Highly Versatile Catalytic Hydrogenation of Carboxylic and Carbonic Acid Derivatives using a Ru-Triphos Complex: Molecular Control over Selectivity and Substrate Scope

Chemoselective Hydrogenolysis of Urethanes to Formamides and Alcohols in the Presence of More Electrophilic Carbonyl Compounds

The development of methods for the chemical recycling of polyurethanes is recognized as an urgent issue. Herein, we report the Ir-catalyzed hydrogenolysis of the urethane C-O bond to produce formamides and alcohols, where both formamides and ester and amide functionalities are tolerated. The chemoselectivity observed is counterintuitive to the generally accepted electrophilicity order of carbonyl compounds. Hydrogenolysis of urea and isocyanurate, potential byproducts in the polycondensation process of polyurethanes, is also achieved alongside the selective degradation of polyurethanes themselves, which affords diformamides and diols. The time-course of the hydrogenative polyurethane degradation reveals that the bond cleavage occurs not from the terminal, but from any part of the polymer chain. The present catalysis offers a novel method for the recycling of polyurethane-containing polymer waste.

Counterintuitive chemoselectivity in the reduction of carbonyl compounds

The reactivity of carbonyl functional groups largely depends on the substituents on the carbon atom. Reversal of the commonly accepted order of reactivity of different carbonyl compounds requires novel synthetic approaches. Achieving selective reduction will enable the transformation of carbon resources such as plastic waste, carbon dioxide and biomass into valuable chemicals. In this Review, we explore the reduction of less reactive carbonyl groups in the presence of those typically considered more reactive. We discuss reductions, including the controlled reduction of ureas, amides and esters to aldehydes, as well as chemoselective reductions of carbonyl groups, including the reduction of ureas over carbamates, amides and esters; the reduction of amides over esters, ketones and aldehydes; and the reduction of ketones over aldehydes.

Desymmetric Hydrogenation of meso-Dicarboxylic Acids

Efficient transformation of platform chemicals into key intermediates has been increasingly important for the pharmaceutical industry. The development of the catalytic reduction of abundant carboxylic acids with molecular hydrogen has been of both practical and theoretical value. We herein report the homogeneous hydrogenation of dicarboxylic acids with the strategy of desymmetrization. Using a rhodium/bisphosphine catalyst, one carboxyl group of meso-diacids was selectively reduced to yield chiral lactones with satisfactory enantioselectivity. This method provides a straightforward approach to produce chiral lactone intermediates for the manufacture of biotin, telaprevir, and other antivirus drugs. Both experimental and computational investigations were carried out, revealing a novel neighboring group coordination mechanism in the catalytic cycle.

Electroreductive alkylations of (hetero)arenes with carboxylic acids

Carboxylic acids are widely available and generally inexpensive from abundant biomass feedstocks, and they are suitable and generic coupling partners in synthetic chemistry. Reported herein is an electroreductive coupling of stable and versatile carboxylic acids with (hetero)arenes using protons as the hydrogen source. The application of an earth-abundant titanium catalyst has significantly improved the deoxygenative reduction process. Preliminary mechanistic studies provide insights into the deoxygenative reduction of in-situ generated ketone pathway, and the intermediacy generation of ketyl radical and alkylidene titanocene. Without the necessity of pressurized hydrogen or stoichiometric hydride as reductants, this protocol enables highly selective and straightforward synthesis of various functionalized and structurally diverse alkylbenzenes under mild conditions. The utility of this reaction is further demonstrated through practical and valuable isotope incorporation from readily available deuterium source.

Switching the hydrogenation selectivity of urea derivatives via subtly tuning the amount and type of additive in the catalyst system

Catalytic hydrogenation of urea derivatives is considered to be one of the most feasible methods for indirect reduction functionalization of CO2 and synthesis of valuable chemicals and fuels. Among value-added products, methylamines, formamides and methanol are highly attractive as important industrial raw materials. Herein, we report the highly selective catalytic hydrogenation of urea derivatives to N-monomethylamines for the first time. More importantly, two- and six-electron reduction products can be switched on/off by subtly tuning 0.5 mol% KOtBu (2% to 1.5%): when the molar ratio of KOtBu/(PPh3)3RuCl2 exceeds 2.0, it is favorable for the formation of two-electron reduction products (N-formamides), while when it is below 2.0, the two-electron reduction products are further hydrogenated to six-electron reduction products (N-monomethylamines and methanol). Furthermore, changing the type of additive can also regulate this interesting selectivity. Control experiments showed that this selectivity is achieved by regulating the acid-base environment of the reaction to control the fate of the common hemiaminal intermediate. A feasible mechanism is proposed based on mechanistic experiments and characterization. This method has the advantages of being simple, universal and highly efficient, and opens up a new synthesis strategy for the utilization of renewable carbon sources.

Interdisciplinary development of an overall process concept from glucose to 4,5-dimethyl-1,3-dioxolane via 2,3-butanediol

To reduce carbon dioxide emissions, carbon-neutral fuels have recently gained renewed attention. Here we show the development and evaluation of process routes for the production of such a fuel, the cyclic acetal 4,5-dimethyl-1,3-dioxolane, from glucose via 2,3-butanediol. The selected process routes are based on the sequential use of microbes, enzymes and chemo-catalysts in order to exploit the full potential of the different catalyst systems through a tailor-made combination. The catalysts (microbes, enzymes, chemo-catalysts) and the reaction medium selected for each conversion step are key factors in the development of the respective production methods. The production of the intermediate 2,3-butanediol by combined microbial and enzyme catalysis is compared to the conventional microbial route from glucose in terms of specific energy demand and overall yield, with the conventional route remaining more efficient. In order to be competitive with current 2,3-butanediol production, the key performance indicator, enzyme stability to high aldehyde concentrations, needs to be increased. The target value for the enzyme stability is an acetaldehyde concentration of 600 mM, which is higher than the current maximum concentration (200 mM) by a factor of three.

Chemoselectivity change in catalytic hydrogenolysis enabling urea-reduction to formamide/amine over more reactive carbonyl compounds

The selective transformation of a less reactive carbonyl moiety in the presence of more reactive ones can realize straightforward and environmentally benign chemical processes. However, such a transformation is highly challenging because the reactivity of carbonyl compounds, one of the most important functionalities in organic chemistry, depends on the substituents on the carbon atom. Herein, we report an Ir catalyst for the selective hydrogenolysis of urea derivatives, which are the least reactive carbonyl compounds, affording formamides and amines. Although formamide, as well as ester, amide, and carbamate substituents, are considered to be more reactive than urea, the proposed Ir catalyst tolerated these carbonyl groups and reacted with urea in a highly chemoselective manner. The proposed chemo- and regioselective hydrogenolysis allows the development of a strategy for the chemical recycling of polyurea resins.

Synthesis and catalytic performance of nickel phosphinite pincer complexes in deoxygenative hydroboration of amides

A series of imino-POCN^R, amino-POCN^R2, and bis(phosphinite) POCOP pincer complexes of Ni(II) were prepared and tested in catalytic deoxygenative hydroboration of amides with HBPin to the corresponding amines. In contrast to the deoxygenative hydrosilylation approach, primarily developed for tertiary amides, superior reactivity in Ni-catalyzed deoxygenative hydroboration was demonstrated for secondary carboxamides. The bis(phosphinite) hydride complex (POCOP)NiH proved the most active in these reactions, tolerating potentially reducible functionalities such as internal alkenes, esters, nitriles, heteroaromatic compounds, and tertiary amides. Preferable hydroboration of secondary amides was also demonstrated in the presence of primary amide functionalities. The reactions were conducted at 60-80 °C, representing a rare example of a base-metal catalytic system for selective deoxygenation of secondary amides to the corresponding amines under mild conditions. In contrast to secondary amides, deoxygenative hydroboration of primary amides was demonstrated using an iminophosphinite pre-catalyst (POCN^Dmp)Ni(CH₂TMS) (Dmp = 2,6-Me₂C₆H₃). Deoxygenation reactions were suggested to proceed via a direct C-O bond cleavage mechanism, which is triggered by dehydrogenative N-borylation to access more electrophilic N-borylamides amenable to the addition of HBPin to the carbonyl group.

Aluminium-Catalyzed Selective Hydroboration of Esters and Epoxides to Alcohols: C-O Bond Activation

In this work, the molecular aluminium dihydride complex bearing an N, N'-chelated conjugated bis-guanidinate (CBG) ligand is used as a catalyst for reducing a wide range of aryl and alkyl esters with good tolerance of alkene (C=C), alkyne (C≡C), halides (Cl, Br, I and F), nitrile (C≡N), and nitro (NO₂ ) functionalities. Further, we investigated the catalytic application of aluminium dihydride in the C-O bond cleavage of alkyl and aryl epoxides into corresponding branched Markovnikov ring-opening products. In addition, the chemoselective intermolecular reduction of esters over other reducible functional groups, such as amides and alkenes, has been established. Intermediates are isolated and characterized by NMR and HRMS studies, which confirm the probable catalytic cycles for the hydroboration of esters and epoxides.

A Safer Reduction of Carboxylic Acids with Titanium Catalysis

Ammonia-borane, shown previously to react with carboxylic acids under reflux to form primary amides, reduces acids to alcohols at room temperature in the presence of catalytic TiCl4. The process, which is tolerant of a variety of potentially reactive functional groups, including N-protected amino acids, can be employed for the selective reduction of acids in the presence of amides, nitriles and, to some extent, esters. Aliphatic acids can be selectively reduced in the presence of aromatic acids.

Homogeneous Hydrogenation of CO2 and CO to Methanol: The Renaissance of Low-Temperature Catalysis in the Context of the Methanol Economy

The traditional economy based on carbon-intensive fuels and materials has led to an exponential rise in anthropogenic CO₂ emissions. Outpacing the natural carbon cycle, atmospheric CO₂ levels increased by 50 % since the pre-industrial age and can be directly linked to global warming. Being at the core of the proposed methanol economy pioneered by the late George A. Olah, the chemical recycling of CO₂ to produce methanol, a green fuel and feedstock, is a prime channel to achieve carbon neutrality. In this direction, homogeneous catalytic systems have lately been a major focus for methanol synthesis from CO₂ , CO and their derivatives as potential low-temperature alternatives to the commercial processes. This Review provides an account of this rapidly growing field over the past decade, since its resurgence in 2011. Based on the critical assessment of the progress thus far, the present key challenges in this field have been highlighted and potential directions have been suggested for practically viable applications.

Nickel-catalyzed hydrogenative coupling of nitriles and amines for general amine synthesis

Efficient and general methods for the synthesis of amines remain in high demand in the chemical industry. Among the many known processes, catalytic hydrogenation is a cost-effective and industrially proven reaction and currently used to produce a wide array of such compounds. We report a homogeneous nickel catalyst for hydrogenative cross coupling of a range of aromatic, heteroaromatic, and aliphatic nitriles with primary and secondary amines or ammonia. This general hydrogenation protocol is showcased by straightforward and highly selective synthesis of >230 functionalized and structurally diverse amines including pharmaceutically relevant and chiral products, as well as ¹⁵N-isotope labeling applications.

Organoaluminum hydrides catalyzed hydroboration of carbonates, esters, carboxylic acids, and carbon dioxide

The reductive functionalization of the CO unit of carbonates, carboxylic acids, esters, and CO₂, respectively has received great attention since its introduction. This method is often used industrially for the synthesis of high value-added energy products in chemistry. This opens up a new way forward to reduce greenhouse gases and the consumption of traditional energy sources. Herein, we report an earth-abundant, cheap, and readily available aluminum dihydride, which can catalyze the reduction of a range of carbonates, esters, carboxylic acids, and CO₂, respectively in the presence of pinacolborane as a reducing agent. Moreover, we demonstrate that the reaction can proceed to obtain good yield products under mild conditions, with low catalyst loading and solvent-free reactions. The mechanism of the catalytic reduction of carbonates has been investigated.

Catalytic hydrogenation of stearic acid to 1-octadecanol using supported bimetallic Pd–Sn(3.0)/γ–Al2O3 catalyst

Supported bimetallic palladium-tin catalyst on gamma-alumina (γ-Al2O3) (denoted as Pd–Sn(3.0)/γ-Al2O3; Pd = 5%wt and Pd/Sn molar ratio is 3.0) has been synthesized via the hydrothermal method at a temperature of 423 K for 24 h and reduced with H2 at 673 K for 3 h. The XRD patterns of the samples showed typical diffraction peaks of support γ-Al2O3, metallic Pd, Sn, and Pd–Sn alloy phases. Diffraction peaks of metallic Pd were observed at 2θ = 39.8°; 46.6°; and 68.0°, which can be attributed to the Pd(111), Pd(200), and Pd(220), respectively, while the diffraction peaks at 2θ = 39.8° and 41.0° can be attributed to Pd2Sn and Pd3Sn2, respectively, which may overlap with the Pd(111) species. The ammonia desorption and pyridine adsorption profiles showed Lewis and Brönsted acid sites. The specific surface area (SBET) of Pd–Sn(3.0)/γ-Al2O3 catalyst was 117.83 m2/g which is dominated by a micropore structure. The highest conversion of stearic acid was 99.1% with a yield of 1-octadecanol 43.2% was obtained at temperature 513 K, initial H2 pressure of 2.0 MPa, a reaction time of 13 h, and in 2-propanol/water (4.0:1.0 v/v) solvent.

An efficient catalytic method for the borohydride reaction of esters using diethylzinc as precatalyst

A cheap and easily available ZnEt2 is an effective precatalyst, which can be used for the hydroboration reaction of various organic carbonates and esters with HBpin.

Ru(dppbsa)-catalyzed hydrodeoxygenation and reductive etherification of ketones and aldehydes

Ru(dppbsa)-catalyzed hydrodeoxygenation and reductive etherification of ketones and aldehydes were developed. The carbonyl substrates without β-CH functionality follow the hydrogenation-hydrogenolysis path, wherein the hydrogenolysis of the alkanol intermediates presents as...

Deoxygenative hydroboration of carboxamides: a versatile and selective synthetic approach to amines

Deoxygenative reduction of amides is considered as an attractive method for preparation of synthetically valuable amines. However, the low electrophilicity of the amide carbonyl group, high thermodynamic stability and kinetic inertness of the amides make their reduction a challenging task. Until recently, most efforts for catalytic deoxygenation of amides to amines were concentrated on hydrogenation and hydrosilylation approaches, which mainly employed precious metal catalysts and often required harsh reaction conditions and showed insufficient selectivities. Moreover, these reactions are mostly limited to secondary and tertiary amides, whereas direct reduction of primary amides to primary amines remained arduous. In contrast, deoxygenative hydroboration of amides, although it appeared less then a decade ago, has already proved advantageous in terms of the amide scope, reaction conditions and selectivity of transformations. This article provides an overview of the developments in hydroboration of amides, focusing on mechanistic aspects of these transformations and advantages of hydroboration compared to hydrogenation and hydrosilylation approaches.

Depolymerization of Technical-Grade Polyamide 66 and Polyurethane Materials through Hydrogenation

Chemical recycling provides a promising solution to utilize plastic waste. Here, a catalytic hydrogenative depolymerization of polyamide 66 (PA 66) and polyurethane (PU) was developed. The system employed Ru pincer complexes at high temperature (200 °C) in THF solution, and even technical-grade polymers could be hydrogenated with satisfactory yields under these conditions. A comparison of the system with some known heterogeneous catalysts as well as catalyst poisoning tests supported the homogeneity of the system. These results demonstrate the potential of chemical recycling to regain building blocks for polymers and will be interesting for the further development of polymer hydrogenation.

Catalytic Reductive Alcohol Etherifications with Carbonyl-Based Compounds or CO2 and Related Transformations for the Synthesis of Ether Derivatives

Ether derivatives have myriad applications in several areas of chemical industry and academia. Hence, the development of more effective and sustainable protocols for their production is highly desired. Among the different methodologies reported for ether synthesis, catalytic reductive alcohol etherifications with carbonyl-based moieties (aldehydes/ketones and carboxylic acid derivatives) have emerged in the last years as a potential tool. These processes constitute appealing routes for the selective production of both symmetrical and asymmetrical ethers (including O-heterocycles) with an increased molecular complexity. Likewise, ester-to-ether catalytic reductions and hydrogenative alcohol etherifications with CO2 to dialkoxymethanes and other acetals, albeit in less extent, have undergone important advances, too. In this Review, an update of the recent progresses in the area of catalytic reductive alcohol etherifications using carbonyl-based compounds and CO2 have been described with a special focus on organic synthetic applications and catalyst design. Complementarily, recent progress made in catalytic acetal/ketal-to-ether or ester-to-ether reductions and other related transformations have been also summarized.

Acid-assisted hydrogenation of CO2 to methanol using Ru(II) and Rh(III) RAPTA-type catalysts under mild conditions

A highly efficient homogeneous catalyst system for production of CH3OH from CO2 using single molecular defined ruthenium and rhodium RAPTA-type catalysts [Ru(η6-p-cymene)X2(PTA)] (X = I(1), Cl(2); PTA = 1,3,5-triaza-7-phosphaadamantane) and rhodium catalysts [Rh(η5-C5Me5)X2(PTA/PTA-BH3)] (X = Cl(3), H(4) and PTA-BH3, H(5)) developed in acidic media under mild conditions. A TON of 4752 is achieved using a [Ru(η6-p-cymene)I2(PTA)] catalyst which represents the first example of CO2 hydrogenation to CH3OH using single molecular defined Ru and Rh RAPTA-type catalysts.

Indirect reduction of CO2 and recycling of polymers by manganese-catalyzed transfer hydrogenation of amides, carbamates, urea derivatives, and polyurethanes

The reduction of polar bonds, in particular carbonyl groups, is of fundamental importance in organic chemistry and biology. Herein, we report a manganese pincer complex as a versatile catalyst for the transfer hydrogenation of amides, carbamates, urea derivatives, and even polyurethanes leading to the corresponding alcohols, amines, and methanol as products. Since these compound classes can be prepared using CO2 as a C1 building block the reported reaction represents an approach to the indirect reduction of CO2. Notably, these are the first examples on the reduction of carbamates and urea derivatives as well as on the C-N bond cleavage in amides by transfer hydrogenation. The general applicability of this methodology is highlighted by the successful reduction of 12 urea derivatives, 26 carbamates and 11 amides. The corresponding amines, alcohols and methanol were obtained in good to excellent yields up to 97%. Furthermore, polyurethanes were successfully converted which represents a viable strategy towards a circular economy. Based on control experiments and the observed intermediates a feasible mechanism is proposed.

Manganese-Catalyzed Hydroborations with Broad Scope

Reductive transformations of easily available oxidized matter are at the heart of synthetic manipulation and chemical valorization. The applications of catalytic hydrofunctionalization benefit from the use of liquid reducing agents and operationally facile setups. Metal‐catalyzed hydroborations provide a highly prolific platform for reductive valorizations of stable C=X electrophiles. Here, we report an especially facile, broad‐scope reduction of various functions including carbonyls, carboxylates, pyridines, carbodiimides, and carbonates under very mild conditions with the inexpensive pre‐catalyst Mn(hmds)₂. The reaction could be successfully applied to depolymerizations.

Reduction of Carboxylic Acids to Alcohols via Manganese(I) Catalyzed Hydrosilylation

The reduction of carboxylic acids to the respective alcohols, in mild conditions, was achieved using [MnBr(CO)₅] as the catalyst and bench stable PhSiH₃ as the reducing agent. It was shown that the reaction with the earth-abundant metal catalyst could be performed either with a catalyst loading as low as 0.5 mol %, rare with the use of [MnBr(CO)₅], or on a gram scale employing only 1.5 equiv of PhSiH₃, the lowest amount of silane reported to date for this transformation. Kinetic data and control experiments have provided initial insight into the mechanism of the catalytic process, suggesting that it proceeds via the formation of silyl ester intermediates and ligand dissociation to generate a coordinatively unsaturated Mn(I) complex as the active species.

The key role of the latent N-H group in Milstein's catalyst for ester hydrogenation

We previously demonstrated that Milstein's seminal diethylamino-substituted PNN-pincer-ruthenium catalyst for ester hydrogenation is activated by dehydroalkylation of the pincer ligand, releasing ethane and eventually forming an NHEt-substituted derivative that we proposed is the active catalyst. In this paper, we present a computational and experimental mechanistic study supporting this hypothesis. Our DFT analysis shows that the minimum-energy pathways for hydrogen activation, ester hydrogenolysis, and aldehyde hydrogenation rely on the key involvement of the nascent N-H group. We have isolated and crystallographically characterized two catalytic intermediates, a ruthenium dihydride and a ruthenium hydridoalkoxide, the latter of which is the catalyst resting state. A detailed kinetic study shows that catalytic ester hydrogenation is first-order in ruthenium and hydrogen, shows saturation behavior in ester, and is inhibited by the product alcohol. A global fit of the kinetic data to a simplified model incorporating the hydridoalkoxide and dihydride intermediates and three kinetically relevant transition states showed excellent agreement with the results from DFT.

Valorisation of plastic waste via metal-catalysed depolymerisation

Metal-catalysed depolymerisation of plastics to reusable building blocks, including monomers, oligomers or added-value chemicals, is an attractive tool for the recycling and valorisation of these materials. The present manuscript shortly reviews the most significant contributions that appeared in the field within the period January 2010–January 2020 describing selective depolymerisation methods of plastics. Achievements are broken down according to the plastic material, namely polyolefins, polyesters, polycarbonates and polyamides. The focus is on recent advancements targeting sustainable and environmentally friendly processes. Biocatalytic or unselective processes, acid–base treatments as well as the production of fuels are not discussed, nor are the methods for the further upgrade of the depolymerisation products.

Mechanistic Investigations of Ruthenium Catalyzed Dehydrogenative Thioester Synthesis and Thioester Hydrogenation

We have recently reported the previously unknown synthesis of thioesters by coupling thiols and alcohols (or aldehydes) with liberation of H₂, as well as the reverse hydrogenation of thioesters, catalyzed by a well-defined ruthenium acridine-9H based pincer complex. These reactions are highly selective and are not deactivated by the strongly coordinating thiols. Herein, the mechanism of this reversible transformation is investigated in detail by a combined experimental and computational (DFT) approach. We elucidate the likely pathway of the reactions, and demonstrate experimentally how hydrogen gas pressure governs selectivity toward hydrogenation or dehydrogenation. With respect to the dehydrogenative process, we discuss a competing mechanism for ester formation, which despite being thermodynamically preferable, it is kinetically inhibited due to the relatively high acidity of thiol compared to alcohol and, accordingly, the substantial difference in the relative stabilities of a ruthenium thiolate intermediate as opposed to a ruthenium alkoxide intermediate. Accordingly, various additional reaction pathways were considered and are discussed herein, including the dehydrogenative coupling of alcohol to ester and the Tischenko reaction coupling aldehyde to ester. This study should inform future green, (de)hydrogenative catalysis with thiols and other transformations catalyzed by related ruthenium pincer complexes.

Homogeneous and heterogeneous catalysts for hydrogenation of CO2 to methanol under mild conditions

This review summarizes the concepts, mechanisms, drawbacks and challenges of the state-of-the-art catalysis for CO₂ to MeOH under mild conditions. Thoughtful guidelines and principles for future research are presented and discussed.

Catalytic Hydrogenation of Thioesters, Thiocarbamates, and Thioamides

Direct hydrogenation of thioesters with H₂ provides a facile and waste-free method to access alcohols and thiols. However, no report of this reaction is documented, possibly because of the incompatibility of the generated thiol with typical hydrogenation catalysts. Here, we report an efficient and selective hydrogenation of thioesters. The reaction is catalyzed by an acridine-based ruthenium complex without additives. Various thioesters were fully hydrogenated to the corresponding alcohols and thiols with excellent tolerance for amide, ester, and carboxylic acid groups. Thiocarbamates and thioamides also undergo hydrogenation under similar conditions, substantially extending the application of hydrogenation of organosulfur compounds.

Reaction of H2 with mitochondria-relevant metabolites using a multifunctional molecular catalyst

The Krebs cycle is the fuel/energy source for cellular activity and therefore of paramount importance for oxygen-based life. The cycle occurs in the mitochondrial matrix, where it produces and transfers electrons to generate energy-rich NADH and FADH₂, as well as C₄-, C₅-, and C₆-polycarboxylic acids as energy-poor metabolites. These metabolites are biorenewable resources that represent potential sustainable carbon feedstocks, provided that carbon-hydrogen bonds are restored to these molecules. In the present study, these polycarboxylic acids and other mitochondria-relevant metabolites underwent dehydration (alcohol-to-olefin and/or dehydrative cyclization) and reduction (hydrogenation and hydrogenolysis) to diols or triols upon reaction with H₂, catalyzed by sterically confined iridium-bipyridyl complexes. The investigation of these single-metal site catalysts provides valuable molecular insights into the development of molecular technologies for the reduction and dehydration of highly functionalized carbon resources.

Mild catalytic deoxygenation of amides promoted by thorium metallocene

The organoactinide-catalyzed (Cp*2ThMe2) hydroborated reduction of a wide range of tertiary, secondary, and primary amides to the corresponding amines/amine-borane adducts via deoxygenation of the amides is reported herein. The catalytic reactions proceed under mild conditions with low catalyst loading and pinacolborane (HBpin) concentration in a selective fashion. Cp*2ThMe2 is capable of efficiently catalysing the gram-scale reaction without a drop in efficiency. The amine-borane adducts are successfully converted into free amine products in high conversions, which increases the usefulness of this catalytic system. A plausible mechanism is proposed based on detailed kinetics, stoichiometric, and deuterium labeling studies.

Homogeneous and heterogeneous catalytic reduction of amides and related compounds using molecular hydrogen

Catalytic hydrogenation of amides is of great interest for chemists working in organic synthesis, as the resulting amines are widely featured in natural products, drugs, agrochemicals, dyes, etc. Compared to traditional reduction of amides using (over)stoichiometric reductants, the direct hydrogenation of amides using molecular hydrogen represents a greener approach. Furthermore, amide hydrogenation is a highly versatile transformation, since not only higher amines (obtained by C–O cleavage), but also lower amines and alcohols, or amino alcohols (obtained by C–N cleavage) can be selectively accessed by fine tuning of reaction conditions. This review describes the most recent advances in the area of amide hydrogenation using H₂ exclusively and molecularly defined homogeneous as well as nano-structured heterogeneous catalysts, with a special focus on catalyst development and synthetic applications.

Catalytic hydrogenation of amides is a pivotal chemical transformation for both research labs and chemical production in industry. Here, the authors comprehensively review this topic by including state-of-art homogeneous and heterogeneous catalysts that can hydrogenate amides and related compounds.

Recent Progress with Pincer Transition Metal Catalysts for Sustainability

Our planet urgently needs sustainable solutions to alleviate the anthropogenic global warming and climate change. Homogeneous catalysis has the potential to play a fundamental role in this process, providing novel, efficient, and at the same time eco-friendly routes for both chemicals and energy production. In particular, pincer-type ligation shows promising properties in terms of long-term stability and selectivity, as well as allowing for mild reaction conditions and low catalyst loading. Indeed, pincer complexes have been applied to a plethora of sustainable chemical processes, such as hydrogen release, CO2 capture and conversion, N2 fixation, and biomass valorization for the synthesis of high-value chemicals and fuels. In this work, we show the main advances of the last five years in the use of pincer transition metal complexes in key catalytic processes aiming for a more sustainable chemical and energy production.

A General Regioselective Synthesis of Alcohols by Cobalt-Catalyzed Hydrogenation of Epoxides

A straightforward methodology for the synthesis of anti-Markovnikov-type alcohols is presented. By using a specific cobalt triphos complex in the presence of Zn(OTf)2 as an additive, the hydrogenation of epoxides proceeds with high yields and selectivities. The described protocol shows a broad substrate scope, including multi-substituted internal and terminal epoxides, as well as a good functional-group tolerance. Various natural-product derivatives, including steroids, terpenoids, and sesquiterpenoids, gave access to the corresponding alcohols in moderate-to-excellent yields.