Fullerene Van der Waals Oligomers as Electron Traps

Tailoring the Weight of Surface and Intralayer Edge States to Control LUMO Energies

The energies of the frontier molecular orbitals determine the optoelectronic properties in organic films, which are crucial for their application, and strongly depend on the morphology and supramolecular structure. The impact of the latter two properties on the electronic energy levels relies primarily on nearest-neighbor interactions, which are difficult to study due to their nanoscale nature and heterogeneity. Here, an automated method is presented for fabricating thin films with a tailored ratio of surface to bulk sites and a controlled extension of domain edges, both of which are used to control nearest-neighbor interactions. This method uses a Langmuir-Schaefer-type rolling transfer of Langmuir layers (rtLL) to minimize flow during the deposition of rigid Langmuir layers composed of π-conjugated molecules. Using UV-vis absorption spectroscopy, atomic force microscopy, and transmission electron microscopy, it is shown that the rtLL method advances the deposition of multi-Langmuir layers and enables the production of films with defined morphology. The variation in nearest-neighbor interactions is thus achieved and the resulting systematically tuned lowest unoccupied molecular orbital (LUMO) energies (determined via square-wave voltammetry) enable the establishment of a model that functionally relates the LUMO energies to a morphological descriptor, allowing for the prediction of the range of accessible LUMO energies.

Grape bunches of novel conjugated chain bonded fullerene oligomers: design of a potential electron trap carbonaceous molecular material

Developing π electron conjugated groups as covalent bonded bridges between fullerenes in their oligomers is key to optimizing and maximizing functions of the fullerene-based materials. In this work, a series of novel conjugated chain bonded fullerene C₆₀ oligomers (CBFOs) with a well-defined nano-architecture and "grape bunches" shapes are rationally designed and viably constructed based on fullerene-carbenes by means of DFT calculations. The results show that the presently designed CBFOs present a much better electron-accepting ability together with a much lower reorganization energy than the isolated fullerene C₆₀, and characterized as the potential ideal candidate for electron acceptors. The frontier molecular orbital and electron density analysis can well support the results of diabatic electron affinity (EA_a) and vertical electron affinity (EA_v) calculations. Moreover, these CBFOs exhibit strong absorption in the visible region but no obvious absorption in the ultraviolet region. In addition, the optical properties of the CBFOs and two dimensional structure are also simulated and explored theoretically. We hope that the present study would be helpful for developing covalent-bonded-fullerene based electron trap molecular materials, building blocks of nano-devices and nano-machinery applications.

M6L12 Nanospheres with Multiple C70 Binding Sites for 1O2 Formation in Organic and Aqueous Media

Singlet oxygen is a potent oxidant with major applications in organic synthesis and medicinal treatment. An efficient way to produce singlet oxygen is the photochemical generation by fullerenes which exhibit ideal thermal and photochemical stability. In this contribution we describe readily accessible M₆L₁₂ nanospheres with unique binding sites for fullerenes located at the windows of the nanospheres. Up to four C₇₀ can be associated with a single nanosphere, presenting an efficient method for fullerene extraction and application. Depending on the functionality located on the outside of the sphere, they act as vehicles for ¹O₂ generation in organic or in aqueous media using white LED light. Excellent productivity in ¹O₂ generation and consecutive oxidation of ¹O₂ acceptors using C₇₀⊂[Pd₆L₁₂], C₆₀⊂[Pd₆L₁₂] or fullerene soot extract was observed. The methodological design principles allow preparation and application of highly effective multifullerene binding spheres.

Light-intensity-dependent photoresponse time of organic photodetectors and its molecular origin

Organic photodetectors (OPDs) exhibit superior spectral responses but slower photoresponse times compared to inorganic counterparts. Herein, we study the light-intensity-dependent OPD photoresponse time with two small-molecule donors (planar MPTA or twisted NP-SA) co-evaporated with C60 acceptors. MPTA:C60 exhibits the fastest response time at high-light intensities (>0.5 mW/cm2), attributed to its planar structure favoring strong intermolecular interactions. However, this blend exhibits the slowest response at low-light intensities, which is correlated with biphasic photocurrent transients indicative of the presence of a low density of deep trap states. Optical, structural, and energetical analyses indicate that MPTA molecular packing is strongly disrupted by C60, resulting in a larger (370 meV) HOMO level shift. This results in greater energetic inhomogeneity including possible MPTA-C60 adduct formation, leading to deep trap states which limit the low-light photoresponse time. This work provides important insights into the small molecule design rules critical for low charge-trapping and high-speed OPD applications.

Macroscopic quantum electrodynamics and density functional theory approaches to dispersion interactions between fullerenes

The processing and material properties of commercial organic semiconductors, for e.g. fullerenes is largely controlled by their precise arrangements, specially intermolecular symmetries, distances and orientations, more specifically, molecular polarisabilities. These supramolecular parameters heavily influence their electronic structure, thereby determining molecular photophysics and therefore dictating their usability as n-type semiconductors. In this article we evaluate van der Waals potentials of a fullerene dimer model system using two approaches: (a) Density Functional Theory and, (b) Macroscopic Quantum Electrodynamics, which is particularly suited for describing long-range van der Waals interactions. Essentially, we determine and explain the model symmetry, distance and rotational dependencies on binding energies and spectral changes. The resultant spectral tuning is compared using both methods showing correspondence within the constraints placed by the different model assumptions. We envision that the application of macroscopic methods and structure/property relationships laid forward in this article will find use in fundamental supramolecular electronics.

Semiconducting Supramolecular Organic Frameworks Assembled from a Near-Infrared Fluorescent Macrocyclic Probe and Fullerenes

We report here a new extended tetrathiafulvalene (exTTF)-porphyrin scaffold, 2, that acts as a ball-and-socket receptor for C₆₀ and C₇₀. Supramolecular interactions between 2 and these fullerenes serve to stabilize 3D supramolecular organic frameworks (SOFs) in the solid state formally comprising peapod-like linear assemblies. The SOFs prepared via self-assembly in this way act as "tunable functional materials", wherein the complementary geometry of the components and the choice of fullerene play crucial roles in defining the conductance properties. The highest electrical conductivity (σ = 1.3 × 10^-8 S cm^-1 at 298 K) was observed in the case of the C₇₀-based SOF. In contrast, low conductivity was seen for the SOF based on pristine 2 (σ = 5.9 × 10^-11 S cm^-1 at 298 K). The conductivity seen for the C₇₀-based SOF approaches that seen for other TTF- and fullerene-based supramolecular materials despite the fact that the present systems are metal-free and constructed entirely from neutral building blocks. Transient absorption spectroscopic measurements corroborated the formation of charge-transfer states (i.e., 2^δ+/C₆₀^δ- and 2^δ+/C₇₀^δ-, respectively) rather than fully charge separated states (i.e., 2^•+/C₆₀^•- and 2^•+/C₇₀^•-, respectively) both in solution (toluene and benzonitrile) and in the solid state at 298 K. Such findings are considered consistent with an ability to transfer charges effectively over long distances within the present SOFs, rather than, for example, the formation of energetically trapped ionic species.

NWPEsSe: An Adaptive-Learning Global Optimization Algorithm for Nanosized Cluster Systems

Global optimization constitutes an important and fundamental problem in theoretical studies in many chemical fields, such as catalysis, materials, or separations problems. In this paper, a novel algorithm has been developed for the global optimization of large systems including neat and ligated clusters in the gas phase and supported clusters in periodic boundary conditions. The method is based on an updated artificial bee colony (ABC) algorithm method, that allows for adaptive-learning during the search process. The new algorithm is tested against four classes of systems of diverse chemical nature: gas phase Au₅₅, ligated Au₈²⁺, Au₈ supported on graphene oxide and defected rutile, and a large cluster assembly [Co₆Te₈(PEt₃)₆][C₆₀]_n, with sizes ranging between 1 and 3 nm and containing up to 1300 atoms. Reliable global minima (GMs) are obtained for all cases, either confirming published data or reporting new lower energy structures. The algorithm and interface to other codes in the form of an independent program, Northwest Potential Energy Search Engine (NWPEsSe), is freely available, and it provides a powerful and efficient approach for global optimization of nanosized cluster systems.

Enhancing the supramolecular stability of monolayers by combining dipolar with amphiphilic motifs: a case of amphiphilic push-pull-thiazole

Equipping a thiazole dye with push and pull moieties adds dipolar intermolecular interactions and two hydrophilic anchors to a centrally anchored π-stacking and otherwise mono-amphiphilic dye. We show that, despite the resulting irregular shape of the tripodal amphiphile, the enhanced intermolecular interactions and amphiphilicity yield smooth and stable thin films. Furthermore, we present a first approach for deriving supramolecular binding energies from the Langmuir-Blodgett hysteresis data.

Charged Clusters of C60 and Au or Cu: Evidence for Stable Sizes and Specific Dissociation Channels

We have doped helium nanodroplets with C60 and either gold or copper. Positively or negatively charged (C60) mM n± ions (M = Au or Cu) containing up to ≈10 fullerenes and ≈20 metal atoms are formed by electron ionization. The abundance distributions extracted from high-resolution mass spectra reveal several local anomalies. The sizes of the four most stable (C60) mAu n± ions identified in previous calculations for small values of m and n ( m ≤ 2 and n ≤ 2, or m = 1 and n = 3) agree with local maxima in the abundance distributions. Our data suggest the existence of several other relatively stable ions including (C60)2Au3± and (C60)3Au4-. Another feature, namely the absence of bare (C60)2±, confirms the prediction that (C60)2M± dissociates by loss of C60± rather than loss of M. The experimental data also reveal the preference for loss of (charged or neutral) C60 over loss of a metal atom from some larger species such as (C60)3M3+. In contrast to these similarities between Au and Cu, the abundance distributions of (C60)3Au n- and (C60)3Cu n- are markedly different. In this discussion, we emphasize the similarities and differences between anions and cations, and between gold and copper. Also noteworthy is the observation of dianions (C60) mAu n2- for m = 2, 4, and 6.

Remote Control of Anion-π Catalysis on Fullerene-Centered Catalytic Triads

The design, synthesis and evaluation of catalytic triads composed of a central C60 fullerene with an amine base on one side and polarizability enhancers on the other side are reported. According to an enolate addition benchmark reaction, fullerene-fullerene-amine triads display the highest selectivity in anion-π catalysis observed so far, whereas NDI-fullerene-amine triads are not much better than fullerene-amine controls (NDI=naphthalenediimide). These large differences in activity are in conflict with the small differences in intrinsic π acidity, that is, LUMO energy levels and π holes on the central fullerene. However, they are in agreement with the high polarizability of fullerene-fullerene-amine triads. Activation and deactivation of the fullerene-centered triads by intercalators and computational data on anion binding further indicate that for functional relevance, intrinsic π acidity is less important than induced π acidity, that is, the size of the oriented macrodipole of polarizable π systems that emerges only in response to the interaction with anions and anionic transition states. The resulting transformation is thus self-induced, the anionic intermediates and transition states create their own anion-π catalyst.

Reducing density-driven error without exact exchange

PBE calculations, performed non-self-consistently on densities evaluated with Rung 3.5 density functionals, give improved performance for hydrogen transfer reaction barriers.

Controlling Electronic Transitions in Fullerene van der Waals Aggregates via Supramolecular Assembly

Morphologies crucially determine the optoelectronic properties of organic semiconductors. Therefore, hierarchical and supramolecular approaches have been developed for targeted design of supramolecular ensembles of organic semiconducting molecules and performance improvement of, e.g., organic solar cells (OSCs), organic light emitting diodes (OLEDs), and organic field-effect transistors (OFETs). We demonstrate how the photonic properties of fullerenes change with the formation of van der Waals aggregates. We identified supramolecular structures with broadly tunable absorption in the visible spectral range and demonstrated how to form aggregates with targeted visible (vis) absorption. To control supramolecular structure formation, we functionalized the C60-backbone with polar (bis-polyethylene glycol malonate-MPEG) tails, thus yielding an amphiphilic fullerene derivative that self-assembles at interfaces. Aggregates of systematically tuned size were obtained from concentrating MPEGC60 in stearic acid matrices, while different supramolecular geometries were provoked via different thin film preparation methods, namely spin-casting and Langmuir-Blodgett (LB) deposition from an air-water interface. We demonstrated that differences in molecular orientation in LB films (C2v type point group aggregates) and spin-casting (stochastic aggregates) lead to huge changes in electronic absorption spectra due to symmetry and orientation reasons. These differences in the supramolecular structures, causing the different photonic properties of spin-cast and LB films, could be identified by means of quantum chemical calculations. Employing supramolecular assembly, we propounded that molecular symmetry in fullerene aggregates is extremely important in controlling vis absorption to harvest photons efficiently, when mixed with a donor molecule, thus improving active layer design and performance of OSCs.

Optical control of neuronal firing via photoinduced electron transfer in donor-acceptor conjugates

A rationally designed donor–acceptor conjugate efficiently generates a photoinduced charge-separated state in a cellular environment, achieving photoinduction of neuronal firing.

A series of porphyrin–fullerene linked molecules has been synthesized to evaluate the effects of substituents and molecular structures on their charge-separation yield and the lifetime of a final charge-separated state in various hydrophilic environments. The selected high-performance molecule effectively achieved depolarization in a plasma cell membrane by visible light as well as two-photon excitation using a near-infrared light laser. Moreover, it was revealed that the depolarization can trigger neuronal firing in rat hippocampal neurons, demonstrating the potential and versatility for controlling cell functions using light.

Biological applications of hydrophilic C60 derivatives (hC60s)- a structural perspective

Reactive oxygen species (ROS) generation and radical scavenging are dual properties of hydrophilic C60 derivatives (hC60s). hC60s eliminate radicals in dark, while they produce reactive oxygen species (ROS) in the presence of irradiation and oxygen. Compared to the pristine C60 suspension, the aqueous solution of hC60s is easier to handle in vivo. hC60s are diverse and could be placed into two general categories: covalently modified C60 derivatives and pristine C60 solubilized non-covalently by macromolecules. In order to present in detail, the above categories are broken down into 8 parts: C60(OH)n, C60 with carboxylic acid, C60 with quaternary ammonium salts, C60 with peptide, C60 containing sugar, C60 modified covalently or non-covalently solubilized by cyclodextrins (CDs), pristine C60 delivered by liposomes, functionalized C60-polymer and pristine C60 solubilized by polymer. Each hC60 shows the propensity to be ROS producer or radical scavenger. This preference is dependent on hC60s structures. For example, major application of C60(OH)n is radical scavenger, while pristine C60/γ-CD complex usually serves as ROS producer. In addition, the electron acceptability and innate hydrophobic surface confer hC60s with O2 uptake inhibition, HIV inhibition and membrane permeability. In this review, we summarize the preparation methods and biological applications of hC60s according to the structures.

[60]Fullerenyl amino acids and peptides: a review of their synthesis and applications

This review reports on the latest progress in the synthesis of fullerenyl amino acids and related derivatives, and categorises the molecules into functional types for different uses: these include directly attached fullerenyl amino acids, fullerenyl N- and C-capping amino acids, and those amino acids in which the [60]fullerene group is attached to the amino acid side chain.