Silaindacenodithiophene-Based Molecular Donor: Morphological Features and Use in the Fabrication of Compositionally Tolerant, High-Efficiency Bulk Heterojunction Solar Cells

Characterization of Excited-State Electronic Structure in Diblock π-Conjugated Oligomers with Adjustable Linker Electronic Coupling

Diblock conjugated oligomers are π-conjugated molecules that contain two segments having distinct frontier orbital energies and HOMO-LUMO gap offsets. These oligomers are of fundamental interest to understand how the distinct π-conjugated segments interact and modify their excited state properties. The current paper reports a study of two series of diblock oligomers that contain oligothiophene (Tn) and 4,7-bis(2-thienyl)-2,1,3-benzothiadiazole (TBT) segments that are coupled by either ethynyl (-C≡C-) or trans-(-C≡C-)2Pt(II)(PBu3)2 acetylide linkers. In these structures, the Tn segment is electron rich (donor), and the TBT is electron poor (acceptor). The diblock oligomers are characterized by steady-state and time-resolved spectroscopy, including UV-visible absorption, fluorescence, fluorescence lifetimes, and ultrafast transient absorption spectroscopy. Studies are compared in several solvents of different polarity and with different excitation wavelengths. The results reveal that the (-C≡C-) linked oligomers feature a delocalized excited state that takes on a charge transfer (CT) character in more polar media. In the (-C≡C-)2Pt(II)(PBu3)2-linked oligomers, there is weak coupling between the Tn and TBT segments. Consequently, short wavelength excitation selectively excites the Tn segment, which then undergoes ultrafast energy transfer (~1 ps) to afford a TBT-localized excited state.

Design of Isoindigo-Based Small-Molecule Donors for Bulk Heterojunction Organic Solar Cell Applications in Combination with Nonfullerene Acceptors

The development of small-molecule organic solar cells with the required efficiency depends on the information obtained from molecular-level studies. In this context, 39 small-molecule donors featuring isoindigo as an acceptor moiety have been meticulously crafted for potential applications in bulk heterojunction organic solar cells. These molecules follow the D2-A-D1-A-D2 and D2-A-π-D1-π-A-D2 framework. Similar molecules considered in the previous experimental study (molecules R1 ((3E,3″E)-6,6″-(benzo[1,2-b:4,5-b']dithiophene-2,6-diyl)bis(1,1'-dimethyl-[3,3'-biindolinylidene]-2,2'-dione)) and R2 ((3E,3″E)-6,6″-(4,8-dimethoxybenzo[1,2-b:4,5-b']dithiophene-2,6-diyl)bis(1,1'-dimethyl-[3,3'-biindolinylidene]-2,2'-dione))) have been chosen as reference molecules. Molecules with and without π-spacers have been considered to understand the impact of the length of the π-spacer on intramolecular charge-transfer transitions and absorption properties. A detailed investigation is carried out to establish the relationship between the structure and photovoltaic parameters using density functional theory and time-dependent density functional theory methods. The newly developed molecules exhibit better electronic, excited-state, and charge transport properties than the reference molecules. Additionally, model donor-acceptor interfaces are constructed by integrating the designed donor molecules with fullerene/nonfullerene acceptors. The electronic and excited-state properties of these interfaces are rigorously evaluated. Results elucidate that the donor comprising of isoindigo-bithiophene-pyrroloindacenodithiophene (IIG-T2-PIDT) emerges as a promising candidate for bulk heterojunction solar cells based on nonfullerene acceptors. This research provides systematic design strategies for the development of small-molecule donors for organic solar cells.

What We have Learnt from PM6:Y6

Over the past three years, remarkable advancements in organic solar cells (OSCs) have emerged, propelled by the introduction of Y6-an innovative A-DA'D-A type small molecule non-fullerene acceptor (NFA). This review provides a critical discussion of the current knowledge about the structural and physical properties of the PM6:Y6 material combination in relation to its photovoltaic performance. The design principles of PM6 and Y6 are discussed, covering charge transfer, transport, and recombination mechanisms. Then, the authors delve into blend morphology and degradation mechanisms before considering commercialization. The current state of the art is presented, while also discussing unresolved contentious issues, such as the blend energetics, the pathways of free charge generation, and the role of triplet states in recombination. As such, this review aims to provide a comprehensive understanding of the PM6:Y6 material combination and its potential for further development in the field of organic solar cells. By addressing both the successes and challenges associated with this system, this review contributes to the ongoing research efforts toward achieving more efficient and stable organic solar cells.

Mixed molecular orientations promote charge transport in bulk heterojunction solar cells

By systematically varying the molecular orientation of poly(3-hexylthiophene-2,5-diyl) (P3HT) in P3HT:fullerene bulk heterojunctions, we show that a mixed face-on and edge-on texture can be beneficial for out-of-plane charge flow in solution processed organic bulk heterojunction solar cells. These results implicate the need to balance in-plane and out-of-plane pathways for efficient charge percolation in bulk heterojunctions.

Unraveling the Unconventional Order of a High-Mobility Indacenodithiophene-Benzothiadiazole Copolymer

A new class of donor-acceptor (D-A) copolymers found to produce high charge carrier mobilities competitive with amorphous silicon (>1 cm² V^-1 s^-1) exhibit the puzzling microstructure of substantial local order, however lacking long-range order and crystallinity previously deemed necessary for achieving high mobility. Here, we demonstrate the application of low-dose transmission electron microscopy to image and quantify the nanoscale and mesoscale organization of an archetypal D-A copolymer across areas comparable to electronic devices (≈9 μm²). The local structure is spatially resolved by mapping the backbone (001) spacing reflection, revealing nanocrystallites of aligned polymer chains throughout nearly the entire film. Analysis of the nanoscale structure of its ordered domains suggests significant short- and medium-range order and preferential grain boundary orientations. Moreover, we provide insights into the rich, interconnected mesoscale organization of this new family of D-A copolymers by analysis of the local orientational spatial autocorrelations.

Silicon and oxygen synergistic effects for the discovery of new high-performance nonfullerene acceptors

In organic electronics, an aromatic fused ring is a basic unit that provides π-electrons to construct semiconductors and governs the device performance. The main challenge in developing new π-skeletons for tuning the material properties is the limitation of the available chemical approach. Herein, we successfully synthesize two pentacyclic siloxy-bridged π-conjugated isomers to investigate the synergistic effects of Si and O atoms on the geometric and electronic influence of π-units in organic electronics. Notably, the synthesis routes for both isomers possess several advantages over the previous approaches for delivering conventional aromatic fused-rings, such as environmentally benign tin-free synthesis and few synthetic steps. To explore their potential application as photovoltaic materials, two isomeric acceptor-donor-acceptor type acceptors based on these two isomers were developed, showing a decent device efficiency of 10%, which indicates the great potential of this SiO-bridged ladder-type unit for the development of new high-performance semiconductor materials.

Off/On Amino-Functionalized Polyhedral Oligomeric Silsesquioxane-Perylene Diimides Based Hydrophilic Luminescent Polymer for Aqueous Fluoride Ion Detection

Fluoride ion detection in water focuses much attention due to the serious healthy impact in human pathologies. For fluoride recognition, the chemical affinity between fluoride and silicon has been developed on the basis of the degradation mechanism. However, most fluorescent probes are the "turn off" type due to the aggregation of the degradational products. Herein, we first developed an "off-on" hydrophilic luminescent polymer composed of amino-functionalized polyhedral oligomeric silsesquioxane (AE-POSS) and perylene diimides (PDIs) for fluoride ion in water. The AE-PDI polymer was "turned off" because of the photoinduced electron transfer (PET) between PDI and AE-POSS, and then after reaction with F^-, the fluorescent emission could "turn on" obviously because the PET was blocked by the degradation of the cage. The PET from amino-POSS to PDI was proved by FL spectrum and energies of HOMO and LUMO orbitals. ²⁹Si, ¹⁹F NMR, and ¹H NMR titration, XRD, FTIR, size analysis, and ion chromatography were applied to demonstrate the degradation mechanism. These results indicated that the higher quantum yield could be obtained by introducing the amide group in the PDI and the products of AE-PDI polymer might exist in the form of complex compounds with partial condensation of organosiloxane. With high selectivity and sensitivity (detection limit of 16.2 ppb), this probe was successfully applied for F^- detection in actual water samples.

Understanding the High Performance of over 15% Efficiency in Single-Junction Bulk Heterojunction Organic Solar Cells

The highly efficient single-junction bulk-heterojunction (BHJ) PM6:Y6 system can achieve high open-circuit voltages (V_OC ) while maintaining exceptional fill-factor (FF) and short-circuit current (J_SC ) values. With a low energetic offset, the blend system is found to exhibit radiative and non-radiative recombination losses that are among the lower reported values in the literature. Recombination and extraction dynamic studies reveal that the device shows moderate non-geminate recombination coupled with exceptional extraction throughout the relevant operating conditions. Several surface and bulk characterization techniques are employed to understand the phase separation, long-range ordering, as well as donor:acceptor (D:A) inter- and intramolecular interactions at an atomic-level resolution. This is achieved using photo-conductive atomic force microscopy, grazing-incidence wide-angle X-ray scattering, and solid-state ¹⁹ F magic-angle-spinning NMR spectroscopy. The synergy of multifaceted characterization and device physics is used to uncover key insights, for the first time, on the structure-property relationships of this high-performing BHJ blend. Detailed information about atomically resolved D:A interactions and packing reveals that the high performance of over 15% efficiency in this blend can be correlated to a beneficial morphology that allows high J_SC and FF to be retained despite the low energetic offset.

Solvent Additives: Key Morphology-Directing Agents for Solution-Processed Organic Solar Cells

Organic photovoltaics (OPV) have the advantage of possible fabrication by energy-efficient and cost-effective deposition methods, such as solution processing. Solvent additives can provide fine control of the active layer morphology of OPVs by influencing film formation during solution processing. As such, solvent additives form a versatile method of experimental control for improving organic solar cell device performance. This review provides a brief history of solution-processed bulk heterojunction OPVs and the advent of solvent additives, putting them into context with other methods available for morphology control. It presents the current understanding of how solvent additives impact various mechanisms of phase separation, enabled by recent advances in in situ morphology characterization. Indeed, understanding solvent additives' effects on film formation has allowed them to be applied and combined effectively and synergistically to boost OPV performance. Their success as a morphology control strategy has also prompted the use of solvent additives in related organic semiconductor technologies. Finally, the role of solvent additives in the development of next-generation OPV active layers is discussed. Despite concerns over their environmental toxicity and role in device instability, solvent additives remain relevant morphological directing agents as research interests evolve toward nonfullerene acceptors, ternary blends, and environmentally sustainable solvents.

π-π stacking induced high current density and improved efficiency in ternary organic solar cells

Ternary blend systems have been used to enhance the short-circuit current density (JSC) and fill factor (FF) of organic solar cells (OSCs). However, it is still a challenge to find suitable third components that concurrently possess complementary light absorption and well-matched energy levels. Here, a small organic molecule, 4,4'-(9,9-dihexyl-9H-fluorene-2,7-diyl)bis(N,N-bis(4-(pyren-1-yl)phenyl)anili-ne) (DFNPy), which contains a triphenylamine core and bulky pyrene rings, was designed and used to construct ternary blend OSCs. DFNPy shows complementary absorption spectra in the 350-450 nm shortwave band, which has seldom been reported in the field of ternary OSCs. Furthermore, the bulky pyrene rings aggregate via π-π stacking to promote charge transfer. As a result, a high power conversion efficiency (PCE) of 10.59% with an enhanced JSC of 19.72 mA cm-2 was realized in PTB7-Th:DFNPy:PC71BM-based ternary OSCs. The addition of DFNPy was found to modulate the film morphology by improving the film phase separation and crystallinity, which can facilitate charge generation and decrease charge recombination, resulting in enhanced mobility. The results demonstrate an effective strategy for improving the photovoltaic performance of OSCs.

Lead Halide Perovskites as Charge Generation Layers for Electron Mobility Measurement in Organic Semiconductors

Hybrid lead halide perovskites are introduced as charge generation layers (CGLs) for the accurate determination of electron mobilities in thin organic semiconductors. Such hybrid perovskites have become a widely studied photovoltaic material in their own right, for their high efficiencies, ease of processing from solution, strong absorption, and efficient photogeneration of charge. Time-of-flight (ToF) measurements on bilayer samples consisting of the perovskite CGL and an organic semiconductor layer of different thickness are shown to be determined by the carrier motion through the organic material, consistent with the much higher charge carrier mobility in the perovskite. Together with the efficient photon-to-electron conversion in the perovskite, this high mobility imbalance enables electron-only mobility measurement on relatively thin application-relevant organic films, which would not be possible with traditional ToF measurements. This architecture enables electron-selective mobility measurements in single components as well as bulk-heterojunction films as demonstrated in the prototypical polymer/fullerene blends. To further demonstrate the potential of this approach, electron mobilities were measured as a function of electric field and temperature in an only 127 nm thick layer of a prototypical electron-transporting perylene diimide-based polymer, and found to be consistent with an exponential trap distribution of ca. 60 meV. Our study furthermore highlights the importance of high mobility charge transporting layers when designing perovskite solar cells.

Enhancing Organic Semiconductor-Surface Plasmon Polariton Coupling with Molecular Orientation

Due to strong electric field enhancements, surface plasmon polaritons (SPPs) are capable of drastically increasing light-molecule coupling in organic optoelectronic devices. The electric field enhancement, however, is anisotropic, offering maximal functional benefits if molecules are oriented perpendicular to the interface. To provide a clear demonstration of this orientation dependence, we study SPP dispersion and SPP-mediated photoluminescence at a model Au/small-molecule interface where identical molecules can be deposited with two very different molecular backbone orientations depending on processing conditions. First, we demonstrate that thin films of p-SIDT(FBTTh₂)₂ can be deposited with either all "in-plane" (parallel to substrate) or a 50/50 mix of in-plane/"out-of-plane" (perpendicular to substrate) optical transition dipoles by the absence or presence, respectively, of diiodooctane during spin-coating. In contrast to typical orientation control observed in organic thin films, for this particular molecule, this corresponds to films with conjugated backbones purely in-plane, or with a 50/50 mix of in-plane/out-of-plane backbones. Then, using momentum-resolved reflectometry and momentum-resolved photoluminescence, we study and quantify changes in SPP dispersion and photoluminescence intensity arising solely from changes in molecular orientation. We demonstrate increased SPP momentum and a 2-fold enhancement in photoluminescence for systems with out-of-plane oriented transition dipoles. These results agree well with theory and have direct implications for the design and analysis of organic optoelectronic devices.

Impact of interfacial molecular orientation on radiative recombination and charge generation efficiency

A long standing question in organic electronics concerns the effects of molecular orientation at donor/acceptor heterojunctions. Given a well-controlled donor/acceptor bilayer system, we uncover the genuine effects of molecular orientation on charge generation and recombination. These effects are studied through the point of view of photovoltaics—however, the results have important implications on the operation of all optoelectronic devices with donor/acceptor interfaces, such as light emitting diodes and photodetectors. Our findings can be summarized by two points. First, devices with donor molecules face-on to the acceptor interface have a higher charge transfer state energy and less non-radiative recombination, resulting in larger open-circuit voltages and higher radiative efficiencies. Second, devices with donor molecules edge-on to the acceptor interface are more efficient at charge generation, attributed to smaller electronic coupling between the charge transfer states and the ground state, and lower activation energy for charge generation.

Molecular orientation profoundly affects the performance of donor-acceptor heterojunctions, whilst it has remained challenging to investigate the detail. Using a controllable interface, Ran et al. show that the edge-on geometries improve charge generation at the cost of non-radiative recombination loss.

Applying Thienyl Side Chains and Different π-Bridge to Aromatic Side-Chain Substituted Indacenodithiophene-Based Small Molecule Donors for High-Performance Organic Solar Cells

A pair of linear tetrafluorinated small molecular donors, named as ThIDTTh4F and ThIDTSe4F, which are with tetrathienyl-substituted IDT as electron-rich central core, electron-deficient difluorobenzothiadiazole as acceptor units, and donor end-capping groups, but having differences in the π-bridge (thiophene and selenophene), were successfully synthesized and evaluated as donor materials in organic solar cells. Such π-bridge and core units in these small molecules play a decisive role in the formation of the nanoscale separation of the blend films, which were systematically investigated through absorption spectra, grazing incidence X-ray diffraction pattern, transmission electron microscopy images, resonant soft X-ray scattering profiles, and charge mobility measurement. The ThIDTSe4F (with selenophene π-bridge)-based device exhibited superior performance than devices based on ThIDTh4F (with thiophene π-bridge) after post annealing treatment owing to optimized film morphology and improved charge transport. Power conversion efficiency of 7.31% and fill factor of ∼0.70 were obtained by using a blend of ThIDTSe4F and PC₇₁BM with thermal annealing and solvent vapor annealing treatments, which is the highest PCE from aromatic side-chain substituted IDT-based small molecular solar cells. The scope of this study is to reveal the structure-property relationship of the aromatic side-chain substituted IDT-based donor materials as a function of π-bridge and the post annealing conditions.

In-Situ GISAXS Study of Supramolecular Nanofibers having Ultrafast Humidity Sensitivity

Self assembled nanofibers derived from donor-acceptor (D-A) pair of dodecyl methyl viologen (DMV) and potassium salt of coronene tetracarboxylate (CS) is an excellent material for the development of organic electronic devices particularly for ultrafast response to relative humidity (RH). Here we have presented the results of in-situ grazing incidence small angle x-ray scattering (GISAXS) measurements to understand aridity dependent self reorganization of the nanofibers. The instantaneous changes in the organization of the nanofibers was monitored with different equilibrium RH conditions. Additionally formation of nanofibers during drying was studied by GISAXS technique - the results show two distinct stages of structural arrangements, first the formation of a lamellar mesophase and then, the evolution of a distorted hexagonal lattice. The RH dependent GISAXS results revealed a high degree of swelling in the lattice of the micelles and reduction in the distortion of the hexagonal structure with increase in RH. In high RH condition, the nanofibers show elliptical distortion but could not break into lamellar phase as observed during formation through drying. This observed structural deformation gives insight into nanoscopic structural changes of the micelles with change in RH around it and in turn explains ultrafast sensitivity in its conductivity for RH variation.

Synthesis of regioregular π-conjugated polymers consisting of a lactam moiety via direct heteroarylation polymerization

Regioregular polymers based on an asymmetric dithieno[3,2-b:2',3'-d]pyridin-5(4H)-one (TN) unit that consists of a lactam moiety were synthesized via palladium-catalyzed direct heteroarylation polymerization. The random orientation of the lactam moiety can be prevented by carefully designing the monomers with tailored molecular structures. It is noted that connecting the TN unit in different fashions generates substructures in the polymer backbone with different electronic structures. Compared to the random counterparts, the regioregular homopolymers exhibit dramatically discrepant optical properties and electronic structures, while the variations in the copolymers are less distinguished.

Bornane[2,3-b]pyrazino-fused [30]trithiadodecaazahexaphyrin. Synthesis, acid-base behavior and nickel(II) coordination ability

Polydentate ligand-bornane[2,3-b]pyrazino-fused [30]trithiadodecaazahexaphyrin has been synthesized by crossover condensation of the racemic mixture of (R/S)-bornane[2[Formula: see text],3[Formula: see text]-b]-2,3-dicyanopyrazine and 2,5-diamino-1,3,4-thiadiazole. Its coordination ability, acid-base behavior and stability were studied by chemical kinetics/thermodynamics, UV-vis spectrophotometry and quantum chemical DFT/B3LYP/6-31G(d,p) methods. The fourth-order kinetic equation with the kinetic constant of 3.38 × 108 s[Formula: see text].mol3.L[Formula: see text] and the association mechanism according to the Langford−Gray classification were established for the fused [30]trithiadodecaazahexaphyrin–nickel diacetate–DMF system. The stepwise protonation of macrocyclic ligand with p[Formula: see text] of -1.41 in CH2Cl2-CF3COOH mixtures at the Hammett acidity functions ([Formula: see text] changed from -2.0 to 2.0 and quantitative parameters of ligand stability in AcOH–H2SO4 mixtures was obtained. The chemical structure of protonated forms and ligand destruction mechanism have been proposed. The obtained results are of interest for development of technological regulations of complex formation and for the transition to the hetero nuclear complexes.

11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor

Simutaneously high open circuit voltage and high short circuit current density is a big challenge for achieving high efficiency polymer solar cells due to the excitonic nature of organic semdonductors. Herein, we developed a trialkylsilyl substituted 2D-conjugated polymer with the highest occupied molecular orbital level down-shifted by Si–C bond interaction. The polymer solar cells obtained by pairing this polymer with a non-fullerene acceptor demonstrated a high power conversion efficiency of 11.41% with both high open circuit voltage of 0.94 V and high short circuit current density of 17.32 mA cm⁻² benefitted from the complementary absorption of the donor and acceptor, and the high hole transfer efficiency from acceptor to donor although the highest occupied molecular orbital level difference between the donor and acceptor is only 0.11 eV. The results indicate that the alkylsilyl substitution is an effective way in designing high performance conjugated polymer photovoltaic materials.

In organic photovoltaics, non-fullerene acceptors relax matching rules and allow for the development of new donor polymers. Here, Bin et al. design a donor polymer and obtain high photoconversion efficiencies despite the low energy offset for hole transfer between the acceptor and the donor.

Effects of solvent additive on "s-shaped" curves in solution-processed small molecule solar cells

A novel molecular chromophore, p-SIDT(FBTThCA8)₂, is introduced as an electron-donor material for bulk heterojunction (BHJ) solar cells with broad absorption and near ideal energy levels for the use in combination with common acceptor materials. It is found that films cast from chlorobenzene yield devices with strongly s-shaped current-voltage curves, drastically limiting performance. We find that addition of the common solvent additive diiodooctane, in addition to facilitating crystallization, leads to improved vertical phase separation. This yields much better performing devices, with improved curve shape, demonstrating the importance of morphology control in BHJ devices and improving the understanding of the role of solvent additives.

Organic Optoelectronic Materials: Mechanisms and Applications

Organic (opto)electronic materials have received considerable attention due to their applications in thin-film-transistors, light-emitting diodes, solar cells, sensors, photorefractive devices, and many others. The technological promises include low cost of these materials and the possibility of their room-temperature deposition from solution on large-area and/or flexible substrates. The article reviews the current understanding of the physical mechanisms that determine the (opto)electronic properties of high-performance organic materials. The focus of the review is on photoinduced processes and on electronic properties important for optoelectronic applications relying on charge carrier photogeneration. Additionally, it highlights the capabilities of various experimental techniques for characterization of these materials, summarizes top-of-the-line device performance, and outlines recent trends in the further development of the field. The properties of materials based both on small molecules and on conjugated polymers are considered, and their applications in organic solar cells, photodetectors, and photorefractive devices are discussed.

Synthesis and characterization of fluorinated azadipyrromethene complexes as acceptors for organic photovoltaics

Homoleptic zinc(II) complexes of di(phenylacetylene)azadipyrromethene (e.g., Zn(WS3)2) are potential non-fullerene electron acceptors for organic photovoltaics. To tune their properties, fluorination of Zn(WS3)2 at various positions was investigated. Three fluorinated azadipyrromethene-based ligands were synthesized with fluorine at the para-position of the proximal and distal phenyl groups, and at the pyrrolic phenylacetylene moieties. Additionally, a CF3 moiety was added to the pyrrolic phenyl positions to study the effects of a stronger electron withdrawing unit at that position. The four ligands were chelated with zinc(II) and BF2+ and the optical and electrochemical properties were studied. Fluorination had little effect on the optical properties of both the zinc(II) and BF2+ complexes, with λmax in solution around 755 nm and 785 nm, and high molar absorptivities of 100 × 103 M-1cm-1 and 50 × 103 M-1cm-1, respectively. Fluorination of Zn(WS3)2 raised the oxidation potentials by 0.04 V to 0.10 V, and the reduction potentials by 0.01 V to 0.10 V, depending on the position and type of substitution. The largest change was observed for fluorine substitution at the proximal phenyl groups and CF3 substitution at the pyrrolic phenylacetylene moieties. The later complexes are expected to be stronger electron acceptors than Zn(WS3)2, and may enable charge transfer from other conjugated polymer donors that have lower energy levels than poly(3-hexylthiophene) (P3HT).

Easy Access to NO2 -Containing Donor-Acceptor-Acceptor Electron Donors for High Efficiency Small-Molecule Organic Solar Cells

Two donor-acceptor-acceptor (D-A-A)-type molecules incorporating nitrobenzoxadiazole (NBO) as the A-A block and ditolylamine as the D block bridged through a phenylene (PNBO) and a thiophene (TNBO) spacer were synthesized in a one-step coupling reaction. Their electronic, photophysical, and thermal properties; crystallographic analysis; and theoretical calculations were studied to establish a clear structure-property relationship. The results indicate that the quinoidal character of the thiophene bridge strongly governs the structural features and crystal packings (herringbone vs. brickwork) and thus the physical properties of the compounds. PNBO and TNBO were utilized as electron donors combined with C70 as the electron acceptor in the active layer of vacuum-processed bulk heterojunction small-molecule organic solar cells (SMOSCs). The power conversion efficiency of both PNBO- and TNBO-based OSCs exceeded 5 %. The ease of accessibility of PNBO and TNBO demonstrates the potential for simple and economical synthesis of electron donors in vacuum-processed SMOSCs.

Side-chain Engineering of Benzo[1,2-b:4,5-b']dithiophene Core-structured Small Molecules for High-Performance Organic Solar Cells

Three novel small molecules have been developed by side-chain engineering on benzo[1,2-b:4,5-b’]dithiophene (BDT) core. The typical acceptor-donor-acceptor (A-D-A) structure is adopted with 4,8-functionalized BDT moieties as core, dioctylterthiophene as π bridge and 3-ethylrhodanine as electron-withdrawing end group. Side-chain engineering on BDT core exhibits small but measurable effect on the optoelectronic properties of small molecules. Theoretical simulation and X-ray diffraction study reveal the subtle tuning of interchain distance between conjugated backbones has large effect on the charge transport and thus the photovoltaic performance of these molecules. Bulk-heterojunction solar cells fabricated with a configuration of ITO/PEDOT:PSS/SM:PC₇₁BM/PFN/Al exhibit a highest power conversion efficiency (PCE) of 6.99% after solvent vapor annealing.

Toward Additive-Free Small-Molecule Organic Solar Cells: Roles of the Donor Crystallization Pathway and Dynamics

The ease with which small-molecule donors crystallize during solution processing is directly linked to the need for solvent additives. Donor molecules that get trapped in disordered (H1) or liquid crystalline (T1) mesophases require additive processing to promote crystallization, phase separation, and efficient light harvesting. A donor material (X2) that crystallizes directly from solution yields additive-free solar cells with an efficiency of 7.6%.

Solution-Processable Organic Molecule for High-Performance Organic Solar Cells with Low Acceptor Content

A new planar D2-A-D1-A-D2 structured organic molecule with bithienyl benzodithiophene (BDT) as central donor unit D1 and fluorine-substituted benzothiadiazole (BTF) as acceptor unit and alkyl-dithiophene as end group and donor unit D2, BDT-BTF, was designed and synthesized for the application as donor material in organic solar cells (OSCs). BDT-BTF shows a broad absorption in visible region, suitable highest occupied molecular orbital energy level of -5.20 eV, and high hole mobility of 1.07 × 10(-2) cm(2)/(V s), benefitted from its high coplanarity and strong crystallinity. The OSCs based on BDT-BTF as donor (D) and PC71BM as acceptor (A) at a D/A weight ratio of 3:1 without any extra treatment exhibit high photovoltaic performance with Voc of 0.85 V, Jsc of 10.48 mA/cm(2), FF of 0.66, and PCE of 5.88%. The morphological study by transmission electron microscopy reveals that the blend of BDT-BTF and PC71BM (3:1, w/w) possesses an appropriate interpenetrating D/A network for the exciton separation and charge carrier transport, which agrees well with the good device performance. The optimized D/A weight ratio of 3:1 is the lowest acceptor content in the active layer reported so far for the high-performance OSCs, and the organic molecules with the molecular structure like BDT-BTF could be promising high-performance donor materials in solution-processable OSCs.

Asymmetrical Squaraines Bearing Fluorine-Substituted Indoline Moieties for High-Performance Solution-Processed Small-Molecule Organic Solar Cells

Two novel asymmetrical squaraines based on the indoline unit, ASQ-5-F and ASQ-5-DF, with one and two fluorine substituents, have been developed to investigate the effect of fluorine substituted on small-molecule bulk-heterojunction (BHJ) organic solar cells (OSCs). In comparison with non-fluorine-substituted ASQ-5, both fluorine-substituted ASQ-5-F and ASQ-5-DF possess analogous absorption band gaps but 0.05 and 0.10 eV lowered highest occupied molecular orbital (HOMO) energy levels, respectively. Single-crystal analysis exhibits that ASQ-5-DF shows more desirable intermolecular packing patterns for the hole-carrier collection than ASQ-5 does; hence, higher hole mobility could be acquired. Therefore, solution-processed small-molecule BHJ OSCs fabricated with ASQ-5-F/PC71BM and ASQ-5-DF/PC71BM blends exhibit extremely higher power conversion efficiency (PCE; 5.0% and 6.0%, respectively) than that of ASQ-5/PC71BM (4.5%). The much improved PCE could be attributed to the simultaneously enhanced Voc, Jsc, and FF relative to those of the ASQ-5-based device. To our knowledge, this is the highest PCE (6.0%) among squaraine-based solution-processed BHJ OSCs and the highest PCE in OSCs based on the fluorinated donor segment of small molecules.

Donor-acceptor small molecules for organic photovoltaics: single-atom substitution (Se or S)

Two isostructural low-band-gap small molecules that contain a one-atom substitution, S for Se, were designed and synthesized. The molecule 7,7'-[4,8-bis(2-ethylhexyloxy)benzo[1,2-b:4,5-b']dithiophene]bis[6-fluoro-4-(5'-hexyl-2,2'-bithiophen-5-yl)benzo[c][1,2,5]thiadiazole] (1) and its selenium analogue 7,7'-[4,8-bis(2-ethylhexyloxy)benzo[1,2-b:4,5-b']dithiophene]bis[6-fluoro-4-(5'-hexyl-2,2'-bithiophen-5-yl)benzo[c][1,2,5]selenodiazole] (2) are both based on the electron-rich central unit benzo[1,2-b:4,5-b']dithiophene. The aim of this work was to investigate the effect of one-atom substitution on the optoelectronic properties and photovoltaic performance of devices. Theoretical calculations revealed that this one-atom variation has a small but measurable effect on the energy of frontier molecular orbital (HOMO and LUMO), which, in turn, can affect the absorption profile of the molecules, both neat and when mixed in a bulk heterojunction (BHJ) with PC71BM. The Se-containing variant 2 led to higher efficiencies [highest power conversion efficiency (PCE) of 2.6%] in a standard organic photovoltaic architecture, when combined with PC71BM after a brief thermal annealing, than the S-containing molecule 1 (highest PCE of 1.0%). Studies of the resulting morphologies of BHJs based on 1 and 2 showed that one-atom substitution could engender important differences in the solubilities, which then influenced the crystal orientations of the small molecules within this thin layer. Brief thermal annealing resulted in rotation of the crystalline grains of both molecules to more energetically favorable configurations.

Heavily n-Dopable π-Conjugated Redox Polymers with Ultrafast Energy Storage Capability

We report here the first successful demonstration of a "π-conjugated redox polymer" simultaneously featuring a π-conjugated backbone and integrated redox sites, which can be stably and reversibly n-doped to a high doping level of 2.0 with significantly enhanced electronic conductivity. The properties of such a heavily n-dopable polymer, poly{[N,N'-bis(2-octyldodecyl)-1,4,5,8-naphthalenedicarboximide-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} (P(NDI2OD-T2)), were compared vis-à-vis to those of the corresponding backbone-insulated poly{[N,N'-bis(2-octyldodecyl)-1,4,5,8-naphthalenedicarboximide-2,6-diyl]-alt-5,5'-[2,2'-(1,2-ethanediyl)bithiophene]} (P(NDI2OD-TET)). When evaluated as a charge storage material for rechargeable Li batteries, P(NDI2OD-T2) delivers 95% of its theoretical capacity at a high rate of 100C (72 s per charge-discharge cycle) under practical measurement conditions as well as 96% capacity retention after 3000 cycles of deep discharge-charge. Electrochemical, impedance, and charge-transport measurements unambiguously demonstrate that the ultrafast electrode kinetics of P(NDI2OD-T2) are attributed to the high electronic conductivity of the polymer in the heavily n-doped state.

2,1,3-Benzothiadiazole-5,6-dicarboxylic imide--a versatile building block for additive- and annealing-free processing of organic solar cells with efficiencies exceeding 8%

A new photoactive polymer comprising benzo[1,2-b:3,4-b':5,6-d']trithiophene and 2,1,3-benzothiadiazole-5,6-dicarboxylic imide is reported. The synthetic design allows for alkyl chains to be introduced on both electron-rich and electron-deficient components, which in turn allows for rapid optimization of the alkyl chain substitution pattern. Consequently, the optimized polymer shows a maximum efficiency of 8.3% in organic photovoltaic devices processed in a commercially viable fashion without solvent additives, annealing, or device engineering.

Spectra and Charge Transport of Polar Molecular Photoactive Layers Used for Solar Cells

The ground state structures, HOMO and LUMO energy levels, band gapsΔH-L, ionization potentials (IP), and electron affinities (EA) of three types of copolymer P1 and its derivatives P2, P3, and PBDT-BTA were investigated by using density functional theory (DFT) with B3LYP and 6-31G (d) basis set. On the base of optimized structures of ground states, their absorption spectra were obtained by using TD-DFT//Cam-B3LYP/6-31 G (d). Research shows that with the increasing conjugated units, HOMO energy levels increased, LUMO energy levels decreased, and band gaps decreased gradually. Moreover, their ionization potentials decreased and electron affinities increased along with the increase of conjugated chains, and absorption spectra red-shifted. In addition, the side chain has a significant effect on the properties of ground and excited states. In order to investigate the influence of conjugated units and side chain on the charge transport, their hole and electron reorganization energies were calculated, and the results indicated that Pb have a good hole transport capability. Considering the practical application, the HOMO and LUMO energy levels, band gaps, and absorption spectra under external electric field were studied, and the results proved that the external electric field has an effect on the optical and electronic properties.

Highly efficient photovoltaics and field-effect transistors based on copolymers of mono-fluorinated benzothiadiazole and quaterthiophene: synthesis and effect of the molecular weight on device performance

A D–A conjugated polymer based on mono-fluorinated benzothiadiazole (FBT) was designed and synthesized, and high performance photovoltaics and FETs were achieved.

Solution-processed new porphyrin-based small molecules as electron donors for highly efficient organic photovoltaics

A series of new A–D–A structural 5,15-dialkylated porphyrin-cored small molecules have been developed as donors in bulk heterojunction organic solar cells, and the highest power conversion efficiency of 6.49% has been achieved.

Thiophene synthesis via 1,1-carboboration

Reaction of bis(tert-butylethynyl)sulfide with the boron Lewis acid reagents X–B(C₆F₅)₂ (X = CH₃, Cl, C₆F₅) in pentane at r.t. gave the respective borylated thiophenes in a sequence of 1,1-carboboration reactions.

S,N-Heteropentacene based small molecules with A–D–A structure for solution processed organic bulk heterojunction solar cells

SN(BTTh₂)₂ and SN(BTAOTh₂)₂, containing an electron rich planar S,N-heteropentacene flanked with alkoxy substituted and unsubstituted benzothiadiazole and end capped with hexyl-substituted bi-thiophene units, were designed and synthesized.

Investigating the crystalline nature, charge transport properties and photovoltaic performances of ladder-type donor based small molecules

The indacenodithieno[3,2-b]thiophene (IDTT) core promoted the crystallinity of ladder-type donor based small molecules and π-bridge structures could improve the photovoltaic performance.