Alcohol Amination with Ammonia Catalyzed by an Acridine-Based Ruthenium Pincer Complex: A Mechanistic Study

Correction: Acridine-based copper(I) PNP pincer complexes: catalysts for alkyne hydroboration and borylation of aryl halides

Correction for 'Acridine-based copper(I) PNP pincer complexes: catalysts for alkyne hydroboration and borylation of aryl halides' by Angus Olding et al., Dalton Trans., 2024, 53, 4471-4478, https://doi.org/10.1039/D3DT04269C.

Sustainable amidation through acceptorless dehydrogenative coupling by pincer-type catalysts: recent advances

The amide functional group is ubiquitous in living organisms, and is of particular importance in bioactive compounds and pharmaceuticals. Because of the prevalence and significance of the amide bond, considerable efforts have been invested throughout the years in developing new synthetic methodologies for its formation. Nevertheless, amide synthesis still largely relies on variants of the traditional condensation of carboxylic acids and amines, mediated by stoichiometric coupling reagents. This poses a sustainability challenge, since such reactions suffer from unfavorable atom and step economies, involve harmful chemicals and produce chemical waste. Hence, establishing sustainable approaches to amide synthesis is of great importance. Over the last two decades, we have developed homogeneous catalytic reactions for sustainable synthetic transformations, primarily based on transition metal complexes of pincer ligands. A considerable portion of these efforts has been devoted to acceptorless dehydrogenative coupling, including that of alcohols and amines through ruthenium-catalyzed reactions. These latter processes generate amides without resorting to coupling reagents and typically produce no waste, with their only byproduct being H2 gas, which is itself a valuable resource. In the present review, we chronicle our progress in this area of research since 2014. This includes the use of water and ammonia as amidation reagents, expanding the scope of amidation substrates and target amides, achieving milder reaction conditions, development of amidation-based liquid organic hydrogen carrier systems, and introduction of manganese-based catalysts.

Controlled Selectivity through Reversible Inhibition of the Catalyst: Stereodivergent Semihydrogenation of Alkynes

Catalytic semihydrogenation of internal alkynes using H₂ is an attractive atom-economical route to various alkenes, and its stereocontrol has received widespread attention, both in homogeneous and heterogeneous catalyses. Herein, a novel strategy is introduced, whereby a poisoning catalytic thiol is employed as a reversible inhibitor of a ruthenium catalyst, resulting in a controllable H₂-based semihydrogenation of internal alkynes. Both (E)- and (Z)-alkenes were obtained efficiently and highly selectively, under very mild conditions, using a single homogeneous acridine-based ruthenium pincer catalyst. Mechanistic studies indicate that the (Z)-alkene is the reaction intermediate leading to the (E)-alkene and that the addition of a catalytic amount of bidentate thiol impedes the Z/E isomerization step by forming stable ruthenium thiol(ate) complexes, while still allowing the main hydrogenation reaction to proceed. Thus, the absence or presence of catalytic thiol controls the stereoselectivity of this alkyne semihydrogenation, affording either the (E)-isomer as the final product or halting the reaction at the (Z)-intermediate. The developed system, which is also applied to the controllable isomerization of a terminal alkene, demonstrates how metal catalysis with switchable selectivity can be achieved by reversible inhibition of the catalyst with a simple auxiliary additive.

Hydrogenation of nitriles to primary amines catalyzed by an unsupported nanoporous palladium catalyst: understanding the essential reason for the high activity and selectivity of the catalyst

An efficient and highly selective heterogeneous catalyst system for nitrile hydrogenation was developed using unsupported palladium nanopores (PdNPore). The PdNPore-catalyzed selective hydrogenation of nitriles proceeded smoothly, without any additives, under mild conditions (low H₂ pressure and low temperature) to yield primary amines with satisfactory to excellent yields. Systematic studies demonstrated that the high activity and excellent selectivity of the PdNPore originated from its good Lewis acidity and porous structure. No palladium leached from the PdNPore during the hydrogenation reaction. Moreover, the catalyst was easily recovered and reused without any loss of catalytic activity. A deuterium-hydrogen exchange reaction clearly indicated that the present hydrogenation involves heterolytic H₂ splitting on the surface of the PdNPore catalyst.

Acceptorless dehydrogenative synthesis of primary amides from alcohols and ammonia

The highly desirable synthesis of the widely-used primary amides directly from alcohols and ammonia via acceptorless dehydrogenative coupling represents a clean, atom-economical, sustainable process. Nevertheless, such a reaction has not been previously reported, and the existing catalytic systems instead generate other N-containing products, e.g., amines, imines and nitriles. Herein, we demonstrate an efficient and selective ruthenium-catalyzed synthesis of primary amides from alcohols and ammonia gas, accompanied by H₂ liberation. Various aliphatic and aromatic primary amides were synthesized in high yields, with no observable N-containing byproducts. The selectivity of this system toward primary amide formation is rationalized through density functional theory (DFT) calculations, which show that dehydrogenation of the hemiaminal intermediate into primary amide is energetically favored over its dehydration into imine.

An efficient and selective synthesis of primary amides from alcohols and ammonia, with H₂ evolution, has been achieved by an unprecedented acceptorless dehydrogenative process catalyzed by a pyridine-based PNN–ruthenium pincer complex.

Sustainable catalysis with fluxional acridine-based PNP pincer complexes

Because of the widespread use of fossil fuels and the resulting global warming, development of sustainable catalytic transformations is now more important than ever to obtain our desired fuels and building materials with the least carbon footprint and waste production. Many sustainable (de)hydrogenation reactions, including CO2 reduction, H2 carrier systems, and others, have been reported using molecular pincer complexes. A specific subset of pincer complexes containing a central acridine donor with flanking CH2PR2 ligands, known as acridine-based PNP pincer complexes, exhibit special reactivities that are not imitable by other PNP pincer complexes such as pyridine-based or (R2PCH2CH2)2NH type ligands. The goal of this article is to highlight the unique reactivities of acridine-based complexes and then investigate how these reactivities allow these complexes to catalyse many sustainable reactions that traditional pincer complexes cannot catalyse. To that end, we will initially go over the synthesis and structural features of acridine complexes, such as the labile coordination of the central N donor and the observed fac-mer fluxionality. Following that, distinct reactivity patterns of acridine-based complexes including their reactivity with acids and water will be discussed. Finally, we will discuss the reaction systems that have been developed with acridine complexes thus far, including the notable selective transformations of primary alcohols to primary amines using ammonia, N-heteroaromatic synthesis from alcohols and ammonia, oxidation reactions with water with H2 liberation, development of H2 carrier systems, and others, and conclude the article with future possible directions. We hope that the systemic study presented here will aid researchers in developing further sustainable reactions based on the unique acridine-based pincer complexes.

Dehydrogenative ester synthesis from enol ethers and water with a ruthenium complex catalyzing two reactions in synergy

We report the dehydrogenative synthesis of esters from enol ethers using water as the formal oxidant, catalyzed by a newly developed ruthenium acridine-based PNP(Ph)-type complex. Mechanistic experiments and density functional theory (DFT) studies suggest that an inner-sphere stepwise coupled reaction pathway is operational instead of a more intuitive outer-sphere tandem hydration-dehydrogenation pathway.

Catalytic Furfural/5-Hydroxymethyl Furfural Oxidation to Furoic Acid/Furan-2,5-dicarboxylic Acid with H2 Production Using Alkaline Water as the Formal Oxidant

Furfural and 5-hydroxymethyl furfural (HMF) are abundantly available biomass-derived renewable chemical feedstocks, and their oxidation to furoic acid and furan-2,5-dicarboxylic acid (FDCA), respectively, is a research area with huge prospective applications in food, cosmetics, optics, and renewable polymer industries. Water-based oxidation of furfural/HMF is a lucrative approach for simultaneous generation of H2 and furoic acid/FDCA. However, this process is currently limited to (photo)electrochemical methods that can be challenging to control, improve, and scale up. Herein, we report well-defined ruthenium pincer catalysts for direct homogeneous oxidation of furfural/HMF to furoic acid/FDCA, using alkaline water as the formal oxidant while producing pure H2 as the reaction byproduct. Mechanistic studies indicate that the ruthenium complex not only catalyzes the aqueous oxidation but also actively suppresses background decomposition by facilitating initial Tishchenko coupling of substrates, which is crucial for reaction selectivity. With further improvement, this process can be used in scaled-up facilities for a simultaneous renewable building block and fuel production.

Efficient Base-Free Aqueous Reforming of Methanol Homogeneously Catalyzed by Ruthenium Exhibiting a Remarkable Acceleration by Added Catalytic Thiol

Production of H2 by methanol reforming is of particular interest due the low cost, ready availability, and high hydrogen content of methanol. However, most current methods either require very high temperatures and pressures or strongly rely on the utilization of large amounts of base. Here we report an efficient, base-free aqueous-phase reforming of methanol homogeneously catalyzed by an acridine-based ruthenium pincer complex, the activity of which was unexpectedly improved by a catalytic amount of a thiol additive. The reactivity of this system is enhanced by nearly 2 orders of magnitude upon addition of the thiol, and it can maintain activity for over 3 weeks, achieving a total H2 turnover number of over 130 000. On the basis of both experimental and computational studies, a mechanism is proposed which involves outer-sphere dehydrogenations promoted by a unique ruthenium complex with thiolate as an assisting ligand. The current system overcomes the need for added base in homogeneous methanol reforming and also highlights the unprecedented acceleration of catalytic activity of metal complexes achieved by the addition of a catalytic amount of thiol.

Access to acridones by tandem copper(I)-catalyzed electrophilic amination/Ag(I)-mediated oxidative annulation of anthranils with arylboronic acids

An efficient and practical approach for the synthesis of medicinally important acridones was developed from anthranils and commercially available arylboronic acids by a tandem copper(I)-catalyzed electrophilic amination/Ag(I)-mediated oxidative annulation strategy. This new and straightforward protocol displayed a broad substrate scope (25 examples) and high functional group tolerance. What's more, a possible mechanistic proposal was also presented.

Mechanistic Investigations of Ruthenium Catalyzed Dehydrogenative Thioester Synthesis and Thioester Hydrogenation

We have recently reported the previously unknown synthesis of thioesters by coupling thiols and alcohols (or aldehydes) with liberation of H₂, as well as the reverse hydrogenation of thioesters, catalyzed by a well-defined ruthenium acridine-9H based pincer complex. These reactions are highly selective and are not deactivated by the strongly coordinating thiols. Herein, the mechanism of this reversible transformation is investigated in detail by a combined experimental and computational (DFT) approach. We elucidate the likely pathway of the reactions, and demonstrate experimentally how hydrogen gas pressure governs selectivity toward hydrogenation or dehydrogenation. With respect to the dehydrogenative process, we discuss a competing mechanism for ester formation, which despite being thermodynamically preferable, it is kinetically inhibited due to the relatively high acidity of thiol compared to alcohol and, accordingly, the substantial difference in the relative stabilities of a ruthenium thiolate intermediate as opposed to a ruthenium alkoxide intermediate. Accordingly, various additional reaction pathways were considered and are discussed herein, including the dehydrogenative coupling of alcohol to ester and the Tischenko reaction coupling aldehyde to ester. This study should inform future green, (de)hydrogenative catalysis with thiols and other transformations catalyzed by related ruthenium pincer complexes.

Blue-light emitting aminated pectin for detecting Cu2+ ion

This research studied the chemo-sensing of low-cost aminated pectin (PE) obtained by a facile calcination under ammonia gas at temperature no higher than 175 °C without excessive use of alkaline, acid or solvents. The ammonia gas was found to replace the hydroxyl and methoxyl group, enhancing the crystallinity and solubility of the resultant pectin than those calcined in air or in 5% H₂. Though the increase of light absorption could be attributed mainly to the dehydration during calcination which caused the formation of CC double bond or aromatic ring, the N incorporation could be important to the photoluminescence (PL) emission. The PL quenching of the blue fluorescent aminated pectin showed a good linearity with the concentration of Cu²⁺, Fe³⁺ and the highest sensitivity toward Cu²⁺ among the investigated metal ions. In order to further increase the PL quenching toward Cu²⁺ and decrease the interference of Fe³⁺, a method involving H₂O₂ and ultraviolet illumination was developed to catalyze the oxidation of fluorophores on the polymer. This work provides new horizon on the modification and application of pectin in chemosensing.

Catalytic Hydrogenation of Thioesters, Thiocarbamates, and Thioamides

Direct hydrogenation of thioesters with H₂ provides a facile and waste-free method to access alcohols and thiols. However, no report of this reaction is documented, possibly because of the incompatibility of the generated thiol with typical hydrogenation catalysts. Here, we report an efficient and selective hydrogenation of thioesters. The reaction is catalyzed by an acridine-based ruthenium complex without additives. Various thioesters were fully hydrogenated to the corresponding alcohols and thiols with excellent tolerance for amide, ester, and carboxylic acid groups. Thiocarbamates and thioamides also undergo hydrogenation under similar conditions, substantially extending the application of hydrogenation of organosulfur compounds.

Catalytic Oxidative Deamination by Water with H2 Liberation

Selective oxidative deamination has long been considered to be an important but challenging transformation, although it is a common critical process in the metabolism of bioactive amino compounds. Most of the synthetic methods developed so far rely on the use of stoichiometric amounts of strong and toxic oxidants. Here we present a green and efficient method for oxidative deamination, using water as the oxidant, catalyzed by a ruthenium pincer complex. This unprecedented reaction protocol liberates hydrogen gas and avoids the use of sacrificial oxidants. A wide variety of primary amines are selectively transformed to carboxylates or ketones in good to high yields. It is noteworthy that mechanistic experiments and DFT calculations indicate that in addition to serving as the oxidant, water also plays an important role in assisting the hydrogen liberation steps involved in amine dehydrogenation.

A Simple Biosystem for the High-Yielding Cascade Conversion of Racemic Alcohols to Enantiopure Amines

The amination of racemic alcohols to produce enantiopure amines is an important green chemistry reaction for pharmaceutical manufacturing, requiring simple and efficient solutions. Herein, we report the development of a cascade biotransformation to aminate racemic alcohols. This cascade utilizes an ambidextrous alcohol dehydrogenase (ADH) to oxidize a racemic alcohol, an enantioselective transaminase (TA) to convert the ketone intermediate to chiral amine, and isopropylamine to recycle PMP and NAD⁺ cofactors via the reversed cascade reactions. The concept was proven by using an ambidextrous CpSADH-W286A engineered from (S)-enantioselective CpSADH as the first example of evolving ambidextrous ADHs, an enantioselective BmTA, and isopropylamine. A biosystem containing isopropylamine and E. coli (CpSADH-W286A/BmTA) expressing the two enzymes was developed for the amination of racemic alcohols to produce eight useful and high-value (S)-amines in 72-99 % yield and 98-99 % ee, providing with a simple and practical solution to this type of reaction.

Effects of ruthenium hydride species on primary amine synthesis by direct amination of alcohols over a heterogeneous Ru catalyst

Heterogeneously catalysed synthesis of primary amines by direct amination of alcohols with ammonia has long been an elusive goal. In contrast to reported Ru-based catalytic systems, we report that Ru-MgO/TiO2 acts as an effective heterogeneous catalyst for the direct amination of a variety of alcohols to primary amines at low temperatures of ca. 100 °C without the introduction of H2 gas. The present system could be applied to a variety of alcohols and provides an efficient synthetic route for 2,5-bis(aminomethyl)furan (BAMF), an attention-getting biomonomer. The high catalytic performance can be rationalized by the reactivity tuning of Ru-H species using MgO. Spectroscopic measurements suggest that MgO enhances the reactivity of hydride species by electron donation from MgO to Ru.

Hydrogen Transfer-Mediated Multicomponent Reaction for Direct Synthesis of Quinazolines by a Naphthyridine-Based Iridium Catalyst

Selective linkage of renewable alcohols and ammonia into functional products would not only eliminate the prepreparation steps to generate active amino agents but also help in the conservation of our finite fossil carbon resources and contribute to the reduction of CO₂ emission. Herein the development of a novel 2-(4-methoxyphenyl)-1,8-naphthyridine-based iridium (III) complex is reported, which exhibits excellent catalytic performance toward a new hydrogen transfer-mediated annulation reaction of 2-nitrobenzylic alcohols with alcohols and ammonia. The catalytic transformation proceeds with the striking features of good substrate and functional group compatibility, high step and atom efficiency, no need for additional reductants, and liberation of H₂O as the sole by-product, which endows a new platform for direct access to valuable quinazolines. Mechanistic investigations suggest that the non-coordinated N-atom in the ligand serves as a side arm to significantly promote the condensation process by hydrogen bonding.

Titanium-Catalyzed Cyano-Borrowing Reaction for the Direct Amination of Cyanohydrins with Ammonia

α-Aminonitrile was an important building block in natural products and key intermedia in organic chemistry. Herein, the direct amination of cyanohydrins with the partner of ammonia to synthesis N-unprotected α-aminonitriles is developed. The reaction proceeds via titanium-catalyzed cyano-borrowing reaction, which features high atom economy and simple operation. A broad range of ketone or aldehyde cyanohydrins was tolerated with ammonia, and the N-unprotected α-aminonitriles were synthesis with moderate to high yields under mild reaction conditions.

Ruthenium-Catalyzed Deaminative Hydrogenation of Amino Nitriles: Direct Access to 1,2-Amino Alcohols

A new approach for the efficient and highly selective synthesis of 1,2-amino alcohols by direct reductive hydrolysis of N-formyl-protected α-amino nitriles is reported. The commercially available RuHCl(CO)(PPh₃ )₃ complex was found to be a suitable catalyst for this operationally simple protocol, in which no stoichiometric amounts of undesired metal waste are generated. The deaminative hydrogenation is performed at 55 bar of H₂ , using a 6:1 mixture of 1,4-dioxane/water as solvent. In addition, hydroxymethyl alcohols were prepared from cyanoketones under very similar conditions.

Acceptorless dehydrogenative construction of CN and CC bonds through catalytic aza-Wittig and Wittig reactions in the presence of an air-stable ruthenium pincer complex

Acceptorless dehydrogenative construction of CN and CC bonds catalysed by air-stable ruthenium complexes.

Pd-CuFe Catalyst for Transfer Hydrogenation of Nitriles: Controllable Selectivity to Primary Amines and Secondary Amines

A multicomponent nanocatalyst system was fabricated for the transfer hydrogenation of nitrile compounds. This catalyst system contains palladium, copper, and iron, which are supported on the magnetite nanospheres, and the loading of palladium could be at the parts per million level. Palladium and copper contribute to the transformation of nitrile, and the product distribution highly depends on the alloying of Fe to Cu. The nitriles could be converted to primary amine by the Pd-Cu catalyst in the absence of Fe, whereas in the presence of Fe the products are secondary amines with high selectivity. This could be attributed to the electronic modulation of iron to copper. A variety of nitriles have been transformed to the corresponding primary or secondary amines with high selectivity, and the TOF reaches 2,929 hr⁻¹ for Pd. Furthermore, the catalyst could be recycled by an external magnetic field and reused five times without severe activity loss.

•

The novel transfer hydrogenation of nitriles to primary or secondary amine

•

The dosage of Pd can be reduced to 139 ppm with a TOF of 3,597 hr⁻¹

•

The selectivity of products can be easily adjusted by electronic modulation

Acceptorless Dehydrogenative Coupling Using Ammonia: Direct Synthesis of N-Heteroaromatics from Diols Catalyzed by Ruthenium

The synthesis of N-heteroaromatic compounds via an acceptorless dehydrogenative coupling process involving direct use of ammonia as the nitrogen source was explored. We report the synthesis of pyrazine derivatives from 1,2-diols and the synthesis of N-substituted pyrroles by a multicomponent dehydrogenative coupling of 1,4-diols and primary alcohols with ammonia. The acridine-based Ru-pincer complex 1 is an effective catalyst for these transformations, in which the acridine backbone is converted to an anionic dearomatized PNP-pincer ligand framework.