Facile, Solution-Based Synthesis of Soft, Nanoscale Janus Particles with Tunable Janus Balance

Janus Composite Particles and Interfacial Catalysis Thereby

Janus composite particles (JPs) with distinct compartmentalization of varied components thus performances and anisotropic shape display a variety of properties and have demonstrated great potentials in diversify practical applications. Especially, the catalytic JPs are advantageous for multi-phase catalysis with much easier separation of products and recycling the catalysts. In the first section of this review, typical methods to synthesize the JPs with varied morphologies are briefly surveyed in the category of polymeric, inorganic and polymer/inorganic composite. In the main section, recent progresses of the JPs in emulsion interfacial catalysis are summarized covering organic synthesis, hydrogenation, dye degradation, and environmental chemistry. The review will end by calling more efforts toward precision synthesis of catalytic JPs at large scale to meet the stringent requirements in practical applications such as catalytic diagnosis and therapy by the functional JPs.

Janus nanoplates, -bowls, and -cups: controlling size and curvature via terpolymer/homopolymer blending in 3D confinement

The synthesis and properties of Janus nanoparticles with spherical, cylindrical, and disk-like shapes are nowadays rather well understood. Other topologies such as nanorings and bowl-shaped Janus nanoparticles are believed to show distinctly different solution behavior and interaction with interfaces, but limitations in their synthesis currently prevents a proper investigation of these properties. Especially the combination of shape- and surface-anisotropy of bowl-shaped Janus nanoparticles could result in enhanced selectivity in uptake of cargo and enhanced directional diffusion. We here produce bowl-shaped Janus nanoparticles without noticeable side products through evaporation-induced confinement assembly (EICA) of triblock terpolymers blended with high molecular weight homopolymer. The triblock terpolymer phase separates from the homopolymer into spherical domes, where the terpolymer adopts a hemispherical lamella-lamella morphology (ll). Selective cross-linking, removal of the homopolymer, and disassembly of the microparticles releases the bowl-shaped Janus nanoparticles. The amount of blended homopolymer determines the size of the spherical dome, allowing to control particle curvature into flat Janus nanoplates, hemispherical Janus nanobowls, and deep Janus nanocups. The use of Shirasu Porous Glass (SPG) membranes with pore sizes in the range of dpore = 0.2-2.0 μm further provides control of particle diameter. Size and shape were analyzed with electron microscopy and the Janus character through selective surface decoration. The diffusion behavior of bowl-shaped Janus nanoparticles was investigated depending on particle curvature and anisotropy using angle-dependent dynamic light scattering.

Molecular Engineering of Colloidal Atoms

Creation of architectures with exquisite hierarchies actuates the germination of revolutionized functions and applications across a wide range of fields. Hierarchical self-assembly of colloidal particles holds the promise for materialized realization of structural programing and customizing. This review outlines the general approaches to organize atom-like micro- and nanoparticles into prescribed colloidal analogs of molecules by exploiting diverse interparticle driving motifs involving confining templates, interactive surface ligands, and flexible shape/surface anisotropy. Furthermore, the self-regulated/adaptive co-assembly of simple unvarnished building blocks is discussed to inspire new designs of colloidal assembly strategies.

Stepwise assembly of heterometallic, heteroleptic "triblock Janus-type" metal-organic polyhedra

Increasing the chemical complexity of metal-organic cages (MOCs) or polyhedra (MOPs) demands control over the simultaneous organization of diverse organic linkers and metal ions into discrete caged structures. Herein, we show that a pre-assembled complex of the archetypical cuboctahedral MOP can be used as a template to replicate such caged structure, one having a "triblock Janus-type" configuration that is both heterometallic and heteroleptic.

Multicompartment polymeric colloids from functional precursor Microgel: Synthesis in continuous process

Raspberry-like poly(oligoethylene methacrylate-b-N-vinylcaprolactam)/polystyrene (POEGMA-b-PVCL/PS) patchy particles (PPs) and complex colloidal particle clusters (CCPCs) were fabricated in two-, and one-step (cascade) flow process. Surfactant-free, photo-initiated reversible addition-fragmentation transfer (RAFT) precipitation polymerization (Photo-RPP) was used to develop internally cross-linked POEGMA-b-PVCL microgels with narrow size distribution. Resulting microgel particles were then used to stabilize styrene seed droplets in water, producing raspberry-like PPs. In the cascade process, different hydrophobicity between microgel and PS induced the self-assembly of the first formed raspberry particles that then polymerized continuously in a Pickering emulsion to form the CCPCs. The internal structure as well as the surface morphology of PPs and CCPCs were studied as a function of polymerization conditions such as flow rate/retention time (Rt), temperature and the amount of used cross-linker. By performing Photo-RPP in tubular flow reactor we were able to gained advantages over heat dissipation and homogeneous light distribution in relation to thermally-, and photo-initiated bulk polymerizations. Tubular reactor also enabled detailed studies over morphological evolution of formed particles as a function of flow rate/Rt.

Starch Janus Particles: Bulk Synthesis, Self-Assembly, Rheology, and Potential Food Applications

Although incredible progress in the field of Janus particles over the last three decades has delivered many promising smart-material prototypes, from cancer-targeting drug delivery vehicles to self-motile nanobots, their real-world applications have been somewhat tempered by concerns over scalability and sustainability. In this study, we adapt a simple, scalable 3D mask method to synthesize Janus particles in bulk using starch as the base material: a natural biopolymer that is safe, biocompatible, biodegradable, cheap, widely available, and versatile. Using this method, starch granules are first embedded on a wax droplet such that half of the starch is covered; then, the uncovered half is treated with octenyl succinic anhydride, after which the wax coating is removed. Janus particles with 49% Janus balance can be produced in this way and were observed to self-assemble into wormlike strings in water due to their hydrophobic/hydrophilic nature. Our Janus starch granules outperform the non-Janus controls as thickening and gelling agents: they exhibit a fourfold increase in water-holding capacity, a 30% lower critical caking concentration, and a viscosity greater by orders of magnitude. They also form gels that are much firmer and more stable. Starch Janus particles with these functional properties can be used as novel, lower-calorie, highly efficient, plant-based super-thickeners in the food industry, potentially reducing starch use in food by 55%.

Fabrication of diverse multicompartment micelles by redispersion of triblock terpolymer bulk morphologies

Redispersing block copolymer (BCP) bulk films in selective solvents is a simple and efficient method to prepare BCP micelles and polymersomes. While ABC triblock terpolymers are known to form multicompartment micelles (MCMs) with intricate nanoarchitecture, this is typically done by solvent exchange instead of redispersion of bulk films despite obvious advantages of greatly reduced solvent usage. Here, we provide guidelines on how to form MCMs with defined shapes and inner structure through direct redispersion of terpolymer bulk morphologies in selective plasticizing solvents. For this purpose, we redisperse a series of polystyrene-b-polybutadiene-b-poly(tert-butyl methacrylate) (PS-b-PB-b-PT) triblock terpolymers in acetone/isopropanol mixtures, where PT is always soluble, PB always insoluble, and PS will range from soft (high acetone content) to kinetically frozen (high isopropanol content). We investigate the effect of solvent mixtures, block composition, and thermal annealing on MCM shape and core morphology. Additionally, we performed terpolymer blend experiments to open up a simple route to further diversify the range of accessible MCM morphologies.

Application of Janus Particles in Point-of-Care Testing

Janus particles (JPs), named after the two-faced Roman god, are asymmetric particles with different chemical properties or polarities. JPs have been widely used in the biomedical field in recent years, including as drug carriers for targeted controlled drug release and as biosensors for biological imaging and biomarker detection, which is crucial in the early detection and treatment of diseases. In this review, we highlight the most recent advancements made with regard to Janus particles in point-of-care testing (POCT). Firstly, we introduce several commonly used methods for preparing Janus particles. Secondly, we present biomarker detection using JPs based on various detection methods to achieve the goal of POCT. Finally, we discuss the challenges and opportunities for developing Janus particles in POCT. This review will facilitate the development of POCT biosensing devices based on the unique properties of Janus particles.

Formation of n-Hexane-in-DMF Nonaqueous Pickering Emulsions: ABC Triblock Worms versus AB Diblock Worms

Nonaqueous Pickering emulsions exhibit promising applications in many industrial areas but have been relatively less studied in the past. In this study, n-hexane-in-DMF nonaqueous Pickering emulsions stabilized by core cross-linked copolymer worms with mixed shells are demonstrated for the first time. Core cross-linked copolymer worms with mixed shells were prepared by seeded reversible addition-fragmentation chain transfer (RAFT) quasi-solution polymerization. Specifically, polystyrene-poly(4-vinylpyridine) (PS-P4VP) diblock copolymer worms were first prepared via RAFT-mediated dispersion polymerization in toluene under the given conditions using PS as both the macro-CTA and the stabilizer block. After the chemical cross-linking of P4VP cores, PS-P4VP diblock copolymer worms were chain-extended with LMA in DMF/toluene (1:9, weight ratio) mixed solvents, producing core cross-linked PS-P4VP-PLMA worms with PS/PLMA mixed shells. The as-prepared core cross-linked PS-P4VP-PLMA worms with mixed PS/PLMA shells were further utilized as Pickering emulsifiers for the generation of nonaqueous n-hexane-in-DMF Pickering emulsions. The emulsifying performances of mixed-shell copolymer worms were compared with those of their spherical and linear analogues with entirely identical chemical compositions as well as PS-P4VP diblock copolymer worm precursors, respectively.

Preparation of asymmetric particles by controlling the phase separation of seeded emulsion polymerization with ethanol/water mixture

Alcohols are discovered for the first time to tune the morphology of poly(vinyl benzyl chloride)-poly(3-methacryloxypropyltrimethoxysilane) (PVBC-PMPS) composite particles through seeded emulsion polymerization within the alcohol/water mixture. Here, monodispersed linear PVBC particles was synthesized through the dispersion polymerization and employed as the seeds. The as-obtained PVBC-PMPS composite particles could be dramatically tuned from core-shell structures to snowman-like particles, to dumbbell-shaped particles, to inverse snowman-like particles when the ethanol content in reaction mixtures is only adjusted within a narrow range. The morphology of fresh PMPS bulges was observed after removing the linear PVBC seeds with N,N'-dimethyl formamide, and their formation mechanism was studied by monitoring the free radical polymerization and sol-gel process of 3-methacryloxypropyltrimethoxysilane. It has been confirmed that the sol-gel kinetics were the main factor on the particles' morphology. In addition, morphologies of PVBC-PMPS particles were also varied by the MPS feeding amount, types of the co-solvent and pH values of alcohol/water mixtures.

Janus Droplet Formation via Thermally Induced Phase Separation: A Numerical Model with Diffusion and Convection

Microscale Janus particles have versatile potential applications in many physical and biomedical fields, such as microsensor, micromotor, and drug delivery. Here, we present a phase-field approach of multicomponent and multiphase to investigate the Janus droplet formation via thermally induced phase separation. The crucial kinetics for the formation of Janus droplets consisting of two polymer species and a solvent component via an interplay of both diffusion and convection is considered in the Cahn-Hilliard-Navier-Stokes equation. The simulation results of the phase-field model show that unequal interfacial tensions between the two polymer species and the solvent result in asymmetric phase separation in the formation process of Janus droplets. This asymmetric phase separation plays a vital role in the establishment of the so-called core-shell structure that has been observed in previous experiments. By varying the droplet size, the surface tension, and the molecular interaction between the polymer species, several novel droplet morphologies are predicted in the development process of Janus droplets. Moreover, we stress that the hydrodynamics should be reckoned as a non-negligible mechanism that not only accelerates the Janus droplet evolution but also has great impacts on the coarsening and coalescence of the Janus droplets.

Shedding Light on Luminescent Janus Nanoparticles: From Synthesis to Photoluminescence and Applications

Luminescent Janus nanoparticles refer to a special category of Janus-based nanomaterials that not only exhibit dual-asymmetric surface nature but also attractive optical properties. The introduction of luminescence has endowed conventional Janus nanoparticles with many alluring light-responsive functionalities and broadens their applications in imaging, sensing, nanomotors, photo-based therapy, etc. The past few decades have witnessed significant achievements in this field. This review first summarizes well-established strategies to design and prepare luminescent Janus nanoparticles and then discusses optical properties of luminescent Janus nanoparticles based on downconversion and upconversion photoluminescence mechanisms. Various emerging applications of luminescent Janus nanoparticles are also introduced. Finally, opportunities and future challenges are highlighted with respect to the development of next-generation luminescent Janus nanoparticles with diverse applications.

Confinement-Assembly of Terpolymer-based Janus Nanoparticles

While the confinement assembly of block copolymers (BCPs) into functional microparticles has been extensively studied, little is known about the behavior of Janus nanoparticles (JNPs) in spherical confinement. Here, we investigate the confinement self-assembly of JNPs in drying emulsion droplets and compare their behavior to their ABC triblock terpolymer precursor. Emulsions of both materials were prepared using Shirasu Porous Glass (SPG) membranes leading to narrow size distributions of the microparticles with average hydrodynamic radii in the range of R_h = 250 - 500 nm (depending on the pore radius, R_pore ). The internal structure of the microparticles was verified with transmission electron microscopy (TEM) on ultrathin cross-sections and compared to the corresponding bulk morphologies. While the confinement-assembly of terpolymers resulted in microparticles with ordered inner morphologies, order for JNPs diminished when the Janus balance (JB) deviated from parity. This article is protected by copyright. All rights reserved.

Customizable nano-sized colloidal tetrahedrons by polymerization-induced particle self-assembly (PIPA)

Colloidal molecules (CMs) are colloidal clusters with molecule-like symmetry and architecture, generated from the self-assembly of nanoparticles with attractive patches. However, large-scale preparation of patchy nanoparticles remains challenging. Here, we...

Poly(vinylpyridine)-Containing Block Copolymers for Smart, Multicompartment Particles

Multicompartment particles generated by the self-assembly of block copolymers (BCPs) have received considerable attention due to their unique morphologies and functionalities. A class of important building blocks for multicomponent particles...

Dual Nanomechanics in Anisotropic Porous Covalent Organic Framework Janus-Type Thin Films

Empowered by crystalline ordered structures and homogeneous fabrication techniques, covalent organic frameworks (COFs) have been realized with uniform morphologies and isotropic properties. However, such homogeneity often hinders various surface-dependent properties observed in asymmetric nanostructures. The challenge remains to induce heterogeneity in COFs by creating an asymmetric superstructure such as a Janus thin film. In this regard, we propose a versatile yet straightforward interfacial layer-grafting strategy to fabricate free-standing Janus-type COF-graphene thin films. Herein, two-dimensional graphene sheets were utilized as the suitable grafter due to the possibility of noncovalent interactions between the layers. The versatility of the approach was demonstrated by fabricating two distinct Janus-type films, with the COF surface interwoven with nanofibers and nanospheres. The Janus-type films showcase opposing surface morphologies originating from graphene sheets and COF nanofibers or nanospheres, preserving the porosity (552-600 m² g^-1). The unique surface chemistries of the constituent layers further endow the films with orthogonal mechanical properties, as confirmed by the nanoindentation technique. Interestingly, the graphene sheets favor the Janus-type assembly of COF nanofibers over the nanospheres. This is reflected in the better nanomechanical properties of COF_fiber-graphene films (E_graphene = 300-1200 MPa; E_COF = 15-60 MPa) compared to the COF_sphere-graphene films (E_graphene = 11-14 MPa; E_COF = 2-5 MPa). These results indicate a direct relationship between the mechanical properties and homo/heterogeneity of Janus-type COF films.

Intercluster Exchange-Stabilized Novel Complex Colloidal χc Phase

Designing complex cluster crystals with a specific function using simple colloidal building blocks remains a challenge in materials science. Herein, we propose a conceptually new design strategy for constructing complex cluster crystals via hierarchical self-assembly of simple soft Janus colloids. A novel and previously unreported colloidal cluster-χ (χ_c) phase, which resembles the essential structural features of α-manganese but at a larger length scale, is obtained through molecular dynamics simulations. The formation of the χ_c phase undergoes a remarkable two-step self-assembly process, that is, the self-assembly of clusters with specific size dispersity from Janus colloids, followed by the highly ordered organization of these clusters. More importantly, the dynamic exchange of particles between these clusters plays a critical role in stabilizing the χ_c phase. Such a conceptual design framework based on intercluster exchange has the potential to effectively construct novel complex cluster crystals by hierarchical self-assembly of colloidal building blocks.

Inhibition of Amyloid Aggregation and Toxicity with Janus Iron Oxide Nanoparticles

Amyloid aggregation is a ubiquitous form of protein misfolding underlying the pathologies of Alzheimer's disease (AD), Parkinson's disease (PD) and type 2 diabetes (T2D), three primary forms of human amyloid diseases. While much has been learned about the origin, diagnosis and management of these neurological and metabolic disorders, no cure is currently available due in part to the dynamic and heterogeneous nature of the toxic oligomers induced by amyloid aggregation. Here we synthesized beta casein-coated iron oxide nanoparticles (βCas IONPs) via a BPA-P(OEGA-b-DBM) block copolymer linker. Using a thioflavin T kinetic assay, transmission electron microscopy, Fourier transform infrared spectroscopy, discrete molecular dynamics simulations and cell viability assays, we examined the Janus characteristics and the inhibition potential of βCas IONPs against the aggregation of amyloid beta (Aβ), alpha synuclein (αS) and human islet amyloid polypeptide (IAPP) which are implicated in the pathologies of AD, PD and T2D. Incubation of zebrafish embryos with the amyloid proteins largely inhibited hatching and elicited reactive oxygen species, which were effectively rescued by the inhibitor. Furthermore, Aβ-induced damage to mouse brain was mitigated in vivo with the inhibitor. This study revealed the potential of Janus nanoparticles as a new nanomedicine against a diverse range of amyloid diseases.

Synthesis of Polymer Janus Particles with Tunable Wettability Profiles as Potent Solid Surfactants to Promote Gas Delivery in Aqueous Reaction Media

Janus particles exhibit a strong tendency to directionally assemble and segregate to interfaces and thus offer advantages as colloidal analogues of molecular surfactants to improve the stability of multiphasic mixtures. Investigation and application of the unique adsorption properties require synthetic procedures that enable careful design and reliable control over the particles' asymmetric chemistry and wettability profiles with high morphological uniformity across a sample. Herein, we report on a novel one-step synthetic approach for the generation of amphiphilic polymer Janus particles with highly uniform and tunable wettability contrasts, which is based on using reconfigurable bi-phasic Janus emulsions as versatile particle scaffolds. Two phase-separated acrylate oils were used as the constituent droplet phases and transformed into their solidified Janus particle replicas via UV-induced radical polymerization. Using Janus emulsions as particle precursors offers the advantage that their internal droplet geometry can be fine-tuned by changing the force balance of surface tensions acting at the individual interfaces via surfactants or the volume ratio of the constituent phases. In addition, preassembled functional surfactants at the droplet interfaces can be locked in position upon polymerization, which enables both access toward postfunctionalization reaction schemes and the generation of highly uniform Janus particles with adjustable wettability profiles. Depending on the particle morphology and wettability, their interfacial position can be adjusted, which allows us to stabilize either air bubbles-in-water or water droplets-in-air (liquid marbles). Motivated by the interfacial activity of the particles and particularly the longevity of the resulting particle-stabilized air-in-water bubbles, we explored their ability to promote the delivery of oxygen inside a liquid-phase reaction medium, namely, for the heterogeneous Au-NP-mediated catalytic oxidation of d-glucose. We observed a 2.2-fold increase in the reaction rate attributed to the increase of the local concentration of oxygen around catalysts, thus showcasing a new strategy to overcome the limited solubility of gases in aqueous reaction media.

Janus Nanoparticles: From Fabrication to (Bio)Applications

Janus nanoparticles (JNPs) refer to the integration of two or more chemically discrepant composites into one structure system. Studies into JNPs have been of significant interest due to their interesting characteristics stemming from their asymmetric structures, which can integrate different functional properties and perform more synergetic functions simultaneously. Herein, we present recent progress of Janus particles, comprehensively detailing fabrication strategies and applications. First, the classification of JNPs is divided into three blocks, consisting of polymeric composites, inorganic composites, and hybrid polymeric/inorganic JNPs composites. Then, the fabrication strategies are alternately summarized, examining self-assembly strategy, phase separation strategy, seed-mediated polymerization, microfluidic preparation strategy, nucleation growth methods, and masking methods. Finally, various intriguing applications of JNPs are presented, including solid surfactants agents, micro/nanomotors, and biomedical applications such as biosensing, controlled drug delivery, bioimaging, cancer therapy, and combined theranostics. Furthermore, challenges and future works in this field are provided.

Melting Behavior of Bimetallic and Trimetallic Nanoparticles: A Review of MD Simulation Studies

In recent years, bimetallic and trimetallic nanoparticles (NPs) have become attractive materials for many researchers especially in the field of catalysis due to their interesting physical and chemical properties. These unique properties arise mainly from simultaneous effects of two different metal atoms in their structure. In this review, recent theoretical studies on these NPs using molecular dynamics simulation are presented. Since investigation of thermodynamic stabilities of metallic NPs is a critical factor in their construction for catalytic applications, our focus in this review is on the thermal stability of bimetallic and trimetallic NPs. The melting behavior of these materials with different atomic arrangements including core-shell, three-shell, crown-jewel, ordered and disordered alloy, and Janus materials are discussed. Other factors including stress, strain, atomic radius, thermal expansion coefficient, cohesive energy, surface energy, size, composition, and morphology are described in detail, because these properties lead to complexity in the melting behavior of bimetallic and trimetallic NPs.

Amphiphilic Double-Brush Copolymers with a Polyurethane Backbone: A Bespoke Macromolecular Emulsifier for Ionic Liquid-in-Oil Emulsion

The study on ionic liquid (IL)-based emulsions is very interesting due to the "green" quality and potential wide applications of ILs, whereas the emulsifiers for the formation of IL-based emulsions are extremely limited and mainly centered on low molecular weight surfactants. In this work, synthesis of amphiphilic double-brush copolymers (DBCs) and their application as bespoke macromolecular emulsifiers for the formation of IL-containing non-aqueous emulsions are described. DBCs consisted of a polyurethane (PU) backbone and poly(N,N-dimethyl acrylamide) (PDMA) and poly(methyl methacrylate) (PMMA) chains that were grafted simultaneously at the same reactive site along the PU backbone (PU-g-PDMA/PMMA), which were synthesized through the combination of polyaddition and the reversible-deactivation radical polymerization reactions. Highly stable [Bmim][PF₆]-in-benzene emulsions could be gained by adopting PU-g-PDMA/PMMA DBCs as macromolecular emulsifiers at a low content, such as 0.025 wt %. On the basis of the stability and the size of emulsion droplets, PU-g-PDMA/PMMA DBCs exhibited much better emulsifying performances than their analogues, including PU-g-PDMA, PU-g-PMMA, and PDMA-b-PMMA copolymers. Such excellent emulsifying performances of PU-g-PDMA/PMMA DBCs were due to high interfacial activities. PU-g-PDMA/PMMA DBCs exhibited higher capabilities in lowering the interfacial tension of the [Bmim][PF₆]-benzene interface than their analogues. A large energy barrier to desorption of adsorbed PU-g-PDMA/PMMA DBCs from the interface contributed to high stability of the [Bmim][PF₆]-in-benzene emulsion.

How Does the Number of Arms Affect the Properties of Mikto-Arm Stars in a Selective Oligomeric Matrix? Insights from Atomistic Simulations

We present a simulation study of amphiphilic mikto-arm star copolymers in a selective polymer host. By means of atomistic molecular dynamics simulations, we examine the structural and dynamical properties of mikto-arm stars with varying number, n, of poly(ethylene oxide) (PEO) and polystyrene (PS) arms, (PEO) n (PS) n in a 33% wt blend with an oligomeric PEO host (o-PEO). As the number of arms increases, the stars resemble more spherical particles with less separated PEO and PS intramolecular domains. As a result of their internal morphology and associated geometrical constraints, the mikto-arm stars self-assemble either into cylindrical-like objects or a percolated network with increasing n, within the o-PEO matrix. The segmental dynamics is mostly governed by the star architecture and the heterogeneous local environment, formed by the intra- and intermolecular nanosegregation. We discuss the role of each factor and compare the results with previously published studies on mikto-arm stars.

Surfactant-Laden Janus Droplets with Tunable Morphologies and Enhanced Stability for Fabricating Lens-Shaped Polymeric Microparticles

Janus droplets can function as excellent templates for fabricating physically and chemically anisotropic particles. Here, we report new surfactant-laden Janus droplets with curvature controllability and enhanced stability against coalescence, suitable for fabricating shape-anisotropic polymer microparticles. Using a microfluidic flow-focusing device on a glass chip, nanoliter-sized biphasic droplets, comprising an acrylate monomer segment and a silicone-oil (SO) segment containing a surfactant, were produced in a co-flowing aqueous polyvinyl alcohol (PVA) solution. At equilibrium, the droplets formed a Janus geometry based on the minimization of interfacial energy, and each of the two Janus segments were uniform in size with coefficient-of-variation values below 3%. By varying the concentration of the surfactant in the SO phase, the curvature of the interface between the two lobes could be shifted among concave, planar, and convex shapes. In addition, the Janus droplets exhibited significantly improved stability against coalescence compared with previously reported Janus droplets carrying no surfactant that coalesced rapidly. Finally, via off-chip photopolymerization, concave-convex, planar-convex, and biconvex lens-shaped particles were fabricated.

Structurally Anisotropic Janus Particles with Tunable Amphiphilicity via Polymerization of Dynamic Complex Emulsions

A facile one-step approach for the synthesis of physically and chemically anisotropic polymer particles with tunable size, shape, composition, wettability, and functionality is reported. Specifically, dynamically reconfigurable oil-in-water Janus emulsions containing photocurable hydrocarbon or fluorocarbon acrylate monomers as one of the droplet phases are used as structural templates to polymerize them into precision Janus particles with highly uniform anomalous morphologies including (hemi-) spheres, lenses, and bowls. During polymerization, each interface is exposed to a different chemical environment, yielding particles with an intrinsic Janus character that can be amplified via side-selective postfunctionalization. The fabrication method allows to start with various common emulsification techniques, thus generating particles in the range of 200 nm –150 μm, also at a technical scale. The anisotropic shape combined with the asymmetric wettability profile of the produced particles promotes their directed self-assembly into colloidal clusters as well as their directional alignment at fluid interfaces. We foresee the application of such Janus particles in technical emulsions or oil recovery, for the manufacturing of programmed self-assembled architectures, and for the engineering of microstructured interfaces.

Entropic factors and structural motifs of triblock-terpolymer-based patchy nanoparticles

A prevalent strategy for synthesizing patchy nanoparticles is through the self-assembly of triblock terpolymers in selective solvents. Since the thermodynamic and kinetic factors that govern the morphology of the particles produced in this way are not fully understood, this strategy usually demands trial-and-error methodologies. We investigate the fundamental mechanisms that produce multiple types of patchy nanoparticles and identify the conditions needed to program the shapes of the nanoparticles and predict their assembly. Our findings demonstrate that particle morphology can be described in a generic fashion by accounting for the energetic balance between the conformation of the polymer coils and the formation of interfaces. This allows us to forecast the synthesis of patchy nanoparticles for systems with different triblock terpolymers and solvents. Since the shape, size, and distribution of the patches influence the growth of larger microscale structures, we construct a library of elemental nanoparticles, or building blocks, suitable for the study of hierarchically larger self-assembled aggregates and useful for streamlining the design of functional materials. Our results provide new insights into the intriguing mechanisms that determine the morphology of soft nanoscale objects, whether synthetic or naturally occurring.

Design, Synthesis, and Self-Assembly of Janus Bottlebrush Polymers

Janus bottlebrush polymers are a class of special molecular brushes, which have two immiscible side chains on the repeating unit of the backbone. The characteristic architectures of Janus bottlebrush polymers enable unique self-assembly properties and broad applications. Recently, remarkable advances of Janus bottlebrush polymers have been achieved for polymer chemistry and material science. This review summarizes the synthetic strategies of Janus bottlebrush polymers, and highlights the self-assembly applications. Finally, the challenges and opportunities are proposed for the further development.

Soft Polymer Janus Nanoparticles at Liquid-Liquid Interfaces

Soft polymeric Janus nanoparticles (JNPs), made from polystyrene-b-poly(butadiene)-b-poly(methylmethacrylate), PS-PB-PMMA, triblock terpolymers, assemble into a monolayer at the water-oil interface to reduce interfacial tension. The extent to which the polymer chains can deform influences the packing density of the JNPs at the interface. The longer the polymer chains are relative to the core, the softer are the JNPs, resulting in a JNPs assembly with a lower initial lateral packing density. The interfacial activity of JNPs can be further tuned by complexation of the PMMA chains with lithium ions that are introduced into the water phase. This work provides a fundamental understanding of soft JNPs packing at the water-oil interface and provides a strategy to tailor the areal density of soft JNPs at liquid-liquid interface, enabling the design of smart responsive structured-liquid systems.

Multicolor Electrochromic Dye-Doped Liquid Crystal Yolk-Shell Microcapsules

A new system of yolk-shell microcapsules containing two types of dye-doped liquid crystals was prepared via seed emulsion polymerization in which the synthetic process was mimicking plant respiration. The resulting system demonstrated reversible low voltage-driven switching between multispectral colored and transparent states. Moreover, wearable multicolor electrochromic fibers based on calcium alginate were produced via wet spinning to expand the application of yolk-shell dye-doped liquid crystal microcapsules. In addition to its long-term optical stability, the proposed cells and fibers also have satisfactory driving voltage values of color change (4.8 and 9.0 V), which are far lower than the human body safety voltage (12 V). We believe that the prepared microcapsules and fibers are potentially widely applicable in smart windows, electronic paper, and military camouflage clothing.

Distinctive Morphology Modifiers for Polymer Blends: Roles of Asymmetric Janus Nanoparticles during Phase Separation

Janus nanoparticles (JPs), which are anisotropic nanoparticles with multiple constituting parts, have been recognized as superior compatibilizers for polymer-blend-based nanocomposites. However, so far, most studies focused on the effects of symmetric JPs on the phase separation dynamics of polymer blends, while the roles of asymmetric JPs during phase separation remain unclear. In this work, the phase separation dynamics of symmetric blends compatibilized by JPs with various compositions was studied by using dissipative particle dynamics (DPD) simulations. It was found that the blends compatibilized by asymmetric JPs tend to undergo morphological transitions from bicontinuous networks to droplets-in-matrix structures at the late stage of phase separation, which is due to the influence of asymmetric JPs on the energetically favored curvature of the interfaces between polymer domains. Such a mechanism is absent for symmetric JPs and other compatibilizers (e.g., triblock copolymers and homogeneous particles) because they lack the unique combination of chemical asymmetry with the particulate nature like the asymmetric JPs. Moreover, it was observed that the asymmetric JPs can stably localize at the interfaces and act as efficient compatibilizers only when the fraction of the minor constituent part exceeds a critical value. These findings not only shed light upon the roles of asymmetric JPs as compatibilizers but also indicate a promising strategy for designing polymer-blend-based nanocomposites with tailor-made structures.

Kinetics-controlled design principles for two-dimensional open lattices using atom-mimicking patchy particles

The design and discovery of new two-dimensional materials with desired structures and properties are always one of the most fundamental goals in materials science. Here we present an atom-mimicking design concept to achieve direct self-assembly of two-dimensional low-coordinated open lattices using three-dimensional patchy particle systems. Besides honeycomb lattices, a new type of two-dimensional square-octagon lattice is obtained through rational design of the patch configuration of soft three-patch particles. However, unexpectedly the building blocks with thermodynamically favoured patch configuration cannot form square-octagon lattices in our simulations. We further reveal the kinetic mechanisms controlling the formation of the honeycomb and square-octagon lattices. The results indicate that the kinetically favoured intermediates play a critical role in determining the structure of obtained open lattices. This kinetics-controlled design principle provides a particularly effective and extendable framework to construct other novel open lattice structures.

Optically Active Janus Particles Constructed by Chiral Helical Polymers through Emulsion Polymerization Combined with Solvent Evaporation-Induced Phase Separation

Polymer Janus particles (PJPs) have been extensively investigated due to their intriguing features which cannot be achieved in traditional counterparts. Chiral polymer particles also have constituted a unique research area in polymer science. However, how to construct PJPs derived from chiral polymers, especially chiral helical polymers, still remains a significant academic challenge. This contribution reports the first success in preparing optically active PJPs constructed by chiral helical substituted polyacetylene via emulsion polymerization combined with solvent evaporation to induce phase separation. In emulsion polymerization systems, polymethyl methacrylate worked as a template and separated from polyacetylene domains in the course of acetylenic monomers' polymerization and evaporation of the solvent, by which optically active PJPs were formed. The major influencing factors were explored to elucidate their effects on the formation and morphology of PJPs. Mushroom- and bowl-like PJPs were obtained. Scanning electron microscopy (SEM) images ascertain nonspherical morphologies of the obtained PJPs. Circular dichroism and UV-vis absorption spectra demonstrate their optical activity, which originated in the predominantly one-handed helical polyacetylene chains constructing the PJPs. A formation mechanism was then proposed for understanding this unprecedented type of PJPs.

Synthesis of AB n -type colloidal molecules by polymerization-induced particle-assembly (PIPA)

Conventional synthesis of colloidal molecules (CMs) mainly depends on particle-based self-assembly of patchy building blocks. However, direct access to CMs by the self-assembly of isotropic colloidal subunits remains challenging. Here, we report the mass production of AB n -type CMs by polymerization-induced particle-assembly (PIPA), using a linear ABC triblock terpolymer system. Starting from diblock copolymer spheres, the association of spheres takes place in situ during the polymerization of the third block. The third blocks aggregate into attractive domains, which connect spheres into CMs. The stability of CMs is ensured, as long as the conversions are limited to ca. 50%, and the pH is low. The valence of AB n -type CMs (n = 2-6) is determined by the volume ratio of the polymer blocks. By tuning the volume ratio, 78.5% linear AB2-type CMs are yielded. We demonstrate that polymerization-induced particle-assembly is successful for the scalable fabrication of AB n -type CMs (50 g L-1), and can be easily extended to vastly different triblock terpolymers, for a wide range of applications.