A New Catalytically Active Colloidal Platinum Nanocatalyst: The Multiarmed Nanostar Single Crystal

Fluorine Substitution of TCNQ Alters the Redox-Driven Catalytic Pathway for the Ferricyanide-Thiosulfate Reaction

Mechanistic variation in catalysis through substituent-based redox tuning is well established. Fluorination of TCNQ (TCNQ=tetracyanoquinodimethane) provides ~850 mV variation in the redox potentials of theTCNQF n 0 / 1 - ${{{\rm {TCNQF}}}_{{\rm {n}}}^{{\rm {0/1-}}}}$ andTCNQF n 1 - / 2 - ${{{\rm {TCNQF}}}_{{\rm {n}}}^{{\rm {1-/2-}}}}$ (n=0, 2, 4) processes. WithTCNQF 4 1 - ${{{\rm {TCNQF}}}_{{\rm {4}}}^{{\rm {1-}}}}$ , catalysis of the kinetically very slow ferrocyanide-thiosulfate redox reaction in aqueous solution occurs via a mechanism in which the catalystTCNQF 4 1 - ${{{\rm {TCNQF}}}_{{\rm {4}}}^{{\rm {1-}}}}$ is reduced toTCNQF 4 2 - ${{{\rm {TCNQF}}}_{{\rm {4}}}^{{\rm {2-}}}}$ when reacting withS 2 O 3 2 - ${{{\rm {S}}}_{{\rm {2}}}{{\rm {O}}}_{{\rm {3}}}^{{\rm {2-}}}}$ which is oxidised toS 4 O 6 2 - ${{{\rm {S}}}_{{\rm {4}}}{{\rm {O}}}_{{\rm {6}}}^{{\rm {2-}}}}$ . Subsequently,TCNQF 4 2 - ${{{\rm {TCNQF}}}_{{\rm {4}}}^{{\rm {2-}}}}$ reacts with[ Fe ( CN ) 6 ]​ 3 - ${{{\rm {[Fe(CN)}}}_{{\rm {6}}}{{\rm {]}}}^{{\rm {3-}}}}$ to form[ Fe ( CN ) 6 ]​ 4 - ${{{\rm {[Fe(CN)}}}_{{\rm {6}}}{{\rm {]}}}^{{\rm {4-}}}}$ and reform theTCNQF 4 1 - ${{{\rm {TCNQF}}}_{{\rm {4}}}^{{\rm {1-}}}}$ catalyst, in another thermodynamically favoured process. An analogous mechanism applies withTCNQF 2 1 - ${{{\rm {TCNQF}}}_{{\rm {2}}}^{{\rm {1-}}}}$ as a catalyst. In contrast, since the reaction ofS 2 O 3 2 - ${{{\rm {S}}}_{{\rm {2}}}{{\rm {O}}}_{{\rm {3}}}^{{\rm {2-}}}}$ withTCNQ 1 - ${{{\rm {TCNQ}}}^{{\rm {1-}}}}$ is thermodynamically unfavourable, an alternative mechanism is required to explain the catalytic activity observed in this non-fluorinated system. Here, upon addition ofTCNQ 1 - ${{{\rm {TCNQ}}}^{{\rm {1-}}}}$ , reduction of[ Fe ( CN ) 6 ]​ 3 - ${{{\rm {[Fe(CN)}}}_{{\rm {6}}}{{\rm {]}}}^{{\rm {3-}}}}$ to[ Fe ( CN ) 6 ]​ 4 - ${{{\rm {[Fe(CN)}}}_{{\rm {6}}}{{\rm {]}}}^{{\rm {4-}}}}$ occurs with concomitant oxidation ofTCNQ 1 - ${{{\rm {TCNQ}}}^{{\rm {1-}}}}$ toTCNQ 0 ${{{\rm {TCNQ}}}^{{\rm {0}}}}$ , which then acts as the catalyst forS 2 O 3 2 - ${{{\rm {S}}}_{{\rm {2}}}{{\rm {O}}}_{{\rm {3}}}^{{\rm {2-}}}}$ oxidation. Thermodynamic data explain the observed differences in the catalytic mechanisms.CuTCNQF n ${{{\rm {CuTCNQF}}}_{{\rm {n}}}}$ (n=0, 4) also act as catalysts for the ferricyanide-thiosulfate reaction in aqueous solution. The present study shows that homogeneous pathways are available following addition of these dissolved materials. Previously, theseCuTCNQF n ${{{\rm {CuTCNQF}}}_{{\rm {n}}}}$ (n=0, 4) coordination polymers have been regarded as insoluble in water and proposed as heterogeneous catalysts for the ferricyanide-thiosulfate reaction. Details and mechanistic differences were established using UV-visible spectrophotometry and cyclic voltammetry.

Pt cocatalyst morphology on semiconductor nanorod photocatalysts enhances charge trapping and water reduction

In photocatalysis, metal-semiconductor hybrid structures have been proposed for ideal photocatalytic systems. In this study, we investigate the effect of morphology and surface nature of Pt cocatalysts on photocatalytic hydrogen evolution activity in Pt-tipped CdSe nanorods. Three distinct morphologies of Pt cocatalysts were synthesized and employed as visible light photocatalysts. The rough tips exhibit the highest activity, followed by the round and cubic tips. Kinetic investigations using transient absorption spectroscopy reveal that the cubic tips exhibit lower charge-separated states feasible for reacting with water and water reduction rates due to their defectless surface facets. In contrast, the rough tips show a similar charge-separation value but a two-fold higher surface reaction rate than the round tips, resulting in a significant enhancement of hydrogen evolution. These findings highlight the importance of rational design on metal cocatalysts in addition to the main semiconductor bodies for maximizing photocatalytic activities.

Noble metal nanodendrites: growth mechanisms, synthesis strategies and applications

Inorganic nanodendrites (NDs) have become a kind of advanced nanomaterials with broad application prospects because of their unique branched architecture. The structural characteristics of nanodendrites include highly branched morphology, abundant tips/edges and high-index crystal planes, and a high atomic utilization rate, which give them great potential for usage in the fields of electrocatalysis, sensing, and therapeutics. Therefore, the rational design and controlled synthesis of inorganic (especially noble metals) nanodendrites have attracted widespread attention nowadays. The development of synthesis strategies and characterization methodology provides unprecedented opportunities for the preparation of abundant nanodendrites with interesting crystallographic structures, morphologies, and application performances. In this review, we systematically summarize the formation mechanisms of noble metal nanodendrites reported in recent years, with a special focus on surfactant-mediated mechanisms. Some typical examples obtained by innovative synthetic methods are then highlighted and recent advances in the application of noble metal nanodendrites are carefully discussed. Finally, we conclude and present the prospects for the future development of nanodendrites. This review helps to deeply understand the synthesis and application of noble metal nanodendrites and may provide some inspiration to develop novel functional nanomaterials (especially electrocatalysts) with enhanced performance.

Trends in Application of SERS Substrates beyond Ag and Au, and Their Role in Bioanalysis

This article compares the applications of traditional gold and silver-based SERS substrates and less conventional (Pd/Pt, Cu, Al, Si-based) SERS substrates, focusing on sensing, biosensing, and clinical analysis. In recent decades plethora of new biosensing and clinical SERS applications have fueled the search for more cost-effective, scalable, and stable substrates since traditional gold and silver-based substrates are quite expensive, prone to corrosion, contamination and non-specific binding, particularly by S-containing compounds. Following that, we briefly described our experimental experience with Si and Al-based SERS substrates and systematically analyzed the literature on SERS on substrate materials such as Pd/Pt, Cu, Al, and Si. We tabulated and discussed figures of merit such as enhancement factor (EF) and limit of detection (LOD) from analytical applications of these substrates. The results of the comparison showed that Pd/Pt substrates are not practical due to their high cost; Cu-based substrates are less stable and produce lower signal enhancement. Si and Al-based substrates showed promising results, particularly in combination with gold and silver nanostructures since they could produce comparable EFs and LODs as conventional substrates. In addition, their stability and relatively low cost make them viable alternatives for gold and silver-based substrates. Finally, this review highlighted and compared the clinical performance of non-traditional SERS substrates and traditional gold and silver SERS substrates. We discovered that if we take the average sensitivity, specificity, and accuracy of clinical SERS assays reported in the literature, those parameters, particularly accuracy (93-94%), are similar for SERS bioassays on AgNP@Al, Si-based, Au-based, and Ag-based substrates. We hope that this review will encourage research into SERS biosensing on aluminum, silicon, and some other substrates. These Al and Si based substrates may respond efficiently to the major challenges to the SERS practical application. For instance, they may be not only less expensive, e.g., Al foil, but also in some cases more selective and sometimes more reproducible, when compared to gold-only or silver-only based SERS substrates. Overall, it may result in a greater diversity of applicable SERS substrates, allowing for better optimization and selection of the SERS substrate for a specific sensing/biosensing or clinical application.

Au-on-Ag nanostructure forin-situSERS monitoring of catalytic reactions

Dual-functionality Au-on-Ag nanostructures (AOA) were fabricated on a silicon substrate by first immobilizing citrate-reduced Ag nanoparticles (Ag NPs, ∼43 nm in diameter), followed by depositing ∼7 nm Au nanofilms (Au NFs) via thermal evaporation. Au NFs were introduced for their catalytic activity in concave-convex nano-configuration. Ag NPs underneath were used for their significant enhancement factor (EF) in surface-enhanced Raman scattering (SERS)-based measurements of analytes of interest. Rhodamine 6G (R6G) was utilized as the Raman-probe to evaluate the SERS sensitivity of AOA. The SERS EF of AOA is ∼37 times than that of Au NPs. Using reduction of 4-nitrothiophenol (4-NTP) by sodium borohydride (NaBH₄) as a model reaction, we demonstrated the robust catalytic activity of AOA as well as its capacity to continuously monitor via SERS the disappearance of reactant 4-NTP, emergence and disappearance of intermediate 4,4'-DMAB, and the appearance of product 4-ATP throughout the reduction process in real-time andin situ.

Surfactant-Assisted Synthesis of Pt Nanocubes Using Poly(N-isopropylacrylamide) Nanogels

Poly(N-isopropylacrylamide) (PNIPAM) nanogels were prepared by emulsion polymerization using sodium dodecyl sulfate (SDS) and employed as a capping agent in platinum nanoparticle (Pt NP) synthesis by liquid-phase reduction with hydrogen gas. When the PNIPAM nanogels were used without removing SDS, that is, a slight amount of SDS was included in the reaction solution, Pt nanocubes (NCs) were predominantly produced (>80%). The proportion of the resultant Pt NCs was much higher than that obtained using the PNIPAM linear polymer (∼60%). To clarify the effects of the three-dimensional polymer network and SDS, we synthesized Pt NPs using the PNIPAM nanogel without SDS (SDS-free PNIPAM nanogel) and found that Pt NCs are rarely formed, and most NPs obtained have an irregular shape. When only SDS was used as a capping agent, NCs were hardly obtained, but other polyhedral NPs were formed. Furthermore, the use of SDS together with the PNIPAM polymer led to the decrease in the proportion of the Pt NCs compared with that obtained using only the linear polymer. These results indicate that the enhancement of the Pt NC proportion using the PNIPAM nanogel with SDS is attributable to not only the three-dimensional polymer network of the PNIPAM nanogel but also the assist of SDS as a capping agent.

General in Colloidal Nanoparticles

It is almost impossible to fabricate size-controlled nanomaterials without full understanding about nanoscience, because nanomaterials sometimes suddenly grow up and precipitated, meanwhile other nanomaterials are disappeared during fabrication process. With this reason, it is necessary to understand the principle theories about nanoscience for fabrication of "well-defined" nanoparticles. This chapter explains basic theories about nanomaterials. And based on the theory, methods for controlling the size of nanoparticles and preventing the aggregation after fabrication are described.

Evolution of Pt truncated octahedra to nanodendrites during the synthesis in methanol–water solution

The size and shape of the Pt particles could be tuned from truncated octahedra (3.5 nm) to nanodendrites (13.5 nm) by simply varying the CH₃OH/H₂O ratio in the synthetic solution.

Synthesis and applications of anisotropic nanoparticles with precisely defined dimensions

Shape and size play powerful roles in determining the properties of a material; controlling these aspects with precision is therefore an important, fundamental goal of the chemical sciences. In particular, the introduction of shape anisotropy at the nanoscale has emerged as a potent way to access new properties and functionality, enabling the exploration of complex nanomaterials across a range of applications. Recent advances in DNA and protein nanotechnology, inorganic crystallization techniques, and precision polymer self-assembly are now enabling unprecedented control over the synthesis of anisotropic nanoparticles with a variety of shapes, encompassing one-dimensional rods, dumbbells and wires, two-dimensional and three-dimensional platelets, rings, polyhedra, stars, and more. This has, in turn, enabled much progress to be made in our understanding of how anisotropy and particle dimensions can be tuned to produce materials with unique and optimized properties. In this Review, we bring these recent developments together to critically appraise the different methods for the bottom-up synthesis of anisotropic nanoparticles enabling exquisite control over morphology and dimensions. We highlight the unique properties of these materials in arenas as diverse as electron transport and biological processing, illustrating how they can be leveraged to produce devices and materials with otherwise inaccessible functionality. By making size and shape our focus, we aim to identify potential synergies between different disciplines and produce a road map for future research in this crucial area.

Development of nanotubes coated with platinum nanodendrites using a virus as a template

We developed a facile method to fabricate platinum (Pt) porous nanotubes coated with interconnected Pt dendrites using the tobacco mosaic virus (TMV) as a template. The surface-exposed arginine residues of the TMV induced the selective deposition of Pt seeds on the TMV outside surface, and poly(sodium-p-styrenesulfonate) (PSS) was chosen to stabilize the dispersity of TMV coated with Pt seeds (TMV/SPt). The limited space between the Pt seeds and their uniform distribution on the TMV exterior confined the growth of Pt dendrites, resulting in continuous dendritic platinum nanotubes (TMV/DPtNT). The synergistic effects of porous dendrites and anisotropic structures of the TMV/DPtNTs provided an increase in the active sites, the enhancement of transport efficiency and long-distance electron transfer, which greatly improved the catalytic activity. We also demonstrated that such nanotubes could be used in the detection of H₂O₂ with good sensitivity.

Controlled Overgrowth of Five-Fold Concave Nanoparticles into Plasmonic Nanostars and Their Single-Particle Scattering Properties

Growth of anisotropic nanostructures enables the manipulation of optical properties across the electromagnetic spectrum by fine morphological tuning of the nanoparticles. Among them, stellated metallic nanostructures present enhanced properties owing to their complex shape, and hence, the control over the final morphology becomes of great importance. Herein, a seed-mediated method for the high-yield production of gold_rich-copper concave branched nanostructures and their structural and optical characterization is reported. The synthesis protocol enabled excellent control and tunability of the final morphology, from concave pentagonal nanoparticles to five-fold branched nanoparticles, named "nanostars". The anisotropic shape was achieved via kinetic control over the synthesis conditions by selective passivation of facets using a capping agent and assisted by the presence of copper chloride ions, both having a crucial impact over the final structure. Optical extinction measurements of nanostars in solution indicated a broad spectral response, hiding the properties of the individual nanostars. Hence, single-particle scattering measurements of individual concave pentagonal nanoparticles and concave nanostars were performed to determine the origin of the multiple plasmon bands by correlation with their morphological features, following their growth evolution. Finite-difference time-domain calculations delivered insights into the geometry-dependent plasmonic properties of concave nanostars and their packed aggregates. Our results uncover the intrinsic scattering properties of individual nanostars and the origin of the broad spectral response, which is mostly due to z-direction packed aggregates.

Recent Advances in the Nanocatalysts-assisted NaBH4 Reduction of Nitroaromatics in water

In view of the increasing applications of nanocatalysis in chemical transformations, this article illustrates recent advances on the use of nanocatalysts for an important reduction reaction, the hydrogenation of nitroaromatics to significant aminoaromatics with aqueous NaBH₄ solution; the utility of mono- and multi-metal nanocatalysts with special emphasis on heterogeneous nanocatalysts are included. A progressive trend on the applicability of nanocatalysts is also incorporated with large scale application and their sustainable recyclization and reuse utilizing supported and magnetic nanocatalysts; representative methods for the synthesis of such reusable nanocatalysts are featured.

Nano-architecture of silica nanoparticles as a tool to tune both electrochemical and catalytic behavior of NiII@SiO2

The present work introduces a facile synthetic route for efficient doping of [Ni^II(bpy)_x] into silica nanoparticles with various sizes and architectures. Variation of the latter results in different concentrations of the Ni^II complexes at the interface of the composite nanoparticles. The UV-Vis analysis of the nanoparticles reveals changes in the inner-sphere environment of the Ni^II complexes when embedded into the nanoparticles, while the inner-sphere of Ni^II is invariant for the nanoparticles with different architecture. Comparative analysis of the electrochemically generated redox transformations of the Ni^II complexes embedded in the nanoparticles of various architectures reveals the latter as the main factor controlling the accessibility of Ni^II complexes to the redox transitions which, in turn, controls the electrochemical behavior of the nanoparticles. The work also highlights an impact of the nanoparticulate architecture in catalytic activity of the Ni^II complexes within the different nanoparticles in oxidative C–H fluoroalkylation of caffeine. Both low leakage and high concentration of the Ni^II complexes at the interface of the composite nanoparticles enables fluoroalkylated caffeine to be obtained in high yields under recycling of the nanocatalyst five times at least.

The present work introduces a facile synthetic route for efficient doping of [Ni^II(bpy)_x] into silica nanoparticles with various sizes and architectures.

Colloidal Assembly Approaches to Micro/Nanostructures of Complex Morphologies

The ability to programmatically assemble colloidal micro/nanostructures into highly ordered superstructures is of great importance in both fundamental studies and practical applications. In addition to the sophisticated manipulation of the short-range and long-range interactions imposed on the colloidal building blocks, the intrinsic shape elements including face, edge, corner, concave, convex, and curvature also play very important roles in solving the "jigsaw puzzle" of the superstructures. Here, the recent progress in the development of colloidal assembly strategies for the formation of complex superstructures is reviewed, with a primary focus on the unique effects of the morphology of the building blocks to the assembly processes and the final structures. Overall, this Review aims to shed light on the fundamental understanding of the colloidal behaviors of complex micro/nanostructures and promote the continued development of effective strategies for the creation of functional materials with complex compositions and morphologies.

One-pot synthesis of CuPt nanodendrites with enhanced activity towards methanol oxidation reaction

CuPt nanodendrites have special electrocatalytic performance due to their unique morphologies and structures. In this work, we report a facile and one-pot synthesis of highly branched and dispersed CuPt nanodendrites with a size of about 22 nm and Pt/Cu ratio of 2 : 1. X-ray photoelectron spectra indicate a Pt-rich surface of the prepared CuPt nanodendrites. The combination of a highly branched structure with a Pt-rich shell would be very beneficial for catalytic properties, which was confirmed by electrochemical tests towards MOR. A systematic study on morphology evolution of the products and understanding of their growth mechanism was carried out using the effects of reaction time and reducing agents.

CuPt nanodendrites have special electrocatalytic performance due to their unique morphology and structures.

Novel Au Catalysis Strategy for the Synthesis of Au@Pt Core-Shell Nanoelectrocatalyst with Self-Controlled Quasi-Monolayer Pt Skin

Design of catalytically active Pt-based catalysts with minimizing the usage of Pt is a major issue in fuel cells. Herein, for the first time, we have developed a Au catalytic reduction strategy to synthesize a Au@Pt core-shell electrocatalyst with a quasi-monolayer Pt skin spontaneously formed from the gold surface catalysis. In the presence of presynthesized gold nanocrystals (used as the catalyst and Au seeds) and 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid buffer (used as reductant), under the Au surface catalysis, platinum ions can be reduced and deposited on the gold nanocrystals to form a Pt skin surface with a quasi-monatomic thickness. In the present strategy, Pt ions can be reduced only under the catalysis of gold surface and thus when the surface of Au NPs is covered by a monatomic Pt layer, the reduction reaction of Pt ions will be spontaneously turned off. Therefore, the significant advantage of this synthesis strategy is that the formation of quasi-monolayer Pt skin surface can be self-controlled and is completely free of controlling the dosage of platinum ions and the size distribution of Au cores. The synthesized Au@Pt core@shell structure exhibited enhanced electrocatalytic activities for oxygen reduction reaction and methanol oxidation reaction, which are 6.87 and 10.17 times greater than those of Pt/C catalyst, respectively. The present study provides a new strategy for obtaining high-performance bimetallic/multimetallic electrocatalysts with high utilization of precious metals.

One-pot synthesis of PtRu nanodendrites as efficient catalysts for methanol oxidation reaction

Bimetallic Pt-based nanodendrites are of particular interest in various catalytic applications due to their high surface areas and low densities. Herein, we provide a facile method for one-pot synthesis of PtRu nanodendrites via the co-reduction of Pt and Ru precursors in oleylamine by H₂. The as-fabricated PtRu nanodendrites exhibit superior catalytic activity and durability compared with PtRu nanocrystals (NCs), synthesized under the same reaction conditions, and the commercial Pt/C catalyst towards the methanol oxidation reaction (MOR).

Bulk Surfaces Coated with Triangular Silver Nanoplates: Antibacterial Action Based on Silver Release and Photo-Thermal Effect

A layer of silver nanoplates, specifically synthesized with the desired localized surface plasmon resonance (LSPR) features, was grafted on amino-functionalized bulk glass surfaces to impart a double antibacterial action: (i) the well-known, long-term antibacterial effect based on the release of Ag⁺; (ii) an "on demand" action which can be switched on by the use of photo-thermal properties of silver nano-objects. Irradiation of these samples with a laser having a wavelength falling into the so called "therapeutic window" of the near infrared region allows the reinforcement, in the timescale of minutes, of the classical antibacterial effect of silver nanoparticles. We demonstrate how using the two actions allows for almost complete elimination of the population of two bacterial strains of representative Gram-positive and Gram-negative bacteria.

Using gold nanostars modified pencil graphite electrode as a novel substrate for design a sensitive and selective Dopamine aptasensor

For the first time, gold nanostars (GNS) were applied for electrostatic and covalent immobilizing a thiol modified Dopamine aptamer on the pencil graphite electrode and signal amplification. Dopamine aptamer was immobilized on the gold nanostars through electrostatic interaction between negatively charged phosphate groups of aptamer and positively charged gold nanostars and AuS well known covalent interaction. In the presence of Dopamine in the test solution, the charge transfer resistance (R_CT) on the electrode surface increased with the increase of the Dopamine concentration due to specific interaction between Dopamine aptamer and Dopamine molecules, which made a barrier for electrons and inhibited the electron-transfer. So, the proposed approach showed a high sensitivity and a wide linearity to Dopamine in the range from 1.0 (±0.1) to 100.0 (±0.3) ngL^-1 (ppt) with detection and quantification limits of 0.29 (±0.10) and 0.90 (±0.08) ngL^-1 (ppt), respectively. Finally, the sensor was successfully used for determination of Dopamine in biological (human blood plasma and urine) samples. The results open up the path for manufacturing cost effective aptasensors for other biomedical applications.

High Durable Ternary Nanodendrites as Effective Catalysts for Oxygen Reduction Reaction

Exploiting high catalytic activities and superior durability is significant for the lifetime and the cost of electro-catalysts for oxygen reduction reaction (ORR). Pt-Ni nanocrystals have attracted considerable attention owing to their exceptionally catalytic performance. However, the durability of Pt-Ni nanoparticles in acid media is still far below satisfaction. Consequently, improving the durability is extremely urgent for the application of Pt-Ni catalysts. To this end, we herein develop Pt-Ni-Ir ternary nanocrystals with dendritic shape, which are synthesized through a facile one-pot strategy. Such nanostructures featured with multibranches show an area specific activity of 1.58 mA cm(-2), seven times more than that of the commercial Pt/C catalyst (0.21 mA cm(-2)). More importantly, the dendritic Pt-Ni-Ir catalyst displays extraordinarily high durability. In contrast to the commercial Pt/C counterparts, which exhibit losses of 53.2% in EASA and 41% in area specific activity after 12 000 cycles of sweeping in the potential range of 0.6-1.1 V, only respective losses of 5.5% and 6% are detected for our dendritic Pt-Ni-Ir catalyst. The high activity and remarkable durability are mainly attributed to the dendritic morphology and the introduction of Ir. This work demonstrates that the Pt-Ni-Ir dendritic nanostructures are promising electro-catalysts for ORR.

Micelle-templated synthesis of Pt hollow nanospheres for catalytic hydrogen evolution

We report an efficient, mild and simple strategy for the fabrication of colloidal hollow platinum nanospheres with the ability to tune wall-thickness and void-space over several nanometers, for application in hydrogen evolution from ammonia–borane.

Seed mediated growth of silver nanoplates on glass: exploiting the bimodal antibacterial effect by near IR photo-thermal action and Ag+ release

Silver nanoplates synthesized with the desired features directly on glass show a bimodal antibacterial action: Ag⁺ release and NIR laser switchable hyperthermia.

Faceted metal and metal oxide nanoparticles: design, fabrication and catalysis

The review addresses new advances in metal, bimetallic, metal oxide, and composite particles in their nanoregime for facet-selective catalytic applications. The synthesis and growth mechanisms of the particles have been summarized in brief in this review with a view to develop critical examination of the faceted morphology of the particles for catalysis. The size, shape and composition of the particles have been found to be largely irrelevant in comparison to the nature of facets in catalysis. Thus selective high- and low-index facets have been found to selectively promote adsorption, which eventually leads to an effective catalytic reaction. As a consequence, a high density of atoms rest at the corners, steps, stages, kinks etc on the catalyst surface in order to host the adsorbate efficiently and catalyze the reaction. Again, surface atomic arrangement and bond length have been found to play a dominant role in adsorption, leading to effective catalysis.

Super-radiant plasmon mode is more efficient for SERS than the sub-radiant mode in highly packed 2D gold nanocube arrays

The field coupling in highly packed plasmonic nanoparticle arrays is not localized due to the energy transport via the sub-radiant plasmon modes, which is formed in addition to the regular super-radiant plasmon mode. Unlike the sub-radiant mode, the plasmon field of the super-radiant mode cannot extend over long distances since it decays radiatively with a shorter lifetime. The coupling of the plasmon fields of gold nanocubes (AuNCs) when organized into highly packed 2D arrays was examined experimentally. Multiple plasmon resonance optical peaks are observed for the AuNC arrays and are compared to those calculated using the discrete dipole approximation. The calculated electromagnetic plasmon fields of the arrays displayed high field intensity for the nanocubes located in the center of the arrays for the lower energy super-radiant mode, while the higher energy sub-radiant plasmon mode displayed high field intensity at the edges of the arrays. The Raman signal enhancement by the super-radiant plasmon mode was found to be one hundred fold greater than that by sub-radiant plasmon mode because the super-radiant mode has higher scattering and stronger plasmon field intensity relative to the sub-radiant mode.

Oxide-supported Ir nanodendrites with high activity and durability for the oxygen evolution reaction in acid PEM water electrolyzers

Reducing the noble-metal catalyst content of acid Polymer Electrolyte Membrane (PEM) water electrolyzers without compromising catalytic activity and stability is a goal of fundamental scientific interest and substantial technical importance for cost-effective hydrogen-based energy storage. This study presents nanostructured iridium nanodendrites (Ir-ND) supported on antimony doped tin oxide (ATO) as efficient and stable water splitting catalysts for PEM electrolyzers. The active Ir-ND structures exhibited superior structural and morphological properties, such as particle size and surface area compared to commercial state-of-art Ir catalysts. Supported on tailored corrosion-stable conductive oxides, the Ir-ND catalysts exhibited a more than 2-fold larger kinetic water splitting activity compared with supported Ir nanoparticles, and a more than 8-fold larger catalytic activity than commercial Ir blacks. In single-cell PEM electrolyzer tests, the Ir-ND/ATO outperformed commercial Ir catalysts more than 2-fold at technological current densities of 1.5 A cm-2 at a mere 1.80 V cell voltage, while showing excellent durability under constant current conditions. We conclude that Ir-ND/ATO catalysts have the potential to substantially reduce the required noble metal loading, while maintaining their catalytic performance, both in idealized three-electrode set ups and in the real electrolyzer device environments.

Interfacial Synthesis of Two-Dimensional Dendritic Platinum Nanoparticles Using Oleic Acid-in-Water Emulsion

Here we propose facile and scalable synthesis of two-dimensional (2D) dendritic platinum nanoparticle at room temperature by exploiting an oil-in-water emulsion. The interfacial synthesis selectively provides platinum nanoparticle with 2D structure in high yield by controlling key reactants such as the amount of oleic acid and the concentration of block copolymer. Electrocatalytic activity of 2D dendritic platinum nanoparticle for oxygen reduction and methanol oxidation reaction is also examined.

Synthesis of Pt dendritic nanocubes with enhanced catalytic properties

Pt dendritic nanocubes (DNCs) were successfully synthesized in oleylamine under a 1 bar H₂ atmosphere. The catalytic activity of Pt DNCs was much greater than conventional Pt nanoparticles (NPs) for methanol electrooxidation.

A three dimensional Pt nanodendrite/graphene/MnO2 nanoflower modified electrode for the sensitive and selective detection of dopamine

A highly sensitive and selective electrochemical sensor: a 3D hierarchical ternary composite including a Pt nanodendrite/reduced graphene oxide/MnO₂ nanoflower modified electrode.

Evolution from small sized Au nanoparticles to hollow Pt/Au nanostructures with Pt nanorods and a mechanistic study

A facile method for synthesizing hollow Au/Pt nanostructures is reported; this strategy involves using small sized Au nanoparticles (NPs) as seeds and KI as growth modifier.

Synthesis of dendritic iridium nanostructures based on the oriented attachment mechanism and their enhanced CO and ammonia catalytic activities

Branched iridium nanodendrites (Ir NDs) have been synthesized by a simple method based on the oriented attachment mechanism. Transmission electron microscopy images reveal the temporal growth process from small particles to NDs. Precursor concentrations and reaction temperatures have a limited effect on the morphology of Ir NDs. Metal oxide and hydroxide-supported Ir NDs exhibit enhanced activity for catalytic CO oxidation. Particularly, the Fe(OH)x-supported Ir NDs catalyst with a 4 wt% Ir loading show superior CO oxidation catalytic activity with a full conversion of CO at 120 °C. Furthermore, compared with Ir NPs and commercial Ir black, Ir NDs exhibit higher activity and stability for ammonia oxidation. The specific activity and mass activity of Ir NDs for ammonia oxidation are 1.7 and 7 times higher than that of Ir NPs. The improved catalytic activities of Ir NDs are attributed not only to their large specific surface area, but also to their considerably high index facets and rich edge and corner atoms. Hence, the obtained Ir NDs provide a promising alternative for direct ammonia fuel cells and proton-exchange membrane fuel cells.

Fabrication of Au@Pt multibranched nanoparticles and their application to in situ SERS monitoring

Here, we present an Au@Pt core-shell multibranched nanoparticle as a new substrate capable of in situ surface-enhanced Raman scattering (SERS), thereby enabling monitoring of the catalytic reaction on the active surface. By careful control of the amount of Pt deposited bimetallic Au@Pt, nanoparticles with moderate performance both for SERS and catalytic activity were obtained. The Pt-catalyzed reduction of 4-nitrothiophenol by borohydride was chosen as the model reaction. The intermediate during the reaction was captured and clearly identified via SERS spectroscopy. We established in situ SERS spectroscopy as a promising and powerful technique to investigate in situ reactions taking place in heterogeneous catalysis.