Reaction pathways for oxygen evolution promoted by cobalt catalyst

Single Entity Electrocatalysis

Making a measurement over millions of nanoparticles or exposed crystal facets seldom reports on reactivity of a single nanoparticle or facet, which may depart drastically from ensemble measurements. Within the past 30 years, science has moved toward studying the reactivity of single atoms, molecules, and nanoparticles, one at a time. This shift has been fueled by the realization that everything changes at the nanoscale, especially important industrially relevant properties like those important to electrocatalysis. Studying single nanoscale entities, however, is not trivial and has required the development of new measurement tools. This review explores a tale of the clever use of old and new measurement tools to study electrocatalysis at the single entity level. We explore in detail the complex interrelationship between measurement method, electrocatalytic material, and reaction of interest (e.g., carbon dioxide reduction, oxygen reduction, hydrazine oxidation, etc.). We end with our perspective on the future of single entity electrocatalysis with a key focus on what types of measurements present the greatest opportunity for fundamental discovery.

Copper-cobalt dual-site on N-doped carbon nanotube with dual-promoted synergy for glucose electrochemical detection

Doping specific active sites and accelerating the decisive step of glucose catalysis to construct highly active glucose sensing electrochemical catalysts remains a major challenge for glucose sensing. Herein, we report the detailed design of Cu-Co dual active site N-doped carbon nanotube (CuCo-NCNTs) obtained by electrodeposition modification, programmed warming and calcination for electrochemical glucose detection. In the CuCo-NCNTs material system, Cu serves as the main active site for glucose sensing. Co with good adsorption of hydroxyl groups acts as the site providing hydroxyl groups to provide oxygen source for Cu oxidized glucose sensing. The synergistic effect between the two active sites in the Cu-Co system and the abundant micro-reactive sites exposed by carbon nanotubes greatly ensure the excellent electrocatalytic performance of glucose oxidation reaction. Therefore, CuCo-NCNTs have good electrocatalytic performance with a sensitivity of 0.84 mA mM-1 cm-2 and a detection limit of 1 μM, and also have excellent stability and specificity. DFT calculations elucidate the decisive steps of H-atom removal in the oxidation of glucose by Cu active site N-doped carbon nanotube (Cu-NCNTs) and Co active site N-doped carbon nanotube (CuCo-NCNTs) materials, illustrating the role of oxygen source provided by hydroxyl group adsorption in the electrochemical sensing process of glucose, thus demonstrating that the electrochemical sensing signal of glucose can be effectively enhanced when cobalt species that readily adsorb hydroxyl groups are introduced into the materials.

On the nature of Con±/0 clusters reacting with water and oxygen

Bulk cobalt does not react with water at room temperature, but cobalt nanometals could yield corrosion at ambient conditions. Insights into the cobalt cluster reactions with water and oxygen enable us to better understand the interface reactivity of such nanometals. Here we report a comprehensive study on the gas-phase reactions of Con±/0 clusters with water and oxygen. All these Con±/0 clusters were found to react with oxygen, but only anionic cobalt clusters give rise to water dissociation whereas the cationic and neutral ones are limited to water adsorption. We elucidate the influences of charge states, bonding modes and dehydrogenation mechanism of water on typical cobalt clusters. It is unveiled that the additional electron of anionic Con- clusters is not beneficial to H2O adsorption, but allows for thermodynamics- and kinetics-favourable H atom transfer and dehydrogenation reactions. Apart from the charge effect, size effect and spin effect play a subtle role in the reaction process. The synergy of multiple metal sites in Con- clusters reduces the energy barrier of the rate-limiting step enabling hydrogen release. This finding of water dissociation on cobalt clusters put forward new connotations on the activity series of metals, providing new insights into the corrosion mechanism of cobalt nanometals.

Amorphous Ni-Fe-Mo Oxides Coupled with Crystalline Metallic Domains for Enhanced Electrocatalytic Oxygen Evolution by Promoted Lattice-Oxygen Participation

The crystalline/amorphous heterophase nanostructures are promising functional materials for biomedicals, catalysis, energy conversion, and storage. Despite great progress is achieved, facile synthesis of crystalline metal/amorphous multinary metal oxides nanohybrids remains challenging, and their electrocatalytic oxygen evolution reaction (OER) performance along with the catalytic mechanism are not systematically investigated. Herein, two kinds of ultrafine crystalline metal domains coupled with amorphous Ni-Fe-Mo oxides heterophase nanohybrids, including Ni/Ni0.5-a Fe0.5 Mo1.5 Ox and Ni-FeNi3 /Ni0.5-b Fe0.5-y Mo1.5 Ox , are fabricated through controllable reduction of amorphous Ni0.5 Fe0.5 Mo1.5 Ox precursors by simply tuning the amount of used reductant. Due to the suited component in metal domains, the special structure with dense crystalline/amorphous interfaces, and strong electronic coupling of their components, the resultant Ni-FeNi3 /Ni0.5-b Fe0.5-y Mo1.5 Ox nanohybrids show greatly enhanced OER activity with a low overpotential (278 mV) to reach 10 mA cm-2 current density and ultrahigh turnover frequency (38160 h-1 ), outperforming Ni/Ni0.5-a Fe0.5 Mo1.5 Ox , Ni0.5 Fe0.5 Mo1.5 Ox precursors, commercial IrO2 , and most of recently reported OER catalysts. Also, such Ni-FeNi3 /Ni0.5-b Fe0.5-y Mo1.5 Ox nanohybrids manifest good catalytic stability. As revealed by a series of spectroscopy and electrochemical analyses, their OER mechanism follows the lattice-oxygen-mediated (LOM) pathway. This work may shed light on the design of advanced heterophase nanohybrids, and promote their applications in water splitting, metal-air batteries, or other clean energy fields.

Understanding the reaction mechanism and kinetics of photocatalytic oxygen evolution on CoOx-loaded bismuth vanadate

Photocatalytic water splitting for green hydrogen production is hindered by the sluggish kinetics of oxygen evolution reaction (OER). Loading a co-catalyst is essential for accelerating the kinetics, but the detailed reaction mechanism and role of the co-catalyst are still obscure. Here, we focus on cobalt oxide (CoOx) loaded on bismuth vanadate (BiVO4) to investigate the impact of CoOx on the OER mechanism. We employ photoelectrochemical impedance spectroscopy and simultaneous measurements of photoinduced absorption and photocurrent. The reduction of V5+ in BiVO4 promotes the formation of a surface state on CoOx that plays a crucial role in the OER. The third-order reaction rate with respect to photohole charge density indicates that reaction intermediate species accumulate in the surface state through a three-electron oxidation process prior to the rate-determining step. Increasing the excitation light intensity onto the CoOx-loaded anode improves the photoconversion efficiency significantly, suggesting that the OER reaction at dual sites in an amorphous CoOx(OH)y layer dominates over single sites. Therefore, CoOx is directly involved in the OER by providing effective reaction sites, stabilizing reaction intermediates, and improving the charge transfer rate. These insights help advance our understanding of co-catalyst-assisted OER to achieve efficient water splitting.

Unraveling Sequential Oxidation Kinetics and Determining Roles of Multi-Cobalt Active Sites on Co3O4 Catalyst for Water Oxidation

The multi-redox mechanism involving multi-sites has great implications to dictate the catalytic water oxidation. Understanding the sequential dynamics of multi-steps in oxygen evolution reaction (OER) cycles on working catalysts is a highly important but challenging issue. Here, using quasi-operando transient absorption (TA) spectroscopy and a typical photosensitization strategy, we succeeded in resolving the sequential oxidation kinetics involving multi-active sites for water oxidation in OER catalytic cycle, with Co₃O₄ nanoparticles as model catalysts. When OER initiates from fast oxidation of surface Co²⁺ ions, both surface Co²⁺ and Co³⁺ ions are active sites of the multi-cobalt centers for water oxidation. In the sequential kinetics (Co²⁺ → Co³⁺ → Co⁴⁺), the key characteristic is fast oxidation and slow consumption for all the cobalt species. Due to this characteristic, the Co⁴⁺ intermediate distribution plays a determining role in OER activity and results in the slow overall OER kinetics. These insights shed light on the kinetic understanding of water oxidation on heterogeneous catalysts with multi-sites.

Electrocatalytic water oxidation on CuO-Cu2O modulated cobalt-manganese layered double hydroxide

Layered double hydroxides (LDH) are potential electrocatalysts to address the sluggish oxygen evolution reaction (OER) of water splitting. In this work, copper oxide (CuO/Cu2O) nanoparticles are integrated with cobalt-manganese layered double hydroxide (CoMn-LDH) to enhance their performance towards OER. The catalyst is synthesized by growing CoMn-LDH nanosheets in the presence of CuO/Cu2O nanoparticles that were obtained by the calcination of the copper containing metal-organic framework (HKUST-1). The synthesized CoMn-LDH@CuO/Cu2O electrocatalyst shows excellent activity towards OER with an overpotential of 297 mV at a catalytic current density of 10 mA cm-2 and have a Tafel slope value of 89 mV dec-1. Moreover, a slight decrease in the performance parameters is observed until the 15 h of continuous operation. We propose that the conductive strength of CuO/Cu2O and its synergistic effect with the CoMn-LDH are responsible for the improved OER performance of the desired electrocatalyst.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Magnetic-Field-Induced Strain Enhances Electrocatalysis of FeCo Alloys on Anode Catalysts for Water Splitting

In water splitting, the oxygen evolution reaction (OER) performance of transition metal alloy catalysts needs to be further improved. To solve this problem, the method of an external magnetic field was used to improve the OER catalytic performance of the alloy catalyst. In this paper, FeCo alloys with different composition ratios were prepared by an arc melting method, and OER catalysts with different compositions were obtained by annealing treatment. Under the action of a magnetic field, all three groups of catalysts showed a better catalytic performance than those without a magnetic field. The overpotentials of Fe35Co65, Fe22Co78 and Fe15Co85 at a current density of 20 mA cm−2 were reduced by 12 mV, 6 mV and 2 mV, respectively. It is found that, due to the magnetostrictive properties of FeCo alloys, the catalyst itself will generate strain under the action of a magnetic field, and the existence of strain may be the main reason for the enhanced OER performance of the magnetic field. Therefore, this work provides a new idea for the development of magnetic material catalysts and a magnetic field to improve the performance of catalysts.

Self-healing oxygen evolution catalysts

Electrochemical and photoelectrochemical water splitting offers a scalable approach to producing hydrogen from renewable sources for sustainable energy storage. Depending on the applications, oxygen evolution catalysts (OECs) may perform water splitting under a variety of conditions. However, low stability and/or activity present challenges to the design of OECs, prompting the design of self-healing OECs composed of earth-abundant first-row transition metal oxides. The concept of self-healing catalysis offers a new tool to be employed in the design of stable and functionally active OECs under operating conditions ranging from acidic to basic solutions and from a variety of water sources.

Large scale sustainable energy storage by water splitting benefits from performing the oxygen evolution reaction under a variety of conditions. Here, the authors discuss self-healing catalysis as a new tool in the design of stable and functionally active catalysts in acidic to basic solutions, and a variety of water sources

Computational mechanistic studies of ruthenium catalysed methanol dehydrogenation

Homogeneous ruthenium catalysed methanol dehydrogenation could become a key reaction for hydrogen production in liquid fuel cells. In order to improve existing catalytic systems, mechanistic insight is paramount in directing future studies. Herein, we describe what computational mechanistic research has taught us so far about ruthenium catalysed dehydrogenation reactions. In general, two mechanistic pathways can be operative in these reactions: a metal-centered or a metal-ligand cooperative (Noyori-Morris type) minimum energy reaction pathway (MERP). Discerning between these mechanisms on the basis of computational studies has proven to be highly input dependent, and to circumvent pitfalls it is important to consider several factors, such as solvent effects, metal-ligand cooperativity, alternative geometries, and complex electronic structures of metal centres. This Frontiers article summarizes the reported computational research performed on ruthenium catalyzed dehydrogenation reactions performed in the past decade, and serves as a guide for future research.

Semiconducting Polymers for Oxygen Evolution Reaction under Light Illumination

Sunlight-driven water splitting to produce hydrogen fuel has stimulated intensive scientific interest, as this technology has the potential to revolutionize fossil fuel-based energy systems in modern society. The oxygen evolution reaction (OER) determines the performance of overall water splitting owing to its sluggish kinetics with multielectron transfer processing. Polymeric photocatalysts have recently been developed for the OER, and substantial progress has been realized in this emerging research field. In this Review, the focus is on the photocatalytic technologies and materials of polymeric photocatalysts for the OER. Two practical systems, namely, particle suspension systems and film-based photoelectrochemical systems, form two main sections. The concept is reviewed in terms of thermodynamics and kinetics, and polymeric photocatalysts are discussed based on three key characteristics, namely, light absorption, charge separation and transfer, and surface oxidation reactions. A satisfactory OER performance by polymeric photocatalysts will eventually offer a platform to achieve overall water splitting and other advanced applications in a cost-effective, sustainable, and renewable manner using solar energy.

Eliminating Delocalization Error to Improve Heterogeneous Catalysis Predictions with Molecular DFT + U

Approximate semilocal density functional theory (DFT) is known to underestimate surface formation energies yet paradoxically overbind adsorbates on catalytic transition-metal oxide surfaces due to delocalization error. The low-cost DFT + U approach only improves surface formation energies for early transition-metal oxides or adsorption energies for late transition-metal oxides. In this work, we demonstrate that this inefficacy arises due to the conventional usage of metal-centered atomic orbitals as projectors within DFT + U. We analyze electron density rearrangement during surface formation and O atom adsorption on rutile transition-metal oxides to highlight that a standard DFT + U correction fails to tune properties when the corresponding density rearrangement is highly delocalized across both metal and oxygen sites. To improve both surface properties simultaneously while retaining the simplicity of a single-site DFT + U correction, we systematically construct multi-atom-centered molecular-orbital-like projectors for DFT + U. We demonstrate this molecular DFT + U approach for tuning adsorption energies and surface formation energies of minimal two-dimensional models of representative early (i.e., TiO₂) and late (i.e., PtO₂) transition-metal oxides. Molecular DFT + U simultaneously corrects adsorption energies and surface formation energies of multilayer models of rutile TiO₂(110) and PtO₂(110) to resolve the paradoxical description of surface stability and surface reactivity of semilocal DFT.

Molybdenum doped induced amorphous phase in cobalt acid nickel for supercapacitor and oxygen evolution reaction

Reasonable structural design and metal-doping play significant roles in the optimization of electrochemical energy storage and conversion. Herein, in situ growth of Molybdenum-doped amorphous cobalt acid nickel nanoneedles on Ni foam (Mo-NiCo₂O₄/NF) has been successfully synthesized by a simple hydrothermal-annealing strategy. Benefiting from the unique hierarchical nanostructures and doping-optimized electronic structural configuration, the cross-link network structure of Mo-doped amorphous NiCo₂O₄ with large specific surface areas exhibit excellent supercapacitor performance and electrocatalytic activity. As expected, the optimized Mo-doped NiCo₂O₄ samples possess a specific capacitance of 3970 mF cm^-2 at 1 mA cm^-2 and remarkable rate performance. The assembled hybrid supercapacitor obtains a maximum energy density of 35 Wh kg^-1 (420 W kg^-1) and keeps a capacitance retention of 107% after 5000 cycles. As an electrocatalyst, Mo-NiCo₂O₄/NF shows a rapid self-reconstruction process during oxygen evolution reaction (OER) that produces rich oxygen vacancies and thus exhibits remarkable long-term stability. The nanocomposites exhibit small overpotential (280 mV at 10 mA cm^-2) and Tafel slope (43 mV dec^-1). These results strongly demonstrate that both local amorphous phase and porous hierarchical structure design from Mo dopant provide superiorities for the synthesis of efficient and stable multifunctional electrode materials for energy storage and conversion.

NiSe2/FeSe2 heterostructured nanoparticles supported on rGO for efficient water electrolysis

Hybrid architectures composed of NiSe2/FeSe2 heterostructured nanoparticles supported on rGO were synthesized through a facile self-templating strategy, and exhibited excellent electrocatalytic performance for overall water splitting.

Graphene oxide wrapped Mix-valent cobalt phosphate hollow nanotubes as oxygen evolution catalyst with low overpotential

Development of an efficient, stable and inexpensive catalyst for oxygen evolution reaction (OER) is critical to electrochemical water splitting. In this regard, a precious-metal free electrocatalyst has been synthesized employing a hydrothermal route. The prepared graphene oxide wrapped cobalt phosphate nanotubes deposited on Ni foam electrode shows a low overpotential of 234 mV at a current density of 10 mA/cm² for OER in 1(M) KOH, lower than a benchmarking electrocatalyst IrO₂ at the same current density. The performance figures clearly defy the volcano limitations. The mixed-valency induced delocalization of charge satisfies Sabatier Principle for ideal catalysts and graphene oxide ensures improved charge transfer. Moreover, the designed electrocatalyst performs efficiently even on prolonged use under mass transfer limitation conditions.

Plant polyphenols induced the synthesis of rich oxygen vacancies Co3O4/Co@N-doped carbon hollow nanomaterials for electrochemical energy storage and conversion

Reasonable hollow structure design and oxygen vacancy defects control play an important role in the optimization of electrochemical energy storage and electrocatalytic properties. Herein, a plant polyphenol tannic acid was used to etch Co-based zeolitic imidazolate framework (ZIF-67) followed by calcination to prepare a porous Co₃O₄@Co/NC hollow nanoparticles (Co₃O₄@Co/NC-HN) with rich oxygen vacancy defects. Owing to the metal-phenolic networks (MPNs), rich oxygen vacancy defects and the synergistic effect between Co₃O₄ and Co/NC, the box-like Co₃O₄@Co/NC-HN nanomaterials with large specific surface areas exhibit excellent supercapacitor performance and electrocatalytic activity. As expected, Co₃O₄@Co/NC-HN shows high specific capacity (273.9 mAh g^-1 at 1 A g^-1) and remarkable rate performance. Moreover, the assembled Hybrid supercapacitor (HSC, Co₃O₄@Co/NC-HN//Active carbon) device obtained a maximum energy density of 57.8 Wh kg^-1 (800 W kg^-1) and exhibited superior cycle stability of 92.6% after 4000 cycles. Notably, as an electrocatalyst, the nanocomposites exhibit small overpotential and Tafel slope. These results strongly demonstrate that both unique hollow structure and abundant oxygen vacancies designed from plant polyphenols provide superiorities for the synthesis of efficient and green multifunctional electrode materials for energy storage and conversion.

Detection of high-valent iron species in alloyed oxidic cobaltates for catalysing the oxygen evolution reaction

Iron alloying of oxidic cobaltate catalysts results in catalytic activity for oxygen evolution on par with Ni-Fe oxides in base but at much higher alloying compositions. Zero-field ⁵⁷Fe Mössbauer spectroscopy and X-ray absorption spectroscopy (XAS) are able to clearly identify Fe⁴⁺ in mixed-metal Co-Fe oxides. The highest Fe⁴⁺ population is obtained in the 40–60% Fe alloying range, and XAS identifies the ion residing in an octahedral oxide ligand field. The oxygen evolution reaction (OER) activity, as reflected in Tafel analysis of CoFeO_x films in 1 M KOH, tracks the absolute concentration of Fe⁴⁺. The results reported herein suggest an important role for the formation of the Fe⁴⁺ redox state in activating cobaltate OER catalysts at high iron loadings.

The capturing of high valent iron in a catalytic reaction is important but difficult task. Here, the authors report identification of a high-valent Fe(IV)-species with different spectroscopic tools such as Mössbauer spectroscopy and X-ray absorption spectroscopy during the course of an oxygen evolving reaction.

Loading of individual Se-doped Fe2O3-decorated Ni/NiO particles on carbon cloth: facile synthesis and efficient electrocatalysis for the oxygen evolution reaction

The synthesis of competitive, affordable and sustainable electrocatalysts via simple and scalable methods is highly desirable for the oxygen evolution reaction (OER). Usually, expensive, complex, time-consuming methods are applied to prepared suitable electrocatalysts for the OER. In contrast, a single-step thermal method is simple and inexpensive. Nickel and iron-based composite materials are potential candidates as OER catalysts. Accordingly, herein, Se-doped Fe2O3-decorated Ni/NiO particles on carbon cloth (Se-Fe2O3@Ni/NiO/CC) were synthesized via a facile and scalable one-step thermal method. The individual Se-Fe2O3@Ni/NiO particles were accommodated in holes in the carbon fibers of CC. The optimized Se-Fe2O3@Ni/NiO/CC-2 sample exhibited an outstanding OER performance with an overpotential of 205 mV at the current density 10 mA cm-2, small Tafel slope of 36 mV dec-1, and good stability in 1.0 M KOH electrolyte. The outstanding catalytic performance was mainly attributed to the heterointerfaces between Se-Fe2O3 and Se-Ni/NiO. Moreover, the accommodation of the Se-Fe2O3@Ni/NiO particles in the holes of CC restricted the aggregation of the particles, and CC provided a conductive substrate for the OER process. Thus, this work provides a simple, scalable and effective strategy for designing and engineering of outstanding electrocatalysts for the OER.

Cobalt Metal-Organic Framework Based on Layered Double Nanosheets for Enhanced Electrocatalytic Water Oxidation in Neutral Media

A new cobalt metal-organic framework (2D-Co-MOF) based on well-defined layered double cores that are strongly connected by intermolecular bonds has been developed. Its 3D structure is held together by π-π stacking interactions between the labile pyridine ligands of the nanosheets. In aqueous solution, the axial pyridine ligands are exchanged by water molecules, producing a delamination of the material, where the individual double nanosheets preserve their structure. The original 3D layered structure can be restored by a solvothermal process with pyridine, so that the material shows a "memory effect" during the delamination-pillarization process. Electrochemical activation of a 2D-Co-MOF@Nafion-modified graphite electrode in aqueous solution improves the ionic migration and electron transfer across the film and promotes the formation of the electrocatalytically active cobalt species for the oxygen evolution reaction (OER). The so-activated 2D-Co-MOF@Nafion composite exhibits an outstanding electrocatalytic performance for the OER at neutral pH, with a TOF value (0.034 s^-1 at an overpotential of 400 mV) and robustness superior to those reported for similar electrocatalysts under similar conditions. The particular topology of the delaminated nanosheets, with quite distant cobalt centers, precludes the direct coupling between the electrocatalytically active centers of the same sheet. On the other hand, the increase in ionic migration across the film during the electrochemical activation stage rules out the intersheet coupling between active cobalt centers, as this scenario would impair electrolyte permeation. Altogether, the most plausible mechanism for the O-O bond formation is the water nucleophilic attack to single Co(IV)-oxo or Co(III)-oxyl centers. Its high electrochemical efficiency suggests that the presence of nitrogen-containing aromatic equatorial ligands facilitates the water nucleophilic attack, as in the case of the highly efficient cobalt porphyrins.

2D MOFs with Ni(II), Cu(II), and Co(II) as Efficient Oxygen Evolution Electrocatalysts: Rationalization of Catalytic Performance vs Structure of the MOFs and Potential of the Redox Couples

Earth-abundant transition-metal-based metal-organic frameworks (MOFs) are of immense interest for the development of efficient and durable heterogeneous water splitting electrocatalysts. This repot explores the design of two-dimensional (2D) MOFs with redox-active metal centers (Ni(II), Co(II), and Cu(II)) containing two types of electron-rich linkers such as bis(5-azabenzimidazole), linear L₁ and angular L₂, and aromatic dicarboxylates. The electron-rich linkers are considered to stabilize the higher oxidation state of the redox-active metal centers in the course of the electrocatalytic oxygen evolution reaction (OER) process. The 2D MOFs of L₁ and L₂ with Co(II) (1 and 3) and Ni(II) (2 and 4) have been produced via the conventional hydrothermal synthesis, while the MOFs of Cu(II) (Cu@1 and Cu@3) are obtained by the postsynthetic transmetallation reaction of MOFs 1 and 3. The electrocatalytic OER activities of the six MOFs have been studied to explore the influence of the redox potential of the transition-metal quasi-reversible couples and the coordination environment around the redox-active metal centers in the electrocatalytic activity. The lowest overpotential of 370 mV exhibited by MOF 2 with the highest current density and TOF value indicates the importance of the presence of coordinated water molecules and the lowest redox potential value of the most favorable quasi-reversible couple Ni⁺²/Ni⁺³. These catalysts exhibit a remarkable stability up to 1000 OER cycles. These studies pave the way for the design of MOF materials toward the development of a promising heterogeneous OER electrocatalyst.

Reactivity of Cobalt Clusters Con±/0 with Ammonia: Co3+ Cluster Catalysis for NH3 Dehydrogenation

A customized reflection time-of-flight (Re-TOF) mass spectrometer combined with a 177 nm deep-ultraviolet laser has enabled us to observe well-resolved cobalt clusters Co_n^±/0 and perform a comprehensive study of their reactivity with ammonia (NH₃). The anions Co_n^- are found to be inert, the neutrals allow the adsorption of multiple NH₃ molecules, while the cationic Co_n⁺ clusters readily react with NH₃ giving rise to dehydrogenation. However, incidental dehydrogenation of NH₃ on Co_n⁺ is only observed for n ≥ 3. The dramatic charge- and size-dependent reactivities of Co_n^±/0 clusters with NH₃ are studied by the density functional theory (DFT)-calculation results of energetics, density of states, orbital interactions, and reaction dynamics. We illustrate the dehydrogenation from two NH₃ molecules, where a significantly reduced transition-state energy barrier is found pertaining to the dimolecular co-catalysis effect. The reactivity of Co₃⁺ with NH₃ is illustrated showing effective catalysis for N-H dissociation to produce hydrogen applicable for designing ammonia fuel cells.

Characterizing electronic and atomic structures for amorphous and molecular metal oxide catalysts at functional interfaces by combining soft X-ray spectroscopy and high-energy X-ray scattering

Amorphous thin film materials and heterogenized molecular catalysts supported on electrode and other functional interfaces are widely investigated as promising catalyst formats for applications in solar and electrochemical fuels catalysis. However the amorphous character of these catalysts and the complexity of the interfacial architectures that merge charge transport properties of electrode and semiconductor supports with discrete sites for multi-step catalysis poses challenges for probing mechanisms that activate and tune sites for catalysis. This minireview discusses advances in soft X-ray spectroscopy and high-energy X-ray scattering that provide opportunities to resolve interfacial electronic and atomic structures, respectively, that are linked to catalysis. This review discusses how these techniques can be partnered with advances in nanostructured interface synthesis for combined soft X-ray spectroscopy and high-energy X-ray scattering analyses of thin film and heterogenized molecular catalysts. These combined approaches enable opportunities for the characterization of both electronic and atomic structures underlying fundamental catalytic function, and that can be applied under conditions relevant to device applications.

Visualising electrochemical reaction layers: mediated vs. direct oxidation

Electrochemical treatments are widely used for 'clean up' in which toxic metals and organic compounds are removed using direct or mediated electrolysis. Herein we report novel studies offering proof of concept that spectrofluorometric electrochemistry can provide important mechanistic detail into these processes. A thin layer opto-electrochemical cell, with a carbon fibre (radius 3.5 μm) working electrode, is used to visualise the optical responses of the oxidative destruction of a fluorophore either directly, on an electrode, or via the indirect reaction of the analyte with an electrochemically formed species which 'mediates' the destruction. The optical responses of these two reaction mechanisms are first predicted by numerical simulation followed by experimental validation of each using two fluorescent probes, a redox inactive (in the electrochemical window) 1,3,6,8-pyrenetetrasulfonic acid and the redox-active derivative 8-hydroxypyrene-1,3,6-trisulfonic acid. In the vicinity of a carbon electrode held at different oxidative potentials, the contrast between indirect electro-destruction, chlorination, and direct oxidation is very obvious. Excellent agreement is seen between the numerically predicted fluorescence intensity profiles and experiment.

Operando Raman spectroscopy tracks oxidation-state changes in an amorphous Co oxide material for electrocatalysis of the oxygen evolution reaction

Transition metal oxides are of high interest in both energy storage (batteries) and production of non-fossil fuels by (photo)electrocatalysis. Their functionally crucial charge (oxidation state) changes and electrocatalytic properties are best investigated under electrochemical operation conditions. We established operando Raman spectroscopy for investigation of the atomic structure and oxidation state of a non-crystalline, hydrated, and phosphate-containing Co oxide material (CoCat), which is an electrocatalyst for the oxygen evolution reaction (OER) at neutral pH and is structurally similar to LiCoO₂ of batteries. Raman spectra were collected at various sub-catalytic and catalytic electric potentials. ²H labeling suggests Co oxidation coupled to Co-OH deprotonation at catalytic potentials. ¹⁸O labeling supports O-O bond formation starting from terminally coordinated oxygen species. Two broad bands around 877 cm^-1 and 1077 cm^-1 are assigned to CoCat-internal H₂PO₄ ^-. Raman peaks corresponding to terminal oxide (Co=O) or reactive oxygen species were not detectable; 1000-1200 cm^-1 bands were instead assigned to two-phonon Raman scattering. At an increasingly positive potential, the intensity of the Raman bands decreased, which is unexpected and explained by self-absorption relating to CoCat electrochromism. A red-shift of the Co-O Raman bands with increasing potentials was described by four Gaussian bands of potential-dependent amplitudes. By linear combination of Raman band amplitudes, we can follow individually the Co(2+/3+) and Co(3+/4+) redox transitions, whereas previously published x-ray absorption spectroscopy analysis could determine only the averaged Co oxidation state. Our results show how electrochemical operando Raman spectroscopy can be employed as a potent analytical tool in mechanistic investigations on OER catalysis.

N- & S-co-doped carbon nanofiber network embedded with ultrafine NiCo nanoalloy for efficient oxygen electrocatalysis and Zn-air batteries

A novel 3D N- & S-co-doped carbon nanofiber network embedded with ultrafine NiCo oxide nanoparticles is explored by a facile surfactant-assisted electrospinning method. This catalyst has several structural advantages including ultrafine active sites (2-8 nm), hierarchical pores, and abundant defects, allowing for much higher OER/ORR activity compared to commercial IrO2 and Pt/C catalysts. The potential gap (ΔE) of OER and ORR metrics for NSCFs/Ni-Co-NiCo2O is 0.69 V and the Zn-air battery equipped with NSCFs/Ni-Co-NiCo2O as the air cathode delivers a maximum power density of 171.24 mW cm-2 at 268 mA cm-2. Furthermore, the unique structure of the 3D carbon nanofiber network embedded with ultrafine nanoparticles results in superior stability with negligible degradation in activity after 380 h of continuous operation.

A tetranuclear cobalt(ii) phosphate possessing a D4R core: an efficient water oxidation catalyst

The reaction of Co(OAc)2·4H2O with a sterically hindered phosphate ester, LH2, afforded a tetranuclear complex, [CoII(L)(CH3CN)]4·5CH3CN (1) [LH2 = 2,6-(diphenylmethyl)-4-isopropyl-phenyl phosphate]. The molecular structure of 1 reveals that it is a tetranuclear assembly where the Co(ii) centers are present in the alternate corners of a cube. The four Co(ii) centers are held together by four di-anionic [L]2- ligands. The fourth coordination site on Co(ii) is taken by an acetonitrile ligand. Changing the Co(ii) precursor from Co(OAc)2·4H2O to Co(NO3)2·6H2O afforded a mononuclear complex [CoII(LH)2(CH3CN)2(MeOH)2](MeOH)2 (2). In 2, the Co(ii) centre is surrounded by two monoanionic [LH]- ligands and a pair of methanol and acetonitrile solvents in a six-coordinate arrangement. 1 has been found to be an efficient catalyst for electrochemical water oxidation under highly basic conditions while the mononuclear analogue, 2, does not respond to electrochemical water oxidation. The tetranuclear catalyst has excellent electrochemical stability and longevity, as established by chronoamperometry and >1000 cycle durability tests under highly alkaline conditions. Excellent current densities of 1 and 10 mA cm-2 were achieved with overpotentials of 354 and 452 mV respectively. The turnover frequency of this catalyst was calculated to be 5.23 s-1 with an excellent faradaic efficiency of 97%, indicating the selective oxygen evolution reaction (OER) occurring with the aid of this catalyst. A mechanistic insight into the higher activity of complex 1 towards the OER compared to that of complex 2 is also provided using density functional theory based calculations.

Flexible Active-Site Engineering of Monometallic Co-Layered Double Hydroxides for Achieving High-Performance Bifunctional Electrocatalyst toward Oxygen Evolution and H2O2 Reduction

It is highly desirable but challenging to develop a facile and scalable strategy to synthesize efficient bifunctional electrocatalysts for oxygen evolution and H₂O₂ reduction by engineering the active site of monometallic-layered double hydroxides (LDHs). Herein, we developed a convenient, efficient, and scalable method for the construction of monometallic Co-LDHs with tunable Coⁿ⁺ (n = 2, 3) concentration by a one-pot solvothermal reaction in a short time (e.g., 2 and 4 h) using only cobalt nitrate and hexamine as raw materials. The catalytic performance of Co-LDHs was mainly determined by the Coⁿ⁺ (n = 2, 3) concentration, which could be simply regulated by tuning the solvothermal time. Combining the joint merits of three-dimensional flowerlike architecture (abundant accessible active sites and a fast electron/mass transport), Co-LDHs-4 with abundant Co³⁺ species exhibited an excellent electrocatalytic activity for oxygen evolution reaction in terms of a low overpotential at 10 mA cm^-2 (η₁₀ = 241 mV) and long-term durability for 70 h at 100 mA cm^-2, better than the state-of-the-art IrO₂ and most of the reported analogues. Besides, Co-LDHs-2 enriched in Co²⁺ displayed a superior electrochemical activity for H₂O₂ detection with a broad linear range (0.002-20 mM), a low detection limit (0.002 mM), and a high response sensitivity (272.02 μA mM^-1 cm^-2). Therefore, this work opens a new horizon for the rational development of a highly active electrocatalyst with tunable concentrations of active components.

Bifunctional Catalysts for Reversible Oxygen Evolution Reaction and Oxygen Reduction Reaction

Metal-air batteries (MABs) and reversible fuel cells (RFCs) rely on the bifunctional oxygen catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). Finding efficient bifunctional oxygen catalysts is the ultimate goal and it has attracted a great deal of attention. The dilemma is that a good ORR catalyst is not necessarily efficient for OER, and vice versa. Thus, the development of a new type of bifunctional oxygen catalysts should ensure that the catalysts exhibit high activity for both OER and ORR. Composites with multicomponents for active centers supported on highly conductive matrices could be able to meet the challenges and offering new opportunities. In this Review, the evolution of bifunctional catalysts is summarized and discussed aiming to deliver high-performance bifunctional catalysts with low overpotentials.

Gold Nanoclusters as Electrocatalysts for Energy Conversion

Gold nanoclusters (Aun NCs) exhibit a size-specific electronic structure unlike bulk gold and can therefore be used as catalysts in various reactions. Ligand-protected Aun NCs can be synthesized with atomic precision, and the geometric structures of many Aun NCs have been determined by single-crystal X-ray diffraction analysis. In addition, Aun NCs can be doped with various types of elements. Clarification of the effects of changes to the chemical composition, geometric structure, and associated electronic state on catalytic activity would enable a deep understanding of the active sites and mechanisms in catalytic reactions as well as key factors for high activation. Furthermore, it may be possible to synthesize Aun NCs with properties that surpass those of conventional catalysts using the obtained design guidelines. With these expectations, catalyst research using Aun NCs as a model catalyst has been actively conducted in recent years. This review focuses on the application of Aun NCs as an electrocatalyst and outlines recent research progress.

Photo/electrocatalysis and photosensitization using metal nanoclusters for green energy and medical applications

Owing to the rapidly increasing demand for sustainable technologies in fields such as energy, environmental science, and medicine, nanomaterial-based photo/electrocatalysis has received increasing attention. Recently, synthetic innovations have allowed the fabrication of atomically precise metal nanoclusters (NCs). These NCs show potential for green energy and medical applications. The present article primarily focuses on evaluation of the recent developments in the photo/electrocatalytic and photosensitizing characteristics of metal and alloy NCs. The review comprises two sections: (i) photo/electrocatalysis for green energy and (ii) photosensitization for biomedical therapy applications. Finally, the challenges associated with the use of metal NCs are presented on the basis of current developments.

Coordination polymers as heterogeneous catalysts in hydrogen evolution and oxygen evolution reactions

This article highlights various strategies of designing coordination polymers for catalysing water splitting reactions.

Molecular Vibrations of an Oxygen-Evolving Complex and Its Synthetic Mimic

Bio-inspired catalysis for artificial photosynthesis has been widely studied for decades, in particular, with the purpose of using bio-disposable and non-toxic metals as building blocks. The characterisation of such catalysts has been achieved by using different kinds of spectroscopic methods, from X-ray crystallography to NMR spectroscopy. An artificial Mn₄ CaO₄ cubane cluster with dangling Mn₄ was synthesised in 2015 [Zhang et al. Science 2015, 348, 690-693]; this cluster showed many structural similarities to that of the natural oxygen-evolving complex. An accurate structural and spectroscopic comparison between the natural and artificial systems is highly relevant to understand the catalytic mechanism. Among data from different techniques, the differential FTIR spectra (S_n+1 -S_n ) of photosystem II are still lacking a complete interpretation. The availability of IR data of the artificial cluster offers a unique opportunity to assign absolute absorption spectra on a well-defined and easier to interpret analogous moiety. The present work aims to investigate the novel inorganic compound as a model system for an oxygen-evolving complex through measurement of its spectroscopic properties. The experimental results are compared with calculations by using a variety of theoretical methods (normal mode analysis, effective normal mode analysis) in the S₁ state. We underline the similarities and the differences in the computational spectra based on atomistic models of Mn₄ CaO₅ and Mn₄ CaO₄ complexes.