Plant biomass recalcitrance: effect of hemicellulose composition on nanoscale forces that control cell wall strength

Characterization of Decellularized Plant Leaf as an Emerging Biomaterial Platform

Decellularized plants have emerged as promising biomaterials for cell culture and tissue engineering applications due to their distinct material characteristics. This study explores the biochemical, mechanical, and structural properties of decellularized leaves that make them useful as biomaterials for cell culture. Five monocot leaf species were decellularized via alkali treatment, resulting in the effective removal of DNA and proteins. The Van Soest method was used to quantitatively evaluate the changes in cellulose, hemicellulose, and lignin content during decellularization. Tensile tests revealed considerable variations in mechanical strength depending on the plant species, the decellularization state, and the direction of applied mechanical force. Decellularized monocot leaves exhibited a notable reduction in mechanical strength and anisotropic properties depending on the leaf orientation. Imaging revealed inherent microgrooves on the epidermis of the monocot leaves. Permeability studies, including water uptake and biomolecule transport through decellularized leaves, confirmed excellent water uptake capability but limited biomolecule transport. Lastly, the plants were enzymatically degradable using typical plant enzymes, which were minimally cytotoxic to mammalian cells. Taken together, the features of decellularized plant leaves characterized in this study suggest ways in which they can be useful in cell culture and tissue engineering applications.

Coarse-grained molecular dynamics model to evaluate the mechanical properties of bacterial cellulose-hemicellulose composites

The plant cell wall (PCW) inspires the preparation of fiber-based biomaterials, particularly emphasizing exploiting the intrinsic interactions within the load-bearing cellulose and hemicellulose network. Due to experimental difficulties in studying and interpreting the interaction between these polysaccharides, this research presents a numerical model based on coarse-grained molecular dynamics that evaluates the mechanical properties of fiber composites. To validate the model and explain the structural and mechanical role of hemicelluloses, bacterial cellulose (BC) was synthesized in the presence of different concentrations of xylan, arabinoxylan, xyloglucan, or glucomannan and subjected to nano- and macroscale structural and mechanical characterization. The data obtained were used to interpret the effects of each hemicellulose on the mechanics of the BC-hemicellulose composite based on the sensitivity of the model. The mechanical properties of the resulting simulated networks agreed well with the experimental observations of the BC-hemicellulose composites. Increased xylan and arabinoxylan contents increased the macroscale mechanical properties, fiber modulus (xylan), and fiber width (arabinoxylan). The addition of xyloglucan increased the mechanical properties of the composites in the elastic deformation phase, associated with an increase in the fiber modulus. Adding glucomannan to the culture medium decreased all the mechanical properties studied while the fiber width increased.

Decrypting Molecular Mechanisms Involved in Counteracting Copper and Nickel Toxicity in Jack Pine (Pinus banksiana) Based on Transcriptomic Analysis

The remediation of copper and nickel-afflicted sites is challenged by the different physiological effects imposed by each metal on a given plant system. Pinus banksiana is resilient against copper and nickel, providing an opportunity to build a valuable resource to investigate the responding gene expression toward each metal. The objectives of this study were to (1) extend the analysis of the Pinus banksiana transcriptome exposed to nickel and copper, (2) assess the differential gene expression in nickel-resistant compared to copper-resistant genotypes, and (3) identify mechanisms specific to each metal. The Illumina platform was used to sequence RNA that was extracted from seedlings treated with each of the metals. There were 449 differentially expressed genes (DEGs) between copper-resistant genotypes (RGs) and nickel-resistant genotypes (RGs) at a high stringency cut-off, indicating a distinct pattern of gene expression toward each metal. For biological processes, 19.8% of DEGs were associated with the DNA metabolic process, followed by the response to stress (13.15%) and the response to chemicals (8.59%). For metabolic function, 27.9% of DEGs were associated with nuclease activity, followed by nucleotide binding (27.64%) and kinase activity (10.16%). Overall, 21.49% of DEGs were localized to the plasma membrane, followed by the cytosol (16.26%) and chloroplast (12.43%). Annotation of the top upregulated genes in copper RG compared to nickel RG identified genes and mechanisms that were specific to copper and not to nickel. NtPDR, AtHIPP10, and YSL1 were identified as genes associated with copper resistance. Various genes related to cell wall metabolism were identified, and they included genes encoding for HCT, CslE6, MPG, and polygalacturonase. Annotation of the top downregulated genes in copper RG compared to nickel RG revealed genes and mechanisms that were specific to nickel and not copper. Various regulatory and signaling-related genes associated with the stress response were identified. They included UGT, TIFY, ACC, dirigent protein, peroxidase, and glyoxyalase I. Additional research is needed to determine the specific functions of signaling and stress response mechanisms in nickel-resistant plants.

Mechanical strength changes of combustible municipal solid waste components during their early pyrolysis stage and mechanism analysis

Implementation of municipal solid waste (MSW) source segregation leads to a more convenient recycle of combustible MSW components. Textiles, plastics and papers are commonly available combustible components in MSW. Their shredding is conducive to resources recovery. But these components usually have high tensile strengths and are difficult to shred. To understand their mechanical strength changes in their early pyrolysis stage will help to address this problem. In this study, a universal electronic testing machine was used to determine the breaking strengths of the materials including cotton towel, polyethylene glycol terephthalate (PET), ivory board (IB), kraft paper (KP) and wool scarf in the temperature range of 30-250°C under N2 atmosphere, and the mechanisms of their strength changes were explored. The reaction force field molecular dynamics (ReaxFF-MD) simulation was used to explain the decomposition behaviours of different sugar groups of hemicellulose in cotton and paper and the change of van der Waals energy of wool during their early pyrolysis stages. The results showed that breaking strengths of all the combustible MSW components reduced as the temperature increased. The breaking strength of PET was found to have the highest descent rate with increasing temperature, then the descent rates of wool and cotton came as the second and third, respectively. Compared with cotton, the breaking strengths of KP and IB decreased more slowly. As the temperature increased, the breaking strength of cotton reduced mainly due to the decomposition of the glucuronic acid in hemicellulose, and the reduction was characterized by CO2 release. The breaking strength reduction of PET was caused by its molecular chain being relaxed. The breaking strength reduction of wool was firstly caused by the decrease in the van der Waals energy between its molecules, and then caused by molecular chain breaking. In addition, in order to understand the influence of material size on the breaking strength change during thermal treatment, the breaking strengths of cotton yarn bundles were correlated with their yarn number and temperature. This study lays the foundation for understanding changes in mechanical strengths of combustible MSW components during their early pyrolysis stage.

High potential for biomass-degrading CAZymes revealed by pine forest soil metagenomics

The undisturbed environment in Netarhat, with its high levels of accumulated lignocellulosic biomass, presents an opportunity to identify microbes for biomass digestion. This study focuses on the bioprospecting of native soil microbes from the Netarhat forest in Jharkhand, India, with the potential for lignocellulosic substrate digestion. These biocatalysts could help overcome the bottleneck of biomass saccharification and reduce the overall cost of biofuel production, replacing harmful fossil fuels. The study used metagenomic analysis of pine forest soil via whole genome shotgun sequencing, revealing that most of the reads matched with the bacterial species, very low percentage of reads (0.1%) belongs to fungal species, with 13% of unclassified reads. Actinobacteria were found to be predominant among the bacterial species. MetaErg annotation identified 11,830 protein family genes and 2 metabolic marker genes in the soil samples. Based on the Carbohydrate Active EnZyme (CAZy) database, 3,996 carbohydrate enzyme families were identified, with family Glycosyl hydrolase (GH) dominating with 1,704 genes. Most observed GH families in the study were GH0, 3, 5, 6. 9, 12. 13, 15, 16, 39, 43, 57, and 97. Modelling analysis of a representative GH 43 gene suggested a strong affinity for cellulose than xylan. This study highlights the lignocellulosic digestion potential of the native microfauna of the lesser-known pine forest of Netarhat.Communicated by Ramaswamy H. Sarma.

Facile production of cellulose nanofibers from raw elephant grass by an aluminum chloride-enhanced acidic deep eutectic solvent

To develop a greener and more efficient method for producing cellulose nanofibers (CNFs) from raw plants, an AlCl3-enhanced ternary deep eutectic solvent, DES2 (consisting of choline chloride, citric acid, and AlCl3·6H2O in a molar ratio of 1:0.4:0.08), was synthesized. Raw elephant grass (EG) was pretreated with DES2, followed by sodium chlorite (NaClO2) bleaching and ultrasonic disruption to extract high-performance CNFs. The DES2 and NaClO2 treatments effectively removed hemicellulose and lignin, achieving removal rates of 99.23 % and 99.62 %, respectively, while maintaining a cellulose content of 78.3 %. DES2 demonstrated easy recyclability and maintained excellent biomass pretreatment performance even after multiple cycles. Following a brief 30-min intermittent ultrasound treatment, the resulting CNFs demonstrated superior crystallinity, increased carboxyl content, and a narrower width distribution compared to CNFs obtained from AlCl3-free DES1. Optimized conditions at 110 °C yielded CNFs with 85.3 % crystallinity, 0.64 mmol/g carboxyl content, 5.15 nm width distribution, and excellent dispersion in water for at least six months. Additionally, CNFs enhanced the tensile strength of chia seed mucilage (CM) composite films, showing a significant improvement to 26.6 MPa, representing a 231.3 % increase over the control film. This study offers a promising approach for efficiently producing CNFs from raw plants.

Field testing of transgenic aspen from large greenhouse screening identifies unexpected winners

Trees constitute promising renewable feedstocks for biorefinery using biochemical conversion, but their recalcitrance restricts their attractiveness for the industry. To obtain trees with reduced recalcitrance, large-scale genetic engineering experiments were performed in hybrid aspen blindly targeting genes expressed during wood formation and 32 lines representing seven constructs were selected for characterization in the field. Here we report phenotypes of five-year old trees considering 49 traits related to growth and wood properties. The best performing construct considering growth and glucose yield in saccharification with acid pretreatment had suppressed expression of the gene encoding an uncharacterized 2-oxoglutarate-dependent dioxygenase (2OGD). It showed minor changes in wood chemistry but increased nanoporosity and glucose conversion. Suppressed levels of SUCROSE SYNTHASE, (SuSy), CINNAMATE 4-HYDROXYLASE (C4H) and increased levels of GTPase activating protein for ADP-ribosylation factor ZAC led to significant growth reductions and anatomical abnormalities. However, C4H and SuSy constructs greatly improved glucose yields in saccharification without and with pretreatment, respectively. Traits associated with high glucose yields were different for saccharification with and without pretreatment. While carbohydrates, phenolics and tension wood contents positively impacted the yields without pretreatment and growth, lignin content and S/G ratio were negative factors, the yields with pretreatment positively correlated with S lignin and negatively with carbohydrate contents. The genotypes with high glucose yields had increased nanoporosity and mGlcA/Xyl ratio, and some had shorter polymers extractable with subcritical water compared to wild-type. The pilot-scale industrial-like pretreatment of best-performing 2OGD construct confirmed its superior sugar yields, supporting our strategy.

Role and importance of solvents for the fractionation of lignocellulosic biomass

Lignocellulosic biomass is one of the most important renewable materials to replace carbon-based fossil resources. Solvent-based fractionation is a promising route for fractionation of biomass into its major components. Processing is governed by the employed solvent-systems properties. This review sheds light on the factors governing both dissolution and potential reactivities of the chemical structures present in lignocellulose, highlighting how proper understanding of the underlying mechanisms and interactions between solute and solvent help to choose proper systems for specific fractionation needs. Structural and chemical differences between the carbohydrate-based structural polymers and lignin require very different solvents capabilities in terms of causing and eventually stabilizing conformational changes and consequent activation of bonds to be cleaved by other active components in the. A consideration of potential depolymerization events during dissolution and energetic aspects of the dissolution process considering the contribution of polymer functionalities allow for a mapping of solvent suitability for biomass fractionation.

Combined physiological and metabolomic analysis reveals the effects of different biostimulants on maize production and reproduction

Plant biostimulants (PBs) are a potential strategy to improve crop growth and grain quality. In the present study, 100 mg/L trehalose, chitosan, humic acid and gamma-aminobutyric acid treatments were applied to analyze the effects of maize production and reproductive characteristics. The contents of nitrogen, phosphorus and potassium and grain quality were significantly affected by the PBs, but not yield. The seed germination rate of all PB treatments was significantly reduced, but the drought resistance of progeny seedlings was significantly improved, with humic acid having the strongest effect. Liquid chromatography mass spectrometry analysis indicated that the disruption of the tricarboxylic acid cycle, probably due to the blockage of intermediate anabolism, reduced the supply of energy and nutrients in the early stages of germination, thus inhibiting seed germination, while the increased resistance of the offspring seedlings may be due to the up-regulation of the synthesis of unsaturated fatty acids and alkaloids by humic acid treatment. This study revealed the similarity and heterogeneity of the effects of different PBs on nutrient accumulation, yield characteristics and grain quality of maize, providing guidance for the application of PBs in intensive and sustainable agricultural production.

Robust Bioinspired MXene-Hemicellulose Composite Films with Excellent Electrical Conductivity for Multifunctional Electrode Applications

MXene-based structural materials with high mechanical robustness and excellent electrical conductivity are highly desirable for multifunctional applications. The incorporation of macromolecular polymers has been verified to be beneficial to alleviate the mechanical brittleness of pristine MXene films. However, the intercalation of a large amount of insulating macromolecules inevitably compromises their electrical conductivity. Inspired by wood, short-chained hemicellulose (xylo-oligosaccharide) acts as a molecular binder to bind adjacent MXene nanosheets together; this work shows that this can significantly enhance the mechanical properties without introducing a large number of insulating phases. As a result, MXene-hemicellulose films can integrate a high electrical conductivity (64,300 S m-1) and a high mechanical strength (125 MPa) simultaneously, making them capable of being high-performance electrode materials for supercapacitors and humidity sensors. This work proposes an alternative method to manufacture robust MXene-based structural materials for multifunctional applications.

Biological Approaches for Extraction of Bioactive Compounds From Agro-industrial By-products: A Review

Bioactive compounds can provide health benefits beyond the nutritional value and are originally present or added to food matrices. However, because they are part of the food matrices, most bioactive compounds remain in agroindustrial by-products. Agro-industrial by-products are generated in large quantities throughout the food production chain and can—when not properly treated—affect the environment, the profit, and the proper and nutritional distribution of food to people. Thus, it is important to adopt processes that increase the use of these agroindustrial by-products, including biological approaches, which can enhance the extraction and obtention of bioactive compounds, which enables their application in food and pharmaceutical industries. Biological processes have several advantages compared to nonbiological processes, including the provision of extracts with high quality and bioactivity, as well as extracts that present low toxicity and environmental impact. Among biological approaches, extraction from enzymes and fermentation stand out as tools for obtaining bioactive compounds from various agro-industrial wastes. In this sense, this article provides an overview of the main bioactive components found in agroindustrial by-products and the biological strategies for their extraction. We also provide information to enhance the use of these bioactive compounds, especially for the food and pharmaceutical industries.

Physico-chemical interactions within lignocellulosic biomass and their importance in developing solvent based deconstruction methods

Fundamental understanding of physico-chemical interactions among the biopolymers in lignocellulosic biomass is crucial to develop atom-efficient deconstruction methods.

Deconstruction and Reassembly of Renewable Polymers and Biocolloids into Next Generation Structured Materials

This review considers the most recent developments in supramolecular and supraparticle structures obtained from natural, renewable biopolymers as well as their disassembly and reassembly into engineered materials. We introduce the main interactions that control bottom-up synthesis and top-down design at different length scales, highlighting the promise of natural biopolymers and associated building blocks. The latter have become main actors in the recent surge of the scientific and patent literature related to the subject. Such developments make prominent use of multicomponent and hierarchical polymeric assemblies and structures that contain polysaccharides (cellulose, chitin, and others), polyphenols (lignins, tannins), and proteins (soy, whey, silk, and other proteins). We offer a comprehensive discussion about the interactions that exist in their native architectures (including multicomponent and composite forms), the chemical modification of polysaccharides and their deconstruction into high axial aspect nanofibers and nanorods. We reflect on the availability and suitability of the latter types of building blocks to enable superstructures and colloidal associations. As far as processing, we describe the most relevant transitions, from the solution to the gel state and the routes that can be used to arrive to consolidated materials with prescribed properties. We highlight the implementation of supramolecular and superstructures in different technological fields that exploit the synergies exhibited by renewable polymers and biocolloids integrated in structured materials.

Kinetics and Thermodynamics of Hemicellulose Adsorption onto Nanofibril Cellulose Surfaces by QCM-D

The adsorption of hemicellulose derived from bagasse onto nanofibril cellulose has been studied in terms of kinetics and thermodynamics. In situ monitoring of bagasse hemicellulose with different molecular weights onto the nanofibril cellulose surfaces has been investigated using quartz crystal microbalance and dissipation. Then, the adsorption kinetics and thermodynamic properties were analyzed. Also, the sorption behavior and the adsorption layer properties were quantified in aqueous solutions. The maximum adsorption mass was 2.8314 mg/m2 at a concentration of 200 mg/L. Also, compared with that of the low-molecular-weight hemicellulose, the adsorption capacity of the high-molecular-weight hemicellulose was higher, and the adsorption rate changed faster and could reach an equilibrium in a shorter time. The intraparticle diffusion kinetic model represented the experimental data very well. Therefore, the kinetics of hemicellulose on the fiber adsorption was commonly described by a three-stage process: mass to transfer, diffusion, and equilibrium. The Gibbs energy change of the adsorption of hemicellulose was found to range from -20.04 to -49.75 kJ/mol at 25 °C. The entropy change was >0. It was found that the adsorption was spontaneous, and the adsorbed mass increased with the increase in temperature. This strengthened the conclusion that the adsorption process of the bagasse hemicellulose on the NFC was driven by the increase in entropy caused by the release of water molecules due to hydrophobic interaction or solvent reorganization.

Unveiling the transcriptomic complexity of Miscanthus sinensis using a combination of PacBio long read- and Illumina short read sequencing platforms

Background

Miscanthus sinensis Andersson is a perennial grass that exhibits remarkable lignocellulose characteristics suitable for sustainable bioenergy production. However, knowledge of the genetic resources of this species is relatively limited, which considerably hampers further work on its biology and genetic improvement.

Results

In this study, through analyzing the transcriptome of mixed samples of leaves and stems using the latest PacBio Iso-Seq sequencing technology combined with Illumina HiSeq, we report the first full-length transcriptome dataset of M. sinensis with a total of 58.21 Gb clean data. An average of 15.75 Gb clean reads of each sample were obtained from the PacBio Iso-Seq system, which doubled the data size (6.68 Gb) obtained from the Illumina HiSeq platform. The integrated analyses of PacBio- and Illumina-based transcriptomic data uncovered 408,801 non-redundant transcripts with an average length of 1,685 bp. Of those, 189,406 transcripts were commonly identified by both methods, 169,149 transcripts with an average length of 619 bp were uniquely identified by Illumina HiSeq, and 51,246 transcripts with an average length of 2,535 bp were uniquely identified by PacBio Iso-Seq. Approximately 96 % of the final combined transcripts were mapped back to the Miscanthus genome, reflecting the high quality and coverage of our sequencing results. When comparing our data with genomes of four species of Andropogoneae, M. sinensis showed the closest relationship with sugarcane with up to 93 % mapping ratios, followed by sorghum with up to 80 % mapping ratios, indicating a high conservation of orthologs in these three genomes. Furthermore, 306,228 transcripts were successfully annotated against public databases including cell wall related genes and transcript factor families, thus providing many new insights into gene functions. The PacBio Iso-Seq data also helped identify 3,898 alternative splicing events and 2,963 annotated AS isoforms within 10 function categories.

Conclusions

Taken together, the present study provides a rich data set of full-length transcripts that greatly enriches our understanding of M. sinensis transcriptomic resources, thus facilitating further genetic improvement and molecular studies of the Miscanthus species.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12864-021-07971-x.

Characterization of glycoside hydrolase family 11 xylanase from Streptomyces sp. strain J103; its synergetic effect with acetyl xylan esterase and enhancement of enzymatic hydrolysis of lignocellulosic biomass

Background

Xylanase-containing enzyme cocktails are used on an industrial scale to convert xylan into value-added products, as they hydrolyse the β-1,4-glycosidic linkages between xylopyranosyl residues. In the present study, we focused on xynS1, the glycoside hydrolase (GH) 11 xylanase gene derived from the Streptomyces sp. strain J103, which can mediate XynS1 protein synthesis and lignocellulosic material hydrolysis.

Results

xynS1 has an open reading frame with 693 base pairs that encodes a protein with 230 amino acids. The predicted molecular weight and isoelectric point of the protein were 24.47 kDa and 7.92, respectively. The gene was cloned into the pET-11a expression vector and expressed in Escherichia coli BL21(DE3). Recombinant XynS1 (rXynS1) was purified via His-tag affinity column chromatography. rXynS1 exhibited optimal activity at a pH of 5.0 and temperature of 55 °C. Thermal stability was in the temperature range of 50–55 °C. The estimated K_m and V_max values were 51.4 mg/mL and 898.2 U/mg, respectively. One millimolar of Mn²⁺ and Na⁺ ions stimulated the activity of rXynS1 by up to 209% and 122.4%, respectively, and 1 mM Co²⁺ and Ni²⁺ acted as inhibitors of the enzyme. The mixture of rXynS1, originates from Streptomyces sp. strain J103 and acetyl xylan esterase (AXE), originating from the marine bacterium Ochrovirga pacifica, enhanced the xylan degradation by 2.27-fold, compared to the activity of rXynS1 alone when Mn²⁺ was used in the reaction mixture; this reflected the ability of both enzymes to hydrolyse the xylan structure. The use of an enzyme cocktail of rXynS1, AXE, and commercial cellulase (Celluclast® 1.5 L) for the hydrolysis of lignocellulosic biomass was more effective than that of commercial cellulase alone, thereby increasing the relative activity 2.3 fold.

Conclusion

The supplementation of rXynS1 with AXE enhanced the xylan degradation process via the de-esterification of acetyl groups in the xylan structure. Synergetic action of rXynS1 with commercial cellulase improved the hydrolysis of pre-treated lignocellulosic biomass; thus, rXynS1 could potentially be used in several industrial applications.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-021-01619-x.

Structural and molecular dynamics investigations of ligand stabilization via secondary binding site interactions in Paenibacillus xylanivorans GH11 xylanase

Glycoside hydrolases (GHs) are essential for plant biomass deconstruction. GH11 family consist of endo-β-1,4-xylanases which hydrolyze xylan, the second most abundant cell wall biopolymer after cellulose, into small bioavailable oligomers. Structural requirements for enzymatic mechanism of xylan hydrolysis is well described for GH11 members. However, over the last years, it has been discovered that some enzymes from GH11 family have a secondary binding sites (SBS), which modulate the enzymes activities, but mechanistic details of the molecular communication between the active site and SBS of the enzymes remain a conundrum. In the present work we structurally characterized GH11 xylanase from Paenibacillus xylanivorans A57 (PxXyn11B), a microorganism of agricultural importance, using protein crystallography and molecular dynamics simulations. The PxXyn11B structure was solved to 2.5 Å resolution and different substrates (xylo-oligosaccharides from X3 to X6), were modelled in its active and SBS sites. Molecular Dynamics (MD) simulations revealed an important role of SBS in the activity and conformational mobility of PxXyn11B, demonstrating that binding of the reaction products to the SBS of the enzyme stabilizes the N-terminal region and, consequently, the active site. Furthermore, MD simulations showed that the longer the ligand, the better is the stabilization within active site, and the positive subsites contribute less to the stabilization of the substrates than the negative ones. These findings provide rationale for the observed enzyme kinetics, shedding light on the conformational modulation of the GH11 enzymes via their SBS mediated by the positive molecular feedback loop which involve the products of the enzymatic reaction.

Molecular Insight into the Cosolvent Effect on Lignin-Cellulose Adhesion

Understanding and controlling the physical adsorption of lignin compounds on cellulose pulp are key parameters in the successful optimization of organosolv processes. The effect of binary organic-aqueous solvents on the coordination of lignin to cellulose was studied with molecular dynamics simulations, considering ethanol and acetonitrile to be organic cosolvents in aqueous solutions in comparison to their monocomponent counterparts. The structures of the solvation shells around cellulose and lignin and the energetics of lignin-cellulose adhesion indicate a more effective disruption of lignin-cellulose binding by binary solvents. The synergic effect between solvent components is explained by their preferential interactions with lignin-cellulose complexes. In the presence of pure water, long-lasting H-bonds in the lignin-cellulose complex are observed, promoted by the nonfavorable interactions of lignin with water. Ethanol and acetonitrile compete with water and lignin for cellulose oxygen binding sites, causing a nonlinear decrease in the lignin-cellulose interactions with the amount of the organic component. This effect is modulated by the water exclusion from the cellulose solvation shell by the organic solvent component. The amount and rate of water exclusion depend on the type of organic cosolvent and its concentration.

A Comparative Transcriptome Analysis, Conserved Regulatory Elements and Associated Transcription Factors Related to Accumulation of Fusariotoxins in Grain of Rye (Secale cereale L.) Hybrids

Detoxification of fusariotoxin is a type V Fusarium head blight (FHB) resistance and is considered a component of type II resistance, which is related to the spread of infection within spikes. Understanding this type of resistance is vital for FHB resistance, but to date, nothing is known about candidate genes that confer this resistance in rye due to scarce genomic resources. In this study, we generated a transcriptomic resource. The molecular response was mined through a comprehensive transcriptomic analysis of two rye hybrids differing in the build-up of fusariotoxin contents in grain upon pathogen infection. Gene mining identified candidate genes and pathways contributing to the detoxification of fusariotoxins in rye. Moreover, we found cis regulatory elements in the promoters of identified genes and linked them to transcription factors. In the fusariotoxin analysis, we found that grain from the Nordic seed rye hybrid "Helltop" accumulated 4 times higher concentrations of deoxynivalenol (DON), 9 times higher nivalenol (NIV), and 28 times higher of zearalenone (ZEN) than that of the hybrid "DH372" after artificial inoculation under field conditions. In the transcriptome analysis, we identified 6675 and 5151 differentially expressed genes (DEGs) in DH372 and Helltop, respectively, compared to non-inoculated control plants. A Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis revealed that DEGs were associated with glycolysis and the mechanistic target of rapamycin (mTOR) signaling pathway in Helltop, whereas carbon fixation in photosynthesis organisms were represented in DH372. The gene ontology (GO) enrichment and gene set enrichment analysis (GSEA) of DEGs lead to identification of the metabolic and biosynthetic processes of peptides and amides in DH372, whereas photosynthesis, negative regulation of catalytic activity, and protein-chromophore linkage were the significant pathways in Helltop. In the process of gene mining, we found four genes that were known to be involved in FHB resistance in wheat and that were differentially expressed after infection only in DH372 but not in Helltop. Based on our results, we assume that DH372 employed a specific response to pathogen infection that led to detoxification of fusariotoxin and prevented their accumulation in grain. Our results indicate that DH372 might resist the accumulation of fusariotoxin through activation of the glycolysis and drug metabolism via cytochrome P450. The identified genes in DH372 might be regulated by the WRKY family transcription factors as associated cis regulatory elements found in the in silico analysis. The results of this study will help rye breeders to develop strategies against type V FHB.

Wood hemicelluloses exert distinct biomechanical contributions to cellulose fibrillar networks

Hemicelluloses, a family of heterogeneous polysaccharides with complex molecular structures, constitute a fundamental component of lignocellulosic biomass. However, the contribution of each hemicellulose type to the mechanical properties of secondary plant cell walls remains elusive. Here we homogeneously incorporate different combinations of extracted and purified hemicelluloses (xylans and glucomannans) from softwood and hardwood species into self-assembled networks during cellulose biosynthesis in a bacterial model, without altering the morphology and the crystallinity of the cellulose bundles. These composite hydrogels can be therefore envisioned as models of secondary plant cell walls prior to lignification. The incorporated hemicelluloses exhibit both a rigid phase having close interactions with cellulose, together with a flexible phase contributing to the multiscale architecture of the bacterial cellulose hydrogels. The wood hemicelluloses exhibit distinct biomechanical contributions, with glucomannans increasing the elastic modulus in compression, and xylans contributing to a dramatic increase of the elongation at break under tension. These diverging effects cannot be explained solely from the nature of their direct interactions with cellulose, but can be related to the distinct molecular structure of wood xylans and mannans, the multiphase architecture of the hydrogels and the aggregative effects amongst hemicellulose-coated fibrils. Our study contributes to understanding the specific roles of wood xylans and glucomannans in the biomechanical integrity of secondary cell walls in tension and compression and has significance for the development of lignocellulosic materials with controlled assembly and tailored mechanical properties.

Hemicelluloses are an essential constituent of plant cell walls, but the individual biomechanical roles remain elusive. Here the authors report on the interaction of wood hemicellulose with bacterial cellulose during deposition and explore the resultant fibrillar architecture and mechanical properties.

De novo transcriptome assembly, functional annotation, and expression profiling of rye (Secale cereale L.) hybrids inoculated with ergot (Claviceps purpurea)

Rye is used as food, feed, and for bioenergy production and remain an essential grain crop for cool temperate zones in marginal soils. Ergot is known to cause severe problems in cross-pollinated rye by contamination of harvested grains. The molecular response of the underlying mechanisms of this disease is still poorly understood due to the complex infection pattern. RNA sequencing can provide astonishing details about the transcriptional landscape, hence we employed a transcriptomic approach to identify genes in the underlying mechanism of ergot infection in rye. In this study, we generated de novo assemblies from twelve biological samples of two rye hybrids with identified contrasting phenotypic responses to ergot infection. The final transcriptome of ergot susceptible (DH372) and moderately ergot resistant (Helltop) hybrids contain 208,690 and 192,116 contigs, respectively. By applying the BUSCO pipeline, we confirmed that these transcriptome assemblies contain more than 90% of gene representation of the available orthologue groups at Virdiplantae odb10. We employed a de novo assembled and the draft reference genome of rye to count the differentially expressed genes (DEGs) between the two hybrids with and without inoculation. The gene expression comparisons revealed that 228 genes were linked to ergot infection in both hybrids. The genome ontology enrichment analysis of DEGs associated them with metabolic processes, hydrolase activity, pectinesterase activity, cell wall modification, pollen development and pollen wall assembly. In addition, gene set enrichment analysis of DEGs linked them to cell wall modification and pectinesterase activity. These results suggest that a combination of different pathways, particularly cell wall modification and pectinesterase activity contribute to the underlying mechanism that might lead to resistance against ergot in rye. Our results may pave the way to select genetic material to improve resistance against ergot through better understanding of the mechanism of ergot infection at molecular level. Furthermore, the sequence data and de novo assemblies are valuable as scientific resources for future studies in rye.

Adsorption of CO2 and CH4 in MIL-47 investigated by the 3D-RISM molecular theory of solvation

Metal-organic frameworks (MOFs) comprise a class of highly porous nanomaterials formed by the assembly of organic molecular templates connected by metal ions. These materials exhibit a large diversity of pore size and geometry, topology, surface area, and chemical functionality. MOFs are particularly promising materials for developing new technologies for capture and storage of greenhouse gases such as methane and carbon dioxide. Here we apply the three dimensional reference interaction site model (3D-RISM) molecular theory of solvation to study the interactions of CO₂ and CH₄ with the metal-organic material MIL-47. The 3D-RISM integral equations were solved to determine the three dimensional density correlation functions of the gas (solvent) relative to the atomic positions of the MIL-47 framework, treated as static solute sites. The computed solvent spatial distributions inside MIL-47 pores were used to identify whether or not there exist preferable binding sites and the binding free energy landscape for the gas of interest at low computational costs compared with other molecular modeling techniques, such as grand canonical Monte Carlo and molecular dynamics simulations. The 3D-RISM formalism was applied to pure CO₂, pure CH₄, and binary mixtures of these gases of various compositions under different pressure conditions. The results indicate that both gases bind very weakly to MIL-47 and that this material exhibits nearly vanishing CO₂/CH₄ selectivity. The 3D-RISM computations presented here can be extended to investigate the physical adsorption of gases on other MOFs and nanoporous materials, providing an alternative low-cost computational approach to study gas capture and storage in nanoporous materials in general and, in particular, to determine the binding free-energy landscape in these systems.

Optimising wheat straw alkali-organosolv pre-treatment to enhance hemicellulose modification and compatibility with reinforcing fillers

Hemicellulose acetylation, filler compatibility and film hydrophobicity were enhanced by optimising alkali-catalysed organosolv treatment conditions for wheat straw before hemicellulose extraction. Two optimum (OPT) conditions were established by varying organosolv components' concentrations [ethanol (EC) (50-80%) and NaOH (1-13%)], and time (2-6 h), in a Box-Behnken experimental design. The OPT1 (1% NaOH/50% EC/6h) that enhanced acetylation and filler compatibility, and OPT2 (13% NaOH/80% EC/5h) that enhanced hydrophobicity by minimising degree of acetylation (DS), uronic acid content and arabinose/xylose ratio. The films made from OPT2 hemicellulose had higher water contact angle (68.1°) than OPT1 hemicellulose (39.90°). However, OPT1 hemicellulose had a higher DS (1.7 vs 0.4), and their acetylated nanocellulose reinforced films had higher tensile strength (10.59 vs 4.87 MPa) and Young modulus (590.15 vs 323.64 MPa) than OPT2 hemicellulose. Therefore, hemicellulose acetylation, hydrophobicity and filler interaction can be engineered by manipulating the organosolv treatment conditions.

Relationship between sugarcane culm and leaf biomass composition and saccharification efficiency

BACKGROUND

Lignocellulosic biomass is recognized as a promising renewable feedstock for the production of biofuels. However, current methods for converting biomass into fermentable sugars are considered too expensive and inefficient due to the recalcitrance of the secondary cell wall. Biomass composition can be modified to create varieties that are efficiently broken down to release cell wall sugars. This study focused on identifying the key biomass components influencing plant cell wall recalcitrance that can be targeted for selection in sugarcane, an important and abundant source of biomass.

RESULTS

Biomass composition and the amount of glucan converted into glucose after saccharification were measured in leaf and culm tissues from seven sugarcane genotypes varying in fiber composition after no pretreatment and dilute acid, hydrothermal and ionic liquid pretreatments. In extractives-free sugarcane leaf and culm tissue, glucan, xylan, acid-insoluble lignin (AIL) and acid-soluble lignin (ASL) ranged from 20 to 32%, 15% to 21%, 14% to 20% and 2% to 4%, respectively. The ratio of syringyl (S) to guaiacyl (G) content in the lignin ranged from 1.5 to 2.2 in the culm and from 0.65 to 1.1 in the leaf. Hydrothermal and dilute acid pretreatments predominantly reduced xylan content, while the ionic liquid (IL) pretreatment targeted AIL reduction. The amount of glucan converted into glucose after 26 h of pre-saccharification was highest after IL pretreatment (42% in culm and 63.5% in leaf) compared to the other pretreatments. Additionally, glucan conversion in leaf tissues was approximately 1.5-fold of that in culm tissues. Percent glucan conversion varied between genotypes but there was no genotype that was superior to all others across the pretreatment groups. Path analysis revealed that S/G ratio, AIL and xylan had the strongest negative associations with percent glucan conversion, while ASL and glucan content had strong positive influences.

CONCLUSION

To improve saccharification efficiency of lignocellulosic biomass, breeders should focus on reducing S/G ratio, xylan and AIL content and increasing ASL and glucan content. This will be key for the development of sugarcane varieties for bioenergy uses.

Thermogravimetric analysis and kinetic modeling of low-transition-temperature mixtures pretreated oil palm empty fruit bunch for possible maximum yield of pyrolysis oil

The impacts of low-transition-temperature mixtures (LTTMs) pretreatment on thermal decomposition and kinetics of empty fruit bunch (EFB) were investigated by thermogravimetric analysis. EFB was pretreated with the LTTMs under different duration of pretreatment which enabled various degrees of alteration to their structure. The TG-DTG curves showed that LTTMs pretreatment on EFB shifted the temperature and rate of decomposition to higher values. The EFB pretreated with sucrose and choline chloride-based LTTMs had attained the highest mass loss of volatile matter (78.69% and 75.71%) after 18 h of pretreatment. For monosodium glutamate-based LTTMs, the 24 h pretreated EFB had achieved the maximum mass loss (76.1%). Based on the Coats-Redfern integral method, the LTTMs pretreatment led to an increase in activation energy of the thermal decomposition of EFB from 80.00 to 82.82-94.80 kJ/mol. The activation energy was mainly affected by the demineralization and alteration in cellulose crystallinity after LTTMs pretreatment.

Microwave-assisted ionic liquid-mediated rapid catalytic conversion of non-edible lignocellulosic Sunn hemp fibres to biofuels

Sunn hemp fibre - a cellulose-rich crystalline non-food energy crop, containing 75.6% cellulose, 10.05% hemicellulose, 10.32% lignin, with high crystallinity (80.17%) and degree of polymerization (650) - is identified as a new non-food substrate for lignocellulosic biofuel production. Microwave irradiation is employed to rapidly rupture the cellulose's glycosidic bonds and enhance glucose yield to 78.7% at 160 °C in only 46 min. The reactants - long-chain cellulose, ionic liquid, transition metal catalyst, and water - form a polar supramolecular complex that rotates under the microwave's alternating polarity and rapidly dissipates the electromagnetic energy through molecular collisions, thus accelerating glycosidic bond breakage. In 46 min, 1 kg of Sunn hemp fibres containing 756 g of cellulose produces 595 g of glucose at 160 °C, and 203 g of hydroxymethyl furfural (furanic biofuel precursor) at 180 °C. Yeast mediated glucose fermentation produces 75.6% bioethanol yield at 30 °C, and the ionic liquid is recycled for cost-effectiveness.

Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading

In pursuit of more sustainable and competitive biorefineries, the effective valorisation of lignin is key. An alluring opportunity is the exploitation of lignin as a resource for chemicals. Three technological biorefinery aspects will determine the realisation of a successful lignin-to-chemicals valorisation chain, namely (i) lignocellulose fractionation, (ii) lignin depolymerisation, and (iii) upgrading towards targeted chemicals. This review provides a summary and perspective of the extensive research that has been devoted to each of these three interconnected biorefinery aspects, ranging from industrially well-established techniques to the latest cutting edge innovations. To navigate the reader through the overwhelming collection of literature on each topic, distinct strategies/topics were delineated and summarised in comprehensive overview figures. Upon closer inspection, conceptual principles arise that rationalise the success of certain methodologies, and more importantly, can guide future research to further expand the portfolio of promising technologies. When targeting chemicals, a key objective during the fractionation and depolymerisation stage is to minimise lignin condensation (i.e. formation of resistive carbon-carbon linkages). During fractionation, this can be achieved by either (i) preserving the (native) lignin structure or (ii) by tolerating depolymerisation of the lignin polymer but preventing condensation through chemical quenching or physical removal of reactive intermediates. The latter strategy is also commonly applied in the lignin depolymerisation stage, while an alternative approach is to augment the relative rate of depolymerisation vs. condensation by enhancing the reactivity of the lignin structure towards depolymerisation. Finally, because depolymerised lignins often consist of a complex mixture of various compounds, upgrading of the raw product mixture through convergent transformations embodies a promising approach to decrease the complexity. This particular upgrading approach is termed funneling, and includes both chemocatalytic and biological strategies.

Transcriptome analysis of genes involved in secondary cell wall biosynthesis in developing internodes of Miscanthus lutarioriparius

Miscanthus is a promising lignocellulosic bioenergy crop for bioethanol production. To identify candidate genes and regulation networks involved in secondary cell wall (SCW) development in Miscanthus, we performed de novo transcriptome analysis of a developing internode. According to the histological and in-situ histochemical analysis, an elongating internode of M. lutarioriparius can be divided into three distinct segments, the upper internode (UI), middle internode (MI) and basal internode (BI), each representing a different stage of SCW development. The transcriptome analysis generated approximately 300 million clean reads, which were de novo assembled into 79,705 unigenes. Nearly 65% of unigenes was annotated in seven public databases. Comparative profiling among the UI, MI and BI revealed four distinct clusters. Moreover, detailed expression profiling was analyzed for gene families and transcription factors (TFs) involved in SCW biosynthesis, assembly and modification. Based on the co-expression patterns, putative regulatory networks between TFs and SCW-associated genes were constructed. The work provided the first transcriptome analysis of SCW development in M. lutarioriparius. The results obtained provide novel insights into the biosynthesis and regulation of SCW in Miscanthus. In addition, the genes identified represent good candidates for further functional studies to unravel their roles in SCW biosynthesis and modification.

Effects of the Surface Morphology and Conformations of Lignocellulosic Biomass Biopolymers on Their Nanoscale Interactions with Hydrophobic Self-Assembled Monolayers

The effects of the morphology and conformations of the surface biopolymers present on lignocellulosic biomass as well as their steric hindrance on enzymatic adsorption to biomass surfaces remain elusive. In a step to better understand these effects, nanoscale steric forces between a model surface that represents the hydrophobic residues of a cellulase enzyme and a set of reference lignocellulosic substrates were measured using atomic force microscopy (AFM) in liquid media. The reference substrates investigated were prepared by kraft, sulfite, and organosolv pulping pretreatment methods and varied in their surface lignin, xylan, and acetone extractives' contents. Measured steric forces were quantified through fitting to a model developed to describe polyelectrolytes brushes in terms of a brush thickness and a brush grafting density. Our data indicated that cellulose microfibrils extend from the microfibril matrix leading to a long-range steric repulsion and low attractive forces to the hydrophobic model of the enzyme, suggesting that steric hindering can be a possible mechanism for nonproductive binding of enzymes to cellulose. When the amount of xylan increased in the absence of lignin, steric repulsions between the hydrophobic model of the enzyme, and biomass biopolymers decreased as a result of collapsed cellulose microfibrils and adhesion forces increased. This suggests that leaving a small amount of xylan after biomass pretreatment can help improve enzymatic binding to cellulose. Irrespective of the type of lignin present on biomass, grafting densities increased and brush thicknesses decreased compared to those of lignin-free substrates. When compared to lignin-free substrates, lignin-containing substrates had higher attractive forces and lower steric repulsive forces. In addition, AFM images of the reference substrates in the wet and dry states showed that lignin precipitates on the biomass surface where kraft lignin had the highest particle size leading to a limited accessibility of the enzyme to the cellulose in biomass. When the effects of lignin precipitate size, the adhesion force, and steric forces on nonproductive enzymatic binding were all considered, our results indicate that organosolv pretreatment should be the treatment of choice to minimize enzymatic nonproductive binding to lignin.

Insights into cell wall structure of Sida hermaphrodita and its influence on recalcitrance

The perennial plant Sida hermaphrodita (Sida) is attracting attention as potential energy crop. Here, the first detailed view on non-cellulosic Sida cell wall polysaccharide composition, structure and architecture is given. Cell walls were prepared from Sida stems and sequentially extracted with aqueous buffers and alkali. The structures of the quantitatively predominant polysaccharides present in each fraction were determined by biochemical characterization, glycome profiling and mass spectrometry. The amounts of glucose released by Accellerase-1500^® treatment of the cell wall and the cell wall residue remaining after each extraction were used to assess the roles of pectin and hemicellulose in the recalcitrance of Sida biomass. 4-O-Methyl glucuronoxylan with a low proportion of side substitutions was identified as the major non-cellulosic glycan component of Sida stem cell walls. Pectic polysaccharides and xylans were found to be associated with lignin, suggesting that these polysaccharides have roles in Sida cell wall recalcitrance to enzymatic hydrolysis.

A closure relation to molecular theory of solvation for macromolecules

We propose a closure to the integral equations of molecular theory of solvation, particularly suitable for polar and charged macromolecules in electrolyte solution. This includes such systems as oligomeric polyelectrolytes at a finite concentration in aqueous and various non-aqueous solutions, as well as drug-like compounds in solution. The new closure by Kobryn, Gusarov, and Kovalenko (KGK closure) imposes the mean spherical approximation (MSA) almost everywhere in the solvation shell but levels out the density distribution function to zero (with the continuity at joint boundaries) inside the repulsive core and in the spatial regions of strong density depletion emerging due to molecular associative interactions. Similarly to MSA, the KGK closure reduces the problem to a linear equation for the direct correlation function which is predefined analytically on most of the solvation shells and has to be determined numerically on a relatively small (three-dimensional) domain of strong depletion, typically within the repulsive core. The KGK closure leads to the solvation free energy in the form of the Gaussian fluctuation (GF) functional. We first test the performance of the KGK closure coupled to the reference interaction site model (RISM) integral equations on the examples of Lennard-Jones liquids, polar and nonpolar molecular solvents, including water, and aqueous solutions of simple ions. The solvation structure, solvation chemical potential, and compressibility obtained from RISM with the KGK closure favorably compare to the results of the hypernetted chain (HNC) and Kovalenko-Hirata (KH) closures, including their combination with the GF solvation free energy. We then use the KGK closure coupled to RISM to obtain the solvation structure and thermodynamics of oligomeric polyelectrolytes and drug-like compounds at a finite concentration in electrolyte solution, for which no convergence is obtained with other closures. For comparison, we calculate their solvation structure from molecular dynamics (MD) simulations. We further couple the 3D-RISM integral equation with the 3D-version of the KGK closure, and solve it for molecular mixtures as well as oligomeric polyelectrolytes and drug-like molecules in electrolyte solutions.

MTS-MD of Biomolecules Steered with 3D-RISM-KH Mean Solvation Forces Accelerated with Generalized Solvation Force Extrapolation

We developed a generalized solvation force extrapolation (GSFE) approach to speed up multiple time step molecular dynamics (MTS-MD) of biomolecules steered with mean solvation forces obtained from the 3D-RISM-KH molecular theory of solvation (three-dimensional reference interaction site model with the Kovalenko-Hirata closure). GSFE is based on a set of techniques including the non-Eckart-like transformation of coordinate space separately for each solute atom, extension of the force-coordinate pair basis set followed by selection of the best subset, balancing the normal equations by modified least-squares minimization of deviations, and incremental increase of outer time step in motion integration. Mean solvation forces acting on the biomolecule atoms in conformations at successive inner time steps are extrapolated using a relatively small number of best (closest) solute atomic coordinates and corresponding mean solvation forces obtained at previous outer time steps by converging the 3D-RISM-KH integral equations. The MTS-MD evolution steered with GSFE of 3D-RISM-KH mean solvation forces is efficiently stabilized with our optimized isokinetic Nosé-Hoover chain (OIN) thermostat. We validated the hybrid MTS-MD/OIN/GSFE/3D-RISM-KH integrator on solvated organic and biomolecules of different stiffness and complexity: asphaltene dimer in toluene solvent, hydrated alanine dipeptide, miniprotein 1L2Y, and protein G. The GSFE accuracy and the OIN efficiency allowed us to enlarge outer time steps up to huge values of 1-4 ps while accurately reproducing conformational properties. Quasidynamics steered with 3D-RISM-KH mean solvation forces achieves time scale compression of conformational changes coupled with solvent exchange, resulting in further significant acceleration of protein conformational sampling with respect to real time dynamics. Overall, this provided a 50- to 1000-fold effective speedup of conformational sampling for these systems, compared to conventional MD with explicit solvent. We have been able to fold the miniprotein from a fully denatured, extended state in about 60 ns of quasidynamics steered with 3D-RISM-KH mean solvation forces, compared to the average physical folding time of 4-9 μs observed in experiment.

Exploring tomato Solanum pennellii introgression lines for residual biomass and enzymatic digestibility traits

Background

Residual biomass production for fuel conversion represents a unique opportunity to avoid concerns about compromising food supply by using dedicated feedstock crops. Developing tomato varieties suitable for both food consumption and fuel conversion requires the establishment of new selection methods.

Results

A tomato Solanum pennellii introgression population was assessed for fruit yield, biomass phenotypic diversity, and for saccharification potential. Introgression lines 2–5, 2–6, 6–3, 7–2, 10–2 and 12–4 showed the best combination of fruit and residual biomass production. Lignin, cellulose, hemicellulose content and saccharification rate showed a wide variation in the tested lines. Within hemicellulose, xylose value was high in IL 6–3, IL 7–2 and IL 6–2, whereas arabinose showed a low content in IL 10–2, IL 6–3 and IL 2–6. The latter line showed also the highest ethanol potential production. Alkali pre-treatment resulted in the highest values of saccharification in most of lines tested, suggesting that chemical pretreatment is an important factor for improving biomass processability. Interestingly, extreme genotypes for more than one single trait were found, allowing the identification of better genotypes. Cell wall related genes mapping in genomic regions involved into tomato biomass production and digestibility variation highlighted potential candidate genes. Molecular expression profile of few of them provided useful information about challenged pathways.

Conclusions

The screening of S. pennellii introgression population resulted very useful for delving into complex traits such as biomass production and digestibility. The extreme genotypes identified could be fruitfully employed for both genetic studies and breeding.

Electronic supplementary material

The online version of this article (doi:10.1186/s12863-016-0362-9) contains supplementary material, which is available to authorized users.

Conformations of Low-Molecular-Weight Lignin Polymers in Water

Low-molecular-weight lignin binds to cellulose during the thermochemical pretreatment of biomass for biofuel production, which prevents the efficient hydrolysis of the cellulose to sugars. The binding properties of lignin are influenced strongly by the conformations it adopts. Here, we use molecular dynamics simulations in aqueous solution to investigate the dependence of the shape of lignin polymers on chain length and temperature. Lignin is found to adopt collapsed conformations in water at 300 and 500 K. However, at 300 K, a discontinuous transition is found in the shape of the polymer as a function of the chain length. Below a critical degree of polymerization, Nc =15, the polymer adopts less spherical conformations than above Nc. The transition disappears at high temperatures (500 K) at which only spherical shapes are adopted. An implication relevant to cellulosic biofuel production is that lignin will self-aggregate even at high pretreatment temperatures.

A GH115 α-glucuronidase from Schizophyllum commune contributes to the synergistic enzymatic deconstruction of softwood glucuronoarabinoxylan

BACKGROUND

Lignocellulosic biomass from softwood represents a valuable resource for the production of biofuels and bio-based materials as alternatives to traditional pulp and paper products. Hemicelluloses constitute an extremely heterogeneous fraction of the plant cell wall, as their molecular structures involve multiple monosaccharide components, glycosidic linkages, and decoration patterns. The complete enzymatic hydrolysis of wood hemicelluloses into monosaccharides is therefore a complex biochemical process that requires the activities of multiple degradative enzymes with complementary activities tailored to the structural features of a particular substrate. Glucuronoarabinoxylan (GAX) is a major hemicellulose component in softwood, and its structural complexity requires more enzyme specificities to achieve complete hydrolysis compared to glucuronoxylans from hardwood and arabinoxylans from grasses.

RESULTS

We report the characterisation of a recombinant α-glucuronidase (Agu115) from Schizophyllum commune capable of removing (4-O-methyl)-glucuronic acid ((Me)GlcA) residues from polymeric and oligomeric xylan. The enzyme is required for the complete deconstruction of spruce glucuronoarabinoxylan (GAX) and acts synergistically with other xylan-degrading enzymes, specifically a xylanase (Xyn10C), an α-l-arabinofuranosidase (AbfA), and a β-xylosidase (XynB). Each enzyme in this mixture showed varying degrees of potentiation by the other activities, likely due to increased physical access to their respective target monosaccharides. The exo-acting Agu115 and AbfA were unable to remove all of their respective target side chain decorations from GAX, but their specific activity was significantly boosted by the addition of the endo-Xyn10C xylanase. We demonstrate that the proposed enzymatic cocktail (Agu115 with AbfA, Xyn10C and XynB) achieved almost complete conversion of GAX to arabinofuranose (Araf), xylopyranose (Xylp), and MeGlcA monosaccharides. Addition of Agu115 to the enzymatic cocktail contributes specifically to 25 % of the conversion. However, traces of residual oligosaccharides resistant to this combination of enzymes were still present after deconstruction, due to steric hindrances to enzyme access to the substrate.

CONCLUSIONS

Our GH115 α-glucuronidase is capable of finely tailoring the molecular structure of softwood GAX, and contributes to the almost complete saccharification of GAX in synergy with other exo- and endo-xylan-acting enzymes. This has great relevance for the cost-efficient production of biofuels from softwood lignocellulose.

Diversity of fungal feruloyl esterases: updated phylogenetic classification, properties, and industrial applications

Feruloyl esterases (FAEs) represent a diverse group of carboxyl esterases that specifically catalyze the hydrolysis of ester bonds between ferulic (hydroxycinnamic) acid and plant cell wall polysaccharides. Therefore, FAEs act as accessory enzymes to assist xylanolytic and pectinolytic enzymes in gaining access to their site of action during biomass conversion. Their ability to release ferulic acid and other hydroxycinnamic acids from plant biomass makes FAEs potential biocatalysts in a wide variety of applications such as in biofuel, food and feed, pulp and paper, cosmetics, and pharmaceutical industries. This review provides an updated overview of the knowledge on fungal FAEs, in particular describing their role in plant biomass degradation, diversity of their biochemical properties and substrate specificities, their regulation and conditions needed for their induction. Furthermore, the discovery of new FAEs using genome mining and phylogenetic analysis of current publicly accessible fungal genomes will also be presented. This has led to a new subfamily classification of fungal FAEs that takes into account both phylogeny and substrate specificity.

Mechanism of improved cellulosic bio-ethanol production from alfalfa stems via ambient-temperature acid pretreatment

Model compounds and recalcitrant biomass were studied to elucidate the mechanism of ambient-temperature acid pretreatment of cellulosic biomass for bio-ethanol production. Pure cellulose, a pure hemicellulose and alfalfa stems were pretreated with sulfuric acid under ambient temperature with varied acid loading and time. Changes in water-soluble carbohydrates (WSCs) and chemical components of substrates were determined, and ethanol production via simultaneous saccharification and fermentation (SSF) was studied. The results showed significant amount of WSCs formed, and the WSCs increased with increasing acid loading and pretreatment time. The ethanol yields from pure cellulose were primarily affected by the added ash. Acid loading showed significant positive effect on ethanol production from alfalfa stems, whereas pretreatment time showed much weaker positive effect. However, non-significant amounts of WSCs were removed by washing of dried substrates. It was hypothesized to be because the WSCs adsorbed onto bulk substrates during the freeze-drying step, as supported by experimental results.