Lyotropic chiral nematic liquid crystalline aliphatic conjugated polymers based on disubstituted polyacetylene derivatives that exhibit high dissymmetry factors in circularly polarized luminescence

Optically active poly(diphenylacetylene)s showing solvent-dependent helix inversion accompanied by modulation of helix inversion barriers

Symmetrically substituted poly(diphenylacetylene)s bearing optically active 2-octyloxycarbonyl groups at the para-positions of the pendant phenyl rings not only show a unique solvent-dependent helix inversion to afford diastereomeric right- and left-handed helical polymers but also significant unprecedented solvent-dependent changes in the helix inversion barrier of the polymer backbone resulting in switching between static or dynamic behavior of the helical polymers at approximately room temperature depending on the solvents used.

Amplified Circularly Polarized Luminescence Behavior in Chiral Co-assembled Liquid Crystal Polymer Films via the Strategic Manipulation of Chiral Inducers

One of the most important factors for the future application of circularly polarized luminescence (CPL) materials is their high dissymmetry factors (gem), and more and more studies are working tirelessly to focus on increasing the gem value. Herein, we chose an achiral liquid crystal polymer (LC-P) and two chiral binaphthyl-based inducers (R/S-3 and R/S-6) with different substitution positions (3,3' positions for R/S-3 and 6,6' positions for R/S-6) to construct chiral co-assemblies and explored their induced amplification CPL behaviors. Interestingly, after the thermal annealing treatment, this kind of chiral co-assembly (R/S-3)0.05-(LC-P)0.95 can emit a superior CPL signal (|gem| = 0.31 and λem = 424 nm), which achieves about 13-fold signal amplification in the spin-coated film, compared to (R/S-6)0.1-(LC-P)0.9 (|gem| = 0.023 and λem = 424 nm). This is because (R/S-3)0.05-(LC-P)0.95 could further co-assemble to form a more ordered arrangement LC state and generate regular helix nanofibers than that of (R/S-6)0.1-(LC-P)0.9. This work provides an efficient method for synthesizing high-quality CPL-active materials through the strategic manipulation of the structure of chiral binaphthyl-based inducers in chiral co-assembled LCP systems.

Light-Driven Sign Inversion of Circularly Polarized Luminescence Enabled by Dichroism Modulation in Cholesteric Liquid Crystals

Stimuli-responsive circularly polarized luminescence (CPL) materials show great promise in applying information encryption and anticounterfeiting. Herein, light-driven CPL sign inversion is achieved by combining a photoresponsive achiral negative dichroic dye (KG) and a static achiral positive dichroic dye (NR) as dopants at the 0.5:0.5 weight ratio into the cholesteric liquid crystal (CLC) host. The side chains of KG undergo trans/cis isomerization after 365 nm UV light irradiation, leading to the dichroism (SF) decrease. The |glum| value of CLC doping with KG (CLC-KG) weakens from 0.67 to 0.28 in response to the order degree change. Taking advantage of its unique CPL response property, the light-driven CPL sign inversion is achieved (from -0.20/0.14 to 0.02/-0.04) by incorporating NR (0.5:0.5) into the CLC-KG with helical superstructure static. Based on the synergistic use of circular polarization and responsiveness state as cryptographic primitives, the multidimensional information encryption CLC system can be realized.

Liquid-crystalline circularly polarised TADF emitters for high-efficiency, solution-processable organic light-emitting diodes

Achieving a high emission efficiency and a large luminescence asymmetry factor (glum) in a single molecule exhibiting circularly polarised thermally activated delayed fluorescence (CP-TADF) remains a formidable challenge. In this work, a proof-of-concept, liquid-crystalline CP-TADF molecule is proposed to realise high glum by taking advantage of the order inherent in liquid crystals. Employing a chiral dinaphthol-based CP-TADF molecule as the emissive unit, a pair of liquid-crystalline CP-TADF molecules (R/S-4) is synthesised via the introduction of six mesogenic moieties. The enantiomers show intense emission at about 520 nm which has clear TADF and liquid-crystalline characteristics. Both enantiomers display symmetrical electronic circular dichroism (CD) and circular polarisation luminescence (CPL) signals as thin films. Impressively, relatively large glum values of 0.11 are realised for the films. Solution-processed devices were fabricated using R/S-4 as the dopants, with the TADF molecule CzAcSF as the sensitiser. The OLEDs so prepared show a very high maximum external quantum efficiency of 21.2%, revealing a novel strategy for realising large glum values in CP-TADF.

Stimuli-responsive synthetic helical polymers

Synthetic dynamic helical polymers (supramolecular and covalent) and foldamers share the helix as a structural motif. Although the materials are different, these systems also share many structural properties, such as helix induction or conformational communication mechanisms. The introduction of stimuli responsive building blocks or monomer repeating units in these materials triggers conformational or structural changes, due to the presence/absence of the external stimulus, which are transmitted to the helix resulting in different effects, such as assymetry amplification, helix inversion or even changes in the helical scaffold (elongation, J/H helical aggregates). In this review, we show through selected examples how different stimuli (e.g., temperature, solvents, cations, anions, redox, chiral additives, pH or light) can alter the helical structures of dynamic helical polymers (covalent and supramolecular) and foldamers acting on the conformational composition or molecular structure of their components, which is also transmitted to the macromolecular helical structure.

Controllable Circularly Polarized Luminescence with High Dissymmetry Factor via Co-Assembly of Achiral Dyes in Liquid Crystal Polymer Films

Circularly polarized luminescence (CPL) materials are highly demanded due to their great potential in optoelectronic and chiroptical elements. However, the preparation of CPL films with high luminescence dissymmetry factors (glum ) remains a formidable task, which impedes their practical application in film-based devices. Herein, a facile strategy to prepare solid CPL film with a high glum through exogenous chiral induction and amplification of liquid crystal polymers is proposed. Amplification and reversion of the CPL appear when the films are annealed at the chiral nematic liquid crystalline temperature and the maximal glum up to 0.30 due to the enhancement of selective reflection. Thermal annealing treatment at different liquid crystalline states facilitates the formation of the chiral liquid phase and adjusts the circularly polarized emission. This work not only provides a straightforward and versatile platform to construct organic films capable of exhibiting strong circularly polarized emission but also is helpful in understanding the exact mechanism for the liquid crystal enhancement of CPL performance.

Chiroptical Switching of Electrochromic Polymer Thin Films

The interaction between light and chiroptical polymers plays a crucial role in chiroptics, spintronics, and chiral-spin selectivity. Despite considerable successes in creating dissymmetric polymer films, the elucidation of chiroptical activities under electrochemical switching remains unexplored. Here homogeneous chiral electrochromics is reported using chiral assembly of conjugated polymers through a transient solidification process with molecular chiral templates. In their neutral state, the chiral electrochromic polymers directly produce a remarkably dissymmetric polarization-dependent transmittance. The circular dichroism (CD) and dissymmetric transmission can be tuned by adjusting the doping level of the electrochemically active polymer films. Under high levels of oxidation, the chiroptical activities are reversed with strong bleaching in the visible, leading to formation of monosignate CD spectra over the infrared region. The matching between circular polarization handedness and chirality of chiroptical polymers makes a distinct impact on optical contrast and color switching dynamics due to the flipped chiroptical activities through polymer redox reactions. The differential circularly polarized transmission in the chiral see-through display can make a well-resolved color change in human eyes, demonstrating proof-of-concept devices for 3D imaging and information encryption. This work serves as a foundation to develop advanced on-chip fabrication of circular polarization-multiplexed display in flexible and highly integrated platforms.

Achiral Dichroic Dyes-mediated Circularly Polarized Emission Regulated by Orientational Order Parameter through Cholesteric Liquid Crystals

It is noteworthy that cholesteric liquid crystal (CLC) platforms have been witnessed in high-performance circularly polarized luminescence (CPL) behaviors through the highly organized chiral co-assembled arrangement of achiral dyes. However, most CPL-active design strategies are closely relative to the helix co-assembly structure of CLC rather than achiral dyes. Herein, we developed an intriguing regulation strategy for CPL-active CLC materials. They were regulated using the orientational order parameter (SF ) of achiral dichroic dyes as an incisive probe for the order arrangement degree of achiral dyes in CLC media. The I-shaped phenothiazine derivative PHECN dye (SF =0.30) emitted a strong CPL signal (|glum |=0.47). In contrast, the T-shaped derivative (PHEBen) dye (SF =0.09) showed a weak circular polarization level (|glum |=0.07) at similar CLC textures. Most interestingly, this kind of dichroic PHECN dye with a higher SF could greatly improve the contrast ratio of CPL (Δglum =0.47) and emission intensity (ΔFL=46.0 %) at direct-current electric field compared with the T-shaped PHEBen (Δglum =0.07 and ΔFL=1.0 %) in CLC. This work demonstrates that an induced CPL emission can be mediated using achiral dichroic dye, which will open a new avenue for developing excellent CPL-active display materials.

Enhanced circularly polarized luminescence dissymmetry of [Ru(bpy)3]2+ complexes in a 3D chiral framework: a study of transparent thin films

Circularly polarized luminescence (CPL) plays an important role in the development of advanced optical devices. However, the design of CPL-active materials with a decent dissymmetry factor is still challenging. Here, we report CPL-active transparent thin films made from optically active ruthenium complexes [Ru(bpy)3]2+ embedded in chiral inorganic frameworks. Due to the unique chiral-in-chiral combination, the obtained [Ru(bpy)3][Zn2(C2O4)3] displays CPL activity with a dissymmetry factor of 5 × 10-3. The CPL measurements show that the luminescence dissymmetry factor can be effectively enhanced by one order of magnitude when an optically active [Ru(bpy)3]2+ complex is incorporated into a chiral inorganic framework compared to its solution form. This study not only emphasizes the potential of constructing CPL-active thin films with coordination polymers but also points out the importance of introducing extra chiral environment to improve the CPL effect.

Mn(iii)-mediated C-P bond activation of diphosphines: toward a highly emissive phosphahelicene cation scaffold and modulated circularly polarized luminescence

Transition metal mediated C-X (X = H, halogen) bond activation provides an impressive protocol for building polyaromatic hydrocarbons (PAHs) in C-C bond coupling and annulation; however, mimicking both the reaction model and Lewis acid mediator simultaneously in a hetero-PAH system for selective C-P bond cleavage faces unsolved challenges. At present, developing the C-P bond activation protocol of the phosphonic backbone using noble-metal complexes is a predominant passway for the construction of phosphine catalysts and P-center redox-dependent photoelectric semiconductors, but non-noble metal triggered methods are still elusive. Herein, we report Mn(iii)-mediated C-P bond activation and intramolecular cyclization of diphosphines by a redox-directed radical phosphonium process, generating phosphahelicene cations or phosphoniums with nice regioselectivity and substrate universality under mild conditions. Experiments and theoretical calculations revealed the existence of the unusual radical mechanism and electron-deficient character of novel phosphahelicenes. These rigid quaternary bonding skeletons facilitated versatile fluorescence with good tunability and excellent efficiency. Moreover, the enantiomerically enriched crystals of phosphahelicenes emitted intense circularly polarized luminescence (CPL). Notably, the modulated CPL of racemic phosphahelicenes was induced by chiral transmission in the cholesteric mesophase, showing ultrahigh asymmetry factors of CPL (+0.51, -0.48). Our findings provide a new approach for the design of emissive phosphahelicenes towards chiral emitters and synthesized precursors.

Facile Synthesis of Linear and Cyclic Poly(diphenylacetylene)s by Molybdenum and Tungsten Catalysis

Improved methods for the synthesis of linear and cyclic poly(diphenylacetylene)s by polymerization of the corresponding diphenylacetylenes using MoCl5 - and WCl4 -based catalytic systems have been developed. MoCl5 induces migratory insertion polymerization of diphenylacetylenes in the presence of arylation reagents such as Ph4 Sn and ArSnn Bu3 to produce cis-stereoregular linear poly(diphenylacetyelene)s with high molecular weights (number-average molar mass (Mn )=30,000-3,200,000) in good yields (up to 98 %). On the other hand, WCl4 induces ring expansion polymerization of diphenylacetylenes in the presence of Ph4 Sn or reducing reagents to produce cis-stereoregular cyclic poly(diphenylacetylene)s with high molecular weights (Mn =20,000-250,000) in moderate to good yields (up to 90 %). Both catalytic systems are applicable to the polymerization of various diphenylacetylenes having polar functional groups such as esters that are not efficiently polymerized by conventional methods using WCl6 -Ph4 Sn and TaCl5 -n Bu4 Sn systems.

Liquid Crystals Doped with Chiral Fluorescent Polymer: Multi-Color Circularly Polarized Fluorescence and Room-Temperature Phosphorescence with High Dissymmetry Factor and Anti-Counterfeiting Application

Chiral nematic liquid crystals (N*-LCs) can tremendously amplify circularly polarized luminescence (CPL) signals. Doped emissive N*-LCs have been substantially explored. However, their CPL performances still need to be improved, mainly due to the unsatisfying helical twisting power (HTP) of commonly used chiral fluorescent dopants. Chiral fluorescent helical polymers (CFHPs) have outstanding optical activity and CPL performance. The present contribution reports the first success in constructing emissive N*-LCs by doping CFHP into nematic liquid crystals (5CB, N-LCs). The helical assembly structures of N*-LCs effectively amplify the CPL signals of the CFHP. Owing to the high HTP of CFHP, the selective reflection band of N*-LC can be adjusted to fully cover its emission band. A nearly pure CPL with a dissymmetry factor (glum ) up to -1.87 is realized at 9 wt% doping concentration. Taking advantage of the selective reflection mechanism, multi-color CPL-active N*-LCs with high glum are fabricated via further adding achiral fluorophores. Also noticeably, circularly polarized room-temperature phosphorescence with glum up to -1.57 is achieved. Anti-counterfeiting application is demonstrated by exploiting multi-mode optical characteristics of the created N*-LCs. The established strategy for constructing emissive N*-LCs provides a platform for future exploring of CPL-active N*-LCs.

Induced CPL-Active Materials Based on Chiral Supramolecular Co-Assemblies

Circularly polarized luminescence (CPL) has attracted much interest due to its potential applications on chiral photonic techniques and optoelectronic materials science. As known, dissymmetry factor (g_em ) of CPL is one essential factor for evaluating the features of CPL-active materials. Much attention has focused on how to increase the g_em value, which is one of the most important issues for CPL practical applications. Recently, more and more works have demonstrated that chiral supramolecular could provide the significant strategy to improve the g_em value through the orderly helical superstructure of chiral building blocks. Normally, this kind of chiral supramolecular assembly process can be accompanied by chirality transfer and induction mechanism, which can promote the amplification effect on the induced CPL of achiral dyes. In this review, we fully summarized recent advances on the induced CPL-active materials of chiral supramolecular co-assemblies, their applications in circularly polarized organic light-emitting diodes (CP-OLEDs) and current challenges.

2D Hexagonal Assemblies of Amphiphilic Double-Helical Poly(phenylacetylene) Homopolymers with Enhanced Circularly Polarized Luminescence and Chiral Self-Sorting

Two-dimensional (2D) chiral materials have been attracting immense attentions owing to their unique properties. Herein, we successfully developed a unique assembly strategy of amphiphilic homopolymers to construct stable free-standing 2D chiral nanosheets in solution. The amphiphilic poly(phenylacetylene) (PPA) homopolymers bearing the hydrophobic and hydrophilic dendritic side chains adopt a DNA-like double-helical conformation. The regular hexagonal nanosheets were formed in THF/EtOH through nucleation and epitaxial growth. The sizes of the nanosheets can be modulated from nanometers to submillimeters upon varying the ratio of binary solvents, while the thickness is linearly correlated with the molecular weights. The 2D architecture can significantly enhance the CPL of polymers with a high dissymmetry factor ≈0.1. Driven by a discrimination of helical conformation, the PPAs can self-sort into homochiral 2D nanosheets, as directly visualized by using fluorescent microscopy.

Vortex Flow-controlled Circularly Polarized Luminescence of Achiral Pt(II) Complex Aggregates Assembled at the Air-Water Interface

Circularly polarized luminescence (CPL) has been researched for various applications by control of characteristics such as chirality and magnitude. Supramolecular chirality has been prepared by vortex motion as a mechanical stimulus; however, CPL has yet to be controlled precisely and reproducibly. In this work, the first precise control of CPL under vortex flow conditions at an air-water interface is reported. The supramolecular chirality of aggregates consisting of an achiral trans-bis(salicylaldiminato)Pt(II) complex bearing hexadecyl chains is induced and controlled with vortex flow at the air-water interface, whereas the complex naturally forms an achiral amorphous solid with non-chiroptical properties under non-vortex conditions. The CPL direction and magnitude (g_lum value) of the Pt(II) complex aggregates can be adjusted precisely according to the vortex conditions, including the rotatory direction and flow rate. Vortex-flow-induced emission enhancement is also observed upon an increase in the rate of the vortex flow.

Switchable Circularly Polarized Signals with High Asymmetric Factor Triggered by Dual Photonic Bandgap Structure

Currently, the smart photonic materials that can switch circularly polarized signals in real-time have attracted extensive attention due to numerous potential applications in information storage and photonics displays. However, the dynamically reversible switching of circularly polarized signals requires precise structural reconfiguration, which is rarely achieved in traditional biomaterials. Herein, a dual photonic bandgap (PBG) structure is constructed based on the optical propagation principle of cellulose-based photonic crystals, enabling the flexible switching of the intensity, wavelength, and direction of circularly polarized luminescence (CPL). By adjusting the fluorescence intensity and the matching degree of chiral structure, the asymmetric factor value of dual PBG structure is up to -1.47, far exceeding other cellulose-based materials. Importantly, it is demonstrated that dual CPL emission can be efficiently induced by two different PBGs, opening a new approach for on-demand switching of single and dual CPL emission. In addition, the dual PBG structure exhibits dual circularly polarized reflected signals under the circular polarizer, which perfectly embodies the applicability of multiple encryptions in QR codes. This work provides new insights into the real-time manipulation of circularly polarized signals by chiral photonic materials.

Programming and Dynamic Control of the Circular Polarization of Luminescence from an Achiral Fluorescent Dye in a Liquid Crystal Host by Molecular Motors

Circular polarized light is utilized in communication and display technologies and a major challenge is to develop systems that can be switched between left and right circular polarized luminescence with high degrees of polarization and enable multiple addressable stable states. Luminescent dyes in Liquid Crystal (LC) cholesteric phases are attractive systems to generate, amplify and modulate circularly polarized luminescence (CPL). In the present study, we employ light-driven molecular motors as photo-controlled chiral dopants in LCs to switch the handedness of the LC and the circular polarization of luminescence from an achiral dye embedded in the mesogenic material. Tuning of the color of the CPL and the retention time of the photoprogrammed helicity is demonstrated making use of a variety of motors and dyes. The flexibility offered by the design based on inherently chiral unidirectional rotary motors provides full control over CPL non-invasively by light, opening possibilities for pixilated displays with externally addressable polarization.

Turn-On Mode Circularly Polarized Luminescence in Self-Organized Cholesteric Superstructure for Active Photonic Applications

Developing circularly polarized luminescence (CPL)-active materials with a large luminescence dissymmetry factor (g_lum) or stimulus responses has evoked a lot of interest in the past few years; however, the light-controllable "on/off" CPL still remains a challenge. Here, a novel diarylethene-based chiral fluorescent photoswitch featuring "turn-on" CPL characteristic is developed, designated as (S,S)-switch 6, which can undergo reversible photocyclization/cycloreversion upon irradiation with UV and visible light. (S,S)-Switch 6 shows completely reversible "off-on-off"-responsive CPL behavior in solution. By doping (S,S)-switch 6 into nematic liquid crystals (LCs), the consequent luminescent cholesteric LCs (CLCs) exhibit a larger g_lum value enhanced 2 orders of magnitude when irradiated with UV light, which can be attributed to the highly ordered helical arrangement of CLCs. The potentials of this turn-on type CPL material for anticounterfeiting and information encryption are illustrated. Furthermore, the visualization of circularly polarized (CP) fluorescent patterns can be successfully achieved by constructing the double-layer CPL system consisting of a CP luminescent layer and a polymer cholesteric reflective layer. The proposed concept establishes a light-controlled off-on-off CPL platform that is of tremendous potential for applications in multi-informational data storage and encryption devices.

Circularly Polarized Luminescent Chiral Photonic Films Based on the Coassembly of Cellulose Nanocrystals and Gold Nanoclusters

In this work, we studied the formation and properties of composite films coassembled by cellulose nanocrystals (CNCs) and bovine serum albumin-stabilized gold nanoclusters (BSA-AuNCs). The influences of the BSA-AuNC concentration on the structure and optical properties of CNC-based composite films were further studied. It was found that the composite film retained the chiral nematic structure and optical activity. The self-assembled CNC and BSA-AuNC helical superstructures can produce strong, left-handed, circularly polarized luminescence with dissymmetry factors up to 0.287. Meanwhile, the third component, polyethylene glycol, was introduced without affecting the structural color and fluorescence characteristics of the composite film to enhance the flexibility of the film. The simplicity of the film preparation, the abundance of CNCs, and the flexibility and stability of the composite films pave the way for the production of functional materials with integrated functions.

Inverted Circularly Polarized Luminescence Behavior Induced by Helical Nanofibers through Chiral Co-Assembly from Achiral Liquid Crystal Polymers and Chiral Inducers

Chiral supramolecular assembly can provide a powerful strategy for developing circularly polarized luminescence (CPL)-active materials by forming helices or superhelices into single or multiple components. Herein, we chose three achiral liquid crystal polymers (LC-P1/P2/P3) and chiral binaphthyl-based inducers (R/S-M) with anchored dihedral angles to construct chiral co-assemblies and explore the induced CPL behavior from pyrenyl (Py) emitters in achiral LC polymers through the regulation of helical nanofibers during the supramolecular co-assembly process. Most interestingly, chiral co-assembly (R/S-M)_0.1-(P3)_0.9 emitted an inverted blue-colored CPL signal during thermal annealing treatment at the glass transition temperature due to the flexible main chain of the LC polymer (LC-P3). The strongest blue-colored CPL emission for the (R/S-M)_0.1-(P3)_0.9 spin-coated film (λ_em = 455 nm, |g_em| = 6.47 × 10^-2, Φ_F = 48.5%) could be detected by using thermal annealing treatment at 105 °C.

Amplifying inorganic chirality using liquid crystals

Chiral inorganic nanostructures have drawn extensive attention thanks to their unique physical properties as well as multidisciplinary applications. Amplifying inorganic chirality using liquid crystals (LCs) is an efficient way to enhance the parented inorganic asymmetry owing to chirality transfer. Herein, the universal synthetic methods and structural characterizations of chiral inorganic-doped LC hybrids are introduced. Additionally, the current progress and status of recent experiment and theory research about chiral interactions between inorganic nanomaterials (e.g. metal, semiconductor, perovskite, and magnetic oxide) and LCs are summarized in this review. We further present representative applications of these new hybrids in the area of encryption, sensing, optics, etc. Finally, we provide perspectives on this field in terms of material variety, new synthesis, and future practice. It is envisaged that LCs will act as a pivotal part in the amplification of inorganic chirality with versatile applications.

Strong CPL-active liquid crystal materials induced by intermolecular hydrogen-bonding interaction and a chirality induction mechanism

A novel co-assembly material can emit strong CPL signals (λ_em = 485 nm, g_lum = +0.076/-0.064) from an achiral AIE-active β-cyanostilbene (CYS) liquid crystal dye through intermolecular hydrogen bond (HB) interaction and chirality induction after a rapid cooling quench treatment.

Solvent-dependent helix inversion in optically active poly(diphenylacetylene)s and their chiral recognition abilities as chiral stationary phases for high-performance liquid chromatography

We report the first example of solvent-dependent helix inversion in poly(diphenylacetylene) (PDPA) derivatives. Asymmetrically substituted PDPAs bearing optically active substituents linked through amide bonds formed preferred-handed helical conformations because of the optically active substituents in the pendants, whose helix-senses were inverted upon thermal annealing in polar solvents such as N,N-dimethylformamide and dimethylsulfoxide and in nonpolar solvents such as tetrachloroethane. Unlike the solvent-dependent helix inversion reported for other dynamic helical polymers, the macromolecular helicity induced in the polymer backbone of these PDPAs upon thermal annealing was stably maintained at room temperature, independent of the solvent polarity. These diastereomeric PDPAs with opposite helix-senses generated almost mirror-imaged left- and right-handed circularly polarized light in the same solvent at room temperature. Taking advantage of this unique solvent-dependent helix inversion property, the diastereomeric PDPAs with opposite helix-senses were coated on macroporous silica gel and applied to chiral stationary phases for high-performance liquid chromatography. Despite having the same optically active substituents on the pendant phenyl rings, they showed completely different chiral recognition abilities toward many racemates depending on the helix-sense of the polymer backbone, and the elution order of the enantiomers was reversed for some racemates. The combination of the helix-sense of the polymer backbone and the chirality of the pendants, which afforded a higher chiral recognition ability, differed depending on the racemates.

Europium(III) Complex-Functionalized SiO2@mTiO2 Nanospheres for Al3+-Modulated Multicolor Emission

A europium(III) hybrid material Eu(tta)₃bpdc-SiO₂@mTiO₂ (Htta = 2-thenoyltrifluoroacetone, H₂bpdc = 2,2′-bipyridine-3,3′-dicarboxylic acid) was successfully designed and synthesized by the covalent grafting complex Eu(tta)₃bpdc to SiO₂@mTiO₂ core–shell nanosphere. The FT-IR, PXRD, XPS, TEM, HRTEM, SAED, TGA and PL were performed to characterize these materials. The results indicate that core–shell nanosphere structure and anatase crystallites of SiO₂@mTiO₂ are retained well after grafting the europium complex. Hybrid material Eu(tta)₃bpdc-SiO₂@mTiO₂ displays uniform nanosphere structure, bright red color and long lifetime, which can serve as a multicolor emission material modulated by using Al³⁺ ions via the cation exchange approach under a single-wavelength excitation. To the best of our knowledge, this work is the first multicolor emissive sensor for Al³⁺ ions based on the lanthanide hybrid material.

Stacked Reticular Frame Boosted Circularly Polarized Luminescence of Chiral Covalent Organic Frameworks

Chiral covalent organic frameworks (COFs) with circularly polarized luminescence (CPL) are intriguing as advanced chiroptical materials but have not been reported to date. We constructed chiroptical COF materials with CPL activity through the convenient Knoevenagel condensation of formyl-functionalized axially chiral linkers and C3-symmetric 1,3,5-benzenetriacetonitrile. Remarkably, the as-prepared chiral COFs showed high absorption and luminescent dissymmetric factors up to 0.02 (g_abs ) and 0.04 (g_lum ), respectively. In contrast, the branched chiral polymers from the same starting monomers were CPL silent. Structural and spectral characterization revealed that the reticular frame was indispensable for CPL generation via confined chirality transfer. Moreover, reticular stacking boosted the CPL performance significantly due to the interlayer restriction of frame. This work demonstrates the first example of a CPL-active COF and provides insight into CPL generation through covalent reticular chemistry, which will play a constructive role in the future design of high-performance CPL materials.

Understanding the Polymerization of Diphenylacetylenes with Tantalum(V) Chloride and Cocatalysts: Production of Cyclic Poly(diphenylacetylene)s by Low-Valent Tantalum Species Generated in Situ

A systematic investigation of the polymerization of representative diphenylacetylenes with TaCl₅ and cocatalysts suggested that low-valent Ta species, which are formed by in situ reduction of TaCl₅ by the cocatalysts, are involved in the polymerization and that the polymerization reaction proceeds by an insertion ring expansion mechanism via the formation of tantalacyclopentadiene intermediates, rather than the previously considered metathesis mechanism. This polymerization mechanism indicates the production of unprecedented cis-stereoregular cyclic poly(diphenylacetylene)s. Indeed, the possibilities of a cyclic structure and high cis-stereoregularity of the resulting polymers were reasonably supported by the results of their detailed atomic force microscopy (AFM) and NMR analyses, respectively.

Brightening up Circularly Polarized Luminescence of Monosubstituted Polyacetylene by Conformation Control: Mechanism, Switching, and Sensing

The first example of luminescent monosubstituted polyacetylenes (mono-PAs) is presented, based on a contracted cis-cisoid polyene backbone. It has an excellent circularly polarized luminescence (CPL) performance with a high dissymmetric factor (up to the order of 10^-1 ). The luminescence stems from the helical cis-cisoid PA backbone, which is tightly fixed by the strong intramolecular hydrogen bonds, thereby reversing the energy order of excited states and enabling an emissive energy dissipation. CPL switches are facilely achieved by the solvent and temperature through reversible conformational transition. By taking advantages of fast response and high sensitivity, the thin film of mono-PAs could be used as a CPL-based probe for quantitative detection of trifluoroacetic acid with a wider linear dynamic range than those of photoluminescence and circular dichroism. This work opens a new avenue to develop novel smart CPL materials through modulating conformational transition.

Biased Symmetry Breaking and Chiral Control by Self-Replicating in Achiral Tetradentate Platinum (II) Complexes

Obtaining homochirality from biased symmetry-breaking of self-assembly in achiral molecules remains a great challenge due to the lack of ingenious strategies and controlling their handedness. Here, we report the first case of biased symmetry breaking from achiral platinum (II) liquid crystals which self-organize into an enantiomerically enriched single domain without selection of handedness in twist grain boundary TGB ^[ *^] phase. Most importantly, the chiral control of self-organization can be achieved by using above the homochiral liquid crystal films with determined handedness (P or M) as a template. Moreover, benefiting from self-assembled superhelix, these complexes exhibit prominent circularly polarized luminescence with high |g_lum | up to 3.4×10^-3 in the TGB ^[ *^] mesophase. This work paves a neoteric avenue for the development of chiral self-assemblies from achiral molecules.

Synchronization in Non-Mirror-Symmetrical Chirogenesis: Non-Helical π–Conjugated Polymers with Helical Polysilane Copolymers in Co-Colloids

A curious question is whether two types of chiroptical amplifications, called sergeants-and-soldiers (Ser-Sol) and majority-rule (Maj) effects, between non-charged helical copolymers and non-charged, non-helical homopolymers occur when copolymer encounter homopolymer in co-colloids. To address these topics, the present study chose (i) two helical polysilane copolymers (HCPSs) carrying (S)- or (R)-2-methylbutyl with isobutyl groups as chiral/achiral co-pendants (type I) and (S)- and (R)-2-methylbutyl groups as chiral/chiral co-pendants (type II) and (ii) two blue luminescent π-conjugated polymers, poly[(dioctylfluorene)-alt-(trans-vinylene)] (PFV8) and poly(dioctylfluorene) (PF8). Analyses of circular dichroism (CD) and circularly polarized luminescence (CPL) spectral datasets of the co-colloids indicated noticeable, chiroptical inversion in the Ser-Sol effect of PFV8/PF8 with type I HCPS. PF8 with type IIHCPS showed the anomalous Maj rule with chiroptical inversion though PFV8 with type IIHCPS was the normal Maj effect. The noticeable non-mirror-symmetric CD-and-CPL characteristics and marked differences in hydrodynamic sizes of these colloids were assumed to originate from non-mirror-symmetrical main-chain stiffness of HCPSs in dilute toluene solution. The present chirality/helicity transfer experiments alongside of previous/recent publications reported by other workers and us allowed to raise the fundamental question; is mirror symmetry on macroscopic levels in the ground and photoexcited states rigorously conserved?

Small Figure-Eight Luminophores: Double-Twisted Tethered Cyclic Binaphthyls Boost Circularly Polarized Luminescence

Double-twisted cyclic binaphthyls, in which two naphthalenes are tethered by -O(CH₂ )_n O- linkage (n=1-3), have been synthesized. X-ray analyses and DFT calculations revealed a tightly constrained stereogenic figure-eight geometry. Tethering of two naphthalenes by short linkage forces a small dihedral angle, and the cyclic binaphthyls with short tether (n=1, 2) exhibit remarkable boosting of the g_lum value (1.0-1.6×10^-2 ) in circularly polarized luminescence (CPL) and unusual g_lum /g_abs ratios (0.93-1.3). These experimental high |g_lum | values are in accord with the results of excited state TD-DFT calculations, which show transannular interactions and that consequent extensive delocalization occurs throughout the figure-eight π-core. As a result, the present figure-eight luminophore promote the elongation of the magnetic transition dipole moment that results in significant increases in g_lum values.

Circularly Polarized Luminescence from Solvent-Free Chiral Organic π-Liquids

The solvent-free organic π-liquids have been attracting increasing attentions owing to the inherent optoelectronic properties accompanied by the advantages of non-volatility and high processability. Herein, we reported a series of naphthalene derivatives substituted with chiral branched alkyl chains, which are present as liquids (Nap1-3) or solid (Nap4) at room temperature, depending on the substitution positions. Circular dichroism (CD) and circularly polarized luminescence (CPL) were only observed for enantiomeric Nap2 (2,3-substituted) liquid. It is suggested that the chiral aggregation in the π-liquid leads to the CD signal and the chiral excimer resulting in the CPL performance. When achiral anthracene or pyrene was dissolved in Nap2, the π-liquid could serve as chirality and energy transfer media in which both CD and CPL emerged from the achiral anthracene. A CPL dissymmetry factor (|g_lum |) of anthracene reached to 5.2×10^-2 when dissolved in chiral Nap2 liquid, which is nearly two orders of magnitude higher than that of the pure Nap2 π-liquid.

Controlling Ultra-Large Optical Asymmetry in Amorphous Molecular Aggregations

Although ultra-large optical asymmetry appears in crystalline materials, distractions from the mesoscopic ordering often causes inauthenticity in chiropticity. In amorphous materials, however, it remains challenging and elusive to achieve large chiropticity. Herein, we report the quantitative control of chiral amplification, on amorphous supramolecular structures of cholesteryl-linked bis(dipyrrinato)zinc(II), to an exceptionally high level. A proper chiral packing of the building block at several molecular scale considerably contributes to the absorptive dissymmetry factor g_abs , although the system is overall disordered. The intense and tunable aggregation strength renders a variable g_abs value up to +0.10 and +0.31 in the solution and in film state. On this basis, a superior ON-OFF switching of chiropticity is realized under external stimuli. This work establishes a general design principle to control over ultra-large optical asymmetry on a wider scope of chiral materials.

Enantiomeric Switching of the Circularly Polarized Luminescence Processes in a Hierarchical Biomimetic System by Film Tilting

Circularly polarized luminescence (CPL) switching has attracted great attention due to the potential applications in chiral photonics and electronics. However, the lack of examples to achieve switchable CPL within a single material in the dry solid state hampers the scope of applications. Herein, we demonstrate a crystalline chiral polymer film as a polarizing medium consisting of radially assembled twisted crystallites, where achiral aggregation-induced emissive luminogens (AIEgens) are confined between the twisted crystalline stacks, eventually yielding handedness-switchable CPL by simple film tilting. Hierarchically organized twisted crystallites create the selective reflection activity of the polarizing medium. Upon film tilting, enantiomeric switching is realized by selectively collecting transmitted and reflected CPL components. The confined AIEgens in the crystalline polarizing system show a great enhancement of the luminescence efficiency. Moreover, the approach is general with broadband activity, and various AIEgens could be applied to generate full-color-tunable CPL. Additionally, the rigid and continuous nature of this polarizing system affords enhanced optical stability and facile modulation, developing a general route for designing chiroptical materials.