Systematic studies on structural parameters for nanotubular assembly of hexa-peri-hexabenzocoronenes

Study of absorption and emission spectra of substituted terthiophene compounds by methods of theoretical chemistry

Terthiophene derivatives attract interest due to their prospective applications in optoelectronic or sensor devices. Due to their nontoxicity they can be considered as suitable candidates in biological applications. Supramolecular organization of the matter is one of the most interesting topics in contemporary materials science. Amphiphilic chromophores based on substituted terthiophenes are capable of self-assembly into supramolecular architectures. In this work, we aim at simulation of the spectral properties of terthiophene with oligo(ethylene oxide) substituents by the methods of quantum chemistry and molecular dynamics (MD). The potential energy surface (PES) of this molecule was determined by the methods of density functional theory (DFT) for the ground state and time-dependent density-functional theory (TD-DFT) for the excited state. MD simulations in water than revealed the most frequented molecular conformations in both these states. Absorption and fluorescence spectra were determined for all these conformations, including the surrounding water molecules, using TD-DFT and averaged over the conformation space to obtain the final absorption and fluorescence spectrum. The calculated spectra were compared with their experimental counterparts and the differences were discussed in context of the supramolecular structure revealed by confocal microscopy. In spite of its simplicity, this approach provides a satisfactory approximation of absorption and fluorescent spectra of these molecules obtained by computational methods.

Narcissistic self-sorting in Zn(II) porphyrin derived semiconducting nanostructures

The narcissistic self-sorted phenomenon is explicitly attributed to the structural similarities in organic molecules. Although such relevant materials are rarely explored, self-sorted structures from macrocyclic π-conjugated-based p- and n-type organic semiconductors facilitate the increase of exciton dissociation and charge separation in bulk heterojunction solar cells. Herein, we report two extended π-conjugated derivatives consisting of zinc-porphyrin-linked benzothiadiazole acting as an acceptor (PB) and anthracene as a donor (PA). Despite having the same porphyrin π-conjugated core in PA and PB, variations in donor and acceptor moieties make the molecular packing form one-dimensional (1D) self-assembled nanofibers via H- and J-type aggregates. Interestingly, a dissimilar aggregate of PA and PB exists as a mixture (PA + PB), promoting narcissistic self-sorted structures. Electrochemical impedance investigation reveals that the electronic characteristics of self-sorting assemblies are influenced by the difference in electrostatic potentials for PA and PB, resulting in a transitional electrical conductivity of 0.14 S cm-1. Therefore, the design of such materials for the fabrication of effective photovoltaics is promoted by these extraordinary self-sorted behaviors in comparable organic π-conjugated molecules.

Supramolecular Large Nanosheets Assembled at Air/Water Interfaces and in Solution from Amphiphilic Heptagon-Containing Nanographenes

We report the synthesis of a new set of amphiphilic saddle-shaped heptagon-containing polycyclic aromatic hydrocarbons (PAHs) functionalized with tetraethylene glycol chains and their self-assembly into large two-dimensional (2D) polymers. An in-depth analysis of the self-assembly mechanism at the air/water interface has been carried out, and the proposed arrangement models are in good agreement with the molecular dynamics simulations. Quite remarkably, the number and disposition of the tetraethylene glycol chains significantly influence the disposition of the PAHs at the interface and conditionate their packing under pressure. For the three compounds studied, we observed three different behaviors in which the aromatic core is parallel, perpendicular, and tilted with respect to the water surface. We also show that these curved PAHs are able to self-assemble in solution into remarkably large sheets of up to 150 μm2. These results show the relationship, within a family of curved nanographenes, between the monomer configuration and their self-assembly capacity in air/water interfaces and organic-water mixtures.

Living Self-Assembly of Metastable and Stable Two-Dimensional Platelets from a Single Small Molecule

This study reports the design of a donor-acceptor (D-A) molecule with two fluorene units on each side of a benzothiadiazole moiety, which allows multiple intermolecular interactions to compete with one another so as to induce the evolution of the metastable 2D platelets to the stable 2D platelets during the self-assembly of the D-A molecule. Importantly, the living seeded self-assembly of metastable and stable 2D structures with precisely controlled sizes can be conveniently achieved using an appropriate supersaturated level of a solution of the D-A molecule as the seeded growth medium that can temporarily hold the almost-proceeding spontaneous nucleation from competing with the seeded growth. The stable 2D platelets with smaller area sizes exhibit higher sensitivity to gaseous dimethyl sulfide, illustrating that the novel living self-assembly method provides more available functional structures with controlled sizes for practical applications. The key finding of this study is that the new living methodology is separated into two independent processes: the elaborate molecular design for various crystalline structures as seeds and the application of a supersaturated solution with appropriate levels as the growth medium to grow the uniform structures with controlled sizes; this would make convenient and possible the living seeded self-assembly of rich 1D, 2D, and 3D architectures.

Conducting 1D nanostructures from light-stimulated copper-metalated porphyrin-dibenzothiophene

Control over the dimensionality of stimulated organic semiconductors has aroused significant interest in organic electronics; however, the design of such materials still remains to be decided. Herein, we have developed three dibenzothiophene-appended freebase, zinc-metalated and copper-metalated porphyrin derivatives (PFb-DBT, PZn-DBT and PCu-DBT) in which PCu-DBT leads to an anion-binding complex in chloroform upon the application of light, resulting in self-assembled 1D nanostructures with high electrical conductivity. Nevertheless, light-stimulated freebase and zinc-metalated P-DBT undergo protonation and demetalation. Electron microscopic images displayed the anion-binding-assisted 1D nanostructure using weak non-covalent interactions, which promotes enhancement in electrical conductivity among other things, as confirmed by electrochemical impedance spectra. Thus, the generation of well-defined nanostructures with improved electronic characteristics from stimuli-responsive organic dyes suggests the importance of developing various smart materials for efficient field effect transistors and sensors.

Amplification of Molecular Asymmetry during the Hierarchical Self-Assembly of Foldable Azobenzene Dyads into Nanotoroids and Nanotubes

The amplification of molecular asymmetry through self-assembly is a phenomenon that not only comprehends the origin of homochirality in nature but also produces chiroptically active functional materials from molecules with minimal enantiomeric purity. Understanding how molecular asymmetry can be transferred and amplified into higher-order structures in a hierarchical self-assembly system is important but still unexplored. Herein, we present an intriguing example of the amplification of molecular asymmetry in hierarchically self-assembled nanotubes that feature discrete and isolatable toroidal intermediates. The hierarchical self-assembly is initiated via asymmetric intramolecular folding of scissor-shaped azobenzene dyads furnished with chiral side chains. When scalemic mixtures of the enantiomers are dissolved in a non-polar solvent and cooled to 20 °C, single-handed nanotoroids are formed, as confirmed using atomic force microscopy and circular dichroism analyses. A strong majority-rules effect at the nanotoroid level is observed and can be explained by a low mismatch penalty and a high helix-reversal penalty. The single-handed nanotoroids stack upon cooling to 0 °C to exclusively afford their respective single-handed nanotubes. Thus, the same degree of amplification of molecular asymmetry is realized at the nanotube level. The internal packing efficiency of molecules within nanotubes prepared from the pure enantiomers or their scalemic mixtures is likely different, as suggested by the absence of higher-order structure (supercoil) formation in the latter. X-ray diffraction analysis of the anisotropically oriented nanotube films revealed looser molecular packing within the scalemic nanotubes, which clearly reflects the lower enantiomeric purity of their internal chiral side chains.

Photoelectric and Self-Assembly Properties of Tetrasubstituted Pyrene Discotic Derivatives

To investigate the self-assembly behavior of π-conjugated ethynyl-pyrene discotic derivatives, a series of ethynyl-pyrene discotic materials were designed and synthesized by Sonogashira coupling reaction. The π-conjugated structures were characterized by 1H-NMR, IR spectroscopy, and elemental analysis. The optical properties of the discotic materials were examined by UV/Vis spectra and fluorescence emission spectra. The band gap of each compound was calculated by cyclic voltammetry with UV/Vis spectroscopy. Interestingly, the substituted groups in the four symmetrical positions did affect the self-assembly properties of as-resulted nano/micro structures. Under the same conditions, compounds 4a-4d could be self-assembled into different morphologies such as micro-tubes (for 4a), micro-wires (for 4b and 4c), and micro-grain crystals (for 4d). All of the results indicated that the discotic materials have the potential for optoelectronic applications.

The Mechanochemical Synthesis and Activation of Carbon-Rich π-Conjugated Materials

Mechanochemistry uses mechanical force to break, form, and manipulate chemical bonds to achieve functional transformations and syntheses. Over the last years, many innovative applications of mechanochemistry have been developed. Specifically for the synthesis and activation of carbon-rich π-conjugated materials, mechanochemistry offers reaction pathways that either are inaccessible with other stimuli, such as light and heat, or improve reaction yields, energy consumption, and substrate scope. Therefore, this review summarizes the recent advances in this research field combining the viewpoints of polymer and trituration mechanochemistry. The highlighted mechanochemical transformations include π-conjugated materials as optical force probes, the force-induced release of small dye molecules, and the mechanochemical synthesis of polyacetylene, carbon allotropes, and other π-conjugated materials.

Molecular nanoribbon gels

Herein, we show that twisted molecular nanoribbons with as many as 322 atoms in the aromatic core are efficient gelators capable of self-assembling into ordered π-gels with morphologies and sol–gel transitions that vary with the length of the nanoribbon. In addition, the nanoribbon gels show a red fluorescence and also pseudoconductivity values in the same range as current state-of-the-art π-gels.

Herein, we show that twisted molecular nanoribbons with as many as 322 atoms in the aromatic core are efficient gelators capable of self-assembling into ordered π-gels with morphologies and sol–gel transitions that vary with the length of the nanoribbon.

Diels-Alder Cycloaddition with CO, CO2, SO2, or N2 Extrusion: A Powerful Tool for Material Chemistry

Phenyl, naphthyl, polyarylphenyl, coronene, and other aromatic and polyaromatic moieties primarily influence the final materials' properties. One of the synthetic tools used to implement (hetero)aromatic moieties into final structures is Diels-Alder cycloaddition (DAC), typically combined with Scholl dehydrocondensation. Substituted 2-pyranones, 1,1-dioxothiophenes, and, especially, 1,3-cyclopentadienones are valuable substrates for [4 + 2] cycloaddition, leading to multisubstituted derivatives of benzene, naphthalene, and other aromatics. Cycloadditions of dienes can be carried out with extrusion of carbon dioxide, carbon oxide, or sulphur dioxide. When pyranones, dioxothiophenes, or cyclopentadienones and DA cycloaddition are aided with acetylenes including masked ones, conjugated or isolated diynes, or polyynes and arynes, aromatic systems are obtained. This review covers the development and the current state of knowledge regarding thermal DA cycloaddition of dienes mentioned above and dienophiles leading to (hetero)aromatics via CO, CO2, or SO2 extrusion. Particular attention was paid to the role that introduced aromatic moieties play in designing molecular structures with expected properties. Undoubtedly, the DAC variants described in this review, combined with other modern synthetic tools, constitute a convenient and efficient way of obtaining functionalized nanomaterials, continually showing the potential to impact materials sciences and new technologies in the nearest future.

1D alignment of Co(II) metalated porphyrin-napthalimide based self-assembled nanowires for photocatalytic hydrogen evolution

The splitting of water into hydrogen and oxygen under visible light is an emerging phenomenon in green energy technology. Nevertheless, selecting an appropriate photocatalyst is rather significant to enhance hydrogen production on a large scale. In this context, organic photocatalysts have received considerable attention owing to their larger surface area, control in diffusion adsorption, nanostructures and electronic properties. Herein, we have developed five either free base or transition metalated porphyrin-napthalimide based donor-acceptor systems (PN1-PN5) and studied their morphology, electronic properties and catalytic behaviour. Detailed studies suggest that the Co(II) substituent D-A system (PN2) displayed a well-aligned one-dimensional (1D) nanowire with high electrical conductivity promoting remarkable photocatalytic hydrogen production rate (18 mM g^-1 h^-1) when compared to that of porphyrin-based derivatives reported until now. Thus, these results propose to investigate diverse metalated π-conjugated materials as photocatalysts for hydrogen production.

Polymer-Supported-Cobalt-Catalyzed Regioselective Cyclotrimerization of Aryl Alkynes

A convoluted poly(4-vinylpyridine) cobalt(II) (P4VP-CoCl2) system was developed as a stable and reusable heterogeneous catalyst. The local structure near the Co atom was determined on the basis of experimental data and theoretical calculations. This immobilized cobalt catalyst showed high selectivity and catalytic activity in the [2 + 2 + 2] cyclotrimerization of terminal aryl alkynes. With 0.033 mol % P4VP-CoCl2, the regioselective formation of 1,3,5-triarylbenzene was realized without 1,2,4-triarylbenzene formation. Further, a multigram-scale (11 g) reaction proceeded efficiently. In addition, the polymer-supported catalyst was successfully recovered and used three times. X-ray photoelectron spectroscopy analysis of the recovered catalyst suggested that cobalt was in the +2 oxidation state. The 1,3,5-triarylbenzene derivatives were applied to the synthesis of a molecular beam electron resist and a polycyclic aromatic hydrocarbon.

Contorted Heteroannulated Tetraareno[a,d,j,m]coronenes

Fused polycyclic aromatic compounds are interesting materials for organic electronics applications. To fine-tune photophysical or electrochemical properties, either various substituents can be attached or heteroatoms (such as N or S) can be incorporated into the fused aromatic backbone. Coronenes and heterocoronenes are promising compounds in this respect. Up until now, the possibilities for varying the attached fused heteroaromatics at the coronene core were quite limited, and realizing both electron-withdrawing and -donating rings at the same time was very difficult. Here, a series of pyridine, anisole and thiophene annulated tetraareno[a,d,j,m]coronenes has been synthesized by a facile two-step route that is a combination of Suzuki-Miyaura cross-coupling and a following cyclization step, starting from three different diarenoperylene dibromides. The contorted molecular π-planes of the obtained cata-condensed tetraarenocoronenes were analyzed by single-crystal X-ray crystallography, and the photophysical and electrochemical properties were systematically investigated by UV/Vis spectroscopy and cyclovoltammetry.

From spin-labelled fused polyaromatic compounds to magnetically active graphene nanostructures

Molecular design of magnetically active graphene nanoscale structures is an emerging field of research. The key goal of this research is to produce graphene nanoribbons and graphene quantum dots with specified electronic, optical and magnetic properties. The review considers methods for the synthesis of spin-labelled polycyclic aromatic hydrocarbons, which are homologous precursors of graphene nanostructures, and discusses the advances and prospects of the design of magnetically active graphene materials.

The bibliography includes 134 references.

Soft-Matter Nanotubes: A Platform for Diverse Functions and Applications

Self-assembled organic nanotubes made of single or multiple molecular components can be classified into soft-matter nanotubes (SMNTs) by contrast with hard-matter nanotubes, such as carbon and other inorganic nanotubes. To date, diverse self-assembly processes and elaborate template procedures using rationally designed organic molecules have produced suitable tubular architectures with definite dimensions, structural complexity, and hierarchy for expected functions and applications. Herein, we comprehensively discuss every functions and possible applications of a wide range of SMNTs as bulk materials or single components. This Review highlights valuable contributions mainly in the past decade. Fifteen different families of SMNTs are discussed from the viewpoints of chemical, physical, biological, and medical applications, as well as action fields (e.g., interior, wall, exterior, whole structure, and ensemble of nanotubes). Chemical applications of the SMNTs are associated with encapsulating materials and sensors. SMNTs also behave, while sometimes undergoing morphological transformation, as a catalyst, template, liquid crystal, hydro-/organogel, superhydrophobic surface, and micron size engine. Physical functions pertain to ferro-/piezoelectricity and energy migration/storage, leading to the applications to electrodes or supercapacitors, and mechanical reinforcement. Biological functions involve artificial chaperone, transmembrane transport, nanochannels, and channel reactors. Finally, medical functions range over drug delivery, nonviral gene transfer vector, and virus trap.

Hexabenzocoronene Graphitic Nanocoils Appended with Crown Ethers: Supramolecular Chirality Induced by Host-Guest Interaction

We have designed and synthesized two new achiral hexa-peri-hexabenzocoronene (HBC) derivatives, HBC^CE and HBC^TEG-CE , which bear the crown ether as the pendant for the amino acid binding site. The HBC^CE self-assembled into a racemic mixture of P- and M-handed helical nanocoils, however, in the presence of chiral amino acid guests, it formed helical nanocoils with one-handed screw sense. The effects of the concentration, type and configuration of the guests on the induced circular dichroism (ICD) during the co-assembly of HBC^CE with chiral amino acids were also investigated. Additionally, after complete removal of the chiral guests, the optically active nanocoils did not racemize, even in the presence of excess amino acids with the opposite configuration. In contrast, HBC^TEG-CE with a long triethylene glycol (TEG) chain between the crown ether group and the HBC unit did not exhibit ICD during the co-assembly with chiral amino acids.

Behaviour of the XH-*-π and YX-*-π interactions (X, Y = F, Cl, Br and I) in the coronene π-system, as elucidated by QTAIM dual functional analysis with QC calculations

The dynamic and static nature of XH-*-π and YX-*-π in the coronene π-system (π(C24H12)) is elucidated by QTAIM dual functional analysis, where * emphasizes the presence of bond critical points (BCPs) in the interactions. The nature of the interactions is elucidated by analysing the plots of the total electron energy densities H b(r c) versus H b(r c) - V b(r c)/2 [=(ħ 2/8m)∇2 ρ b(r c)] for the interactions at BCPs, where V b(r c) are the potential energy densities at the BCPs. The data for the perturbed structures around the fully optimized structures are employed for the plots in addition to those of the fully optimized structures. The plots are analysed using the polar coordinate of (R, θ) for the data of the fully optimized structures, while those containing the perturbed structures are analysed using (θ p, κ p), where θ p corresponds to the tangent line of each plot and κ p is the curvature. Whereas (R, θ) show the static nature, (θ p, κ p) represent the dynamic nature of the interactions. All interactions in X-H-*-π(C24H12) (X = F, Cl, Br and I) and Y-X-*-π(C24H12) (Y-X = F-F, Cl-Cl, Br-Br, I-I, F-Cl, F-Br and F-I) are classified by pure CS (closed shell) interactions and are characterized as having the vdW nature, except for X-H = F-H and Y-X = F-Cl, F-Br and F-I, which show the typical-HB nature without covalency. The structural features of the complexes are also discussed.

Supramolecular scaffolds enabling the controlled assembly of functional molecular units

To assemble functional molecular units into a desired structure while controlling positional and orientational order is a key technology for the development of high-performance organic materials that exhibit electronic, optoelectronic, biological and even dynamic functions. For this purpose, we cannot rely simply on the inherent self-assembly properties of the target functional molecular units, since it is difficult to predict, based solely on the molecular structure, what structure will be achieved upon assembly. To address this issue, it would be useful to employ molecular building blocks with self-assembly structures that can be clearly predicted and defined, to make target molecular units assemble into a desired structure. To date, various motifs of molecular assemblies, polymers, discrete and/or three-dimensional metal-organic complexes, nanoparticles and metal/metal oxide substrates have been developed to create materials with particular structures and dimensionalities. In this perspective, we define such assembly motifs as "supramolecular scaffolds". The structure of supramolecular scaffolds can be classified in terms of dimensionality, and they range in size from nano- to macroscopic scales. Functional molecular units, when attached to supramolecular scaffolds either covalently or non-covalently, can be assembled into specific structures, thus enabling the exploration of new properties, which cannot be achieved with the target molecular units alone. Through the classification and overview of reported examples, we shed new light on supramolecular scaffolds for the rational design of organic and polymeric materials.

Controlled Self-Assembly of Photofunctional Supramolecular Nanotubes

Designing supramolecular nanotubes (SNTs) with distinct dimensions and properties is highly desirable, yet challenging, since structural control strategies are lacking. Furthermore, relatively complex building blocks are often employed in SNT self-assembly. Here, we demonstrate that symmetric bolaamphiphiles having a hydrophobic core comprised of two perylene diimide moieties connected via a bipyridine linker and bearing polyethylene glycol (PEG) side chains can self-assemble into diverse molecular nanotubes. The structure of the nanotubes can be controlled by assembly conditions (solvent composition and temperature) and a PEG chain length. The resulting nanotubes differ both in diameter and cross section geometry, having widths of 3 nm (triangular-like cross-section), 4 nm (rectangular), and 5 nm (hexagonal). Molecular dynamics simulations provide insights into the stability of the tubular superstructures and their initial stages of self-assembly, revealing a key role of oligomerization via side-by-side aromatic interactions between bis-aromatic cores. Probing electronic and photonic properties of the nanotubes revealed extended electron delocalization and photoinduced charge separation that proceeds via symmetry breaking, a photofunction distinctly different from that of the fibers assembled from the same molecules. A high degree of structural control and insights into SNT self-assembly advance design approaches toward functional organic nanomaterials.

High Energy Density in Azobenzene-based Materials for Photo-Thermal Batteries via Controlled Polymer Architecture and Polymer-Solvent Interactions

Energy densities of ~510 J/g (max: 698 J/g) have been achieved in azobenzene-based syndiotactic-rich poly(methacrylate) polymers. The processing solvent and polymer-solvent interactions are important to achieve morphologically optimal structures for high-energy density materials. This work shows that morphological changes of solid-state syndiotactic polymers, driven by different solvent processings play an important role in controlling the activation energy of Z-E isomerization as well as the shape of the DSC exotherm. Thus, this study shows the crucial role of processing solvents and thin film structure in achieving higher energy densities.

Soluble Graphene Nanoribbons from Planarization of Oligophenylenes

A solution-based chemical synthesis of two graphene nanoribbons with armchair edges is reported. The precursor oligophenylene molecules are synthesized and subjected to oxidative cyclodehydrogenation to afford the target molecules, G-1 and G-2. These molecules have good solubility in organic solvents, and show a large redshift in their absorption edge (up to 185 nm) and emission maximum (up to 125 nm) after planarization. Fibrous structures are formed upon self-assembly of molecules through columnar π-π stacking. Such molecular assemblies may be useful for various applications.

Amphiphilic dendrons with a pyrene functional group at the focal point: synthesis, self-assembly and generation-dependent DNA condensation

Dendritic amphiphiles with a dual-functional pyrene as a fluorescent probe and hydrophobe at the focal point exhibited generation-dependent self-assembly and DNA condensation.

In Situ Electrochemical Synthesis and Deposition of Discotic Hexa-peri-hexabenzocoronene Molecules on Electrodes: Self-Assembled Structure, Redox Properties, and Application for Supercapacitor

Discotic hexa-peri-hexabenzocoronene (HBC) molecules are synthesized by electrochemical cyclodehydrogenation reaction and in situ self-assembled to π-electronic, discrete nanofibular objects with an average diameter about 70 nm, which are deposited directly onto the electrode. The nanofibers consist of columnar arrays of the π-stacked HBC molecules and the intercolumnar distance is determined to be 1.19 nm by X-ray diffraction, which corresponds well to the distance of 1.1 nm observed by high-resolution transmitting electron microscopy. The diameter of the molecular columns matches the size of the discotic HBC molecule indicating face-to-face π-stacking of HBC units in the column. The HBC nanofibers on electrode are redox active, and the nanosized columnar structures provide a huge surface area, which is a great benefit for the charging/discharging process, delivering excellent capacitance of 155 F g(-1) . The described electrochemical deposition method shows great advantage for self-assembling the family of insoluble and structurally designable graphene-like nano materials, which constitutes an important step toward molecular electronics.

Translation of the assembling trajectory by preorganisation: a study of the magnetic properties of 1D polymeric unpaired electrons immobilised on a discrete nanoscopic scaffold

A nitronyl nitroxide (NN)-appended hexabenzocoronene (HBC(NN)), when allowed to coassemble with bis(hexafluoroacetylacetonato)cobalt(II), forms a coaxial nanotubular architecture featuring NN-Co(II) coordinated copolymer chains immobilised on the outer and inner nanotube surfaces. Upon lowering the temperature, this nanotube has enhanced magnetic susceptibility below 10 K.

Charge carrier mobility in organic molecular materials probed by electromagnetic waves

Charge carrier mobility is an essential parameter providing control over the performance of semiconductor devices fabricated using a variety of organic molecular materials. Recent design strategies toward molecular materials have been directed at the substitution of amorphous silicon-based semiconductors; accordingly, numerous measurement techniques have been designed and developed to probe the electronic conducting nature of organic materials bearing extremely wide structural variations in comparison with inorganic and/or metal-oxide semiconductor materials. The present perspective highlights the evaluation methodologies of charge carrier mobility in organic materials, as well as the merits and demerits of techniques examining the feasibility of organic molecules, crystals, and supramolecular assemblies in semiconductor applications. Beyond the simple substitution of amorphous silicon, we have attempted to address in this perspective the systematic use of measurement techniques for future development of organic molecular semiconductors.

Alkyl-π engineering in state control toward versatile optoelectronic soft materials

Organic π-conjugated molecules with extremely rich and tailorable electronic and optical properties are frequently utilized for the fabrication of optoelectronic devices. To achieve high solubility for facile solution processing and desirable softness for flexible device fabrication, the rigid π units were in most cases attached by alkyl chains through chemical modification. Considerable numbers of alkylated-π molecular systems with versatile applications have been reported. However, a profound understanding of the molecular state control through proper alkyl chain substitution is still highly demanded because effective applications of these molecules are closely related to their physical states. To explore the underlying rule, we review a large number of alkylated-π molecules with emphasis on the interplay of van der Waals interactions (vdW) of the alkyl chains and π-π interactions of the π moieties. Based on our comprehensive investigations of the two interactions' impacts on the physical states of the molecules, a clear guidance for state control by alkyl-π engineering is proposed. Specifically, either with proper alkyl chain substitution or favorable additives, the vdW and π-π interactions can be adjusted, resulting in modulation of the physical states and optoelectronic properties of the molecules. We believe the strategy summarized here will significantly benefit the alkyl-π chemistry toward wide-spread applications in optoelectronic devices.

Tetrabenzocircumpyrene: a nanographene fragment with an embedded peripentacene core

A new disc-shaped highly symmetric C₅₄H₂₀ nanographene fragment, tetrabenzocircumpyrene, has been synthesized and characterized by scanning tunnelling microscopy, demonstrating the potential of this technique for identifying highly insoluble graphenic molecules.