Relation between Structure and Electronic Properties of Amorphous MEH-PPV Polymers

Counterion docking: a general approach to reducing energetic disorder in doped polymeric semiconductors

Molecular doping plays an important role in controlling the carrier concentration of organic semiconductors. However, the introduction of dopant counterions often results in increased energetic disorder and traps due to the molecular packing disruption and Coulomb potential wells. To date, no general strategy has been proposed to reduce the counterion-induced structural and energetic disorder. Here, we demonstrate the critical role of non-covalent interactions (NCIs) between counterions and polymers. Employing a computer-aided approach, we identified the optimal counterions and discovered that NCIs determine their docking positions, which significantly affect the counterion-induced energetic disorder. With the optimal counterions, we successfully reduced the energetic disorder to levels even lower than that of the undoped polymer. As a result, we achieved a high n-doped electrical conductivity of over 200 S cm-1 and an eight-fold increase in the thermoelectric power factor. We found that the NCIs have substantial effects on doping efficiency, polymer backbone planarity, and Coulomb potential landscape. Our work not only provides a general strategy for identifying the most suitable counterions but also deepens our understanding of the counterion effects on doped polymeric semiconductors.

From Chemical Drawing to Electronic Properties of Semiconducting Polymers in Bulk: A Tool for Chemical Discovery

A quantum chemistry (QC)/molecular dynamics (MD) scheme is developed to calculate electronic properties of semiconducting polymers in three steps: (i) constructing the polymer force field through a unified workflow, (ii) equilibrating polymer models, and (iii) calculating electronic structure properties (e.g., density of states and localization length) from the equilibrated models by QC approaches. Notably, as the second step of this scheme is generally the most time-consuming one, we introduce an alternative method to compute thermally averaged electronic properties in bulk, based on the simulation of a polymer chain in the solution of its repeat units, which is shown to reproduce the microstructure of polymer chains and their electrostatic effect (successfully tested for five benchmark polymers) 10 times faster than state-of-the-art methods. In fact, this scheme offers a consistent and speedy way of estimating electronic properties of polymers from their chemical drawings, thus ensuring the availability of a homogeneous set of simulations to derive structure-property relationships and material design principles. As an example, we show how the electrostatic effect of the polymer chain environment can disturb the localized electronic states at the band tails and how this effect is more significant in the case of diketopyrrolopyrrole polymers as compared to indacenodithiophene and dithiopheneindenofluorene ones.

Microstructural Model of Indacenodithiophene-co-benzothiadiazole Polymer: π-Crossing Interactions and Their Potential Impact on Charge Transport

Morphological and electronic properties of indacenodithiophene-co-benzothiadiazole (IDTBT) copolymer with varying molecular weights are calculated through combined molecular dynamics (MD) and quantum chemical (QC) methods. Our study focuses on the polymer chain arrangements, interchain connectivity pathways, and interplay between morphological and electronic structure properties of IDTBT. Our models, which are verified against GIWAXS measurements, show a considerable number of BT-BT π-π interactions with a (preferential) perpendicular local orientation of polymer chains due to the steric hindrance of bulky side chains around IDT. Although our models predict a noncrystalline structure for IDTBT, the BT-BT (interchain) crossing points show a considerable degree of short-range order in spatial arrangement which most likely result in a mesh-like structure for the polymer and provide efficient pathways for interchain charge transport.

Computational Approaches for Organic Semiconductors: From Chemical and Physical Understanding to Predicting New Materials

While a complete understanding of organic semiconductor (OSC) design principles remains elusive, computational methods─ranging from techniques based in classical and quantum mechanics to more recent data-enabled models─can complement experimental observations and provide deep physicochemical insights into OSC structure-processing-property relationships, offering new capabilities for in silico OSC discovery and design. In this Review, we trace the evolution of these computational methods and their application to OSCs, beginning with early quantum-chemical methods to investigate resonance in benzene and building to recent machine-learning (ML) techniques and their application to ever more sophisticated OSC scientific and engineering challenges. Along the way, we highlight the limitations of the methods and how sophisticated physical and mathematical frameworks have been created to overcome those limitations. We illustrate applications of these methods to a range of specific challenges in OSCs derived from π-conjugated polymers and molecules, including predicting charge-carrier transport, modeling chain conformations and bulk morphology, estimating thermomechanical properties, and describing phonons and thermal transport, to name a few. Through these examples, we demonstrate how advances in computational methods accelerate the deployment of OSCsin wide-ranging technologies, such as organic photovoltaics (OPVs), organic light-emitting diodes (OLEDs), organic thermoelectrics, organic batteries, and organic (bio)sensors. We conclude by providing an outlook for the future development of computational techniques to discover and assess the properties of high-performing OSCs with greater accuracy.

Screening semiconducting polymers to discover design principles for tuning charge carrier mobility

We employ a rapid method for computing the electronic structure and orbital localization characteristics for a sample of 36 different polymer backbone structures. This relatively large sample derived from recent literature is used to identify the features of the monomer sequence that lead to greater charge delocalization and, potentially, greater charge mobility. Two characteristics contributing in equal measure to large localization length are the reduced variation of the coupling between adjacent monomers due to conformational fluctuations and the presence of just two monomers in the structural repeating units. For such polymers a greater mismatch between the HOMO orbitals of the fragments and, surprisingly, a smaller coupling between them is shown to favour greater delocalization of the orbitals. The underlying physical reasons for such observations are discussed and explicit and constructive design rules are proposed.

Gaining control over conjugated polymer morphology to improve the performance of organic electronics

Conjugated polymers (CPs) are widely used in various domains of organic electronics. However, the performance of organic electronic devices can be variable due to the lack of precise predictive control over the polymer microstructure. While the chemical structure of CPs is important, CP microstructure also plays an important role in determining the charge-transport, optical and mechanical properties suitable for a target device. Understanding the interplay between CP microstructure and the resulting properties, as well as predicting and targeting specific polymer morphologies, would allow current comprehension of organic electronic device performance to be improved and potentially enable more facile device optimization and fabrication. In this Feature Article, we highlight the importance of investigating CP microstructure, discuss previous developments in the field, and provide an overview of the key aspects of the CP microstructure-property relationship, carried out in our group over recent years.

Development of hybrid coarse-grained atomistic models for rapid assessment of local structuring of polymeric semiconductors

Decades of work in the field of computational study of semiconducting polymers using atomistic models illustrate the challenges of generating equilibrated models for this class of materials. While adopting a coarse-grained model can be helpful, the process of developing a suitable model is particularly non-trivial and time-consuming for semiconducting polymers due to a large number of different interactions with some having an anisotropic nature. This work introduces a procedure for the rapid generation of a hybrid model for semiconducting polymers where atoms of secondary importance (those in the alkyl side chains) are transformed into coarse-grained beads to reduce the computational cost of generating an equilibrated structure. The parameters are determined from easy-to-equilibrate simulations of very short oligomers and the model is constructed to enable a very simple back-mapping procedure to reconstruct geometries with atomistic resolution. The model is illustrated for three related polymers containing DPP (diketopyrrolopyrrole) to evaluate the transferability of the potential across different families of polymers. The accuracy of the model, determined by comparison with the results of fully equilibrated simulations of the same material before and after back-mapping, is fully satisfactory for two out of the three cases considered. We noticed that accuracy can be determined very early in the workflow so that it is easy to assess when the deployment of this method is advantageous. The hybrid representation can be used to evaluate directly the electronic properties of structures sampled by the simulations.

Local structuring of diketopyrrolopyrrole (DPP)-based oligomers from molecular dynamics simulations

The microscopic structure of high mobility semiconducting polymers is known to be essential for their performance but it cannot be easily deduced from the available experimental data. A series of short oligomers of diketopyrrolopyrrole (DPP)-based materials that display high charge mobility are studied by molecular dynamics simulations to understand their local structuring at an atomic level. Different analyses are proposed to compare the ability of different oligomers to form large aggregates and their driving force. The simulations show that the tendency for this class of materials to form aggregates is driven by the interaction between DPP fragments, but this is modulated by the other conjugated fragments of the materials which affect the rigidity of the polymer and, ultimately, the size of the aggregates that are formed. The main structural features and the electronic structure of the oligomers are fairly similar above the glass transition temperature and at room temperature.

Rapid Method for Calculating the Conformationally Averaged Electronic Structure of Conjugated Polymers

We developed a rapid method to calculate the average electronic structure properties of large ensembles of conjugated polymer chains sampling their conformational space. This is achieved by using the localized molecular orbital (MO) method to rapidly compute the MOs and their energies for isolated polymer chains and through using a calibration scheme to further correct the obtained energies by comparison with a few accurate calculations. The method is applied to the study of the density of states and orbital localization characteristics for five polymers. It is shown that all key properties of the individual chain related to the charge mobility can be rationalized in terms of the properties of the constituent monomers, their interaction, and the conformational flexibility of the chain. More specifically we identify the features that lead to greater charge delocalization. Finally, we discuss the prospect of using this method for a computational high-throughput screening of conjugated polymers.

Solvent influence on molecular interactions in the bulk of fluorene copolymer films

The effect of intermolecular interactions between the chains of the amorphous PFO–MEH-PPV films built from toluene and tetrahydrofuran (THF) were studied by atomistic molecular dynamics simulations, applying a successive solvent removal procedure. In the good solvent toluene, the incidence of topological entanglements is more significant. While in the poor solvent, coplanar interactions between neighbouring segments of the chains were also found, which is characteristics of cohesional entanglements. Structure factor curves of the films showed three peaks associated with the microstructure of the film, as previously reported by WAX diffractogram measurements. Moreover, the good solvent promotes more flexibility in dihedral angles, and the chains become nearer to each other.

The effect of intermolecular interactions between the chains of the amorphous PFO–MEH-PPV films built from toluene and tetrahydrofuran (THF) were studied by atomistic molecular dynamics simulations, applying a successive solvent removal procedure.

Relation between Local Structure, Electric Dipole, and Charge Carrier Dynamics in DHICA Melanin: A Model for Biocompatible Semiconductors

Eumelanins are a family of natural and synthetic pigments obtained by oxidative polymerization of their natural precursors: 5,6-dihydroxyindole and its 2-carboxy derivative (DHICA). The simultaneous presence of ionic and electronic charge carriers makes these pigments promising materials for applications in bioelectronics. In this computational study we build a structural model of DHICA melanin considering the interplay between its many degrees of freedom, and then we examine the electronic structure of representative oligomers. We find that a nonvanishing dipole along the polymer chain sets this system apart from conventional polymer semiconductors, determining its electronic structure, reactivity toward oxidation and localization of the charge carriers. Our work sheds light on previously unnoticed features of DHICA melanin that not only fit well with its radical scavenging and photoprotective properties but also open new perspectives toward understanding and tuning charge transport in this class of materials.

Unexpectedly Large Couplings Between Orthogonal Units in Anthraquinone Polymers

The unusual electronic properties of directly linked 1,4-polyanthraquinones (14PAQs) are investigated. The dihedral angle between the molecular planes of anthraquinones (AQs) is found to be close to 90°. Contrary to the prevailing notion that the interaction between orthogonal units is negligible due to broken π-electron conjugation, the coupling between neighboring AQ units does not have a minimum at 90° and is much larger than that expected. The unexpectedly large electronic coupling between orthogonal AQ units is explained by the interaction between the lone pairs of the carbonyl oxygen and the π system of the neighboring unit, which allows favorable overlap between frontier molecular orbitals at the orthogonal geometry. It is shown that this effect, which is described computationally for the first time, can be strengthened by adding more quinone units. The effect of thermal fluctuations on the couplings is assessed through ab initio molecular dynamics simulations. The distributions of the couplings reveal that electron transport is resilient to dynamic disorder in all systems considered, whereas the hole couplings are much more sensitive to disorder. Lone pair-π interactions are described, as a previously largely overlooked conjugation mechanism, for incorporation into a new class of disorder-resilient semiconducting redox polymers.

A low molecular weight OLED material: 2-(4-((2-hydroxyethyl)(methyl)amino)benzylidene)malononitrile. Synthesis, crystal structure, thin film morphology, spectroscopic characterization and DFT calculations

2-(4-((2-Hydroxyethyl)(methyl)amino)benzylidene)malononitrile (HEMABM) was synthesized from 4-[hydroxymethyl(methyl)amino]benzaldehyde and propanedinitrile to obtain a low molecular weight fluorescent material with an efficient solid-state emission and electroluminescence properties comparable to the well-known poly(2-methoxy-5(2'-ethyl)hexoxyphenylenevinylene) (MEH-PPV). The HEMABM was used to prepare an organic light-emitting diode by a solution process. Despite the title compound being a small molecule, it showed optical properties and notable capacity to form a film with smooth morphology (10.81 nm) closer to that of polymer MEH-PPV (10.63 nm). The preparation of the device was by spin coating, the electrical properties such as threshold voltage were about 1.0 V for both HEMABM and MEH-PPV, and the luminance 1300 cd m-2 for HEMABM and 2600 cd m-2 for MEH-PPV. This low molecular weight compound was characterized by SCXRD, IR, NMR, and EI. Besides a quantitative analysis of the intermolecular interactions by PIXEL, density functional theory (DFT) calculations are reported.

Let Digons be Bygones: The Fate of Excitons in Curved π-Systems

We explore the diverse origins of unpolarized absorption and emission of molecular polygons consisting of π-conjugated oligomer chains held in a bent geometry by strain controlled at the vertex units. For this purpose, we make use of atomistic nonadiabatic excited-state molecular dynamics simulations of a bichromophore molecular polygon (digon) with bent chromophore chains. Both structural and photoexcited dynamics were found to affect polarization features. Bending strain induces exciton localization on individual chromophore units of the conjugated chains. The latter display different transition dipole moment orientations, a feature not present in the linear oligomer counterparts. In addition, bending makes exciton localization very sensitive to molecular distortions induced by thermal fluctuations. The excited-state dynamics reveals an ultrafast intramolecular energy redistribution that spreads the exciton equally among spatially separated chromophore fragments within the molecular system. As a result, digons become virtually unpolarized absorbers and emitters, in agreement with recent experimental studies on the single-molecule level.

Small Molecules Derived from Thieno[3,4-c]pyrrole-4,6-dione (TPD) and Their Use in Solution Processed Organic Solar Cells

In this work, microwave synthesis, chemical, optical and electrochemical characterization of three small organic molecules, TPA-TPD, TPA-PT-TPD and TPA-TT-TPD with donor-acceptor structure and their use in organic photovoltaic cells are reported. For the synthesis, 5-(2-ethylhexyl)-4H-thieno[3,4-c]pyrrole-4,6(5H)-dione was used as electron withdrawing fragment while the triphenylamine was used as electron donating fragment. Molecular electronic geometry and electronic distribution density were established by density functional theory (DFT) calculations and confirmed by optical and chemical characterization. These molecules were employed as electron-donors in the active layer for manufacturing bulk heterojunction organic solar cells, where [6,6]-phenyl C71 butyric acid methyl ester (PC71BM) was used as electron-acceptor. As cathode, Field's metal (FM), an eutectic alloy (Bi/In/Sn: 32.5%, 51%, and 16.5%, respectively) with a melting point above 62 °C, was easily deposited by drop casting under vacuum-free process and at air atmosphere. Prepared devices based on TPA-TPD:PC71BM (1:4 w/w ratio) presented a large VOC = 0.97 V, with JSC = 7.9 mA/cm², a FF = 0.34, then, a power conversion efficiency (PCE) of 2.6%.

The correspondence between the conformational and chromophoric properties of amorphous conjugated polymers in mesoscale condensed systems

For π-conjugated polymers, the notion of spectroscopic units or "chromophores" provides illuminating insights into the experimentally observed absorption/emission spectra and the mechanisms of energy/charge transfer. To date, however, no statistical analysis has revealed a direct correspondence between chromophoric and conformational properties-with the latter being fundamental to polymer semiconductors. Herein, we propose a "persistence length" calculation to re-evaluate chain conformation over a full conjugation length. The mesoscale condensed systems of MEH-PPV and MEH-PPV/C₆₀ hybrid (system size ∼10 × 10 × 10 nm³) are utilized as two prototypical model systems, along with a full range of segmental lengths (2-20-mer) and five lowest singlet excited states to hint at the generality of the features presented. We demonstrate, for the first time, that two properly re-defined conformational factors that characterize chain folding and planarity, respectively, capture excellently the population distribution of chromophores in both systems investigated. In contrast, the conventional strategy of utilizing two adjacent monomer units to characterize (local) chain conformation results in only an inconspicuous correlation between the two, as previously reported. It is further shown that chain folding-and not chain planarity-is more relevant in capturing the associated oscillator strength for the first excited state, where the transient dipole moments are known to align with the chain conformation, although the corresponding excitation energy and exciton size seem relatively unaffected. The observed effects of C₆₀ on the MEH-PPV adsorption spectra also agree with recent experimental trends. Overall, the present findings are expected to aid future multiscale computer simulations and spectroscopy-data interpretations for polymer semiconductors and their hybrid systems.

Relating Chromophoric and Structural Disorder in Conjugated Polymers

The optoelectronic properties of amorphous conjugated polymers are sensitive to the details of the conformational disorder, and spectroscopy provides the means for structural characterization of the fragments of the chain that interact with light-"chromophores". A faithful interpretation of spectroscopic conformational signatures, however, presents a theoretical challenge. Here we investigate the relationship between the ground-state optical gaps, the properties of the excited states, and the structural features of chromophores of a single molecule poly(3-hexyl)-thiophene (P3HT) using quantum-classical atomistic simulations. Our results demonstrate that chromophoric disorder arises through the interplay between excited-state delocalization and electron-hole polarization, controlled by the torsional disorder introduced by side chains. Within this conceptual framework, we predict and explain the counterintuitive spectral behavior of P3HT, a red-shifted absorption, despite shortening of chromophores, with increasing temperature. This discussion introduces the concept of disorder-induced separation of charges in amorphous conjugated polymers.

How Many Parameters Actually Affect the Mobility of Conjugated Polymers?

We describe charge transport along a polymer chain with a generic theoretical model depending in principle on tens of parameters, reflecting the chemistry of the material. The charge carrier states are obtained from a model Hamiltonian that incorporates different types of disorder and electronic structure (e.g., the difference between homo- and copolymer). The hopping rate between these states is described with a general rate expression, which contains the rates most used in the literature as special cases. We demonstrate that the steady state charge mobility in the limit of low charge density and low field ultimately depends on only two parameters: an effective structural disorder and an effective electron-phonon coupling, weighted by the size of the monomer. The results support the experimental observation [N. I. Craciun, J. Wildeman, and P. W. M. Blom, Phys. Rev. Lett. 100, 056601 (2008)PRLTAO0031-900710.1103/PhysRevLett.100.056601] that the mobility in a broad range of (polymeric) semiconductors follows a universal behavior, insensitive to the chemical detail.

Simulating charge transport in organic semiconductors and devices: a review

Charge transport simulation can be a valuable tool to better understand, optimise and design organic transistors (OTFTs), photovoltaics (OPVs), and light-emitting diodes (OLEDs). This review presents an overview of common charge transport and device models; namely drift-diffusion, master equation, mesoscale kinetic Monte Carlo and quantum chemical Monte Carlo, and a discussion of the relative merits of each. This is followed by a review of the application of these models as applied to charge transport in organic semiconductors and devices, highlighting in particular the insights made possible by modelling. The review concludes with an outlook for charge transport modelling in organic electronics.

Role of Near Substrate and Bulk Polymer Morphology on Out-of-Plane Space-Charge Limited Hole Mobility

Charge transport is a central issue in all types of organic electronic devices. In organic films, charge transport is crucially limited by film microstructure and the nature of the substrate/organic interface interactions. In this report, we discuss the influence of active layer thickness on space-charge limited hole transport in pristine polymer and polymer/fullerene bulk heterojunction thin films (∼15-300 nm) in a diode structure. According to the results, the out-of-plane hole mobility in pristine polymers is sensitive to the degree of polymer chain aggregation. Blending the polymers with a fullerene molecule does not change the trend of hole mobility if the polymer tends to make an amorphous structure. However, employing an aggregating polymer in a bulk heterojunction blend gives rise to a marked difference in charge carrier transport behavior compared to the pristine polymer and this difference is sensitive to active layer thickness. In aggregating polymer films, the thickness-dependent interchain interaction was found to have direct impact on hole mobility. The thickness-dependent mobility trend was found to correspond well with the trend of fill factors of corresponding bulk heterojunction solar cells. This investigation has a vital implication for material design and the development of efficient organic electronic devices, including solar cells and light-emitting diodes.

Very Large π-Conjugation Despite Strong Nonplanarity: A Path for Designing New Semiconducting Polymers

When two π-conjugated fragments are connected by a bond between two sp² carbon atoms, a torsion around this bond is expected to break the overall π-conjugation. We show that for specially selected monomers, the π-conjugation is insensitive to torsions around a C-C bond up to about 60°. We provide a number of examples for this very unexpected phenomenon and a simple explanation. We propose that this feature can be incorporated into conjugated polymers to generate semiconducting materials that are extremely insensitive to structural disorder.

A Comprehensive study of the Effects of Chain Morphology on the Transport Properties of Amorphous Polymer Films

Organic semiconductors constitute one of the main components underlying present-day paradigm shifting optoelectronic applications. Among them, polymer based semiconductors are deemed particularly favorable due to their natural compatibility with low-cost device fabrication techniques. In light of recent advances in the syntheses of these classes of materials, yielding systems exhibiting charge mobilities comparable with those found in organic crystals, a comprehensive study of their charge transport properties is presented. Among a plethora of effects arising from these systems morphological and non morphological attributes, it is shown that a favorable presence of several of these attributes, including that of rapid on-chain carrier propagation and the presence of elongated conjugation segments, can lead to an enhancement of the system's mobility by more than 5 orders of magnitude with respect to 'standard' amorphous organic semiconductors. New insight for the formulation of new engineering strategies for next generation polymer based semiconductors is thus gathered.

Functionalization-induced changes in the structural and physical properties of amorphous polyaniline: a first-principles and molecular dynamics study

In this paper, we present a first-principles and molecular dynamics study to delineate the functionalization-induced changes in the local structure and the physical properties of amorphous polyaniline. The results of radial distribution function (RDF) demonstrate that introducing -SO3(-)Na(+) groups at phenyl rings leads to the structural changes in both the intrachain and interchain ordering of polyaniline at shorter distances (≤5 Å). An unique RDF feature in 1.8-2.1 Å regions is usually observed in both the interchain and intrachain RDF profiles of the -SO3(-)Na(+) substituted polymer (i.e. Na-SPANI). Comparative studies of the atom-atom pairs, bond structures, torsion angles and three-dimensional structures show that EB-PANI has much better intrachain ordering than that of Na-SPANI. In addition, investigation of the band gap, density of states (DOS), and absorption spectra indicates that the derivatization at ring do not substantially alter the inherent electronic properties but greatly change the optical properties of polyaniline. Furthermore, the computed diffusion coefficient of water in Na-SPANI is smaller than that of EB-PANI. On the other hand, the Na-SPANI shows a larger density than that of EB-PANI. The computed RDF profiles, band gaps, absorption spectra, and diffusion coefficients are in quantitative agreement with the experimental data.

Charge mobility induced by Brownian fluctuations in π-conjugated polymers in solution

We study the motion of a doped charge in a π-conjugated polymer chain in solution subject to Brownian fluctuations. Specifically, we take poly(para-phenylene) to be our model system where the Brownian fluctuations cause rotational motion of the phenylene rings. The instantaneous torsional fluctuations cause Anderson localization of the charge wavefunction, with the lower-energy spectrum being composed of local ground states and the higher-energy spectrum being composed of quasi-extended states. At low temperatures, additional charge localization occurs via torsional relaxation. The dynamical torsional fluctuations lead to two distinct modes of motion of the charge: adiabatic and non-adiabatic. Adiabatic motion is a 'crawling' motion of the charge along the polymer chain while the charge remains in its local ground state. Non-adiabatic motion is a rapid 'hopping' motion as the charge is excited into higher energy quasi-extended states and travels ballistically along the chain before relaxing into a local ground state. The adiabatic motion dominates at low temperatures, and exhibits a linear temperature dependence and thus a constant zero-field charge mobility. Non-adiabatic motion begins to dominate as the temperature is increased, as the charge is thermally excited into higher energy states. At high temperatures the diffusion constant becomes almost temperature independent, indicating a decrease in the charge mobility with increasing temperature, which we attribute to the charge localization length being a decreasing function of temperature at high temperatures.

Elucidating the enhancement in optical properties of low band gap polymers by tuning the structure of alkyl side chains

We carry out a computational study of optical properties of two novel 5,6-difluorobenzo[c][1,2,5]-thiadiazole-based polymers, PFBT-T20TT and PFBT-T12TT, to elucidate the surprisingly superior performance of polymer solar cells based on the former, when it differs from the latter only in the alkyl side chains. Density Functional Theory (DFT) based geometry optimization at the B3LYP/6-31G(d) level reveals differences in internal coordinates, which are important in tuning the electronic and optical properties. We further calculate the electronic structure at room temperature by employing molecular dynamics (MD) simulations in combination with DFT techniques. The energies of the highest occupied molecular orbital (HOMO) are found to be in reasonable agreement with the available experimental data and the HOMO-lowest unoccupied MO energy gap is found to be similar for both the molecules. The electronic density of the HOMO in PFBT-T20TT is, however, found to be significantly more delocalized along the backbone, which is proposed to be conducive for the formation of charge separated states leading to an improved device performance. Furthermore, via fitting the absorption spectra calculated with the multi-mode Brownian Oscillator model, we have also extracted a weaker exciton-phonon coupling parameter in PFBT-T20TT, consistent with the trends revealed via the DFT-MD results.

Developing accurate molecular mechanics force fields for conjugated molecular systems

A rapid method to parameterize the intramolecular component of classical force fields is proposed and applied to a molecular semiconductor, oligomers of conjugated polymers and a biological chromophore.

Multi-length-scale relationships between the polymer molecular structure and charge transport: the case of poly-naphthalene diimide bithiophene

Charge transport in organic polymer semiconductors is a complex phenomenon affected by structural and electronic properties ranging over different length scales, from the molecular one up to the macro-scale.

Narrower bands with better charge transport: the counterintuitive behavior of semiconducting copolymers

The narrower bands formed by donor-acceptor polymers are not detrimental to transport, as the reduced electronic coupling along the chain is more than compensated by a reduced activation energy for transport. These polymers are less sensitive to the conformational disorder of the chain as long as the bandwidth is larger than a threshold.

Anisotropic Photophysical Properties of Highly Aligned Crystalline Structures of a Bulky Substituted Poly(thiophene)

The photophysical properties of a phenyl-substituted poly(thiophene), poly(3-(2,5-dioctylphenyl)thiophene) (PDOPT), were studied as a function of polarization and degree of orientation of the crystalline structure. Under well-chosen controlled conditions, large-sized spherulitic crystals of PDOPT were successfully prepared from the melt. From polarized optical microscopy and X-ray diffraction, the molecular orientation of PDOPT within the spherulite was determined, indicating that the fastest growth direction of the spherulite was the a-axis. This implied that crystallization of PDOPT was directed by the packing of the side chains rather than the backbones, which are significantly separated. As the crystalline lamellae were all radially oriented, the local absorbance strongly depended on the polarization of the incoming light. Compared to randomly oriented crystals in a quenched and thus rapidly crystallized sample, PDOPT spherulites displayed red-shifted absorption and emission spectra, combined with a reduced photoluminescence quantum yield. Even for these markedly separated polymer backbones (1.47 nm), the reduced photoluminescence suggests an enhancement of interchain interactions of highly ordered bulky substituted polythiophene induced by crystallization.

Charge Diffusion in Semiconducting Polymers: Analytical Relation between Polymer Rigidity and Time Scales for Intrachain and Interchain Hopping

We study the charge diffusion of semiconducting polymer bulk using simplified coarse grained models to investigate the relation between charge diffusion coefficient and the characteristics time of intrachain and interchain hopping, τ1 and τ2. We consider the process of charge diffusion in several standard models of polymer chains (rigid chain, Gaussian chain, worm-like chain), and we achieve an analytical expression for the diffusion coefficient in terms of the characteristic times and the geometric parameters defining the chain models. The diffusion depends only on the intrachain hopping for the rigid chain and on the geometric average of intrachain and interchain hopping times for the Gaussian chain (the least rigid model), with an analytical interpolation available between two limits. The model highlights the importance of large persistence lengths for improved transport properties. In all cases, it is incorrect to consider the slower interchain hopping as the rate-determining step for the charge transport.

Influence of Molecular Conformations and Microstructure on the Optoelectronic Properties of Conjugated Polymers

It is increasingly obvious that the molecular conformations and the long-range arrangement that conjugated polymers can adopt under various experimental conditions in bulk, solutions or thin films, significantly impact their resulting optoelectronic properties. As a consequence, the functionalities and efficiencies of resulting organic devices, such as field-effect transistors, light-emitting diodes, or photovoltaic cells, also dramatically change due to the close structure/property relationship. A range of structure/optoelectronic properties relationships have been investigated over the last few years using various experimental and theoretical methods, and, further, interesting correlations are continuously revealed by the scientific community. In this review, we discuss the latest findings related to the structure/optoelectronic properties interrelationships that exist in organic devices fabricated with conjugated polymers in terms of charge mobility, absorption, photoluminescence, as well as photovoltaic properties.

Appearance of perfect amorphous linear bulk polyethylene under applied electric field and the analysis by radial distribution function and direct tunneling effect

Without melting flow, linear ultrahigh molecular weight polyethylene (UHMWPE) provided X-ray intensity curve from only amorphous halo at 129.0 °C (surface temperature, Ts arisen by Joule heat) lower than the conventionally known melting point 145.5 °C on applying electric field to UHMWPE-nickel-coated carbon fiber (NiCF) composite. Such surprising phenomenon was analyzed by simultaneous measurements of X-ray intensity, electric current, and Ts as a function of time. The calculated radial distribution function revealed the amorphous structure with disordered chain arrangement. The appearance of such amorphous phase was arisen by the phenomenon that the transferring electrons between overlapped adjacent NiCFs by tunneling effect struck together with X-ray photons and some of the transferring electron flown out from the gap to UHMWPE matrix collided against carbon atoms of UHMWPE. The impact by the collision caused disordering chain arrangement in crystal grains.

Electrospun Polymer Fibers for Electronic Applications

Nano- and micro- fibers of conjugated polymer semiconductors are particularly interesting both for applications and for fundamental research. They allow an investigation into how electronic properties are influenced by size confinement and chain orientation within microstructures that are not readily accessible within thin films. Moreover, they open the way to many applications in organic electronics, optoelectronics and sensing. Electro-spinning, the technique subject of this review, is a simple method to effectively form and control conjugated polymer fibers. We provide the basics of the technique and its recent advancements for the formation of highly conducting and high mobility polymer fibers towards their adoption in electronic applications.

Increased elasticity of a low-bandgap conjugated copolymer by random segmentation for mechanically robust solar cells

Random segmentation of unlike conjugated monomers within a low-bandgap polymer produces increased mechanical compliance without sacrificing photovoltaic performance.

Chain conformations dictate multiscale charge transport phenomena in disordered semiconducting polymers

Existing models for the electronic properties of conjugated polymers do not capture the spatial arrangement of the disordered macromolecular chains over which charge transport occurs. Here, we present an analytical and computational description in which the morphology of individual polymer chains is dictated by well-known statistical models and the electronic coupling between units is determined using Marcus theory. The multiscale transport of charges in these materials (high mobility at short length scales, low mobility at long length scales) is naturally described with our framework. Additionally, the dependence of mobility with electric field and temperature is explained in terms of conformational variability and spatial correlation. Our model offers a predictive approach to connecting processing conditions with transport behavior.