Coordination of Phosphinoboranes R2PB(C6F5)2 to Platinum: An Alkene-Type Behavior

Coordination of a Phosphine-Tethered Aminoborane to Group 10 Metals

While π-complexes of C=C bonds are ubiquitous in organometallic chemistry, analogous complexes of the isoelectronic but strongly polarized B=N double bond of aminoboranes are extremely scarce. To address this gap, a diphosphine-aminoborane ligand (PhDPBAiPr) is introduced and its coordination with group 10 metals is investigated. The B=N bond does not coordinate to the metal in Pt(0) and Pd(II) complexes. In contrast, side-on coordination of the B=N bond is observed in the Ni(0) complex (PhDPBAiPr)Ni(NCPh), and the X-ray crystal structure reveals B-N bond elongation compared to the free ligand. The choice of co-ligand strongly influences the presence or absence of side-on coordination at Ni(0) as evidenced by NMR spectroscopy. While the B=N π-complex is geometrically similar to C=C analogues, a bonding analysis reveals that the interaction of the B=N motif with the electron-rich Ni(0) center is best described as 3c4e hyperbond, in which Ni and N are competing for the empty orbital on B.

A neutral, acyclic, borataalkene-like ligand for group 11 metals: L- and Z-type ligands side by side

The overall neutral α-borylated phosphorus ylide Ph₃PC(Me)BEt₂ behaves like a polar borataalkene and can act as acyclic, ambiphilic π-type ligand with L- and Z-type functionalities side by side. In the complexes [MX{η²-Ph₃PC(Me)BEt₂}] (M = Cu, (Ag), Au; X = Cl, NTf₂), the bonding is dominated by the highly nucleophilic ylidic carbon atom (L-type ligand). The Lewis acidic boron atom furnishes nonetheless a small but significant bonding contribution (Z-type ligand).

Reactions of an anionic chelate phosphane/borata-alkene ligand with [Rh(nbd)Cl]2, [Rh(CO)2Cl]2 and [Ir(cod)Cl]2

Borata-alkenes can serve as anionic olefin equivalent ligands in transition metal chemistry. A chelate ligand of this type is described and used for metal coordination. Deprotonation of the Mes₂P(CH₂)₂B(C₆F₅)₂ frustrated Lewis pair in the α-CH[B] position gave the methylene-bridged phosphane/borata-alkene anion. It reacted with the [Rh(nbd)Cl] or [Rh(CO)₂Cl] dimers to give the respective neutral chelate [P/C[double bond, length as m-dash]B][Rh] complexes. The reaction of the [P/C[double bond, length as m-dash]B]^- anion with [Ir(cod)Cl]₂ proceeded similarly, only that the complex underwent a subsequent oxidative addition reaction at the mesityl substituent. Both the resulting Ir(iii)hydride complex 15 and the P/borata-alkene Rh system 12 were used as hydrogenation catalysts. The [P/C[double bond, length as m-dash]B(C₆F₅)₂]Rh(nbd) complex 12 served as a catalyst for arylacetylene polymerization.

Phosphanylalanes and Phosphanylgallanes Stabilized only by a Lewis Base

The synthesis and characterization of the first parent phosphanylalane and phosphanylgallane stabilized only by a Lewis base (LB) are reported. The corresponding substituted compounds, such as IDipp⋅GaH2 PCy2 (1) (IDipp=1,3-bis(2,6-diisopropylphenyl)-imidazolin-2-ylidene) were obtained by the reaction of LiPCy2 with IDipp⋅GaH2 Cl. However, the LB-stabilized parent compounds IDipp⋅GaH2 PH2 (3) and IDipp⋅AlH2 PH2 (4) were prepared via a salt metathesis of LiPH2 ⋅DME with IDipp⋅E'H2 Cl (E'=Ga, Al) or by H2 -elimination reactions of IDipp⋅E'H3 (E'=Ga, Al) and PH3 , respectively. The compounds could be isolated as crystalline solids and completely characterized. Supporting DFT computations gave insight into the reaction pathways as well as into the stability of these compounds with respect to their decomposition behavior.

Understanding the role of frustrated Lewis pairs as ligands in transition metal-catalyzed reactions

The role of frustrated Lewis pairs (FLPs) as ligands in gold(i) catalyzed-reactions has been computationally investigated by using state-of-the-art density functional theory calculations. To this end, the nature of (P,B)-FLP-transition metal interactions in different gold(i)-complexes has been first explored in detail with the help of the energy decomposition analysis method, which allowed us to accurately quantify the so far poorly understood AuB interactions present in these species. The impact of such interactions on the catalytic activity of gold(i)-complexes has been then evaluated by performing the Au(i)-catalyzed hydroarylation reaction of phenylacetylene with mesitylene. With the help of the activation strain model of reactivity, the factors governing the higher activity of Au(i)-complexes having a FLP as a ligand as compared to that of the parent PPh₃ system have also been quantitatively identified.

Phosphinoborane interception at magnesium by borane-assisted phosphine-borane dehydrogenation

Ph₂PBH₂ is generated and trapped on-metal by addition of B(C₆F₅)₃ to a β-diketiminato magnesium phospidoborane complex, similar reactivity is meanwhile prevented for the analogous calcium-based system by formation of a stable η⁶-toluene complex.

Hydrophosphination of boron-boron multiple bonds

Five compounds containing boron–boron multiple bonds are shown to undergo hydrophosphination reactions with diphenylphosphine in the absence of a catalyst. With diborenes, the products obtained are highly dependent on the substitution pattern at the boron atoms, with both 1,1- and 1,2-hydrophosphinations observed. With a symmetrical diboryne, 1,2-hydrophosphination yields a hydro(phosphino)diborene. The different mechanistic pathways for the hydrophosphination of diborenes are rationalised with the aid of density functional theory calculations.

Compounds containing boron–boron double and triple bonds are shown to undergo uncatalysed hydrophosphination reactions with diphenylphosphine.

Structural and spectroscopic analysis of a new family of monomeric diphosphinoboranes

We present a series of amino- and aryl(diphosphino)boranes R₂PB(R'')PR'₂, where R₂P, R'₂P = tBu₂P, tBuPhP, Ph₂P, Cy₂P, and R'' = iPr₂N, Ph, which were obtained via the metathesis reaction of iPr₂NBBr₂ or PhBBr₂ with selected lithium phosphides. The structures of isolated diphosphinoboranes were characterized in the solid state and in solution by means of X-ray diffraction and NMR spectroscopy, respectively. The utility of these P-B-P species as ligands for transition metal complexes was tested in the reaction with [(COD)PtMe₂]. Moreover, we carried out DFT calculations to elucidate bonding interactions and philicity of the reactive centers as well as to analyze conformations of the studied species. Electronic and steric properties of substituents on P and B atoms were found to have a strong influence on the structures of the obtained compounds. Three main types of diphosphinoboranes were distinguished, based on the strength of P-B π-interaction within the molecule: (i) application of strong electron-donating substituents on P-atoms and electron-accepting phenyl groups on B atoms led to the structure with one double P[double bond, length as m-dash]B and one single P-B bond and diverse planar and pyramidal geometry of phosphanyl groups; (ii) reduction of the donor ability of phosphanyl groups gave diphosphanylboranes with delocalized P-B-P π-interactions; (iii) introduction of amino groups with strong donor abilities on B atoms canceled P-B π-interactions and allowed compounds with two very long P-B bonds and two pyramidal phosphanyl groups to be obtained.

Unsaturated vicinal frustrated phosphane/borane Lewis pairs as ligands in gold(i) chemistry

The P/B FLP 6, formed by the 1,1-hydroboration of dimesitylphosphino(trimethylsilyl)acetylene with HB(C6F5)2 forms the Au(i)X complexes 9a (X: Cl) and 10a (X: NTf2), respectively. Both show marked AuB interactions. The P/B FLP isomer 8, featuring the bulky SiMe3 substituent at the carbon adjacent to boron forms gold complexes 9b and 10b, both of which show weaker AuB interactions. Complex 10a was employed in the catalytic hydroamination of a series of alkynes with p-toluidine. Complexes 9 and 10 were characterized by X-ray diffraction.

Synthesis, structure and palladium coordination of ambiphilic, pyridine- and phosphine-tethered N-boryl imine ligands

New classes of ambiphilic ligands incorporating N-boryl imines can be generated in two steps from aldehydes, and their structure modulated by the ligand motif.

Expanding the allyl analogy: accessing η3-P,B,P diphosphinoborane complexes of group 10

Using the diphosphinoborane, (PPh2)2BMes (Mes = 2,4,6-Me3C6H3), we report the first examples of η3-P,B,P-ligated complexes using Ni(0) and Pt(ii). Reaction of (PPh2)2BMes with Ni(COD)2 or Pt(COD)Me2 (COD = 1,5-cyclooctadiene) results in gradual COD displacement to give [η3-P,B,P-(PPh2)2BMes]Ni(COD) (3) or [η3-P,B,P-(PPh2)2BMes]Pt(CH3)2 (6). Complex 3 serves as a versatile Ni-containing synthon for the preparation of square planar or tetrahedral Ni(0) complexes. Notably, the M-B interaction in these systems is non-negligible - with coordination resulting in an upfield shift of ca. 80 ppm in the 11B NMR spectrum. We also show that treatment of the PtIV halide precursor, [PtMe3I]4 with this ligand framework results in migration of X-type ligands (CH3- and I-) to boron and reductive elimination of ethane (C2H6) to give a distorted square planar zwitterionic PtII complex, Pt[κ2-P,P-(PPh2)2B(Mes)(CH3)][κ2-P,P-(PPh2)2B(Mes)(I)] (10). This reactivity suggests the feasibility of (PPh2)2BMes-ligand-induced labilization of M-X ligands.

Trihydroborates and Dihydroboranes Bearing a Pentacoordinated Phosphorus Atom: Double Ring Expansion To Balance the Coordination States

The first trihydroborate bearing a pentacoordinated phosphorus atom was synthesized as a new P-B bonded compound. Hydride abstraction of the trihydroborate gave an intermediary dihydroborane, which showed hydroboration reactivity and was trapped with pyridine whilst maintaining the P-B bond. The dihydroborane underwent a rearrangement, which involved a double ring expansion to compensate for the unbalanced coordination states of the phosphorus and boron atoms, to give a new fused bicyclic phosphine-boronate.

Dehydrocoupling of phosphine-boranes using the [RhCp*Me(PMe3)(CH2Cl2)][BArF4] precatalyst: stoichiometric and catalytic studies

Detailed experimental and computational studies are reported on the fundamental B–H and P–H bond activation steps involved in the dehydrocoupling/dehydropolymerization of primary and secondary phosphine–boranes, H₃B·PPhR′H (R = Ph, H), using the [RhCp*(PMe₃)Me(ClCH₂Cl)][BAr^F₄] catalyst.

We report a detailed, combined experimental and computational study on the fundamental B–H and P–H bond activation steps involved in the dehydrocoupling/dehydropolymerization of primary and secondary phosphine–boranes, H₃B·PPhR′H (R = Ph, H), using [RhCp*(PMe₃)Me(ClCH₂Cl)][BAr^F₄], to either form polyphosphino-boranes [H₂B·PPhH]_n (M_n ∼ 15 000 g mol^–1, PDI = 2.2) or the linear diboraphosphine H₃B·PPh₂BH₂·PPh₂H. A likely polymer-growth pathway of reversible chain transfer step-growth is suggested for H₃B·PPhH₂. Using secondary phosphine–boranes as model substrates a combined synthesis, structural (X-ray crystallography), labelling and computational approach reveals: initial bond activation pathways (B–H activation precedes P–H activation); key intermediates (phosphido-boranes, α-B-agostic base-stabilized boryls); and a catalytic route to the primary diboraphosphine (H₃B·PPhHBH₂·PPhH₂). It is also shown that by changing the substituent at phosphorus (Ph or Cy versus^tBu) different final products result (phosphido-borane or base stabilized phosphino-borane respectively). These studies provide detailed insight into the pathways that are operating during dehydropolymerization.

Metal-Free Addition/Head-to-Tail Polymerization of Transient Phosphinoboranes, RPH-BH2: A Route to Poly(alkylphosphinoboranes)

Mild thermolysis of Lewis base stabilized phosphinoborane monomers R(1)R(2)P-BH2⋅NMe3 (R(1),R(2)=H, Ph, or tBu/H) at room temperature to 100 °C provides a convenient new route to oligo- and polyphosphinoboranes [R(1)R(2)P-BH2]n. The polymerization appears to proceed via the addition/head-to-tail polymerization of short-lived free phosphinoborane monomers, R(1)R(2)P-BH2. This method offers access to high molar mass materials, as exemplified by poly(tert-butylphosphinoborane), that are currently inaccessible using other routes (e.g. catalytic dehydrocoupling).

Iron-catalyzed dehydropolymerization: a convenient route to poly(phosphinoboranes) with molecular-weight control

The catalyst loading is the key to control the molecular weight of the polymer in the iron-catalyzed dehydropolymerization of phosphine-borane adducts. Studies showed that the reaction proceeds through a chain-growth coordination-insertion mechanism.

Dative Au→Al interactions: crystallographic characterization and computational analysis

Hitherto unknown Au→Al interactions have been evidenced upon coordination of the geminal phosphorus-aluminum Lewis pair Mes2 PC(=CHPh)AltBu2 (Mes=2,4,6-trimethylphenyl). Four different gold(I) complexes featuring alkyl (Me), aryl (Ph, C6F5), and alkynyl (C≡CPh) co-ligands have been prepared. X-ray diffraction analyses show that P→Au→Al bridging coordination induces noticeable bending of the ligand (the PCAl bond angle shrinks by 13°). This new type of transition metal→Lewis acid interaction has been analyzed by DFT calculations.

Mono-, di-, and triborylphosphine analogues of triarylphosphines

Diazaborinylphosphines based on the 1,8-diaminonaphthylboronamide heterocycle are prepared by a chlorosilane-elimination reaction, and their structural and bonding properties are compared to those of PPh3. The precursor chloroborane ClB{1,8-(NH)2C10H6} (I) is fully characterized including its crystal structure, which features intermolecular π-π stacking, B···N interactions, and N-H···Cl hydrogen bonding. Treatment of I with Ph3-nP(SiMe3)n gave the corresponding Ph3-nP(B{1,8-(NH)2C10H6})n, {L1 (n = 1), L2 (n = 2), and L3 (n = 3)}. The crystal structures of L1-3 reveal an increase in the planarity at P as a function of n, and the steric bulk of the diazaborinyl substituent B{1,8-(NH)2C10H6} is similar to that of a phenyl. Nucleus-independent chemical shift calculations were carried out that suggest that the 14 π-electron diazaborinyl substituent can be described as aromatic overall, though the BN2-containing ring is slightly antiaromatic. The complexes cis-[Mo(L1-3)2(CO)4] (1-3) are prepared from [Mo(nbd)(CO)4] (nbd = norbornadiene) and L1-3. From the position of the ν(CO) (A1) band in the IR spectra of 1-3, it is deduced that the diazaborinyl substituent has a donating capacity similar to an alkyl group.

A simple route to azaborinylphosphines: isoelectronic B–N analogues of arylphosphine ligands

Azaborinylphosphines are readily prepared by the reaction of silylphosphines with a chloroborane under mild conditions; they are shown to contain P–B bonds that are sufficiently robust to allow these ligands to be used in homogeneous catalysis.

Carbonylation reactions of intramolecular vicinal frustrated phosphane/borane Lewis pairs

The intramolecular frustrated Lewis pair (FLP) Mes2PCH2CH2B(C6F5)2 4 adds cooperatively to carbon monoxide to form the five-membered heterocyclic carbonyl compound 5. The intramolecular FLP 7 contains an exo-3-B(C6F5)2 Lewis acid and an endo-2-PMes2 Lewis base functionality coordinated at the norbornane framework. This noninteracting FLP adds carbon monoxide in solution at -35 °C cooperatively to yield a five-membered heterocyclic FLP-carbonyl compound 8. In contrast, FLP 7 is carbonylated in a CO-doped argon matrix at 25 K to selectively form a borane carbonyl 9 without involvement of the adjacent phosphanyl moiety. The free FLP 7 was generated in the gas phase from its FLPH2 product 10. A DFT study has shown that the phosphonium hydrido borate zwitterion 10 is formed exergonically in solution but tends to lose H2 when brought into the gas phase.