Phase-Pure FeSex (x = 1, 2) Nanoparticles with One- and Two-Photon Luminescence

FeSe2 and Its Composites for Pollutants Removal: Synthesis, Mechanisms, and Application Potential

In recent years, the research of FeSe2 and its composites in environmental remediation has been gradually carried out. And the FeSe2 materials show great catalytic performance in photocatalysis, electrocatalysis, and Fenton-like reactions for pollutants removal. Therefore, the studies and applications of FeSe2 materials are reviewed in this work, including the common synthesis methods, the role of Fe and Se species as well as the catalyst structure, and the potential for practical environmental applications. Hereinto, it is worth noting in particular that the lower-valent Se (Se2-), unsaturated Se (Se-), and Se vacancies (VSe) can play different roles in promoting pollutants removal. In addition, the FeSe2 material also demonstrates high stability, reusability, and adaptability over a wider pH range as well as universality to different pollutants. In view of the overall great properties and performance of FeSe2 materials compared with other typical Fe-based materials, it deserves and needs further research. And finally, this paper presents some challenges and perspectives in future development, looking forward to providing helpful guidance for the subsequent research of FeSe2 and its composites for environmental application.

Emerging potentials of Fe-based nanomaterials for chiral sensing and imaging

Fe-based nanostructures have possessed promising properties that make it suitable for chiral sensing and imaging applications owing to their ultra-small size, non-toxicity, biocompatibility, excellent photostability, tunable fluorescence, and water solubility. This review summarizes the recent research progress in the field of Fe-based nanostructures and places special emphases on their applications in chiral sensing and imaging. The synthetic strategies to prepare the targeted Fe-based structures were also introduced. The chiral sensing and imaging applications of the nanostructures are discussed in details.

All Transition Metal Selenide Composed High-Energy Solid-State Hybrid Supercapacitor

Transition metal selenides (TMSs) have enthused snowballing research and industrial attention due to their exclusive conductivity and redox activity features, holding them as great candidates for emerging electrochemical devices. However, the real-life utility of TMSs remains challenging owing to their convoluted synthesis process. Herein, a versatile in situ approach to design nanostructured TMSs for high-energy solid-state hybrid supercapacitors (HSCs) is demonstrated. Initially, the rose-nanopetal-like NiSe@Cu₂ Se (NiCuSe) positive electrode and FeSe nanoparticles negative electrode are directly anchored on Cu foam via in situ conversion reactions. The complementary potential windows of NiCuSe and FeSe electrodes in aqueous electrolytes associated with the excellent electrical conductivity results in superior electrochemical features. The solid-state HSCs cell manages to work in a high voltage range of 0-1.6 V, delivers a high specific energy density of 87.6 Wh kg^-1 at a specific power density of 914.3 W kg^-1 and excellent cycle lifetime (91.3% over 10 000 cycles). The innovative insights and electrode design for high conductivity holds great pledge in inspiring material synthesis strategies. This work offers a feasible route to develop high-energy battery-type electrodes for next-generation hybrid energy storage systems.

Recent Advances in Metal-Based Magnetic Composites as High-Efficiency Candidates for Ultrasound-Assisted Effects in Cancer Therapy

Metal-based magnetic materials have been used in different fields due to their particular physical or chemical properties. The original magnetic properties can be influenced by the composition of constituent metals. As utilized in different application fields, such as imaging monitoring, thermal treatment, and combined integration in cancer therapies, fabricated metal-based magnetic materials can be doped with target metal elements in research. Furthermore, there is one possible new trend in human activities and basic cancer treatment. As has appeared in characterizations such as magnetic resonance, catalytic performance, thermal efficiency, etc., structural information about the real morphology, size distribution, and composition play important roles in its further applications. In cancer studies, metal-based magnetic materials are considered one appropriate material because of their ability to penetrate biological tissues, interact with cellular components, and induce noxious effects. The disruptions of cytoskeletons, membranes, and the generation of reactive oxygen species (ROS) further influence the efficiency of metal-based magnetic materials in related applications. While combining with cancer cells, these magnetic materials are not only applied in imaging monitoring focus areas but also could give the exact area information in the cure process while integrating ultrasound treatment. Here, we provide an overview of metal-based magnetic materials of various types and then their real applications in the magnetic resonance imaging (MRI) field and cancer cell treatments. We will demonstrate advancements in using ultrasound fields co-worked with MRI or ROS approaches. Besides iron oxides, there is a super-family of heterogeneous magnetic materials used as magnetic agents, imaging materials, catalytic candidates in cell signaling and tissue imaging, and the expression of cancer cells and their high sensitivity to chemical, thermal, and mechanical stimuli. On the other hand, the interactions between magnetic candidates and cancer tissues may be used in drug delivery systems. The materials’ surface structure characteristics are introduced as drug loading substrates as much as possible. We emphasize that further research is required to fully characterize the mechanisms of underlying ultrasounds induced together, and their appropriate relevance for materials toxicology and biomedical applications.

Dual-Modal FexCuySe and Upconversion Nanoparticle Assemblies for Intracellular MicroRNA-21 Detection

In situ quantification and imaging of low-level intracellular microRNAs (miRs) are important areas in biosensor research. Herein, DNA-driven Fe_xCu_ySe@upconversion nanoparticle (UCNP) core@satellite nanostructures were developed to probe microRNA-21 (miR-21). Fe_xCu_ySe@UCNP probes displayed dual signals: upconversion luminescence (UCL) and magnetic resonance imaging (MRI). In the presence of miR-21, the luminescence signal was restored and the T₂ value was significantly increased because of dissociation of UCNPs from the assemblies. There was a good linear relationship between the dual signals and the expression levels of miR-21 in the range of 0.035-31.824 amol/ng_RNA. The limit of detection (LOD) was 0.0058 amol/ng_RNA for the luminescence intensity and 0.0182 amol/ng_RNA for the MRI signal. This method opens a new avenue for intracellular miR-21 detection with high sensitivity and specificity.

FeSe2 nanosheets as a bifunctional platform for synergistic tumor therapy reinforced by NIR-II light

Multi-functionality has been a constant pursuit in the development of next-generation drug carriers, as it will bring the potential for combination therapy by integrating diverse therapeutic modes. In this work, FeSe₂ nanosheets (NSs) have been prepared as a bifunctional platform to investigate their use in synergistic cancer therapy. Bifunctional FeSe₂ NSs exhibit exceptional Fenton-like activity that generates cytotoxic hydroxyl radical (˙OH) and strong broad photothermal performance including the second-infrared (NIR-II) spectral range, wherein the ˙OH production can be enhanced by NIR-II light irradiation. Furthermore, doxorubicin (DOX) was conjugated onto NSs via a pH-responsive hydrazone bond to achieve preferential drug release in an acidic microenvironment. Upon intratumoral administration, these bifunctional drug-carrying FeSe₂ NSs showed an NIR-II irradiation-reinforced strong tumor suppression effect, and no obvious toxicity to normal tissues was observed. This study provides a new paradigm for the design of advanced drug carriers relying on their inherent physicochemical properties.

Influence of selenium precursors on the formation of iron selenide nanostructures (FeSe2): Efficient Electro-Fenton catalysts for detoxification of harmful organic dyestuffs

In this investigation, a sequences of iron diselenide (FeSe₂) nanomaterials as the competent and highly stable catalysts for the detoxification of aqueous organic dye pollutants such as Congo red (CR) and methylene blue (MB) through Electro-Fenton (EF) process using hydrogen peroxide as an initiator have been studied. The utilized selenium precursors include selenium metal, selenious acid (H₂SeO₃) and selenium dioxide (SeO₂) which were employed for the synthesis of FeSe₂ catalysts through a wet chemical strategy. It has been observed that based on the employed precursors, different morphologies ranges of the FeSe₂ catalysts were obtained: microgranualr particles to nano-stick to nanoflakes. The crystalline nature and phase purity of the obtained FeSe₂ catalysts were determined through XRD, Raman and HR-TEM analyses which confirmed their orthorhombic ferroselite structure. Among the prepared FeSe₂ catalysts, FS-2 (using H₂SeO₃) displayed better porous properties as compared to other catalysts and achieved the highest surface area of 74.68 m²g^-1. The narrow bandgap (0.88 eV) and fast conversion of Fe²⁺/Fe³⁺ cycle of FeSe₂ led CR and MB degradation of 93.3% and 90.4%, respectively. The outcome of this study demonstrates improved catalytic properties of FeSe₂ nanostructures for the efficient detoxification of hazardous and toxic effluents.

On the Mechanistic Understanding of Photovoltage Loss in Iron Pyrite Solar Cells

Considering the natural abundance, the optoelectronic properties, and the electricity production cost, iron pyrite (FeS₂ ) has a strong appeal as a solar cell material. The maximum conversion efficiency of FeS₂ solar cells demonstrated to date, however, is below 3%, which is significantly below the theoretical efficiency limit of 25%. This poor conversion efficiency is mainly the result of the poor photovoltage, which has never exceeded 0.2 V with a device having appreciable photocurrent. Several studies have explored the origin of the low photovoltage in FeS₂ solar cells, and have improved understanding of the photovoltage loss mechanisms. Fermi level pinning, surface inversion, ionization of bulk donor states, and photocarrier loss have been suggested as the underlying reasons for the photovoltage loss in FeS₂ . Given the past and more recent scientific data, together with contradictory results to some extent, it is timely to discuss these mechanisms to give an updated view of the present status and remaining challenges. Herein, the current understanding of the origin of low photovoltage in FeS₂ solar cells is critically reviewed, preceded by a succinct discussion on the electronic structure and optoelectronic properties. Finally, suggestions of a few research directions are also presented.

Ferromagnetic FeSe2 from a mixed sulphur-selenium complex of iron [Fe{(SePPh2NPPh2S)2N}3] through pyrolysis

Iron (III) thioselenoimidodiphosphinate complex, Fe{(SePPh₂NPPh₂S)₂N}₃], was synthesized from the ligand [Ph₂P(S)HNP(Se)Ph₂], and the complex employed as the combined source of the targeted elements (Fe and Se) to generate orthorhombic FeSe₂. This was achieved by thermolysis using a quartz glass tube, under reduced pressure at 500 °C during 1 h 30 min. The crystalline product was revealed by X-ray diffraction (XRD), while the morphology consisted of polygonal crystallites according to the scanning electron microscopy (SEM) studies. Superconducting quantum interference device (SQUID) measurements on the material confirmed its ferromagnetism as observed from the magnetization curve, indicated by the field-cooled and zero field-cooled conditions under a magnetic field of 100 Oe. This ferromagnetic material, FeSe₂ finds useful application in producing electrical semiconductors.

Study of the Phase-Evolution Mechanism of an Fe-Se System at the Nanoscale: Optimization of Synthesis Conditions for the Isolation of Pure Phases and Their Controlled Growth

The iron selenide (Fe-Se) family of nanoparticles (Fe_xSe_y-where x/y ranges from 1:2 to 1:1) has been fabricated by a thermal decomposition method. The control over solution chemistry has been developed by intensively investigating the effect of reaction parameters by means of wide-angle X-ray scattering, leading to the rich insights into the phase-evolution mechanism of the Fe-Se system. The phase transformation followed the FeSe₂ → Fe₃Se₄ → Fe₇Se₈ → FeSe sequence in the temperature range of 110-300 °C. The deep mechanistic insight helped in the identification of optimized conditions needed to crystallize the individual phase of the Fe-Se system as well as control of the morphology, crystalline phase purity, and thermal stability of the obtained Fe-Se nanoparticles.

FeSe quantum dots for in vivo multiphoton biomedical imaging

An immense demand in biomedical imaging is to develop efficient photoluminescent probes with high biocompatibility and quantum yield, as well as multiphoton absorption performance to improve penetration depth and spatial resolution. Here, iron selenide (FeSe) quantum dots (QDs) are reported to meet these criteria. The synthesized QDs exhibit two- and three-photon excitation property at 800- and 1080-nm wavelengths and high quantum yield (ca. 40%), which are suitable for second-window imaging. To verify their biosuitability, poly(ethylene glycol)-conjugated QDs were linked with human epidermal growth factor receptor 2 (HER2) antibodies for in vitro/in vivo two-photon imaging in HER2-overexpressed MCF7 cells and a xenograft breast tumor model in mice. Imaging was successfully carried out at a depth of up to 500 μm from the skin using a nonlinear femtosecond laser at an excitation wavelength of 800 nm. These findings may open up a way to apply biocompatible FeSe QDs to multiphoton cancer imaging.

Development and application of a novel fluorescent nanosensor based on FeSe quantum dots embedded silica molecularly imprinted polymer for the rapid optosensing of cyfluthrin

A novel molecularly imprinted silica layer appended to FeSe quantum dots (MIP-FeSe-QDs) was fabricated and utilized as a recognition element to develop a selective and sensitive fluorescent nanosensor for cyfluthrin (CYF) determination. The MIP-FeSe-QDs were characterized by fluorescence spectrometry, scanning electron microscopy, transmission electron microscopy, and Fourier transform infrared spectroscopy. Excellent selectivity and high sensitivity of MIP-FeSe-QDs to CYF molecules were observed based on the fluorescence quenching of FeSe-QDs. Under optimal conditions, a good linear relationship was found between fluorescence quenching effect and increased CYF concentration within 0.010-0.20mg/L, with a correlation coefficient of 0.9911. The practicality of the developed sensor method for CYF detection in fish and sediment samples was further validated. Good recoveries ranging from 88.0% to 113.9% with<6.8% relative standard deviations were obtained. The detection limits of CYF in sediment and fish samples were 1.3 and 1.0µg/kg, respectively. This study established a novel, rapid fluorescent nanosensor detection method based on MIP-QDs for successfully analyzing CYF in fish and sediment samples.

Two-dimensional transition metal dichalcogenide-based counter electrodes for dye-sensitized solar cells

Dye-sensitized solar cell using counter electrode based on transition metal dichalcogenides.

Superconductivity in alkali metal intercalated iron selenides

Alkali metal intercalated iron selenide superconductors A x Fe2-y Se2 (where A  =  K, Rb, Cs, Tl/K, and Tl/Rb) are characterized by several unique properties, which were not revealed in other superconducting materials. The compounds crystallize in overall simple layered structure with FeSe layers intercalated with alkali metal. The structure turned out to be pretty complex as the existing Fe-vacancies order below ~550 K, which further leads to an antiferromagnetic ordering with Néel temperature fairly above room temperature. At even lower temperatures a phase separation is observed. While one of these phases stays magnetic down to the lowest temperatures the second is becoming superconducting below ~30 K. All these effects give rise to complex relationships between the structure, magnetism and superconductivity. In particular the iron vacancy ordering, linked with a long-range magnetic order and a mesoscopic phase separation, is assumed to be an intrinsic property of the system. Since the discovery of superconductivity in those compounds in 2010 they were investigated very extensively. Results of the studies conducted using a variety of experimental techniques and performed during the last five years were published in hundreds of reports. The present paper reviews scientific work concerning methods of synthesis and crystal growth, structural and superconducting properties as well as pressure investigations.

Universal synthesis of air stable, phase pure, controllable FeSe₂ nanocrystals

Iron diselenium (FeSe2) is a promising semiconductor for thin-film solar cells because it has a suitable band gap (E(g) = 1.0 eV) and high absorption coefficient. Despite these prospects, the controllable synthesis of FeSe2 nanostructures and the diversity of their geometries has hardly been studied previously. Here, we described a successful synthesis of phase-pure, high-quality, and stable orthorhombic FeSe2 nanocrystals (NCs) in aqueous solvents. A variety of morphologies of the FeSe2 NCs were achieved by adjusting synthetic methods. FeSe2 nanoparticles with diameters of 30-100 nm were synthesized in the presence of ethylenediamine (en). Moreover, the synthetic approach developed for nanoparticles proved to be quite universal and could be modified to produce nanowires and octahedrons, with which structure the material could display high crystallinity. The diameter of the FeSe2 nanowires was 300-500 nm with a length exceeding 2 μm. The octahedrons displayed lateral dimensions of 1 μm. Meanwhile, the probable growth mechanism and fabrication process of the NCs were proposed. Polycrystalline FeSe2 thin films were fabricated by modifying the sedimentation method. The obvious photoconductivity of FeSe2 has already been observed, and it was considered to be one candidate of solar cell for the very first time.

Facile preparation of uniform FeSe2 nanoparticles for PA/MR dual-modal imaging and photothermal cancer therapy

Recently, magnetic photothermal nanomaterials have emerged as a new class of bio-nanomaterials for application in cancer diagnosis and therapy. Hence, we developed a new kind of magnetic nanomaterials, iron diselenide (FeSe(2)) nanoparticles, for multimodal imaging-guided photothermal therapy (PTT) to improve the efficacy of cancer treatment. By controlling the reaction time and temperature, FeSe(2) nanoparticles were synthesized by a simple solution-phase method. After modification with polyethylene glycol (PEG), the obtained FeSe(2)-PEG nanoparticles showed high stability under various physiological conditions. FeSe(2)-PEG could serve as a T2-weighted magnetic resonance (MR) imaging contrast agent because of its strong superparamagnetic properties, with its r(2) relaxivity determined to be 133.38 mM(-1) S(-1), a value higher than that of the clinically used Feridex. On the other hand, with high absorbance in the near-infrared (NIR) region, FeSe(2)-PEG also appeared to be a useful contrast agent for photoacoustic imaging (PA) as well as an effective photothermal agent for PTT cancer treatment, as demonstrated in our animal tumor model experiments. Moreover, long-term toxicity tests have proven that FeSe(2)-PEG nanoparticles after systematic administration rendered no appreciable toxicity to the treated animals, and could be gradually excreted from the major organs of mice. Our work indicates that FeSe(2)-PEG nanoparticles would be a new class of theranostic agents promising for application in bioimaging and cancer therapy.