Calcium-43 Chemical Shift Tensors as Probes of Calcium Binding Environments. Insight into the Structure of the Vaterite CaCO3 Polymorph by 43Ca Solid-State NMR Spectroscopy

Hidden chemical order in disordered Ba7Nb4MoO20 revealed by resonant X-ray diffraction and solid-state NMR

The chemical order and disorder of solids have a decisive influence on the material properties. There are numerous materials exhibiting chemical order/disorder of atoms with similar X-ray atomic scattering factors and similar neutron scattering lengths. It is difficult to investigate such order/disorder hidden in the data obtained from conventional diffraction methods. Herein, we quantitatively determined the Mo/Nb order in the high ion conductor Ba₇Nb₄MoO₂₀ by a technique combining resonant X-ray diffraction, solid-state nuclear magnetic resonance (NMR) and first-principle calculations. NMR provided direct evidence that Mo atoms occupy only the M2 site near the intrinsically oxygen-deficient ion-conducting layer. Resonant X-ray diffraction determined the occupancy factors of Mo atoms at the M2 and other sites to be 0.50 and 0.00, respectively. These findings provide a basis for the development of ion conductors. This combined technique would open a new avenue for in-depth investigation of the hidden chemical order/disorder in materials.

Acceleration of indirect detection 195Pt solid-state NMR experiments by sideband selective excitation or alternative indirect sampling schemes

The measurement of the of chemical shift (CS) tensors via solid-state NMR (ssNMR) spectroscopy has proven to be a powerful probe of structure for organic molecules, biomolecules, and inorganic materials. However, when measuring the NMR spectra of heavy spin-1/2 isotopes the chemical shift anisotropy (CSA) is commonly on the order of thousands of parts per million, which makes acquisition of NMR spectra difficult due to the low NMR sensitivity imposed by the breadth of the signals and challenges in uniformly exciting the NMR spectrum. We have recently shown that complete ¹⁹⁵Pt NMR spectra could be rapidly measured by using ¹⁹⁵Pt saturation or excitation selective long pulses (SLP) with multiple rotor-cycle durations and RF fields less than 50 kHz into ¹H{¹⁹⁵Pt} or ¹H-³¹P{¹⁹⁵Pt} PE S-RESPDOR, TONE D-HMQC-4, J-resolved, and J-HMQC pulse sequences. The SLP only provide signal or dephasing when they are applied on resonance with a spinning sideband. The magic angle spinning ¹⁹⁵Pt NMR spectrum is reconstructed in the sideband selective NMR experiments by acquiring 1D NMR spectra at variable ¹⁹⁵Pt pulse offsets. In this work, we present a detailed investigation of the specific pulse conditions required for the ideal performance of sideband selective experiments. Sideband selective experiments are shown to be able to accurately reproduce MAS NMR spectra with minimal distortions of relative sideband intensities. It is also demonstrated that a ¹⁹⁵Pt NMR spectrum indirectly detected with HMQC can be rapidly obtained by acquiring a single rotor cycle of indirect dimension evolution points. We dub this method One Rotor Cycle of Acquisition (ORCA) HMQC. Sideband selective experiments and ORCA HMQC experiments are shown to provide a one order of magnitude improvement in experiment times as compared to conventional wideline HMQC experiments.

13C, 25Mg, and 43Ca Solid-State NMR for the Purpose of Dolomitic Marbles Provenance Elucidation

The study of the provenance of dolomitic marble artefacts has become relevant since it was discovered that quarries of this marble other than that of Cape-Vathy located on the island of Thasos have been exploited since Antiquity. To improve our knowledge about the provenance of materials and the extent of their dispersion, multiple archaeometric studies were performed in the past including isotope analyses, petrography, cathodoluminescence, and elemental analyses. In the present work, solid-state nuclear magnetic resonance (NMR) spectroscopy has been added to this panel of techniques. NMR allows the characterization of the material at a molecular level by looking at different nuclei: carbon, magnesium, and calcium. Statistical analysis of the data collected on both quarry samples and archaeologic items was also implemented and clearly demonstrates the efficiency of a holistic approach for provenance elucidation. Finally, the first ²⁵Mg NMR tests have shown the potential of this technique to discriminate between dolomitic marbles of different provenance. The results are discussed in terms of their historical meaning and illustrate the exploitation of sources of dolomitic marbles other than the Greek Thasos source.

A 43 Ca nuclear magnetic resonance perspective on octacalcium phosphate and its hybrid derivatives

⁴³ Ca nuclear magnetic resonance (NMR) spectroscopy has been extensively applied to the detailed study of octacalcium phosphate (OCP), Ca₈ (HPO₄ )₂ (PO₄ )₄ .5H₂ O, and hybrid derivatives involving intercalated metabolic acids (viz., citrate, succinate, formate, and adipate). Such phases are of importance in the development of a better understanding of bone structure. High-resolution ⁴³ Ca magic angle spinning (MAS) experiments, including double-rotation (DOR) ⁴³ Ca NMR, as well as ⁴³ Ca{¹ H} rotational echo DOR (REDOR) and ³¹ P{⁴³ Ca} REAPDOR NMR spectra, were recorded on a ⁴³ Ca-labeled OCP phase at very high magnetic field (20 T), and complemented by ab initio calculations of NMR parameters using the Gauge-Including Projector Augmented Wave-density functional theory (GIPAW-DFT) method. This enabled a partial assignment of the eight inequivalent Ca²⁺ sites of OCP. Natural-abundance ⁴³ Ca MAS NMR spectra were then recorded for the hybrid organic-inorganic derivatives, revealing changes in the ⁴³ Ca lineshape. In the case of the citrate derivative, these could be interpreted on the basis of computational models of the structure. Overall, this study highlights the advantages of combining high-resolution ⁴³ Ca NMR experiments and computational modeling for studying complex hybrid biomaterials.

Recent progress in solid-state nuclear magnetic resonance of half-integer spin low-γ quadrupolar nuclei applied to inorganic materials

An overview is presented of recent progress in the solid-state nuclear magnetic resonance (NMR) observation of low-γ nuclei, with a focus on applications to inorganic materials. The technological and methodological advances in the last 20 years, which have underpinned the increased accessibility of low-γ nuclei for study by solid-state NMR techniques, are summarised, including improvements in hardware, pulse sequences and associated computational methods (e.g., first principles calculations and spectral simulation). Some of the key initial observations from inorganic materials of these nuclei are highlighted along with some recent (most within the last 10 years) illustrations of their application to such materials. A summary of other recent reviews of the study of low-γ nuclei by solid-state NMR is provided so that a comprehensive understanding of what has been achieved to date is available.

The atomic structure and dynamics at the CaCO3 vaterite-water interface: A classical molecular dynamics study

Classical molecular and lattice dynamics were applied to explore the structure and dynamics of water on different surfaces of vaterite, the least abundant calcium carbonate polymorph. Surfaces were generated starting from the three possible structural models for vaterite (monoclinic, hexagonal/trigonal, and triclinic) and pre-screened using their surface energies in an implicit solvent. Surfaces with energies lower than 0.55 J/m² were then run in explicit water. The majority of these surfaces dissolve in less than 100 ns, highlighting the low stability of this phase in abiotic environments. Three stable surfaces were identified; they exhibited only minor structural changes when in contact with explicit water and did not show any tendency to dissolve during 1 µs molecular dynamics simulations. The computed water density profiles show that all these surfaces have two distinct hydration layers. The water residence time at the various calcium sites was computed to be within 0.7 and 20.5 ns, which suggests that specific Ca ions will be more readily available to bind with organic molecules present in solution. This analysis is a step forward in understanding the structure of this complex mineral and its role in biomineralization, as it provides a solid theoretical background to explore its surface chemistry. In particular, this study provides realistic surface models and predicts the effect of water exchange at the surface active sites on the adsorption of other molecules.

A Supramolecular View on the Cooperative Role of Brønsted and Lewis Acid Sites in Zeolites for Methanol Conversion

A systematic molecular level and spectroscopic investigation is presented to show the cooperative role of Brønsted acid and Lewis acid sites in zeolites for the conversion of methanol. Extra-framework alkaline-earth metal containing species and aluminum species decrease the number of Brønsted acid sites, as protonated metal clusters are formed. A combined experimental and theoretical effort shows that postsynthetically modified ZSM-5 zeolites, by incorporation of extra-framework alkaline-earth metals or by demetalation with dealuminating agents, contain both mononuclear [MOH]⁺ and double protonated binuclear metal clusters [M(μ-OH)₂M]²⁺ (M = Mg, Ca, Sr, Ba, and HOAl). The metal in the extra-framework clusters has a Lewis acid character, which is confirmed experimentally and theoretically by IR spectra of adsorbed pyridine. The strength of the Lewis acid sites (Mg > Ca > Sr > Ba) was characterized by a blue shift of characteristic IR peaks, thus offering a tool to sample Lewis acidity experimentally. The incorporation of extra-framework Lewis acid sites has a substantial influence on the reactivity of propene and benzene methylations. Alkaline-earth Lewis acid sites yield increased benzene methylation barriers and destabilization of typical aromatic intermediates, whereas propene methylation routes are less affected. The effect on the catalytic function is especially induced by the double protonated binuclear species. Overall, the extra-framework metal clusters have a dual effect on the catalytic function. By reducing the number of Brønsted acid sites and suppressing typical catalytic reactions in which aromatics are involved, an optimal propene selectivity and increased lifetime for methanol conversion over zeolites is obtained. The combined experimental and theoretical approach gives a unique insight into the nature of the supramolecular zeolite catalyst for methanol conversion which can be meticulously tuned by subtle interplay of Brønsted and Lewis acid sites.

Synthesis Methods and Favorable Conditions for Spherical Vaterite Precipitation: A Review

Vaterite is the least thermodynamically stable anhydrous calcium carbonate polymorph. Its existence is very rare in nature, e.g., in some rock formations or as a component of biominerals produced by some fishes, crustaceans, or birds. Synthetic vaterite particles are proposed as carriers of active substances in medicines, additives in cosmetic preparations as well as adsorbents. Also, their utilization as a pump for microfluidic flow is also tested. In particular, vaterite particles produced as polycrystalline spheres have large potential for application. Various methods are proposed to precipitate vaterite particles, including the conventional solution-solution synthesis, gas-liquid method as well as special routes. Precipitation conditions should be carefully selected to obtain a high concentration of vaterite in all these methods. In this review, classical and new methods used for vaterite precipitation are presented. Furthermore, the key parameters affecting the formation of spherical vaterite are discussed.

A new NMR crystallographic approach to reveal the calcium local structure of atorvastatin calcium

We combine experimental and computational determination of ⁴³Ca solid-state NMR parameters (chemical shift tensors, quadrupolar coupling tensors, and Euler angles) to constrain the structure of the local calcium–ligand coordination environment.

Probing Calcium-Based Metal-Organic Frameworks via Natural Abundance 43 Ca Solid-State NMR Spectroscopy

Calcium-based metal-organic frameworks (MOFs) are of high importance due to their low cost and bio-compatible metal centers. Understanding the local environment of calcium in these materials is critical for unraveling the origins of specific MOF properties. ⁴³ Ca solid-state NMR spectroscopy is one of the very few techniques that can directly characterize calcium metal centers, however, the ⁴³ Ca nucleus is a very challenging target for solid-state NMR spectroscopy due to its extremely low natural abundance and resonant frequency. In this work, natural abundance ⁴³ Ca solid-state NMR spectroscopy, at a high magnetic field of 21.1 T, has been employed to characterize several calcium-based MOFs. We demonstrate that ⁴³ Ca NMR spectra and quantum chemical calculations can probe the local structure of calcium metal centers within MOFs, investigate the presence of guests, and monitor phase changes.

Preparation-Dependent Composition and O/F Ordering in NbO2F and TaO2F

Through an analysis combining powder XRD, TGA, and ¹⁹F and ¹H solid-state NMR, it is confirmed for NbO₂F and shown for TaO₂F that both contain hydroxyl defects and metal vacancies when prepared by aqueous solution synthesis. The formulations M_1-x□_xO_2-5x(OH,F)_1+5x of both the samples are determined. The effects of the usually applied thermal treatments are examined. Obtaining pure NbO₂F and TaO₂F from these samples, that is, fully removing metal vacancies and hydroxide, while avoiding the formation of M₂O₅, is not that easy. Since thermal treatments result in dehydroxylation and defluorination, it requires, at least, a larger amount of fluorine than metal initially, which may not be the case. We also confirm that the solid-state synthesis is an efficient method to avoid metal vacancies and hydroxyl defects in NbO₂F and then apply it to the synthesis of TaO₂F. The local structure of NbO₂F and TaO₂F is poorly described by an ideal cubic ReO₃-type model with O and F randomly distributed over the available anion sites. Since O/F ordering was previously highlighted, NbO₂F and TaO₂F cubic 3 × 3 × 3 supercells featuring -M-O-M-O-M-F- chains along ⟨100⟩ have been built and geometry optimized. These optimized supercells lead to more realistic structures than the previously proposed models, that is, really disordered structures with angularly and radially distorted MX₆ octahedra as expected in disordered compounds. Moreover, the structural modeling of NbO₂F and TaO₂F by these geometry-optimized supercells is supported by the computed ¹⁹F and ⁹³Nb NMR parameters, which give very good agreement with the experimental ones.

Interfacial Ca2+ environments in nanocrystalline apatites revealed by dynamic nuclear polarization enhanced 43Ca NMR spectroscopy

The interfaces within bones, teeth and other hybrid biomaterials are of paramount importance but remain particularly difficult to characterize at the molecular level because both sensitive and selective techniques are mandatory. Here, it is demonstrated that unprecedented insights into calcium environments, for example the differentiation of surface and core species of hydroxyapatite nanoparticles, can be obtained using solid-state NMR, when combined with dynamic nuclear polarization. Although calcium represents an ideal NMR target here (and de facto for a large variety of calcium-derived materials), its stable NMR-active isotope, calcium-43, is a highly unreceptive probe. Using the sensitivity gains from dynamic nuclear polarization, not only could calcium-43 NMR spectra be obtained easily, but natural isotopic abundance 2D correlation experiments could be recorded for calcium-43 in short experimental time. This opens perspectives for the detailed study of interfaces in nanostructured materials of the highest biological interest as well as calcium-based nanosystems in general.

Intraspecific Differences in Biogeochemical Responses to Thermal Change in the Coccolithophore Emiliania huxleyi

The species concept in marine phytoplankton is defined based on genomic, morphological, and functional properties. Reports of intraspecific diversity are widespread across major phytoplankton groups but the impacts of this variation on ecological and biogeochemical processes are often overlooked. Intraspecific diversity is well known within coccolithophores, which play an important role in the marine carbon cycle via production of particulate inorganic carbon. In this study, we investigated strain-specific responses to temperature in terms of morphology, carbon production, and carbonate mineralogy using a combination of microscopy, elemental analysis, flow cytometry, and nuclear magnetic resonance. Two strains of the cosmopolitan coccolithophore E. huxleyi isolated from different regions (subtropical, CCMP371; temperate, CCMP3266) were cultured under a range of temperature conditions (10°C, 15°C, and 20°C) using batch cultures and sampled during both exponential and stationary growth. Results for both strains showed that growth rates decreased at lower temperatures while coccosphere size increased. Between 15°C and 20°C, both strains produced similar amounts of total carbon, but differed in allocation of that carbon between particulate inorganic carbon (PIC) and particulate organic carbon (POC), though temperature effects were not detected. Between 10°C and 20°C, temperature effects on daily production of PIC and POC, as well as the cellular quota of POC were detected in CCMP3266. Strain-specific differences in coccolith shedding rates were found during exponential growth. In addition, daily shedding rates were negatively related to temperature in CCMP371 but not in CCMP3266. Despite differences in rates of particulate inorganic carbon production, both strains were found to produce coccoliths composed entirely of pure calcite, as established by solid-state ¹³C and ⁴³Ca NMR and X-ray diffraction measurements. These results highlight the limitations of the species concept and the need for a trait-based system to better quantify diversity within marine phytoplankton communities.

Hydrogen bonding induced distortion of CO3 units and kinetic stabilization of amorphous calcium carbonate: results from 2D 13C NMR spectroscopy

The structure of amorphous calcium carbonate consists of a uniform spatial disposition of H₂O molecules around the CO₃ units, forming a hydrogen-bonded amorphous network that is stabilized against crystallization by steric frustration.

Calcium environment in silicate and aluminosilicate glasses probed by ⁴³Ca MQMAS NMR experiments and MD-GIPAW calculations

⁴³Ca MQMAS NMR spectra of three silica-based glasses in which Ca²⁺ ions play different structural roles have been collected and processed in order to extract the underlying NMR parameter distributions. The NMR parameters have been interpreted with the help of molecular dynamics simulations and DFT-GIPAW calculations. This synergetic experimental-computational approach has allowed us to investigate the Ca environment, to estimate Ca coordination numbers from MD-derived models, and to push further the discussion about ⁴³Ca NMR sensitivity to the first and second coordination spheres: ⁴³Ca δiso and Ca-O distance can be successfully correlated as a function of Ca coordination number.

On the crystal structure of the vaterite polymorph of CaCO3: a calcium-43 solid-state NMR and computational assessment

The vaterite polymorph of CaCO3 has puzzled crystallographers for decades in part due to difficulties in obtaining single crystals. The multiple proposed structures for the vaterite polymorph of CaCO3 are assessed using a combined (43)Ca solid-state nuclear magnetic resonance (SSNMR) spectroscopic and computational approach. A combination of improved experimental and computational methods, along with a calibrated chemical shift scale and (43)Ca nuclear quadrupole moment, allow for improved insights relative to our earlier work (Bryce et al., J. Am. Chem. Soc. 2008, 130, 9282). Here, we synthesize a (43)Ca isotopically-enriched sample of vaterite and perform high-resolution quadrupolar SSNMR experiments including magic-angle spinning (MAS), double-rotation (DOR), and multiple-quantum (MQ) MAS experiments at magnetic field strengths of 9.4 and 21.1T. We identify one crystallographically unique Ca(2+) site in vaterite with a slight distribution in both chemical shifts and quadrupolar parameters. Both the experimental (43)Ca electric field gradient tensor and the isotropic chemical shift for vaterite are compared to those calculated with the gauge-including projector-augmented-wave (GIPAW) DFT method in an attempt to identify the model that best represents the crystal structure of vaterite. Simulations of (43)Ca DOR and MAS NMR spectra based on the NMR parameters computed for a total of 18 structural models for vaterite allow us to distinguish between these models. Among these 18, the P3221 and C2 structures provide simulated spectra and diffractograms in best agreement with all experimental data.

Quantitative identification of metastable magnesium carbonate minerals by solid-state 13C NMR spectroscopy

In the conversion of CO2 to mineral carbonates for the permanent geosequestration of CO2, there are multiple magnesium carbonate phases that are potential reaction products. Solid-state (13)C NMR is demonstrated as an effective tool for distinguishing magnesium carbonate phases and quantitatively characterizing magnesium carbonate mixtures. Several of these mineral phases include magnesite, hydromagnesite, dypingite, and nesquehonite, which differ in composition by the number of waters of hydration or the number of crystallographic hydroxyl groups. These carbonates often form in mixtures with nearly overlapping (13)C NMR resonances which makes their identification and analysis difficult. In this study, these phases have been investigated with solid-state (13)C NMR spectroscopy, including both static and magic-angle spinning (MAS) experiments. Static spectra yield chemical shift anisotropy (CSA) lineshapes that are indicative of the site-symmetry variations of the carbon environments. MAS spectra yield isotropic chemical shifts for each crystallographically inequivalent carbon and spin-lattice relaxation times, T1, yield characteristic information that assist in species discrimination. These detailed parameters, and the combination of static and MAS analyses, can aid investigations of mixed carbonates by (13)C NMR.

NMR characterization of hydrocarbon adsorption on calcite surfaces: a first principles study

The electronic and coordination environment of minerals surfaces, as calcite, are very difficult to characterize experimentally. This is mainly due to the fact that there are relatively few spectroscopic techniques able to detect Ca(2+). Since calcite is a major constituent of sedimentary rocks in oil reservoir, a more detailed characterization of the interaction between hydrocarbon molecules and mineral surfaces is highly desirable. Here we perform a first principles study on the adsorption of hydrocarbon molecules on calcite surface (CaCO3 (101¯4)). The simulations were based on Density Functional Theory with Solid State Nuclear Magnetic Resonance (SS-NMR) calculations. The Gauge-Including Projector Augmented Wave method was used to compute mainly SS-NMR parameters for (43)Ca, (13)C, and (17)O in calcite surface. It was possible to assign the peaks in the theoretical NMR spectra for all structures studied. Besides showing different chemical shifts for atoms located on different environments (bulk and surface) for calcite, the results also display changes on the chemical shift, mainly for Ca sites, when the hydrocarbon molecules are present. Even though the interaction of the benzene molecule with the calcite surface is weak, there is a clearly distinguishable displacement of the signal of the Ca sites over which the hydrocarbon molecule is located. A similar effect is also observed for hexane adsorption. Through NMR spectroscopy, we show that aromatic and alkane hydrocarbon molecules adsorbed on carbonate surfaces can be differentiated.

NMR crystallography: Applications to inorganic materials

Current developments of NMR crystallography as well as some recent applications to diamagnetic inorganic solids are presented. First, we illustrate how solid-state NMR data can be used in combination with diffraction data for the determination of the periodic part of the crystal structures, from the space group selection, to the structure determination over the refinement and validation processes. As ss-NMR, contrary to diffraction (powder and single-crystal), is not restricted to periodic boundary conditions, ss-NMR data can be used to further complete the structural description of materials, including studies of local order/disorder, etc. This illustrated through examples, which are shown and discussed in the second part of this review.

23Na magic-angle spinning and double-rotation NMR study of solid forms of sodium valproate

Sodium valproate is a pharmaceutical with applications in the treatment of epilepsy, bipolar disorder, and other ailments. Sodium valproate can exist in many hydrated and acid-stabilized forms in the solid state, and it can be difficult to obtain precise structural information about many of these. Here, we present a 13C and 23Na solid-state NMR study of several forms of sodium valproate, only one of which has been previously structurally characterized by single-crystal X-ray diffraction. 23Na magic-angle spinning (MAS), double-rotation (DOR), and multiple-quantum magic-angle spinning (MQMAS) NMR spectra are shown to provide useful information on the number of molecules in the asymmetric unit, the local coordination geometry of the sodium cations, and the presence of amorphous phases. Two previously identified forms are shown to be highly similar, or identical, according to the 23Na NMR data. The utility of carrying out both DOR and MQMAS NMR experiments to identify all crystallographically unique sites is demonstrated. 13C cross-polarization MAS NMR spectra also provide complementary information on the number of molecules in the asymmetric unit and the crystallinity of the sample.

Vaterite crystals contain two interspersed crystal structures

Calcite, aragonite, and vaterite are the three anhydrous polymorphs of calcium carbonate, in order of decreasing thermodynamic stability. Although vaterite is not commonly found in geological settings, it is an important precursor in several carbonate-forming systems and can be found in biological settings. Because of difficulties in obtaining large, pure, single crystals, the crystal structure of vaterite has been elusive for almost a century. Using aberration-corrected high-resolution transmission electron microscopy, we found that vaterite is actually composed of at least two different crystallographic structures that coexist within a pseudo-single crystal. The major structure exhibits hexagonal symmetry; the minor structure, existing as nanodomains within the major matrix, is still unknown.

Calcium-43 NMR studies of polymorphic transition of calcite to aragonite

Phase transformation between calcite and aragonite is an important issue in biomineralization. To shed more light on the mechanism of this process at the molecular level, we employ solid-state (43)Ca NMR to study the phase transformation from calcite to aragonite as regulated by magnesium ions, with (43)Ca enrichment at a level of 6%. Using the gas diffusion approach, the phase of Mg-calcite is formed initially and the system subsequently transforms to aragonite as the reaction time proceeds. Our (43)Ca solid-state NMR data support the dissolution-recrystallization mechanism for the calcite to aragonite transition. We find that the (43)Ca NMR parameters of Mg-calcite are very similar to those of pure calcite. Under the high-resolution condition provided by magic-angle spinning at 4 kHz, we can monitor the variation of the (43)Ca NMR parameters of the aragonite signals for the samples obtained at different reaction times. Our data suggest that in the presence of a significant amount of Mg(2+) ions, aragonite is the most stable polymorph of calcium carbonate. The initial precipitated crystallites of aragonite have spine-like morphology, for which the (43)Ca spin-lattice relaxation data indicate that the ions in the lattice have considerable motional dynamics. As the crystallinity of aragonite improves further, the (43)Ca T(1) parameter of the aragonite phase changes considerably and becomes very similar to that obtained for pure aragonite. For the first time, the difference in crystal morphologies and crystallinity of the aragonite phase has been traced down to the subtle difference in the motional dynamics at the molecular level.

Ab Initio structure determination of vaterite by automated electron diffraction

"This is a mineral about which there has been much discussion" is a typical statement about vaterite in older standard textbooks of inorganic chemistry. This polymorph of CaCO(3) was first mentioned by H. Vater in 1897, plays key roles in weathering and biomineralization processes, but occurs only in the form of nanosized crystals, unsuitable for structure determination. Its structure could now be solved by automated electron diffraction tomography from 50 nm sized nanocrystals.

Intra- and inter-molecular interactions in salicylic acid — Theoretical calculations of 17O and 1H chemical shielding tensors and QTAIM analysis

A density functional theory (DFT) study was performed to examine intra- and inter-molecular hydrogen bond (HB) properties in crystalline salicylic acid (SA). BLYP, B3LYP, and M06 functionals with 6–311++G** basis set were employed to calculate NMR chemical shielding isotropy (σiso) and anisotropy (Δσ) at the sites of the 17O and 1H nuclei of SA. From this study, it appears that the intra- and inter-molecular O–H···O as well as C–H···O HBs around the SA molecule in the crystal lattice have a major influence on the chemical shielding tensors and more specifically on the carbonyl 17O isotropy value. The quantum theory of atoms in molecules (QTAIM) analysis was also employed to elucidate the interaction characteristics in SA H-bonded network. Based on QTAIM results, a partial covalent character is attributed to the intra- and inter-molecular O–H···O HBs in SA.

A 43Ca and 13C NMR study of the chemical interaction between poly(ethylene-vinyl acetate) and white cement during hydration

(43)Ca and (13)C NMR methods were used to study the chemical interaction of poly(ethylene-vinyl acetate) (PEVAc) admixture in commercial-grade white cement. From (43)Ca NMR it is shown both that PEVAc induces modest changes in the hydrated cement structure, and that hydrated commercial cement is significantly more complex than models that have been used for its structure in past work. The (13)C NMR results show that the PEVAc hydrolysis occurs early in the cement hydration acceleration period, with a rate well-fit by an exponential decay using a time constant of 6±1 days.

A multinuclear solid-state magnetic resonance and GIPAW DFT study of anhydrous calcium chloride and its hydrates

The group 2 metal halides and corresponding metal halide hydrates serve as useful model systems for understanding the relationship between the electric field gradient (EFG) and chemical shift (CS) tensors at the halogen nuclei and the local molecular and electronic structure. Here, we present a 35/37Cl and 43Ca solid-state nuclear magnetic resonance (SSNMR) study of CaCl2. The 35Cl nuclear quadrupole coupling constant, 8.82(8) MHz, and the isotropic chlorine CS, 105(8) ppm (with respect to dilute NaCl(aq)), are different from the values reported previously for this compound, as well as those reported for CaCl2·2H2O. Chlorine-35 SSNMR spectra are also presented for CaCl2·6H2O, and when taken in concert, the SSNMR observations for CaCl2, CaCl2·2H2O, and CaCl2·6H2O clearly demonstrate the sensitivity of the chlorine EFG and CS tensors to the local symmetry and to changes in the hydration state. For example, the value of δiso decreases with increasing hydration. Gauge-including projector-augmented wave (GIPAW) density functional theory (DFT) calculations are used to substantiate the experimental SSNMR findings, to rule out the presence of other hydrates in our samples, to refine the hydrogen positions in CaCl2·2H2O, and to explore the isostructural relationship between CaCl2 and CaBr2. Finally, the 43Ca CS tensor span is measured to be 31(5) ppm for anhydrous CaCl2, which represents only the fifth CS tensor span measurement for calcium.

The PAW/GIPAW approach for computing NMR parameters: a new dimension added to NMR study of solids

In 2001, Mauri and Pickard introduced the gauge including projected augmented wave (GIPAW) method that enabled for the first time the calculation of all-electron NMR parameters in solids, i.e. accounting for periodic boundary conditions. The GIPAW method roots in the plane wave pseudopotential formalism of the density functional theory (DFT), and avoids the use of the cluster approximation. This method has undoubtedly revitalized the interest in quantum chemical calculations in the solid-state NMR community. It has quickly evolved and improved so that the calculation of the key components of NMR interactions, namely the shielding and electric field gradient tensors, has now become a routine for most of the common nuclei studied in NMR. Availability of reliable implementations in several software packages (CASTEP, Quantum Espresso, PARATEC) make its usage more and more increasingly popular, maybe indispensable in near future for all material NMR studies. The majority of nuclei of the periodic table have already been investigated by GIPAW, and because of its high accuracy it is quickly becoming an essential tool for interpreting and understanding experimental NMR spectra, providing reliable assignments of the observed resonances to crystallographic sites or enabling a priori prediction of NMR data. The continuous increase of computing power makes ever larger (and thus more realistic) systems amenable to first-principles analysis. In the near future perspectives, as the incorporation of dynamical effects and/or disorder are still at their early developments, these areas will certainly be the prime target.

Natural-abundance 43Ca solid-state NMR spectroscopy of bone

Structural information about the coordination environment of calcium present in bone is highly valuable in understanding the role of calcium in bone formation, biomineralization, and bone diseases like osteoporosis. While a high-resolution structural study on bone has been considered to be extremely challenging, NMR studies on model compounds and bone minerals have provided valuable insight into the structure of bone. Particularly, the recent demonstration of (43)Ca solid-state NMR experiments on model compounds is an important advance in this field. However, application of (43)Ca NMR is hampered due to the low natural-abundance and poor sensitivity of (43)Ca. In this study, we report the first demonstration of natural-abundance (43)Ca magic angle spinning (MAS) NMR experiments on bone, using powdered bovine cortical bone samples. (43)Ca NMR spectra of bovine cortical bone are analyzed by comparing to the natural-abundance (43)Ca NMR spectra of model compounds including hydroxyapatite and carbonated apatite. While (43)Ca NMR spectra of hydroxyapatite and carbonated apatite are very similar, they significantly differ from those of cortical bone. Raman spectroscopy shows that the calcium environment in bone is more similar to carbonated apatite than hydroxyapatite. A close analysis of (43)Ca NMR spectra reveals that the chemical shift frequencies of cortical bone and 10% carbonated apatite are similar but the quadrupole coupling constant of cortical bone is larger than that measured for model compounds. In addition, our results suggest that an increase in the carbonate concentration decreases the observed (43)Ca chemical shift frequency. A comparison of experimentally obtained (43)Ca MAS spectra with simulations reveal a 3:4 mol ratio of Ca-I/Ca-II sites in carbonated apatite and a 2.3:3 mol ratio for hydroxyapatite. 2D triple-quantum (43)Ca MAS experiments performed on a mixture of carbonated apatite and the bone protein osteocalcin reveal the presence of protein-bound and free calcium sites, which is in agreement with a model developed from X-ray crystal structure of the protein.

New perspectives in the PAW/GIPAW approach: J(P-O-Si) coupling constants, antisymmetric parts of shift tensors and NQR predictions

In 2001, Pickard and Mauri implemented the gauge including projected augmented wave (GIPAW) protocol for first-principles calculations of NMR parameters using periodic boundary conditions (chemical shift anisotropy and electric field gradient tensors). In this paper, three potentially interesting perspectives in connection with PAW/GIPAW in solid-state NMR and pure nuclear quadrupole resonance (NQR) are presented: (i) the calculation of J coupling tensors in inorganic solids; (ii) the calculation of the antisymmetric part of chemical shift tensors and (iii) the prediction of (14)N and (35)Cl pure NQR resonances including dynamics. We believe that these topics should open new insights in the combination of GIPAW, NMR/NQR crystallography, temperature effects and dynamics. Points (i), (ii) and (iii) will be illustrated by selected examples: (i) chemical shift tensors and heteronuclear (2)J(P-O-Si) coupling constants in the case of silicophosphates and calcium phosphates [Si(5)O(PO(4))(6), SiP(2)O(7) polymorphs and α-Ca(PO(3))(2)]; (ii) antisymmetric chemical shift tensors in cyclopropene derivatives, C(3)X(4) (X = H, Cl, F) and (iii) (14)N and (35)Cl NQR predictions in the case of RDX (C(3)H(6)N(6)O(6)), β-HMX (C(4)H(8)N(8)O(8)), α-NTO (C(2)H(2)N(4)O(3)) and AlOPCl(6). RDX, β-HMX and α-NTO are explosive compounds.

Recent technique developments and applications of solid state NMR in characterising inorganic materials

A broad overview is given of some key recent developments in solid state NMR techniques that have driven enhanced applications to inorganic materials science. Reference is made to advances in hardware, pulse sequences and associated computational methods (e.g. first principles calculations, spectral simulation), along with their combination to provide more information about solid phases. The resulting methodology has allowed more nuclei to be observed and more structural information to be extracted. Cross referencing between experimental parameters and their calculation from the structure has given an added dimension to NMR as a characterisation probe of materials. Emphasis is placed on the progress made in the last decade especially from those nuclei that were little studied previously. The general points about technique development and the increased range of nuclei observed are illustrated through some specific exemplars from inorganic materials science.