Introduction of π-complexation into porous aromatic framework for highly selective adsorption of ethylene over ethane

High-Pressure Molecular Sieving of High-Humidity C2H4/C2H6 Mixture by a Hydrophobic Flexible Metal-Organic Framework

Molecular sieving is an ideal separation mechanism, but controlling pore size, restricting framework flexibility, and avoiding strong adsorption are all very challenging. Here, we report a flexible adsorbent showing molecular sieving at ambient temperature and high pressure, even under high humidity. While typical guest-induced transformations are observed, a high transition pressure of 16.6 atm is observed for C2H4 at 298 K because of very weak C2H4 adsorption (~16 kJ mol-1). Also, C2H6 is completely excluded below the pore-opening pressure of 7.7 atm, giving single-component selectivity of ca. 300. Quantitative high-pressure column breakthrough experiments using 1 : 1 C2H4/C2H6 mixtures at 10 atm as input confirm molecular sieving with C2H4 adsorption of 0.73 mmol g-1 or 32 cm3(STP) cm-3 and negligible C2H6 adsorption of 0.001(2) mmol g-1, and the adsorbent can be completely regenerated by inert gas purging. Furthermore, it is highly hydrophobic with negligible water adsorption, and the C2H4/C2H6 separation performance is unaffected at high humidity.

Towards an E-nose: Metal-organic frameworks based quartz crystal microbalance array for fruit ripeness indexing

Ethylene is a hormone for fruit ripening control, and for the purpose of maintaining plant quality, ethylene monitoring is crucial. Due to the simple structure and limited functionality, the technical realization of ethylene detection by an artificial sensor remains a challenge. In this paper, we present a metal-organic frameworks (MOFs) array based electronic nose (e-nose) for rapid and accurate determination of ethylene. Six zirconium-based MOFs with systematically modified pore sizes and π-π binding sites have been prepared and fabricated into a sensor array using quartz crystal microbalance (QCM) technology. By virtue of the synergistic features of six MOF sensors, selectivity detection of ethylene has been achieved. The detection limit reaches to 0.27 ± 0.02 ppm, and high selectivity and stability (98.29 % ± 0.88 %) could also be confirmed. By submitting data to machine learning algorithm, an e-nose system could be established for discriminating ethylene from mixtures with a qualitative accuracy of 90.30 % and quantitative accuracy of 98.89 %. Practical evaluation suggests that the e-nose could index the fruit quality based on the accurate detection of ethylene released during fruit ripeness. This work demonstrates the promising potential of fabricating MOFs based e-nose systems for practical monitoring applications by selectively detecting challengeable target molecules.

Accelerating In Silico Discovery of Metal-Organic Frameworks for Ethane/Ethylene and Propane/Propylene Separation: A Synergistic Approach Integrating Molecular Simulation, Machine Learning, and Active Learning

Cryogenic distillation, a currently employed method for C2H4/C2H6 and C3H6/C3H8 mixture separation, is energy-intensive, prompting the research toward alternative technologies, including adsorbent-based separation. In this work, we combine machine learning (ML) technique with high-throughput screening to screen ∼23,000 hypothetical metal-organic frameworks (MOFs) for paraffin (C2H6 and C3H8) selective adsorbent separation. First, structure-based prescreening was employed to remove MOFs with undesired geometric properties. Further, a random forest model built upon the multicomponent grand canonical Monte Carlo (m-GCMC) simulation data of training set MOFs was found to be the most successful in learning the relationship between MOF features and olefin/paraffin mixture separation. Using this technique, the separation performance of the remaining (test set) MOFs was predicted, and the top-performing MOFs were identified. We also employed active learning (AL) to evaluate its effectiveness in improving the prediction of olefin/paraffin selectivity. AL was discovered to be ∼29 times more efficient than the best-supervised ML model, as it was able to identify the top materials in limited training data and at a fraction of computational cost and time as compared to ML techniques. Among the top selected materials, framework chemistry was found to be the most important parameter. Nickel and copper (as a metal node) in a tfzd and hms topological arrangement respectively, were discovered to be a prevalent attribute in high-performing MOFs, further demonstrating the prominent significance of framework chemistry. Additionally, the top MOFs discovered were studied in detail and further compared to the previously reported MOFs. These MOFs show the highest selectivity for C2H4/C2H6 and C3H6/C3H8 mixture separation, as reported until date. The hierarchical strategy devised in this study will facilitate the quick screening of MOFs across multiple databases toward industrially significant separation processes by leveraging molecular simulations and AL.

Efficient Catalytic Oxidation of Ethylene at 0 °C on an in Situ Carbon Modified Pt Catalyst Supported on SBA-15

The design of efficient catalysts for catalytic ethylene (C2H4) oxidation is of crucial importance for extending the shelf life of fruits and vegetables. Herein, a carbon modified SBA-15 supported Pt catalyst (Pt/CSBA-15) was prepared in situ by a facile solid phase grinding-infiltration-inert atmosphere calcination method. Characterization results reveal that in the Pt/CSBA-15 catalysts thin carbon layers are successfully formed in the hexagonal pores of SBA-15. Additionally, Pt particles are well dispersed in the channels of SBA-15, and Pt/CSBA-15 has a smaller Pt particle size than the catalyst without carbon modification (i.e., Pt/SBA-15). O2 is more feasibly adsorbed and activated on small-sized Pt particles, and in situ formed carbon species enhance the hydrophobicity of catalysts. As a result, both 3Pt/CSBA-15 and 5Pt/CSBA-15 are able to maintain 100% conversion of 50 ppm of C2H4 for more than 7 h at 0 °C. 3Pt/CSBA-15 even achieves 81.5% C2H4 conversion and 71.6% CO2 yield after 20 h, exhibiting much more prominent catalytic performances than 3Pt/SBA-15. DFT calculations and in situ FTIR measurements confirm that small-sized Pt particles possess strong O2 affinity to promote O2 adsorption, and in situ formed hydrophobic carbon layers efficiently suppress competitive H2O adsorption. Such a unique one-step catalyst preparation method for regulating the size of metal particles and the hydrophobicity of catalysts can be perfectly utilized to develop simple and efficient hydrophobic catalysts applied in low-temperature oxidation of C2H4.

Interaction-selective molecular sieving adsorbent for direct separation of ethylene from senary C2-C4 olefin/paraffin mixture

Olefin/paraffin separations are among the most energy-intensive processes in the petrochemical industry, with ethylene being the most widely consumed chemical feedstock. Adsorptive separation utilizing molecular sieving adsorbents can optimize energy efficiency, whereas the size-exclusive mechanism alone cannot achieve multiple olefin/paraffin sieving in a single adsorbent. Herein, an unprecedented sieving adsorbent, BFFOUR-Cu-dpds (BFFOUR = BF4-, dpds = 4,4'-bipyridinedisulfide), is reported for simultaneous sieving of C2-C4 olefins from their corresponding paraffins. The interlayer spaces can be selectively opened through stronger guest-host interactions induced by unsaturated C = C bonds in olefins, as opposed to saturated paraffins. In equimolar six-component breakthrough experiments (C2H4/C2H6/C3H6/C3H8/n-C4H8/n-C4H10), BFFOUR-Cu-dpds can simultaneously divide olefins from paraffins in the first column, while high-purity ethylene ( > 99.99%) can be directly obtained through the subsequent column using granular porous carbons. Moreover, gas-loaded single-crystal analysis, in-situ infrared spectroscopy measurements, and computational simulations demonstrate the accommodation patterns, interaction bonds, and energy pathways for olefin/paraffin separations.

Effective triclosan removal by using porous aromatic frameworks in continuous fixed-bed column studies

Triclosan (TCS) has been regarded as an emerging contaminant in aquatic systems, making its efficient removal of great significance. In this study, NPVMo@iPAF-1, with a specific surface area of 665 m2/g, was prepared by incorporating (NH4)5H6PV8Mo4O40 into porous aromatic frameworks (PAF). The maximum adsorption capacity of TCS on NPVMo@iPAF-1 reached 917.1 mg/g, as calculated from the Langmuir model. Fixed-bed columns packed with NPVMo@iPAF-1 were employed for TCS removal; the experiment data strongly correlated with the Thomas and Yoon-Nelson models under different operational conditions. Pore preservation, electrostatic effects, and the synergistic effect of π-π interactions contributed to the effective adsorption of TCS onto NPVMo@iPAF-1. The NPVMo@iPAF-1 fixed-bed column could be effectively regenerated through in-situ ozonation for more than 10 regeneration cycles. NPVMo@iPAF-1 turned out to be a promising adsorbent for removing TCS not only from pure water but also from reclaimed water and surface water samples.

Construction of Negative Electrostatic Pore Environments in a Scalable, Stable and Low-Cost Metal-organic Framework for One-Step Ethylene Purification from Ternary Mixtures

One-step separation of C2 H4 from ternary C2 mixtures by physisorbents remains a challenge to combine excellent separation performance with high stability, low cost, and easy scalability for industrial applications. Herein, we report a strategy of constructing negative electrostatic pore environments in a stable, low-cost, and easily scaled-up aluminum MOF (MOF-303) for efficient one-step C2 H2 /C2 H6 /C2 H4 separation. This material exhibits not only record high C2 H2 and C2 H6 uptakes, but also top-tier C2 H2 /C2 H4 and C2 H6 /C2 H4 selectivities at ambient conditions. Theoretical calculations combined with in situ infrared spectroscopy indicate that multiple N/O sites on pore channels can build a negative electro-environment to provide stronger interactions with C2 H2 and C2 H6 over C2 H4 . Breakthrough experiments confirm its exceptional separation performance for ternary mixtures, affording one of the highest C2 H4 productivity of 1.35 mmol g-1 . This material is highly stable and can be easily synthesized at kilogram-scale from cheap raw materials using a water-based green synthesis. The benchmark combination of excellent separation properties with high stability and low cost in scalable MOF-303 has unlocked its great potential in this challenging industrial separation.

Incorporation of multiple supramolecular binding sites into a robust MOF for benchmark one-step ethylene purification

One-step adsorption separation of C2H4 from ternary C2 hydrocarbon mixtures remains an important and challenging goal for petrochemical industry. Current physisorbents either suffer from unsatisfied separation performance, poor stability, or are difficult to scale up. Herein, we report a strategy of constructing multiple supramolecular binding sites in a robust and scalable MOF (Al-PyDC) for highly efficient one-step C2H4 purification from ternary mixtures. Owing to suitable pore confinement with multiple supramolecular binding sites, Al-PyDC exhibits one of the highest C2H2 and C2H6 uptakes and selectivities over C2H4 at ambient conditions. The gas binding sites have been visualized by single-crystal X-ray diffraction studies, unveiling that the low-polarity pore surfaces with abundant electronegative N/O sites provide stronger multiple supramolecular interactions with C2H2 and C2H6 over C2H4. Breakthrough experiments showed that polymer-grade C2H4 can be separated from ternary mixtures with a maximum productivity of 1.61 mmol g-1. This material can be prepared from two simple reagents using a green synthesis method with water as the sole solvent, and its synthesis can be easily scaled to multikilogram batches. Al-PyDC achieves an effective combination of benchmark separation performance, high stability/recyclability, green synthesis and easy scalability to address major challenges for industrial one-step C2H4 purification.

Porous organic materials for iodine adsorption

The nuclear industry will continue to develop rapidly and produce energy in the foreseeable future; however, it presents unique challenges regarding the disposal of released waste radionuclides because of their volatility and long half-life. The release of radioactive isotopes of iodine from uranium fission reactions is a challenge. Although various adsorbents have been explored for the uptake of iodine, there is still interest in novel adsorbents. The novel adsorbents should be synthesized using reliable and economically feasible synthetic procedures. Herein, we discussed the state-of-the-art performance of various categories of porous organic materials including covalent organic frameworks, covalent triazine frameworks, porous aromatic frameworks, porous organic cages, among other porous organic polymers for the uptake of iodine. This review discussed the synthesis of porous organic materials and their iodine adsorption capacity and reusability. Finally, the challenges and prospects for iodine capture using porous organic materials are highlighted.

Atomic Layers of B2 CuPd on Cu Nanocubes as Catalysts for Selective Hydrogenation

The search for highly active and selective catalysts with high precious metal atom utilization efficiency has attracted increasing interest in both the fundamental synthesis of materials and important industrial reactions. Here, we report the synthesis of Pd-Cu nanocubes with a Cu core and an ordered B2 intermetallic CuPd shell with controllable atomic layers on the surface (denoted as Cu/B2 CuPd), which can efficiently and robustly catalyze the selective hydrogenation of acetylene (C2H2) to ethylene (C2H4) under mild conditions. The optimized Cu/B2 CuPd with a Pd loading of 9.5 at. % exhibited outstanding performance in the C2H2 semi-hydrogenation with 100% C2H2 conversion and 95.2% C2H4 selectivity at 90 °C. We attributed this outstanding performance to the core/shell structure with a high surface density of active Pd sites isolated by Cu in the B2 intermetallic matrix, representing a structural motif of single-atom alloys (SAAs) on the surface. The combined experimental and computational studies further revealed that the electronic states of Pd and Cu are modulated by SAAs from the synergistic effect between Pd and Cu, leading to enhanced performance compared with pristine Pd and Cu catalysts. This study provides a new synthetic methodology for making single-atom catalysts with high precious metal atom utilization efficiency, enabling simultaneous tuning of both geometric and electronic structures of Pd active sites for enhanced catalysis.

Deep removal of trace C2H2 and CO2 from C2H4 by using customized potassium-exchange mordenite

Adsorptive separation using porous materials is a promising approach for separating alkynes/olefins due to its energy efficiency, while the deep removal of trace amounts of C₂H₂ and CO₂ from C₂H₄ is still very challenging for a commercial adsorbent. Herein, we report a low-cost inorganic metal cation-mediated mordenite (MOR) zeolite with the specific location and distribution of K⁺ cations acting as a goalkeeper for accurately controlling diffusion channels, as evidence of the experimental and simulation results. Deep purification of C₂H₄ from ternary CO₂/C₂H₂/C₂H₄ mixtures was first realized on K-MOR with exceptional results, achieving a remarkable polymer-grade C₂H₄ productivity of 1742 L kg^-1 for the CO₂/C₂H₂/C₂H₄ mixture. Our approach which only involves adjusting the equilibrium ions, is both promising and cost-effective, and opens up new possibilities for the use of zeolites in the industrial light hydrocarbon adsorption and purification process.

Design of Pore Properties of an Al-Based Metal-Organic Framework for the Separation of an Ethane/Ethylene Gas Mixture via Ethane-Selective Adsorption

A series of Al-based isomorphs (CAU-10H, MIL-160, KMF-1, and CAU-10pydc) were synthesized using isophthalic acid (ipa), 2,5-furandicarboxylic acid (fdc), 2,5-pyrrole dicarboxylic acid (pyrdc), and 3,5-pyridinedicarboxylic acid (pydc), respectively. These isomorphs were systematically investigated to identify the best adsorbent for effectively separating C₂H₆/C₂H₄. All CAU-10 isomorphs exhibited preferential adsorption of C₂H₆ over that of C₂H₄ in mixture. CAU-10pydc exhibited the best C₂H₆/C₂H₄ selectivity (1.68) and the highest C₂H₆ uptake (3.97 mmol g^-1) at 298 K and 1 bar. In the breakthrough experiment using CAU-10pydc, 1/1 (v/v) and 1/15 (v/v) C₂H₆/C₂H₄ gas mixtures were successfully separated into high-purity C₂H₄ (>99.95%), with remarkable productivities of 14.0 L_STP kg^-1 and 32.0 L_STP kg^-1, respectively, at 298 K. Molecular simulations revealed that the exceptional separation performance of CAU-10pydc originated from the increased porosity and reduced electron density of the pyridine ring of pydc, leading to a relatively larger decrease in π-π interactions with C₂H₄ than in the C-H···π interactions with C₂H₆. This study demonstrates that the pore size and geometry of the CAU-10 platform are modulated by the inclusion of heteroatom-containing benzene dicarboxylate or heterocyclic rings of dicarboxylate-based organic linkers, thereby fine-tuning the C₂H₆/C₂H₄ separation ability. CAU-10pydc was determined to be an optimum adsorbent for this challenging separation.

Influence of ZIF-9 and ZIF-12 structure on the formation of a series of new Co/N-doped porous carbon composites as anode electrodes for high-performance lithium-ion batteries

A series of new Co/N-doped porous carbon composites, denoted as Co/CZIF-9 and Co/CZIF-12, containing Co nanoparticles encapsulated in nitrogen-doped carbon matrices were prepared by annealing Co-based zeolite imidazolate framework materials, ZIF-9 and ZIF-12, as the efficient precursors at different temperatures. The structural features of the as-synthesized composites at 900 °C were determined by analytical methods with high reliability. Consequently, Co/CZIF-12_900 exhibits a high first specific discharge capacity of 971.0 mA h g^-1 at a current density of 0.1 A g^-1. Notably, the specific discharge/charge capacity of Co/CZIF-12_900 reaches about 508.8 mA h g^-1 at 0.1 A g^-1 after 100 cycles. The outstanding behaviors can be accounted for by the efficient incorporation of hetero-nitrogen doping and the Co nanoparticles within the layered structure of porous carbon, enhancing electrical conductivity and structural stability and limiting volume change during the intercalation/deintercalation of Li⁺ ions. These findings suggest that the Co/CZIF-12_900 material could be employed as a promising anode electrode for energy storage products.

Two Dual-Function Zr/Hf-MOFs as High-Performance Proton Conductors and Amines Impedance Sensors

In the field of sensing, finding high-performance amine molecular sensors has always been a challenging topic. Here, two highly stable 3D MOFs DUT-67(Hf) and DUT-67(Zr) with large specific surface areas and hierarchical pore structures were conveniently synthesized by solvothermal reaction of ZrCl₄/HfCl₄ with a simple organic ligand, 2,5-thiophene dicarboxylic acid (H₂TDC) according to literature approach. By analyzing TGA data, it was found that the two MOFs have defects (unsaturated metal sites) that can interact with substrates (H₂O and volatile amine gas), which is conducive to proton transfer and amine compound identification. Further experiments showed that at 100 °C and 98% relative humidity (RH), the optimized proton conductivities of DUT-67(Zr) and DUT-67(Hf) can reach the high values of 2.98 × 10^-3 and 3.86 × 10^-3 S cm^-1, respectively. Moreover, the room temperature sensing characteristics of MOFs' to amine gases were evaluated at 68, 85 and 98% RHs, respectively. Impressively, the prepared MOFs-based sensors have the desired stability and higher sensitivity to amines. Under 68% RH, the detection limits of DUT-67(Zr) or DUT-67(Hf) for volatile amine gases were 0.5 (methylamine), 0.5 (dimethylamine) and 1 ppm (trimethylamine), and 0.5 (methylamine), 0.5 (dimethylamine) and 0.5 ppm (trimethylamine), respectively. As far as we know, this is the best performance of ammonia room temperature sensors in the past proton-conductive MOF sensors.

Synthesis and Characterization of Benzene- and Triazine-Based Azo-Bridged Porous Organic Polymers

Porous organic polymers incorporating nitrogen-rich functionalities have recently emerged as promising materials for efficient and highly selective CO₂ capture and separation. Herein, we report synthesis and characterization of new two-dimensional (2D) benzene- and triazine-based azo-bridged porous organic polymers. Different synthetic approaches towards the porous azo-bridged polymers were tested, including reductive homocoupling of aromatic nitro monomers, oxidative homocoupling of aromatic amino monomers and heterocoupling of aromatic nitro monomers and a series of aromatic diamines of different lengths and rigidity. IR spectroscopy, ¹³C CP/MAS NMR spectroscopy, powder X-ray diffraction, elemental analysis, thermogravimetric analysis, nitrogen adsorption-desorption experiments and computational study were used to characterize structures and properties of the resulting polymers. The synthesized azo-bridged polymers are all amorphous solids of good thermal stability, exhibiting various surface areas (up to 351 m² g^-1). The obtained results indicated that the synthetic methods and building units have a pronounced effect on the porosity of the final materials. Reductive and oxidative homocoupling of aromatic nitro and amino building units, respectively, lead to 2D azo-bridged polymers of substantially higher porosity when compared to those produced by heterocoupling reactions. Periodic DFT calculations and Grand-canonical Monte Carlo (GCMC) simulations suggested that, within the used approximations, linear linkers of different lengths do not significantly affect CO₂ adsorption properties of model azo-bridged polymers.

Molecular Iodine Capture by Covalent Organic Frameworks

The effective capture and storage of volatile molecular iodine from nuclear waste is of great significance. Covalent organic frameworks (COFs) are a class of extended crystalline porous polymers that possess unique architectures with high surface areas, long-range order, and permanent porosity. Substantial efforts have been devoted to the design and synthesis of COF materials for the capture of radioactive iodine. In this review, we first introduce research techniques for determining the mechanism of iodine capture by COF materials. Then, the influencing factors of iodine capture performance are classified, and the design principles and strategies for constructing COFs with potential for iodine capture are summarized on this basis. Finally, our personal insights on remaining challenges and future trends are outlined, in order to bring more inspiration to this hot topic of research.

Synthesis of Electron-Rich Porous Organic Polymers via Schiff-Base Chemistry for Efficient Iodine Capture

As one of the main nuclear wastes generated in the process of nuclear fission, radioactive iodine has attracted worldwide attention due to its harm to public safety and environmental pollution. Therefore, it is of crucial importance to develop materials that can rapidly and efficiently capture radioactive iodine. Herein, we report the construction of three electron-rich porous organic polymers (POPs), denoted as POP-E, POP-T and POP-P via Schiff base polycondensations reactions between Td-symmetric adamantane knot and four-branched “linkage” molecules. We demonstrated that all the three POPs showed high iodine adsorption capability, among which the adsorption capacity of POP-T for iodine vapor reached up to 3.94 g·g⁻¹ and the removal rate of iodine in n-hexane solution was up to 99%. The efficient iodine capture mechanism of the POP-T was investigated through systematic comparison of Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) before and after iodine adsorption. The unique π-π conjugated system between imine bonds linked aromatic rings with iodine result in charge-transfer complexes, which explains the exceptional iodine capture capacity. Additionally, the introduction of heteroatoms into the framework would also enhance the iodine adsorption capability of POPs. Good retention behavior and recycling capacity were also observed for the POPs.

Efficient Separation of Trace SO2 from SO2/CO2/N2 Mixtures in a Th-Based MOF

The emission of sulfur dioxide (SO₂) from flue gases is harmful since trace SO₂ impairs human health and the natural environment. Therefore, developing new metal organic frameworks (MOFs) to capture this toxic molecule is of great importance in flue gas desulfurization. In this work, we synthesized a new MOF, namely, ECUT-Th-60, which consists of two distinct channels (3.0 Å × 4.1 Å and 2.3 Å × 4.8 Å). It shows SO₂ uptakes of around 2.5 mmol/g at 0.1 kPa and 3.35 mmol/g at 1 bar, which are higher than those of CO₂ and N₂ under identical conditions. Both simulated and experimental breakthrough tests proved that ECUT-Th-60 can separate trace SO₂ from SO₂/CO₂ mixtures. Impressively, complete separation of SO₂ from SO₂/CO₂/N₂ mixtures under both dry and humid conditions was also proved in ECUT-Th-60, predicting its potential application in flue gas desulfurization.

HF Resistant Porous Aromatic Frameworks for Electronic Special Gases Separation

Here we report two HF acid resistant porous aromatic frameworks as adsorbents for high value-added electronic special gases (e.g., SF₆, NF₃, CF₄, Xe, Kr) separation. The New-PAF-1 and N-SO₃H exhibit exceptional adsorption selectivity for Xe and F-gases from semiconductor exhaust gas along with high physicochemical stability and excellent reusability, which have been collaboratively confirmed by single-component gas adsorption experiments, time-dependent adsorption rate tests, dynamic breakthrough experiments and regeneration tests. The theoretical calculations based on DFT and Mulliken atomic charge analyses elucidated the adsorption mechanism of New-PAF-1 and N-SO₃H toward F-gases, Xe, Kr, and N₂ at molecular level, including adsorption site, binding energy and electrostatic potentials distribution. The systematic investigation sufficiently manifests that PAFs can act as highly stable porous adsorbents in harsh operating conditions.

Tailoring a robust Al-MOF for trapping C2H6 and C2H2 towards efficient C2H4 purification from quaternary mixtures

Light hydrocarbon separation is considered one of the most industrially challenging and desired chemical separation processes and is highly essential in polymer and chemical industries. Among them, separating ethylene (C₂H₄) from C2 hydrocarbon mixtures such as ethane (C₂H₆), acetylene (C₂H₂), and other natural gas elements (CO₂, CH₄) is of paramount importance and poses significant difficulty. We demonstrate such separations using an Al-MOF synthesised earlier as a non-porous material, but herein endowed with hierarchical porosity created under microwave conditions in an equimolar water/ethanol solution. The material possessing a large surface area (793 m² g⁻¹) exhibits an excellent uptake capacity for major industrial hydrocarbons in the order of C₂H₂ > C₂H₆ > CO₂ > C₂H₄ > CH₄ under ambient conditions. It shows an outstanding dynamic breakthrough separation of ethylene (C₂H₄) not only for a binary mixture (C₂H₆/C₂H₄) but also for a quaternary combination (C₂H₄/C₂H₆/C₂H₂/CO₂ and C₂H₄/C₂H₆/C₂H₂/CH₄) of varying concentrations. The detailed separation/purification mechanism was unveiled by gas adsorption isotherms, mixed-gas adsorption calculations, selectivity estimations, advanced computer simulations such as density functional theory (DFT), grand canonical Monte Carlo (GCMC) and ab initio molecular dynamics (AIMD), and stepwise multicomponent dynamic breakthrough experiments.

Industrially important C₂H₄ purification from multi-component hydrocarbon mixtures.

Water-Dispersible Porous Aromatic Frameworks with Quasi-Amino Acid Structures via N-H Insertion Reactions

As a class of materials with large specific surface area and chemical stability, porous aromatic frameworks (PAFs) have attracted much attention in the fields of gas adsorption, separation, and catalysis. However, synthetic methods for PAFs have been limited to a few coupling reactions, and PAF powders were usually obtained with a diameter of micrometer size. Here, we demonstrate an efficient N-H insertion reaction of diazoesters in the synthesis of PAFs with a diameter <200 nm. The established polymerization can be performed at room temperature, and four PAFs with different skeletons and composition can be obtained in high yields. The prepared PAFs have appreciable thermal and chemical stabilities. Because of the presence of ester groups in the backbone, the prepared PAFs with α-phenylglycine fragments can be easily obtained through the successive hydrolysis of the ester groups. The synthesized PAFs bearing phenylglycine moieties exhibit good water dispersibility and low cytotoxicity. We further show the potential of these PAFs in drug loading and photodynamic therapy.

Installation of synergistic binding sites onto porous organic polymers for efficient removal of perfluorooctanoic acid

Herein, we report a strategy to construct highly efficient perfluorooctanoic acid (PFOA) adsorbents by installing synergistic electrostatic/hydrophobic sites onto porous organic polymers (POPs). The constructed model material of PAF-1-NDMB (NDMB = N,N-dimethyl-butylamine) demonstrates an exceptionally high PFOA uptake capacity over 2000 mg g^-1, which is 14.8 times enhancement compared with its parent material of PAF-1. And it is 32.0 and 24.1 times higher than benchmark materials of DFB-CDP (β-cyclodextrin (β-CD)-based polymer network) and activated carbon under the same conditions. Furthermore, PAF-1-NDMB exhibits the highest k₂ value of 24,000 g mg^-1 h^-1 among all reported PFOA sorbents. And it can remove 99.99% PFOA from 1000 ppb to <70 ppt within 2 min, which is lower than the advisory level of Environmental Protection Agency of United States. This work thus not only provides a generic approach for constructing PFOA adsorbents, but also develops POPs as a platform for PFOA capture.

Computational Screening of Metal-Organic Frameworks for Ethylene Purification from Ethane/Ethylene/Acetylene Mixture

Identification of high-performing sorbent materials is the key step in developing energy-efficient adsorptive separation processes for ethylene production. In this work, a computational screening of metal-organic frameworks (MOFs) for the purification of ethylene from the ternary ethane/ethylene/acetylene mixture under thermodynamic equilibrium conditions is conducted. Modified evaluation metrics are proposed for an efficient description of the performance of MOFs for the ternary mixture separation. Two different separation schemes are proposed and potential MOF adsorbents are identified accordingly. Finally, the relationships between the MOF structural characteristics and its adsorption properties are discussed, which can provide valuable information for optimal MOF design.

Robust and Radiation-Resistant Hofmann-Type Metal-Organic Frameworks for Record Xenon/Krypton Separation

The discovery of high-performance adsorbents for highly efficient separation of xenon from krypton is an important but challenging task in the chemical industry due to their similar size and inert spherical nature. Herein, we report two robust and radiation-resistant Hofmann-type MOFs, Co(pyz)[Ni(CN)₄] and Co(pyz)[Pd(CN)₄] (termed as ZJU-74a-Ni and ZJU-74a-Pd), featuring oppositely adjacent open metal sites and perfect pore sizes (4.1 and 3.8 Å) comparable to the kinetic diameter of xenon (4.047 Å), affording the benchmark binding affinity for polarizable Xe gas. These materials thus exhibit both record-high Xe uptake capacities (89.3 and 98.4 cm³ cm^-3 at 296 K and 0.2 bar) and Xe/Kr selectivities (74.1 and 103.4) at ambient conditions, all of which are the highest among all the state-of-the-art materials reported so far. The locations of Xe molecules within ZJU-74a-Ni have been visualized by single-crystal X-ray diffraction studies, in which two oppositely adjacent metal centers combined with the right aperture size can construct a unique sandwich-like binding site to offer unprecedented and ultrastrong Ni²⁺-Xe-Ni²⁺ interactions with xenon, thus leading to the record Xe capture capacity and selectivity. The excellent separation capacity of ZJU-74a-Pd was verified by breakthrough experiments for Xe/Kr gas mixtures, providing both unprecedentedly high xenon uptake capacity (4.63 mmol cm^-3) and krypton productivity (214 cm³ g^-1).

Immobilization of Lewis Basic Sites into a Stable Ethane-Selective MOF Enabling One-Step Separation of Ethylene from a Ternary Mixture

Purification of C₂H₄ from a ternary C₂H₂/C₂H₆/C₂H₄ mixture by one-step adsorption separation is of prime importance but challenging in the petrochemical industry; however, effective strategies to design high-performance adsorbents are lacking. We herein report for the first time the incorporation of Lewis basic sites into a C₂H₆-selective MOF, enabling efficient one-step production of polymer-grade C₂H₄ from ternary mixtures. Introduction of amino groups into highly stable C₂H₆-selective UiO-67 can not only partition large pores into smaller cagelike pockets to provide suitable pore confinement but also offer additional binding sites to simultaneously enhance C₂H₂ and C₂H₆ adsorption capacities over C₂H₄. The amino-functionalized UiO-67-(NH₂)₂ thus exhibits exceptionally high C₂H₂ and C₂H₆ uptakes as well as benchmark C₂H₂/C₂H₄ and C₂H₆/C₂H₄ selectivities, surpassing all of the C₂H₂/C₂H₆-selective materials reported so far. Theoretical calculations combined with in situ infrared spectroscopy indicate that the synergetic effect of suitable pore confinement and functional surfaces decorated with amino groups provides overall stronger multipoint van der Waals interactions with C₂H₂ and C₂H₆ over C₂H₄. The exceptional performance of UiO-67-(NH₂)₂ was evidenced by breakthrough experiments for C₂H₂/C₂H₆/C₂H₄ mixtures under dry and wet conditions, providing a remarkable C₂H₄ productivity of 0.55 mmol g^-1 at ambient conditions.

Emerging porous organic polymers for biomedical applications

This review summarizes and discusses the recent progress in porous organic polymers for diverse biomedical applications such as drug delivery, biomacromolecule immobilization, phototherapy, biosensing, bioimaging, and antibacterial applications.

A new porphyrinic vanadium-based MOF constructed from infinite V(OH)O4 chains: syntheses, characterization and photoabsorption properties

A new porphyrinic vanadium-based metal–organic framework (MOF), namely V-MOF-10 [V2(OH)2(H2TCPP)], constructed from {V(OH)O4}∞ chains and 4-tetracarboxyphenylporphyrin linkers, was synthesized by a solvothermal procedure.

High-performance removal of radionuclides by porous organic frameworks from the aquatic environment: A review

Dealing with unwanted nuclear waste is still a serious issue from the point of view of humans and the environment because of its harmful and dangerous effects. Recently, porous organic frameworks (POFs) have gained an increasing concern as effective materials in the removal of various types of hazardous metal ions, especially radioactive metal ions. POFs are a unique class that included covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) with strong covalent bonds, large surface area, high adsorption capacity, tunable porosity, and a porous structure with more efficient than conventional adsorbents. This review highlights the recent developments of POFs for the rapid elimination of radionuclide. The unique characteristics, adsorption properties, and interaction mechanisms between radioactive metal ions and the POF-based materials are summarized. Also, prospects for enhancing the performance of POFs to capture radioactive metal ions are discussed.

A Molecular Compound for Highly Selective Purification of Ethylene

Purification of C₂ H₄ from an C₂ H₄ /C₂ H₆ mixture is one of the most challenging separation processes, which is achieved mainly through energy-intensive, cryogenic distillation in industry. Sustainable, non-distillation methods are highly desired as alternatives. We discovered that the fluorinated bis(pyrazolyl)borate ligand supported copper(I) complex {[(CF₃ )₂ Bp]Cu}₃ has features very desirable in an olefin-paraffin separation material. It binds ethylene exclusively over ethane generating [(CF₃ )₂ Bp]Cu(C₂ H₄ ). This molecular compound exhibits extremely high and record ideal adsorbed solution theory (IAST) C₂ H₄ /C₂ H₆ gas separation selectivity, affording high purity (>99.5 %) ethylene that can be readily desorbed from separation columns. In-situ PXRD provides a "live" picture of the reversible conversion between [(CF₃ )₂ Bp]Cu(C₂ H₄ ) and the ethylene-free sorbent in the solid-state, driven by the presence or removal of C₂ H₄ . Molecular structures of trinuclear {[(CF₃ )₂ Bp]Cu}₃ and mononuclear [(CF₃ )₂ Bp]Cu(C₂ H₄ ) are also presented.

Ethylene/ethane separation in a stable hydrogen-bonded organic framework through a gating mechanism

Porous materials are very promising for the development of cost- and energy-efficient separation processes, such as for the purification of ethylene from ethylene/ethane mixture-an important but currently challenging industrial process. Here we report a microporous hydrogen-bonded organic framework that takes up ethylene with very good selectivity over ethane through a gating mechanism. The material consists of tetracyano-bicarbazole building blocks held together through intermolecular CN···H-C hydrogen bonding interactions, and forms as a threefold-interpenetrated framework with pores of suitable size for the selective capture of ethylene. The hydrogen-bonded organic framework exhibits a gating mechanism in which the threshold pressure required for guest uptake varies with the temperature. Ethylene/ethane separation is validated by breakthrough experiments with high purity of ethylene (99.1%) at 333 K. Hydrogen-bonded organic frameworks are usually not robust, yet this material was stable under harsh conditions, including exposure to strong acidity, basicity and a variety of highly polar solvents.

Efficient CO2/CO separation in a stable microporous hydrogen-bonded organic framework

We herein realize the first example of using a microporous HOF material (ZJU-HOF-1) with suitable pore cavities for highly efficient CO₂/CO separation under dry and humid conditions.

Elucidating the mechanisms of Paraffin-Olefin separations using nanoporous adsorbents: An overview

Light olefins are the precursors of all modern-day plastics. Olefin is always mixed with paraffins in the time of production, and therefore it needs to be separated from paraffins to produce polymer-grade olefin. The state-of-the-art separation technique, cryogenic distillation, is highly expensive and hazardous. Adsorption could be a novel, sustainable, and inexpensive separation strategy, provided a suitable adsorbent can be designed. There are different types of mechanisms that were harnessed for the separation of olefins by adsorption, and in this review, we have focused our discussion on those mechanisms. These mechanisms include, (a) Affinity-based separation, like pi complexation and hydrogen bonding, (b) Separation based on pore size and shape, like size-exclusion and gate-opening effect, and (c) Non-equilibrium separation, like kinetic separation. In this review, we have elaborated each of the separation strategies from the fundamental level and explained their roles in the separation processes of different types of paraffins and olefins.

Control of Functionalized Pore Environment in Robust Ionic Ultramicroporous Polymers for Efficient Removal of Trace Propyne from Propylene

Separating trace propyne from propylene is of great importance in the petrochemical industry but difficult because of very close molecular sizes and physicochemical properties, which promotes the development of high-performance porous materials with great stability in practical adsorptive separation; however, a limited number of efficient adsorbents have been reported. Here, a class of robust functionalized ionic ultramicroporous polymers (IUPs) with different branched structures that feature high-density preferential anionic binding sites and outstanding thermal and water stability is systematically studied for the separation of propyne and propylene for the first time. The functionalized pore environment of IUPs achieves the highest selectivity of propyne and propylene (126.5) for the 1/99 (v/v) mixture among porous organic polymers, as well as excellent and recyclable dynamic separation performance. Modeling studies reveal that strong basic sites of IUPs with abundant ultramicroporosity facilitate the efficient removal of propyne from propylene. This study provides important clues for the design of robust functionalized adsorbents and thus expands the currently limited dictionary of adsorbents for the separation of important gas mixtures.

Observation of an Intermediate to H2 Binding in a Metal-Organic Framework

Coordinatively unsaturated metal sites within certain zeolites and metal-organic frameworks can strongly adsorb a wide array of substrates. While many classical examples involve electron-poor metal cations that interact with adsorbates largely through physical interactions, unsaturated electron-rich metal centers housed within porous frameworks can often chemisorb guests amenable to redox activity or covalent bond formation. Despite the promise that materials bearing such sites hold in addressing myriad challenges in gas separations and storage, very few studies have directly interrogated mechanisms of chemisorption at open metal sites within porous frameworks. Here, we show that nondissociative chemisorption of H₂ at the trigonal pyramidal Cu⁺ sites in the metal-organic framework Cu^I-MFU-4l occurs via the intermediacy of a metastable physisorbed precursor species. In situ powder neutron diffraction experiments enable crystallographic characterization of this intermediate, the first time that this has been accomplished for any material. Evidence for a precursor intermediate is also afforded from temperature-programmed desorption and density functional theory calculations. The activation barrier separating the precursor species from the chemisorbed state is shown to correlate with a change in the Cu⁺ coordination environment that enhances π-backbonding with H₂. Ultimately, these findings demonstrate that adsorption at framework metal sites does not always follow a concerted pathway and underscore the importance of probing kinetics in the design of next-generation adsorbents.

Separation and Purification of Hydrocarbons with Porous Materials

This Minireview focuses on the developments of the adsorptive separation of methane/nitrogen, ethene/ethane, propene/propane mixtures as well as on the separation of C8 aromatics (i.e. xylene isomers) with a wide variety of materials, including carbonaceous materials, zeolites, metal-organic frameworks, and porous organic frameworks. Some recent important developments for these adsorptive separations are also highlighted. The advantages and disadvantages of each material category are discussed and guidelines for the design of improved materials are proposed. Furthermore, challenges and future developments of each material type and separation processes are discussed.