. Destruction of the allylic stereocenter during the selenium-catalyzed process allows selective formation of a single diastereomer of the product starting from any diastereomeric mixture of the starting homoallylic alcohol derivatives, eliminating the need for the often-challenging diastereoselective preparation of starting materials. Mechanistic studies show that the diastereoselectivity is controlled by a stereoelectronic effect (inside alkoxy effect) on the transition state of the final [2,3]-sigmatropic rearrangement, leading to the observed anti selectivity. The power of this protocol is further demonstrated on an extension to the synthesis of syn-1,4-amino alcohols from allylic alcohol derivatives, constituting a rare example of 1,4-stereoinduction.

We report a diastereoconvergent synthesis of anti-1,2-amino alcohols bearing N-containing quaternary stereocenters using an intermolecular direct C–H amination of homoallylic alcohol derivatives catalyzed by a phosphine selenide.

O2 -Assisted Four-Component Reaction of Vinyl Magnesium Bromide with Chiral N-tert-Butanesulfinyl Imines To Form syn-1,3-Amino Alcohols

An O₂ -assisted, four-component reaction has been developed to synthesize a wide range of syn-1,3-amino alcohols in one step. The reaction proceeds by oxygenation of vinyl magnesium bromide (component-I) with O₂ (component-II) to give a magnesium enolate of acetaldehyde, which undergoes addition to a chiral N-tert-butanesulfinyl imine (component-III) followed by a sequential addition with excess vinyl magnesium bromide (component-IV). The approach allows diastereoselective synthesis of anti/syn- and syn/syn-3-amino-1,5-diols in good yields with high diastereoselectivity. The method was illustrated in an efficient, four-step synthesis of piperidine alkaloid (-)-2'-epi-ethylnorlobelol.

A soluble iron(II)-phthalocyanine-catalyzed intramolecular C(sp3)-H amination with alkyl azides

Herein, we describe a soluble iron(II)-phthalocyanine, [Fe^II(^tBu₄Pc)(py)₂] (Pc = phthalocyaninato(2-)), as an effective catalyst in intramolecular C(sp³)-H bond amination, with alkyl azides as the nitrogen source, to afford the amination products in moderate to excellent yields with a broad substrate scope.

Synthesis of chiral branched allylamines through dual photoredox/nickel catalysis

Allylamines are versatile building blocks in the synthesis of various naturally occurring products and pharmaceuticals. In contrast to terminal allylamines, the methods of synthesis of their branched congeners with internal, stereodefined double bonds are less explored. This work describes a new approach for the preparation of allylamines via cross-coupling of alkyl bromides with simple 3-bromoallylamines by merging the photoredox approach and Ni catalysis. The reaction proceeds under mild conditions, under blue light irradiation, and in the presence of an organic dye, 4CzIPN, as a photocatalyst. The scope of suitable reaction partners is broad, including alkyl bromides bearing reactive functionalities (e.g., esters, nitriles, aldehydes, ketones, epoxides) and N-protected allylamines, as well as N-allylated secondary and tertiary amines and heterocycles. The employment of non-racemic starting materials allows for rapid and easy construction of complex multifunctional allylamine derivatives without the loss of enantiomeric purity.

Late-Stage Intermolecular Allylic C-H Amination

Allylic amination enables late-stage functionalization of natural products where allylic C-H bonds are abundant and introduction of nitrogen may alter biological profiles. Despite advances, intermolecular allylic amination remains a challenging problem due to reactivity and selectivity issues that often mandate excess substrate, furnish product mixtures, and render important classes of olefins (for example, functionalized cyclic) not viable substrates. Here we report that a sustainable manganese perchlorophthalocyanine catalyst, [MnIII(ClPc)], achieves selective, preparative intermolecular allylic C-H amination of 32 cyclic and linear compounds, including ones housing basic amines and competing sites for allylic, ethereal, and benzylic amination. Mechanistic studies support that the high selectivity of [MnIII(ClPc)] may be attributed to its electrophilic, bulky nature and stepwise amination mechanism. Late-stage amination is demonstrated on five distinct classes of natural products, generally with >20:1 site-, regio-, and diastereoselectivity.

Sustainable manganese catalysis for late-stage C-H functionalization of bioactive structural motifs

The late-stage C–H functionalization of bioactive structural motifs is a powerful synthetic strategy for accessing advanced agrochemicals, bioimaging materials, and drug candidates, among other complex molecules. While traditional late-stage diversification relies on the use of precious transition metals, the utilization of 3d transition metals is an emerging approach in organic synthesis. Among the 3d metals, manganese catalysts have gained increasing attention for late-stage diversification due to the sustainability, cost-effectiveness, ease of operation, and reduced toxicity. Herein, we summarize recent manganese-catalyzed late-stage C–H functionalization reactions of biologically active small molecules and complex peptides.

Interweaving Visible-Light and Iron Catalysis for Nitrene Formation and Transformation with Dioxazolones

Herein, visible-light-driven iron-catalyzed nitrene transfer reactions with dioxazolones for intermolecular C(sp³ )-N, N=S, and N=P bond formation are described. These reactions occur with exogenous-ligand-free process and feature satisfactory to excellent yields (up to 99 %), an ample substrate scope (109 examples) under mild reaction conditions. In contrast to intramolecular C-H amidations strategies, an intermolecular regioselective C-H amidation via visible-light-induced nitrene transfer reactions is devised. Mechanistic studies indicate that the reaction proceeds via a radical pathway. Computational studies show that the decarboxylation of dioxazolone depends on the conversion of ground sextet state dioxazolone-bounding iron species to quartet spin state via visible-light irradiation.

Rh(III)-Catalyzed allylic C-H amidation of unactivated alkenes with in situ generated iminoiodinanes

Rh(iii)-catalyzed allylic C-H amidation of substituted alkenes with in situ generated iminoiodinanes is demonstrated. The presented protocol is compatible with differently functionalized unactivated terminal alkenes and internal alkenes. In terminal alkenes, branch selectivity was observed exclusively. Based on the detailed mechanistic investigation, a possible reaction mechanism involving the in situ generated π-allyl as well as metal-nitrene intermediates has been proposed.

Mechanistic studies of Cp*Ir(III)/Cp*Rh(III)-catalyzed branch-selective allylic C-H amidation: why is Cp*Ir(III) superior to Cp*Rh(III)?

Density functional theory calculations have revealed the mechanism and origins of the reactivity and regioselectivity of the Cp*Ir(iii)/Cp*Rh(iii)-catalyzed allylic C-H amidation of alkenes and dioxazolones. Generally, the catalytic cycle consists of alkene coordination, C(sp3)-H activation, dioxazolone oxidative addition, reductive elimination and proto-demetallation to give the final amidation product. The C-H activation is found to be the rate-determining step, and it controls the reactivity of the reaction. For the Cp*Ir(iii)-catalyzed system, the C-H activation undergoes an Ir(iii)-assisted proton transfer process with a low energy barrier, elucidating its high reactivity. In contrast, the C-H activation step is more like a direct deprotonation in the Cp*Rh(iii)-catalyzed system, which is responsible for its higher barrier and lower reactivity. The branched-selectivity arises from the electronic effect of the alkyl group on the charge distribution over the allylic moiety. Herein, iridium(v) polarizes the allylic group greater than that of the rhodium(v) system, which accounts for its good regioselectivity. The mechanistic insights will be useful for the further development of transition metal-catalyzed selective C-H amination reactions.

Generation and application of Cu-bound alkyl nitrenes for the catalyst-controlled synthesis of cyclic β-amino acids

The advent of saturated N-heterocycles as valuable building blocks in medicinal chemistry has led to the development of new methods to construct such nitrogen-containing cyclic frameworks. Despite the apparent strategic clarity, intramolecular C-H aminations with metallonitrenes have only sporadically been explored in this direction because of the intractability of the requisite alkyl nitrenes. Here, we report copper-catalysed intramolecular amination using an alkyl nitrene generated from substituted isoxazolidin-5-ones upon N-O bond cleavage. The copper catalysis exclusively aminates aromatic C(sp2)-H bonds among other potentially reactive groups, offering a solution to the chemoselectivity problem that has been troublesome with rhodium catalysis. A combined experimental and computational study suggested that the active species in the current cyclic β-amino acid synthesis is a dicopper alkyl nitrene, which follows a cyclisation pathway distinct from the analogous alkyl metallonitrene.

Iron-Catalyzed Radical Activation Mechanism for Denitrogenative Rearrangement Over C(sp3 )-H Amination

An iron-catalyzed denitrogenative rearrangement of 1,2,3,4-tetrazole is developed over the competitive C(sp³ )-H amination. This catalytic rearrangement reaction follows an unprecedented metalloradical activation mechanism. Employing the developed method, a wide number of complex-N-heterocyclic product classes have been accessed. The synthetic utility of this radical activation method is showcased with the short synthesis of a bioactive molecule. Collectively, this discovery underlines the progress of radical activation strategy that should find wide application in the perspective of medicinal chemistry, drug discovery and natural product synthesis research.

Efficient Amination of Activated and Non-Activated C(sp3 )-H Bonds with a Simple Iron-Phenanthroline Catalyst

A readily available catalyst consisting of iron dichloride in combination with 1,10-phenanthroline catalyzes the ring-closing C-H amination of N-benzoyloxyurea to form imidazolidin-2-ones in high yields. The C-H amination reaction is very general and applicable to benzylic, allylic, propargylic, and completely non-activated aliphatic C(sp3 )-H bonds, and it also works for C(sp2 )-H bonds. The surprisingly simple method can be performed under open flask conditions.