From Ring-in-Ring to Sphere-in-Sphere: Self-Assembly of Discrete 2D and 3D Architectures with Increasing Stability

Host-Guest Chemistry in Binary and Ternary Complexes Utilizing π-Conjugated Carbon Nanorings

The carbon nanorings, possessing a radial π system, have garnered significant attention primarily due to their size-dependent photophysical properties and the presence of a unique curved π-conjugated cavity. This is evidenced by the rapid proliferation of publications. Furthermore, the integration of building blocks into CPP skeletons can confer [n]CPPs with novel and exceptional photophysical and electronic characteristics, as well as chiral properties and host-guest interactions, thereby augmenting the diversity of [n]CPPs. Notably, the curved π surface structures and concave cavity of carbon nanorings enable them to host aromatic or non-aromatic guests with a complementarily curved surface, resulting in interesting binary or ternary complexes. This review provides a comprehensive treatment of literature reports on binary and ternary complexes, focusing on both their host-guest interactions and properties. It is important to note that the scope of this review is limited to host-guest chemistry in binary and ternary complexes based on π-conjugated carbon nanorings.

Synthesis of a Triangle-Fused Six-Pointed Star and Its Electrocatalytic CO2 Reduction Activity

As electrocatalysts, molecular catalysts with large aromatic systems (such as terpyridine, porphyrin, or phthalocyanine) have been widely applied in the CO2 reduction reaction (CO2RR). However, these monomeric catalysts tend to aggregate due to strong π-π interactions, resulting in limited accessibility of the active site. In light of these challenges, we present a novel strategy of active site isolation for enhancing the CO2RR. Six Ru(Tpy)2 were integrated into the skeleton of a metallo-organic supramolecule by stepwise self-assembly in order to form a rhombus-fused six-pointed star R1 with active site isolation. The turnover frequency (TOF) of R1 was as high as 10.73 s-1 at -0.6 V versus reversible hydrogen electrode (vs RHE), which is the best reported value so far at the same potential to our knowledge. Furthermore, by increasing the connector density on R1's skeleton, a more stable triangle-fused six-pointed star T1 was successfully synthesized. T1 exhibits exceptional stability up to 126 h at -0.4 V vs RHE and excellent TOF values of CO. The strategy of active site isolation and connector density increment significantly enhanced the catalytic activity by increasing the exposure of the active site. This work provides a starting point for the design of molecular catalysts and facilitates the development of a new generation of catalysts with a high catalytic performance.

Monitoring Hierarchical Assembly of Ring-in-Ring and Russian Doll Complexes Based on Carbon Nanoring by Förster Resonance Energy Transfer

We presented the construction of the ring-in-ring and Russian doll complexes on the basis of triptycene-derived carbon nanoring (TP-[12]CPP), which not only acts as a host for pillar[5]arene (P5A) but also serves as an energy donor for building Förster resonance energy transfer (FRET) systems. We also demonstrated that their hierarchical assembly processes could be efficiently monitored in real time using FRET. NMR, UV-vis and fluorescence, and mass spectroscopy analyses confirmed the successful encapsulation of the guests P5A/P5A-An by TP-[12]CPP, facilitated by C-H···π and ···π interactions, resulting in the formation of a distinct ring-in-ring complex with a binding constant of Ka = 2.23 × 104 M-1. The encapsulated P5A/P5A-An can further reverse its role to be a host for binding energy acceptors to form Russian doll complexes, as evidenced by the occurrence of FRET and mass spectroscopy analyses. The apparent binding constant of the Russian doll complexes was up to 3.6 × 104 M-1, thereby suggesting an enhanced synergistic effect. Importantly, the Russian doll complexes exhibited both intriguing one-step and sequential FRET dependent on the subcomponent P5A/P5A-An during hierarchical assembly, reminiscent of the structure and energy transfer of the light-harvesting system presented in purple bacteria.

Adjusting the Architecture of Heptagonal Metallo-Macrocycles by Embedding Metal Nodes into the Backbone

Coordination-driven self-assembly has been extensively employed for the bottom-up construction of discrete metallo-macrocycles. However, the prevalent use of benzene rings as the backbone limits the formation of large metallo-macrocycles with more than six edges. Herein, by embedding metal nodes into the ligand backbone, we successfully regulated the ligand arm angle and assembled two giant heptagonal metallo-macrocycles with precise control. The angle between two arms at position 4 of the central terpyridine (tpy) extended after complexation with metal ions, leading to ring expansion of the metallo-macrocycle. The assembled structures were straightforwardly identified through multi-dimensional NMR spectroscopy (1 H, COSY, NOESY), multidimensional mass spectrometry analysis (ESI-MS and TWIM-MS), transmission electron microscopy (TEM), as well as scanning tunneling microscopy (STM). In addition, the catalytic performances of metallo-macrocycles in the oxidation of thioanisole were studied, with both supramolecules exhibiting good conversion rates. Furthermore, fiber-like nanostructures were observed from single-molecule heptagons by hierarchical self-assembly.

Supramolecular Shish Kebabs: Higher Order Dimeric Structures from Ring-in-Rings Complexes with Conformational Adaptivity

Use of abiotic chemical systems for understanding higher order superstructures is challenging. Here we report a ring-in-ring(s) system comprising a hydrogen-bonded macrocycle and cyclobis(paraquat-o-phenylene) tetracation (o-Box) or cyclobis(paraquat-p-phenylene) tetracation (CBPQT⁴⁺ , p-Box) that assembles to construct discrete higher order structures with adaptive conformation. As indicated by mass spectrometry, computational modeling, NMR spectroscopy, and single-crystal X-ray diffraction analysis, this ring-in-ring(s) system features the box-directed aggregation of multiple macrocycles, leading to generation of several stable species such as H4G (1 a/o-Box) and H5G (1 a/o-Box). Remarkably, a dimeric shish-kebab-like ring-in-rings superstructure H7G2 (1 a/o-Box) or H8G2 (1 a/p-Box) is formed from the coaxial stacking of two ring-in-rings units. The formation of such unique dimeric superstructures is attributed to the large π-surface of this 2D planar macrocycle and the conformational variation of both host and guest.

Metal Organic Polygons and Polyhedra: Instabilities and Remedies

The field of coordination chemistry has undergone rapid transformation from preparation of monometallic complexes to multimetallic complexes. So far numerous multimetallic coordination complexes have been synthesized. Multimetallic coordination complexes with well-defined architectures are often called as metal organic polygons and polyhedra (MOPs). In recent past, MOPs have received tremendous attention due to their potential applicability in various emerging fields. However, the field of coordination chemistry of MOPs often suffer set back due to the instability of coordination complexes particularly in aqueous environment-mostly by aqueous solvent and atmospheric moisture. Accordingly, the fate of the field does not rely only on the water solubilities of newly synthesized MOPs but very much dependent on their stabilities both in solution and solid state. The present review discusses several methodologies to prepare MOPs and investigates their stabilities under various circumstances. Considering the potential applicability of MOPs in sustainable way, several methodologies (remedies) to enhance the stabilities of MOPs are discussed here.

Multi-Decker Emissive Supramolecular Architectures Based on Shape-Complementary Ligands Pair

Dye aggregates have attracted a great deal of attention due to their widespread applications in organic light-emitting devices, light-harvesting systems, etc. However, the strategies to precisely control chromophores with specific spatial arrangements still remain a great challenge. In this work, a series of double- and triple-decker supramolecular complexes are successfully constructed by coordination-driven self-assembly of carefully designed shape-complementary ligands, one claw-like tetraphenylethylene (TPE)-based host ligand and three tetratopic or ditopic guest ligands. The spatial configurations of these assemblies (one double-decker and three "S-shaped" or "X-shaped" triple-decker structures) depend on the angles of these TPE-derived ligands. Notably, the three triple-decker structures are geometric isomers. Furthermore, photophysical studies show that these complexes exhibit different ratios of radiative (k_r ) and non-radiative (k_nr ) rate constant due to the different spatial arrangements of TPE moieties. This study provides not only a unique strategy for the construction of multi-stacks with specific spatial arrangement, but also a promising platform for investigating the aggregation behavior of fluorescent chromophores.

Beyond Platonic: How to Build Metal-Organic Polyhedra Capable of Binding Low-Symmetry, Information-Rich Molecular Cargoes

The field of metallosupramolecular chemistry has advanced rapidly in recent years. Much work in this area has focused on the formation of hollow self-assembled metal-organic architectures and exploration of the applications of their confined nanospaces. These discrete, soluble structures incorporate metal ions as 'glue' to link organic ligands together into polyhedra.Most of the architectures employed thus far have been highly symmetrical, as these have been the easiest to prepare. Such high-symmetry structures contain pseudospherical cavities, and so typically bind roughly spherical guests. Biomolecules and high-value synthetic compounds are rarely isotropic, highly-symmetrical species. To bind, sense, separate, and transform such substrates, new, lower-symmetry, metal-organic cages are needed. Herein we summarize recent approaches, which taken together form the first draft of a handbook for the design of higher-complexity, lower-symmetry, self-assembled metal-organic architectures.

Discrete Platinum(II) Metallacycles with Inner- and Outer-Modified 9,10-Distyrylanthracene: Design, Self-Assembly, and Luminescence Properties

To completely unravel the relationship between structures and luminescence properties of inner- and outer-modified metallacycles, two rhombic metallacycles S1 and S2 with 9,10-distyrylanthracene (DSA) were constructed herein via the design of DSA moieties on the inside or outside of metallacycles. Similar building blocks of the two metallacycles led to the same emission wavelengths in a dilute solution. In contrast, their fluorescence emissions in the aggregation and solid states were significantly different and revealed interesting emission behaviors from structures with inner- and outer-modified design. Finally, based on their luminescence properties, a tunable solid-state fluorescence emissive material was easily obtained by the mixing of two supramolecules in different ratios. This unique design suggested that the modified position of fluorophores exerts a key impact on the adjustment of luminescence from a dilute solution to the aggregated state and will be of great significance for the development of luminescent materials based on supramolecules.

Terpyridine-Based 3D Discrete Metallosupramolecular Architectures

Terpyridine (tpy)-based 3D discrete metallosupramolecular architectures, which are often inspired by polyhedral geometry and the biological structures found in nature, have drawn significant attention from the community of metallosupramolecular chemistry. Because of the linear tpy-M(II)-tpy connectivity, the creation of sophisticated 3D metallosupramolecules based on tpy remains a formidable synthetic challenge. Nevertheless, with recent advancement in ligand design and self-assembly, diverse 3D metallosupramolecular polyhedrons, such as Platonic solids, Archimedean solids, prims as well as Johnson solids, have been constructed and their potential applications have been explored. This review summarizes the progress on tpy-based discrete 3D metallosupramolecules, aiming to shed more light on the design and construction of novel discrete architectures with molecular-level precision through coordination-driven self-assembly.

Ultramacrocyclization in water via external templation

Condensing a dihydrazide and each of a series of cationic bisaldehyde compounds bearing polymethylene chains in weakly acidic water produces either a macrocycle in a [1 + 1] manner or its dimer namely a [2]catenane, or their mixture. The product distribution is determined by the length of the bisaldehydes. Addition of cucurbit[8]uril (CB[8]) drives the catenane/macrocycle equilibria to the side of macrocycles, by forming ring-in-ring complexes with the latter. When the polymethylene unit of the bisaldehyde is replaced with a more rigid p-xylene linker, its self-assembly with the dihydrazide leads to quantitative formation of a [2]catenane. Upon addition of CB[8], the [2]catenane is transformed into an ultra-large macrocycle condensed in a [2 + 2] manner, which is encircled by two CB[8] rings. The framework of this macrocycle contains one hundred and two atoms, whose synthesis would be a formidable task without the external template CB[8]. Removal of CB[8] with a competitive guest leads to recovery of the [2]catenane.

Self-Assembly of Octanuclear PtII/PdII Coordination Barrels and Uncommon Structural Isomerization of a Photochromic Guest in Molecular Space

Two tetragonal molecular barrels TB1 and TB2 were successfully synthesized by coordination-driven self-assembly of a tetrapyridyl donor (L) of the thiazolo[5,4-d]thiazole backbone with cis-blocked 90° Pd(II) and Pt(II) acceptors, respectively. The single-crystal structure analysis of TB1 revealed the formation of a two-face opened tetragonal Pd8 molecular barrel architecture. In contrast, the isostructural Pt(II) barrel (TB2) is water-soluble. The large confined hydrophobic molecular cavity including wide open windows and good water solubility of the barrel TB2 made it a potential molecular container for the encapsulation of guests with different sizes and properties. This has been exploited to encapsulate and stabilize the open form of a photochromic molecule (G2) in water, while the same photochromic molecule exists exclusively in a cyclic zwitterionic form in aqueous medium in the absence of the barrel TB2. This cyclic form is very stable in water and does not go back to its parent open form under common external stimuli. Surprisingly, reverse switching of the cyclic form to a colored hydrophobic open form was also possible instantly in water upon addition of the solid barrel TB2 into an aqueous solution of G2. Such a fast reverse isomerization of an irreversible process in aqueous medium by utilizing host-guest interaction of the barrel TB2 and the guest G2 is interesting. The barrel TB2 was also capable of encapsulating the water-insoluble radical initiator G1 in aqueous medium.

A cucurbituril-pillararene ring-on-ring complex

A new type of non-intertwined ring-on-ring assembly was formed by the portal binding between a perfunctionalized polycationic pillar[5]arene and a cucurbit[10]uril, demonstrating a facile approach to solubilize a large macrocycle in water. Different binding behaviors towards guests were observed for the high-order complex, enriching the functional supramolecular systems.

Self-assembled metallasupramolecular cages towards light harvesting systems for oxidative cyclization

Designing artificial light harvesting systems with the ability to utilize the output energy for fruitful application in aqueous medium is an intriguing topic for the development of clean and sustainable energy. We report here facile synthesis of three prismatic molecular cages as imminent supramolecular optoelectronic materials via two-component coordination-driven self-assembly of a new tetra-imidazole donor (L) in combination with 180°/120° di-platinum(ii) acceptors. Self-assembly of 180° trans-Pt(ii) acceptors A1 and A2 with L leads to the formation of cages Pt4 L 2(1a) and Pt8 L 2(2a) respectively, while 120°-Pt(ii) acceptor A3 with L gives the Pt8 L 2(3a) metallacage. PF6 - analogues (1b, 2b and 3b) of the metallacages possess a high molar extinction coefficient and large Stokes shift. 1b-3b are weakly emissive in dilute solution but showed aggregation induced emission (AIE) in a water/MeCN mixture as well as in the solid state. AIE active 2b and 3b in aqueous (90% water/MeCN mixture) medium act as donors for fabricating artificial light harvesting systems via Förster resonance energy transfer (FRET) with organic dye rhodamine-B (RhB) with high energy efficiency and good antenna effect. The metallacages 2b and 3b represent an interesting platform to fabricate new generation supramolecular aqueous light harvesting systems with high antenna effect. Finally, the harvested energy of the LHSs (2b + RhB) and (3b + RhB) was utilized successfully for efficient visible light induced photo-oxidative cross coupling cyclization of N,N-dimethylaniline (4) with a series of N-alkyl/aryl maleimides (5) in aqueous acetonitrile with dramatic enhancement in yields compared to the reactions with RhB or cages alone.

Russian-Doll-Like Molecular Cubes

Nanosized cage-within-cage compounds represent a synergistic molecular self-assembling form of three-dimensional architecture that has received particular research focus. Building multilayered ultralarge cages to simulate complicated virus capsids is believed to be a tough synthetic challenge. Here, we synthesize two large double-shell supramolecular cages by facile self-assembly of presynthesized metal-organic hexatopic terpyridine ligands with metal ions. Differing from the mixture of prisms formed from the inner tritopic ligand, the redesigned metal-organic hexatopic ligands bearing high geometric constraints that led to the exclusive formation of discrete double-shell structures. These two unique nested cages are composed of inner cubes (5.1 nm) and outer huge truncated cubes (12.0 and 13.2 nm) with six large bowl-shape subcages distributed on six faces. The results with molecular weights of 75 232 and 77 667 Da were among the largest synthetic cage-in-cage supramolecules reported to date. The composition, size and shape were unambiguously characterized by a combination of ¹H NMR, DOSY, ESI-MS, TWIM-MS, TEM, AFM, and SAXS. This work provides an interesting model for functional recognition, delivery, and detection of various guest molecules in the field of supramolecular materials.

Self-Assembly of Metallo-Supramolecules with Dissymmetrical Ligands and Characterization by Scanning Tunneling Microscopy

Asymmetrical and dissymmetrical structures are widespread and play a critical role in nature and life systems. In the field of metallo-supramolecular assemblies, it is still in its infancy for constructing artificial architectures using dissymmetrical building blocks. Herein, we report the self-assembly of supramolecular systems based on two dissymmetrical double-layered ligands. With the aid of ultra-high-vacuum, low-temperature scanning tunneling microscopy (UHV-LT-STM), we were able to investigate four isomeric structures corresponding to four types of binding modes of ligand LA with two major conformations complexes A. The distribution of isomers measured by STM and total binding energy of each isomer obtained by density functional theory (DFT) calculations suggested that the most abundant isomer could be the most stable one with highest total binding energy. Finally, through shortening the linker between inner and outer layers and the length of arms, the arrangement of dissymmetrical ligand LB could be controlled within one binding mode corresponding to the single conformation for complexes B.

Nanosheets and Hydrogels Formed by 2 nm Metal-Organic Cages with Electrostatic Interaction

We report the mechanism of hydrogel formation in dilute aqueous solutions (>15 mg/mL) by 2 nm metal-organic cages (MOCs). Experiments and all-atom simulations confirm that with the addition of small electrolytes, the MOCs self-assemble into 2D nanosheets via counterion-mediated attraction because of their unique molecular structure and charge distribution as well as σ-π interactions. The stiff nanosheets are difficult to bend into 3-D hollow, spherical blackberry type structures, as observed in many other macroion systems. Instead, they stay in solution and their very large excluded volumes lead to gelation at low (∼1.5 wt %) MOC concentrations, with additional help from hydrophobic and partial π-π interactions similar to the gelation of graphene oxides.

Nucleation of Tiny Silver Nanoparticles by Using a Tetrafacial Organic Molecular Barrel: Potential Use in Visible-Light-Triggered Photocatalysis

Coordination-driven self-assembly of discrete molecular architectures of diverse shapes and sizes has been well studied in the last three decades. Use of dynamic imine bonds for designing analogous metal-free architectures has become a growing challenge recently. This article reports an organic molecular barrel (OB4^R ) as a potential template for nucleation and stabilization of very tiny (<1.5 nm) Ag nanoparticles (AgNPs). Imine bond condensation of a rigid tetra-aldehyde with a flexible diamine followed by imine-bond reduction yielded the discrete tetragonal organic barrel (OB4^R ). The presence of a molecular pocket ornamented with eight diamine moieties gives the potential for encapsulation of silver(I). The organic barrel was finally used as a molecular vessel for the controlled nucleation of silver nanoparticles (AgNPs) with fine size tuning through binding of Ag^I ions in the confined space of the barrel followed by reduction. Transmission electron microscopy (TEM) analysis of the Ag⁰ @OB4^R composite revealed that the mean particle size is 1.44±0.16 nm. The composite material has approximately 52 wt % silver loading. The barrel-supported ultrafine AgNPs [Ag⁰ @OB4^R ] are found to be an efficient photocatalyst for facile Ullmann-type aryl-amination coupling of haloarenes at ambient temperature without using any additives. The catalyst was stable for several cycles of reuse without any agglomeration. The new composite Ag⁰ @OB4^R represents the first example of discrete organic barrel-supported AgNPs employed as a photocatalyst in Ullmann-type coupling reactions at room temperature.

Improving efficiency of measuring individual 1H coupling networks by pure shift 2D J-resolved NMR spectroscopy

The ¹H coupling networks, including ¹H-¹H correlation and J coupling values, provide the important information for structure elucidation and conformation analysis. However, the presence of a large number of couplings and the phase-twist lineshapes often prevents revealing ¹H coupling networks. Here, we provide a clean absorption-mode 2D NMR method, SIMAJ (SImple Methods for 2D Absorption mode J-resolved spectrum), for a straightforward assignment and measurement of the coupling network involving the chosen proton. Relying on the pure shift element, ¹H-¹H couplings and chemical shift evolution are totally separately demonstrating along the F₁ and F₂ dimensions, respectively. Processing with a single experiment dataset and free of 45° spectral shearing, an absorption-mode 2D J-resolved spectrum can be reconstructed. Two pulse sequences were proposed as examples. The SIMAJ signal processing method will be a general procedure for obtaining absorption-mode lineshapes when analyzing the experiment datasets with chemical shifts and J coupling multiplets in the orthogonal dimensions. With excellent sensitivity, high spectral purity, and ability of easily identifying ¹H-¹H correlations, significant improvements are beneficial for structural, conformational, or complex composition analyses.

Regulating the reactivity of black phosphorus via protective chemistry

Rationally regulating the reactivity of molecules or functional groups is common in organic chemistry, both in laboratory and industry synthesis. This concept can be applied to inorganic nanomaterials, particularly two-dimensional black phosphorus (BP) nanosheets. The high reactivity of few-layer (even monolayer) BP is expected to be "shut down" when not required and to be resumed upon application. Here, we demonstrate a protective chemistry-based methodology for regulating BP reactivity. The protective step initiates from binding Al³⁺ with lone pair electrons from P to decrease the electron density on the BP surface, and ends with an oxygen/water-resistant layer through the self-assembly of hydrophobic 1,2-benzenedithiol (BDT) on BP/Al³⁺ This protective step yields a stabilized BP with low reactivity. Deprotection of the obtained BP/Al³⁺/BDT is achieved by chelator treatment, which removes Al³⁺ and BDT from the BP surface. The deprotective process recovers the electron density of BP and thus restores the reactivity of BP.

Over one century after discovery: pyrylium salt chemistry emerging as a powerful approach for the construction of complex macrocycles and metallo-supramolecules

Over one century after its discovery, pyrylium salt chemistry has been extensively applied in preparing light emitters, photocatalysts, and sensitizers. In most of these studies, pyrylium salts acted as versatile precursors for the preparation of small molecules (such as furan, pyridines, phosphines, pyridinium salts, thiopyryliums and betaine dyes) and poly(pyridinium salt)s. In recent decades, pyrylium salt chemistry has emerged as a powerful approach for constructing complex macrocycles and metallo-supramolecules. In this perspective, we attempt to summarize the representative efforts of synthesizing and self-assembling large, complex architectures using pyrylium salt chemistry. We believe that this perspective not only highlights the recent achievements in pyrylium salt chemistry, but also inspires us to revisit this chemistry to design and construct macrocycles and metallo-supramolecules with increasing complexity and desired function.

Ring-in-Ring(s) Complexes Exhibiting Tunable Multicolor Photoluminescence

One ring threaded by two other rings to form a non-intertwined ternary ring-in-rings motif is a challenging task in noncovalent synthesis. Constructing multicolor photoluminescence systems with tunable properties is also a fundamental research goal, which can lead to applications in multidimensional biological imaging, visual displays, and encryption materials. Herein, we describe the design and synthesis of binary and ternary ring-in-ring(s) complexes, based on an extended tetracationic cyclophane and cucurbit[8]uril. The formation of these complexes is accompanied by tunable multicolor fluorescence outputs. On mixing equimolar amounts of the cyclophane and cucurbit[8]uril, a 1:1 ring-in-ring complex is formed as a result of hydrophobic interactions associated with a favorable change in entropy. With the addition of another equivalent of cucurbit[8]uril, a 1:2 ring-in-rings complex is formed, facilitated by additional ion-dipole interactions involving the pyridinium units in the cyclophane and the carbonyl groups in cucurbit[8]uril. Because of the narrowing in the energy gaps of the cyclophane within the rigid hydrophobic cavities of cucurbit[8]urils, the binary and ternary ring-in-ring(s) complexes emit green and bright yellow fluorescence, respectively. A series of color-tunable emissions, such as sky blue, cyan, green, and yellow with increased fluorescence lifetimes, can be achieved by simply adding cucurbit[8]uril to an aqueous solution of the cyclophane. Notably, the smaller cyclobis(paraquat-p-phenylene), which contains the same p-xylylene linkers as the extended tetracationic cyclophane, does not form ring-in-ring(s) complexes with cucurbit[8]uril. The encapsulation of this extended tetracationic cyclophane by both one and two cucurbit[8]urils provides an incentive to design and synthesize more advanced supramolecular systems, as well as opening up a feasible approach toward achieving tunable multicolor photoluminescence with single chromophores.

Equi-size nesting of Platonic and Archimedean metal-organic polyhedra into a twin capsid

Inspired by the structures of virus capsids, chemists have long pursued the synthesis of their artificial molecular counterparts through self–assembly. Building nanoscale hierarchical structures to simulate double-shell virus capsids is believed to be a daunting challenge in supramolecular chemistry. Here, we report a double-shell cage wherein two independent metal–organic polyhedra featuring Platonic and Archimedean solids are nested together. The inner (3.2 nm) and outer (3.3 nm) shells do not follow the traditional “small vs. large” pattern, but are basically of the same size. Furthermore, the assembly of the inner and outer shells is based on supramolecular recognition, a behavior analogous to the assembly principle found in double-shell viruses. These two unique nested characteristics provide a new model for Matryoshka–type assemblies. The inner cage can be isolated individually and proves to be a potential molecular receptor to selectively trap guest molecules.

Supramolecular constructs that mimic complex biological assemblies are synthetically challenging. Here, the authors present a double-shell cage wherein two independent metal-organic polyhedra are nested together in a manner analogous to that found in double-shell virus capsids.

Reinforced Topological Nanoassemblies: 2D Hexagon-Fused Wheel to 3D Prismatic Metallo-Lamellar Structure with Molecular Weight of 119 K Daltons

By a precise metallo-ligand design, the advanced coordination-driven self-assembly could succeed in the preparation of giant molecular weight of the metallo-architectures. However, the synthesis of a single discrete high-molecular-weight (>100 K Da) structure has not been demonstrated due to the insurmountable synthetic challenge. Herein, we present a two-dimensional wheel structure (W1) and a gigantic three-dimensional dodecagonal prism-like architecture (P1), which were generated by multicomponent self-assembly of two similar metallo-organic ligands and a core ligand with metal ions, respectively. The giant 2D-suprastructure W1 with six hexagonal metallacycles that fused to the central spoke wheel was first achieved in nearly quantitative yield, and then, directed by introducing a meta-substituted coordination site into the key ligand, the supercharged (36 Ru²⁺ and 48 Cd²⁺ ions) double-decker prismatic structure P1 with two wheel structure W1s serve as the surfaces and 12 <Tpy-Cd²⁺-Tpy> connectivities serve as the edges, where a molecular weight up to 119 498.18 Da was accomplished. The expected molecular composition and size morphology was unequivocally characterized by nuclear magnetic resonance, mass spectrometry, and transmission electron microscopy investigations. The introduction of a wheel structure is able to add considerable stability and complexity to the final architecture. These well-defined scaffolds are expected to play an important role in the functional materials field, such as molecular encapsulation and medicine sustained release.

From Dimeric to Octameric Metallo-Supramolecular Macrocycles Based on Sterically Congested Ligand-assisted Self-Assembly with Zn(II), Cd(II), and Fe(II)

Two sterically congested 2,2':6',2″-terpyridine-based ligands LA and LB, composed of asymmetrically contiguous terpyridine units, are designed and synthesized for metallo-supramolecular architectures. The significant advantage of this design is that the terpyridines in these ligands have different chemical environments and show a selective coordination ability with each other. For ditopic ligand LA, the self-assembly with Zn(II), Cd(II), and Fe(II) gave the rhombic dimers, which have the same sets of terpyridine signals as ligand LA. The self-assembly behavior of tritopic ligand LB with Cd(II) and Zn(II) are observed for discrete tetramers under thermodynamic control, whereas ligand LB and Fe(II) are assembled to generate a mixture of tetramer, hexamer, and octamer, which are successfully isolated using regular chromatographic separation. Moreover, the sterically congested ligands and metal ions formed stable intermediates to drive the formation of discrete structures, which is also proved by mixing LB and Cd(II) with a precise stoichiometric ratio of 1:1. These supramolecular complexes are thoroughly characterized by NMR spectroscopy, electrospray ionization-mass spectrometry, and 2D traveling-wave ion mobility-mass spectrometry. This conceptually new design of sterically congested ligands provides a novel strategy for precisely controlled supramolecular complexes with diverse architectures.

Dandelion flower-like micelles

Dandelion flower-like micelles (DFMs) were prepared by self-assembly of polycaprolactone (PCL) functionalized surface cross-linked micelles (SCMs). Upon reductive stimuli, the SCMs can be released from the DFMs by non-Brownian motion at an average speed of 19.09 μm s-1. Similar to the property of dandelion flowers dispersing their seeds over a long distance, the DFMs demonstrated enhanced multicellular tumor spheroid (MTS) penetration, a useful property in the treatment of many diseases including cancer, infection-of-biofilm diseases and ocular problems.

Metal-Organic Pt(II) Hexagonal-Prism Macrocycles and Their Photophysical Properties

In this work, we present the formation of two open-ended hexagonal-prism tubular macrocycles by the [6 + 12] self-assembly of the symmetric ∼120° organic ligand donor with ∼90° Pt(II) acceptor in a 1:2 ratio. The assembled structures were characterized by multinuclear NMR (1H NMR, 31P{1H} NMR, and 1H-1H COSY NMR), electrospray ionization mass spectrometry (ESI-TOF-MS), traveling wave ion mobility-mass spectrometry (TWIM-MS), and transmission electron microscopy. Molecular modeling was further conducted to get insight into their structured characteristics. We also examined their photophysical properties.

Radical-Induced Hierarchical Self-Assembly Involving Supramolecular Coordination Complexes in Both Solution and Solid States

To explore a new supramolecular interaction as the main driving force to induce hierarchical self-assembly (HSA) is of great importance in supramolecular chemistry. Herein, we present a radical-induced HSA process through the construction of well-defined rhomboidal metallacycles containing triphenylamine (TPA) moieties. The light-induced radical generation of the TPA-based metallacycle has been demonstrated, which was found to subsequently drive hierarchical self-assembly of metallacycles in both solution and solid states. The morphologies of nanovesicle structures and nanospheres resulting from hierarchical self-assembly have been well-illustrated by using TEM and high-angle annular dark-field STEM (HAADF-STEM) micrographs. The mechanism of HSA is supposed to be associated with the TPA radical interaction and metallacycle stacking interaction, which has been supported by the coarse-grained molecular dynamics simulations. This study provides important information to understand the fundamental TPA radical interaction, which thus injects new energy into the hierarchical self-assembly of supramolecular coordination complexes (SCCs). More interestingly, the stability of TPA radical cations was significantly increased in these metallacycles during the hierarchical self-assembly process, thereby opening a new way to develop stable organic radical cations in the future.

One-Pot Self-Assembly of Stellated Metallosupramolecules from Multivalent and Complementary Terpyridine-Based Ligands

A series of stellated metallosupramolecular architectures have been assembled through three-component integrative self-sorting. Building on the complementary ligand pairing, the initial attempts to synthesize the hexagram complex from a combination of X-shaped tetrakis- and V-shaped bis-terpyridine ligands, and Cd^II ions, resulted in an unprecedented mixture of stellated octanuclear and dodecanuclear metallocages, which were further isolated by column chromatography. To overcome the unexpected obstacle, the multivalent ligand design along with spontaneous heteroleptic complexation was applied to realization of the one-pot synthesis of the intricate topology. A centrally situated triangle served as a prop for quantitative formation of the six-pointed stellated complex. Notably, in the absence of the triangular prop, a four-pointed star was produced.

Self-assembly of emissive metallocycles with tetraphenylethylene, BODIPY and terpyridine in one system

Tetraphenylethylene (TPE) related (supra)molecules have been intensively investigated due to their aggregation-induced emission (AIE) effect based on the restriction of intramolecular rotation (RIR). Meanwhile, boron-dipyrromethene (BODIPY) tends to emit intense fluorescence with high quantum yields. Herein, we combined TPE, BODIPY and terpyridine (TPY) into one system to study the emissive behaviour of organic building block as well as a self-assembled metallo-supramolecule. The TPY and BODIPY substituents with bulky sizes provide strong hindrance to restrict the rotation of the phenyl groups on TPE, leading to enhancement of emissive properties in both solution and aggregation states. Furthermore, the BODIPY-TPE-TPY ligand (L) was assembled with Zn (II) through coordination-driven self-assembly to form a cyclic dimer (D) with typical AIE characteristics.