Investigation of the Internal Heterostructure of Highly Luminescent Quantum Dot−Quantum Well Nanocrystals

Study of the Interface and Radial Dopant Position in Semiconductor Heterostructures Using X-ray Absorption Spectroscopy

Two questions that remain a challenge in the field of colloidal doped core/shell nanomaterials of different morphologies are the nature of the interface and the radial location of the dopant ion due to the diffusion within the lattice. Using a model system of Cu-doped CdSe/CdS quantum dots, we develop an in-depth understanding of the extended X-ray absorption fine structure (EXAFS) spectra of the dopant and host atoms to address both issues. Our findings suggest that the interface is not sharp, in agreement with the nonstructural studies in the literature. Local structure analysis around the Cu dopant ion confirms that Cu drifts out from the core toward the outer region in the absence of the shell but stays mostly in the core after the formation of a sufficiently thick interfacial barrier (∼2 monolayers). This study highlights the significance of EXAFS spectroscopy in understanding the nature of the interface in nanomaterials.

Probing Chemical-Composition-Induced Heterostructures and Interfaces in Lead Halide Perovskites

Lead halide perovskites (LHP) are of great interest for their optoelectronic properties and photovoltaic applications. Various heterostructures are created in these materials to achieve favorable optical properties and improved stability at the interfaces during the fabrication of devices. Such heterostructures are often assumed to be formed based on the reactivity of precursors and are not directly probed. In this Feature Article, we report how various strategies have been employed in LHP thin films and nanocrystals (NCs) that generate heterostructures to boost their stability and photovoltaic (PV) efficiencies and how variable energy photoelectron spectroscopy (VEPES) can probe the chemical composition variation in heterostructured materials and interfaces. We specifically discussed the internal heterostructures of LHP NCs generated due to the surface chemistry and postsynthesis anion exchange followed by a detailed discussion of the heterostructures induced by the chemical composition (anion, cation, and degradation) of LHP thin films. The difficulties in determining heterostructures as well as the potential scope of the application of VEPES in unwrapping heterostructures in diverse materials are also discussed.

Combining HR-TEM and XPS to elucidate the core-shell structure of ultrabright CdSe/CdS semiconductor quantum dots

Controlling thickness and tightness of surface passivation shells is crucial for many applications of core–shell nanoparticles (NP). Usually, to determine shell thickness, core and core/shell particle are measured individually requiring the availability of both nanoobjects. This is often not fulfilled for functional nanomaterials such as many photoluminescent semiconductor quantum dots (QD) used for bioimaging, solid state lighting, and display technologies as the core does not show the application-relevant functionality like a high photoluminescence (PL) quantum yield, calling for a whole nanoobject approach. By combining high-resolution transmission electron microscopy (HR-TEM) and X-ray photoelectron spectroscopy (XPS), a novel whole nanoobject approach is developed representatively for an ultrabright oleic acid-stabilized, thick shell CdSe/CdS QD with a PL quantum yield close to unity. The size of this spectroscopically assessed QD, is in the range of the information depth of usual laboratory XPS. Information on particle size and monodispersity were validated with dynamic light scattering (DLS) and small angle X-ray scattering (SAXS) and compared to data derived from optical measurements. In addition to demonstrating the potential of this novel whole nanoobject approach for determining architectures of small nanoparticles, the presented results also highlight challenges faced by different sizing and structural analysis methods and method-inherent uncertainties.

Unexpected Optical Blue Shift in Large Colloidal Quantum Dots by Anionic Migration and Exchange

Compositional changes taking place during the synthesis of alloyed CdSeZnS nanocrystals (NCs) allow shifting of the optical features to higher energy as the NCs grow. Under certain synthetic conditions, the effect of those changes on the surface/interface chemistry competes with and dominates over the conventional quantum confinement effect in growing NCs. These changes, identified by means of complementary advanced spectroscopic techniques such as XPS (X-ray photoelectron spectroscopy) and XAS (X-ray absorption spectroscopy), are understood in the frame of an ion migration and exchange mechanism taking place during the synthesis. Control over the synthetic routes during NC growth represents an alternative tool to tune the optical properties of colloidal quantum dots, broadening the versatility of the wet chemical methods.

Frontier challenges in doping quantum dots: synthesis and characterization

Impurity doping in semiconductor quantum dots (QDs) has numerous prospects in implementing and altering their properties and technologies. Herein, we review the state-of-the-art doping techniques arising from colloidal synthesis methods. We first discuss the advantages and challenges involved in doping; we then discuss various doping techniques, including clustering of dopants as well as expulsion out of the lattice due to self-purification. Some of these techniques have been shown to open up a new generation of robust doped semiconductor quantum dots with cluster-free doping which will be suitable for various spin-based solid-state device technologies and overcome the longstanding challenges of controlled impurity doping. Further, we discuss inhibitors such as defects, clustering and interfaces, followed by current open questions. These include pathways to obtain uniform doping in the required radial position with unprecedented control over the dopant concentration and the size of the QDs.

We discuss state-of-the-art doping strategies for colloidal quantum dots, their principle, advantages and challenges in implementing the strategies.

The passivating effect of cadmium in PbS/CdS colloidal quantum dots probed by nm-scale depth profiling

Achieving control of the surface chemistry of colloidal quantum dots (CQDs) is essential to fully exploit their properties in solar cells, but direct measurement of the chemistry and electronic structure in the outermost atomic layers is challenging. Here we probe the surface oxidation and passivation of cation-exchanged PbS/CdS core/shell CQDs with sub nm-scale precision using synchrotron-radiation-excited depth-profiling photoemission. We investigate the surface composition of the topmost 1-2.5 nm of the CQDs as a function of depth, for CQDs of varying CdS shell thickness, and examine how the surface changes after prolonged air exposure. We demonstrate that the Cd is localized at the surface of the CQDs. The surface-localized products of oxidation are identified, and the extent of oxidation quantified. We show that oxidised sulfur species are progressively eliminated as Cd replaces Pb at the surface. A sub-monolayer surface 'decoration' of Cd is found to be effective in passivating the CQDs. We show that the measured energy-level alignments at PbS/CdS colloidal quantum dot surfaces differ from those expected on the basis of bulk band offsets, and are strongly affected by the oxidation products. We develop a model for the passivating action of Cd. The optimum shell thickness (of around 0.1 nm, previously found to give maximised power conversion efficiency in PbS/CdS solar cells) is found to correspond to a trade-off between the rate of oxidation and the introduction of a surface barrier to charge transport.

Demystifying Complex Quantum Dot Heterostructures Using Photogenerated Charge Carriers

The success of heterostructure quantum dots in optoelectronic and photovoltaic applications is based on our understanding of photogenerated charge carrier localization. However, often the actual location of charge carriers in heterostructure semiconductors is quite different from their predicted positions leading to suboptimal results. In this work, photoluminescence of Cu doped heterostructures has been used to study the charge localization of alloys, inverse type I, type II, and quasi type II core/shell structures and graded alloys. Specifically, the adeptness of this method has been assessed over a range of widely studied heterostructures like CdSe/CdS, CdS/CdSe, CdSe/CdTe, Zn_1-xCd_xSe and Zn_1-xCd_xS quantum dots systems by doping them with a small percentage of Cu. The electron and hole localization obtained from this method concurs with the pre-existing understanding in cases that have been explored before, while the internal structure of previously unknown heterostructures have been predicted.

Magnetism at the Interface of Magnetic Oxide and Nonmagnetic Semiconductor Quantum Dots

Engineering interfaces specifically in quantum dot (QD) heterostructures provide several prospects for developing multifunctional building block materials. Precise control over internal structure by chemical synthesis offers a combination of different properties in QDs and allows us to study their fundamental properties, depending on their structure. Herein, we studied the interface of magnetic/nonmagnetic Fe₃O₄/CdS QD heterostructures. In this work, we demonstrate the decrease in the size of the magnetic core due to annealing at high temperature by the decrease in saturation magnetization and blocking temperature. Furthermore, surprisingly, in a prominently optically active and magnetically inactive material such as CdS, we observe the presence of substantial exchange bias in spite of the nonmagnetic nature of CdS QDs. The presence of exchange bias was proven by the increase in magnetic anisotropy as well as the presence of exchange bias field (H_E) during the field-cooled magnetic measurements. This exchange coupling was eventually traced to the in situ formation of a thin antiferromagnetic FeS layer at the interface. This is verified by the study of Fe local structure using X-ray absorption fine structure spectroscopy, demonstrating the importance of interface engineering in QDs.

First-principles study of the influence of different interfaces and core types on the properties of CdSe/CdS core-shell nanocrystals

With the expanding field of nanoengineering and the production of nanocrystals (NCs) with higher quality and tunable size, having reliable theoretical calculations to complement the experimental results is very important. Here we present such a study of CdSe/CdS core-shell NCs using density functional theory, where we focus on dependence of the properties of these NCs on core types and interfaces between the core and the shell, as well as on the core/shell ratio. We show that the density of states and the absorption indices depend rather weakly on the type of interface and core type. We demonstrate that the HOMO wavefunction is mainly localised in the core of the nanocrystal, depending primarily on the core/shell ratio. On the other hand the LUMO wavefunction spreads more into the shell of the nanocrystal, where its confinement in the core is almost the same in each of the studied structural models. Furthermore, we show that the radiative lifetimes decrease with increasing core sizes due to changes in the dipolar overlap integral of the HOMO and LUMO wavefunctions. In addition, the electron-hole Coulomb interaction energies follow a similar pattern as the localisation of the wavefunctions, with the smaller NCs having higher Coulomb interaction energies.

Carrier transport in quantum dot quantum well microstructures of the self-assembled CdTe/CdS/ligand core-shell system

The study on the quantum dot quantum well (QDQW) microstructure modified by choosing different ligands containing a sulfhydryl group is of significance because it enables one to regulate photoexcited free charge carriers' (FCCs') transport behaviours in high-quality CdTe/ligand QDs via a self-assembled way. The photoelectron characteristics of ligand-capped CdTe nanoparticles were probed by a combination of surface photovoltaic (SPV) and photoacoustic technologies, supplemented by a computer simulation method of the CASTEP module. The experiment reveals that the D-value ΔEWi obtained by the associated two parameters of the SPV spectroscopy was closely related to the quantum confinement energy in the self-assembled CdTe/CdS/ligand core-shell system. In the paper the D-value was termed the depth of QWs, which were buried in the space charge regions located in the graded-band-gap and on either side of the shell-CdS. Obvious resonance quantum tunnelling may occur in the energy band structure with deep QWs on using certain ligands, resulting in an extended diffusion length of the FCCs on illumination of the photon energy hν ≥ Eg, core-CdTe, and in a strong SPV response at a specific wavelength region. In addition, the carrier-longitudinal optical phonon interaction is the reciprocal of the carriers' lifetime. The d-frontier orbital in the graded-band-gap plays an important role in both the microstructure and the resonance quantum tunnelling of the QDQW system according to the CASTEP calculations.

Surface properties of nanocrystalline PbS films deposited at the water-oil interface: a study of atmospheric aging

Nanocrystalline thin films of PbS are obtained in a straightforward reaction by precipitation at the interface between toluene (containing a Pb precursor) and water (containing Na2S). Lead thiobiuret [Pb(SON(CN(i)Pr2)2)2] and lead diethyldithiocarbamate [Pb(S2CNEt2)2] precursors are used. The films are characterized by X-ray diffraction and electron microscopy, revealing typical particle sizes of 10-40 nm and preferred (200) orientation. Synchrotron-excited depth-profiling X-ray photoelectron spectroscopy (XPS) is used to determine the depth-dependent chemical composition as a function of surface aging in air for periods of up to 9 months. The as-synthesized films show a 1:1 Pb/S composition. Initial degradation occurs to form lead hydroxide and small quantities of surface-adsorbed -SH species. A lead-deficient Pb1-xS phase is produced as the aging proceeds. Oxidation of the sulfur occurs later to form sulfite and sulfate products that are highly localized at the surface layers of the nanocrystals. These species show logarithmic growth kinetics, demonstrating that the sulfite/sulfate layer acts to passivate the nanocrystals. Our results demonstrate that the initial reaction of the PbS nanocrystals (forming lead hydroxide) is incongruent. The results are discussed in the context of the use of PbS nanocrystals as light-harvesting elements in next-generation solar technology.

Surface ion transfer growth of ternary CdS(1-x)Se(x) quantum dots and their electron transport modulation

We report a surface ion transfer method to synthesise ternary alloy CdS(1-x)Se(x) (0 ≤x≤ 1) quantum dots (QDs) in situ on TiO(2) nanoparticles. By tuning the content of selenium in such quantum dots, the optical absorption spectra can be controllably widened to cover the most of the visible light range. The electron transport of such QDs can be modulated by changing the interfacial electronic energy between CdS(1-x)Se(x) QDs and TiO(2) nanoparticles. The QDs with optimized selenium content (x = 0.72) give a balance between a broad optical absorption and a suitable energy band alignment. The homogenous alloy CdS(1-x)Se(x) QDs achieve a maximum light-harvesting efficiency over 90%, and generate a photocurrent density larger than 10 mA cm(-2), which is 2.6- and 1.4-times that of binary CdS and CdSe QDs sensitized photovoltaic devices.

Study of surface and bulk electronic structure of II-VI semiconductor nanocrystals using Cu as a nanosensor

Efficiency of the quantum dots based solar cells relies on charge transfer at the interface and hence on the relative alignment of the energy levels between materials. Despite a high demand to obtain size specific band offsets, very few studies exist where meticulous methods like photoelectron spectroscopy are used. However, semiconductor charging during measurements could result in indirect and possibly inaccurate measurements due to shift in valence and conduction band position. Here, in this report, we devise a novel method to study the band offsets by associating an atomic like state with the conduction band and hence obtaining an internal standard. This is achieved by doping copper in semiconductor nanocrystals, leading to the development of a characteristic intragap Cu-related emission feature assigned to the transition from the conduction band to the atomic-like Cu d state. Using this transition we determine the relative band alignment of II-VI semiconductor nanocrystals as a function of size in the below 10 nm size regime. The results are in excellent agreement with the available photoelectron spectroscopy data as well as the theoretical data. We further use this technique to study the excitonic band edge variation as a function of temperature in CdSe nanocrystals. Additionally, surface electronic structure of CdSe nanocrystals have been studied using quantitative measurements of absolute quantum yield and PL decay studies of the Cu related emission and the excitonic emission. The role of TOP and oleic acid as surface passivating ligand molecules has been studied for the first time.

Magnetic-plasmonic dual modulated FePt-Au ternary heterostructured nanorods as a promising nano-bioprobe

Ternary FePt-Au nanorods are synthesized as magnetic-plasmonic 1D nanostructures. Besides their widely tunable magnetic properties, their unique plasmonic response to the illumination polarization provides a powerful tool to optically image these sub-wavelength single nanorods. These nanoparticles also show the potential as a novel nano-bioprobe based on the demonstration of simultaneous magnetic manipulation and optical imaging of single particles inside live cells.

Size reduction of CdSe/ZnS core-shell quantum dots photosensitized by benzophenone: where does the Cd(0) go?

The size of core-shell CdSe/ZnS quantum dots can be decreased by using the combined action of an n,π* aromatic ketone and UVA light. Energy-dispersive X-ray spectroscopy as well as X-ray photoelectron spectroscopy techniques gave information on the photosensitization mechanism and the eventual destiny of Cd(2+) and Se(2-) core ions. Our data support the electron transfer from the BP ketyl radical to Cd(2+), leading to Cd(0) and H(+), as well as to the recovery of benzophenone. Elemental Cd remains on the core and, eventually, can be oxidized to CdO. In addition, Se(2-) counterions disperse inside the solution mainly attached to protonated amine ligands. The Se(2-) combines with H(+), leading to SeH(2), which is finally oxidized to Se(0) by oxygen. Therefore, quantum dots illumination in the presence of benzophenones brings about a profound nanoparticle reconstruction which takes place after dark storage; this agrees with the drastic quenching of the quantum dot emission detected immediately after illumination as well as the slow recovery in the dark.

Internal structure of InP/ZnS nanocrystals unraveled by high-resolution soft X-ray photoelectron spectroscopy

High-energy resolution photoelectron spectroscopy (DeltaE < 200 meV) is used to investigate the internal structure of semiconductor quantum dots containing low Z-contrast elements. In InP/ZnS core/shell nanocrystals synthesized using a single-step procedure (core and shell precursors added at the same time), a homogeneously alloyed InPZnS core structure is evidenced by quantitative analysis of their In3d(5/2) spectra recorded at variable excitation energy. When using a two-step method (core InP nanocrystal synthesis followed by subsequent ZnS shell growth), XPS analysis reveals a graded core/shell interface. We demonstrate the existence of In-S and S(x)-In-P(1-x) bonding states in both types of InP/ZnS nanocrystals, which allows a refined view on the underlying reaction mechanisms.

Synthesis of Aqueous CdTe/CdS/ZnS Core/shell/shell Quantum Dots by a Chemical Aerosol Flow Method

This work described a continuous method to synthesize CdTe/CdS/ZnS core/shell/shell quantum dots. In an integrated system by flawlessly combining the chemical aerosol flow system working at high temperature (200-300 degrees C) to generate CdTe/CdS intermediate products and an additional heat-up setup at relatively low temperature to overcoat the ZnS shells, the CdTe/CdS/ZnS multishell structures were realized. The as-synthesized CdTe/CdS/ZnS core/shell/shell quantum dots are characterized by photoluminescence spectra, X-ray diffraction (XRD), energy-dispersive X-ray spectra (EDS), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). Fluorescence and XRD results confirm that the obtained quantum dots have a core/shell/shell structure. It shows the highest quantum yield above 45% when compared to the rhodamine 6G. The core/shell/shell QDs were more stable via the oxidation experiment by H(2)O(2).