General and selective copper-catalyzed reduction of tertiary and secondary phosphine oxides: convenient synthesis of phosphines

Atroposelective Arene-Forming Wittig Reaction by Phosphorus PIII/PV=O Redox Catalysis

The Wittig reaction is renowned as exceptionally versatile method for converting a diversity of aldehydes and ketones into alkenes. Recently, strategies for chiral phosphine catalysis under PIII/PV=O redox cycling emerged to render this venerable transformation stereoselective. Herein, we describe that phosphine redox catalysis enables the enantioselective synthesis of pertinent biaryl atropisomers by means of a stereocontrolled arene-forming Wittig reaction. Key to the process is the release of an endogenous base from readily accessible tert-butyloxycarbonylated Morita-Baylis-Hillman adducts triggered by catalyst intramolecularization, permitting mild phosphine redox catalysis for atroposelective Wittig reactions. By this strategy, a broad diversity of biaryl atropisomers is obtained with up to 94 : 6 enantioselectivity.

Auto-Optimized Electro-Flow Reactor Platform for the in-situ Reduction of P(V) Oxide to P(III) and Their Application

Trivalent phosphine catalysis is mostly utilized to activate the carbon-carbon multiple bonds to form carbanion intermediate species and is highly sensitive to certain variables. Random manual multi-variables are critical for understanding the batch disabled regeneration of trivalent phosphine chemistry. We need the artificial intelligence-based system which can change the variable based on previously conducted failed experiment. Herein, we report an auto-optimized electro-micro-flow reactor platform for the in-situ reduction of stable P(V) oxide to sensitive P(III) and further utilized the method for Corey-Fuchs reaction.

Combined Computational and Experimental Study Reveals Complex Mechanistic Landscape of Brønsted Acid-Catalyzed Silane-Dependent P═O Reduction

The reaction mechanism of Brønsted acid-catalyzed silane-dependent P═O reduction has been elucidated through combined computational and experimental methods. Due to its remarkable chemo- and stereoselective nature, the Brønsted acid/silane reduction system has been widely employed in organophosphine-catalyzed transformations involving P(V)/P(III) redox cycle. However, the full mechanistic profile of this type of P═O reduction has yet to be clearly established to date. Supported by both DFT and experimental studies, our research reveals that the reaction likely proceeds through mechanisms other than the widely accepted "dual activation mode by silyl ester" or "acid-mediated direct P═O activation" mechanism. We propose that although the reduction mechanisms may vary with the substitution patterns of silane species, Brønsted acid generally activates the silane rather than the P═O group in transition structures. The proposed activation mode differs significantly from that associated with traditional Brønsted acid-catalyzed C═O reduction. The uniqueness of P═O reduction originates from the dominant Si/O═P orbital interactions in transition structures rather than the P/H-Si interactions. The comprehensive mechanistic landscape provided by us will serve as a guidance for the rational design and development of more efficient P═O reduction systems as well as novel organophosphine-catalyzed reactions involving P(V)/P(III) redox cycle.

Phosphonium-Catalyzed Monoreduction of Bisphosphine Dioxides: Origin of Selectivity and Synthetic Applications

Controlling product selectivity in successive reactions of the same type is challenging owing to the comparable thermodynamic and kinetic properties of the reactions involved. Here, the synergistic interaction of the two phosphoryl groups in bisphosphine dioxides (BPDOs) with a bromo-phosphonium cation was studied experimentally to provide a practical tool for substrate-catalyst recognition. As the eventual result, we have developed a phosphonium-catalyzed monoreduction of chiral BPDOs to access an array of synthetically useful bisphosphine monoxides (BPMOs) with axial, spiro, and planar chirality, which are otherwise challenging to synthesize before. The reaction features excellent selectivity and impressive reactivity. It proceeds under mild conditions, avoiding the use of superstoichiometric amounts of additives and metal catalysts to simplify the synthetic procedure. The accessibility and scalability of the reaction allowed for the rapid construction of a ligand library for optimization of asymmetric Heck-type cyclization, laying the foundation for a broad range of applications of chiral BPMOs in catalysis.

Tertiary Amine-Mediated Reductions of Phosphine Oxides to Phosphines

The reduction of phosphine oxides without the use of highly reactive reductants represents a safer and more sustainable solution for recycling of organophosphorus compounds. Herein, we disclose an N,N,N',N'-tetramethylethylenediamine (TMEDA)-mediated reduction via an unusual intermolecular hydride transfer. Mechanistic studies suggest that TMEDA serves as a hydride donor, while the P(V) halophosphonium salt acts as the hydride acceptor. This methodology provides a scalable and efficient protocol to reduce phosphine oxides under mild conditions.

Deoxygenation of Phosphine Oxides by PIII/PV═O Redox Catalysis via Successive Isodesmic Reactions

Deoxygenation of phosphine oxides is of great significance to synthesis of phosphorus ligands and relevant catalysts, as well as to the sustainability of phosphorus chemistry. However, the thermodynamic inertness of P═O bonds poses a severe challenge to their reduction. Previous approaches in this regard rely primarily on a type of P═O bond activation with either Lewis/Brønsted acids or stoichiometric halogenating reagents under harsh conditions. Here, we wish to report a novel catalytic strategy for facile and efficient deoxygenation of phosphine oxides via successive isodesmic reactions, whose thermodynamic driving force for breaking the strong P═O bond was compensated by a synchronous formation of another P═O bond. The reaction was enabled by P^III/P═O redox sequences with the cyclic organophosphorus catalyst and terminal reductant PhSiH₃. This catalytic reaction avoids the use of the stoichiometric activator as in other cases and features a broad substrate scope, excellent reactivities, and mild reaction conditions. Preliminary thermodynamic and mechanistic investigations disclosed a dual synergistic role of the catalyst.

Photoinduced Copper-Catalyzed C(sp3)-P Bond Formation by Coupling of Secondary Phosphines with N-(Acyloxy)phthalimides and N-Fluorocarboxamides

A photoinduced copper-catalyzed C(sp³)-P bond formation has been developed by using N-(acyloxy)phthalimides as radical precursors and secondary phosphine boranes as coupling partners. A variety of alkyl carboxylic acid derivatives can be readily transformed into the corresponding phosphines with high reaction efficiency and structural diversity. Besides, utilizing the 1,5-HAT of the N-centered radical process, the δ C(sp³)-H bond can be coupled with secondary phosphines, which provides a novel method for the regioselective formation of C(sp³)-P bonds.

Enantioselective Synthesis of Quaternary Oxindoles: Desymmetrizing Staudinger-Aza-Wittig Reaction Enabled by a Bespoke HypPhos Oxide Catalyst

This paper describes a catalytic asymmetric Staudinger-aza-Wittig reaction of (o-azidoaryl)malonates, allowing access to chiral quaternary oxindoles through phosphine oxide catalysis. We designed a novel HypPhos oxide catalyst to enable the desymmetrizing Staudinger-aza-Wittig reaction through the PIII/PV═O redox cycle in the presence of a silane reductant and an IrI-based Lewis acid. The reaction occurs under mild conditions, with good functional group tolerance, a wide substrate scope, and excellent enantioselectivity. Density functional theory revealed that the enantioselectivity in the desymmetrizing reaction arose from the cooperative effects of the IrI species and the HypPhos catalyst. The utility of this methodology is demonstrated by the (formal) syntheses of seven alkaloid targets: (-)-gliocladin C, (-)-coerulescine, (-)-horsfiline, (+)-deoxyeseroline, (+)-esermethole, (+)-physostigmine, and (+)-physovenine.

Catalytic Vilsmeier-Haack Reactions for C1-Deuterated Formylation of Indoles

The Vilsmeier-Haack reaction is a powerful tool to introduce formyl groups into electron-rich arenes, but its wide application is significantly restricted by stoichiometric employment of caustic POCl₃. Herein, we reported a catalytic version of the Vilsmeier-Haack reaction enabled by a P(III)/P(V)═O cycle. This catalytic reaction provides a facile and efficient route for the direct construction of C1-deuterated indol-3-carboxaldehyde under mild conditions with stoichiometric DMF-d7 as the deuterium source. The products feature a remarkably higher deuteration level (>99%) than previously reported ones and are not contaminated by the likely unselective deuteration at other sites. The present transformation can also be used to transfer other carbonyl groups. Further downstream derivatizations of these deuterated products manifested their potential applications in the synthesis of deuterated bioactive molecules. Mechanistic insight was disclosed from studies of kinetics and intermediates.

An Iodide-Mediated Anodic Amide Coupling

The ubiquity of amide bonds, present in natural products and common pharmaceuticals renders this functional group one of the most prevalent in organic chemistry. Despite its importance and a wide variety of existing methods for its formation, the latter still can be a challenge for classical activating reagents such as chloridating agents or carbodiimides. As the spent reagents often cannot be recycled, the development of more sustainable methods is highly desirable. Herein, we report an operationally simple and mild indirect electrochemical protocol to effect the condensation of carboxylic acids with amines, forming a wide variety of carboxamides.

Synthesis of triarylphosphines from arylammonium salts via one-pot transition-metal-free C-P coupling

A nucleophilic aromatic substitution (S_NAr) reaction that allowed transition-metal-free C-P bond construction via C-N bond cleavage was developed. The coupling between aryltrimethylammonium salts and secondary phosphines from the in situ reduction of diarylphosphine oxides led to the formation of diverse triarylphosphines with various functional groups. This one-pot process was not only a pertinent S_NAr precedent but also a favorable transition-metal-free alternative for C-P coupling.

Visible-Light-Promoted Unsymmetrical Phosphine Synthesis from Benzylamines

Herein, by applying visible-light photoredox catalysis, we have achieved the catalytic deaminative alkylation of diphenylphosphine and phenyl phosphine with benzylamine-derived Katritzky salts at room temperature. The use of Eosin Y as photoredox catalyst and visible light can largely promote the reaction. A series of unsymmetrical tertiary phosphines were successfully synthesized, including phosphines with three different substituents that are otherwise difficult to obtain.

Biphasic electrochemical peptide synthesis

The large amount of waste derived from coupling reagents is a serious drawback of peptide synthesis from a green chemistry viewpoint. To overcome this issue, we report an electrochemical peptide synthesis in a biphasic system. Anodic oxidation of triphenylphosphine (Ph₃P) generates a phosphine radical cation, which serves as the coupling reagent to activate carboxylic acids, and produces triphenylphosphine oxide (Ph₃P Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> O) as a stoichiometric byproduct. In combination with a soluble tag-assisted liquid-phase peptide synthesis, the selective recovery of desired peptides and Ph₃PO was achieved. Given that methods to reduce Ph₃PO to Ph₃P have been reported, Ph₃PO could be a recyclable byproduct unlike byproducts from typical coupling reagents. Moreover, a commercial peptide active pharmaceutical ingredient (API), leuprorelin, was successfully synthesized without the use of traditional coupling reagents.

The large amount of waste derived from coupling reagents is a serious drawback of peptide synthesis from a green chemistry viewpoint.

Investigation of Luminescent Triplet States in Tetranuclear CuI Complexes: Thermochromism and Structural Characterization

To develop new and flexible CuI containing luminescent substances, we extend our previous investigations on two metal-centered species to four metal-centered complexes. These complexes could be a basis for designing new organic light-emitting diode (OLED) relevant species. Both the synthesis and in-depth spectroscopic analysis, combined with high-level theoretical calculations are presented on a series of tetranuclear CuI complexes with a halide containing Cu4 X4 core (X=iodide, bromide or chloride) and two 2-(diphenylphosphino)pyridine bridging ligands with a methyl group in para (4-Me) or ortho (6-Me) position of the pyridine ring. The structure of the electronic ground state is characterized by X-ray diffraction, NMR, and IR spectroscopy with the support of theoretical calculations. In contrast to the para system, the complexes with ortho-substituted bridging ligands show a remarkable and reversible temperature-dependent dual phosphorescence. Here, we combine for the first time the luminescence thermochromism with time-resolved FTIR spectroscopy. Thus, we receive experimental data on the structures of the two triplet states involved in the luminescence thermochromism. The transient IR spectra of the underlying triplet metal/halide-to-ligand charge transfer (3 M/XLCT) and cluster-centered (3 CC) states were obtained and interpreted by comparison with calculated vibrational spectra. The systematic and significant dependence of the bridging halides was analyzed.

A Mild One-Pot Reduction of Phosphine(V) Oxides Affording Phosphines(III) and Their Metal Catalysts

The metal-free reduction of a range of phosphine(V) oxides employing oxalyl chloride as an activating agent and hexachlorodisilane as reducing reagent has been achieved under mild reaction conditions. The method was successfully applied to the reduction of industrial waste byproduct triphenylphosphine(V) oxide, closing the phosphorus cycle to cleanly regenerate triphenylphosphine(III). Mechanistic studies and quantum chemical calculations support the attack of the dissociated chloride anion of intermediated phosphonium salt at the silicon of the disilane as the rate-limiting step for deprotection. The exquisite purity of the resultant phosphine(III) ligands after the simple removal of volatiles under reduced pressure circumvents laborious purification prior to metalation and has permitted the facile formation of important transition metal catalysts.

Microwaves as "Co-Catalysts" or as Substitute for Catalysts in Organophosphorus Chemistry

The purpose of this review is to summarize the importance of microwave (MW) irradiation as a kind of catalyst in organophosphorus chemistry. Slow or reluctant reactions, such as the Diels-Alder cycloaddition or an inverse-Wittig type reaction, may be performed efficiently under MW irradiation. The direct esterification of phosphinic and phosphonic acids, which is practically impossible on conventional heating, may be realized under MW conditions. Ionic liquid additives may promote further esterifications. The opposite reaction, the hydrolysis of P-esters, has also relevance among the MW-assisted transformations. A typical case is when the catalysts are substituted by MWs, which is exemplified by the reduction of phosphine oxides, and by the Kabachnik-Fields condensation affording α-aminophosphonic derivatives. Finally, the Hirao P-C coupling reaction may serve as an example, when the catalyst may be simplified under MW conditions. All of the examples discussed fulfill the expectations of green chemistry.

Convergent Synthesis of Polysubstituted Furans via Catalytic Phosphine Mediated Multicomponent Reactions

Tri- or tetrasubstituted furans have been prepared from terminal activated olefins and acyl chlorides or anhydrides by a multicomponental convergent synthesis mode. Instead of stoichiometric nBu₃P, only catalytic nBu₃P or nBu₃P=O is needed to furnish the furans in modest to excellent yields with a good functional group tolerance under the aid of reducing agent silane. This synthetic method features a silane-driven catalytic intramolecular Wittig reaction as a key annulation step and represents the first successful application of catalytic Wittig reaction in multicomponent cascade reaction.

Catalytic Staudinger Reduction at Room Temperature

We report an efficient catalytic Staudinger reduction at room temperature that enables the preparation of a structurally diverse set of amines from azides in excellent yields. The reaction is based on the use of catalytic amounts of triphenylphosphine as a phosphine source and diphenyldisiloxane as a reducing agent. Our catalytic Staudinger reduction exhibits a high chemoselectivity, as exemplified by reduction of azides over other common functionalities, including nitriles, alkenes, alkynes, esters, and ketones.

Synthesis and Properties of Phospha[5]helicenes Bearing an Inner-Rim Phosphorus Center

New phospha[5]helicene derivatives featuring angular fusion of phosphole and carbohelicene moieties have been synthesized using 7-hydroxybenzo[ b]phosphole oxide as a key intermediate, which can be regioselectively prepared through one-pot multicomponent coupling. The structural behavior of the present phospha[5]helicene oxide, sulfide, and gold complex in the solid and solution states, along with DFT calculations, demonstrated close correlation between the P-centered chirality and the helical chirality as well as facile helicity inversion and equilibrium between the diastereomers in solution.

Application of the Microwave Technique in Continuous Flow Processing of Organophosphorus Chemical Reactions

The microwave (MW) technique is an efficient tool in the realization of organic reactions, as well as in the analytical field and in the food industry. The continuous flow approach is of special interest as a promising way to scale-up MW-assisted syntheses. Besides summarizing the batch precedents, this review focuses on the utilization of the MW technique in the continuous-flow realization of organophosphorus transformations. The advantages of the continuous flow technique against the batch accomplishment are also shown. A few materials chemistry-related applications are also mentioned.

γ-, Diastereo-, and Enantioselective Addition of MEMO-Substituted Allylboron Compounds to Aldimines Catalyzed by Organoboron-Ammonium Complexes

The first catalytic, broadly applicable, efficient, γ-, diastereo-, and enantioselective method for addition of O-substituted allyl-B(pin) compounds to phosphinoylimines (MEM=methoxyethoxymethyl, pin=pinacolato) is presented. The identity of the most effective catalyst and the optimal protecting group for the organoboron reagent were determined by consideration of the steric and electronic requirements at different stages of the catalytic cycle, namely, the generation of the chiral allylboronate, the subsequent 1,3-borotropic shift, and the addition step. Aryl-, heteroaryl-, alkenyl- and alkyl-substituted vicinal phosphinoylamido MEM-ethers were thus accessed in 57-92 % yield, 89:11 to >98:2 γ:α selectivity, 76:24-97:3 diastereomeric ratio, and 90:10-99:1 enantiomeric ratio. The method is scalable, and the phosphinoyl and MEM groups may be removed selectively or simultaneously. Utility is highlighted by enantioselective synthesis of an NK-1 receptor antagonist.

Regioselective and Chemoselective Reduction of Naphthols Using Hydrosilane in Methanol: Synthesis of the 5,6,7,8-Tetrahydronaphthol Core

A regioselective and chemoselective method for catalytic synthesis of biologically interesting 5,6,7,8-tetrahydronaphthols by reduction of naphthols was described. The side aromatic hydrocarbons in naphthols were site-selectively reduced, using hydrosilanes in methanol, allowing for retaining functional phenol scaffolds intact. It presents a rare example of using low-cost and air-stable hydrosilane for catalytic reduction of unactivated aromatic hydrocarbons under mild conditions. This reaction is scalable and proceeds in high selectivity without the formation of 1,2,3,4-tetrahydronaphthol byproducts with toleration of sensitive functionalities such as bromide, chloride, fluoride, ketone, ester, and amide.

Chemoselective Reduction of Phosphine Oxides by 1,3-Diphenyl-Disiloxane

Reduction of phosphine oxides to the corresponding phosphines represents the most straightforward method to prepare these valuable reagents. However, existing methods to reduce phosphine oxides suffer from inadequate chemoselectivity due to the strength of the P=O bond and/or poor atom economy. Herein, we report the discovery of the most powerful chemoselective reductant for this transformation to date, 1,3-diphenyl-disiloxane (DPDS). Additive-free DPDS selectively reduces both secondary and tertiary phosphine oxides with retention of configuration even in the presence of aldehyde, nitro, ester, α,β-unsaturated carbonyls, azocarboxylates, and cyano functional groups. Arrhenius analysis indicates that the activation barrier for reduction by DPDS is significantly lower than any previously calculated silane reduction system. Inclusion of a catalytic Brønsted acid further reduced the activation barrier and led to the first silane-mediated reduction of acyclic phosphine oxides at room temperature.

Transition metal-free stereospecific access to (E)-(1-fluoro-2-arylvinyl)phosphine borane complexes

Synthesis of (E)-(1-fluoro-2-arylvinyl)phosphine boranes has been achieved under metal-free conditions.