Iron-Catalyzed Dehydrocoupling/Dehydrogenation of Amine–Boranes

Mechanistic Insight of High-Valent First-Row Transition Metal Complexes for Dehydrogenation of Ammonia Borane

Designing an efficient and cost-effective catalyst for ammonia borane (AB) dehydrogenation remains a persistent challenge in advancing a hydrogen-based economy. Transition metal complexes, known for their C-H bond activation capabilities, have emerged as promising candidates for AB dehydrogenation. In this study, we investigated two recently synthesized C-H activation catalysts, 1 (CoIV-dinitrate complex) and 2 (NiIV-nitrate complex), and demonstrated their efficacy for AB dehydrogenation. Using density functional theory calculations and a detailed analysis, we elucidated the AB dehydrogenation mechanism of these complexes. Our results revealed that both complexes 1 and 2 can efficiently dehydrogenate AB at room temperature, although the abstraction of molecular H2 from these complexes requires slightly elevated temperatures. We utilized H2 binding free energy calculations to identify potentially active sites and observed that complex 2 can release two equivalents of H2 at a temperature slightly higher than room temperature. Furthermore, we investigated AB dehydrogenation kinetics and thermodynamics in iron (Fe)-substituted systems, complexes 3 and 4. Our results showed that the strategic alteration of the central metal atom, replacing Ni in complex 2 with Fe in complex 4, resulted in enhanced kinetics and thermodynamics for AB dehydrogenation in the initial cycle. These results underscore the potential of high-valent first-row transition metal complexes for facilitating AB dehydrogenation at room temperature. Additionally, our study highlights the beneficial impact of incorporating iron into such mononuclear systems, enhancing their catalytic activity.

Transfer semi-hydrogenation of terminal alkynes with a well-defined iron complex

The synthesis and characterization of a bis-iron(II) complex was accomplished upon treatment of a phosphine free NNN-pincer ligand (L) with FeCl2·4H2O under ambient conditions. The deep greenish colored iron(II) complex (Fe-1) was characterized by a single-crystal X-ray diffraction study along with IR spectroscopy, UV-Vis spectroscopy, mass spectrometry, and elemental analysis. The Fe-1 complex was tested for the transfer semi-hydrogenation of terminal alkynes to the corresponding alkenes through the dehydrogenation of dimethyl amine-borane. This procedure enables the conversion of various structurally different terminal alkynes to alkenes under mild conditions. Control experiments were performed to shed light on the possible intermediates generated during the present protocol.

Two active species from a single metal halide precursor: a case study of highly productive Mn-catalyzed dehydrogenation of amine-boranes via intermolecular bimetallic cooperation

Metal-metal cooperation for inert bond activation is a ubiquitous concept in coordination chemistry and catalysis. While the great majority of such transformations proceed via intramolecular mode in binuclear complexes, to date only a few examples of intermolecular small molecule activation using usually bimetallic frustrated Lewis pairs (Mδ+⋯M'δ-) have been reported. We introduce herein an alternative approach for the intermolecular bimetallic cooperativity observed in the catalytic dehydrogenation of amine-boranes, in which the concomitant activation of N-H and B-H bonds of the substrate via the synergetic action of Lewis acidic (M+) and basic hydride (M-H) metal species derived from the same mononuclear complex (M-Br). It was also demonstrated that this system generated in situ from the air-stable Mn(i) complex fac-[(CO)3(bis(NHC))MnBr] and NaBPh4 shows high activity for H2 production from several substrates (Me2NHBH3, tBuNH2BH3, MeNH2BH3, NH3BH3) at low catalyst loading (0.1% to 50 ppm), providing outstanding efficiency for Me2NHBH3 (TON up to 18 200) that is largely superior to all known 3d-, s-, p-, f-block metal derivatives and frustrated Lewis pairs (FLPs). These results represent a step forward towards more extensive use of intermolecular bimetallic cooperation concepts in modern homogeneous catalysis.

Dehydropolymerization of Amine-Boranes using Bis(imino)pyridine Rhodium Pre-Catalysis: σ-Amine-Borane Complexes, Nanoparticles, and Low Residual-Metal BN-Polymers that can be Chemically Repurposed

The sigma amine-borane complexes [Rh(L1)(η2 :η2 -H3 B⋅NRH2 )][OTf] (L1=2,6-bis-[1-(2,6-diisopropylphenylimino)ethyl]pyridine, R=Me, Et, n Pr) are described, alongside [Rh(L1)(NMeH2 )][OTf]. Using R=Me as a pre-catalyst (1 mol %) the dehydropolymerization of H3 B ⋅ NMeH2 gives [H2 BNMeH]n selectively. Added NMeH2 , or the direct use of [Rh(L1)(NMeH2 )][OTf], is required for initiation of catalysis, which is suggested to operate through the formation of a neutral hydride complex, Rh(L1)H. The formation of small (1-5 nm) nanoparticles is observed at the end of catalysis, but studies are ambiguous as to whether the catalysis is solely nanoparticle promoted or if there is a molecular homogeneous component. [Rh(L1)(NMeH2 )][OTf] is shown to operate at 0.025 mol % loadings on a 2 g scale of H3 B ⋅ NMeH2 to give polyaminoborane [H2 BNMeH]n [Mn =30,900 g/mol, Ð=1.8] that can be purified to a low residual [Rh] (6 μg/g). Addition of Na[N(SiMe3 )2 ] to [H2 BNMeH]n results in selective depolymerization to form the eee-isomer of N,N,N-trimethylcyclotriborazane [H2 BNMeH]3 : the chemical repurposing of a main-group polymer.

Substrate-Gated Transformation of a Pre-Catalyst into an Iron-Hydride Intermediate [(NO)2(CO)Fe(μ-H)Fe(CO)(NO)2]- for Catalytic Dehydrogenation of Dimethylamine Borane

Continued efforts are made on the development of earth-abundant metal catalysts for dehydrogenation/hydrolysis of amine boranes. In this study, complex [K-18-crown-6-ether][(NO)₂Fe(μ-^MePyr)(μ-CO)Fe(NO)₂] (3-K-crown, ^MePyr = 3-methylpyrazolate) was explored as a pre-catalyst for the dehydrogenation of dimethylamine borane (DMAB). Upon evolution of H_2(g) from DMAB triggered by 3-K-crown, parallel conversion of 3-K-crown into [(NO)₂Fe(N,N'-^MePyrBH₂NMe₂)]^- (5) and an iron-hydride intermediate [(NO)₂(CO)Fe(μ-H)Fe(CO)(NO)₂]^- (A) was evidenced by X-ray diffraction/nuclear magnetic resonance/infrared/nuclear resonance vibrational spectroscopy experiments and supported by density functional theory calculations. Subsequent transformation of A into complex [(NO)₂Fe(μ-CO)₂Fe(NO)₂]^- (6) is synchronized with the deactivated generation of H_2(g). Through reaction of complex [Na-18-crown-6-ether][(NO)₂Fe(η²-BH₄)] (4-Na-crown) with CO_(g) as an alternative synthetic route, isolated intermediate [Na-18-crown-6-ether][(NO)₂(CO)Fe(μ-H)Fe(CO)(NO)₂] (A-Na-crown) featuring catalytic reactivity toward dehydrogenation of DMAB supports a substrate-gated transformation of a pre-catalyst [(NO)₂Fe(μ-^MePyr)(μ-CO)Fe(NO)₂]^- (3) into the iron-hydride species A as an intermediate during the generation of H_2(g).

Synthesis of Electrophiles Derived from Dimeric Aminoboranes and Assessing Their Utility in the Borylation of π Nucleophiles

Dimeric aminoboranes, [H₂BNR₂]₂ (R = Me or CH₂CH₂) containing B₂N₂ cores, can be activated by I₂, HNTf₂ (NTf₂ = [N(SO₂CF₃)₂]), or [Ph₃C][B(C₆F₅)₄] to form isolable H₂B(μ-NR₂)₂BHX (for X = I or NTf₂). For X = [B(C₆F₅)₄]⁻ further reactivity, presumably between [H₂B(μ-NMe₂)₂BH][B(C₆F₅)₄] and aminoborane, forms a B₃N₃-based monocation containing a three-center two electron B-(μ-H)-B moiety. The structures of H₂B(μ-NMe₂)₂BH(I) and [(μ-NMe₂)BH(NTf₂)]₂ indicated a sterically crowded environment around boron, and this leads to the less common O-bound mode of NTf₂ binding. While the iodide congener reacted very slowly with alkynes, the NTf₂ analogues were more reactive, with hydroboration of internal alkynes forming (vinyl)₂BNR₂ species and R₂NBH(NTf₂) as the major products. Further studies indicated that the B₂N₂ core is maintained during the first hydroboration, and that it is during subsequent steps that B₂N₂ dissociation occurs. In the mono-boron systems, for example, ⁱPr₂NBH(NTf₂), NTf₂ is N-bound; thus, they have less steric crowding around boron relative to the B₂N₂ systems. Notably, the monoboron systems are much less reactive in alkyne hydroboration than the B₂N₂-based bis-boranes, despite the former being three coordinate at boron while the latter are four coordinate at boron. Finally, these B₂N₂ electrophiles are much more prone to dissociate into mono-borane species than pyrazabole [H₂B(μ-N₂C₃H₃)]₂ analogues, making them less useful for the directed diborylation of a single substrate.

Homogeneous Catalysis for Sustainable Energy: Hydrogen and Methanol Economies, Fuels from Biomass, and Related Topics

As the world pledges to significantly cut carbon emissions, the demand for sustainable and clean energy has now become more important than ever. This includes both production and storage of energy carriers, a majority of which involve catalytic reactions. This article reviews recent developments of homogeneous catalysts in emerging applications of sustainable energy. The most important focus has been on hydrogen storage as several efficient homogeneous catalysts have been reported recently for (de)hydrogenative transformations promising to the hydrogen economy. Another direction that has been extensively covered in this review is that of the methanol economy. Homogeneous catalysts investigated for the production of methanol from CO2, CO, and HCOOH have been discussed in detail. Moreover, catalytic processes for the production of conventional fuels (higher alkanes such as diesel, wax) from biomass or lower alkanes have also been discussed. A section has also been dedicated to the production of ethylene glycol from CO and H2 using homogeneous catalysts. Well-defined transition metal complexes, in particular, pincer complexes, have been discussed in more detail due to their high activity and well-studied mechanisms.

The Hydrogen-Storage Challenge: Nanoparticles for Metal-Catalyzed Ammonia Borane Dehydrogenation

Dihydrogen is one of the sustainable energy vectors envisioned for the future. However, the rapidly reversible and secure storage of large quantities of hydrogen is still a technological and scientific challenge. In this context, this review proposes a recent state-of-the-art on H₂ production capacities from the dehydrogenation reaction of ammonia borane (and selected related amine-boranes) as a safer solid source of H₂ by hydrolysis (or solvolysis), catalyzed by nanoparticle-based systems. The review groups the results according to the transition metals constituting the catalyst with a mention to their current cost and availability. This includes the noble metals Rh, Pd, Pt, Ru, Ag, as well as cheaper Co, Ni, Cu, and Fe. For each element, the monometallic and polymetallic structures are presented and the performances are described in terms of turnover frequency and recyclability. The structure-property links are highlighted whenever possible. It appears from all these works that the mastery of the preparation of catalysts remains a crucial point both in terms of process, and control and understanding of the electronic structures of the elaborated nanomaterials. A particular effort of the scientific community remains to be made in this multidisciplinary field with major societal stakes.

Dehydrogenation of iron amido-borane and resaturation of the imino-borane complex

We report on the first isolation and structural characterization of an iron phosphinoimino-borane complex Cp*Fe(η²-H₂B Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> NC₆H₄PPh₂) by dehydrogenation of iron amido-borane precursor Cp*Fe(η¹-H₃B–NHC₆H₄PPh₂). Significantly, regeneration of the amido-borane complex has been realized by protonation of the iron(ii) imino-borane to the amino-borane intermediate [Cp*Fe(η²-H₂B–NHC₆H₄PPh₂)]⁺ followed by hydride transfer. These new iron species are efficient catalysts for 1,2-selective transfer hydrogenation of quinolines with ammonia borane.

Dehydrogenation of an amido-borane iron complex provides an imino-borane complex. Regeneration of the amido-borane precursor was achieved by protonation of the imino-borane followed by hydride transfer to the amino-borane intermediate.

Reactions of organoplatinum complexes with dimethylamine-borane

Reactions of organoplatinum complexes with dimethylamineborane are reported.

Catalytic Dehydrogenation of Ammonia Borane Mediated by a Pt(0)/Borane Frustrated Lewis Pair: Theoretical Design

A new efficient metal-based frustrated Lewis pair constructed by (P^t Bu₃ )₂ Pt and B(C₆ F₅ )₃ was designed through density functional theory calculations for the catalytic dehydrogenation of ammonia borane (AB). The reaction was composed by the successive dehydrogenation of AB and H₂ liberation, which occurs through the cooperative functions of the Pt(0) center and the B(C₆ F₅ )₃ moiety. Two equivalents of H₂ were predicted to be liberated from each AB molecule. The generation of the second H2 is the rate-determining step, with a Gibbs energy barrier and reaction energy of 27.4 and 12.8 kcal/mol, respectively.

Impact of the Novel Z-Acceptor Ligand Bis{(ortho-diphenylphosphino)phenyl}zinc (ZnPhos) on the Formation and Reactivity of Low-Coordinate Ru(0) Centers

The preparation and reactivity with H₂ of two Ru complexes of the novel ZnPhos ligand (ZnPhos = Zn(o-C₆H₄PPh₂)₂) are described. Ru(ZnPhos)(CO)₃ (2) and Ru(ZnPhos)(IMe₄)₂ (4; IMe₄ = 1,3,4,5-tetramethylimidazol-2-ylidene) are formed directly from the reaction of Ru(PPh₃)(C₆H₄PPh₂)₂(ZnMe)₂ (1) or Ru(PPh₃)₃HCl/LiCH₂TMS/ZnMe₂ with CO and IMe₄, respectively. Structural and electronic structure analyses characterize both 2 and 4 as Ru(0) species in which Ru donates to the Z-type Zn center of the ZnPhos ligand; in 2, Ru adopts an octahedral coordination, while 4 displays square-pyramidal coordination with Zn in the axial position. Under photolytic conditions, 2 loses CO to give Ru(ZnPhos)(CO)₂ that then adds H₂ over the Ru-Zn bond to form Ru(ZnPhos)(CO)₂(μ-H)₂ (3). In contrast, 4 reacts directly with H₂ to set up an equilibrium with Ru(ZnPhos)(IMe₄)₂H₂ (5), the product of oxidative addition at the Ru center. DFT calculations rationalize these different outcomes in terms of the energies of the square-pyramidal Ru(ZnPhos)L₂ intermediates in which Zn sits in a basal site: for L = CO, this is readily accessed and allows H₂ to add across the Ru-Zn bond, but for L = IMe₄, this species is kinetically inaccessible and reaction can only occur at the Ru center. This difference is related to the strong π-acceptor ability of CO compared to IMe₄. Steric effects associated with the larger IMe₄ ligands are not significant. Species 4 can be considered as a Ru(0)L₄ species that is stabilized by the Ru→Zn interaction. As such, it is a rare example of a stable Ru(0)L₄ species devoid of strong π-acceptor ligands.

Dehydropolymerisation of Methylamine Borane and an N-Substituted Primary Amine Borane Using a PNP Fe Catalyst

Dehydropolymerisation of methylamine borane (H3 B⋅NMeH2 ) using the well-known iron amido complex [(PNP)Fe(H)(CO)] (PNP=N(CH2 CH2 PiPr2 )2 ) (1) gives poly(aminoborane)s by a chain-growth mechanism. In toluene, rapid dehydrogenation of H3 B⋅NMeH2 following first-order behaviour as a limiting case of a more general underlying Michaelis-Menten kinetics is observed, forming aminoborane H2 B=NMeH, which selectively couples to give high-molecular-weight poly(aminoborane)s (H2 BNMeH)n and only traces of borazine (HBNMe)3 by depolymerisation after full conversion. Based on a series of comparative experiments using structurally related Fe catalysts and dimethylamine borane (H3 B⋅NMe2 H) polymer formation is proposed to occur by nucleophilic chain growth as reported earlier computationally and experimentally. A silyl functionalised primary borane H3 B⋅N(CH2 SiMe3 )H2 was studied in homo- and co-dehydropolymerisation reactions to give the first examples for Si containing poly(aminoborane)s.

Boron: Its Role in Energy-Related Processes and Applications

Boron's unique position in the Periodic Table, that is, at the apex of the line separating metals and nonmetals, makes it highly versatile in chemical reactions and applications. Contemporary demand for renewable and clean energy as well as energy-efficient products has seen boron playing key roles in energy-related research, such as 1) activating and synthesizing energy-rich small molecules, 2) storing chemical and electrical energy, and 3) converting electrical energy into light. These applications are fundamentally associated with boron's unique characteristics, such as its electron-deficiency and the availability of an unoccupied p orbital, which allow the formation of a myriad of compounds with a wide range of chemical and physical properties. For example, boron's ability to achieve a full octet of electrons with four covalent bonds and a negative charge has led to the synthesis of a wide variety of borate anions of high chemical and electrochemical stability-in particular, weakly coordinating anions. This Review summarizes recent advances in the study of boron compounds for energy-related processes and applications.

Advances in Rhodium-Catalyzed Oxidative Arene Alkenylation

ConspectusAlkyl and alkenyl arenes are of substantial value in both large-scale and fine chemical processes. Billions of pounds of alkyl and alkenyl arenes are produced annually. Historically, the dominant method for synthesis of alkyl arenes is acid-catalyzed arene alkylation, and alkenyl arenes are often synthesized in a subsequent dehydrogenation step. But these methods have limitations that result from the catalytic mechanism including (1) common polyalkylation, which requires an energy intensive transalkylation process, (2) quantitative selectivity for Markovnikov products for arene alkylation using α-olefins, (3) for substituted arenes, regioselectivity that is dictated by the electronic character of the arene substituents, (4) inability to form alkenyl arenes in a single process, and (5) commonly observed slow reactivity with electron-deficient arenes. Transition-metal-catalyzed aryl-carbon coupling reactions can produce alkyl or alkenyl arenes from aryl halides. However, these reactions often generate halogenated waste and typically require a stoichiometric amount of metal-containing transmetalation reagent. Transition-metal-catalyzed arene alkylation or alkenylation that involves arene C-H activation and olefin insertion into metal-aryl bonds provides a potential alternative method to prepare alkyl or alkenylation arenes. Such reactions can circumvent carbocationic intermediates and, as a result, can overcome some of the limitations mentioned above. In particular, controlling the regioselectivity of the insertion of α-olefins into metal-aryl bonds provides a strategy to selectively synthesize anti-Markovnikov products. But, previously reported catalysts often show limited longevity and low selectivity for anti-Markovnikov products.In this Account, we present recent developments in single-step arene alkenylation using Rh catalyst precursors. The reactions are successful for unactivated hydrocarbons and exhibit unique selectivity. The catalytic production of alkenyl arenes operates via Rh-mediated aromatic C-H activation, which likely occurs by a concerted metalation-deprotonation mechanism, olefin insertion into a Rh-aryl bond, β-hydride elimination from the resulting Rh-hydrocarbon product, and net dissociation of alkenyl arene with formation of a Rh hydride. Reaction of the Rh hydride with Cu(II) oxidant completes the catalytic cycle. Although Rh nanoparticles can be formed under some conditions, mechanistic studies have revealed that soluble Rh species are likely responsible for the catalysis. These Rh catalyst precursors achieve high turnovers with >10,000 catalytic turnovers observed in some cases. Under anaerobic conditions, Cu(II) carboxylates are used as the oxidant. In some cases, aerobic recycling of Cu(II) oxidant has been demonstrated. Hence, the Rh arene alkenylation catalysis bears some similarities to Pd-catalyzed olefin oxidation (i.e., the Wacker-Hoechst process). The Rh-catalyzed arene alkenylation is compatible with some electron-deficient arenes, and they are selective for anti-Markovnikov products when using substituted olefins. Finally, when using monosubstituted arenes, consistent with a metal-mediated C-H activation process, Rh-catalyzed alkenylation of substituted arenes shows selectivity for meta- and para-alkenylation products.

Photoactivated silicon–oxygen and silicon–nitrogen heterodehydrocoupling with a commercially available iron compound

A commercially available iron readily engages in catalytic Si–O and Si–N bond formation under visible light irradiation.

A Four Coordinated Iron(II)-Digermyl Complex as an Effective Precursor for the Catalytic Dehydrogenation of Ammonia Borane

A coordinatively unsaturated iron(II)-digermyl complex, Fe[Ge(SiMe3)3]2(THF)2 (1), was synthesized in one step by the reaction of FeBr2 with 2 equiv of KGe(SiMe3)3. Complex 1 shows catalytic activity comparable to that of its silicon analogue in reduction reactions. In addition, 1 acts as an effective precursor for the catalytic dehydrogenation of ammonia borane. Catalytically active species can also be generated in situ by simple mixing of the easy-to-handle precursors FeBr2, Ge(SiMe3)4, KOtBu, and phenanthroline.

Tunable Hydrogen Release from Amine-Boranes via their Insertion into Functional Polystyrenes

Polystyrene-g-boramine random copolymers are dihydrogen reservoirs with tunable dehydrogenation temperatures, which can be adjusted by selecting the boramine content in the copolymers. They display a unique dihydrogen thermal release profile, which is a direct consequence of the insertion of the amine-boranes in a polymeric scaffold, and not from a direct modification of the electronics or sterics of the amine-borane function. Finally, the mixture of polystyrene-g-boramines with conventional NH₃ -BH₃ (borazane) allows for a direct access to organic/inorganic hybrid dihydrogen reservoirs with a maximal H₂ loading of 8 wt %. These exhibit a dehydrogenation temperature lower than that of either the borazane or the polystyrene-g-boramines taken separately.

Homo- and heterodehydrocoupling of phosphines mediated by alkali metal catalysts

Catalytic chemistry that involves the activation and transformation of main group substrates is relatively undeveloped and current examples are generally mediated by expensive transition metal species. Herein, we describe the use of inexpensive and readily available tBuOK as a catalyst for P-P and P-E (E = O, S, or N) bond formation. Catalytic quantities of tBuOK in the presence of imine, azobenzene hydrogen acceptors, or a stoichiometric amount of tBuOK with hydrazobenzene, allow efficient homodehydrocoupling of phosphines under mild conditions (e.g. 25 °C and < 5 min). Further studies demonstrate that the hydrogen acceptors play an intimate mechanistic role. We also show that our tBuOK catalysed methodology is general for the heterodehydrocoupling of phosphines with alcohols, thiols and amines to generate a range of potentially useful products containing P-O, P-S, or P-N bonds.

Amine-Borane Dehydrogenation and Transfer Hydrogenation Catalyzed by α-Diimine Cobaltates

Anionic α-diimine cobalt complexes, such as [K(thf)_1.5 {(^Dipp BIAN)Co(η⁴ -cod)}] (1; Dipp=2,6-diisopropylphenyl, cod=1,5-cyclooctadiene), catalyze the dehydrogenation of several amine-boranes. Based on the excellent catalytic properties, an especially effective transfer hydrogenation protocol for challenging olefins, imines, and N-heteroarenes was developed. NH₃ BH₃ was used as a dihydrogen surrogate, which transferred up to two equivalents of H₂ per NH₃ BH₃ . Detailed spectroscopic and mechanistic studies are presented, which document the rate determination by acidic protons in the amine-borane.

Iron Precatalysts with Bulky Tri(tert-butyl)cyclopentadienyl Ligands for the Dehydrocoupling of Dimethylamine-Borane

In an attempt to prepare new Fe catalysts for the dehydrocoupling of amine-boranes and to provide mechanistic insight, the paramagnetic Fe^II dimeric complex [Cp'FeI]₂ (1) (Cp'=η⁵ -((1,2,4-tBu)₃ C₅ H₂ )) was used as a precursor to a series of cyclopentadienyl Fe^II and Fe^III mononuclear species. The complexes prepared were [Cp'Fe(η⁶ -Tol)][Cp'FeI₂ ] (2) (Tol=C₆ H₅ Me), [Cp'Fe(η⁶ -Tol)][BAr^F₄ ] (3) (BAr^F₄ =[B(C₆ H₃ (m-CF₃ )₂ )₄ ]^- ), [N(nBu)₄ ][Cp'FeI₂ ] (4), Cp'FeI₂ (5), and [Cp'Fe(MeCN)₃ ][BAr^F₄ ] (6). The electronic structure of the [Cp'FeI₂ ]^- anion in 2 and 4 was investigated by SQUID magnetometry, EPR spectroscopy and ab initio Complete Active Space Self Consistent Field-Spin Orbit (CASSCF-SO) calculations, and the studies revealed a strongly anisotropic S=2 ground state. Complexes 1-6 were investigated as catalysts for the dehydrocoupling of Me₂ NH⋅BH₃ (I) in THF at 20 °C to yield the cyclodiborazane product [Me₂ N-BH₂ ]₂ (IV). Complexes 1-4 and 6 were active dehydrocoupling catalysts towards I (5 mol % loading), however 5 was inactive, and ultra-violet (UV) irradiation was required for the reaction mediated by 3. Complex 6 was found to be the most active precatalyst, reaching 80 % conversion to IV after 19 h at 22 °C. Dehydrocoupling of I by 1-4 proceeded via formation of the aminoborane Me₂ N=BH₂ (II) as the major intermediate, whereas for 6 the linear diborazane Me₂ NH-BH₂ -NMe₂ -BH₃ (III) could be detected, together with trace amounts of II. Reactions of 1 and 6 with Me₃ N⋅BH₃ were investigated in an attempt to identify Fe-based intermediates in the catalytic reactions. The σ-complex [Cp'Fe(MeCN)(κ² -H₂ BH⋅NMe₂ H][BAr^F₄ ] was proposed to initially form in dehydrocoupling reactions involving 6 based on ESI-MS (ESI=Electrospray Ionisation Mass Spectroscopy) and NMR spectroscopic evidence. The latter also suggests that these complexes function as precursors to iron hydrides which may be the true catalytic species.

Dehydrocoupling of dimethylamine borane by titanocene: elucidation of ten years of inconsistency between theoretical and experimental descriptions

More than ten years ago, Manners and coworkers published the first experimental study on the efficiency of titanocene to catalyze the dehydrocoupling of dimethylamine borane (DMAB, T. Clark, C. Russell and I. Manners, J. Am. Chem. Soc., 2006, 128, 9582-9583). Several experimental investigations have shown that a two-step mechanism leads to the formation of a cyclic diborazane (Me2N-BH2)2via the linear diborazane (HNMe2-BH2-NMe2-BH3). This finding stood in contradiction to the following theoretical investigations of the reaction pathway. Herein, using dispersion-corrected density functional theory (DFT-D), we propose an energetically favored reaction mechanism in perfect agreement with the experimental findings. It is shown that van der Waals interactions play a prominent role in the reaction pathway. The formation of 3-center 2-electron interactions, classical dihydrogen bonds, and non-classical dihydrogen bonds was identified with the help of topological and localized orbital approaches.

Step-growth titanium-catalysed dehydropolymerisation of amine-boranes

Precatalysts active for the dehydropolymerisation of primary amine-boranes are generally based on mid or late transition metal. We have found that the activity of the precatalyst system formed from Cp^R₂TiCl₂ and 2nBuLi towards the dehydrogenation of the secondary amine-borane Me₂NH·BH₃, to yield the cyclic diborazane [Me₂N-BH₂]₂, increases dramatically with increasing electron-donating character of the cyclopentadienyl rings (Cp^R). Application of the most active precatalyst system (Cp^R = η-C₅Me₅) to the primary amine-borane MeNH₂·BH₃ enabled the first synthesis of high molar mass poly(N-methylaminoborane), [MeNH-BH₂] _n , the BN analogue of polypropylene, by an early transition metal such as catalyst. Significantly, unlike other dehydropolymerization precatalysts for MeNH₂·BH₃ such as [Ir(POCOP)H₂], skeletal nickel, and [Rh(COD)Cl]₂, the Ti precatalyst system was also active towards a range of substrates including BzNH₂·BH₃ (Bz = benzyl) yielding high molar mass polymer. Moreover, in contrast to the late transition metal catalysed dehydropolymerisation of MeNH₂·BH₃ and also the Ziegler-Natta polymerisation of olefins, studies indicate that the Ti-catalyzed dehydropolymerization reactions proceed by a step-growth rather than a chain-growth mechanism.

The recent development of efficient Earth-abundant transition-metal nanocatalysts

Whereas noble metal compounds have long been central in catalysis, Earth-abundant metal-based catalysts have in the same time remained undeveloped. Yet the efficacy of Earth-abundant metal catalysts was already shown at the very beginning of the 20th century with the Fe-catalyzed Haber-Bosch process of ammonia synthesis and later in the Fischer-Tropsch reaction. Nanoscience has revolutionized the world of catalysis since it was observed that very small Au nanoparticles (NPs) and other noble metal NPs are extraordinarily efficient. Therefore the development of Earth-abundant metals NPs is more recent, but it has appeared necessary due to their "greenness". This review highlights catalysis by NPs of Earth-abundant transition metals that include Mn, Fe, Co, Ni, Cu, early transition metals (Ti, V, Cr, Zr, Nb and W) and their nanocomposites with emphasis on basic principles and literature reported during the last 5 years. A very large spectrum of catalytic reactions has been successfully disclosed, and catalysis has been examined for each metal starting with zero-valent metal NPs followed by oxides and other nanocomposites. The last section highlights the catalytic activities of bi- and trimetallic NPs. Indeed this later family is very promising and simultaneously benefits from increased stability, efficiency and selectivity, compared to monometallic NPs, due to synergistic substrate activation.

Iridium-catalysed dehydrocoupling of aryl phosphine-borane adducts: synthesis and characterisation of high molecular weight poly(phosphinoboranes)

The thermal dehydrogenative coupling of aryl phosphine-borane adducts with iridium complexes bearing a bis(phosphinite) pincer ligand is reported. This catalysis produces high molecular weight poly(phosphinoboranes) [ArPH-BH2]n (Ar = Ph, (p)Tol, Mes). Furthermore, we investigated the reactivity of these pincer complexes towards primary phosphines and their respective borane adducts on a stoichiometric scale.

Dehydrocoupling of dimethylamine–borane promoted by manganese(ii) m-terphenyl complexes

Low-coordinate m-terphenyl complexes are precatalysts for dehydrocoupling of dimethylamine–borane, where small changes in coordination environment effect significant mechanistic differences.

Iron Catalyzed Dehydrocoupling of Amine- and Phosphine-Boranes

Catalytic dehydrocoupling methodologies, whereby dihydrogen is released from a substrate (or intermolecularly from two substrates) is a mild and efficient method to construct main group element-main group element bonds, the products of which can be used in advanced materials, and also for the development of hydrogen storage materials. With growing interest in the potential of compounds such as ammonia-borane to act as hydrogen storage materials which contain a high weight% of H2, along with the current heightened interest in base metal catalyzed processes, this review covers recent developments in amine and phosphine dehydrocoupling catalyzed by iron complexes. The complexes employed, products formed and mechanistic proposals will be discussed.