Catalyst-free preparation of melamine-based microporous polymer networks through Schiff base chemistry

Engineering Nanoporous Polyaminal Networks for Superior SO2 Capture and Selectivity

Designing adsorbent materials with high SO2 adsorption capacities and selectivity remains a significant challenge in flue gas desulfurization. This work focuses on developing two nitrogen-rich nanoporous polyaminal networks (NPANs), which demonstrate promising capabilities for SO2 adsorption and separation. Two nitrogen-rich nanoporous polyaminal networks, NPAN-5 and NPAN-6, were synthesized via a one-pot method using thiophene-2,5-dicarbaldehyde and furan-2,5-dicarbaldehyde with 1,4-bis(2,4-diamino-1,3,5-triazine)-benzene, respectively. The Brunauer-Emmett-Teller (BET) specific surface areas of NPANs range from 838 to 956 m2·g-1. At 298 K and pressures of 0.1 and 1.0 bar, NPAN-5, featuring thiophene units, demonstrates a SO2 adsorption uptake of 5.14 and 9.63 mmol·g-1, respectively, surpassing many previously reported materials. Furthermore, at room temperature, NPAN-6, containing furan moieties, exhibits unprecedented selectivity for SO2 over CO2 and N2, with ratios reaching up to 78 and 9321, respectively. Dynamic breakthrough experiments reveal that NPANs effectively separate SO2 from a ternary gas mixture comprising SO2, CO2, and N2 at concentrations of 0.2, 10, and 89.8%, respectively. Notably, NPAN-6 achieves a prolonged SO2 retention time of 218 min·g-1 and a saturation adsorption uptake of 0.42 mmol·g-1. The remarkable SO2 adsorption capacities and selectivities demonstrated by these nitrogen-rich nanoporous polyaminal networks underscore their potential to revolutionize industrial flue gas desulfurization.

In-situ strategies for melamine-functionalized graphene oxide nanosheets-based nanocomposite proton exchange membranes in wide-temperature range applications

The traditional preparation of nanocomposite proton exchange membranes (PEM) is hindered by poor organic-inorganic interface compatibility, insufficient proton-conducting sites, easy aggregation of nanoparticles, and difficulty in leveraging nanoscale advantages. In this study, a novel method involving electrochemical anodic oxidation exfoliation was employed to prepare melamine-coated graphene oxide (Me@GO), which was subsequently subjected to in-situ polymerization with poly(2,5-benzimidazole) (ABPBI) to prepare a Me@GO/ABPBI composite proton exchange membrane. Benefiting from the strong hydrogen bonding and large π stacking interactions, melamine (Me) tightly bound to graphene oxide (GO), effectively preventing the secondary aggregation of GO after exfoliation. Moreover, the abundant alkaline functional groups of melamine enhanced the enhancement of phosphoric acid (PA) retention in the Me@GO/ABPBI membranes, thereby increasing the number of proton-conducting sites. The experimental results indicated that the introduction of Me@GO enhanced membrane properties. For Me@GO at a concentration of 1 wt%, the tensile strength of the 1Me@GO/ABPBI composite membrane reached 207 MPa, nearly 2.52 times that of the pure membrane. The proton conductivity of the 1Me@GO/ABPBI composite membrane reached 0.01 S cm-1 across a wide temperature range (40-180 °C), peaking at 0.087 S cm-1 at 180 °C. Additionally, a single-cell incorporating the 1Me@GO/ABPBI composite membrane achieved a peak power density of 0.304 W cm-2 at 160 °C, nearly 1.46 times that of the pure membrane. Benefiting from the well-dispersed and PA-enriched proton channels provided by Me@GO, the Me@GO/ABPBI composite membrane exhibits excellent prospects for wide-temperature range (40-180 °C) applications.

Unveiling the Stability of Encapsulated Pt Catalysts Using Nanocrystals and Atomic Layer Deposition

Platinum exhibits desirable catalytic properties, but it is scarce and expensive. Optimizing its use in key applications such as emission control catalysis is important to reduce our reliance on such a rare element. Supported Pt nanoparticles (NPs) used in emission control systems deactivate over time because of particle growth in sintering processes. In this work, we shed light on the stability against sintering of Pt NPs supported on and encapsulated in Al2O3 using a combination of nanocrystal catalysts and atomic layer deposition (ALD) techniques. We find that small amounts of alumina overlayers created by ALD on preformed Pt NPs can stabilize supported Pt catalysts, significantly reducing deactivation caused by sintering, as previously observed by others. Combining theoretical and experimental insights, we correlate this behavior to the decreased propensity of oxidized Pt species to undergo Ostwald ripening phenomena because of the physical barrier imposed by the alumina overlayers. Furthermore, we find that highly stable catalysts can present an abundance of under-coordinated Pt sites after restructuring of both Pt particles and alumina overlayers at a high temperature (800 °C) in C3H6 oxidation conditions. The enhanced stability significantly improves the Pt utilization efficiency after accelerated aging treatments, with encapsulated Pt catalysts reaching reaction rates more than two times greater than those of a control supported Pt catalyst.

Melamine phosphate-modified magnetic chitosan: a novel biocompatible catalyst for the synthesis of biological tetrahydrodipyrazolopyridine and pyrazolopyranopyrimidine derivatives

A novel biocompatible composite was fabricated by the functionalization of magnetic chitosan with the melamine phosphate (MP) ionic compound to serve as a recoverable and bifunctional catalyst, aiming at the diversity-oriented generation of biological tetrahydropyrazolopyridine and pyrazolopyrimidine derivatives. This involved a meticulously orchestrated reaction, exploiting the in situ generated pyrazole alongside aromatic aldehydes, ammonium acetate, and (thio) barbituric acid. The present work manifests outstanding advantages, offering a novel and great method for the optimal synthesis of two valuable heterocyclic series especially five new derivatives. The resulting novel biocompatible composite was comprehensively characterized through a range of analytical techniques, including FT-IR, NH3 and CO2-TPD, XRD, TEM, FE-SEM, VSM, EDX, elemental CHNS analysis, ICP-MS, and NMR spectroscopy. Notably, the study represents a critical step in the preparation of advanced materials from accessible and cost-effective precursors.

Schiff-base Polymer Immobilized Ruthenium for Efficient Catalytic Cross-coupling of Secondary Alcohols with 2-amino- and γ-aminobenzyl Alcohols to Give Quinolines and Pyridines

A Schiff-base porous polymer has been impregnated with ruthenium trichloride for acceptor-free dehydrogenation coupling (ADC) of secondary alcohols with γ-amino- and 2-aminobenzyl alcohols to give pyridines and quinolines. This heterogenous catalyst exhibited high catalytic efficiency over repeated cycles with wide functional group tolerance.

Tunable schiff-based networks with different bonding sites for enhanced photocatalytic activity under visible-light irradiation: The effects of steric hindrance

Organic polymers hold great potential in photocatalysis considering their low cost, structural tailorability, and well-controlled degree of conjugation for efficient electron transfer. Among the polymers, Schiff base networks (SNWs) with high nitrogen content have been noticed. Herein, a series of SNWs is synthesized based on the melamine units and dialdehydes with different bonding sites. The chemical and structural variation caused by steric hindrance as well as the related photoelectric properties of the SNW samples are investigated, along with the application exploration on photocatalytic degradation and energy production. The results demonstrate that only SNW-o based on o-phthalaldehyde responds to visible light, which extends to over 550 nm. SNW-o shows the highest tetracycline degradation rate of 0.02516 min-1, under 60-min visible light irradiation. Moreover, the H2O2 production of SNW-o is 2.14 times higher than that of g-C3N4. The enhanced photocatalytic activity could be ascribed to the enlarged visible light adsorption and intramolecular electron transfer. This study indicates the possibility to regulate the optical and electrical properties of organic photocatalysts on a molecular level, providing an effective strategy for rational supramolecular engineering to the applications of organic materials in photocatalysis.

Ultrafast adsorption of hexavalent chromium from aqueous effluents using covalent triazine frameworks

We have synthesized low-cost high performance covalent triazine framework (CTF) through Schiff base reaction of melamine and terephthalaldehyde with different proportions of the reactants. The synthesized adsorbents showed excellent capacity for adsorption of Cr (VI) at acidic pH while almost negligible adsorption at higher pH. The adsorbent displays excellent reusability, with a little decrease in adsorption capacity with the increasing number of cycles. Moreover, Cr (VI) the adsorption is unaffected by the presence of 50-500 times higher concentration of alkali metal and halide ions in solution, while sulphate ions demonstrate shielding behavior decreasing the adsorption capacity. Mechanistic studies indicate electrostatic attractions, ion exchange and reduction being responsible for the adsorption mediated by abundant nitrogen sites that also imbibes the adsorbent with high capacity. The adsorbent was also utilized to recover chromium from an industrial electroplating effluent, which demonstrates applicability of material for practical applications.

Covalent Organic Framework Impregnated with Silver and Copper Nanoparticles: An Advanced Approach for Catalytic Degradation of Organic Pollutants in Wastewater

In this study, we introduce an economically viable and scalable process for developing a novel covalent organic framework (COF), which is a cross-linked polymer. The resulting material, TzTFB-COF, is successfully functionalized with silver and copper nanoparticles, which show high adequacy in the degradation of nitroaromatic compounds (NACs). For the synthesis of TzTFB-COF, s-tetrazine diamine (Tz) and 1,3,5-triformylbenzene (TFB) are chosen as building blocks, which exhibit a high density of nitrogen-containing sites. TzTFB-COF shows good chemical and thermal stability (>300 °C). For functionalization of TzTFB-COF with silver and copper nanoparticles, a solution infiltration technique is used. The composite materials, i.e., Ag@TzTFB-COF and Cu@TzTFB-COF, have been characterized using various spectroscopic and analytical techniques, which show high activity, high selectivity, and excellent chemical and thermal stability up to 350 °C. The silver and copper contents of Ag@TzTFB-COF and Cu@TzTFB-COF are determined to be 9.6 and 12.4 wt % by inductively coupled plasma optical emission spectrometer (ICP-OES). The catalytic efficiency of the synthesized Ag@TzTFB-COF and Cu@TzTFB-COF materials is assessed in the context of catalyzing the hydrogenation of NACs. Experimental results reveal a remarkable catalytic performance when conducted in an aqueous medium, and notably, the materials demonstrate substantial potential for reusability across multiple catalytic cycles. The determined parameters for the catalytic hydrogenation reaction, i.e., the rate constants and Gibbs free energies, are found to be 0.0185 s-1 and 9.878 kJ/mol for Ag@TzTFB-COF and 0.0219 s-1 and 9.615 kJ/mol for Cu@TzTFB-COF. Thus, the catalytic reaction exhibits characteristics of endothermic, endergonic, and nonspontaneous nature.

Mesoporous α-Al2O3-supported PdCu bimetallic nanoparticle catalyst for the selective semi-hydrogenation of alkynes

The selective hydrogenation of alkynes to alkenes is widely applied in the chemical industry; nevertheless, achieving highly selective hydrogenation with high catalytic activity is considerably challenging. Herein, ultrafine PdCu bimetallic nanoparticles encapsulated by high-surface-area mesoporous α-Al2O3 were prepared by high-temperature calcination-reduction using a porous organic framework (POF) as the template. As-obtained PdCu@α-Al2O3 exhibited a high selectivity of 95% for the semi-hydrogenation of phenylacetylene as a probe reaction under mild reaction conditions. The separation of continuous Pd atoms and modification of the Pd electronic state by Cu atoms suppressed β-hydride formation and alkene adsorption, contributing to high selectivity for the catalytic hydrogenation of alkynes. The catalytic activity was maintained after 7 cycles due to the strong interaction between the PdCu bimetallic nanoparticles and α-Al2O3 as well as the encapsulation effect of mesoporous α-Al2O3. Thus, the current work provides a facile strategy for fabricating high-surface-area mesoporous α-Al2O3-supported catalysts for industrial catalysis applications.

Synthesizing Interpenetrated Triazine-based Covalent Organic Frameworks from CO2

Crystalline triazine-based covalent organic frameworks (COFs) are aromatic nitrogen-rich porous materials. COFs typically show high thermal/chemical stability, and are promising for energy applications, but often require harsh synthesis conditions and suffer from low crystallinity. In this work, we propose an environmentally friendly route for the synthesis of crystalline COFs from CO2 molecules as a precursor. The mass ratio of CO2 conversion into COFs formula unit reaches 46.3 %. The synthesis consists of two steps; preparation of 1,4-piperazinedicarboxaldehyde from CO2 and piperazine, and condensation of the dicarboxaldehyde and melamine to construct the framework. The CO2 -derived COF has a 3-fold interpenetrated structure of 2D layers determined by powder X-ray diffraction, high-resolution transmission electron microscopy, and select-area electron diffraction. The structure shows a high Brunauer-Emmett-Teller surface area of 945 m2  g-1 and high stability against strong acid (6 M HCl), base (6 M NaOH), and boiling water over 24 hours. Post-modification of the framework with oxone has been demonstrated to modulate hydrophilicity, and it exhibits proton conductivity of 2.5×10-2  S cm-1 at 85 °C, 95 % of relative humidity.

Reticular Synthesis of Highly Crystalline Three-Dimensional Mesoporous Covalent-Organic Frameworks for Lipase Inclusion

The synthesis and application of three-dimensional (3D) mesoporous covalent-organic frameworks (COFs) are still to be developed. Herein, two mesoporous 3D COFs with an stp topology were synthesized in a highly crystalline form with aniline as the modulator. The chemical composition of these COFs was confirmed by Fourier transform infrared (FT-IR) and 13C cross-polarization magic angle spinning nuclear magnetic resonance (NMR) spectroscopies. These 3D mesoporous COFs were highly crystalline and exhibited permanent porosity and good chemical stability in both aqueous and organic media. The space group and unit cell parameters of COF HFPTP-TAE were verified by powder X-ray diffraction (PXRD), small-angle X-ray scattering, and three-dimensional electron diffraction (3D ED). The appropriate pore size of the COF HFPTP-TAE facilitated the inclusion of enzyme lipase PS with a loading amount of 0.28 g g-1. The lipase⊂HFPTP-TAE (⊂ refers to "include in") composite exhibited high catalytic activity, good thermal stability, and a wide range of solvent tolerance. Specifically, it could catalyze the alcoholysis of aspirin methyl ester (AME) with high catalytic efficiency. Oriented one-dimensional (1D) channel mesopores in HFPTP-TAE accommodated lipase, meanwhile preventing them from aggregation, while windows on the wall of the 1D channel favored molecular diffusion; thus, this COF-enzyme design outperformed its amorphous isomer, two-dimensional (2D) mesoporous COF, 3D mesoporous COF with limited crystallinity, and mesoporous silica as an enzyme host.

Photochemical and gas adsorption studies of Keggin polyoxometalate functionalized porous melamine terephthaldehyde material

A compound containing a microporous melamine-terephthaldehyde framework is protonated by grinding with acetic acid, resulting in a mesoporous protonated melamine-terephthaldehyde network. The Keggin polyanion [PMo12O40]3- is then immobilized into this protonated melamine-terephthaldehyde network through a solid-state reaction. The polyanion interacts with the protonated microporous organic network through electrostatic interaction. Three different Keggin-melamine-terephthaldehyde materials were synthesized by varying the Keggin anion loading of 10 wt%, 15 wt% and 20 wt%. The Keggin-melamine-terephthaldehyde materials exhibit photochromism on irradiation with sunlight. The photochromism of the POM-organic hybrid material is due to reduction of the Keggin anion. The resulting blue reduced Keggin-melamine-terephthaldehyde materials are oxidized back by treatment with hydrogen peroxide. The N2, CO2 and H2 adsorption properties of all the synthesized materials, including protonated melamine-terephthaldehyde materials, were studied. The materials were characterized by IR, PXRD, DRS, TGA, EPR spectroscopy, and FESEM electron microscopy. The elemental composition was analysed with a CHN analyser and ICP-OES analysis.

A miniaturized analytical system with packed epoxy-functionalized mesoporous organosilica for copper determination using a customized Android-based software

A smartphone-assisted determination of copper ions is introduced by using a down-scaled microfluidic mixer. The system was coupled with a micro-column packed with a periodic mesoporous organosilica (PMO) material for preconcentration of copper ions. Copper ions were reduced to Cu(I) on-chip to selectively form an orange-colored complex with neocuproine. A novel Android-based software was made to determine the color change of the adsorbent by analyzing red-green-blue (RGB) components of images from the packed PMO material. Four porous framework materials with high porosity and chemical stability were synthesized and compared for the extraction of the Cu-neocuproine complex. The main parameters influencing the complex extraction efficiency were optimized. The analytical performance of the method showed limit of detection and quantification of 0.2 μg L^-1 and 0.5 μg L^-1, respectively. The accuracy and precision of the method were determined as recovery > 92% and relative standard deviations < 5.2% at medium concentration level (n = 5). Due to accumulation of the retained analyte in a single point and elimination of the stripping step, the RGB-based method showed sensitivity and precision higher than inductively coupled plasma-atomic emission spectrometry (ICP-AES) for determination of copper ions. To investigate the applicability of the method, six different water samples were analyzed. The t-test on the data showed that the method has no significant difference when compared with ICP-AES determination.

Recent Progress of Covalent Organic Frameworks Applied in Electrochemical Sensors

As an emerging porous crystalline organic material, the covalent organic frameworks (COFs) are given more and more attention in many fields, such as gas storage and separation, catalysis, energy storage and conversion, luminescent devices, drug delivery, pollutant adsorption and removal, analysis and detection due to their special advantages of high crystallinity, flexible designability, controllable porosities and topologies, intrinsic chemical and thermal stability. In recent years, the COFs are applied in analytical chemistry, for instance, chromatography, solid-phase microextraction, luminescent and colorimetric sensing, surface-enhanced Raman scattering and electroanalytical chemistry. The COFs decorated electrodes show high performance for detecting trace substances with remarkable selectivity and sensitivity, such as heavy metal ions, glucose, hydrogen peroxide, drugs, antibiotics, explosives, phenolic compounds, pesticides, disease metabolites and so on. This review mainly summarized the application of COF based electrochemical sensor according to different target analytes.

High sensitivity for detecting trace Sn2+ in canned food using novel covalent organic frameworks

Tin (Sn) element plays a vital role in the human body, and its detection is a mandatory inspection item for canned food. The application of covalent organic frameworks (COFs) in fluorescence detection has received extensive attentions. In this work, we designed a kind of novel COFs (COF-ETTA-DMTA) with high specific surface area (353.13 m²/g) by solvothermal synthesis using 2,5-dimethoxy-1,4-dialdehyde and tetra (4-aminophenyl) ethylene as precursors. It shows fast response time (about 50 s), low detection limit (228 nM) and good linearity (R² = 0.9968) for the detection of Sn²⁺. Via coordination behavior, the recognition mechanism of COFs toward Sn²⁺ was simulated and verified by the small molecule with the same functional unit. More importantly, this COFs was successfully applied to identify Sn²⁺ in solid canned food (luncheon pork, canned fish, canned red kidney beans) with satisfactory results. This work provides a new approach for determining metal ions with COFs taking the advantage of their natural rich reaction set and specific surface area, improving the detection sensitivity and capacity.

An overview of the synthetic strategies of C3-symmetric polymeric materials containing benzene and triazine cores and their biomedical applications

C3-symmetric star-shaped materials are an emerging category of porous organic polymers with distinctive properties such as permanent porosity, good thermal and chemical stability, high surface area, and appropriate functionalization that promote outstanding potential in various applications. This review is mostly about constructing benzene or s-triazine rings as the center of C3-symmetric molecules and using side-arm reactions to add functions to these molecules. Over and above this, the performance of various polymerization processes has been additionally investigated in detail, including the trimerization of alkynes or aromatic nitriles, polycondensation of monomers with specific functional groups, and cross-coupling building blocks with benzene or triazine cores. Finally, the most recent progress in biomedical applications for C3-symmetric materials based on benzene or s-triazine have been summarized.

Triazine-Based Porous Organic Polymers: Synthesis and Application in Dye Adsorption and Catalysis

The scientific community has been developing promising materials to increase the sustainability and efficiency of production processes and pollutant environmental remediation strategies. Porous organic polymers (POPs) are of special interest, as they are insoluble custom-built materials at the molecular level, endowed with low densities and high stability, surface areas, and porosity. This paper describes the synthesis, characterization, and performance of three triazine-based POPs (T-POPs) in dye adsorption and Henry reaction catalysis. T-POPs were prepared by a polycondensation reaction between melamine and a dialdehyde (terephthalaldehyde (T-POP1) or isophthalaldehyde derivatives with a hydroxyl group (T-POP2) or both a hydroxyl and a carboxyl group (T-POP3)). The crosslinked and mesoporous polyaminal structures, with surface areas between 139.2 and 287.4 m² g^-1, positive charge, and high thermal stability, proved to be excellent methyl orange adsorbents, removing the anionic dye with an efficiency >99% in just 15-20 min. The POPs were also effective for methylene blue cationic dye removal from water, reaching efficiencies up to ca. 99.4%, possibly due to favorable interactions via deprotonation of T-POP3 carboxyl groups. The modification of the most basic polymers, T-POP1 and T-POP2, with copper(II) allowed the best efficiencies in Henry reactions catalysis, leading to excellent conversions (97%) and selectivities (99.9%).

Microporous melamine-formaldehyde networks loaded on rice husks for dynamic removal of organic micropollutants

The alteration of agricultural wastes into novel adsorbents can stimulate their scalability in realistic application, showing great economic and environmental advantages. Here, we proposed a strategy to engineer rice husk (RH) with microporous melamine-formaldehyde networks (MFNs) resins and the utilization for dynamic removal of organic micropollutants rapidly and efficiently. was pre-treated to acquire attractive surface and unique hierarchical porosity, endowing with surface functionalization and essential filtering properties. MFNs can be uniformly generated in-situ on the fully exposed cellulose backbones of the pre-treated RH. MFNs granules functionalized RH (RH@MFNs) exhibited high removal efficiencies over 90% within 30 min for the adsorption of hazardous organic compounds (e.g., phenolic and antibiotic micropollutants) in static tests. Experiment results and density functional theory (DFT) simulation revealed that the synergy of hydrogen bonding, π-πinteraction, and micropore preservation dominates the adsorption. Further dynamic adsorption experiments showed that the removal efficiency and equilibrium removal capacity towards bisphenol A by RH@MFNs packed bed up-flow column were 2.6 and 67 times higher than that of raw RH, respectively. The column adsorption fits well with the Thomas model and bed depth service time (BDST) kinetic model. The inherent macropores inside RH and the roughness caused by the spiky structures and mesopores outside RH, as well as the accumulated MFNs granules, can lead to local turbulence of water flow around RH@MFNs, enabling fast and efficient adsorption. This sustainable and cost-effective preparation of RH-based adsorbents sheds light on the rational design of biomass waste adsorbents for realistic wastewater.

Novel Carbazole-Based Porous Organic Polymer for Efficient Iodine Capture and Rhodamine B Adsorption

A new porous organic polymer (CTF-CAR), which takes carbazole as the electron-rich center unit and thiophenes as the auxiliary group, has been synthesized through catalyst-free Schiff-base polymerization. At the same time, the structure, thermal stability, morphology, and other basic properties of the polymer were analyzed by IR, NMR, TGA, and SEM. Then, CTF-CAR was applied to iodine capture and rhodamine B adsorption. Due to its strong electron donor ability and abundant heteroatom binding sites, which have a positive effect on the interaction between the polymer network and adsorbates, CTF-CAR exhibits high uptake capacities for iodine vapor and rhodamine B as 2.86 g g-1 and 199.7 mg g-1, respectively. The recyclability test also confirmed that it has good reusability. We found that this low-cost and catalyst-free synthetic porous organic polymer has great potential for the treatment of polluted water and iodine capture.

Natural phenol-inspired porous polymers for efficient removal of tetracycline: Experimental and engineering analysis

Efficient and feasible removal of trace antibiotics from wastewater is extremely important due to its environmental persistence, bioaccumulation, and toxicity, but still remains a huge challenge. Herein, three natural phenol-inspired porous organic polymers were fabricated from natural phenolic-derived monomers (p-hydroxy benzaldehyde, 2,4-dihydroxy benzaldehyde and 2,4,6-trihydroxy benzaldehyde) and melamine via polycondensation reaction. Characterization highlighted that the increasing contents of hydroxyl groups in monomers induced an increase of the polymer total porosity and promoted the formation of a highly microporous structure. With mesopore-dominated pore (average pore diameter 9.6 nm) and large pore volume (1.78 cm³/g), p-hydroxy benzaldehyde-based porous polymer (1-HBPP) exhibited ultra-high maximum adsorption capacity (q_max) of 697.6 mg/g for tetracycline (TC) antibiotic. Meanwhile, the porous networks and plentiful active sites of 1-HBPP enabled fast adsorption kinetics (within 10 min) for TC removal, which could be well described by the pseudo-second-order model. Dynamic adsorption studies showed that 1-HBPP could be used in fixed-bed adsorption column (FBAC) with high removal efficiency (breakthrough volume per unit mass, 13.2 L/g) and dynamic adsorption capacity (201.6 mg/g), which were much higher than other reported adsorbents. The breakthrough curves both well matched with Thomas and Yoon-Nelson models in FBAC treatment. Moreover, removal mechanism analysis affirmed that pore-filling, hydrogen bonding, electrostatic interactions and π-π stacking interactions were main driving forces for TC adsorption. The prepared natural phenol-inspired porous adsorbents show great potential in antibiotics removal from wastewater, and this strategy would promote the sustainable and high-value utilization of natural phenolic compounds.

Evaluation of an Imine-Linked Polymer Organic Framework for Storage and Release of H2S and NO

Hydrogen sulfide (H₂S) and nitric oxide (NO) are especially known as toxic and polluting gases, yet they are also endogenously produced and play key roles in numerous biological processes. These two opposing aspects of the gases highlight the need for new types of materials to be developed in addition to the most common materials such as activated carbons and zeolites. Herein, a new imine-linked polymer organic framework was obtained using the inexpensive and easy-to-access reagents isophthalaldehyde and 2,4,6-triaminopyrimidine in good yield (64%) through the simple and catalyst-free Schiff-base reaction. The polymeric material has microporosity, an A_BET surface area of 51 m²/g, and temperature stability up to 300 °C. The obtained 2,4,6-triaminopyrimidine imine-linked polymer organic material has a higher capacity to adsorb NO (1.6 mmol/g) than H₂S (0.97 mmol/g). Release studies in aqueous solution showed that H₂S has a faster release (3 h) from the material than NO, for which a steady release was observed for at least 5 h. This result is the first evaluation of the possibility of an imine-linked polymer organic framework being used in the therapeutic release of NO or H₂S.

Advances in the Synthesis of Covalent Triazine Frameworks

Covalent triazine frameworks (CTFs) are a class of organic polymer materials constructed by aromatic 1,3,5-triazine rings with planar π-conjugation properties. CTFs are highly stable and porous with N atoms in the frameworks, possessing semiconductive properties; thus they are widely used in gas adsorption and separation as well as catalysis. The properties of CTFs strongly depend on the type of monomers and the synthesis process. Synthesis methods including ionothermal polymerization, amino-aldehyde synthesis, trifluoromethanesulfonic acid catalyzed synthesis, and aldehyde-amidine condensation have been intensively studied in recent years. In this review, we discuss the recent advances and future developments of CTFs synthesis.

A Schiff base networks coated stir bar for sorptive extraction of pyrethroid pesticide residues in tobacco

Schiff base networks (SNWs) were introduced as a new stir bar coating, and a method of SNWs- coated stir bar sorptive extraction (SBSE) coupled to high performance liquid chromatography-ultraviolet detector (HPLC-UV) was developed for determination of pyrethroid pesticide residues in tobacco. The prepared amorphous SNWs polymer from melamine and 3,5-dihydroxybenzaldehyde riches in triazine rings, hydroxyl groups and amino groups, and the SNWs/polydimethylsiloxane (PDMS) stir bar prepared by sol-gel method can extract weakly polar pyrethroid pesticides through hydrophobic, π-π and hydrogen bonding. The SNWs/PDMS stir bar exhibited high extraction efficiency toward pyrethroid pesticides (70-76%) and good mechanical stability with reused time more than 50 times. Under the optimal experimental conditions, the limits of detection were 0.20 - 0.66 µg/L with relative standard deviation varying in the range of 2.3-8.2%, which meets the requirements of trace analysis of pesticide residues in the tobacco industry. The method was applied to the determination of six pyrethroid pesticides in cigarette samples, and the recovery for the spiked samples ranged from 82 to 117%, showing a great applicability for the analysis of pesticide residues in real samples with a complex sample matrix.

Covalent Organic Frameworks (COFs) as Multi-Target Multifunctional Frameworks

Covalent organic frameworks (COFs), synthesized from organic monomers, are porous crystalline polymers. Monomers get attached through strong covalent bonds to form 2D and 3D structures. The adjustable pore size, high stability (chemical and thermal), and metal-free nature of COFs make their applications wider. This review article briefly elaborates the synthesis, types, and applications (catalysis, environmental Remediation, sensors) of COFs. Furthermore, the applications of COFs as biomaterials are comprehensively discussed. There are several reported COFs having good results in anti-cancer and anti-bacterial treatments. At the end, some newly reported COFs having anti-viral and wound healing properties are also discussed.

Microporous Polymelamine Framework Functionalized with Re(I) Tricarbonyl Complexes for CO2 Absorption and Reduction

A mixture of polymeric complexes based on the reaction between Re(CO)₅Cl and the porous polymeric network coming from the coupling of melamine and benzene-1,3,5-tricarboxaldehyde was obtained and characterized by FTIR, NMR, SEM, XPS, ICP, XRD, and cyclic voltammetry (CV). The formed rhenium-based porous hybrid material reveals a noticeable capability of CO₂ absorption. The gas absorption amount measured at 295 K was close to 44 cm³/g at 1 atm. An interesting catalytic activity for CO₂ reduction reaction (CO₂RR) is observed, resulting in a turn over-number (TON) close to 6.3 under 80 min of test at -1.8 V vs. Ag/AgCl in a TBAPF₆ 0.1 M ACN solution. A possible use as filler in membranes or columns can be envisaged.

Nitrogen-rich triazine-based porous polymers for efficient removal of bisphenol micropollutants

Achieving both rapid adsorption rate and high adsorption capacity for bisphenol micropollutants from aquatic systems is critical for efficient adsorbents in water remediation. Here, we elaborately prepared three nitrogen-rich triazine-based porous polymers (NTPs) with similar geometric configurations and nitrogen contents (41.70-44.18 wt%) while tunable BET surface areas and micropore volumes in the range of 454.7-536.3 m² g^-1 and 0.20-0.84 cm³ g^-1, respectively. It was systematically revealed that the synergy of hydrogen bonding, π-π electron-donor-acceptor interaction, and micropore preservation promoted the rapid (within 5 min) and high capacity adsorption of bisphenols by NTPs. Particularly, microporous-dominated NTPs-3 with the highest micro-pore volume (0.84 cm³ g^-1) displays remarkable adsorption capacity towards bisphenol A as evidenced by the adsorption capacity of 182.23 mg g^-1. A simple column filter constructed by NTPs-3 also expressed good dynamic adsorption and regeneration capacity. This work provided new insight into the rational design and engineering of nitrogen-rich porous polymers for the remediation of micropollutant wastewater.

Synthesis and Characterization of Bipyridine-Based Polyaminal Network for CO2 Capture

The response to the high demand for decreasing the amount of CO₂ in the atmosphere, a new polyaminal-based polymer network was designed and successfully prepared through one-pot polycondensation reaction of melamine and [2,2′-Bipyridine]-5,5′-dicarbaldehyde. The formation of the polymer structure was confirmed by FT-IR, solid-state ¹³C NMR, and powder-X-ray diffraction. The porous properties of the polymeric structure were confirmed by field-emission scanning electron microscope and N₂ adsorption–desorption methods at 77 K. The prepared polymer can take up 1.02 mmol/g and 0.71 mmol/g CO₂ at 273 K and 298 K, respectively, despite its relatively modest Brunauer–Emmett–Teller (BET) surface area (160.7 m²/g), due to the existence of superabundant polar groups on the pore surfaces.

Facile synthesis of a triazine-based porous organic polymer containing thiophene units for effective loading and releasing of temozolomide

Suzuki cross-coupling reaction was employed to easily obtain a triazine-based porous organic polymer (2,4,6-tris(5-bromothiophene-2-yl)-1,3,5-triazine [TBrTh]–1,3,5-benzene-triyltriboronic acid pinacol ester [BTBPE]–covalent triazine framework [CTF]) containing thiophene units. The chemical structure of TBrTh–BTBPE–CTF was revealed by solid-state 13C NMR, Fourier-transform infrared, and X-ray photoelectron spectroscopy. TBrTh–BTBPE–CTF with an amorphous structure exhibited excellent thermal stability and intrinsic porosity (373 m2·g−1 of Brunauer–Emmett–Teller surface area). Consequently, temozolomide (TMZ) was used as an oral alkylating agent in melanoma treatment to explore the drug loading and releasing behavior of TBrTh–BTBPE–CTF as a result of the low cytotoxicity of thiophene-based polymers. The successful loading of TMZ within the polymeric structure was suggested by thermogravimetric analysis and N2 sorption isotherms. The release experiments were performed in phosphate-buffered saline at pH values of 5.5 and 7.4, exhibiting good controlled-release properties. These results suggest that the current porous organic polymer is expected to be a drug carrier for the delivery and release of TMZ.

Ultra-trace levels voltammetric determination of Pb2+ in the presence of Bi3+ at food samples by a Fe3O4@Schiff base Network1 modified glassy carbon electrode

In this research, a highly sensitive electrochemical sensor was developed for the square wave anodic stripping voltammetric determination of Pb²⁺ at ultra-trace levels. A Glassy carbon electrode was modified with an in-situ electroplated bismuth film and the nanocomposite of a recently synthesized melamine based covalent organic framework (schiff base network₁ (SNW₁)) and Fe₃O₄ nanoparticles (Fe₃O₄@SNW₁). The obtained results exhibit clearly that combination of Fe₃O₄@SNW₁ and in-situ electroplated bismuth film enhances the sensitivity of the modified electrode towards Pb²⁺ remarkably. A Plackett-Burman design was implemented for screening experimental factors to specify the significant variables influencing the sensitivity of the electroanalytical method. Afterward, the effective factors were optimized using Box-Behnken design (BBD). Under optimized conditions, the proposed electrode showed a linear response towards Pb²⁺ in the concentration range of 0.003-0.3 μmol L^-1 with the detection limit of 0.95 nmol L^-1. The selectivity of the fabricated electrode towards different ionic species were checked out and no serious interference was observed. At the end, the application of the designed sensor in the determination of Pb²⁺ at 10 different edible specimens were investigated and the obtained recovery values were in the range of (95.56-106.64%) indicating the successful performance of the designed sensor.