A Modular Strategy for Fully Conjugated Donor–Acceptor Block Copolymers

Enhanced Intramolecular Hole Transfer in Block Copolymer Enables >15% and Operational Stable Single-Material-Organic Solar Cells

Recent studies on narrow bandgap all-conjugated block copolymer (BCP) single-material-organic solar cells (SMOSCs) have made unprecedented progress in power conversion efficiency (PCE); however, it still lacks understanding of the structure-property relationship in these highly mixed materials. Herein, the impact of different synthetic protocols (direct synthesis (d-BCP) versus sequential synthesis (s-BCP)) is first investigated on the relevant photovoltaic properties. Targeting the same BCP, namely PBDB-T-b-PYIT, it is found that the change in polymerization reaction leads to quite different optical and transport properties. The d-BCP outputs a record-high PCE of 15.02% for SMOSCs as well as enhanced operation stability under simulated 1-sun illumination, which is significantly higher than that of s-BCP (10.33%) and even close to its bulk heterojunction (BHJ) counterparts. Detailed transient absorption spectroscopy reveals ultrafast dynamics of charge transfer (CT) and exciton dissociation in BCP. In together with morphology characterization, it is revealed that the d-BCP has more phase pure composition, enhanced molecular ordering, and higher intramolecular CT efficiency relative to those of s-BCP. These findings gain insight into both the structure and carrier dynamic of BCP and demonstrate the possibility of achieving high-efficiency and stable SMOSCs.

Recent Developments on Electroactive Organic Electrolytes for Non-Aqueous Redox Flow Batteries: Current Status, Challenges, and Prospects

The ever-increasing threat of climate change and the depletion of fossil fuel resources necessitate the use of solar- and wind-based renewable energy sources. Large-scale energy storage technologies, such as redox flow batteries (RFBs), offer a continuous supply of energy. Depending on the nature of the electrolytes used, RFBs are broadly categorized into aqueous redox flow batteries (ARFBs) and non-aqueous redox flow batteries (NARFBs). ARFBs suffer from various problems, including low conductivity of electrolytes, inferior charge/discharge current densities, high-capacity fading, and lower energy densities. NARFBs offer a wider potential window and range of operating temperatures, faster electron transfer kinetics, and higher energy densities. In this review article, a critical analysis is provided on the design of organic electroactive molecules, their physiochemical/electrochemical properties, and various organic solvents used in NARFBs. Furthermore, various redox-active organic materials, such as metal-based coordination complexes, quinones, radicals, polymers, and miscellaneous electroactive species, explored for NARFBs during 2012-2023 are discussed. Finally, the current challenges and prospects of NARFBs are summarized.

Sequence-controlled alternating block polychalcogenophenes: synthesis, structural characterization, molecular properties, and transistors for bromine detection

Sequence-controlled polychalcogenophenes have attracted much interest in terms of synthesis, structure and function in polymer science. For the first time, we developed a new class of alternating block conjugated copolymers denoted as poly(alt-AB)x-b-(alt-AC)y where both blocks are constituted by an alternating copolymer. 3-Hexylthiophene (S), 3-hexylselenophene (Se) and 3-hexyltellurophene (Te) are used as A, B and C units to assemble three sequence-controlled polychalcogenophenes P(SSe)b(STe), P(SSe)b(SeTe) and P(STe)b(SeTe) which are prepared by adding two different Grignard monomers in sequence to carry out Ni(dppp)Cl2-catalyzed Kumada polymerization. The molecular weight, dispersity, and length of each block (x = y) and main-chain sequence can be synthetically controlled via the catalyst transfer polycondensation mechanism. The polymer structures, i.e. alternating block main chain with high side-chain regioregularity, are unambiguously confirmed by 1H-NMR and 13C-NMR. The optical and electrochemical properties of the polymers can be systematically fine-tuned by the composition and ratio of the chalcogenophenes. From GIWAXS measurements, all the polymers exhibited predominantly edge-on orientations, indicating that the packing behaviors of the alternating block polychalcogenophenes with high regioregularity are inherited from the highly crystalline P3HT. P(SSe)b(STe) exhibited a hole OFET mobility of 1.4 × 10-2 cm2 V-1 s-1, which represents one of the highest values among the tellurophene-containing polychalcogenophenes. The tellurophene units in the polymers can undergo Br2 addition to form the oxidized TeBr2 species which results in dramatically red-shifted absorption due to the alternating arrangement to induce strong charge transfer character. The OFET devices using the tellurophene-containing polychalcogenophenes can be applied for Br2 detection, showing high sensitivity, selectivity and reversibility.

Desirable Uniformity and Reproducibility of Electron Transport in Single-Component Organic Solar Cells

Despite the simplified fabrication process and desirable microstructural stability, the limited charge transport properties of block copolymers and double-cable conjugated polymers hinder the overall performance of single-component photovoltaic devices. Based on the key distinction in the donor (D)-acceptor (A) bonding patterns between single-component and bulk heterojunction (BHJ) devices, rationalizing the difference between the transport mechanisms is crucial to understanding the structure-property correlation. Herein, the barrier formed between the D-A covalent bond that hinders electron transport in a series of single-component photovoltaic devices is investigated. The electron transport in block copolymer-based devices is strongly dependent on the electric field. However, these devices demonstrate exceptional advantages with respect to the charge transport properties, involving high stability to compositional variations, improved film uniformity, and device reproducibility. This work not only illustrates the specific charge transport behavior in block copolymer-based devices but also clarifies the enormous commercial viability of large-area single-component organic solar cells (SCOSCs).

Looking for a Safe Bridge: Synthesis of P3HT-Bridge-TBO Block-Copolymers and Their Performance in Perovskite Solar Cells

Here, we present a synthesis of three novel conjugated block-copolymers (BCP) with general formula P3HT-bridge-TBO, where P3HT is a poly(3-hexyl)thiophene, TBO is a thiophene-benzothiadiazole block, and the bridge is composed of two fluorene units (FF) or two thiophenes (TT) or a mixture (TF). It is demonstrated that the physicochemical properties of the materials with different bridges are similar. Furthermore, P3HT-bridge-TBO materials are investigated in PSCs with classical n-i-p configuration for the first time. PSCs with BCPs reach average efficiencies with a top of 14.4% for P3HT-FF-TBO. At the same time, devices demonstrate spectacular long-term operation stability after 1000 h under constant illumination with minor changes in efficiency, while PSCs with state-of-the-art hole-transport layer demonstrate unstable behavior. This groundbreaking work demonstrates the potential of BCP to ensure the stable operation of perovskite photovoltaics.

Linear Block Copolymer Synthesis

Block copolymers form the basis of the most ubiquitous materials such as thermoplastic elastomers, bridge interphases in polymer blends, and are fundamental for the development of high-performance materials. The driving force to further advance these materials is the accessibility of block copolymers, which have a wide variety in composition, functional group content, and precision of their structure. To advance and broaden the application of block copolymers will depend on the nature of combined segmented blocks, guided through the combination of polymerization techniques to reach a high versatility in block copolymer architecture and function. This review provides the most comprehensive overview of techniques to prepare linear block copolymers and is intended to serve as a guideline on how polymerization techniques can work together to result in desired block combinations. As the review will give an account of the relevant procedures and access areas, the sections will include orthogonal approaches or sequentially combined polymerization techniques, which increases the synthetic options for these materials.

Back-and-Forth Energy Transfer during Electronic Relaxation in a Chlorin-Perylene Dyad

Donor-acceptor dyads represent a practical approach to tuning the photophysical properties of linear conjugated polymers in materials chemistry. Depending on the absorption wavelength, the acceptor and donor roles can be interchanged, and as such, the directionality of the energy transfer can be controlled. Herein, nonadiabatic excited state molecular dynamics simulations have been performed in an arylethylene-linked perylene-chlorin dyad. After an initial photoexcitation at the Soret band of chlorin, we observe an ultrafast sequential electronic relaxation to the lowest excited state. This process is accomplished through an efficient round-trip chlorin-to-perylene-to-chlorin energy transfer. It is characterized by successive intermittent localized and delocalized vibronic dynamics. Nonradiative relaxation takes place mainly through energy transfer events with perylene acting as a "heat sink" through which the nonradiative relaxation is efficiently funneled, and the excess energy is dispersed in a larger space of vibrational degrees of freedom. Thus, our findings suggest the use of donor-acceptor dyads as a useful strategy when one needs to deactivate an electronic excitation.

Synthesis and Self-Assembly of Conjugated Block Copolymers

In the past two decades, conjugated polymers (CPs) have drawn great attention due to their excellent conductivity and charge mobility, rendering them broad applications in organic electronics. Controlling over the morphologies and nanostructures of CPs is very important to improve the performance of CP-based devices, which is still a tremendously difficult task. Conjugated block copolymers (cBCPs), composed of different CP blocks or CP coupled with coiled polymeric blocks, not only maintain the advantages of high conductivity and mobility but also demonstrate features of morphological versatility and tunability. Due to the strong π-π interaction and crystallinity of the conjugated backbones, the self-assembly behaviors of cBCPs are very complicated and largely remain to be explored. In this tutorial review, we first summarize the general synthetic methods for different types of cBCPs. Then, recent studies on the self-assembly behaviors of cBCPs are discussed, with an emphasis on the structural factors that affect the morphologies of cBCPs both in bulk and thin film states. Finally, we briefly provide our outlook on the future research of the self-assembly of cBCPs.

Significantly Improved Morphology and Efficiency of Nonhalogenated Solvent-Processed Solar Cells Derived from a Conjugated Donor-Acceptor Block Copolymer

A highly crystalline conjugated donor (D)-acceptor (A) block copolymer (PBDT2T-b-N2200) that has good solubility in nonhalogenated solvents is successfully synthesized. PBDT2T-b-N2200 shows a broad complementary absorption behavior owing to a wide-band gap donor (PBDT2T) present as a D-block and a narrow-band gap acceptor (N2200) present as an A-block. Polymer solar cells (PSCs) with conjugated block copolymer (CBCP) are fabricated using a toluene solution and PSC created with an annealed film showing the highest power conversion efficiency of 6.43%, which is 2.4 times higher than that made with an annealed blend film of PBDT2T and N2200. Compared to the blend film, the PBDT2T-b-N2200 film exhibits a highly improved surface and internal morphology, as well as a faster photoluminescence decay lifetime, indicating a more efficient photoinduced electron transfer. In addition, the PBDT2T-b-N2200 film shows high crystallinity through an effective self-assembly of each block during thermal annealing and a predominant face-on chain orientation favorable to a vertical-type PSC. Moreover, the CBCP-based PSCs exhibit an excellent shelf-life time of over 1020 h owing to their morphological stability. From these results, a D-A block copolymer system is one of the efficient strategies to improve miscibility and morphological stability in all polymer blend systems.

Improved efficiency of single-component active layer photovoltaics by optimizing conjugated diblock copolymers

Using an A–B type monomer instead of an AA + BB type monomer to synthesise diblock copolymers, the PCE of a single-component photovoltaic device reached 1.22%.

Fully Conjugated Donor-Acceptor Block Copolymers for Organic Photovoltaics via Heck-Mizoroki Coupling

The development of facile routes to prepare fully conjugated block copolymers (BCPs) from diverse monomers is an important goal for advancing robust bulk-heterojunction (BHJ) organic photovoltaics (OPVs). Herein we introduce a synthetic strategy for step-growth BCPs employing 1,2-bis(trialkylstannyl)ethene as one monomer, which, in addition to offering improved backbone planarity, directly yields a vinylene-terminated macromonomer suitable for Heck-Mizoroki coupling. The benefits of our strategy, which facilitates the preparation of functionalized macromonomers suitable for BCP synthesis, are demonstrated with a representative BCP based on a diketopyrrolopyrrole (DPP) copolymer coded pBDTTDPP as the donor block and a perylenediimide (PDI) copolymer coded as pPDIV as the acceptor block. Feed ratio optimization affords control over the macromonomer chain-end functionalities and allows for the selective formation of a tri-BCP consisting of pPDIV-b-pBDTTDPP-b-pPDIV, which is employed in a single-component BHJ OPV. Devices achieved a power conversion efficiency of 1.51% after thermal stress at 150 °C compared to 0.02% for a control device consisting of a comparable blend of pBDTTDPP and pPDIV. The difference in performance is ascribed to the morphological stability of the BHJ when using the BCP.

Block Junction-Functionalized All-Conjugated Donor-Acceptor Block Copolymers

Junction-functionalized donor-acceptor (D-A) block copolymers (BCPs) enable spatial and electronic control over interfacial charge dynamics in excitonic devices such as solar cells. Here, we present the design, synthesis, morphology, and electronic characterization of block junction-functionalized, all-conjugated, all-crystalline D-A BCPs. Poly(3-hexylthiophene) (P3HT), a single thienylated diketopyrrolopyrrole (Th _xDPPTh _x, x = 1 or 2) unit, and poly{[ N, N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]- alt-5,5'-(2,2'-bithiophene)} (PNDIT2) are used as donor, interfacial unit, and acceptor, respectively. Almost all C-C coupling steps are accomplished by virtue of C-H activation. Synthesis of the macroreagent H-P3HT-Th _xDPPTh _x, with x determining its C-H reactivity, is key to the synthesis of various BCPs of type H-P3HT-Th _xDPPTh _x- block-PNDIT2. Morphology is determined from a combination of calorimetry, transmission electron microscopy (TEM), and thin-film scattering. Block copolymer crystallinity of P3HT and PNDIT2 is reduced, indicating frustrated crystallization. A long period l_p is invisible from TEM, but shows up in resonant soft X-ray scattering experiments at a length scale of l_p ∼ 60 nm. Photoluminescence of H-P3HT-Th _xDPPTh _x indicates efficient transfer of the excitation energy to the DPP chain end, but is quenched in BCP films. Transient absorption and pump-push photocurrent spectroscopies reveal geminate recombination (GR) as the main loss channel in as-prepared BCP films independent of junction functionalization. Melt annealing increases GR as a result of the low degree of crystallinity and poorly defined interfaces and additionally changes backbone orientation of PNDIT2 from face-on to edge-on. These morphological effects dominate solar cell performance and cause an insensitivity to the presence of the block junction.

Rapid solvo-microwave annealing for optimizing ordered nanostructures and crystallization of regioregular polythiophene-based block copolymers

Solvo-microwave annealing is an effective method for producing thin films of polythiophene-based block copolymers with ordered structures and high crystallinity in a very short processing time (∼3 min).

Synthesis and crystallization behavior of regioregular-block-regiorandom poly(3-hexylthiophene) copolymers

Regioregular–regiorandom poly(3-hexylthiophene) copolymers, synthesized by chain-transfer polycondensation, show strong crystallinity due to their one-sided distribution of regiodefects.

Realizing lamellar nanophase separation in a double-cable conjugated polymer via a solvent annealing process

A double-cable conjugated polymer based on crystalline polythiophene backbone and perylene bisimide side units was developed to realize ordered lamellar structures via solvent annealing process.

Synthesis and Characterization of Fully Conjugated Ladder Naphthalene Bisimide Copolymers

Fully conjugated ladder copolymers have attracted considerable attention due to their unique fused-ring structure and optoelectronic properties. In this study, two fully conjugated ladder naphthalene diimide (NDI) copolymers, P(NDI-CZL) and P(NDI-TTL) with imine-bridged structures are presented in high yields. Both of the two copolymers have good solubility and high thermal stability. The corresponding compounds with the same structure as the copolymers were synthesized as model system. The yields for each step of the synthesis of the model compounds are higher than 95%. These results suggest that P(NDI-CZL) and P(NDI-TTL) can be synthesized successfully with fewer structural defects. The structures and optoelectronic properties of compounds and copolymers are investigated by NMR, fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-vis), and cyclic voltammetry (CV). Both in solution and as a thin film, the two copolymers show two UV-vis absorption bands (around 300⁻400 nm and 400⁻750 nm) and a very weak fluorescence. The collective results suggest that the two fully conjugated ladder copolymers can be used as potential acceptor materials.

Advances toward the effective use of block copolymers as organic photovoltaic active layers

Donor/acceptor block copolymers for organic photovoltaic active layers are discussed from first principles through the modern state-of-the-art and future perspectives.

Semiconducting alternating multi-block copolymers via a di-functionalized macromonomer approach

A route to fully-conjugated semiconducting block copolymers is presented and the prototype exhibits nanoscopic phase domain separation and good mobility.

Synthetic approaches towards structurally-defined electrochemically and (photo)redox-active polymer architectures

This review details synthetic strategies leading to structurally-defined electrochemically and (photo)redox-active polymer architectures,e.g.block, graft and end functionalized (co)polymers.

Comparing blends and blocks: Synthesis of partially fluorinated diblock polythiophene copolymers to investigate the thermal stability of optical and morphological properties

The microstructure of the active blend layer has been shown to be a critically important factor in the performance of organic solar devices. Block copolymers provide a potentially interesting avenue for controlling this active layer microstructure in solar cell blends. Here we explore the impact of backbone fluorination in block copolymers of poly(3-octyl-4-fluorothiophene)s and poly(3-octylthiophene) (F-P3OT-b-P3OT). Two block co-polymers with varying block lengths were prepared via sequential monomer addition under Kumada catalyst transfer polymerisation (KCTP) conditions. We compare the behavior of the block copolymer to that of the corresponding homopolymer blends. In both types of system, we find the fluorinated segments tend to dominate the UV-visible absorption and molecular vibrational spectral features, as well as the thermal behavior. In the block copolymer case, non-fluorinated segments appear to slightly frustrate the aggregation of the more fluorinated block. However, in situ temperature dependent Raman spectroscopy shows that the intramolecular order is more thermally stable in the block copolymer than in the corresponding blend, suggesting that such materials may be interesting for enhanced thermal stability of organic photovoltaic active layers based on similar systems.

High-resolution noncontact AFM and Kelvin probe force microscopy investigations of self-assembled photovoltaic donor-acceptor dyads

Self-assembled donor-acceptor dyads are used as model nanostructured heterojunctions for local investigations by noncontact atomic force microscopy (nc-AFM) and Kelvin probe force microscopy (KPFM). With the aim to probe the photo-induced charge carrier generation, thin films deposited on transparent indium tin oxide substrates are investigated in dark conditions and upon illumination. The topographic and contact potential difference (CPD) images taken under dark conditions are analysed in view of the results of complementary transmission electron microscopy (TEM) experiments. After in situ annealing, it is shown that the dyads with longer donor blocks essentially lead to standing acceptor-donor lamellae, where the acceptor and donor groups are π-stacked in an edge-on configuration. The existence of strong CPD and surface photo-voltage (SPV) contrasts shows that structural variations occur within the bulk of the edge-on stacks. SPV images with a very high lateral resolution are achieved, which allows for the resolution of local photo-charging contrasts at the scale of single edge-on lamella. This work paves the way for local investigations of the optoelectronic properties of donor-acceptor supramolecular architectures down to the elementary building block level.

pH-Responsive non-ionic diblock copolymers: protonation of a morpholine end-group induces an order–order transition

Protonation of a terminal morpholine group on PGMA₅₀-PHPMA₁₄₀ diblock copolymer nanoparticles induces a reversible worm-to-sphere order-order transition.

Fully conjugated block copolymers for single-component solar cells: synthesis, purification, and characterization

All-polymer solar cells using the preparative GPC separated block copolymer P3HT-b-PBIT2 as a simple active layer show a power conversion efficiency of 1.0%.

Morphology, Crystal Structure and Charge Transport in Donor-Acceptor Block Copolymer Thin Films

We studied structure and charge transport properties of thin films of donor-acceptor block copolymers, poly(3-hexylthiophene-block-perylene bisimide acrylate), using a combination of X-ray scattering, AFM and vertical charge transport measurements in diode devices. Block copolymer self-assembly and crystallization of the individual components are interrelated and different structural states of the films could be prepared by varying preparation conditions and thermal history. Generally the well-defined microphase structures found previously in bulk could also be prepared in thin films, in addition alignment induced by interfacial interactions was observed. Microphase separated block copolymers sustain ambipolar charge transport, but the exact values of electron and hole mobilities depend strongly on orientation and connectivity of the microdomains as well as the molecular order within the domains.