Rapid Separation and Purification of Nanoparticles in Organic Density Gradients

Size-Dependent Electrostatic Adsorption of Polymer-Grafted Gold Nanoparticles on Polyelectrolyte Brushes

Designing a functional surface that selectively adsorbs nanoparticles based on their size and shape is essential for developing an advanced adsorption-based, postsynthesis nanoparticle separation device. We demonstrate selective adsorption of larger nanoparticles from solution onto a polyelectrolyte brush by tuning the salt concentration. Specifically, a positively charged polyelectrolyte brush is created by converting pyridine groups of poly(2-vinylpyridine) to n-methylpyridinium groups using methyl iodide. The adsorption kinetics and thermodynamics of poly(ethylene glycol)-grafted, negatively charged gold nanoparticles (diameters of 12 and 20 nm) were monitored as a function of salt concentration. In a salt-free solution, the polyelectrolyte brush adsorbs gold nanoparticles of both sizes. As the salinity increases, the areal number density of adsorbed nanoparticles monotonically decreases and becomes negligible at high salinity. Interestingly, there is an intermediate range of salt concentrations (i.e., 15-20 mM of NaCl) where the decrease in nanoparticle adsorption is more pronounced for smaller particles, leading to size-selective adsorption of the larger nanoparticles. As a further demonstration of selectivity, the polyelectrolyte brush is immersed in a binary mixture of 12 and 20 nm nanoparticles and found to selectively capture larger particles with ∼90% selectivity. In addition, the size distribution of as-synthesized gold nanoparticles, with an average diameter of 12 nm, was reduced by selectively removing larger particles by exposing the solution to polyelectrolyte brush surfaces. This study demonstrates the potential of a polyelectrolyte brush separation device to remove larger nanoparticles by controlling electrostatic interactions between polymer brushes and particles.

Combinatorial Approach to Find Nanoparticle Assemblies with Maximum Surface-Enhanced Raman Scattering

Plasmonic nanoparticles exhibit unique properties that distinguish them from other nanomaterials, including vibrant visible colors, the generation of local electric fields, the production of hot charge carriers, and localized heat emission. These properties are particularly enhanced in the narrow nanogaps formed between nanostructures. Therefore, creating nanogaps in a controlled fashion is the key to achieving a fundamental understanding of plasmonic phenomena originating from the nanogaps and developing advanced nanomaterials with enhanced performance for diverse applications. One of the most effective approaches to creating nanogaps is to assemble individual nanoparticles into a clustered structure. In this study, we present a fast, facile, and highly efficient method for preparing core@satellite (CS) nanoassembly structures using gold nanoparticles of various shapes and sizes, including nanospheres, nanocubes (AuNCs), nanorods, and nanotriangular prisms. The sequential assembly of these building blocks on glass substrates allows us to obtain CS nanostructures with a 100% yield within 4 h. Using 9 different building blocks, we successfully produce 16 distinct CS nanoassemblies and systematically investigate the combinations to search for the highest Raman enhancement. We find that the surface-enhanced Raman scattering (SERS) intensity of AuNC@AuNC CS nanoassemblies is 2 orders of magnitude larger than that of other CS nanoassemblies. Theoretical analyses reveal that the intensity and distribution of the electric field induced in the nanogaps by plasmon excitation, as well as the number of molecules in the interfacial region, collectively contribute to the unprecedentedly large SERS enhancement observed for AuNC@AuNC. This study not only presents a novel assembly method that can be extended to produce many other nanoassemblies but also identifies a highly promising SERS material for sensing and diagnostics through a systematic search process.

Mode-Selective Plasmon Coupling between Au Nanorods and Au Nanospheres

Plasmons play a central role in the properties of gold nanoparticles (AuNPs). Plasmons in a AuNP are influenced by neighboring ones, resulting in hybridized bonding dipole modes and red-shifted resonance peaks in the extinction spectra. Previous studies have mainly focused on plasmon coupling among spherical AuNPs (AuNSs). Here, we explore plasmonic interactions between AuNSs and anisotropic gold nanorods (AuNRs), which have longitudinal (LO) and transverse (TR) plasmon modes. We successfully assemble AuNSs around AuNRs ("AuNR@AuNS"), observing shifts in both the LO and TR modes in the extinction spectra due to directional coupling. Selectively binding AuNSs to the ends of AuNRs ("AuNR═AuNS") leads to predominant plasmon coupling along the LO direction. Our simulation studies reveal that exclusive LO or TR coupling occurs only when AuNSs attach to the center of either the end or the side of AuNRs. This study provides a valuable guideline for selectively exciting plasmons in desired nanogaps when multiple nanogaps are present.

Gamma rays-assisted bacterial synthesis of bimetallic silver-selenium nanoparticles: powerful antimicrobial, antibiofilm, antioxidant, and photocatalytic activities

BACKGROUND

Bimetallic nanoparticles (BNPs) has drawn a lot of attention especially during the last couple of decades. A bimetallic nanoparticle stands for a combination of two different metals that exhibit several new and improved physicochemical properties. Therefore, the green synthesis and design of bimetallic nanoparticles is a field worth exploring.

METHODS

In this study, we present a green synthesis of silver nanoparticles (Ag NPs), selenium (Se) NPs, and bimetallic Ag-Se NPs using Gamma irradiation and utilizing a bacterial filtrate of Bacillus paramycoides. Different Techniques such as UV-Vis., XRD, DLS, SEM, EDX, and HR-TEM, were employed for identifying the synthesized NPs. The antimicrobial and antibiofilm activities of both the Ag/Se monometallic and bimetallic Ag-Se NPs were evaluated against some standard microbial strains including, Aspergillus brasiliensis ATCC16404, Candida albicans ATCC10231, Alternaria alternate EUM108, Fusarium oxysporum EUM37, Escherichia coli ATCC11229, Bacillus cereus ATCC15442, Klebsiella pneumoniae ATCC13883, Bacillus subtilis ATCC15442, and Pseudomonas aeruginosa ATCC6538 as a model tested pathogenic microbes. The individual free radical scavenging potentials of the synthesized Ag NPs, Se NPs, and bimetallic Ag-Se NPs were determined using the DPPH radical scavenging assay. The degradation of methylene blue (MB) dye in the presence of the synthesized Ag NPs, Se NPs, and bimetallic Ag-Se NPs was used to assess their photocatalytic behavior.

RESULTS

According to the UV-Vis. spectrophotometer, the dose of 20.0 kGy that results in Ag NPs with the highest O.D. = 3.19 at 390 nm is the most effective dose. In a similar vein, the optimal dose for the synthesis of Se NPs was 15.0 kGy dose with O.D. = 1.74 at 460 nm. With a high O.D. of 2.79 at 395 nm, the most potent dose for the formation of bimetallic Ag-Se NPs is 15.0 kGy. The recorded MIC-values for Ag-Se NPs were 62.5 µg mL- 1, and the data clearly demonstrated that C. albicans was the organism that was most susceptible to the three types of NPs. The MIC value was 125 µg mL- 1 for both Ag NPs and Se NPs. In antibiofilm assay, 5 µg mL- 1 Ag-Se NPs inhibited C. albicans with a percentage of 90.88%, E. coli with a percentage of 90.70%, and S. aureus with a percentage of 90.62%. The synthesized NPs can be arranged as follows in decreasing order of antioxidant capacity as an antioxidant result: Ag-Se NPs > Se NPs > Ag NPs. The MB dye degradation in the presence of the synthesized Ag NPs, Se NPs, and bimetallic Ag-Se NPs was confirmed by the decrease in the measured absorbance (at 664 nm) after 20 min of exposure to sunlight.

CONCLUSION

Our study provides insight towards the synthesis of bimetallic NPs through green methodologies, to develop synergistic combinatorial antimicrobials with possible applications in the treatment of infectious diseases caused by clinically and industrial relevant drug-resistant strains.

Green Approach for the Simultaneous Synthesis and Separation of Gold Nanoparticles

Gold nanoparticles (AuNPs) have diagnostic and therapeutic applications as they are biocompatible and can be surface-functionalized. The use of organic solvents in the synthesis of AuNPs hampers their applications in the medicinal field. The large-scale production of nanoparticles requires their simultaneous synthesis and separation. Self-assembly of nanoparticles at the fluid-fluid interface facilitates their separation from the bulk and eliminates a downstream processing step. In this work, we exploit this in an aqueous two-phase system (ATPS) to synthesize and separate stable AuNPs. The ATPS was based on polyethylene glycol (PEG) and trisodium citrate dihydrate (citrate) as both these compounds can reduce Au ions. After the synthesis of nanoparticles, using one of the solutes, a complementary solution containing the other solute is added to form a two-phase system to facilitate self-assembly at the interface. The nanoparticles synthesized in different phases are characterized using UV-visible spectroscopy, scanning electron microscopy, and transmission electron microscopy. The AuNPs synthesized using the citrate solution are found to be unstable. Particles synthesized using the ATPS with PEG-600 are trapped at the interface while those using PEG-6000 remain in the bulk. Continuous synthesis and separation of nanoparticles in slug flow in a millichannel are demonstrated as a first step for large-scale controlled synthesis.

Anisotropic hydrogel fabricated by controlled diffusion as a bio-scaffold for the regeneration of cartilage injury

Controlled fabrication of anisotropic materials has become a hotspot in materials science, particularly biomaterials, since the next generation of tissue engineering is based on the application of heterogeneous structures that can simulate the original biological complexity of the body. The current fabrication method of producing anisotropic materials involves expensive and highly specialized equipment, and not every conventional method can be applied to preparing anisotropic materials for corresponding tissue engineering. Anisotropic materials can be easily applied to a problem in tissue engineering: cartilage injury repairing. The articular cartilage consists of four spatially distinct regions: superficial, transitional, deep, and calcified. Each region has a specific extracellular matrix composition, mechanical properties, and cellular organization; this calls for the application of an anisotropic hydrogel. Controlled diffusion, under the assistance of buoyancy, has been considered a generalized method to prepare materials using a gradient. The diffusion of two solutions can be controlled through the difference in their densities. In addition to providing anisotropy, this method realizes the in situ formation of an anisotropic hydrogel, and simplifies the preparation process, freeing it from the need for expensive equipment such as 3D printing and microfluidics. Herein, an anisotropic hydrogel based on a decellularized extracellular matrix is fabricated and characterized. The as-prepared scaffold possessed specific chemical composition, physical properties, and physiological factor gradient. In vitro experiments ensured its biocompatibility and biological effectiveness; further in vivo experiments confirmed its application in the effective regeneration of cartilage injury.

Precise membrane separation of nanoparticles using a microporous polymer containing radially π-conjugated molecular carbocycles

Herein, we report the synthesis of a novel porous polymer, PS2, containing radially π-conjugated carbocycles and a linear phenylene backbone. The PS2-based membrane has a distinct small size cutoff (ca. 2.6 nm) and a major size at ∼1.5 nm for the size-selective separation of nanoparticles.

Rapid separation and purification of lead halide perovskite quantum dots through differential centrifugation in nonpolar solvent

We report the rapid separation and purification of lead halide perovskite quantum dots (QDs) in a nonpolar solvent by using a convenient and efficient differential separation method. Size-selective precipitation effectively separates the perovskite QDs from larger aggregates and provides direct evidence for strong quantum confinement in the photoluminescence (PL). Significantly, the size-selected perovskite QDs are readily well-dispersed in a nonpolar solvent and remain stable in ambient air (humidity > 60%) for >20 days. These enable measurement of the electronic band structure of versatile perovskite QDs as a function of size for the first time. Despite a clear blue-shift of the optical bandgap, the lowest unoccupied molecular orbital (LUMO) readily moves towards the vacuum level while the highest occupied molecular orbital (HOMO) changes slightly, in good agreement with that observed in the quantum size effect tuning of quasi-2D perovskites and colloidal semiconductor QDs. The results demonstrate the possibility of utilizing differential centrifugation as a novel method to attain size-dependent tunability for property-specific perovskite-QD based optoelectronic applications.

Expanding the codes: The development of density-encoded hydrogel microcarriers for suspension arrays

Although suspension array technology (SAT), which uses encoded microspheres, provides high-quality results with versatile applicability for information-intensive bioanalytic applications, current encoding strategies limit the number of codes that can be distinguished. In this paper, we introduce density-encoded hydrogel microcarriers (DMs), which employ the intrinsic density property of biomaterials as a high-capacity coding dimension. Two hydrogel monomers were employed at different ratios to synthesize microgels with distinctive densities. DMs not only can be simultaneously decoded and separated using density gradient centrifugation, but also are compatible with flow cytometry detection. The size and color of DMs have been used as extra coding parameters, to construct an 8 × 2 × 4 (density × size × color) three-dimensionally encoded hydrogel microcarrier library. With aptamer-functionalized DMs (ADMs), we developed a 4-plex protein quantification method for the label-free detection of plasma biomarkers with sub-nanomolar detection limits and good linearities. Moreover, ADMs can be used for label-free naked-eye detection of tumor-derived exosomes. We believe that the simplicity and functionality of DMs will advance the field of suspension arrays and inspire the development of DM-based diagnostic applications.

Ultracentrifugation Techniques for the Ordering of Nanoparticles

A centrifugal field can provide an external force for the ordering of nanoparticles. Especially with the knowledge from in-situ characterization by analytical (ultra)centrifugation, nanoparticle ordering can be rationally realized in preparative (ultra)centrifugation. This review summarizes the work back to the 1990s, where intuitive use of centrifugation was achieved for the fabrication of colloidal crystals to the very recent work where analytical (ultra)centrifugation is employed to tailor-make concentration gradients for advanced materials. This review is divided into three main parts. In the introduction part, the history of ordering microbeads in gravity is discussed and with the size of particles reduced to nanometers, a centrifugal field is necessary. In the next part, the research on the ordering of nanoparticles in analytical and preparative centrifugation in recent decades is described. In the last part, the applications of the functional materials, fabricated from centrifugation-induced nanoparticle superstructures are briefly discussed.

Nonclassical Recrystallization

Applications in the fields of materials science and nanotechnology increasingly demand monodisperse nanoparticles in size and shape. Up to now, no general purification procedure exists to thoroughly narrow the size and shape distributions of nanoparticles. Here, we show by analytical ultracentrifugation (AUC) as an absolute and quantitative high‐resolution method that multiple recrystallizations of nanocrystals to mesocrystals is a very efficient tool to generate nanocrystals with an excellent and so‐far unsurpassed size‐distribution (PDI_c=1.0001) and shape. Similar to the crystallization of molecular building blocks, nonclassical recrystallization removes “colloidal” impurities (i.e., nanoparticles, which are different in shape and size from the majority) by assembling them into a mesocrystal. In the case of nanocrystals, this assembly can be size‐ and shape‐selective, since mesocrystals show both long‐range packing ordering and preferable crystallographic orientation of nanocrystals. Besides the generation of highly monodisperse nanoparticles, these findings provide highly relevant insights into the crystallization of mesocrystals.

Precise size separation of water-soluble red-to-near-infrared-luminescent silicon quantum dots by gel electrophoresis

Gel electrophoresis, which is a standard method for separation and analysis of macromolecules such as DNA, RNA and proteins, is applied for the first time to silicon (Si) quantum dots (QDs) for size separation. In the Si QDs studied, boron (B) and phosphorus (P) are simultaneously doped. Codoping induces a negative potential on the surface of a Si QD and makes it dispersible in water. Si QDs with different B and P concentrations and grown at different temperatures (950 °C-1200 °C) are studied. It is shown that native polyacrylamide gel electrophoresis can separate codoped Si QDs by size. The capability of gel electrophoresis to immobilize size-separated QDs in a solid matrix makes detailed analyses of size-purified Si QDs possible. For example, the photoluminescence (PL) studies of the dried gel of Si QDs grown at 1100 °C demonstrate that a PL spectrum of a Si QD solution with the PL maximum around 1.4 eV can be separated into more than 15 spectra with the PL maximum changing from 1.2 to 1.8 eV depending on the migration distance. It is found that the relationship between the PL peak energy and the migration distance depends on the growth temperature of Si QDs as well as the B and P concentration. For all the samples with different impurity concentrations and grown at different temperatures, a clear trend is observed in the relationship between the full width at half maximum (FWHM) and the peak energy of the PL spectra in a wide energy range. The FWHM increases with the increasing peak energy and it is nearly twice larger than those observed for undoped Si QDs. The large PL FWHM of codoped Si QDs suggests that excitons are further localized in codoped Si QDs due to the existence of charged impurities.

Functional Inks for Printable Energy Storage Applications based on 2 D Materials

Ubiquitous portable electronics and the ever-growing internet-of-things have necessitated the emergence of high-end miniaturized devices as well as associated sophisticated printing technologies. With excellent solution processability and tunable electronic properties, 2 D materials stand as a promising candidate for functional inks that are readily printable for energy-storage devices. In this Review, we outline the significance, status, and challenges that we are facing of the developments of 2 D materials-based functional inks. Then, general ink formulation and basic knowledge of printing techniques together with their rheological requirements and enabled applications in energy storage are introduced, providing guidelines for developing inks that match well with the present printing techniques. Last, but not least, we also propose the perspectives on the development of 2 D materials-based inks for energy-storage applications.

A critical viewpoint on current issues, limitations, and future research needs on micro- and nanoplastic studies: From the detection to the toxicological assessment

Increasing scientific attention on the presence of micro- and nanoplastics (MNPs) in the environments and their potential toxic effects on humans and the ecosystems is evident. Accordingly, the number of publications on this topic has increased substantially from only 5 in 2010 to more than 850 in 2019. Thus, this critical review aimed at providing state-of-the-art information on the existing methods for characterization and detection of MNPs in various matrices, as well as the reported toxic effects of MNPs in both in vivo and in vitro systems, anticipating challenges and providing future needs to improve the current scientific knowledge. We performed a systematic search of recent literature on available methodologies for the characterization/detection of MNPs in different samples, and the summary of such protocols is provided. Also, the existing procedures for in vitro and in vivo toxicity evaluation of MNPs were critically described. The results of our search revealed that quite a great deal of effort had been made to detect, characterize, and quantify the fate and effect of MNPs. However, we are still far from a complete understanding of behaviors of MNPs in the environments and biological systems. Thus, there is a need to advance the existing protocols to improve data accuracy. Besides, more studies that focus on uptake kinetics, accumulation, and biodistribution of MNPs in biological systems are required.

Putting a New Spin on It: Gradient Centrifugation for Analytical and Preparative Applications

Gradient centrifugation is an important technique in chemistry, biology, materials science and engineering. It has big potential beyond the well-known centrifugation for separation of molecules and particles. Various possibilities for special analysis and separation of particles, but also preparative applications like the production of gradient materials and controlled polymerizations exist. In all examples, a gradient of physical and/or chemical properties is generated by centrifugation and used for the further application. In this Concept article, selected examples of gradient centrifugation are presented, to show important developments in the field and discuss their applications, potential, and limitations. It concludes by analysing future trends of gradient centrifugation that are relevant for academic and industrial usage.

Detailed analysis of size-separation of silver nanoparticles by density gradient centrifugation method

In this research, silver nanoparticles were synthesized by chemical precipitation method and stabilized by chitosan biopolymer in the range of 15 to 235 nm. Then, the silver nanoparticles were separated by density gradient centrifugation method at different gradients and centrifuged at various duration and speed. The best separation was done with the gradient chosen at 10%, 20%, 30% and 40% for a duration of 2 h at 6000 rpm. The UV-visible spectra demonstrated the proper synthesis of silver nanoparticles, while FTIR spectrum and XRD data revealed the structure of prepared Ag-NPs. The FESEM and TEM analysis were used to check for the exact shape and size of Ag-NPs, respectively. However, the separation of silver nanoparticles was assessed making use of DLS analysis.

Buoyancy-Driven Gradients for Biomaterial Fabrication and Tissue Engineering

The controlled fabrication of gradient materials is becoming increasingly important as the next generation of tissue engineering seeks to produce inhomogeneous constructs with physiological complexity. Current strategies for fabricating gradient materials can require highly specialized materials or equipment and cannot be generally applied to the wide range of systems used for tissue engineering. Here, the fundamental physical principle of buoyancy is exploited as a generalized approach for generating materials bearing well-defined compositional, mechanical, or biochemical gradients. Gradient formation is demonstrated across a range of different materials (e.g., polymers and hydrogels) and cargos (e.g., liposomes, nanoparticles, extracellular vesicles, macromolecules, and small molecules). As well as providing versatility, this buoyancy-driven gradient approach also offers speed (<1 min) and simplicity (a single injection) using standard laboratory apparatus. Moreover, this technique is readily applied to a major target in complex tissue engineering: the osteochondral interface. A bone morphogenetic protein 2 gradient, presented across a gelatin methacryloyl hydrogel laden with human mesenchymal stem cells, is used to locally stimulate osteogenesis and mineralization in order to produce integrated osteochondral tissue constructs. The versatility and accessibility of this fabrication platform should ensure widespread applicability and provide opportunities to generate other gradient materials or interfacial tissues.

Experimental Assessment and Model Validation on How Shape Determines Sedimentation and Diffusion of Colloidal Particles

Understanding the hydrodynamics of colloids with complex shapes is of equal importance to widespread practical applications and fundamental scientific problems, such as gelation, crystallization, and phase behavior. Building on previous work, we present a comprehensive study of sedimentation, diffusion, intrinsic viscosities, and other shape-dependent quantities of clusters built from spherical nanoparticles. Cluster preparation is accomplished by assembling surface-modified polystyrene particles on evaporating emulsion droplets. This results in supracolloids that exhibit well-defined configurations, which are governed by the number of constituent particles. Sorting into uniform cluster fractions is achieved through centrifugation of the cluster mixture in a density gradient. Sedimentation coefficients are elucidated by differential centrifugal sedimentation. Rotational and translational diffusion of the clusters are investigated by polarized and depolarized dynamic light scattering. The experimental results are compared to data obtained via a bead-shell model suitable for predicting hydrodynamic quantities of particles with arbitrary shapes. The experimental data are in excellent agreement with the predictions from hydrodynamic modeling. The variety of investigated shapes shows the robustness of our approach and provides a complete picture of the hydrodynamic behavior of complex particles.

Density gradient ultracentrifugation for colloidal nanostructures separation and investigation

In this article, we review the advancement in nanoseparation and concomitant purification of nanoparticles (NPs) by using density gradient ultracentrifugation technique (DGUC) and demonstrated by taking several typical examples. Study emphasizes the conceptual advances in classification, mechanism of DGUC and synthesis-structure-property relationships of NPs to provide the significant clue for the further synthesis optimization. Separation, concentration, and purification of NPs by DGUC can be achieved at the same time by introducing the water/oil interfaces into the separation chamber. We can develop an efficient method "lab in a tube" by introducing a reaction zone or an assembly zone in the gradient to find the surface reaction and assembly mechanism of NPs since the reaction time can be precisely controlled and the chemical environment change can be extremely fast. Finally, to achieve the best separation parameters for the colloidal systems, we gave the mathematical descriptions and computational optimized models as a new direction for making practicable and predictable DGUC separation method. Thus, it can be helpful for an efficient separation as well as for the synthesis optimization, assembly and surface reactions as a potential cornerstone for the future development in the nanotechnology and this review can be served as a plethora of advanced notes on the DGUC separation method.

Purification technologies for colloidal nanocrystals

Almost all applications of colloidal nanocrystals require some type of purification or surface modification process following nanocrystal growth. Nanocrystal purification - the separation of nanocrystals from undesired solution components - can perturb the surface chemistry and thereby the physical properties of colloidal nanocrystals due to changes in solvent, solute concentrations, and exposure of the nanocrystal surface to oxidation or hydrolysis. For example, nanocrystal quantum dots frequently exhibit decreased photoluminescence brightness after precipitation from the growth solvent and subsequent redissolution. Consequently, purification is an integral part of the synthetic chemistry of colloidal nanocrystals, and the effect of purification methods must be considered in order to accurately compare and predict the behavior of otherwise similar nanocrystal samples. In this Feature Article we examine established and emerging approaches to the purification of colloidal nanoparticles from a nanocrystal surface chemistry viewpoint. Purification is generally achieved by exploiting differences in properties between the impurities and the nanoparticles. Three distinct properties are typically manipulated: polarity (relative solubility), electrophoretic mobility, and size. We discuss precipitation, extraction, electrophoretic methods, and size-based methods including ultracentrifugation, ultrafiltration, diafiltration, and size-exclusion chromatography. The susceptibility of quantum dots to changes in surface chemistry, with changes in photoluminescence decay associated with surface chemical changes, extends even into the case of core/shell structures. Accordingly, the goal of a more complete description of quantum dot surface chemistry has been a driver of innovation in colloidal nanocrystal purification methods. We specifically examine the effect of purification on surface chemistry and photoluminescence in quantum dots as an example of the challenges associated with nanocrystal purification and how improved understanding can result from increasingly precise techniques, and associated surface-sensitive analytical methods.

Mesoporous Silica Thin Membranes with Large Vertical Mesochannels for Nanosize-Based Separation

Membrane separation technologies are of great interest in industrial processes such as water purification, gas separation, and materials synthesis. However, commercial filtration membranes have broad pore size distributions, leading to poor size cutoff properties. In this work, mesoporous silica thin membranes with uniform and large vertical mesochannels are synthesized via a simple biphase stratification growth method, which possess an intact structure over centimeter size, ultrathin thickness (≤50 nm), high surface areas (up to 1420 m² g^-1 ), and tunable pore sizes from ≈2.8 to 11.8 nm by adjusting the micelle parameters. The nanofilter devices based on the free-standing mesoporous silica thin membranes show excellent performances in separating differently sized gold nanoparticles (>91.8%) and proteins (>93.1%) due to the uniform pore channels. This work paves a promising way to develop new membranes with well-defined pore diameters for highly efficient nanosize-based separation at the macroscale.

Acoustic Separation of Nanoparticles in Continuous Flow

The separation of nanoscale particles based on their differences in size is an essential technique to the nanoscience and nanotechnology community. Here, nanoparticles are successfully separated in a continuous flow by using tilted-angle standing surface acoustic waves. The acoustic field deflects nanoparticles based on volume, and the fractionation of nanoparticles is optimized by tuning the cutoff parameters. The continuous separation of nanoparticlesis demonstrated with a ≈90% recovery rate. The acoustic nanoparticle separation method is versatile, non-invasive, and simple.

Assembly and Electronic Applications of Colloidal Nanomaterials

Artificial solids and thin films assembled from colloidal nanomaterials give rise to versatile properties that can be exploited in a range of technologies. In particular, solution-based processes allow for the large-scale and low-cost production of nanoelectronics on rigid or mechanically flexible substrates. To achieve this goal, several processing steps require careful consideration, including nanomaterial synthesis or exfoliation, purification, separation, assembly, hybrid integration, and device testing. Using a ubiquitous electronic device - the field-effect transistor - as a platform, colloidal nanomaterials in three electronic material categories are reviewed systematically: semiconductors, conductors, and dielectrics. The resulting comparative analysis reveals promising opportunities and remaining challenges for colloidal nanomaterials in electronic applications, thereby providing a roadmap for future research and development.

Low electrical resistivity of a graphene–AgNHPs based ink with a new processing method

AgNHPs was purified with membrane separation-centrifugation cleaning and syntheses the GE–AgNHPs with the low resistivity (2.5 × 10⁻⁶ Ω cm) at low temperatures.

Layer-by-Layer Sorting of Rhenium Disulfide via High-Density Isopycnic Density Gradient Ultracentrifugation

Isopycnic density gradient ultracentrifugation (iDGU) has been widely applied to sort nanomaterials by their physical and electronic structure. However, the commonly used density-gradient medium iodixanol has a finite maximum buoyant density that prevents the use of iDGU for high-density nanomaterials. Here, we overcome this limit by adding cesium chloride (CsCl) to iodixanol, thus increasing its maximum buoyant density to the point where the high-density two-dimensional nanomaterial rhenium disulfide (ReS₂) can be sorted in a layer-by-layer manner with iDGU. The resulting aqueous ReS₂ dispersions show photoluminescence at ∼1.5 eV, which is consistent with its direct bandgap semiconductor electronic structure. Furthermore, photocurrent measurements on thin films formed from solution-processed ReS₂ show a spectral response that is consistent with optical absorbance and photoluminescence data. In addition to providing a pathway for effective solution processing of ReS₂, this work establishes a general methodology for sorting high-density nanomaterials via iDGU.

Sub-monolayer silver loss from large gold nanospheres detected by surface plasmon resonance in the sigmoidal region

Nanosilver becomes labile upon entering the human body or the environment. This lability creates silver species with antimicrobial properties that make nanosilver attractive as active components in many consumer products, wound dressings, and agricultural applications. Because lability depends strongly on morphology, it is imperative to use a material with constant lability throughout kinetic studies so that accurate lability data can be acquired with efficient detection. Here 2.5nm thick silver was coated onto 90-nm diameter gold nanosphere cores and this surface silver layer was gradually removed by either chemical or X-ray radiation etching. The most sensitive region of a sigmoidal surface plasmon resonance (SPR) response as a function of silver thickness was found for the first time between 0.9- and 1.6-nm thick silver, revealing a new nanosilver standard for lability studies. The SPR peak position detection sensitivity is 8nm (SPR peak shift)/nm (silver thickness change) within this steepest region of the plasmon response curve whereas outside, sensitivity drops to 1nm/nm. Since the centroid of SPR profiles can be discerned with 0.25nm precision, the 8-nm/nm sensitivity means it is possible to detect a 0.3-angstrom or sub-monolayer change in silver thickness. The SPR response simulated by discrete dipole approximation (DDA) was an identical sigmoidal function between 0 and 2nm of silver coating. These findings were supported by several other analytical measurements, which confirmed no silver recoating during these etching processes.

Nanometal Skin of Plasmonic Heterostructures for Highly Efficient Near-Field Scattering Probes

In this work, atomic force microscopy probes are functionalized by virtue of self-assembling monolayers of block copolymer (BCP) micelles loaded either with clusters of silver nanoparticles or bimetallic heterostructures consisting of mixed species of silver and gold nanoparticles. The resulting self-organized patterns allow coating the tips with a sort of nanometal skin made of geometrically confined nanoislands. This approach favors the reproducible engineering and tuning of the plasmonic properties of the resulting structured tip by varying the nanometal loading of the micelles. The newly conceived tips are applied for experiments of tip-enhanced Raman scattering (TERS) spectroscopy and scattering-type scanning near-field optical microscopy (s-SNOM). TERS and s-SNOM probe characterizations on several standard Raman analytes and patterned nanostructures demonstrate excellent enhancement factor with the possibility of fast scanning and spatial resolution <12 nm. In fact, each metal nanoisland consists of a multiscale heterostructure that favors large scattering and near-field amplification. Then, we verify the tips to allow challenging nongap-TER spectroscopy on thick biosamples. Our approach introduces a synergistic chemical functionalization of the tips for versatile inclusion and delivery of plasmonic nanoparticles at the tip apex, which may promote the tuning of the plasmonic properties, a large enhancement, and the possibility of adding new degrees of freedom for tip functionalization.

Removal of arsenic from water using nano adsorbents and challenges: A review

Many researchers have used nanoparticles as adsorbents to remove water pollutants including arsenic after modifying the properties of nanoparticles by improving reactivity, biocompatibility, stability, charge density, multi-functionalities, and dispersibility. For arsenic removal, nano adsorbents emerged as the potential alternatives to existing conventional technologies. The present study critically reviewed the past and current available information on the potential of nano adsorbents for arsenic removal from contaminated water and the challenges involved in that. The study discussed the separation and regeneration techniques of nano adsorbents and the performance thereof. The study evaluated the adsorption efficiency of the various nanoparticles based on size of nanoparticles, types of nano adsorbents, method of synthesis, separation and regeneration of the nano adsorbents. The study found that more studies are required on suitable holding materials for the nano adsorbents to improve the permeability and to make the technology applicable at the field condition. The study will help the readers to choose suitable nanomaterials and to take up further research required for arsenic removal using nano adsorbents.

Experimental determination and analysis of gold nanorod settlement by differential centrifugal sedimentation

Direct measurement of the sedimentation coefficients of gold nanorods with a controlled shape factor was performed using differential centrifugal sedimentation (DCS).

Isolation and Characterization of Monodisperse Core-Shell Nanoparticle Fractions

Monodispersity is a key property to control the self-assembly of colloidal particles, and is typically reached after fine-tuning of the synthesis conditions. Monodisperse particle fractions can also be separated from polydisperse suspensions via ultracentrifugation. This paper demonstrates the capability of isolating and characterizing suspensions of core-shell iron oxide-polymer nanoparticles with extremely low polydispersity (p < 0.01) and, thus, of complementing nanoparticle synthetic approaches in the pursuit of highly monodisperse materials.

Single nanoparticle plasmonic sensors

The adoption of plasmonic nanomaterials in optical sensors, coupled with the advances in detection techniques, has opened the way for biosensing with single plasmonic particles. Single nanoparticle sensors offer the potential to analyse biochemical interactions at a single-molecule level, thereby allowing us to capture even more information than ensemble measurements. We introduce the concepts behind single nanoparticle sensing and how the localised surface plasmon resonances of these nanoparticles are dependent upon their materials, shape and size. Then we outline the different synthetic approaches, like citrate reduction, seed-mediated and seedless growth, that enable the synthesis of gold and silver nanospheres, nanorods, nanostars, nanoprisms and other nanostructures with tunable sizes. Further, we go into the aspects related to purification and functionalisation of nanoparticles, prior to the fabrication of sensing surfaces. Finally, the recent developments in single nanoparticle detection, spectroscopy and sensing applications are discussed.