Specific Ion Effects in Amphiphile Hydration and Interface Stabilization

X-ray Induced Cycling of Rare-Earth Elements between Bulk and Interfacial Liquid

Reversible cycling of rare-earth elements between an aqueous electrolyte solution and its free surface is achieved by X-ray exposure. This exposure alters the competitive equilibrium between lanthanide ions bound to a chelating ligand, diethylenetriamine pentaacetic acid (DTPA), in the bulk solution and to insoluble monolayers of extractant di-hexadecyl phosphoric acid (DHDP) at its surface. Evidence for the exposure-induced temporal variations in the lanthanide surface density is provided by X-ray fluorescence near total reflection measurements. Comparison of results when X-rays are confined to the aqueous surface region to results when X-rays transmit into the bulk solution suggests the importance of aqueous radiolysis in the adsorption cycle. Amine binding sites in DTPA are identified as a likely target of radiolysis products. The molecules DTPA and DHDP are like those used in the separation of lanthanides from ores and in the reprocessing of nuclear fuel. These results suggest that an external source of X-rays can be used to drive rare-earth element separations. More generally, use of X-rays to controllably dose a liquid interface with lanthanides could trigger a range of interfacial processes, including enhanced metal ion extraction, catalysis, and materials synthesis.

Hofmeister Effects in Supramolecular Chemistry for Anion-Modulation to Stabilize Zn Anode

Aqueous Zn-ion batteries (AZIBs) are considered as promising candidates for the next-generation large-scale energy storage, which, however, is facing the challenge of instable Zn anodes. The anion is pivotal in the stability of anodes, which are not being paid enough attention to. Herein, the modulation of anions is reported using the Hofmeister series in supramolecular chemistry to boost the stability of Zn anodes. It is found that the right-side anions in the Hofmeister series (e.g., OTf-) can enhance the Zn2+ transference number, increase the Coulombic efficiency, facilitate uniform Zn deposition, reduce the freezing point of electrolytes, and thereby stabilize the Zn anodes. More importantly, the right-side anions can form strong interaction with β-cyclodextrin (β-CD) compared to the left-side anions, and hence the addition of β-CD can further enhance the stability of Zn anodes in OTf--based electrolytes, showing enhancement of cycling lifespan in the Zn//Zn symmetric cells more than 45.5 times with β-CD compared with those without β-CD. On the contrary, the left-side anions show worse rate performance after the addition of β-CD. These results provide an effective and novel approach for choosing anions and matching additives to stabilize the anodes and achieve high-performance AZIBs through the Hofmeister effect.

Lead (II) ions enable the ion-specific effects of monovalent anions on the molecular structure and interactions at silica/aqueous interfaces

HYPOTHESIS

The adsorption of heavy metal ions such as Pb(II) onto negatively charged minerals such as silica is expected to alter the structure and the interactions at the silica/aqueous interfaces. Besides the solution pH, the inner-sphere sorption of Pb(II) is expected to regulate the surface charge/potential, hypothesized to control the actions of monovalent anions in the aqueous environment. These complex pictures can be probed directly using surface-sensitive sum-frequency generation (SFG) spectroscopy.

EXPERIMENTS

The pH-dependent water structure within the double layer at silica/aqueous interfaces under the influence of different ions was examined using SFG. The recorded SFG spectra were deconvoluted into the Stern layer (SL) and diffuse layer (DL) using the maximum entropy method in conjunction with the electrical double-layer theory.

FINDINGS

Standalone monovalent sodium salts do not exhibit ion-specific effects on the silica/aqueous interfaces. However, the mixture of Pb(II) species and each of these salts display profound ion-specific effects on the structure of silica/aqueous interfaces, indicating the role of Pb(II) as an enabler of the ion-specificity of the investigated monovalent anions. The interesting effect arises from a complex interplay between the physical processes (i.e., electrostatic interactions, screening effects, etc.) and chemical processes such as the hydrolysis of Pb(II) ions, ion complexation, protonation and deprotonation of the surface silanol group.

Liposomes and Lipid Droplets Display a Reversal of Charge-Induced Hydration Asymmetry

The unique properties of water are critical for life. Water molecules have been reported to hydrate cations and anions asymmetrically in bulk water, being a key element in the balance of biochemical interactions. We show here that this behavior extends to charged lipid nanoscale interfaces. Charge hydration asymmetry was investigated by using nonlinear light scattering methods on lipid nanodroplets and liposomes. Nanodroplets covered with negatively charged lipids induce strong water ordering, while droplets covered with positively charged lipids induce negligible water ordering. Surprisingly, this charge-induced hydration asymmetry is reversed around liposomes. This opposite behavior in charge hydration asymmetry is caused by a delicate balance of electrostatic and hydrogen-bonding interactions. These findings highlight the importance of not only the charge state but also the specific distribution of neutral and charged lipids in cellular membranes.

Layer-by-layer assembly of polyelectrolytes on hydrophobic particles in aqueous milieu for efficient dye removal

Layer-by-layer assembly of strong polyelectrolytes was successfully implemented on hydrophobic particles in degassed saline water thanks to de-gassing-reduced hydrophobic interactions and salinity-reduced hydration. The resulting polyelectrolyte multilayer coated particles were readily converted to hydrophobic yolk/hydrophilic shell particles for the removal of organic dyes from water via both electrostatic and hydrophobic interactions.

Interfacial Inversion, Interference, and IR Absorption in Vibrational Sum Frequency Scattering Experiments

Molecular interfacial structure greatly determines the properties of nano- and microscale systems. Vibrational sum frequency scattering (SFS) spectroscopy is a unique interface-selective tool to measure the interfacial vibrational spectrum of sub-micron to micron-scale objects dispersed in liquid and solid media. The interfacial structure is extracted from the interfacial susceptibility, a physical property derived from the intensity. Here, we describe the effect of infrared absorption that occurs in a bulk medium that is spectroscopically complex and use the results to investigate the effects of interfacial inversion, interfacial interference, and interfacial interference combined with absorption. We use the same three chemicals to do so, hexadecane oil, water, and a neutral Span80 surfactant. For all cases, the effective surface susceptibility can be retrieved from the intensity. We further find that inverting the phases results in different interfacial structures, even though they are composed of the same three chemicals, and explain this in terms of the different interactions that are necessary to stabilize the drops: steric stabilization for water drops in oil vs. charge stabilization for oil drops in water. Interfacial interference can be used to estimate the surface density of different compounds.

Proton Migration on Top of Charged Membranes

Proton relay between interfacial water molecules allows rapid two-dimensional diffusion. An energy barrier, ΔGr‡, opposes proton-surface-to-bulk release. The ΔGr‡-regulating mechanism thus far has remained unknown. Here, we explored the effect interfacial charges have on ΔGr‡'s enthalpic and entropic constituents, ΔGH‡ and ΔGS‡, respectively. A light flash illuminating a micrometer-sized membrane patch of a free-standing planar lipid bilayer released protons from an adsorbed hydrophobic caged compound. A lipid-anchored pH-sensitive dye reported protons' arrival at a distant membrane patch. Introducing net-negative charges to the bilayer doubled ΔGH‡, while positive net charges decreased ΔGH‡. The accompanying variations in ΔGS‡ compensated for the ΔGH‡ modifications so that ΔGr‡ was nearly constant. The increase in the entropic component of the barrier is most likely due to the lower number and strength of hydrogen bonds known to be formed by positively charged residues as compared to negatively charged moieties. The resulting high ΔGr‡ ensured interfacial proton diffusion for all measured membranes. The observation indicates that the variation in membrane surface charge alone is a poor regulator of proton traffic along the membrane surface.

Boosting Catalytic Selectivity through a Precise Spatial Control of Catalysts at Pickering Droplet Interfaces

Exploration of new methodologies to tune catalytic selectivity is a long-sought goal in catalytic community. In this work, oil-water interfaces of Pickering emulsions are developed to effectively regulate catalytic selectivity of hydrogenation reactions, which was achieved via a precise control of the spatial distribution of metal nanoparticles at the droplet interfaces. It was found that Pd nanoparticles located in the inner interfacial layer of Pickering droplets exhibited a significantly enhanced selectivity for p-chloroaniline (up to 99.6%) in the hydrogenation of p-chloronitrobenzene in comparison to those in the outer interfacial layer (63.6%) in pure water (68.5%) or in pure organic solvents (46.8%). Experimental and theoretical investigations indicated that such a remarkable interfacial microregion-dependent catalytic selectivity was attributed to the microenvironments of the coexistence of water and organic solvent at the droplet interfaces, which could provide unique interfacial hydrogen-bonding interactions and solvation effects so as to alter the adsorption patterns of p-chloronitrobenzene and p-chloroaniline on the Pd nanoparticles, thereby avoiding the unwanted contact of C-Cl bonds with the metal surfaces. Our strategy of precise spatial control of catalysts at liquid-liquid interfaces and the unprecedented interfacial effect reported here not only provide new insights into the liquid-liquid interfacial reactions but also open an avenue to boost catalytic selectivity.

Spectroscopic Studies of Zwitterionic DDAPS at Planar and Droplet Oil/Water Interfaces

Developing the knowledge on surfactant interfacial phenomena is highly valuable for the advancement of technological, commercial, and industrial products, as these applications often rely on interfacial and colloidal chemistry. Zwitterionic surfactants are a less toxic alternative to standard charged surfactants. With both positively charged quaternary ammonium and negatively charged sulfonate constituents, zwitterionic DDAPS can have diverse interfacial interactions with various coadditives. In this work, we investigate DDAPS adsorption to a planar oil/water interface and its stabilization of oil-in-water nanoemulsions. By studying both interfacial geometries with surface-specific, nonlinear spectroscopy, we gain deeper insights and a molecular perspective into DDAPS's behavior in the presence of various salts and cosurfactants. From an application standpoint, zwitterionic surfactants are often mixed with other chemicals or used in an environment with pre-existing chemicals (e.g., ocean water during oil remediation). Thus, it is important to understand how such coadditives alter DDAPS's behavior and its performance as an emulsifier. Our results show that DDAPS is nearly uninfluenced by coadditives at a planar oil/water interface, but the identical coadditives are crucial for DDAPS to form and stabilize nanoemulsions. Additionally, the surfactant packing properties vary between interfaces as well as coadditives, indicating that certain interactions with the DDAPS headgroup are stronger and play a greater role in tuning DDAPS's interfacial behavior.

Ultrasensitive Label-Free Detection of Protein-Membrane Interaction Exemplified by Toxin-Liposome Insertion

Measuring the high-affinity binding of proteins to liposome membranes remains a challenge. Here, we show an ultrasensitive and direct detection of protein binding to liposome membranes using high throughput second harmonic scattering (SHS). Perfringolysin O (PFO), a pore-forming toxin, with a highly membrane selective insertion into cholesterol-rich membranes is used. PFO inserts only into liposomes with a cholesterol concentration >30%. Twenty mole-percent cholesterol results in neither SHS-signal deviation nor pore formation as seen by cryo-electron microscopy of PFO and liposomes. PFO inserts into cholesterol-rich membranes of large unilamellar vesicles in an aqueous solution with K_d = (1.5 ± 0.2) × 10^-12 M. Our results demonstrate a promising approach to probe protein-membrane interactions below sub-picomolar concentrations in a label-free and noninvasive manner on 3D systems. More importantly, the volume of protein sample is ultrasmall (<10 μL). These findings enable the detection of low-abundance proteins and their interaction with membranes.

Ion Pairing and Molecular Orientation at Liquid/Liquid Interfaces: Self-Assembly and Function

Molecular orientation plays a pivotal role in defining the functionality and chemistry of interfaces, yet accurate measurements probing this important feature are few, due, in part, to technical and analytical limitations in extracting information from molecular monolayers. For example, buried liquid/liquid interfaces, where a complex and poorly understood balance of inter- and intramolecular interactions impart structural constraints that facilitate the formation of supramolecular assemblies capable of new functions, are difficult to probe experimentally. Here, we use vibrational sum-frequency generation spectroscopy, numerical polarization analysis, and atomistic molecular dynamics simulations to probe molecular orientations at buried oil/aqueous interfaces decorated with amphiphilic oligomers. We show that the orientation of self-assembled oligomers changes upon the addition of salts in the aqueous phase. The evolution of these structures can be described by competitive ion effects in the aqueous phase altering the orientations of the tails extending into the oil phase. These specific anionic effects occur via interfacial ion pairing and associated changes in interfacial solvation and hydrogen-bonding networks. These findings provide more quantitative insight into orientational changes encountered during self-assembly and pave the way for the design of functional interfaces for chemical separations, neuromorphic computing applications, and related biomimetic systems.

Charge transfer across C-H⋅⋅⋅O hydrogen bonds stabilizes oil droplets in water

[Figure: see text].

Lipid Melting Transitions Involve Structural Redistribution of Interfacial Water

Morphological and gel-to-liquid phase transitions of lipid membranes are generally considered to primarily depend on the structural motifs in the hydrophobic core of the bilayer. Structural changes in the aqueous headgroup phase are typically not considered, primarily because they are difficult to quantify. Here, we investigate structural changes of the hydration shells around large unilamellar vesicles (LUVs) in aqueous solution, using differential scanning calorimetry (DSC), and temperature-dependent ζ-potential and high-throughput angle-resolved second harmonic scattering measurements (AR-SHS). Varying the lipid composition from 1,2-dimyristoyl-sn-glycero-3-phosphocholine(DMPC) to 1,2-dimyristoyl-sn-glycero-3-phosphate (DMPA), to 1,2-dimyristoyl-sn-glycero-3-phospho-l-serine (DMPS), we observe surprisingly distinct behavior for the different systems that depend on the chemical composition of the hydrated headgroups. These differences involve changes in hydration following temperature-induced counterion redistribution, or changes in hydration following headgroup reorientation and Stern layer compression.

Interfacial Steric and Molecular Bonding Effects Contributing to the Stability of Neutrally Charged Nanoemulsions

In cosmetic, pharmaceutical, and food applications, many active ingredients have limited bioavailability in an aqueous environment, and in that context, nanoemulsions provide a mechanism for encapsulation, protection, and transport. These dispersed oil droplets are on the order of 100s of nanometers in diameter and owe their long-term stability to emulsifiers that are commonly charged. More recently, applications have been utilizing nonionic species as stabilizing agents due to their enhanced biosafety. DLVO (named after Derjaguin, Landau, Verwey, and Overbeek) theory has been central in the description of colloid stability, which emphasizes repulsive electrostatic forces, while extended DLVO theory also accounts for steric effects. Past studies of nanoemulsions have largely employed charged surfactants and polyelectrolytes, making it difficult to decouple electrostatic and steric effects as they relate to droplet stability. To better understand steric and molecular factors contributing to the stability of "uncharged" droplets, we have created nanoemulsions with sodium dodecyl sulfate (SDS) and poly(N-vinylacetamide) (PNVA). Though SDS is anionic, with PNVA coating the droplet surfaces, the ζ-potentials of these nanoemulsions are ∼0 mV. Despite minimizing electrostatic contributions, these nanoemulsions are stable for upward of a month with interesting dynamics. By employing dynamic light scattering, vibrational sum frequency scattering spectroscopy, and calculating interaction pair potentials using extended DLVO theory, we learn that the thickness of the PNVA layer plays a critical role in stabilizing these "uncharged" nanoemulsions. Beyond the sterics, the molecular conformation of the PNVA strands also contributes to the droplet stability. The adsorbed PNVA strands are shown to form stratified, rigid polymer networks that prevent the nanoemulsions from rapid destabilization.

Contribution of Different Molecules and Moieties to the Surface Tension in Aqueous Surfactant Solutions. II: Role of the Size and Charge Sign of the Counterions

Understanding the role of the counterion species in surfactant solutions is a complicated task, made harder by the fact that, experimentally, it is not possible to vary independently bulk and surface quantities. Here, we perform molecular dynamics simulations at constant surface coverage of the liquid/vapor interface of lithium, sodium, potassium, rubidium, and cesium dodecyl sulfate aqueous solutions. We investigate the effect of counterion type and charge sign on the surface tension of the solution, analyzing the contribution of different species and moieties to the lateral pressure profile. The observed trends are qualitatively compatible with the Hofmeister series, with the notable exception of sodium. We point out a possible shortcoming of what is at the moment, in our experience, the most realistic nonpolarizable force field (CHARMM36) that includes the parametrization for the whole series of alkali counterions. In the artificial system where the counterion and surfactant charges are inverted in sign, the counterions become considerably harder. This charge inversion changes considerably the surface tension contributions of the counterions, surfactant headgroups, and water molecules, stressing the key role of the hardness of the counterions in this respect. However, the hydration free energy gain of the counterions, occurring upon charge inversion, is compensated by the concomitant free energy loss of the headgroups and water molecules, leading to a negligible change in the surface tension of the entire system.

Effects of Salt-Induced Charge Screening on AOT Adsorption to the Planar and Nanoemulsion Oil-Water Interfaces

Nanoemulsions, nanosized droplets of oil, are easily stabilized by interfacial electric fields from the adsorption of ionic surfactants. While mean-field theories can be used to describe the impact of these interfacial fields on droplet stability, the influence of these fields on the adsorption properties of ionic surfactants is not well-understood. In this work, we study the adsorption of the surfactant sodium dioctyl sulfosuccinate (AOT) at the nanoemulsion and planar oil-water interfaces and investigate how salt-induced charge-screening affects AOT adsorption. In the absence of salt, vibrational sum-frequency scattering spectroscopy measurements reveal the ΔG_ads and the maximum surface density is the same for AOT at the hexadecane nanoemulsion surface as at the planar hexadecane-H₂O interface. Upon the addition of NaCl, an increase in AOT surface density is detected at both interfaces, indicating that repulsive electrostatic interactions between AOT monomers are the dominant force limiting surfactant adsorption at both interfaces. The bulky alkyl chains of AOT molecules cause our observations in this study to differ from those found in previous studies investigating the adsorption of linear-chain ionic surfactants to the nanoemulsion surface. These results provide necessary information for understanding factors limiting the adsorption of ionic surfactants to nanodroplet surfaces and highlight the need for further studies into the adsorption properties of more complex macromolecules at nanoemulsion surfaces.

Hydration Shell Changes in Surfactant Aggregate Transitions Revealed by Raman-MCR Spectroscopy

Hydration states of many self-assemblies directly relate to their structures and functions. Here, we use Raman multivariate curve resolution (Raman-MCR) assisted by differential scanning calorimetry and nuclear magnetic resonance to explore the hydration properties of aggregates formed by three cationic ammonium surfactants, trimethylene-1,3-bis(dodecyldimethylammonium bromide) (12-3-12(Br)₂), didodecyldimethylammonium bromide (DDAB), and dodecyltrimethylammonium bromide (DTAB). For 12-3-12(Br)₂, the transitions from spherical to rodlike and wormlike micelles lead to about 20% and 60% dehydration and gradually weaken water tetrahedral order and H-bond in hydration shells for both headgroup and hydrophobic chain. As to DDAB, unilamellar vesicles contain two kinds of hydration water species, but multicompartment vesicles exhibit decreased water order and weaker H-bond. DTAB only forms spherical micelles and its hydration structure is similar to that of the 12-3-12(Br)₂ spherical micelles. This work provides a basis to explore the hydration states of complex biological self-assemblies.

Counterion-Dictated Self-Cleaning Behavior of Polycation Coating upon Water Action: Macroscopic Dissection of Hydration of Anions

The counterions of polydiallyldimethylammonium (PDADMA) coatings were altered by incubation in aqueous solutions of different electrolytes. Oil de-wetting on the resulting polycationic surfaces upon water action exhibited a straightforward connection with the Jones-Dole viscosity B-coefficient (Bη) sign of surface counteranions. Upon water action, surface counteranions with negative Bη render PDADMA coatings oil-adhering, but those with positive Bη furnish PDADMA coatings with excellent self-cleaning. The oil-adhering PDADMA surfaces can become self-cleaning upon water action in response to the Bη of surface counteranions sign-switching with increasing water temperature. Courtesy of surface counter-anions with Bη>0, self-cleaning PDADMA coatings enable not only conversion of conventional meshes into self-cleaning membranes for oil/water separation, but also regioselective maneuver of oil flow on polycationic surfaces according to the Bη sign of surface counteranions patterned atop.

Self-Assembly at Water Nanodroplet Interfaces Quantified with Nonlinear Light Scattering

The interfaces of water micro- and nanodroplets drive environmental, medical, catalytic, biological, and chemical biphasic processes. The interfacial droplet structure and electrostatics greatly determine the reactivity and efficiency of these processes. Droplet interfacial properties are elusive and generally inferred from bulk measurements and are therefore anything but exact. Here, we quantify the interfacial ordering of water and the electrostatic surface potential of nanoscale water droplets in an apolar liquid using angle-resolved polarimetric second-harmonic scattering. We also present a method to determine the amount of free charges in the hydrophobic phase, reaching a sensitivity that is 3 orders of magnitude better than conductivity measurements. Investigating the structural and surface electrostatic changes induced by AOT surfactant adsorption, we find that both the hydrogen bonding as well as the electrostatics strongly depend on the surfactant concentration. Above the critical micelle concentration, the interface mediates micelle self-assembly.

Probing the Molecular Structure of Coadsorbed Polyethylenimine and Charged Surfactants at the Nanoemulsion Droplet Surface

Nanoemulsions, nanoscale oil droplets dispersed in an aqueous medium, can be stabilized by polymer-surfactant (PS) mixtures, making them ubiquitous in commercial, industrial, and pharmaceutical applications. It is well-known that the presence of PS layers coadsorbed at the droplet surface plays a significant role in droplet stability and functionality; however, little is understood about the molecular nature of this coadsorption. Such insights are especially important for application in drug delivery where physiological conditions can vary the environmental pH and significantly impact stabilization. Hence, the focus of this study examines the surface properties of ∼300 nm nanoemulsions stabilized by the coadsorption of polyethylenimine (PEI) and charged alkyl surfactants sodium dodecyl sulfate (SDS) and dodecyltrimethylammonium bromide (DTAB). PEI is a common charge-tunable polymer used in nanocarrier templates. This study employs vibrational sum frequency scattering spectroscopy, coupled with ζ-potential and surface pressure measurements performed as a function of varying concentrations and pH. The surface specific spectroscopic results reported herein reveal that PEI adsorption and molecular ordering is influenced by both electrostatic and hydrophobic interactions. While the degree of PEI adsorption is stronger in the presence of anionic SDS than cationic DTAB, for both surfactants, PEI is molecularly disordered in acidic conditions and adopts a persistent net ordering as the solution pH becomes more basic. Both surfactants also display degrees of interfacial conformational ordering that is altered by the presence of the coadsorbed polymer. These results demonstrate the molecular-level diversity in PEI behavior at the droplet interface and provide insight into how such behavior can be controlled to yield nanocarrier technology with specific functions and enhanced efficacy.

Hydrogen-Bond-Driven Chemical Separations: Elucidating the Interfacial Steps of Self-Assembly in Solvent Extraction

Chemical separations, particularly liquid extractions, are pervasive in academic and industrial laboratories, yet a mechanistic understanding of the events governing their function are obscured by interfacial phenomena that are notoriously difficult to measure. In this work, we investigate the fundamental steps of ligand self-assembly as driven by changes in the interfacial H-bonding network using vibrational sum frequency generation. Our results show how the bulk pH modulates the interfacial structure of extractants at the buried oil/aqueous interface via the formation of unique H-bonding networks that order and bridge ligands to produce self-assembled aggregates. These extended H-bonded structures are key to the subsequent extraction of Co²⁺ from the aqueous phase in promoting micelle formation and subsequent ejection of the said micelle into the oil phase. The combination of static and time-resolved measurements reveals the events underlying complexities of liquid extractions at high [Co²⁺]:[ligand] ratios by showing an evolution of interfacially assembled structures that are readily tuned on a chemical basis by altering the compositions of the aqueous phase. The results of this work point to new principles to design-applied separations through the manipulation of surface charge, electrostatic screening, and the associated H-bonding networks that arise at the interface to facilitate organization and subsequent extraction.

Role of the Counterions in the Surface Tension of Aqueous Surfactant Solutions. A Computer Simulation Study of Alkali Dodecyl Sulfate Systems

We have investigated the surface tension contributions of the counterions, surfactant headgroups and tails, and water molecules in aqueous alkali dodecyl sulfate (DS) solutions close to the saturated surface concentration by analyzing the lateral pressure profile contribution of these components using molecular dynamics simulations. For this purpose, we have used the combination of two popular force fields, namely KBFF for the counterions and GROMOS96 for the surfactant, which are both parameterized for the SPC/E water model. Except for the system containing Na+ counterions, the surface tension of the surfactant solutions has turned out to be larger rather than smaller than that of neat water, showing a severe shortcoming of the combination of the two force fields. We have traced back this failure of the potential model combination to the unphysically strong attraction of the KBFF counterions, except for Na+, to the anionic head of the surfactants. Despite this failure of the model, we have observed a clear relation between the soft/hard character (in the sense of the Hofmeister series) and the surface tension contribution of the counterions, which, given the above limitations of the model, can only be regarded as an indicative result. We emphasize that the obtained results, although in a twisted way, clearly stress the crucial role the counterions of ionic surfactants play in determining the surface tension of the aqueous surfactant solutions.

Insight into the Mechanisms Driving the Self-Assembly of Functional Interfaces: Moving from Lipids to Charged Amphiphilic Oligomers

Polymer-stabilized liquid/liquid interfaces are an important and growing class of bioinspired materials that combine the structural and functional capabilities of advanced synthetic materials with naturally evolved biophysical systems. These platforms have the potential to serve as selective membranes for chemical separations and molecular sequencers and to even mimic neuromorphic computing elements. Despite the diversity in function, basic insight into the assembly of well-defined amphiphilic polymers to form functional structures remains elusive, which hinders the continued development of these technologies. In this work, we provide new mechanistic insight into the assembly of an amphiphilic polymer-stabilized oil/aqueous interface, in which the headgroups consist of positively charged methylimidazolium ionic liquids, and the tails are short, monodisperse oligodimethylsiloxanes covalently attached to the headgroups. We demonstrate using vibrational sum frequency generation spectroscopy and pendant drop tensiometery that the composition of the bulk aqueous phase, particularly the ionic strength, dictates the kinetics and structures of the amphiphiles in the organic phase as they decorate the interface. These results show that H-bonding and electrostatic interactions taking place in the aqueous phase bias the grafted oligomer conformations that are adopted in the neighboring oil phase. The kinetics of self-assembly were ionic strength dependent and found to be surprisingly slow, being composed of distinct regimes where molecules adsorb and reorient on relatively fast time scales, but where conformational sampling and frustrated packing takes place over longer time scales. These results set the stage for understanding related chemical phenomena of bioinspired materials in diverse technological and fundamental scientific fields and provide a solid physical foundation on which to design new functional interfaces.

Particle adsorption at the oil-water interface studied with second harmonic generation

In this work, energetics of the adsorption of polystyrene nanoparticles at the hexadecane-water interface was studied with second harmonic generation. The adsorption of positively and negatively charged nanoparticles at the oil-water interface induced a decrease and an increase in the SHG emission from the interface, respectively. This change in the SHG emission, which is similar to that upon the adsorption of ionic surfactants at the hexadecane-water interface, which we reported previously, was then used as an indicator of particle adsorption at the interface. The adsorption free energies of the particles with a diameter of 20 nm at the hexadecane-water interface were found to be -14.7 ± 0.5 kcal mol^-1, -14.4 ± 0.4 kcal mol^-1 and -15.1 ± 0.3 kcal mol^-1 for the amidine, carboxyl and sulfate latex beads, respectively. This result implied that the van der Waals interaction between the oil phase and the polystyrene particles is capable of driving negatively charged particles to the negatively charged hexadecane-water interface. The principle of like dissolves like played a major role in the adsorption of polystyrene particles from the aqueous phase to the oil-water interface. The origin of the SHG emission from the oil-water interface was also discussed.

Hydration-Shell Vibrational Spectroscopy

Hydration-shell vibrational spectroscopy provides an experimental window into solute-induced water structure changes that mediate aqueous folding, binding, and self-assembly. Decomposition of measured Raman and infrared (IR) spectra of aqueous solutions using multivariate curve resolution (MCR) and related methods may be used to obtain solute-correlated spectra revealing solute-induced perturbations of water structure, such as changes in water hydrogen-bond strength, tetrahedral order, and the presence of dangling (non-hydrogen-bonded) OH groups. More generally, vibrational-MCR may be applied to both aqueous and nonaqueous solutions, including multicomponent mixtures, to quantify solvent-mediated interactions between oily, polar, and ionic solutes, in both dilute and crowded fluids. Combining vibrational-MCR with emerging theoretical modeling strategies promises synergetic advances in the predictive understanding of multiscale self-assembly processes of both biological and technological interest.

Formation and surface-stabilizing contributions to bare nanoemulsions created with negligible surface charge

The stabilization of nanoemulsions, nanosized oil droplets dispersed in water, is commonly achieved through the addition of surfactants and polymers. However, nanoemulsions in the absence of emulsifiers have been observed to acquire a significant negative charge at their surface, which ultimately contributes to their stability. While the source of this negative charge is disputed to this day, its presence is taken as an inherent property of the aqueous-hydrophobic interface. This report provides a look at the molecular structure and bonding characteristics of bare aqueous-hydrophobic nanoemulsion interfaces. We report the creation of bare nanoemulsions with near zero surface charge, which are marginally stable for several days. The process of creating these low-charge nanoemulsions (LCNEs) required rigorous cleaning procedures and proper solvent storage conditions. Using vibrational sum-frequency scattering spectroscopy, we measure the structure and bonding of the interfacial aqueous and hydrophobic phases. The surfaces of these LCNE samples possess a measurable free OH vibration, not found in previous studies and indicative of a clean interface. Tuning the nanoemulsion charge through addition of anionic surfactants, modeling potential surface-active contaminants, we observe the free OH to disappear and a reorientation of the interfacial hydrophobic molecules at micromolar surfactant concentrations. Notably, the free OH vibration provides evidence for stronger dispersion interactions between water molecules and the hydrophobic phase at the LCNE surface compared with similar planar water-alkane interfaces. We propose the stronger bonding interactions, in addition to an ordered interfacial aqueous layer, contribute to the delayed droplet coalescence and subsequent phase separation.

Hydration mediated interfacial transitions on mixed hydrophobic/hydrophilic nanodroplet interfaces

Interfacial phase transitions are of fundamental importance for climate, industry, and biological processes. In this work, we observe a hydration mediated surface transition in supercooled oil nanodroplets in aqueous solutions using second harmonic and sum frequency scattering techniques. Hexadecane nanodroplets dispersed in water freeze at a temperature of ∼15 °C below the melting point of the bulk alkane liquid. Addition of a trimethylammonium bromide (C_XTA⁺) type surfactant with chain length equal to or longer than that of the alkane causes the bulk oil droplet freezing transition to be preceded by a structural interfacial transition that involves water, oil, and the surfactant. Upon cooling, the water loses some of its orientational order with respect to the surface normal, presumably by reorienting more parallel to the oil interface. This is followed by the surface oil and surfactant alkyl chains losing some of their flexibility, and this chain stretching induces alkyl chain ordering in the bulk of the alkane phase, which is then followed by the bulk transition occurring at a 3 °C lower temperature. This behavior is reminiscent of surface freezing observed in planar tertiary alkane/surfactant/water systems but differs distinctively in that it appears to be induced by the interfacial water and requires only a very small amount of surfactant.

Interfacial structural crossover and hydration thermodynamics of charged C60 in water

Classical molecular dynamics simulations of the hydration thermodynamics, structure, and dynamics of water in hydration shells of charged buckminsterfullerenes are presented in this study. Charging of fullerenes leads to a structural transition in the hydration shell, accompanied by creation of a significant population of dangling O-H bonds pointing toward the solute. In contrast to the well accepted structure-function paradigm, this interfacial structural transition causes nearly no effect on either the dynamics of hydration water or on the solvation thermodynamics. Linear response to the solute charge is maintained despite significant structural changes in the hydration shell, and solvation thermodynamic potentials are nearly insensitive to the altering structure. Only solvation heat capacities, which are higher thermodynamic derivatives of the solvation free energy, indicate some sensitivity to the local hydration structure. We have separated the solvation thermodynamic potentials into direct solute-solvent interactions and restructuring of the hydration shell and analyzed the relative contributions of electrostatic and nonpolar interactions to the solvation thermodynamics.

Kinetically Stable Triglyceride-Based Nanodroplets and Their Interactions with Lipid-Specific Proteins

Understanding of the interactions between proteins and natural and artificially prepared lipid membrane surfaces and embedded nonpolar cores is important in studies of physiological processes and their pathologies and is applicable to nanotechnologies. In particular, rapidly growing interest in cellular droplets defines the need for simplified biomimetic lipid model systems to overcome in vivo complexity and variability. We present a protocol for the preparation of kinetically stable nanoemulsions with nanodroplets composed of sphingomyelin (SM) and cholesterol (Chol), as amphiphilic surfactants, and trioleoylglycerol (TOG), at various molar ratios. To prepare stable SM/Chol-coated monodisperse lipid nanodroplets, we modified a reverse phase evaporation method and combined it with ultrasonication. Lipid composition, ζ-potential, gyration and hydrodynamic radius, shape, and temporal stability of the lipid nanodroplets were characterized and compared to extruded SM/Chol large unilamellar vesicles. Lipid nanodroplets and large unilamellar vesicles with theoretical SM/Chol/TOG molar ratios of 1/1/4.7 and 4/1/11.7 were further investigated for the orientational order of their interfacial water molecules using a second harmonic scattering technique, and for interactions with the SM-binding and Chol-binding pore-forming toxins equinatoxin II and perfringolysin O, respectively. The surface characteristics (ζ-potential, orientational order of interfacial water molecules) and binding of these proteins to the nanodroplet SM/Chol monolayers were similar to those for the SM/Chol bilayers of the large unilamellar vesicles and SM/Chol Langmuir monolayers, in terms of their surface structures. We propose that such SM/Chol/TOG nanoparticles with the required lipid compositions can serve as experimental models for monolayer membrane to provide a system that imitates the natural lipid droplets.

Characterization of the interface of binary mixed DOPC:DOPS liposomes in water: The impact of charge condensation

Solutions of liposomes composed of binary mixtures of anionic dioleoylphosphatidylserine (DOPS) and zwitterionic dioleoylphosphatidylcholine (DOPC) are investigated with label-free angle-resolved (AR) second harmonic scattering (SHS) and electrophoretic mobility measurements. The membrane surface potential is extracted from the AR-SHS response. The surface potential changes from -10 to -145 mV with varying DOPS content ( from 0% to 100%) and levels off already at ∼ 10 % DOPS content. The ζ-potential shows the same trend but with a drastically lower saturation value (-44 mV). This difference is explained by the formation of a condensed layer of Na⁺ counterions around the outer leaflet of the liposome as predicted by charge condensation theories for polyelectrolyte systems.

Lyophobicity may not be the main driving force for long chain surfactants from the bulk phase to the interface

According to the Traube rule, a surfactant with a longer alkane chain is more hydrophobic so its tendency to be driven from a polar solvent to a less polar interface is higher. In this work, we revisited this topic by studying the adsorption of quaternary ammonium salts and carboxylic acids with various alkane chain lengths at the hexadecane-water interface. The adsorption free energies of the surfactants at this oil-water interface from the polar (aqueous solution) or nonpolar phase (hexadecane) were estimated from second harmonic generation measurements. The variation of the free energies per methylene group in the bulk phase, at the oil-water interface and at the air-water interface revealed that there are different interactions between the alkane chains of the surfactants in different environments. The chain-chain interaction at the hexadecane-water interface is lower than that at the air-water interface. The driving force for the alkane chains to adsorb at the oil-water interface from the oil phase is close to that from the aqueous phase. This observation reveals that the chain-chain interaction rather than the lyophobicity of the solute with respect to the solvent is the main contributor to the adsorption free energy. This is the first experimental comparison of the free energies of the alkane chains in oil, in water, at the air-water interface and at the oil-water interface. These results provide information for studying the interactions of hydrophobic species in different environments. This work also provides a method for estimating the solvation energy of some head groups in surfactants.

Water at surfaces with tunable surface chemistries

Aqueous interfaces are ubiquitous in natural environments, spanning atmospheric, geological, oceanographic, and biological systems, as well as in technical applications, such as fuel cells and membrane filtration. Where liquid water terminates at a surface, an interfacial region is formed, which exhibits distinct properties from the bulk aqueous phase. The unique properties of water are governed by the hydrogen-bonded network. The chemical and physical properties of the surface dictate the boundary conditions of the bulk hydrogen-bonded network and thus the interfacial properties of the water and any molecules in that region. Understanding the properties of interfacial water requires systematically characterizing the structure and dynamics of interfacial water as a function of the surface chemistry. In this review, we focus on the use of experimental surface-specific spectroscopic methods to understand the properties of interfacial water as a function of surface chemistry. Investigations of the air-water interface, as well as efforts in tuning the properties of the air-water interface by adding solutes or surfactants, are briefly discussed. Buried aqueous interfaces can be accessed with careful selection of spectroscopic technique and sample configuration, further expanding the range of chemical environments that can be probed, including solid inorganic materials, polymers, and water immiscible liquids. Solid substrates can be finely tuned by functionalization with self-assembled monolayers, polymers, or biomolecules. These variables provide a platform for systematically tuning the chemical nature of the interface and examining the resulting water structure. Finally, time-resolved methods to probe the dynamics of interfacial water are briefly summarized before discussing the current status and future directions in studying the structure and dynamics of interfacial water.

Zwitterionic and Charged Lipids Form Remarkably Different Structures on Nanoscale Oil Droplets in Aqueous Solution

The molecular structure of zwitterionic and charged monolayers on small oil droplets in aqueous solutions is determined using a combined second harmonic and sum frequency study. From the interfacial vibrational signature of the acyl chains and phosphate headgroups as well as the response of the hydrating water, we find that zwitterionic and charged lipids with identical acyl chains form remarkably different monolayers. Zwitterionic phospholipids form a closely packed monolayer with highly ordered acyl tails. In contrast, the charged phospholipids form a monolayer with a low number density and disordered acyl tails. The charged headgroups are oriented perpendicular to the monolayer rather than parallel, as is the case for zwitterionic lipids. These significant differences between the two types of phospholipids indicate important roles of phospholipid headgroups in the determination of properties of cellular membranes and lipid droplets. The observed behavior of charged phospholipids is different from expectations based on studies performed on extended planar interfaces, at which condensed monolayers are readily formed. The difference can be explained by nanoscale related changes in charge condensation behavior that has its origin in a different balance of interfacial intermolecular interactions.

The Molecular Mechanism of Nanodroplet Stability

Mixtures of nano- and microscopic oil droplets in water have recently been rediscovered as miniature reaction vessels in microfluidic environments and are important constituents of many environmental systems, food, personal care, and medical products. The oil nanodroplet/water interface stabilized by surfactants determines the physicochemical properties of the droplets. Surfactants are thought to stabilize nanodroplets by forming densely packed monolayers that shield the oil phase from the water. This idea has been inferred from droplet stability measurements in combination with molecular structural data obtained from extended planar interfaces. Here, we present a molecular level investigation of the surface structure and stability of nanodroplets and show that the surface structure of nanodroplets is significantly different from that of extended planar interfaces. Charged surfactants form monolayers that are more than 1 order of magnitude more dilute than geometrically packed ones, and there is no experimental correlation between stability and surfactant surface density. Moreover, dilute negatively charged surfactant monolayers produce more stable nanodroplets than dilute positively charged and dense geometrically packed neutral surfactant monolayers. Droplet stability is found to depend on the relative cooperativity between charge-charge, charge-dipole, and hydrogen-bonding interactions. The difference between extended planar interfaces and nanoscale interfaces stems from a difference in the thermally averaged total charge-charge interactions in the two systems. Low dielectric oil droplets with a size smaller than the Debye length in oil permit repulsive interactions between like charges from opposing interfaces in small droplets. This behavior is generic and extends up to the micrometer length scale.

Alkyl Chain Length Dependent Structural and Orientational Transformations of Water at Alcohol-Water Interfaces and Its Relevance to Atmospheric Aerosols

Although the hydrophobic size of an amphiphile plays a key role in various chemical, biological, and atmospheric processes, its effect at macroscopic aqueous interfaces (e.g., air-water, oil-water, cell membrane-water, etc.), which are ubiquitous in nature, is not well understood. Here we report the hydrophobic alkyl chain length dependent structural and orientational transformations of water at alcohol (C_nH_2n+1OH, n = 1-12)-water interfaces using interface-selective heterodyne-detected vibrational sum frequency generation (HD-VSFG) and Raman multivariate curve resolution (Raman-MCR) spectroscopic techniques. The HD-VSFG results reveal that short-chain alcohols (C_nH_2n+1OH, n < 4, i.e., up to 1-propanol) do not affect the structure (H-bonding) and orientation of water at the air-water interface; the OH stretch band maximum appears at ∼3470 cm^-1, and the water H atoms are pointed toward the bulk water, that is, "H-down" oriented. In contrast, long-chain alcohols (C_nH_2n+1OH, n > 4, i.e., beyond 1-butanol) make the interfacial water more strongly H-bonded and reversely orientated; the OH stretch band maximum appears at ∼3200 cm^-1, and the H atoms are pointed away from the bulk water, that is, "H-up" oriented. Interestingly, for the alcohol of intermediate chain length (C_nH_2n+1OH, n = 4, i.e, 1-butanol), the interface is quite unstable even after hours of its formation and the time-averaged result is qualitatively similar to that of the long-chain alcohols, indicating a structural/orientational crossover of interfacial water at the 1-butanol-water interface. pH-dependent HD-VSFG measurements (with H₂O as well as isotopically diluted water, HOD) suggest that the structural/orientational transformation of water at the long-chain alcohol-water interface is associated with the adsorption of OH^- anion at the interface. Vibrational mapping of the water structure in the hydration shell of OH^- anion (obtained by Raman-MCR spectroscopy of NaOH in HOD) clearly shows that the water becomes strongly H-bonded (OH stretch max. ≈ 3200 cm^-1) while hydrating the OH^- anion. Altogether, it is conceivable that alcohols of different hydrophobic chain lengths that are present in the troposphere will differently affect the interfacial electrostatics and associated chemical processes of aerosol droplets, which are critical for cloud formation, global radiation budget, and climate change.

The ionic strength dependent zeta potential at the surface of hexadecane droplets in water and the corresponding interfacial adsorption of surfactants

An anomalous maximum in the ionic strength dependent electrophoretic mobility curves has been observed in previous reports from particles dispersed in colloids. This maximum has been considered anomalous because it is contradictory with the Gouy-Chapman model. The existence of such a maximum has been attributed to specific ionic adsorption, a hairy layer at the surface, or the effect of the anomalous change of surface conductivity in different studies. It was also pointed out that the O'Brien-White approach based on the Gouy-Chapman model could be used to understand this maximum in electrophoretic mobility curves and lead to understandable zeta potential curves. This implied that the observed maximum was actually not "anomalous". In this work we report our simulation of ionic strength dependent zeta potential curves based on the O'Brien-White approach and experimental studies of the ionic strength dependent electrophoretic mobility of the hexadecane droplets in the hexadecane-water emulsions at different pH or in the presence of sodium dodecyl sulphate at varied concentrations. In some cases, the simulation shows that the calculation with the O'Brien-White approach does change the trend in the concerned ionic strength dependent curves. However, the simulation in some other cases also leads to similar trends in the ionic strength dependent electrophoretic mobility curves and zeta potential curves. In the experiments, both the existence and non-existence of such a maximum were observed and demonstrated to be system dependent. The corresponding molecular structure of the oil-water interface was then discussed with the analyses of the zeta potential curves and second harmonic generation signals recorded at the hexadecane-water interface.