Programmed Pore Architectures in Modular Quaternary Metal–Organic Frameworks

A three-component hydrogen bonded framework

A porous three-component hydrogen bonded framework, 1⋅biphen⋅TP, was prepared from a tetra-amidinium component (14+) and two different dianions, benzene-1,4-dicarboxylate (terephthalate, TP2-) and biphenyl-4,4'-dicarboxylate (biphen2-). Interestingly, when the framework was prepared in ethanol/water, 1⋅biphen⋅TP forms even when an excess of either dicarboxylate is present. However, when only water is used as solvent, only two-component frameworks are formed.

Multivariate Hydrogen-Bonded Organic Frameworks with Tunable Permanent Porosities for Capture of a Mustard Gas Simulant

Precise synthesis of topologically predictable and discrete molecular crystals with permanent porosities remains a long-term challenge. Here, we report the first successful synthesis of a series of 11 isoreticular multivariate hydrogen-bonded organic frameworks (MTV-HOFs) from pyrene-based derivatives bearing -H, -CH3 , -NH2 and -F groups achieved by a shape-fitted, π-π stacking self-assembly strategy. These MTV-HOFs are single-crystalline materials composed of tecton, as verified by single-crystal diffraction, nuclear magnetic resonance (NMR) spectra, Raman spectra, water sorption isotherms and density functional theory (DFT) calculations. These MTV-HOFs exhibit tunable hydrophobicity with water uptake starting from 50 to 80 % relative humidity, by adjusting the combinations and ratios of functional groups. As a proof of application, the resulting MTV-HOFs were shown to be capable of capturing a mustard gas simulant, 2-chloroethyl ethyl sulfide (CEES) from moisture. The location of different functional groups within the pores of the MTV-HOFs leads to a synergistic effect, which resulted in a superior CEES/H2 O selectivity (up to 94 %) compared to that of the HOFs with only pure component and enhanced breakthrough performance (up to 4000 min/g) when compared to benchmark MOF materials. This work is an important advance in the synthesis of MTV-HOFs, and provides a platform for the development of porous molecular materials for numerous applications.

Stepwise construction of multi-component metal-organic frameworks

Multi-component metal-organic frameworks (MC-MOFs) are crystalline porous materials containing multiple organic ligands or mixed metals, which manifest new properties beyond the linear combination of the single component. However, the traditional one-pot synthesis method for MOFs is not always applicable for synthesizing MC-MOFs due to the competitive coordination of multiple ligands and metals. Therefore, the stepwise construction of MC-MOFs has been explored, which enables more precise control of the heterogeneity within the ordered MC-MOFs. This review provides a summary of the synthesis strategies, namely, ligand exchange, coordinative modification, covalent modification, ligand metalation, cluster metalation, and use of mixed-metal precursors, for the stepwise construction of MC-MOFs. Furthermore, we discuss the applications of MC-MOFs with ordered arrangements of multiple functionalities, focusing on gas adsorption and separation, water remediation, heterogeneous catalysis, luminescence, and chemical sensing.

Multicomponent Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are constructed from metal ions or clusters and organic linkers. Typical MOFs are rather simple, comprising just one type of joint and linker. An additional degree of structural complexity can be introduced by using multiple different components that are assembled into the same framework In the early days of MOF chemistry, conventional wisdom held that attempting to prepare frameworks starting from such a broad set of components would lead to multiple different phases. However, this review highlights how this view was mistaken and frameworks comprising multiple different components can be deliberately designed and synthesized. When coupled to structural order and periodicity, the presence of multiple components leads to exceptional functional properties that can be understood at the atomic level.

Cyclobutanedicarboxylate Metal-Organic Frameworks as a Platform for Dramatic Amplification of Pore Partition Effect

Ultrafine tuning of MOF structures at subangstrom or picometer levels can help improve separation selectivity for gases with subtle differences. However, for MOFs with a large enough pore size, the effect from ultrafine tuning on sorption can be muted. Here we show an integrative strategy that couples extreme pore compression with ultrafine pore tuning. This strategy is made possible by unique combination of two features of the partitioned acs (pacs) platform: multimodular framework and exceptional tolerance toward isoreticular replacement. Specifically, we use one module (ligand 1, L1) to shrink the pore size to an extreme minimum on pacs. A compression ratio of about 30% was achieved (based on the unit cell c/a ratio) from prototypical 1,4-benzenedicarboxylate-pacs to trans-1,3-cyclobutanedicarboxylate-pacs. This is followed by using another module (ligand 2, L2) for ultrafine pore tuning (<3% compression). This L1-L2 strategy increases the C2H2/CO2 selectivity from 2.6 to 20.8 and gives rise to an excellent experimental breakthrough performance. As the shortest cyclic dicarboxylate that mimics p-benzene-based moieties using a bioisosteric (BIS) strategy on pacs, trans-1,3-cyclobutanedicarboxylate offers new opportunities in MOF chemistry.

Redox-Active Mixed-Linker Metal-Organic Frameworks with Switchable Semiconductive Characteristics for Tailorable Chemiresistive Sensing

Metal-organic frameworks (MOFs), with diverse metal nodes and designable organic linkers, offer unique opportunities for the rational engineering of semiconducting properties. In this work, we report a mixed-linker conductive MOF system with both tetrathiafulvalene and Ni-bis(dithiolene) moieties, which allows the fine-tuning of electronic structures and semiconductive characteristics. By continuously increasing the molar ratio between tetrathiafulvalene and Ni-bis(dithiolene), the switching of the semiconducting behaviors from n-type to p-type was observed along with an increase in electrical conductivity by 3 orders of magnitude (from 2.88×10^-7  S m^-1 to 9.26×10^-5  S m^-1 ). Furthermore, mixed-linker MOFs were applied for the chemiresistive detection of volatile organic compounds (VOCs), where the sensing performance was modulated by the corresponding linker ratios, showing synergistic and nonlinear modulation effects.

Zr- and Ti-based metal-organic frameworks: synthesis, structures and catalytic applications

Recently, Zr- and Ti-based metal-organic frameworks (MOFs) have gathered increasing interest in the field of chemistry and materials science, not only for their ordered porous structure, large surface area, and high thermal and chemical stability, but also for their various potential applications. Particularly, the unique features of Zr- and Ti-based MOFs enable them to be a highly versatile platform for catalysis. Although much effort has been devoted to developing Zr- and Ti-based MOF materials, they still suffer from difficulties in targeted synthesis, especially for Ti-based MOFs. In this Feature Article, we discuss the evolution of Zr- and Ti-based MOFs, giving a brief overview of their synthesis and structures. Furthermore, the catalytic uses of Zr- and Ti-based MOF materials in the previous 3-5 years have been highlighted. Finally, perspectives on the Zr- and Ti-based MOF materials are also proposed. This work provides in-depth insight into the advances in Zr- and Ti-based MOFs and boosts their catalytic applications.

Statistical copolymer metal organic nanotubes

Metal-organic nanotubes (MONTs) are 1-dimensional crystalline porous materials that are formed from ligands and metals in a manner identical to more typical 3-dimensional metal-organic frameworks (MOFs). MONTs form anisotropically in one dimension making them excellent candidates for linker engineering for control of chemical composition and spacing. A novel series of MONTs was synthesized utilizing a mixture of 1,2,4-ditriazole ligands containing both a fully protonated aryl moiety and its tetrafluorinated analog in ratios of, 0 : 1, 1 : 4, 1 : 1, 4 : 1, and 1 : 0, respectively. All MONTs were characterized by both bulk and nanoscale measurements, including SCXRD, PXRD, ssNMR and TEM, to determine the resulting co-polymer architecture (alternating, block, or statistical) and the ligand ratios in the solid materials. All characterization methods point towards statistical copolymerization of the materials in a manner analogous to 3D MOFs, all of which notably could be achieved without destructive analytical methods.

Photoinduced Electron Transfer in Multicomponent Truxene-Quinoxaline Metal-Organic Frameworks

Metal-organic frameworks (MOFs) can respond to light in a number of interesting ways. Photochromism is observed when a structural change to the framework is induced by the absorption of light, which results in a color change. In this work, we show that introducing quinoxaline ligands to MUF-7 and MUF-77 (MUF = Massey University Framework) produces photochromic MOFs that change color from yellow to red upon the absorption of 405 nm light. This photochromism is observed only when the quinoxaline units are incorporated into the framework and not for the standalone ligands in the solid state. Electron paramagnetic resonance (EPR) spectroscopy shows that organic radicals form upon irradiation of the MOFs. The EPR signal intensities and longevity depend on the precise structural details of the ligand and framework. The photogenerated radicals are stable for long periods in the dark but can be switched back to the diamagnetic state by exposure to visible light. Single-crystal X-ray diffraction analysis reveals bond length changes upon irradiation that are consistent with electron transfer. The multicomponent nature of these frameworks allows the photochromism to emerge by allowing through-space electron transfer, precisely positioning the framework building blocks, and tolerating functional group modifications to the ligands.

Multicomponent, Functionalized HKUST-1 Analogues Assembled via Reticulation of Prefabricated Metal-Organic Polyhedral Cavities

Metal–organic frameworks (MOFs) assembled from multiple building blocks exhibit greater chemical complexity and superior functionality in practical applications. Herein, we report a new approach based on using prefabricated cavities to design isoreticular multicomponent MOFs from a known parent MOF. We demonstrate this concept with the formation of multicomponent HKUST-1 analogues, using a prefabricated cavity that comprises a cuboctahedral Rh(II) metal–organic polyhedron functionalized with 24 carboxylic acid groups. The cavities are reticulated in three dimensions via Cu(II)-paddlewheel clusters and (functionalized) 1,3,5-benzenetricarboxylate linkers to form three- and four-component HKUST-1 analogues.

Dynamic network of intermolecular interactions in metal-organic frameworks functionalized by molecular machines

Molecular machines enable external control of structural and dynamic phenomena at the atomic level. To efficiently transfer their tunable properties into designated functionalities, a detailed understanding of the impact of molecular embedding is needed. In particular, a comprehensive insight is fundamental to design hierarchical multifunctional systems that are inspired by biological cells. Here, we applied an on-the-fly trained force field to perform atomistic simulations of a systematically modified rotaxane functionalized metal-organic framework. Our atomistic studies reveal a symmetric and asymmetric interplay of the mechanically bonded rings (MBRs) within the framework depending on the local environment. As a result, their translational motion is modulated ranging from fast oscillatory behavior to cooperative and potentially directed shuttling. The derived picture of competitive interactions, which influence the operation mechanism of the MBRs embedded in these soft porous materials, promotes the development of responsive functional materials, which is a key step toward intelligent matter.

Tuning the Stereoselectivity of an Intramolecular Aldol Reaction by Precisely Modifying a Metal-Organic Framework Catalyst

We report the catalysis of an enantioselective, intramolecular aldol reaction accelerated by an organocatalyst embedded in a series of multicomponent metal‐organic frameworks. By precisely programming the pore microenvironment around the site of catalysis, we show how important features of an intramolecular aldol reaction can be tuned, such as the substrate consumption, enantioselectivity, and degree of dehydration of the products. This tunability arises from non‐covalent interactions between the reaction participants and modulator groups that occupy positions in the framework remote from the catalytic site. Further, the catalytic moiety can be switched form one framework linker to another. Deliberately building up microenvironments that can influence the outcome of reaction processes in this way is not possible in conventional homogenous catalysts but is reminiscent of enzymes.

Synthesis, Structure and Highly Selective C3H8/CH4 and C2H6/CH4 Adsorptions of a (4,8)-c Ternary flu-Metal-organic Framework based upon both [Sc4O2(COO)8] and [Cu4OCl6] Clusters

A new ternary flu topological metal-organic framework based upon the torsional cubic 8-connected [Sc4O2(COO)8] cluster and the tetrahedral 4-connected [Cu4OCl6] cluster, namely, [Sc4O2(Cu4Cl6O)2(L)8•5H2O]•xGuest (SNNU-Bai69; SNNU-Bai = Shaanxi Normal University, Bai’s...

Symmetry-Guided Synthesis of N,N'-Bicarbazole and Porphyrin-Based Mixed-Ligand Metal-Organic Frameworks: Light Harvesting and Energy Transfer

In the past decades, many attempts have been made to mimic the energy transfer (EnT) in photosynthesis, a key process occurring in nature that is of fundamental significance in solar fuels and sustainable energy. Metal-organic frameworks (MOFs), an emerging class of porous crystalline materials self-assembled from organic linkers and metal or metal cluster nodes, offer an ideal platform for the exploration of directional EnT phenomena. However, placing energy donor and acceptor moieties within the same framework with an atomistic precision appears to be a major synthesis challenge. In this work, we report the design and synthesis of a highly porous and photoactive N,N'-bicarbazole- and porphyrin-based mixed-ligand MOF, namely, NPF-500-H₂TCPP (NPF = Nebraska porous framework; H₂TCPP = meso-tetrakis(4-carboxyphenyl)porphyrin), where the secondary ligand H₂TCPP is incorporated precisely through the open metal sites of the equatorial plane of the octahedron cage resulting from the underlying (4,8) connected network of NPF-500. The efficient EnT process from N,N'-bicarbazole to porphyrin in NPF-500-H₂TCPP was captured by time-resolved spectroscopy and exemplified by photocatalytic oxidation of thioanisole. These results demonstrate not only the capability of NPF-500 as the scaffold to precisely arrange the donor-acceptor assembly for the EnT process but also the potential to directly utilize the EnT process for photocatalytic applications.

In Situ Investigation of Multicomponent MOF Crystallization during Rapid Continuous Flow Synthesis

Access to the potential applications of metal-organic frameworks (MOFs) depends on rapid fabrication. While there have been advances in the large-scale production of single-component MOFs, rapid synthesis of multicomponent MOFs presents greater challenges. Multicomponent systems subjected to rapid synthesis conditions have the opportunity to form separate kinetic phases that are each built up using just one linker. We sought to investigate whether continuous flow chemistry could be adapted to the rapid formation of multicomponent MOFs, exploring the UMCM-1 and MUF-77 series. Surprisingly, phase pure, highly crystalline multicomponent materials emerge under these conditions. To explore this, in situ WAXS was undertaken to gain an understanding of the formation mechanisms at play during flow synthesis. Key differences were found between the ternary UMCM-1 and the quaternary MUF-7, and key details about how the MOFs form were then uncovered. Counterintuitively, despite consisting of just two ligands UMCM-1 proceeds via MOF-5, whereas MUF-7 consists of three ligands but is generated directly from the reaction mixture. By taking advantage of the scalable high-quality materials produced, C6 separations were achieved in breakthrough settings.

Thermolabile Cross-Linkers for Templating Precise Multicomponent Metal-Organic Framework Pores

While a number of approaches toward multicomponent metal-organic frameworks have been reported, new strategies affording greater structural versatility and molecular precision are needed to replicate the sophisticated active sites found in enzymes. Here, we outline a general method for templating functional groups within framework pores using thermolabile ligand cross-linkers. We show that tertiary ester-based cross-linkers can be used to install well-defined carboxylic acid pairs at precise relative distances and orientations. The tertiary ester linkages remain intact during framework formation but are readily cleaved to reveal free carboxylic acids upon microwave heating. Successful cross-linker synthesis, framework incorporation, and thermolysis is demonstrated using the mesoporous, terphenyl expanded analogues of MOF-74. When short cross-linkers are used, modeling studies show that the carboxylic acids are installed in a single configuration down the pore channels, spaced ∼7 Å apart. These precisely positioned acid pairs can be used as synthetic handles to build up more complex cooperative active sites.

Organic molecular sieve membranes for chemical separations

Molecular separations that enable selective transport of target molecules from gas and liquid molecular mixtures, such as CO2 capture, olefin/paraffin separations, and organic solvent nanofiltration, represent the most energy sensitive and significant demands. Membranes are favored for molecular separations owing to the advantages of energy efficiency, simplicity, scalability, and small environmental footprint. A number of emerging microporous organic materials have displayed great potential as building blocks of molecular separation membranes, which not only integrate the rigid, engineered pore structures and desirable stability of inorganic molecular sieve membranes, but also exhibit a high degree of freedom to create chemically rich combinations/sequences. To gain a deep insight into the intrinsic connections and characteristics of these microporous organic material-based membranes, in this review, for the first time, we propose the concept of organic molecular sieve membranes (OMSMs) with a focus on the precise construction of membrane structures and efficient intensification of membrane processes. The platform chemistries, designing principles, and assembly methods for the precise construction of OMSMs are elaborated. Conventional mass transport mechanisms are analyzed based on the interactions between OMSMs and penetrate(s). Particularly, the 'STEM' guidelines of OMSMs are highlighted to guide the precise construction of OMSM structures and efficient intensification of OMSM processes. Emerging mass transport mechanisms are elucidated inspired by the phenomena and principles of the mass transport processes in the biological realm. The representative applications of OMSMs in gas and liquid molecular mixture separations are highlighted. The major challenges and brief perspectives for the fundamental science and practical applications of OMSMs are tentatively identified.

Two-Dimensional Covalent Organic Framework Solid Solutions

Covalent organic frameworks (COFs) generally leverage one or two monomers with specific sizes and shapes to access highly symmetric and periodic polymer networks. Almost all reported COFs employ the minimum sets of monomers needed for the polymerization (usually two, sometimes one) and crystallize in high-symmetry topologies. COFs synthesized from more than two monomers usually employ mixtures with different pendant functionalities to distribute these groups statistically throughout the structure, or monomers with different sizes in ratios targeting lower symmetry topologies. Here, we demonstrate that mixtures of monomers with different lengths generate single-phase, hexagonal two-dimensional covalent organic framework (2D COF) solid solutions at continuously variable feed ratios. X-ray diffraction measurements, Fourier-transform infrared spectroscopy, and Pawley refinement indicate that both monomers distribute randomly within the same lattice, and the lattice parameters continuously increase as more of the larger linker is incorporated. Furthermore, COF solid solutions are accessed directly by polymerizing a mixture of monomers but not via linker exchange from a preformed COF. As strain develops from the lattice accommodating monomers with different sizes, the nonlinear relationship between the monomer incorporation and the COF's lattice parameters suggests that bond-bending of the monomers plays a role in incorporating monomers of different lengths into the solid solutions. Solid solution formation represents a new strategy to design 2D COFs and increase their complexity. Specifically, varying the monomer composition of a given network enables many properties, such as the average pore size, to be continuously tuned between those of corresponding pure COFs.

BN-Doped Metal-Organic Frameworks: Tailoring 2D and 3D Porous Architectures through Molecular Editing of Borazines

Building on the MOF approach to prepare porous materials, herein we report the engineering of porous BN-doped materials using tricarboxylic hexaarylborazine ligands, which are laterally decorated with functional groups at the full-carbon 'inner shell'. Whilst an open porous 3D entangled structure could be obtained from the double interpenetration of two identical metal frameworks derived from the methyl substituted borazine, the chlorine-functionalised linker undergoes formation of a porous layered 2D honeycomb structure, as shown by single-crystal X-ray diffraction analysis. In this architecture, the borazine cores are rotated by 60° in alternating layers, thus generating large rhombohedral channels running perpendicular to the planes of the networks. An analogous unsubstituted full-carbon metal framework was synthesised for comparison. The resulting MOF revealed a crystalline 3D entangled porous structure, composed by three mutually interpenetrating networks, hence denser than those obtained from the borazine linkers. Their microporosity and CO2 uptake were investigated, with the porous 3D BN-MOF entangled structure exhibiting a large apparent BET specific surface area (1091 m2  g-1 ) and significant CO2 reversible adsorption (3.31 mmol g-1 ) at 1 bar and 273 K.

Isoreticular chemistry of scandium analogues of the multicomponent metal–organic framework MIL-142

MIL-142(Sc) is prepared and the limits of the isoreticular substitution of each linker type are explored and characterised by single-crystal XRD.

The state of the field: from inception to commercialization of metal–organic frameworks

We provide a brief overview of the state of the MOF field from their inception to their synthesis, potential applications, and finally, to their commercialization.

Phase selectivity and tunable photophysical nature of rare earth metal-organic frameworks of EuxY1-x-PTC (H3PTC = 2,4,6-pyridine tricarboxylic acid; x = 0-1)

Two rare earth metal-organic frameworks (MOFs), [Y2(PTC)2(H2O)2]·3H2O (Y-PTC) and [Eu2(PTC)2(H2O)5]·H2O (Eu-PTC) together with the solid solutions [Eu2xY2(1-x)(PTC)2(H2O)5]·H2O (EuxY1-x-PTC, x = 0.013-0.82), were synthesized hydrothermally, and characterized by microanalysis, IR spectroscopy, TG, powder, and single crystal X-ray diffraction techniques. Eu-PTC and Y-PTC showed different crystal structures; however, all solid solutions were isomorphic to Eu-PTC even at x = 0.013, leading to the IR spectra and TG plots of the solid solutions to be similar to those of Eu-PTC but distinct from those of Y-PTC. DFT calculations for the crystal lattice energy demonstrated that the procedure for the crystallizing nucleation of Eu-PTC occurred prior to that of Y-PTC in the reaction solution, leading to the all solid solutions being isomorphic to Eu-PTC. The solid emission spectra at ambient condition showed that Y-PTC emitted ligand-based phosphorescence at 433 nm with a quantum yield (QY) of 27.02%, while Eu-PTC and EuxY1-x-PTC (x = 0.013-0.82) emitted the characteristic luminescence of Eu3+ ions, and most solid solutions showed higher QYs than Eu-PTC; in particular, the QY of Eu0.195Y0.805-PTC was up to 29.48%, i.e., increased by 10% regarding Eu-PTC (19.86%). Interestingly, solid solutions with x = 0.013-0.395 showed excitation-wavelength-dependent luminescence, and such type of luminescence MOFs have promising applications including the areas of precise temperature, gas sensing and information encryption or anti-counterfeiting materials.

H2/CO2 separations in multicomponent metal-adeninate MOFs with multiple chemically distinct pore environments

Metal-organic frameworks constructed from multiple (≥3) components often exhibit dramatically increased structural complexity compared to their 2 component (1 metal, 1 linker) counterparts, such as multiple chemically unique pore environments and a plurality of diverse molecular diffusion pathways. This inherent complexity can be advantageous for gas separation applications. Here, we report two isoreticular multicomponent MOFs, bMOF-200 (4 components; Cu, Zn, adeninate, pyrazolate) and bMOF-201 (3 components; Zn, adeninate, pyrazolate). We describe their structures, which contain 3 unique interconnected pore environments, and we use Kohn-Sham density functional theory (DFT) along with the climbing image nudged elastic band (CI-NEB) method to predict potential H₂/CO₂ separation ability of bMOF-200. We examine the H₂/CO₂ separation performance using both column breakthrough and membrane permeation studies. bMOF-200 membranes exhibit a H₂/CO₂ separation factor of 7.9. The pore space of bMOF-201 is significantly different than bMOF-200, and one molecular diffusion pathway is occluded by coordinating charge-balancing formate and acetate anions. A consequence of this structural difference is reduced permeability to both H₂ and CO₂ and a significantly improved H₂/CO₂ separation factor of 22.2 compared to bMOF-200, which makes bMOF-201 membranes competitive with some of the best performing MOF membranes in terms of H₂/CO₂ separations.

Bivariate Metal-Organic Frameworks with Tunable Spin-Crossover Properties

In this work, pyrazine (A), aminopyrazine (B), quinoxaline (C), and 5,6,7,8-tetrahydroquinoxaline (D) have been screened out among a large number of pyrazine derivatives to construct Hofmann-type metal-organic frameworks (MOFs) Fe(L)[M(CN)₄ ] (M=Pt, Pd) with similar 3D pillared-layer structures. X-ray single-crystal diffraction reveals that the alternate linkage between M and Fe^II ions through cyano bridges forms the 2D extended metal cyanide sheets, and ligands A-D acted as vertical columns to connect the 2D sheets to give 3D pillared-layer structures. Subsequently, a series of bivariate MOFs were constructed by pairwise combination of the four ligands A-D, which were confirmed by ¹ H NMR, PXRD, FTIR, and Raman spectroscopy. The results demonstrated that ligand size and crystallization rate play a dominant role in constructing bivariate Hofmann-type MOFs. More importantly, the spin-crossover (SCO) properties of the bivariate MOFs can be finely tuned by adjusting the proportion of the two pillared ligands in the 3D Hofmann-type structures. Remarkably, the spin transition temperatures, T_c ↑ and T_c ↓ of Fe(A)_x (B)_1-x [Pt(CN)₄ ] (x=0 to 1) can be adjusted from 239 to 254 K and from 248 to 284 K, respectively. Meanwhile, the width of the hysteresis loops can be widened from 9 to 30 K. Changing Pt to Pd, the hysteresis loops of Fe(A)_x (B)_1-x [Pd(CN)₄ ] can be tuned from 9 (T_c ↑=215 K, T_c ↓=206 K) to 24 K (T_c ↑=300 K, T_c ↓=276 K). This research provides wider implications in the development of advanced bistable materials, especially in precisely regulating SCO properties.

Probing Nonuniform Adsorption in Multicomponent Metal-Organic Frameworks via Segmental Dynamics by Solid-State Nuclear Magnetic Resonance

The guest adsorption phenomena in multicomponent metal-organic frameworks (MOFs) are intricate due to their structural complexities. In this work, we studied two members of the isostructural series of MUF-77 frameworks that consist of long or short alkyl groups. The adsorption of methanol, N,N-dimethylaniline (DMA) and acridine orange (AO) in two structures of MUF-77 has been investigated. ²H solid-state nuclear magnetic resonance (SSNMR) and two-dimensional ¹H-¹³C NMR spectroscopy were used to probe the dynamics of various compartments of MUF-77. Through the analyses of dynamic behavior by SSNMR and molecular dynamics simulations, we elucidate the spatial distribution of guest molecules are nonuniform around different chemical components, in different pore structures, and across different parts of MOF lattice. In addition, we reveal that the framework flexibility of MUF-77 with short alkyl groups is reduced upon guest adsorption yet the framework flexibility of MUF-77 with long alkyl groups increases upon loading with methanol.

Thermal Elimination of Ethylene from Cyclobutyl Groups Characterized by X-ray Crystallography in a Metal-Organic Framework Matrix

Methods to synthesize and characterize aromatic molecules with vinyl substituents are sought after yet limited in the literature. Here, we introduce cyclobutyl groups into a metal-organic framework (MOF) matrix that are poised to produce ethylene upon heating. The expulsion of ethylene produces vinyl groups on an aromatic core, which are isolated by the crystalline matrix of the framework. This enables full characterization of the thermolysis by single-crystal X-ray diffraction. Further, we modify the vinyl groups by a bromine addition reaction. Importantly, the two transformations happen in a single-crystal-to-single-crystal manner without changing the overall network structure of the parent framework. New insights into the structural and synthetic chemistry of this important class of compound are generated. Installing reactive vinyl tags in materials by the high temperature thermolysis of cyclobutyl groups is a powerful strategy for altering their physicochemical characteristics.

Optimizing Multivariate Metal-Organic Frameworks for Efficient C2H2/CO2 Separation

Adsorptive separation of acetylene (C₂H₂) from carbon dioxide (CO₂) promises a practical way to produce high-purity C₂H₂ required for industrial applications. However, challenges exist in the pore environment engineering of porous materials to recognize two molecules due to their similar molecular sizes and physical properties. Herein, we report a strategy to optimize pore environments of multivariate metal-organic frameworks (MOFs) for efficient C₂H₂/CO₂ separation by tuning metal components, functionalized linkers, and terminal ligands. The optimized material UPC-200(Al)-F-BIM, constructed from Al³⁺ clusters, fluorine-functionalized organic linkers, and benzimidazole terminal ligands, demonstrated the highest separation efficiency (C₂H₂/CO₂ uptake ratio of 2.6) and highest C₂H₂ productivity among UPC-200 systems. Experimental and computational studies revealed the contribution of small pore size and polar functional groups on the C₂H₂/CO₂ selectivity and indicated the practical C₂H₂/CO₂ separation of UPC-200(Al)-F-BIM.

Tracking and Visualization of Functional Domains in Stratified Metal-Organic Frameworks Using Gold Nanoparticles

We report here a new technique for the identification and visualization of functional domains in stratified metal-organic frameworks (MOFs). The technique, namely, gold diffusion enabled domain identification, utilizes the diffusion of Au nanoparticles within MOF cavities to track and selectively stain the more Au-philic domain in an MOF particle thereby allowing direct observation of domains, determination of domain sequences, and, in certain cases, domain boundaries under transmission electron microscopy. This method is an excellent tool for studying MOF materials with complex domain hierarchy.

Modular Total Synthesis in Reticular Chemistry

The idea of modularity in organic total synthesis has promoted the construction of diverse targeted natural products by varying the building blocks and assembly sequences. Yet its utilization has been mainly limited to the synthesis of molecular compounds based on covalent bonds. In this work, we expand the conceptual scope of modular synthesis into framework materials, which bridges metal- and covalent organic frameworks (MOFs and COFs) hierarchically in reticular chemistry. While the assembly sequences are determined by the coordination or the covalent bond strengths, a modular synthesis strategy which progressively links simple building blocks into increasingly sophisticated superstructures was reported. As a result, a series of hierarchical COF-on-MOF structures with architectural intricacy were obtained through sequence-defined reactions of diverse building blocks. The tunability of spatial apportionment, compositions, and functionality was successfully managed in these framework materials. To the best of our knowledge, this is the first report on the synthesis of COF@MOF composites and also the first discovery of controlled COF alignment. This generalizable modularity strategy will not only accelerate the discovery of multicomponent framework materials by the hierarchical assembly of MOFs and COFs but also offer a predictable retrosynthetic route to smart materials with unusual tunability owing to the diverse inorganic or organic building units.

The synthesis and applications of chiral pyrrolidine functionalized metal–organic frameworks and covalent-organic frameworks

Proline based ligands show versatile functionality to construct chiral MOFs and COFs; meanwhile, the resulted frameworks are potential materials for enantioselective adsorption and asymmetric catalysis.