Amphiphilic Layer-by-Layer Assembly Overcoming Solvent Polarity between Aqueous and Nonpolar Media

Interfacial Assembly of 2D Graphene-Derived Ion Channels for Water-Based Green Energy Conversion

The utilization of sustained and green energy is believed to alleviate increasing menace of global environmental concerns and energy dilemma. Interfacial assembly of 2D graphene-derived ion channels (2D-GDICs) with tunable ion/fluid transport behavior enables efficient harvesting of renewable green energy from ubiquitous water, especially for osmotic energy harvesting. In this review, various interfacial assembly strategies for fabricating diverse 2D-GDICs are summarized and their ion transport properties are discussed. This review analyzes how particular structure and charge density/distribution of 2D-GDIC can be modulated to minimize internal resistance of ion/fluid transport and enhance energy conversion efficiency, and highlights stimuli-responsive functions and stability of 2D-GDIC and further examines the possibility of integrating 2D-GDIC with other energy conversion systems. Notably, the presented preparation and applications of 2D-GDIC also inspire and guide other 2D materials to fabricate sophisticated ion channels for targeted applications. Finally, potential challenges in this field is analyzed and a prospect to future developments toward high-performance or large-scale real-word applications is offered.

Layer-by-Layer Materials for the Fabrication of Devices with Electrochemical Applications

The construction of nanostructured materials for their application in electrochemical processes, e.g., energy storage and conversion, or sensing, has undergone a spectacular development over the last decades as a consequence of their unique properties in comparison to those of their bulk counterparts, e.g., large surface area and facilitated charge/mass transport pathways. This has driven strong research on the optimization of nanostructured materials for the fabrication of electrochemical devices, which demands techniques allowing the assembly of hybrid materials with well-controlled structures and properties. The Layer-by-Layer (LbL) method is well suited for fulfilling the requirements associated with the fabrication of devices for electrochemical applications, enabling the fabrication of nanomaterials with tunable properties that can be exploited as candidates for their application in fuel cells, batteries, electrochromic devices, solar cells, and sensors. This review provides an updated discussion of some of the most recent advances on the application of the LbL method for the fabrication of nanomaterials that can be exploited in the design of novel electrochemical devices.

A Layer-by-Layer Assembly Route to Electroplated Fibril-Based 3D Porous Current Collectors for Energy Storage Devices

Electrical conductivity, mechanical flexibility, and large electroactive surface areas are the most important factors in determining the performance of various flexible electrodes in energy storage devices. Herein, a layer-by-layer (LbL) assembly-induced metal electrodeposition approach is introduced to prepare a variety of highly porous 3D-current collectors with high flexibility, metallic conductivity, and large surface area. In this study, a few metal nanoparticle (NP) layers are LbL-assembled onto insulating paper for the preparation of conductive paper. Subsequent Ni electroplating of the metal NP-coated substrates reduces the sheet resistance from ≈10³ to <0.1 Ω sq^-1 while maintaining the porous structure of the pristine paper. Particularly, this approach is completely compatible with commercial electroplating processes, and thus can be directly extended to electroplating applications using a variety of other metals in addition to Ni. After depositing high-energy MnO NPs onto Ni-electroplated papers, the areal capacitance increases from 68 to 811 mF cm^-2 as the mass loading of MnO NPs increases from 0.16 to 4.31 mg cm^-2 . When metal NPs are periodically LbL-assembled with the MnO NPs, the areal capacitance increases to 1710 mF cm^-2 .

Electronic effects of nano-confinement in functional organic and inorganic materials for optoelectronics

This review provides a comprehensive overview of the electronic effects of nano-confinement (from 1D to 3D geometries) on optoelectronic materials and their applications.

Nanoparticle-Based Electrodes with High Charge Transfer Efficiency through Ligand Exchange Layer-by-Layer Assembly

Organic-ligand-based solution processes of metal and transition metal oxide (TMO) nanoparticles (NPs) have been widely studied for the preparation of electrode materials with desired electrical and electrochemical properties for various energy devices. However, the ligands adsorbed on NPs have a significant effect on the intrinsic properties of materials, thus influencing the performance of bulk electrodes assembled by NPs for energy devices. To resolve these critical drawbacks, numerous approaches have focused on developing unique surface chemistry that can exchange bulky ligands with small ligands or remove bulky ligands from NPs after NP deposition. In particular, recent studies have reported that the ligand-exchange-induced layer-by-layer (LE-LbL) assembly of NPs enables controlled assembly of NPs with the desired interparticle distance, and interfaces, dramatically improving the electrical/electrochemical performance of electrodes. This emerging approach also demonstrates that efficient surface ligand engineering can exploit the unique electrochemical properties of individual NPs and maximize the electrochemical performance of the resultant NP-assembled electrodes through improved charge transfer efficiency. This report focuses on how LE-LbL assembly can be effectively applied to NP-based energy storage/conversion electrodes. First, the basic principles of the LE-LbL approach are introduced and then recent progress on NP-based energy electrodes prepared via the LE-LbL approach is reviewed.

Interfacial control and design of conductive nanomaterials for transparent nanocomposite electrodes

A few critical issues in preparing transparent conductive electrodes (TCEs) based on solution-processable conductive nanomaterials are their low electrical conductivity and the unfavorable trade-off between electrical conductivity and optical transparency, which are closely related to the organic ligands bound to the nanomaterial surface. In particular, bulky/insulating organic ligands bound to the surface of conductive nanomaterials unavoidably act as high contact resistance sites at the interfaces between neighboring nanomaterials, which adversely affects the charge transfer kinetics of the resultant TCEs. This article reviews the latest research status of various interfacial control approaches for solution-processable TCEs. We describe how these approaches can be effectively applied to conductive nanomaterials and how interface-controlled conductive nanomaterials can be employed to improve the electrical and/or electrochemical performance of various transparent nanocomposite electrodes, including TCEs, energy storage electrodes, and electrochromic electrodes. Last, we provide perspectives on the development direction for next-generation transparent nanocomposite electrodes and breakthroughs for significantly mitigating the complex trade-off between their electrical/electrochemical performance and optical transparency.

A closer physico-chemical look to the Layer-by-Layer electrostatic self-assembly of polyelectrolyte multilayers

The fabrication of polyelectrolyte multilayer films (PEMs) using the Layer-by-Layer (LbL) method is one of the most versatile approaches for manufacturing functional surfaces. This is the result of the possibility to control the assembly process of the LbL films almost at will, by changing the nature of the assembled materials (building blocks), the assembly conditions (pH, ionic strength, temperature, etc.) or even by changing some other operational parameters which may impact in the structure and physico-chemical properties of the obtained multi-layered films. Therefore, the understanding of the impact of the above mentioned parameters on the assembly process of LbL materials plays a critical role in the potential use of the LbL method for the fabrication of new functional materials with technological interest. This review tries to provide a broad physico-chemical perspective to the study of the fabrication process of PEMs by the LbL method, which allows one to take advantage of the many possibilities offered for this approach on the fabrication of new functional nanomaterials.

Charge-Transfer-Modulated Transparent Supercapacitor Using Multidentate Molecular Linker and Conductive Transparent Nanoparticle Assembly

One of the most critical issues in preparing high-performance transparent supercapacitors (TSCs) is to overcome the trade-off between areal capacitance and optical transmittance as well as that between areal capacitance and rate capability. Herein, we introduce a TSC with high areal capacitance, fast rate capability, and good optical transparency by minimizing the charge transfer resistance between pseudocapacitive nanoparticles (NPs) using molecular linker- and conductive NP-mediated layer-by-layer (LbL) assembly. For this study, bulky ligand-stabilized manganese oxide (MnO) and indium tin oxide (ITO) NP multilayers are LbL-assembled through a ligand exchange reaction between native ligands and small multidentate linkers (tricarballylic acid). The introduced molecular linker substantially decreases the separation distance between neighboring NPs, thereby reducing the contact resistance of electrodes. Moreover, the periodic insertion of ITO NPs into the MnO NP-based electrodes can lower the charge transfer resistance without a meaningful loss of transmittance, which can significantly improve the areal capacitance. The areal capacitances of the ITO NP-free electrode and the ITO NP-incorporated electrode are 24.6 mF cm^-2 (at 61.6% transmittance) and 40.5 mF cm^-2 (at 60.8%), respectively, which outperforms state of the art TSCs. Furthermore, we demonstrate a flexible symmetric solid-state TSC that exhibits scalable areal capacitance and optical transmittance.

High-performance electrochromic films with fast switching times using transparent/conductive nanoparticle-modulated charge transfer

One of the most critical issues in electrochromic (EC) films based on transition metal oxides such as tungsten oxides (WOx) is their poor charge transfer property, which is closely related to EC performance. Herein, high-performance EC films with enhanced charge transport are prepared using small-molecule linkers and transparent/conductive nanoparticles (NPs). In this work, oleylamine (OAm)-stabilized WO2.72 nanorods (NRs) and OAm-stabilized indium tin oxide (ITO) NPs are layer-by-layer (LbL)-assembled with small-molecule linkers (tris(2-aminoethyl)amine, TREN) using a ligand-exchange reaction between bulky/insulating OAm ligands and TREN molecules. In this case, there is only one TREN layer between neighboring inorganic components (WO2.72 NRs and/or ITO NPs), resulting in a dramatic decrease in the separation distance. This minimized separation distance as well as the periodic insertion of transparent/conductive ITO NPs can significantly reduce the charge transfer resistance within WO2.72 NR-based EC films, which remarkably improves their EC performance. Compared to EC films without ITO NPs, the formed EC films with ITO NPs exhibit faster switching responses (4.1 times in coloration time and 3.5 times in bleaching time) and a maximum optical modulation of approximately 55.8%. These results suggest that electrochemical performance, including EC performance, can be significantly improved through structural/interfacial designing of nanocomposites.

Highly Conductive Paper/Textile Electrodes Using Ligand Exchange Reaction-Induced in Situ Metallic Fusion

Here, we report that metal nanoparticle (NP)-based paper/textile electrodes with bulk metallic conductivity can be prepared via organic linker-modulated ligand exchange reaction and in situ room-temperature metallic fusion without additional chemical or thermal treatments. For this study, amine-functionalized molecule linkers instead of bulky polymer linkers were layer-by-layer (LbL)-assembled with tetraoctylammonium bromide (TOABr)-stabilized Au NPs to form Au NP multilayered films. By conversion of the amine groups of the organic molecule linkers from -NH₃⁺ to the -NH₂ groups, as well as by a decrease in the size of the organic linkers, the LbL-assembled Au NPs became highly interconnected and fused during LbL deposition, resulting in Au NP multilayers with adjustable conductivity and transport behavior. These phenomena were also predicted by a density functional theory investigation for the model system. Particularly, LbL-assembled films composed of TOABr-Au NPs and diethylenetriamine ( M_w: ∼104) exhibited a remarkable electrical conductivity of 2.2 × 10⁵ S·cm^-1, which was higher than the electrical conductivity of the metal NP-based electrodes as well as the carbon material-based electrodes reported to date. Furthermore, based on our approach, a variety of insulating flexible papers and textiles were successfully converted into real metal-like paper and textile electrodes with high flexibility preserving their highly porous structure. This approach can provide a basis for further improving and controlling the electrical properties of flexible electrodes through the control of organic linkers.

High-power hybrid biofuel cells using layer-by-layer assembled glucose oxidase-coated metallic cotton fibers

Electrical communication between an enzyme and an electrode is one of the most important factors in determining the performance of biofuel cells. Here, we introduce a glucose oxidase-coated metallic cotton fiber-based hybrid biofuel cell with efficient electrical communication between the anodic enzyme and the conductive support. Gold nanoparticles are layer-by-layer assembled with small organic linkers onto cotton fibers to form metallic cotton fibers with extremely high conductivity (>2.1×104 S cm-1), and are used as an enzyme-free cathode as well as a conductive support for the enzymatic anode. For preparation of the anode, the glucose oxidase is sequentially layer-by-layer-assembled with the same linkers onto the metallic cotton fibers. The resulting biofuel cells exhibit a remarkable power density of 3.7 mW cm-2, significantly outperforming conventional biofuel cells. Our strategy to promote charge transfer through electrodes can provide an important tool to improve the performance of biofuel cells.

Flexible supercapacitor electrodes based on real metal-like cellulose papers

The effective implantation of conductive and charge storage materials into flexible frames has been strongly demanded for the development of flexible supercapacitors. Here, we introduce metallic cellulose paper-based supercapacitor electrodes with excellent energy storage performance by minimizing the contact resistance between neighboring metal and/or metal oxide nanoparticles using an assembly approach, called ligand-mediated layer-by-layer assembly. This approach can convert the insulating paper to the highly porous metallic paper with large surface areas that can function as current collectors and nanoparticle reservoirs for supercapacitor electrodes. Moreover, we demonstrate that the alternating structure design of the metal and pseudocapacitive nanoparticles on the metallic papers can remarkably increase the areal capacitance and rate capability with a notable decrease in the internal resistance. The maximum power and energy density of the metallic paper-based supercapacitors are estimated to be 15.1 mW cm⁻² and 267.3 μWh cm⁻², respectively, substantially outperforming the performance of conventional paper or textile-type supercapacitors.

With ligand-mediated layer-by-layer assembly between metal nanoparticles and small organic molecules, the authors prepare metallic paper electrodes for supercapacitors with high power and energy densities. This approach could be extended to various electrodes for portable/wearable electronics.

Layer-by-layer assembly of versatile nanoarchitectures with diverse dimensionality: a new perspective for rational construction of multilayer assemblies

Over the past few decades, layer-by-layer (LbL) assembly of multilayer thin films has garnered considerable interest on account of its ability to modulate nanometer control over film thickness and its extensive choice of usable materials for coating planar and particulate substrates, thus allowing for the fabrication of responsive and functional thin films for their potential applications in a myriad of fields. Herein, we provide elaborate information on the current developments of LbL assembly techniques including different properties, molecular interactions, and assembly methods associated with this promising bottom-up strategy. In particular, we highlight the principle for rational design and fabrication of a large variety of multilayer thin film systems including multi-dimensional capsules or spatially hierarchical nanostructures based on the LbL assembly technique. Moreover, we discuss how to judiciously choose the building block pairs when exerting the LbL assembly buildup which enables the engineering of multilayer thin films with tailor-made physicochemical properties. Furthermore, versatile applications of the diverse LbL-assembled nanomaterials are itemized and elucidated in light of specific technological fields. Finally, we provide a brief perspective and potential future challenges of the LbL assembly technology. It is anticipated that our current review could provide a wealth of guided information on the LbL assembly technique and furnish firm grounds for rational design of LbL assembled multilayer assemblies toward tangible applications.

Functional nanocomposites with perfect nanoblending between water-soluble polymers and hydrophobic inorganic nanoparticles: applications to electric-stimuli-responsive films

There is rising demand for metal or metal oxide nanoparticle (NP)/polymer nanocomposite films with desired functionalities. However, it is difficult to directly combine well-defined NPs synthesized using organic fatty acids in nonpolar media with water-soluble polymers, except polyelectrolytes with specific functional moieties, because they differ in their hydrophobic/hydrophilic properties. We have developed a facile and universal hydrophilic/hydrophobic layer-by-layer (LbL) assembly method that enables perfect nanoblending between water-soluble polymers and hydrophobic NPs, maintaining their specific functionalities. Various hydrophobic NPs stabilized by using oleic acid (OA) (e.g., OA-TiO₂, OA-Fe₃O₄, OA-Ag, and OA-Pt NPs) were directly LbL assembled with various water-soluble polymers (including biomaterials) containing carboxylic acid (-COOH), tertiary ammonium (N⁺), hydroxyl (-OH), and/or ether (-O-) groups. This adsorption behavior is based on the affinities between water-soluble polymers with multidentate binding sites and the surfaces of metal or metal oxide NPs stabilized by OA ligands. Our approach can be used to fabricate unipolar switching nonvolatile memory devices with ON/OFF current ratios greater than ∼10¹⁰ and good memory stability, despite the use of water-soluble polymers.

Layer-by-layer assembled PMMA-SH/CdSe–Au nanocomposite thin films and the optical limiting property

We demonstrate layer-by-layer assembly of PMMA-SH/CdSe–Au nanocomposite thin films with good transparency, thermal stability and optical liming property, which provide potential uses in laser protective devices.

A colloidoscope of colloid-based porous materials and their uses

Colloids assemble into a variety of bioinspired structures for applications including optics, wetting, sensing, catalysis, and electrodes.

Hydrophobic/Hydrophilic Cooperative Janus System for Enhancement of Fog Collection

Harvesting micro-droplets from fog is a promising method for solving global freshwater crisis. Different types of fog collectors have been extensively reported during the last decade. The improvement of fog collection can be attributed to the immediate transportation of harvested water, the effective regeneration of the fog gathering surface, etc. Through learning from the nature's strategy for water preservation, the hydrophobic/hydrophilic cooperative Janus system that achieved reinforced fog collection ability is reported here. Directional delivery of the surface water, decreased re-evaporation rate of the harvested water, and thinner boundary layer of the collecting surface contribute to the enhancement of collection efficiency. Further designed cylinder Janus collector can facilely achieve a continuous process of efficient collection, directional transportation, and spontaneous preservation of fog water. This Janus fog harvesting system should improve the understanding of micro-droplet collection system and offer ideas to solve water resource crisis.