Half-Metallic Ferromagnetism in Synthetic Co9Se8 Nanosheets with Atomic Thickness

Size-matching compositing nanoprobe of AIE-type gold nanocluster supramolecular nanogels wrapped by hypergravity-tailored MnO2 nanosheets for cellular glutathione detection

Compositing has been the main approach for material creation via wisely combining material components with different properties. MnO2 nanosheets (MNSs) with thin 2 D morphology are usually applied to composite molecules or nanomaterials for biosensing and bioimaging applications. However, such composition is actually structurally unmatched, albeit performance matching. Here, a series of benefits merely on the basis of structural match have been unearthed via tailoring MNSs with four sizes by synthesis under controllable hypergravity field. The classical fluorophore-quencher couple was utilized as the subject model, where the soft supramolecular nanogels based on aggregation-induced emission (AIE)-active gold nanoclusters were wrapped by MNSs of strong absorption. By comparative study of one-on-one wrapping and one-to-many encapsulation with geometrical selection of different MNSs, we found that the one-on-one wrapping model protected weakly-bonded nanogels from combination-induced distortion and strengthened nanogel networks via endowing exoskeleton. Besides, wrapping pattern and size-match significantly enhanced the quenching efficiency of MNSs towards the emissive nanogels. More importantly, the well-wrapped nanocomposites had considerable enhanced biological compatibility with much lower cytotoxicity and higher transfection capacity than the untailored MNSs composite and could serve as cellular glutathione detection.

The Controllable Synthesis of High-Quality Two-Dimensional Iron Sulfide with Specific Phases

2D Fe-chalcogenides have drawn significant attention due to their unique structural phases and distinct properties in exploring magnetism and superconductivity. However, it remains a significant challenge to synthesize 2D Fe-chalcogenides with specific phases in a controllable manner since Fe-chalcogenides have multiple phases. Herein, a molecular sieve-assisted strategy is reported for synthesizing ultrathin 2D iron sulfide on substrates via the chemical vapor deposition method. Using a molecular sieve and tuning growth temperatures to control the partial pressures of precursor concentrations, hexagonal FeS, tetragonal FeS, and non-stoichiometric Fe₇ S₈ nanoflakes can be precisely synthesized. The 2D h-FeS, t-FeS, and Fe₇ S₈ have high conductivities of 5.4 × 10⁵ S m^-1 , 5.8 × 10⁵ S m^-1 , and 1.9 × 10⁶ S m^-1 . 2D tetragonal FeS shows a superconducting transition at 4 K. The spin reorientation at ≈30 K on the non-stoichiometric Fe₇ S₈ nanoflakes with ferrimagnetism up to room temperature has also been observed. The controllable synthesis of various phases of 2D iron sulfide may provide a route for synthesizing other 2D compounds with various phases.

2D Zinc Oxide - Synthesis, Methodologies, Reaction Mechanism, and Applications

Zinc oxide (ZnO) is a thermally stable n-type semiconducting material. ZnO 2D nanosheets have mainly gained substantial attention due to their unique properties, such as direct bandgap and strong excitonic binding energy at room temperature. These are widely utilized in piezotronics, energy storage, photodetectors, light-emitting diodes, solar cells, gas sensors, and photocatalysis. Notably, the chemical properties and performances of ZnO nanosheets largely depend on the nano-structuring that can be regulated and controlled through modulating synthetic strategies. Two synthetic approaches, top-down and bottom-up, are mainly employed for preparing ZnO 2D nanomaterials. However, owing to better results in producing defect-free nanostructures, homogenous chemical composition, etc., the bottom-up approach is extensively used compared to the top-down method for preparing ZnO 2D nanosheets. This review presents a comprehensive study on designing and developing 2D ZnO nanomaterials, followed by accenting its potential applications. To begin with, various synthetic strategies and attributes of ZnO 2D nanosheets are discussed, followed by focusing on methodologies and reaction mechanisms. Then, their deliberation toward batteries, supercapacitors, electronics/optoelectronics, photocatalysis, sensing, and piezoelectronic platforms are further discussed. Finally, the challenges and future opportunities are featured based on its current development.

Thermal Stability and Sublimation of Two-Dimensional Co9Se8 Nanosheets for Ultrathin and Flexible Nanoelectronic Devices

An understanding of the structural and compositional stability of nanomaterials is significant from both fundamental and technological points of view. Here, we investigate the thermal stability of half-unit-cell thick two-dimensional (2D) Co₉Se₈ nanosheets that are exceptionally interesting because of their half-metallic ferromagnetic properties. By employing in situ heating in the transmission electron microscope (TEM), we find that the nanosheets show good structural and chemical stability without changes to the cubic crystal structure until sublimation of the nanosheets starts at temperatures between 460 and 520 °C. The real-time observations of the sublimation process show preferential removal at {110} type crystal facets. From an analysis of sublimation rates at various temperatures, we find that the sublimation occurs through noncontinuous and punctuated mass loss at lower temperatures while the sublimation is continuous and uniform at higher temperatures. Our findings provide an understanding of the nanoscale structural and compositional stability of 2D Co₉Se₈ nanosheets, which is of importance for their reliable application and sustained performance as ultrathin and flexible nanoelectronic devices.

Copper Phosphonate Lamella Intermediates Control the Shape of Colloidal Copper Nanocrystals

Understanding the structure and behavior of intermediates in chemical reactions is the key to developing greater control over the reaction outcome. This principle is particularly important in the synthesis of metal nanocrystals (NCs), where the reduction, nucleation, and growth of the reaction intermediates will determine the final size and shape of the product. The shape of metal NCs plays a major role in determining their catalytic, photochemical, and electronic properties and, thus, the potential applications of the material. In this work, we demonstrate that layered coordination polymers, called lamellae, are reaction intermediates in Cu NC synthesis. Importantly, we discover that the lamella structure can be fine-tuned using organic ligands of different lengths and that these structural changes control the shape of the final NC. Specifically, we show that short-chain phosphonate ligands generate lamellae that are stable enough at the reaction temperature to facilitate the growth of Cu nuclei into anisotropic Cu NCs, being primarily triangular plates. In contrast, lamellae formed from long-chain ligands lose their structure and form spherical Cu NCs. The synthetic approach presented here provides a versatile tool for the future development of metal NCs, including other anisotropic structures.

Magnetic Order, Electrical Doping, and Charge-State Coupling at Amphoteric Defect Sites in Mn-Doped 2D Semiconductors

Two-dimensional (2D) dilute magnetic semiconductors (DMSs) are attractive material platforms for applications in multifunctional nanospintronics due to the prospect of embedding controllable magnetic order within nanoscale semiconductors. Identifying candidate host material and dopant systems requires consideration of doping formation energies, magnetic ordering, and the tendency for dopants to form clustered domains. In this work, we consider the defect thermodynamics and the dilute magnetic properties across charge states of 2D-MoS₂ and 2D-WS₂ with Mn magnetic dopants as candidate systems for 2D-DMSs. Using hybrid density functional calculations, we study the magnetic and electronic properties of these systems across configurations with thermodynamically favorable defects: 2D-MoS₂ doped with Mn atoms at sulfur site (Mn_S), at two Mo sites (2Mn_Mo), on top of a Mo atom (Mn-top), and at a Mo site (Mn_Mo). While the majority of the Mn-defect complexes provide trap states, Mn_Mo and Mn_W are amphoteric, although previously predicted to be donor defects. The impact of cluster formation of these amphoteric defects on magnetic ordering is also considered; both Mn_Mo-Mn_Mo (2Mn_2Mo) and Mn_W-Mn_W (2Mn_2W) clusters are found to be stable in ferromagnetic (FM) ordering. Interestingly, we observed the defect charge state dependent magnetic behavior of 2Mn_2Mo and 2Mn_2W clusters in 2D-TMDs. We investigate that the FM coupling of 2Mn_2Mo and 2Mn_2W clusters is stable in only a neutral charge state; however, the antiferromagnetic (AFM) coupling is stable in the +1 charge state. 2Mn_2Mo clusters provide shallow donor levels in AFM coupling and deep donor levels in FM coupling. 2Mn_2W clusters lead to trap states in the FM and AFM coupling. We demonstrate the AFM to FM phase transition at a critical electron density n^c_e = 3.5 × 10¹³ cm^-2 in 2D-MoS₂ and 2D-WS₂. At a 1.85% concentration of Mn, we calculate the Curie temperature of 580 K in the mean-field approximation.

Magnetic Nanostructures: Rational Design and Fabrication Strategies toward Diverse Applications

In recent years, the continuous development of magnetic nanostructures (MNSs) has tremendously promoted both fundamental scientific research and technological applications. Different from the bulk magnet, the systematic engineering on MNSs has brought a great breakthrough in some emerging fields such as the construction of MNSs, the magnetism exploration of multidimensional MNSs, and their potential translational applications. In this review, we give a detailed description of the synthetic strategies of MNSs based on the fundamental features and application potential of MNSs and discuss the recent progress of MNSs in the fields of nanomedicines, advanced nanobiotechnology, catalysis, and electromagnetic wave adsorption (EMWA), aiming to provide guidance for fabrication strategies of MNSs toward diverse applications.

Free-standing 2D non-van der Waals antiferromagnetic hexagonal FeSe semiconductor: halide-assisted chemical synthesis and Fe2+ related magnetic transitions

The scarcity of two-dimensional (2D) magnetic nanostructures has hindered their applications in spintronics, which is attributed to that most magnetic materials exhibit non-van der Waals (nvdWs) structures and it is hard to reduce their thickness to 2D nanostructures. Thus it is necessary to develop a promising strategy for free-standing 2D magnetic nvdWs nanostructures. We have achieved free-standing 2D nvdWs hexagonal FeSe with a thickness of 2.9 nm by the reaction between the oleylamine-Se complex and Fe2+ with the assistance of Cl-, where the synergetic effects of Cl- and -NH2 lead to anisotropic growth. Inspiringly, the 2D hexagonal FeSe exhibits intrinsic antiferromagnetic order rooted in Fe2+ and semiconducting nature. In addition, the temperature variation would result in the chemical environment changes of Fe2+, responsible for the temperature-dependent magnetic transitions. This work promotes the potential applications of 2D hexagonal FeSe and the preparation of other 2D nvdWs materials.

Emerging two-dimensional nanomaterials for electrochemical nitrogen reduction

Ammonia (NH₃) is essential to serve as the biological building blocks for maintaining organism function, and as the indispensable nitrogenous fertilizers for increasing the yield of nutritious crops. The current Haber-Bosch process for industrial NH₃ production is highly energy- and capital-intensive. In light of this, the electroreduction of nitrogen (N₂) into valuable NH₃, as an alternative, offers a sustainable pathway for the Haber-Bosch transition, because it utilizes renewable electricity and operates under ambient conditions. Identifying highly efficient electrocatalysts remains the priority in the electrochemical nitrogen reduction reaction (NRR), marking superior selectivity, activity, and stability. Two-dimensional (2D) nanomaterials with sufficient exposed active sites, high specific surface area, good conductivity, rich surface defects, and easily tunable electronic properties hold great promise for the adsorption and activation of nitrogen towards sustainable NRR. Therefore, this Review focuses on the fundamental principles and the key metrics being pursued in NRR. Based on the fundamental understanding, the recent efforts devoted to engineering protocols for constructing 2D electrocatalysts towards NRR are presented. Then, the state-of-the-art 2D electrocatalysts for N₂ reduction to NH₃ are summarized, aiming at providing a comprehensive overview of the structure-performance relationships of 2D electrocatalysts towards NRR. Finally, we propose the challenges and future outlook in this prospective area.

Ferromagnetic Cr4PtGa17: A Half-Heusler-Type Compound with a Breathing Pyrochlore Lattice

We describe the crystal structure and elementary magnetic properties of a previously unreported ternary intermetallic compound, Cr₄PtGa₁₇, which crystallizes in a rhombohedral unit cell in the noncentrosymmetric space group R3m. The crystal structure is closely related to those of XYZ half-Heusler compounds, where X, Y, and Z are reported to be single elements only, occupying three different face-centered-cubic sublattices. The new material, Cr₄PtGa₁₇, can be most straightforwardly illustrated by writing the formula as (PtGa₂)(Cr₄Ga₁₄)Ga (X = PtGa₂, Y = Cr₄Ga₁₄, Z = Ga); that is, the X and Y sites are occupied by clusters instead of single elements. The magnetic Cr occupies a breathing pyrochlore lattice. Ferromagnetic ordering is found below T_C ∼ 61 K, by both neutron diffraction and magnetometer studies, with a small, saturated moment of ∼0.25 μ_B/Cr observed at 2 K, making Cr₄PtGa₁₇ the first ferromagnetically ordered material with a breathing pyrochlore lattice. A magnetoresistance of ∼140% was observed at 2 K. DFT calculations suggest that the material has a nearly half-metallic electronic structure. The new material, Cr₄PtGa₁₇, the first realization of both a half-Heusler-type structure and a breathing pyrochlore lattice, might pave a new way to achieve novel types of half-Heusler compounds.

Co0.85Se particles encapsulated in the inner wall of nitrogen-doped carbon matrix nanotubes with rational interfacial bonds for high-performance lithium-ion batteries

Cobalt selenides based on the conversion reaction have been widely applied in lithium-ion batteries (LIBs) due to their high conductivity and high specific capacity. However, effectively suppressing the fast capacity fade caused by the irreversible Se/Co dissolution and serious volume change during the cycling process is still a challenge. Herein, a facile and efficient self-generated sacrificial template method is used to prepare Co_0.85Se nanoparticles encapsulated in the inner wall of N-doped carbon matrix nanotubes (Co_0.85Se@NCMT). In this strategy, the formation of stable Co-N/C and Se-C as well as enhancing the mechanical strength between active materials and N-doped carbon matrix nanotubes can critically affect the performance through suppressing the dissolution of Se/Co, decreasing energy band, promoting the shuttling of the ions/e^- moving and mitigating the volume expansion during the charge-discharge process, which play a key role in improving the structure stability and electrochemical performance. Besides, Co_0.85Se nanoparticles encapsulated in the robust carbon matrix inner wall can ensure good electron transfer and prevent the aggregation of nanoparticles, leading to superior electrochemical reversibility. Finally, carbon matrix nanotubes can provide sufficient space to effectively accommodate the volume changes of encapsulated Co_0.85Se nanoparticles, thereby improving the cyclic stability. Based on the above advantages, as expected, the electrochemical investigations exhibited that the Co_0.85Se@NCMT anode performs a stable reversible capacity of 462.9 mA h g^-1 at a large current density of 5 A g^-1 and a remarkable capacity retention of 99.5% after 800 cycles, suggesting its promising potential for the anode of LIBs.

Ferromagnetism of two-dimensional transition metal chalcogenides: both theoretical and experimental investigations

In recent years, with the fast development of integrated circuit electronic devices and technologies, it has become urgent to improve the density of data storage and lower the energy losses of devices. Under these circumstances, two-dimensional (2D) materials, which have a smaller size and lower energy loss compared with bulk materials, are becoming ideal candidates for future spintronic devices. Among them, 2D transition metal chalcogenides (TMCs), which have excellent electronic and optical properties, have attracted great attention from researchers. However, most of them are intrinsically non-magnetic, which severely hinders their further applications in spintronics. Therefore, introducing intrinsic room-temperature ferromagnetism into 2D TMC materials has become an important issue in spintronics. In this work, we review the introduction of intrinsic ferromagnetism into typical 2D TMCs using various strategies, such as defect engineering, doping with transition metal elements, and phase transfer. Additionally, we found that their ferromagnetism could be adjusted via changing the experimental conditions, such as the nucleation temperature, ion irradiation dose, doping amount, and phase ratio. Finally, we provide some insight into prospective solutions for introducing ferromagnetism into 2D TMCs, hoping to shed some light on future spintronics development.

Electronic Modulation of Non-van der Waals 2D Electrocatalysts for Efficient Energy Conversion

The exploration of efficient electrocatalysts for energy conversion is important for green energy development. Owing to their high surface areas and unusual electronic structure, 2D electrocatalysts have attracted increasing interest. Among them, non-van der Waals (non-vdW) 2D materials with numerous chemical bonds in all three dimensions and novel chemical and electronic properties beyond those of vdW 2D materials have been studied increasingly over the past decades. Herein, the progress of non-vdW 2D electrocatalysts is critically reviewed, with a special emphasis on electronic structure modulation. Strategies for heteroatom doping, vacancy engineering, pore creation, alloying, and heterostructure engineering are analyzed for tuning electronic structures and achieving intrinsically enhanced electrocatalytic performances. Lastly, a roadmap for the future development of non-vdW 2D electrocatalysts is provided from material, mechanism, and performance viewpoints.

The electrochemical kinetics of cerium selenide nano-pebbles: the design of a device-grade symmetric configured wide-potential flexible solid-state supercapacitor

Next-generation portable flexible electronic appliances require liquid-free energy storage supercapacitor devices to eliminate leakage and to support mechanical bending that is compatible with roll-to-roll technologies. Hence, a state-of-the-art process is presented to design a solid-state, wide-potential and flexible supercapacitor through the use of nano-pebbles of cerium selenide via a simple successive ionic layer adsorption and reaction (SILAR) method that could allow an industry scalable route. We strongly believe that this is the first approach amongst physical and chemical routes not only for synthesizing cerium selenide in thin-film form but also using it for device-grade supercapacitor applications. The designed solid-state symmetric supercapacitor assembled from cerium selenide electrodes sandwiched by PVA-LiClO₄ gel electrolyte attains a wide potential window of 1.8 V with capacitance of 48.8 F g^-1 at 2 mV s^-1 and reveals excellent power density of 4.89 kW kg^-1 at an energy density of 11.63 W h kg^-1. The formed device is capable of 87% capacitive retention even at a mechanical bending angle of 175°. Lighting up a strip of 21 parallel connected red LEDs clearly demonstrates the practical use of the designed symmetric solid-state supercapacitor, aiming towards the commercialization of the product in the future.

Ultrafine Co0.85Se nanocrystals dispersed in 3D CNT network as a flexible free-standing anode for high-performance lithium-ion battery

A flexible free-standing film electrode with high pseudocapacitive contribution and strengthened cyclic stability was successfully prepared.

High Curie temperature and carrier mobility of novel Fe, Co and Ni carbide MXenes

Two-dimensional (2D) magnets with room temperature ferromagnetism and semiconductors with moderate band gap and high carrier mobility are highly desired for applications in nanoscale electronics and spintronics. By performing the first-principles calculations, we investigate novel Fe, Co, Ni carbide based pristine (M₂C) and functionalized (M₂CT₂, T: F, O, OH) MXenes. Our calculations show that Fe₂C, Co₂C, Ni₂C, Fe₂CF₂, Fe₂CO₂, Fe₂C(OH)₂, Co₂CF₂, Co₂C(OH)₂ and Ni₂CF₂ are dynamically and mechanically stable. More importantly, Fe₂C, Co₂C, Fe₂CF₂ and Fe₂C(OH)₂ exhibit intrinsic ferromagnetism (magnetic moments 2-5μ_B per unit cell). Monte Carlo simulations suggest high Curie temperatures of 590 and 920 K for Fe₂C and Fe₂CF₂, respectively, at the HSE06 level owing to the large spin magnetic moments and strong ferromagnetic coupling. Based on the deformation potential theory, we predict high and anisotropic hole mobility (0.2-1.4 × 10⁴ cm² V^-1 s^-1) for semiconducting Fe₂CO₂ and Co₂C(OH)₂. Additionally, Ni₂CF₂ demonstrates highly anisotropic electron mobility together with a direct band gap. Our results further show the effectiveness of surface functionalization in modulating the electronic and magnetic properties and broadening the properties of MXenes to achieve long-range intrinsic ferromagnetism well above room temperature and high carrier mobility.

Selenium-rich nickel cobalt bimetallic selenides with core-shell architecture enable superior hybrid energy storage devices

The continuous exploration of advanced electrode materials is of remarkable significance to revolutionize next-generation high-performance energy storage devices towards a green future. Benefiting from their electrochemically active sites and abundant redox centers, bimetallic selenides with desirable nanostructures recently have emerged as promising electrode alternatives for battery-supercapacitor hybrid (BSH) devices which demonstrate enormous potential in bridging the gap between electrochemical properties with high power densities (supercapacitors) and energy densities (batteries). Herein, employing the hydrothermal approach with solid Ni-Co spheres as precursors followed by the selenization process, selenide-rich bimetallic selenide spheres with a core-shell nanostructure were rationally designed and synthesized for use as the cathode electrode in superior BSH devices. The as-obtained (NiCo)₉Se₈/(NiCo)_0.85Se (Ni-Co-Se) exhibits a high specific capacity of 164.44 mA h g^-1 at a current density of 1 A g^-1 with 85.72% capacity retention even after 5000 cycles at a current density of as high as 8 A g^-1, suggesting its great promise in practical applications for BSH devices. By integrating activated carbon as the anode with the as-obtained bimetallic selenides as the cathode, an alkaline aqueous BSH device is fabricated and delivers a high energy density of 37.54 W h kg^-1 at a high power density of 842.7 W kg^-1. It is found that the excellent electrochemical performances can be ascribed to facile ion and electron transport pathways, high electrical conductivity and reliable structural robustness of the prepared selenides. Moreover, the synthetic strategy presented in this paper opens up an avenue to guide the synthesis of various anion doped bimetallic compounds towards high-performance energy conversion and storage devices.

Sub-Nanometer Thick Gold Nanosheets as Highly Efficient Catalysts

2D metal nanomaterials offer exciting prospects in terms of their properties and functions. However, the ambient aqueous synthesis of atomically-thin, 2D metallic nanomaterials represents a significant challenge. Herein, freestanding and atomically-thin gold nanosheets with a thickness of only 0.47 nm (two atomic layers thick) are synthesized via a one-step aqueous approach at 20 °C, using methyl orange as a confining agent. Owing to the high surface-area-to-volume ratio, abundance of unsaturated atoms exposed on the surface and large interfacial areas arising from their ultrathin 2D nature, the as-prepared Au nanosheets demonstrate excellent catalysis performance in the model reaction of 4-nitrophenol reduction, and remarkable peroxidase-mimicking activity, which enables a highly sensitive colorimetric sensing of H2O2 with a detection limit of 0.11 × 10-6 m. This work represents the first fabrication of freestanding 2D gold with a sub-nanometer thickness, opens up an innovative pathway toward atomically-thin metal nanomaterials that can serve as model systems for inspiring fundamental advances in materials science, and holds potential across a wide region of applications.

Toward Room-Temperature Magnetic Semiconductors in Two-Dimensional Ferrimagnetic Organometallic Lattices

Obtaining room-temperature magnetically ordered two-dimensional (2D) semiconductors is urgently needed for high-speed nanospintronic devices but remains a big challenge. Here, we propose a potential route to solve this issue by constructing ferrimagnetic semiconductors in 2D metal organic frameworks, taking advantage of the high Curie temperature of ferrimagnetic semiconductors and easy tunability of metal organic frameworks. The proposal is confirmed by first-principles design of 2D metal organic frameworks with conjugated electron acceptors diketopyrrolopyrrole (DPP) as organic linkers and transition metal Cr (V) as nodes. The robust ferrimagnetic ordering comes from the strong direct exchange interaction between d-electron magnetic moments on transition metals and charge transfer-induced p-electron magnetic moments on DPPs, which can be modulated facilely by reducing the d-p orbital interaction distance via moderate compressive strain or increasing the d-p orbital charge transfer through introducing electron-withdrawing groups into the DPP moiety.

Fast and controlled growth of two-dimensional layered ZrTe3 nanoribbons by chemical vapor deposition

We first demonstrated ZrTe₃ nanoribbons can be grown directly by chemical vapor deposition method, which exhibit intriguing magnetic properties.

Screening and Design of Novel 2D Ferromagnetic Materials with High Curie Temperature above Room Temperature

Two-dimensional (2D) intrinsic ferromagnets with high Curie temperature ( T_C) are desirable for spintronic applications. Using systematic first-principles calculations, we investigate the electronic and magnetic properties of 22 monolayer 2D materials with layered bulk phases. From these candidates, we screen out five ferromagnetic monolayer materials belonging to three types of structures: type i (ScCl, YCl, LaCl), type ii (LaBr₂), and type iii (CrSBr). Type i is a kind of metallic ferromagnetic material, whereas LaBr₂ and CrSBr of type ii and iii are small-bandgap ferromagnetic semiconductors with T_C near room temperature. Moreover, the ferromagnetic CrSBr monolayer possesses a large magnetic moment of ∼3 μ_B per Cr atom, originating from its distorted octahedron coordination. The robust ferromagnetism of the CrSBr monolayer is ascribed to the halogen-mediated (Cr-Br-Cr) and chalcogen-mediated (Cr-S-Cr) superexchange interactions; then, an isoelectronic substitution strategy is proposed to tailor the magnetic coupling strength. Hence, monolayer structures of CrSI, CrSCl, and CrSeBr with notably enhanced Curie temperature up to 500 K as well as favorable formation energy are designed. The moderate interlayer binding energy and high T_C make these monolayer ferromagnetic materials feasible for experimental synthesis and attractive as 2D spintronic devices.

Phase Transition of Two-Dimensional β-Ga2O3 Nanosheets from Ultrathin γ-Ga2O3 Nanosheets and Their Photocatalytic Hydrogen Evolution Activities

Monoclinic β-Ga₂O₃ nanosheets hold great potential applications in electronic, optical, and photocatalytic fields. In this study, two-dimensional β-Ga₂O₃ nanosheets were successfully fabricated through a simple crystalline phase transition from the as-prepared ultrathin γ-Ga₂O₃ nanosheets. The photocatalytic hydrogen evolution reaction under UV light irradiation was achieved on the two kinds of photocatalysts. However, β-Ga₂O₃ with a higher crystallinity shows a lower photocatalytic activity in comparison with γ-Ga₂O₃. The average apparent quantum yield is calculated to be 0.29% for β-Ga₂O₃ nanosheets and 1.82% for γ-Ga₂O₃. More efficient separation and transfer rates of photogenerated carriers and larger specific areas were found in γ-Ga₂O₃. On the basis of the analysis of the structures of γ-Ga₂O₃ and β-Ga₂O₃, it is proposed that the disordered or defective structure contributes to the improvement of photocatalytic activity to some extent. Therefore, it is significant to develop the photocatalyst with a stable structure and a certain number of defects at the same time.

Achieving Ultrafast and Stable Na-Ion Storage in FeSe2 Nanorods/Graphene Anodes by Controlling the Surface Oxide

Designing transitional metal selenides (TMSes) with superior rate and cyclic performance for sodium-ion storage remains great challenges. To achieve this task, the influence of surface oxides on Na-ion storage behavior of FeSe₂ is investigated by designing FeSe₂ with varying oxide content. It is found that surface oxide has an inhibitory effect on the activity of FeSe₂. Small-sized FeSe₂ on graphene with higher surface oxide content exhibits obviously inferior performance compared to large-sized FeSe₂ with lower oxide content. By controlling oxide content, the prepared FeSe₂ nanorods/graphene exhibits a high capacity of 459 mAh/g at 0.1 A/g and superior rate performance. Only 10% capacity decrease occurs with the increase in current density from 0.1 to 5 A/g. Even at 25 A/g (∼50 C), it delivers a capacity of 227 mAh/g with almost no decay after 800 cycles. The influence mechanism of surface oxide is investigated. The oxide can be converted to a sodiated shell with high mechanical strength and poor conductivity, which generates phase-transition resistance to suppress the sodiation of FeSe₂ core, blocks the transfer of Na-ions and electrons in subsequent sodiation processes. Understanding the effect of surface oxide on Na-ion storage will be helpful in designing TMSes and other active materials.

Emerging chemical strategies for imprinting magnetism in graphene and related 2D materials for spintronic and biomedical applications

Graphene, a single two-dimensional sheet of carbon atoms with an arrangement mimicking the honeycomb hexagonal architecture, has captured immense interest of the scientific community since its isolation in 2004. Besides its extraordinarily high electrical conductivity and surface area, graphene shows a long spin lifetime and limited hyperfine interactions, which favors its potential exploitation in spintronic and biomedical applications, provided it can be made magnetic. However, pristine graphene is diamagnetic in nature due to solely sp2 hybridization. Thus, various attempts have been proposed to imprint magnetic features into graphene. The present review focuses on a systematic classification and physicochemical description of approaches leading to equip graphene with magnetic properties. These include introduction of point and line defects into graphene lattices, spatial confinement and edge engineering, doping of graphene lattice with foreign atoms, and sp3 functionalization. Each magnetism-imprinting strategy is discussed in detail including identification of roles of various internal and external parameters in the induced magnetic regimes, with assessment of their robustness. Moreover, emergence of magnetism in graphene analogues and related 2D materials such as transition metal dichalcogenides, metal halides, metal dinitrides, MXenes, hexagonal boron nitride, and other organic compounds is also reviewed. Since the magnetic features of graphene can be readily masked by the presence of magnetic residues from synthesis itself or sample handling, the issue of magnetic impurities and correct data interpretations is also addressed. Finally, current problems and challenges in magnetism of graphene and related 2D materials and future potential applications are also highlighted.

Nanostructure selenium compounds as pseudocapacitive electrodes for high-performance asymmetric supercapacitor

The electrochemical performance of an energy conversion and storage device like the supercapacitor mainly depends on the microstructure and morphology of the electrodes. In this paper, to improve the capacitance performance of the supercapacitor, the all-pseudocapacitive electrodes of lamella-like Bi₁₈SeO₂₉/BiSe as the negative electrode and flower-like Co_0.85Se nanosheets as the positive electrode are synthesized by using a facile low-temperature one-step hydrothermal method. The microstructures and morphology of the electrode materials are carefully characterized, and the capacitance performances are also tested. The Bi₁₈SeO₂₉/BiSe and Co_0.85Se have high specific capacitance (471.3 F g^-1 and 255 F g^-1 at 0.5 A g^-1), high conductivity, outstanding cycling stability, as well as good rate capability. The assembled asymmetric supercapacitor completely based on the pseudocapacitive electrodes exhibits outstanding cycling stability (about 93% capacitance retention after 5000 cycles). Moreover, the devices exhibit high energy density of 24.2 Wh kg^-1 at a power density of 871.2 W kg^-1 in the voltage window of 0-1.6 V with 2 M KOH solution.

Half-Metallic Behavior in 2D Transition Metal Dichalcogenides Nanosheets by Dual-Native-Defects Engineering

Two-dimensional transition metal dichalcogenides (TMDs) have been regarded as one of the best nonartificial low-dimensional building blocks for developing spintronic nanodevices. However, the lack of spin polarization in the vicinity of the Fermi surface and local magnetic moment in pristine TMDs has greatly hampered the exploitation of magnetotransport properties. Herein, a half-metallic structure of TMDs is successfully developed by a simple chemical defect-engineering strategy. Dual native defects decorate titanium diselenides with the coexistence of metal-Ti-atom incorporation and Se-anion defects, resulting in a high-spin-polarized current and local magnetic moment of 2D Ti-based TMDs toward half-metallic room-temperature ferromagnetism character. Arising from spin-polarization transport, the as-obtained T-TiSe_1.8 nanosheets exhibit a large negative magnetoresistance phenomenon with a value of -40% (5T, 10 K), representing one of the highest negative magnetoresistance effects among TMDs. It is anticipated that this dual regulation strategy will be a powerful tool for optimizing the intrinsic physical properties of TMD systems.

Nontopotactic Reaction in Highly Reversible Sodium Storage of Ultrathin Co9 Se8 /rGO Hybrid Nanosheets

Transition metal chalcogenide with tailored nanosheet architectures with reduced graphene oxide (rGO) for high performance electrochemical sodium ion batteries (SIBs) are presented. Via one-step oriented attachment growth, a facile synthesis of Co₉ Se₈ nanosheets anchored on rGO matrix nanocomposites is demonstrated. As effective anode materials of SIBs, Co₉ Se₈ /rGO nanocomposites can deliver a highly reversible capacity of 406 mA h g^-1 at a current density of 50 mA g^-1 with long cycle stability. It can also deliver a high specific capacity of 295 mA h g^-1 at a high current density of 5 A g^-1 indicating its high rate capability. Furthermore, ex situ transmission electron microscopy observations provide insight into the reaction path of nontopotactic conversion in the hybrid anode, revealing the highly reversible conversion directly between the hybrid Co₉ Se₈ /rGO and Co nanoparticles/Na₂ Se matrix during the sodiation/desodiation process. In addition, it is experimentally demonstrated that rGO plays significant roles in both controllable growth and electrochemical conversion processes, which can not only modulate the morphology of the product but also tune the sodium storage performance. The investigation on hybrid Co₉ Se₈ /rGO nanosheets as SIBs anode may shed light on designing new metal chalcogenide materials for high energy storage system.

Two-Dimensional Metal-Free Organic Multiferroic Material for Design of Multifunctional Integrated Circuits

Coexistence of ferromagnetism and ferroelectricity in a single 2D material is highly desirable for integration of multifunctional units in 2D material-based circuits. We report theoretical evidence of C₆N₈H organic network as being the first 2D organic multiferroic material with coexisting ferromagnetic and ferroelectric properties. The ferroelectricity stems from multimode proton-transfer within the 2D C₆N₈H network, in which a long-range proton-transfer mode is enabled by the facilitation of oxygen molecule when the network is exposed to the air. Such oxygen-assisted ferroelectricity also leads to a high Curie temperature and coupling between ferroelectricity and ferromagnetism. We also find that hydrogenation and carbon doping can transform the 2D g-C₃N₄ network from an insulator to an n-type/p-type magnetic semiconductor with modest bandgap. Akin to the dopant induced n/p channels in silicon wafer, a variety of dopant created functional units can be integrated into the g-C₃N₄ wafer by design for nanoelectronic applications.

Recent Advances in Ultrathin Two-Dimensional Nanomaterials

Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocatalysis, batteries, supercapacitors, solar cells, photocatalysis, and sensing platforms. Finally, the challenges and outlooks in this promising field are featured on the basis of its current development.

Atomically thin SiC nanoparticles obtained via ultrasonic treatment to realize enhanced catalytic activity for the oxygen reduction reaction in both alkaline and acidic media

Atomically thin SiC derived from commercial SiC and possesses prominent ORR catalytic activity, comparable with Pt/C. The ORR process is dominated by a 4-electron pathway. Atomically thin SiC also exhibited outstanding durability and methanol crossover resistance.

Atomically thin non-layered nanomaterials for energy storage and conversion

The research progress of atomically thin non-layered nanomaterials on energy storage and conversion applications is reviewed in this work.

Facile Synthesis of Co9Se8 Quantum Dots as Charge Traps for Flexible Organic Resistive Switching Memory Device

Uniform Co₉Se₈ quantum dots (CSQDs) were successfully synthesized through a facile solvothermal method. The obtained CSQDs with average size of 3.2 ± 0.1 nm and thickness of 1.8 ± 0.2 nm were demonstrated good stability and strong fluorescence under UV light after being easily dispersed in both of N,N-dimethylformamide (DMF) and deionized water. We demonstrated the flexible resistive switching memory device based on the hybridization of CSQDs and polyvinylpyrrolidone (PVP) (CSQDs-PVP). The device with the Al/CSQDs-PVP/Pt/poly(ethylene terephthalate) (PET) structure represented excellent switching parameters such as high ON/OFF current ratio, low operating voltages, good stability, and flexibility. The flexible resistive switching memory device based on hybridization of CSQDs and PVP has a great potential to be used in flexible and high-performance memory applications.

Two dimensional layered Co0.85Se nanosheets as a high-capacity anode for lithium-ion batteries

In recent years, two-dimensional (2D) layered transitional metal chalcogenides (TMCs) have received much attention as promising electrode materials in energy storage. Although recent reports on 2D TMC nanostructures have demonstrated promising electrochemical performances, the major scientific challenge is to develop a viable synthesis process to produce layered structures of chalcogenides (Co, Ni or Fe based TMCs) as anode materials. In this work, we propose the synthesis of layered Co0.85Se nanosheets in a solution based method by using a 2D oriented attachment strategy. The as-prepared Co0.85Se nanosheets exhibit specific capacities as high as 675 mA h g(-1) at 100 mA g(-1). When the current densities were further increased to 200, 500 and 1000 mA g(-1), the reversible capacities can still reach up to 645, 574 and 493 mA h g(-1) with excellent cycling life of 95, 85 and 73%, respectively. Li-ion storage performance of layered Co0.85Se nanosheets is higher than that of Co0.85Se microspheres as well as cobalt sulfide. The superior electrochemical performance of Co0.85Se nanosheets is attributed to their 2D layered structure which enhances electrical conductivity and improves diffusion pathways of the Li-ion within the host material. The synthesis method described in this work serves as a general route for the design and preparation of other 2D layered TMCs.

Seeded preparation of ultrathin FeS2 nanosheets from Fe3O4 nanoparticles

FeS2 nanomaterials with two-dimensional features hold great promise for electrochemical and photovoltaic applications. However, the preparation of ultrathin FeS2 nanosheets is still challenging because of the lack of a tailor-made approach. In this work, FeS2 nanosheets with a thickness of 2.1 nm are prepared through a Fe3O4-seeded approach. Uniform Fe3O4 nanoparticles are foremost synthesized via the standard method in organic media. The injection of a S solution leads to the replacement of O in Fe3O4 through anion-exchange, which generates (110) facet-enriched FeS2 nuclei. The subsequent (110) facet-mediated oriented attachment and fusion of FeS2 nuclei produce ultrathin FeS2 nanosheets. As catalysts in the hydrogen evolution reaction, FeS2 nanosheets exhibit good electrochemical activity.

A completely controlled sphere-to-bilayer micellar transition: the molecular mechanism and application on the growth of nanosheets

The combination of a simple modification of the sample addition method to generate a sort of continuously accumulated external stimulation with only minute increments in amplitude and the introduction of probe molecules (herein aniline) within the micelle allow the direct continuous in situ spectroscopic monitoring of possible micellar transitions. In this way, a sphere-to-ellipsoid and further an ellipsoid-to-bilayer micellar transition of sodium dodecyl sulfate (SDS) induced by camphor sulfuric acid (CSA) is observed to experience four stages in the time sequence: (i) the accumulated protons released from CSA in the hydration layer of the micelle stimulate the rearrangement of SDS micelles; (ii) the micelles transform into ellipsoidal shapes as evidenced by the characteristic chemical shift anisotropy and the corresponding molecular dynamic properties from probe molecules; (iii) further protonation of aniline induces the micelle to turn into lamellar structures; (iv) aniline is freed from the micelle while leaving the SDS bilayers undistorted. Moreover, polyaniline nanosheets incorporating SDS bilayers in sandwich structures, which can display excellent capacitive behavior at relatively high current densities for the fabricated supercapacitors, are prepared from the aniline oriented by the bending energy of the SDS bilayers.