De Novo Design of Strand-Swapped β-Hairpin Hydrogels

Effect of protease hydrolysis on the structure of acidic heating-induced soy protein amyloid fibrils

The effectiveness of using amyloid fibrillation to improve the functional qualities of soy protein had drawn growing attention. However, the relationship between protein subunits and the structural polymorphism of soy protein-derived amyloid fibrils (SAFs) was not yet completely understood. In this study, soy protein subunits were hydrolyzed to different degrees according to the different action sites of different proteases (Pepsin, Papain and Alcalase). The impact of subunits on the amyloid fibrillation of soy protein was investigated through various techniques including atomic force microscopy, thioflavin T fluorescence, 1-anililo-naphthalene-8-sulfonate, and Fourier transform infrared spectrometer. The findings showed that the α and α' subunits were associated with the formation of fibril branch chains. The degree of hydrolysis of β subunits was found to be proportional to the number of fibrils. The presence of the 11S component was identified as a necessary condition for the formation of long-rigid fibrils. Furthermore, enzymatic hydrolysis unfolded the protein structure, exposing hydrophobic groups, loosening the protein structure, and altering the proportion of parallel and antiparallel β-sheet structures. This promoted the formation of amyloid fibrils and accelerated the development of stable SAFs gel. This study advances the knowledge of the function of subunits in amyloid fibrillation.

Kinetically Controlled Polyelectrolyte Complex Assembly of microRNA-Peptide Nanoparticles toward Treating Mesothelioma

Broad size distributions and poor long-term colloidal stability of microRNA-carrying nanoparticles, especially those formed by polyelectrolyte complexation, represent major hurdles in realizing their clinical translation. Herein, peptide design is used alongside optimized flash nanocomplexation (FNC) to produce uniform peptide-based miRNA particles of exceptional stability that display anticancer activity against mesothelioma in vitro and in vivo. Modulating the content and display of lysine-based charge from small intrinsically disordered peptides used to complex miRNA proves essential in achieving stable colloids. FNC facilitates kinetic isolation of the mechanistic steps involved in particle formation to allow the preparation of particles of discrete size in a highly reproducible, scalable, and continuous manner, facilitating pre-clinical studies. To the best of the authors knowledge, this work represents the first example of employing FNC to prepare polyelectrolyte complexes of miRNA and peptide. Encapsulation of these particles into an injectable hydrogel matrix allows for their localized in vivo delivery by syringe. A one-time injection of a gel containing particles composed of miRNA-215-5p and the peptide PKM1 limits tumor progression in a xenograft model of mesothelioma.

Dissecting the Conformational Stability of a Glycan Hairpin

Systematic structural studies of model oligopeptides revealed important aspects of protein folding and offered design principles to access non-natural materials. In the same way, the rules that regulate glycan folding could be established by studying synthetic oligosaccharide models. However, their analysis is often limited due to the synthetic and analytical complexity. By utilizing a glycan capable of spontaneously folding into a hairpin conformation as a model system, we investigated the factors that contribute to its conformational stability in aqueous solution. The modular design of the hairpin model featured a trisaccharide turn unit and two β-1,4-oligoglucoside stacking strands that allowed for systematic chemical modifications of the glycan sequence, including the introduction of NMR labels and staples. Nuclear magnetic resonance assisted by molecular dynamics simulations revealed that stereoelectronic effects and multiple glycan-glycan interactions are the major determinants of folding stabilization. Chemical modifications in the glycan primary sequence (e.g., strand elongation) can be employed to fine-tune the rigidity of structural motifs distant from the modification sites. These results could inspire the design of other glycan architectures, with implications in glycobiology and material sciences.

A General Group-Protection Synthesis Strategy to Fabricate Covalent Organic Framework Gels

Fabricating insoluble and infusible porous materials into gels for advanced applications is of great importance but has formidable challenges. Here, we present a general, facile, and scalable protocol to fabricate covalent organic framework (COF) gels using a group-protection synthesis strategy. To prove the generality of this strategy, we successfully prepared 10 types of COF organohydrogels with high crystallinity, porosity, good mechanical properties, and excellent solvent and freezing resistance. Notably, these COF organohydrogels can easily transform into hydrogels, organogels, and aerogels, breaking the gaps between different types of COF gels. An in-depth mechanism investigation unveils that the group-protection strategy effectively slows down the formation rate and regulates the morphology of COFs, benefiting the formation of cross-linked nanofibers/nanosheets to produce COF gels. We also find that the hydrogen bond network formed by the organic/water binary solvent and functional groups in the COF skeletons plays a vital role in creating organohydrogels and maintaining frost resistance and solvent resistance. As an application demonstration, COF gels installed with photoresponsive azobenzene groups show excellent solar energy absorption, photothermal conversion, and water transmission performances, demonstrating great potential in solar desalination. This work enriches the synthesis toolboxes for COF gels and expands the application scope of COFs.

3D Hydrogel Cultures for High-Throughput Drug Discovery

Our increased understanding of how a cell's microenvironment influences its behavior has fueled an interest in three-dimensional (3D) cell cultures for drug discovery. Particularly, scaffold-based 3D cultures are expected to recapitulate in vivo tissue stiffness and extracellular matrix composition more accurately than standard two-dimensional (2D) monolayer cultures. Here we present a 3D hydrogel cell culture setup suitable for automated screening with standard high-throughput screening (HTS) liquid handling equipment commonly found in a drug discovery laboratory. Further, we describe the steps required to validate the assay system for compound screening.

Hydrogels with intrinsic antibacterial activity prepared from naphthyl anthranilamide (NaA) capped peptide mimics

In this study, we prepared antibacterial hydrogels through the self-assembly of naphthyl anthranilamide (NaA) capped amino acid based cationic peptide mimics. These ultra-short cationic peptide mimics were rationally designed with NaA as a capping group, L-phenylalanine, a short aliphatic linker, and a cationic group. The synthesized peptide mimics efficiently formed hydrogels with minimum gel concentrations between 0.1 and 0.3%w/v. The resulting hydrogels exhibited desirable viscoelastic properties which can be tuned by varying the cationic group, electronegative substituent, or counter anion. Importantly, nanofibers from the NaA-capped cationic hydrogels were found to be the source of hydrogels' potent bacteriacidal actvity against both Gram-positive and Gram-negative bacteria while remaining non-cytotoxic. These intrinsically antibacterial hydrogels are ideal candidates for further development in applications where bacterial contamination is problematic.

The Effects of Charged Amino Acid Side-Chain Length on Diagonal Cross-Strand Interactions between Carboxylate- and Ammonium-Containing Residues in a β-Hairpin

The β-sheet is one of the common protein secondary structures, and the aberrant aggregation of β-sheets is implicated in various neurodegenerative diseases. Cross-strand interactions are an important determinant of β-sheet stability. Accordingly, both diagonal and lateral cross-strand interactions have been studied. Surprisingly, diagonal cross-strand ion-pairing interactions have yet to be investigated. Herein, we present a systematic study on the effects of charged amino acid side-chain length on a diagonal ion-pairing interaction between carboxylate- and ammonium-containing residues in a β-hairpin. To this end, 2D-NMR was used to investigate the conformation of the peptides. The fraction folded population and the folding free energy were derived from the chemical shift data. The fraction folded population for these peptides with potential diagonal ion pairs was mostly lower compared to the corresponding peptide with a potential lateral ion pair. The diagonal ion-pairing interaction energy was derived using double mutant cycle analysis. The Asp2-Dab9 (Asp: one methylene; Dab: two methylenes) interaction was the most stabilizing (−0.79 ± 0.14 kcal/mol), most likely representing an optimal balance between the entropic penalty to enable the ion-pairing interaction and the number of side-chain conformations that can accommodate the interaction. These results should be useful for designing β-sheet containing molecular entities for various applications.

Peptide Design and Self-assembly into Targeted Nanostructure and Functional Materials

Peptides have been extensively utilized to construct nanomaterials that display targeted structure through hierarchical assembly. The self-assembly of both rationally designed peptides derived from naturally occurring domains in proteins as well as intuitively or computationally designed peptides that form β-sheets and helical secondary structures have been widely successful in constructing nanoscale morphologies with well-defined 1-d, 2-d, and 3-d architectures. In this review, we discuss these successes of peptide self-assembly, especially in the context of designing hierarchical materials. In particular, we emphasize the differences in the level of peptide design as an indicator of complexity within the targeted self-assembled materials and highlight future avenues for scientific and technological advances in this field.

Ultrashort Peptide Self-Assembly: Front-Runners to Transport Drug and Gene Cargos

The translational therapies to promote interaction between cell and signal come with stringent eligibility criteria. The chemically defined, hierarchically organized, and simpler yet blessed with robust intermolecular association, the peptides, are privileged to make the cut-off for sensing the cell-signal for biologics delivery and tissue engineering. The signature service and insoluble network formation of the peptide self-assemblies as hydrogels have drawn a spell of research activity among the scientists all around the globe in the past decades. The therapeutic peptide market players are anticipating promising growth opportunities due to the ample technological advancements in this field. The presence of the other organic moieties, enzyme substrates and well-established protecting groups like Fmoc and Boc etc., bring the best of both worlds. Since the large sequences of peptides severely limit the purification and their isolation, this article reviews the account of last 5 years' efforts on novel approaches for formulation and development of single molecule amino acids, ultra-short peptide self-assemblies (di- and tri- peptides only) and their derivatives as drug/gene carriers and tissue-engineering systems.

Peptide interdigitation-induced twisted nanoribbons as chiral scaffolds for supramolecular nanozymes

Establishing reliable strategies for rationally manipulating the organization of peptide building blocks and thereby precisely creating chiral nanostructures is challenging, while meaningful toward development of advanced functional materials. Here we report on a peptide-interdigitating mechanism for the reliable self-assembly of lipid-inspired amphiphiles (LIPIAs) into robust twisted nanoribbons by grafting domains to one alkyl tail of lipids as an extended element. Peptide interdigitation promoted the self-assembly of LIPIAs into twisted or flat nanoribbons driven by antiparallel or parallel β-sheet hydrogen bonds, respectively, strongly associated with the connecting direction of the incorporated domains. We found that the LIPIAs containing N-terminus-connected domains with either bulky or small side chain groups formed twisted nanoribbons in a broad pH range, thus implying a sequence- and pH-independent strategy for creation of robust chiral nanostructures. Integrating the resulting twisted nanoribbons with gold nanoparticles led to supramolecular nanozymes exhibiting the excellent catalytic activity and enantioselectivity of asymmetric oxidation of 3,4-dihyroxy-phenylalanine molecules. Our finding demonstrates that the peptide-interdigitating mechanism is a reliable strategy for precise creation of chiral nanostructures serving as chiral matrices for supramolecular nanozymes with improved catalytic performance, thus potentially paving the way towards advanced biomimetic systems resembling natural systems.

Directional molecular sliding movement in peptide hydrogels accelerates cell proliferation

Adjusting the mechanical cues generated in cellular microenvironments is important for manipulating cell behaviour. Here we report on mechanically dynamic hydrogels undergoing directional domain sliding motion and investigate the effect of the well-defined mechanical motion on accelerating cell proliferation. The mechanically dynamic hydrogels were prepared via self-assembly of an amphiphilic peptide consisting of two alternating polar and nonpolar domains cross-linked by disulfide bonds at a nonsymmetrical position. The cross-linked peptide assembled into entangled nanofibers driven by the hydrophobic collapse involving a partial-length sequence due to the covalent constraint. Reduction of the disulfide bonds led to formation of non-equilibrated peptide bilayers, which underwent directional domain sliding motion along each promoted by the thermodynamically favourable transition from the partial to full hydrophobic collapse. The mechanical cues resulting from the directional domain sliding motion within the mechanically dynamic hydrogels accelerated cell proliferation when incubating cells on the hydrogel, compared to the thermodynamically static counterparts, via a mechanotransduction mechanism as supported by the facilitated translocation of yes-associated proteins into the nucleus of the cells. Our finding demonstrates the great potential of mechanically dynamic hydrogels as new-generation biomimetic extracellular matrices in tissue engineering and regeneration.

Dynamic peptide hydrogels undergoing directional domain sliding movement upon release of covalent constraint accelerate cell proliferation through a mechanotransduction pathway.

Self-assembling peptide-based nanodrug delivery systems

Self-assembling peptide-based nanodrug delivery systems (NDDs), consisting of naturally occurring amino acids, not only share the advantages of traditional nanomedicine but also possess the unique properties of excellent biocompatibility, biodegradability, flexible responsiveness, specific biological function, and synthetic feasibility. Physical methods, enzymatic reaction, chemical reaction, and biosurface induction can yield versatile peptide-based NDDs; flexible responsiveness is their main advantage. Different functional peptides and abundant covalent modifications endow such systems with precise controllability and multifunctionality. Inspired by the above merits, researchers have taken advantage of the self-assembling peptide-based NDDs and achieved the accurate delivery of drugs to the lesion site. The present review outlines the methods for designing self-assembling peptide-based NDDs for small-molecule drugs, with an emphasis on the different drug delivery strategies and their applications in using peptides and peptide conjugates.

Peptide Tectonics: Encoded Structural Complementarity Dictates Programmable Self-Assembly

Programmable self-assembly of peptides into well-defined nanostructures represents one promising approach for bioinspired and biomimetic synthesis of artificial complex systems and functional materials. Despite the progress made over the past two decades in the development of strategies for precise manipulation of the self-assembly of peptides, there is a remarkable gap between current peptide assemblies and biological systems in terms of structural complexity and functions. Here, the concept of peptide tectonics for the creation of well-defined nanostructures predominately driven by the complementary association at the interacting interfaces of tectons is introduced. Peptide tectons are defined as peptide building blocks exhibiting structural complementarity at the interacting interfaces of commensurate domains and undergoing programmable self-assembly into defined supramolecular structures promoted by complementary interactions. Peptide tectons are categorized based on their conformational entropy and the underlying mechanism for the programmable self-assembly of peptide tectons is highlighted focusing on the approaches for incorporating the structural complementarity within tectons. Peptide tectonics not only provides an alternative perspective to understand the self-assembly of peptides, but also allows for precise manipulation of peptide interactions, thus leading to artificial systems with advanced complexity and functions and paves the way toward peptide-related functional materials resembling natural systems.

Supramolecular and dynamic covalent hydrogel scaffolds: from gelation chemistry to enhanced cell retention and cartilage regeneration

This review highlights the most recent progress in gelation strategies of biomedical supramolecular and dynamic covalent crosslinking hydrogels and their applications for enhancing cell retention and cartilage regeneration.

Therapeutic neovascularization promoted by injectable hydrogels

The aim of therapeutic neovascularization is to repair ischemic tissues via formation of new blood vessels by delivery of angiogenic growth factors, stem cells or expansion of pre-existing cells. For efficient neovascularization, controlled release of growth factors is particularly necessary since bolus injection of molecules generally lead to a poor outcome due to inadequate retention within the injured site. In this regard, injectable hydrogels, made of natural, synthetic or hybrid biomaterials, have become a promising solution for efficient delivery of angiogenic factors or stem and progenitor cells for in situ tissue repair, regeneration and neovascularization. This review article will broadly discuss the state-of-the-art in the development of injectable hydrogels from natural and synthetic precursors, and their applications in ischemic tissue repair and wound healing. We will cover a wide range of in vitro and in vivo studies in testing the functionalities of the engineered injectable hydrogels in promoting tissue repair and neovascularization. We will also discuss some of the injectable hydrogels that exhibit self-healing properties by promoting neovascularization without the presence of angiogenic factors.

Kinetic Analysis of Nanostructures Formed by Enzyme-Instructed Intracellular Assemblies against Cancer Cells

Recent studies have demonstrated that enzyme-instructed self-assembly (EISA) in extra- or intracellular environments can serve as a multistep process for controlling cell fate. There is little knowledge, however, about the kinetics of EISA in the complex environments in or around cells. Here, we design and synthesize three dipeptidic precursors (ld-1-SO₃, dl-1-SO₃, dd-1-SO₃), consisting of diphenylalanine (l-Phe-d-Phe, d-Phe-l-Phe, d-Phe-d-Phe, respectively) as the backbone, which are capped by 2-(naphthalen-2-yl)acetic acid at the N-terminal and by 2-(4-(2-aminoethoxy)-4-oxobutanamido)ethane-1-sulfonic acid at the C-terminal. On hydrolysis by carboxylesterases (CES), these precursors result in hydrogelators, which self-assemble in water at different rates. Whereas all three precursors selectively kill cancer cells, especially high-grade serous ovarian carcinoma cells, by undergoing intracellular EISA, dl-1-SO₃ and dd-1-SO₃ exhibit the lowest and the highest activities, respectively, against the cancer cells. This trend inversely correlates with the rates of converting the precursors to the hydrogelators in phosphate-buffered saline. Because CES exists both extra- and intracellularly, we use kinetic modeling to analyze the kinetics of EISA inside cells and to calculate the cytotoxicity of each precursor for killing cancer cells. Our results indicate that (i) the stereochemistry of the precursors affects the morphology of the nanostructures formed by the hydrogelators, as well as the rate of enzymatic conversion; (ii) decreased extracellular hydrolysis of precursors favors intracellular EISA inside the cells; (iii) the inherent features ( e.g., self-assembling ability and morphology) of the EISA molecules largely dictate the cytotoxicity of intracellular EISA. As the kinetic analysis of intracellular EISA, this work elucidates how the stereochemistry modulates EISA in the complex extra- and/or intracellular environment for developing anticancer molecular processes. Moreover, it provides insights for understanding the kinetics and cytotoxicity of aggregates of aberrant proteins or peptides formed inside and outside cells.

Balancing hydrophobicity and sequence pattern to influence self-assembly of amphipathic peptides

Amphipathic peptides with alternating polar and nonpolar amino acid sequences efficiently self-assemble into functional β-sheet fibrils as long as the nonpolar residues have sufficient hydrophobicity. For example, the Ac-(FKFE)2 -NH2 peptide rapidly self-assembles into β-sheet bilayer nanoribbons, while Ac-(AKAE)2 -NH2 fails to self-assemble under similar conditions due to the significantly reduced hydrophobicity and β-sheet propensity of Ala relative to Phe. Herein, we systematically explore the effect of substituting only two of the four Ala residues at various positions in the Ac-(AKAE)2 -NH2 peptide with amino acids of increasing hydrophobicity, β-sheet potential, and surface area (including Phe, 1-naphthylalanine (1-Nal), 2-naphthylalanine (2-Nal), cyclohexylalanine (Cha), and pentafluorophenylalanine (F5 -Phe)) on the self-assembly propensity of the resulting sequences. It was found that double Phe variants, regardless of the position of substitution, failed to self-assemble under the conditions used in this study. In contrast, all double 1-Nal and 2-Nal variants readily self-assembled, albeit at differing rates depending on the substitution patterns. To determine whether this was due to hydrophobicity or side chain surface area, we also prepared double Cha and F5 -Phe variant peptides (both side chain groups are more hydrophobic than Phe). Each of these variants also underwent effective self-assembly, with the aromatic F5 -Phe peptides doing so with greater efficiency. These findings provide insight into the role of amino acid hydrophobicity and sequence pattern on self-assembly proclivity of amphipathic peptides and on how targeted substitutions of nonpolar residues in these sequences can be exploited to tune the characteristics of the resulting self-assembled materials.

Instant Hydrogelation Inspired by Inflammasomes

Based on the recent near-atomic structures of the PYRIN domain of ASC in the protein filament of inflammasomes and the observation that the active form of vitamin B6 (pyridoxal phosphate, P5P) modulates the self-assembly of ASC, we rationally designed an N-terminal capped nonapeptide (Nap-FFKKFKLKL, 1) to form supramolecular nanofibers consisting of α-helix. The addition of P5P to the solution of 1 results in a hydrogel almost instantly (about 4 seconds). Several other endogenous small molecules (for example, pyridoxal, folinic acid, ATP, and AMP) also convert the solution of 1 into a hydrogel. As the demonstration of correlating assemblies of peptides and the relevant protein epitopes, this work illustrates a bioinspired approach to develop supramolecular structures modulated by endogenous small molecules.

Controlling self-assembly of diphenylalanine peptides at high pH using heterocyclic capping groups

Using small angle neutron scattering (SANS), it is shown that the existence of pre-assembled structures at high pH for a capped diphenylalanine hydrogel is controlled by the selection of N-terminal heterocyclic capping group, namely indole or carbazole. At high pH, changing from a somewhat hydrophilic indole capping group to a more hydrophobic carbazole capping group results in a shift from a high proportion of monomers to self-assembled fibers or wormlike micelles. The presence of these different self-assembled structures at high pH is confirmed through NMR and circular dichroism spectroscopy, scanning probe microscopy and cryogenic transmission electron microscopy.

The sensitivity of folding free energy landscapes of trpzips to mutations in the hydrophobic core

The sensitivity of the stability of folded states and free energy landscapes to the differences in the hydrophobic content of the core residues has been studied for the set of 16-residue trpzips, namely, Trpzip4, Trpzip5 and Trpzip6.

Supramolecular Self-assembly of a Model Hydrogelator: Characterization of Fiber Formation and Morphology

Hydrogels are of intense recent interest in connection with biomedical applications ranging from 3-D cell cultures and stem cell differentiation to regenerative medicine, controlled drug delivery and tissue engineering. This prototypical form of soft matter has many emerging material science applications outside the medical field. The physical processes underlying this type of solidification are incompletely understood and this limits design efforts aimed at optimizing these materials for applications. We address this general problem by applying multiple techniques (e.g., NMR, dynamic light scattering, small angle neutron scattering, rheological measurements) to the case of a peptide derivative hydrogelator (molecule 1, NapFFKYp) over a broad range of concentration and temperature to characterize both the formation of individual nanofibers and the fiber network. We believe that a better understanding of the hierarchical self-assembly process and control over the final morphology of this kind of material should have broad significance for biological and medicinal applications utilizing hydrogels.

Extremely Stable Supramolecular Hydrogels Assembled from Nonionic Peptide Amphiphiles

Peptide hydrogels with high stability in different media are of great interest in biomedical applications. In this paper, we report an easy, fast, and scalable method for preparing a family of nonionic peptide amphiphiles (PAs) obtained by direct aminolysis of alkyl-oilgo(γ-benzyl-l-glutamate) samples, which were synthesized via the alkyl amine-initiated sequence ring-opening reaction of α-amino acid N-carboxyanhydrides. One great advantage of this method is that vast chemical diversity and large-scale yields can be achieved easily using commercially available hydramines. These PA samples can readily form a clear hydrogel without any external aid and show exceptionally enhanced gelation properties with a critical gelation concentration as low as 0.05 wt %. The hydrogels are highly stable against extreme pH values of 1 and 14 and a high salt concentration of 200 mM NaCl. These properties combined with the shear-thinning properties make these PA hydrogels ideal candidates for the new generation of injectable scaffolds.

Two-Dimensional Peptide and Protein Assemblies

Two-dimensional nanoscale assemblies (nanosheets) represent a promising structural platform to arrange molecular and supramolecular substrates with precision for integration into devices. This nanoarchitectonic approach has gained significant traction over the last decade, as a general concept to guide the fabrication of functional nanoscale devices. Sequence-specific biomolecules, e.g., peptides and proteins, may be considered excellent substrates for the fabrication of two-dimensional nanoarchitectonics. Molecular level instructions can be encoded within the sequence of monomers, which allows for control over supramolecular structure if suitable design principles could be elaborated. Due to the complexity of interactions between protomers, the development of principles aimed toward rational design of peptide and protein nanosheets is at a nascent stage. This review discusses the known two-dimensional peptide and protein assemblies to further our understanding of how to control the arrangement of molecules in two-dimensions.

Self-Assembled Proteins and Peptides as Scaffolds for Tissue Regeneration

Self-assembling proteins and peptides are increasingly gaining interest for potential use as scaffolds in tissue engineering applications. They self-organize from basic building blocks under mild conditions into supramolecular structures, mimicking the native extracellular matrix. Their properties can be easily tuned through changes at the sequence level. Moreover, they can be produced in sufficient quantities with chemical synthesis or recombinant technologies to allow them to address homogeneity and standardization issues required for applications. Here. recent advances in self-assembling proteins, peptides, and peptide amphiphiles that form scaffolds suitable for tissue engineering are reviewed. The focus is on a variety of motifs, ranging from minimalistic dipeptides, simplistic ultrashort aliphatic peptides, and peptide amphiphiles to large "recombinamer" proteins. Special emphasis is placed on the rational design of self-assembling motifs and biofunctionalization strategies to influence cell behavior and modulate scaffold stability. Perspectives for combination of these "bottom-up" designer strategies with traditional "top-down" biofabrication techniques for new generations of tissue engineering scaffolds are highlighted.

Peptide self-assembly for nanomaterials: the old new kid on the block

Peptide self-assembly is an increasingly attractive tool for nanomaterials. Perfected in biology peptide self-assembling systems have impacted on nearly any conceivable nanomaterial type. However, with all the information available to us commercialisation of peptide materials remains in its infancy. In an attempt to better understand the reasons behind this shortcoming we categorise peptide self-assembled materials in relation to their non-peptide counterparts. A particular emphasis is placed on the versatility of peptide self-assembly in terms of modularity, responsiveness and functional diversity, which enables direct comparisons with more traditional material chemistries.

Supramolecular Glycosylation Accelerates Proteolytic Degradation of Peptide Nanofibrils

Despite the recent consensus that the oligomers of amyloid peptides or aberrant proteins are cytotoxic species, there is still a need for an effective way to eliminate the oligomers. Based on the fact that normal proteins are more glycosylated than pathogenic proteins, we show that a conjugate of nucleobase, peptide, and saccharide binds to peptides from molecular nanofibrils and accelerates the proteolytic degradation of the molecular nanofibrils. As the first example of the use of supramolecular glycosylation to dissociate molecular nanofibrils and to accelerate the degradation of peptide aggregates, this work illustrates a new method that ultimately may lead to an effective approach for degrading cytotoxic oligomers of peptides or aberrant proteins.

NMR Analysis of Tuning Cross-Strand Phe/Tyr/Trp-Trp Interactions in Designed β-Hairpin Peptides: Terminal Switch from L to D Amino Acid as a Strategy for β-Hairpin Capping

Interaction among the side chains of aromatic amino acids is a well-known mechanism of protein and peptide structure stabilization, particularly in β sheets. Using short β-hairpin models bearing the sequence Ac-Leu-Xxx-Val-DPro-Gly-Leu-Trp-Val-NH2, we report the surprising observation of significant destabilization in aryl–tryptophan interactions, which results in poorly folded peptide populations accompanied by lowering of stability. We find that such destabilization arises from forced occupancy of the indole ring in the shielded Edge position, in T-shaped aryl geometries. We demonstrate that this destabilizing effect can be efficiently salvaged by replacing the N-terminal LLeu with DLeu, which causes an increase in the folded hairpin population, while retaining Trp in the Edge position. Our observation of unique cross strand NOEs and data from temperature-dependent NMR and CD measurements reveals the formation of a locally stabilized aliphatic–aromatic network, leading to an overall increase in ΔGF° by ∼ −0.6 to −1.2 kcal/mol. Our results suggest that a contextual evaluation of stabilization by tryptophan is necessary in β hairpins. Furthermore, we report for the first time that the use of D isomers of aliphatic amino acids at the terminus is stabilizing, which can serve as a new strategy for increasing β-hairpin stability.

Mixing biomimetic heterodimers of nucleopeptides to generate biocompatible and biostable supramolecular hydrogels

As a new class of biomaterials, most supramolecular hydrogels formed by small peptides require the attachment of long alkyl chains, multiple aromatic groups, or strong electrostatic interactions. Based on the fact that the most abundant protein assemblies in nature are dimeric, we select short peptide sequences from the interface of a heterodimer of proteins with known crystal structure to conjugate with nucleobases to form nucleopeptides. Being driven mainly by hydrogen bonds, the nucleopeptides self-assemble to form nanofibers, which results in supramolecular hydrogels upon simple mixing of two distinct nucleopeptides in water. Moreover, besides being biocompatible to mammalian cells, the heterodimer of the nucleopeptides exhibit excellent proteolytic resistance against proteinase K. This work illustrates a new and rational approach to create soft biomaterials by a supramolecular hydrogelation triggered by mixing heterodimeric nucleopeptides.

Stimuli responsive fibrous hydrogels from hierarchical self-assembly of a triblock copolypeptide

In this work, the self-assembly behavior and pH responsiveness of a triblock copolypeptide in aqueous media are demonstrated. The copolypeptide was composed of a central pH responsive poly(l-glutamic acid) (PGA), flanked by two hydrophobic poly(l-alanine) blocks (PAla) (PAla5-PGA11-PAla5). This system showed a pH-responsive transition from short tapes to spherical aggregates by increasing the pH, as a result of deprotonation of the PGA block and a conformational change from α-helix to random coil. Increasing the ionic strength to physiological conditions (0.15 M) has triggered fibrillar self-assembly through intermolecular hydrogen bonding of PAla end-blocks that form β-sheet nanostructures, in conjunction with charge screening of the central random coil PGA segments. At elevated concentrations a thermo-responsive free supporting hydrogel was obtained, consisting of rigid β-sheet based twisted superfibers, resulting from hierarchical self-assembly of the copolypeptide. Yet, morphological transformation of this nanostructure was observed upon switching the pH from physiological conditions to pH 4. An unexpected morphology constituted of α-helix-based giant nanobelts was observed as a consequence of the secondary peptide transitions.

Supramolecular three-component amino acid-based hydrogels with superior mechanical strength for controllably promoting nonpathogenic E. coli growth

Novel three-component hybrid hydrogels have been constructed by amino acid derivatives, riboflavin and melamine through self-assembly, which demonstrate excellent mechanical strength (>10⁴ Pa) and low cell toxicity.

Effect of helical flanking sequences on the morphology of polyglutamine-containing fibrils

A peptide model system has been developed to study the effects of helical flanking sequences on polyglutamine aggregation. In a companion manuscript, the kinetics of aggregation are described, comparing the influence of a well-defined heterotetrameric coiled coil to that of the helix-rich structure found in Htt(NT), a 17-residue flanking sequence found in the huntingtin protein, on polyglutamine aggregation. Here, the morphological characterization of the resultant fibrils that form for a set of peptides is reported, only one of which, KKQ25KK, has been previously studied. A careful analysis of TEM and AFM images of KKQ25KK confirms that it forms bundled fibrils of varying length and reveals, unexpectedly, that they are composed of fully extended cross-β-strands. Second, it is shown that helical flanking sequences do not disrupt the assembly of a core cross-β-sheet structure, but such flanking sequences can influence higher order processes, such as inhibiting the bundling of the fibrils.

Two-step self-assembly of liposome-multidomain peptide nanofiber hydrogel for time-controlled release

Progress in self-assembly and supramolecular chemistry has been directed toward obtaining macromolecular assemblies with higher degrees of complexity, simulating the highly structured environment in natural systems. One approach to this type of complexity are multistep, multicomponent, self-assembling systems that allow approaches comparable to traditional multistep synthetic organic chemistry; however, only a few examples of this approach have appeared in the literature. Our previous work demonstrated nanofibrous mimics of the extracellular matrix. Here we demonstrate the ability to create a unique hydrogel, developed by stepwise self-assembly of multidomain peptide fibers and liposomes. The two-component system allows for controlled release of bioactive factors at multiple time points. The individual components of the self-assembled gel and the composite hydrogel were characterized by TEM, SEM, and rheometry, demonstrating that peptide nanofibers and lipid vesicles both retain their structural integrity in the composite gel. The rheological robustness of the hydrogel is shown to be largely unaffected by the presence of liposomes. Release studies from the composite gels loaded with different growth factors EGF, MCP-1, and PlGF-1 showed delay and prolongation of release by liposomes entrapped in the hydrogel compared to more rapid release from the hydrogel alone. This bimodal release system may have utility in systems where timed cascades of biological signals may be valuable, such as in tissue regeneration.

Factors that drive peptide assembly from native to amyloid structures: experimental and theoretical analysis of [leu-5]-enkephalin mutants

Five different mutants of [Leu-5] Enkephalin YGGFL peptide have been investigated for fibril formation propensities. The early oligomer structures have been probed with a combination of ion-mobility mass spectrometry and computational modeling. The two peptides YVIFL and YVVFL form oligomers and amyloid-like fibrils. YVVFV shows an early stage oligomer distribution similar to those of the previous two, but amyloid-like aggregates are less abundant. Atomic resolution X-ray structures of YVVFV show two different modes of interactions at the dry interface between steric zippers and pairs of antiparallel β-sheets, but both are less favorable than the packing motif found in YVVFL. Both YVVFV and YVVFL can form a Class 6 steric zipper. However, in YVVFV, the strands between mating sheets are parallel to each other and in YVVFL they are antiparallel. The overall data highlight the importance of structurally characterizing high order oligomers within oligomerization pathways in studies of nanostructure assembly.

Aggregation gatekeeper and controlled assembly of Trpzip β-hairpins

Protein and peptide aggregation is an important issue both in vivo and in vitro. Herein, we examine the aggregation behaviors of two well-studied β-hairpins, Trpzip1 and Trpzip2. Previous studies suggested that Trpzip2 remains monomeric up to a concentration of ~15 mM whereas Trpzip1 readily aggregates at micromolar concentrations at acidic or neutral pH. This disparity is puzzling considering that these two peptides differ only in their turn sequences (i.e., GN vs NG). We hypothesize that these peptides can aggregate from their folded states via native edge-to-edge interactions and that the Lys8 residue in Trpzip2 is a more effective aggregation gatekeeper, because of a more favorable orientation. In support of this hypothesis, we find that increasing the pH to 13 or replacing Lys8 with a hydrophobic and photolabile Lys analogue, Lys(nvoc), leads to a significant increase in the aggregation propensity of Trpzip2, and that the aggregation of this Trpzip2 mutant can be reversed upon restoring the native Lys side chain via photocleavage of the nvoc moiety. In addition, we find that while both Trpzip1 and Trpzip2 form parallel β-sheet aggregates, the Lys(nvoc) Trpzip2 mutant forms antiparallel β-sheets and more stable fibrils. Taken together, these findings provide another example showing how sensitive peptide and protein aggregation is to minor sequence variation and that it is possible to use a photolabile non-natural amino acid, such as Lys(nvoc), to tune the rate of peptide aggregation and to control fibrillar structure.

In situ generation of redox active peptides driven by selenoester mediated native chemical ligation

Redox active peptides synthesized via selenoester mediated native chemical ligation with a propensity to self-assemble in aqueous medium. A gel–sol transition of self-assembled peptide in a reducing environment makes it a versatile candidate for the development of functional biomaterials.

Formation of a pseudo-β-hairpin motif utilizing the Ant–Pro reverse turn: consequences of stereochemical reordering

Herein, we report a special case of pseudo-β-hairpin formation by tetrapeptide sequences featuring a two-residue Ant–Pro dipeptide motif (Ant = anthranilic acid and Pro = proline) at the loop region.

Reversible photocontrol of self-assembled peptide hydrogel viscoelasticity

Peptide hydrogels are promising biomaterials for applications ranging from drug delivery to tissue engineering.