Mechanism of C-F reductive elimination from palladium(IV) fluorides

Design, synthesis and evaluation of bioactivity of peptidomimetics based on chloroalkene dipeptide isosteres

Ample biologically active peptides have been found, identified and modified for use in drug discovery to date. However, several factors, such as low metabolic stability due to proteolysis and non-specific interactions with multiple off-target molecules, might limit the therapeutic use of peptides. To enhance the stability and/or bioactivity of peptides, the development of "peptidomimetics," which mimick peptide molecules, is considered to be idealistic. Hence, chloroalkene dipeptide isosteres (CADIs) was designed, and their synthetic methods have been developed by us. Briefly, in a CADI an amide bond in peptides is replaced with a chloroalkene structure. CADIs might be superior mimetics of amide bonds because the Van der Waals radii (VDR) and the electronegativity value of a chlorine atom are close to those of the replaced oxygen atom. By a developed method of the "liner synthesis", N-tert-butylsulfonyl protected CADIs can be synthesized via a key reaction involving diastereoselective allylic alkylation using organocopper reagents. On the other hand, by a developed method of the "convergent synthesis", N-fluorenylmethoxycarbonyl (Fmoc)-protected carboxylic acids can be also constructed based on N- and C-terminal analogues from corresponding amino acid starting materials via an Evans syn aldol reaction and the Ichikawa allylcyanate rearrangement reaction involving a [3.3] sigmatropic rearrangement. Notably, CADIs can also be applied for Fmoc-based solid-phase peptide synthesis and therefore introduced into bioactive peptides including as the Arg-Gly-Asp (RGD) peptide and the amyloid β fragment Lys-Leu-Val-Phe-Phe (KLVFF) peptide, which are correlated with cell attachment and Alzheimer's disease (AD), respectively. These CADI-containing peptidomimetics stabilized the conformation and enhanced the potency of the cyclic RGD peptide and the cyclic KLVFF peptide.

Benzylic C(sp3)-H fluorination

The selective fluorination of C(sp3)-H bonds is an attractive target, particularly for pharmaceutical and agrochemical applications. Consequently, over recent years much attention has been focused on C(sp3)-H fluorination, and several methods that are selective for benzylic C-H bonds have been reported. These protocols operate via several distinct mechanistic pathways and involve a variety of fluorine sources with distinct reactivity profiles. This review aims to give context to these transformations and strategies, highlighting the different tactics to achieve fluorination of benzylic C-H bonds.

Editing Tetrasubstituted Carbon: Dual C-O Bond Functionalization of Tertiary Alcohols Enabled by Palladium-Based Dyotropic Rearrangement

Many elegant asymmetric syntheses of enantioenriched tertiary alcohols have been developed, and both the transition metal-catalyzed and the radical-based peripheral functionalization of tertiary alcohols have attracted intensive research interest in recent years. However, directly editing tetrasubstituted carbons remains challenging. Herein, we report a Pd-catalyzed migratory fluoroarylation reaction that converts tertiary alcohols to α-fluorinated tertiary alkyl ethers in good to excellent yields. An unprecedented 1,2-aryl/PdIV dyotropic rearrangement along the C-O bond, integrated in a PdII-catalyzed domino process, is key to the dual functionalization of both the hydroxyl group and the tetrasubstituted carbon. This reaction, which is compatible with a broad range of functional groups, generates a tertiary alkyl fluoride and an alkyl-aryl ether functional group with inversion of the absolute configuration at the tetrasubstituted stereocenter.

Late-Stage Diversification of Peptides via Pd-Catalyzed Site-Selective δ-C(sp2)-H Fluorination and Amination

Site-selective C-H fluorination is an attractive strategy for directly transforming inert C-H bonds into C-F bonds, yet it remains a significant challenge. Herein, we have developed an efficient and versatile strategy for site-selective fluorination and amination of phenylalanine-containing peptides via late-stage Pd-catalyzed δ-C(sp2)-H activation, providing a valuable tool for the in situ synthesis of fluorinated indoline scaffolds within peptides.

Diverting the 5-exo-Trig Oxypalladation to Formally 6-endo-Trig Fluorocycloetherification Product through 1,2-O/Pd(IV) Dyotropic Rearrangement

Pd-catalyzed cyclizative functionalization of γ-hydroxyalkenes affords tetrahydrofuran derivatives via a key 5-exo-trig oxypalladation step. Herein, we report a palladium(II)-catalyzed, Selectfluor-mediated formal 6-endo-trig fluorocycloetherification of γ-hydroxyalkenes for the synthesis of functionalized tetrahydropyrans. Mechanistically, an σ-alkyl-Pd(II) intermediate resulting from the 5-exo-trig oxypalladation process is isolated and characterized by X-ray crystallographic analysis. Its oxidation with Selectfluor to Pd(IV) triggers the chemoselective 1,2-O/Pd(IV) dyotropic rearrangement affording, after C-F bond-forming reductive elimination, the tetrahydropyrans with concurrent generation of a tertiary carbon-fluorine bond. The occurrence of this 1,2-positional interchange is further evidenced by trapping the rearranged quaternary C(sp³)-Pd bond by an internal nucleophile that is materialized by the development of a Pd(II)-catalyzed oxidative bis-heterocyclization of alkenes.

Studying Regioisomer Formation in the Pd-Catalyzed Fluorination of Cyclic Vinyl Triflates: Evidence for in situ Ligand Modification

Pd-catalyzed nucleophilic fluorination reactions are important methods for the synthesis of fluoroarenes and fluoroalkenes. However, these reactions can generate a mixture of regioisomeric products that are often difficult to separate. While investigating the Pd-catalyzed fluorination of cyclic vinyl triflates, we observed that the addition of a substoichiometric quantity of TESCF₃ significantly improved the regioselectivity of the reaction. Herein, we report a combined experimental and computational study on the mechanism of this transformation focusing on the role of TESCF₃ . The poor regioselectivity of the reaction in the absence of additives results from the formation of LPd-cyclohexyne complexes (L=biaryl monophosphine ligand). When TESCF₃ is added to the reaction mixture, the generation of the Pd-cyclohexyne complexes is diminished by an unexpected pathway involving the dearomatization of the ligand by nucleophilic attack from a trifluoromethyl anion (CF₃ ^- ).

Regio- and Stereoselective 1,2-Oxyhalogenation of Non-Conjugated Alkynes via Directed Nucleopalladation: Catalytic Access to Tetrasubstituted Alkenes

A catalytic 1,2-oxyhalogenation method that converts non-conjugated internal alkynes into tetrasubstituted alkenes with high regio- and stereoselectivity is described. Mechanistically, the reaction involves a Pd^II /Pd^IV catalytic cycle that begins with a directed oxypalladation step. The origin of regioselectivity is the preference for formation of a six-membered palladacycle intermediate, which is facilitated by an N,N-bidentate 2-(pyridin-2-yl)isopropyl (PIP) amide directing group. Selectivity for C(alkenyl)-X versus -N (X=halide) reductive elimination from the Pd^IV center depends on the identity of the halide anion; bromide and iodide engage in C(alkenyl)-X formation, while intramolecular C(alkenyl)-N reductive elimination occurs with chloride to furnish a lactam product. DFT calculations shed light on the origins of this phenomenon.

Mechanism of the Aryl-F Bond-Forming Step from Bi(V) Fluorides

In this article, we describe a combined experimental and theoretical mechanistic investigation of the C(sp²)–F bond formation from neutral and cationic high-valent organobismuth(V) fluorides, featuring a dianionic bis-aryl sulfoximine ligand. An exhaustive assessment of the substitution pattern in the ligand, the sulfoximine, and the reactive aryl on neutral triarylbismuth(V) difluorides revealed that formation of dimeric structures in solution promotes facile Ar–F bond formation. Noteworthy, theoretical modeling of reductive elimination from neutral bismuth(V) difluorides agrees with the experimentally determined kinetic and thermodynamic parameters. Moreover, the addition of external fluoride sources leads to inactive octahedral anionic Bi(V) trifluoride salts, which decelerate reductive elimination. On the other hand, a parallel analysis for cationic bismuthonium fluorides revealed the crucial role of tetrafluoroborate anion as fluoride source. Both experimental and theoretical analyses conclude that C–F bond formation occurs through a low-energy five-membered transition-state pathway, where the F anion is delivered to a C(sp²) center, from a BF₄ anion, reminiscent of the Balz–Schiemann reaction. The knowledge gathered throughout the investigation permitted a rational assessment of the key parameters of several ligands, identifying the simple sulfone-based ligand family as an improved system for the stoichiometric and catalytic fluorination of arylboronic acid derivatives.

Migrative Carbofluorination of Saturated Amides Enabled by Pd-Based Dyotropic Rearrangement

Directly editing an all-carbon quaternary carbon itself of nonstrained acyclic molecules remains underexploited despite the recent advances in the fields of both C-H and C-C bond activation. Herein, we report a palladium-catalyzed migrative carbofluorination of saturated amides enabled by the activation of both the C(sp³)-H and the C_quaternary-Cσ bonds. In this transformation, the α-quaternary carbon of Weinreb amides is converted to α-tertiary fluoride with concurrent migration of an aryl or an amido group from the α- to β-carbon. DFT calculations indicate that the dyotropic rearrangement proceeds through an unusual anti-selective [2.1.0] bicyclic transition state. The reaction, compatible with a broad range of functional groups, is stereospecific and is applicable to the synthesis of enantioenriched products.

Oxidative Fluorination of Heteroatoms Enabled by Trichloroisocyanuric Acid and Potassium Fluoride

In synthetic method development, the most rewarding path is seldom a straight line. While our initial entry into pentafluorosulfanyl (SF₅) chemistry did not go according to plan (due to inaccessibility of reagents such as SF₅Cl at the time), a “detour” led us to establish mild and inexpensive oxidative fluorination conditions that made aryl‐SF₅ compound synthesis more accessible. The method involved the use of potassium fluoride and trichloroisocyanuric acid (TCICA)—a common swimming pool disinfectant—as opposed to previously employed reagents such as F₂, XeF₂, HF, and Cl₂. Thereafter, curiosity led us to explore applications of TCICA/KF as a more general approach to the synthesis of fluorinated Group 15, 16, and 17 heteroatoms in organic scaffolds; this, in turn, prompted SC‐XRD, VT‐NMR, computational, and physical organic studies. Ultimately, it was discovered that TCICA/KF can be used to synthesize SF₅Cl, enabling SF₅ chemistry in an unexpected way.

Modular Synthesis of Benzocyclobutenes via Pd(II)-Catalyzed Oxidative [2+2] Annulation of Arylboronic Acids with Alkenes

Benzocyclobutenes (BCBs) are highly valuable compounds in organic synthesis, medicinal chemistry, and materials science. However, catalytic modular synthesis of functionalized BCBs from easily accessible starting materials remains limited. We report herein an efficient synthesis of diversely functionalized BCBs by a Pd(II)-catalyzed formal [2+2] annulation between arylboronic acids and alkenes in the presence of N-fluorobenzenesulfonimide (NFSI). An intermolecular carbopalladation followed by palladium oxidation, intramolecular C(sp²)-H activation by a transient C(sp³)-Pd(IV) species, and selective carbon-carbon (C-C) bond-forming reductive elimination from a high-valent five-membered palladacycle is proposed to account for the reaction outcome. Kinetically competent oxidation of alkylPd(II) to alkylPd(IV) species is important to avoid the formation of a Heck adduct. The reaction forges two C-C bonds of the cyclobutene core and is compatible with a wide range of functional groups. No chelating bidentate directing group in the alkene part is needed for this transformation.

Palladacycle-Catalyzed Regioselective Heck Reaction Using Diaryliodonium Triflates and Aryl Iodides

We describe a P-containing palladacycle-catalyzed regioselective Heck reaction of 2,3-dihydrofuran with diaryliodonium salts and aryl iodides to afford 2-aryl-2,5-dihydrofurans and 2-aryl-2,3-dihydrofurans, respectively, in good yields. Mechanistic studies revealed that the oxidative addition of diaryliodonium salts to palladacycles to form Pd(IV) species showed high chemoselectivity and that electron-rich aryl moieties were preferentially transferred to the Heck product. DFT calculations indicated that the regioselectivity-determining step is the reductive elimination reaction rather than the isomerization and reinsertion of Pd(IV)-hydride intermediates into the double bond.

Cross-Coupling through Ag(I)/Ag(III) Redox Manifold

In ample variety of transformations, the presence of silver as an additive or co-catalyst is believed to be innocuous for the efficiency of the operating metal catalyst. Even though Ag additives are required often as coupling partners, oxidants or halide scavengers, its role as a catalytically competent species is widely neglected in cross-coupling reactions. Most likely, this is due to the erroneously assumed incapacity of Ag to undergo 2e^- redox steps. Definite proof is herein provided for the required elementary steps to accomplish the oxidative trifluoromethylation of arenes through Ag^I /Ag^III redox catalysis (i. e. CEL coupling), namely: i) easy Ag^I /Ag^III 2e^- oxidation mediated by air; ii) bpy/phen ligation to Ag^III ; iii) boron-to-Ag^III aryl transfer; and iv) ulterior reductive elimination of benzotrifluorides from an [aryl-Ag^III -CF₃ ] fragment. More precisely, an ultimate entry and full characterization of organosilver(III) compounds [K]⁺ [Ag^III (CF₃ )₄ ]^- (K-1), [(bpy)Ag^III (CF₃ )₃ ] (2) and [(phen)Ag^III (CF₃ )₃ ] (3), is described. The utility of 3 in cross-coupling has been showcased unambiguously, and a large variety of arylboron compounds was trifluoromethylated via [Ag^III (aryl)(CF₃ )₃ ]^- intermediates. This work breaks with old stereotypes and misconceptions regarding the inability of Ag to undergo cross-coupling by itself.

C-C bond activation enabled by dyotropic rearrangement of Pd(IV) species

The weak carbon–metal bond combined with the kinetic inertness of carbon–carbon bond renders the metal catalyzed C–C bond activation to be highly challenging. Most of the reported C–C bond activation methodologies involve the strain-releasing cleavage of small rings to compensate the unfavorable kinetic and thermodynamic penalties associated with the C–C bond cleavage. Here we report that the 1,2-positional interchange of vicinal C–C and C–Pd(IV) bonds (dyotropic rearrangement) can be realized in a stereospecific manner under mild conditions, giving access to quaternary carbon-palladium bonds. An enantioselective synthesis of medicinally relevant fluorinated cyclopentanes, featuring this rearrangement as a key step, has been developed. We anticipate that implementing a Pd-based dyotropic rearrangement in reaction design could provide a new dimension in the development of Pd-catalyzed transformations.

Mediator-Enabled Electrocatalysis with Ligandless Copper for Anaerobic Chan-Lam Coupling Reactions

Simple copper salts serve as catalysts to effect C-X bond-forming reactions in some of the most utilized transformations in synthesis, including the oxidative coupling of aryl boronic acids and amines. However, these Chan-Lam coupling reactions have historically relied on chemical oxidants that limit their applicability beyond small-scale synthesis. Despite the success of replacing strong chemical oxidants with electrochemistry for a variety of metal-catalyzed processes, electrooxidative reactions with ligandless copper catalysts are plagued by slow electron-transfer kinetics, irreversible copper plating, and competitive substrate oxidation. Herein, we report the implementation of substoichiometric quantities of redox mediators to address limitations to Cu-catalyzed electrosynthesis. Mechanistic studies reveal that mediators serve multiple roles by (i) rapidly oxidizing low-valent Cu intermediates, (ii) stripping Cu metal from the cathode to regenerate the catalyst and reveal the active Pt surface for proton reduction, and (iii) providing anodic overcharge protection to prevent substrate oxidation. This strategy is applied to Chan-Lam coupling of aryl-, heteroaryl-, and alkylamines with arylboronic acids in the absence of chemical oxidants. Couplings under these electrochemical conditions occur with higher yields and shorter reaction times than conventional reactions in air and provide complementary substrate reactivity.

Strategy for Selective Csp2-F and Csp2-Csp2 Formations from Organoplatinum Complexes

By changing the parameters of fluorination reaction of bisaryl-platinum(II) complexes, each possible competitive pathway of Ar-Ar and Ar-F formation can be selectively controlled. It was discovered that steric hindrance, type of fluorinating reagent, and temperature of reaction are determinants for Ar-F vs Ar-Ar bond formation pathway from bisaryl-fluoro-platinum(IV) complexes. The combination of bulky ligands such as mesityl with Selectfluor at RT leads to Ar-F bond formation in the presence of possible Ar-Ar formation.

Synthesis of Well-Defined High-Valent Palladium Complexes by Oxidation of Their Palladium(II) Precursors

The last decade has witnessed the rapid development of high-valent Pd-involved organic transformations. This has also led to a steadily growing number of publications concerning the preparation of isolable and characterizable palladium(III) and palladium(IV) complexes. A variety of one-electron and two-electron oxidants have been employed to give access to high-oxidation-state Pd compounds. Undoubtedly, the study of these stoichiometric reactions has great implications for relevant Pd-mediated catalysis. In this minireview, the focus is on the synthetic approaches to structurally determined Pd^III/IV complexes starting from their Pd^II precursors, and the advances in this research area from early 2010 to late 2019 will be highlighted. Chemical oxidations exploiting various oxidizing agents including 1) hypervalent iodine reagents; 2) halogens; 3) electrophilic fluorination reagents; 4) alkyl/aryl halides; 5) ferrocenium salts; 6) peroxides/O₂ ; 7) sulfonyl chlorides; and 8) others are covered. A "greener" electrooxidation manner has also been reviewed.

High-Valent NiIII and NiIV Species Relevant to C-C and C-Heteroatom Cross-Coupling Reactions: State of the Art

Ni catalysis constitutes an active research arena with notable applications in diverse fields. By analogy with its parent element palladium, Ni catalysts provide an appealing entry to build molecular complexity via cross-coupling reactions. While Pd catalysts typically involve a M⁰/M^II redox scenario, in the case of Ni congeners the mechanistic elucidation becomes more challenging due to their innate properties (like enhanced reactivity, propensity to undergo single electron transformations vs. 2e⁻ redox sequences or weaker M–Ligand interaction). In recent years, mechanistic studies have demonstrated the participation of high-valent Ni^III and Ni^IV species in a plethora of cross-coupling events, thus accessing novel synthetic schemes and unprecedented transformations. This comprehensive review collects the main contributions effected within this topic, and focuses on the key role of isolated and/or spectroscopically identified Ni^III and Ni^IV complexes. Amongst other transformations, the resulting Ni^III and Ni^IV compounds have efficiently accomplished: i) C–C and C–heteroatom bond formation; ii) C–H bond functionalization; and iii) N–N and C–N cyclizative couplings to forge heterocycles.

Oxidant speciation and anionic ligand effects in the gold-catalyzed oxidative coupling of arenes and alkynes

The mechanism of the gold-catalyzed oxidative cross-coupling of arenes and alkynes has been studied in detail combining stoichiometric experiments with putative reaction intermediates and DFT calculations. Our data suggest that ligand exchange between the alkyne, the Au(i)-catalyst and the hypervalent iodine reagent is responsible for the formation of both an Au(i)-acetylide complex and a more reactive "non-symmetric" I(iii) oxidant responsible for the crucial Au(i)/Au(iii) turnover. Further, the reactivity of the in situ generated Au(iii)-acetylide complex is governed by the nature of the anionic ligands transferred by the I(iii) oxidant: while halogen ligands remain unreactive, acetato ligands are efficiently displaced by the arene to yield the observed Csp2-Csp cross-coupling products through an irreversible reductive elimination step. Finally, the nature of competitive processes and catalyst deactivation pathways has also been unraveled. This detailed investigation provides insights not only on the specific features of the species involved in oxidative gold-catalyzed cross couplings but also highlights the importance of both ancillary and anionic ligands in the reactivity of the key Au(iii) intermediates.

New Bisoxazoline Ligands Enable Enantioselective Electrocatalytic Cyanofunctionalization of Vinylarenes

In contrast to the rapid growth of synthetic electrochemistry in recent years, enantioselective catalytic methods powered by electricity remain rare. In this work, we report the development of a highly enantioselective method for the electrochemical cyanophosphinoylation of vinylarenes. A new family of serine-derived chiral bisoxazolines with ancillary coordination sites were identified as optimal ligands.

The Fluorination of C-H Bonds: Developments and Perspectives

This Review summarizes advances in fluorination by C(sp² )-H and C(sp³ )-H activation. Transition-metal-catalyzed approaches championed by palladium have allowed the installation of a fluorine substituent at C(sp² ) and C(sp³ ) sites, exploiting the reactivity of high-oxidation-state transition-metal fluoride complexes combined with the use of directing groups (some transient) to control site and stereoselectivity. The large majority of known methods employ electrophilic fluorination reagents, but methods combining a nucleophilic fluoride source with an oxidant have appeared. External ligands have proven to be effective for C(sp³ )-H fluorination directed by weakly coordinating auxiliaries, thereby enabling control over reactivity. Methods relying on the formation of radical intermediates are complementary to transition-metal-catalyzed processes as they allow for undirected C(sp³ )-H fluorination. To date, radical C-H fluorinations mainly employ electrophilic N-F fluorination reagents but a unique Mn^III -catalyzed oxidative C-H fluorination using fluoride has been developed. Overall, the field of late-stage nucleophilic C-H fluorination has progressed much more slowly, a state of play explaining why C-H ¹⁸ F-fluorination is still in its infancy.

Aryl-Fluoride Bond-Forming Reductive Elimination from Nickel(IV) Centers

The treatment of pyridine- and pyrazole-ligated Ni^II σ-aryl complexes with Selectfluor results in C(sp²)-F bond formation under mild conditions. With appropriate design of supporting ligands, diamagnetic Ni^IV σ-aryl fluoride intermediates can be detected spectroscopically and/or isolated during these transformations. These studies demonstrate for the first time that Ni^IV σ-aryl fluoride complexes participate in challenging C(sp²)-F bond-forming reductive elimination to yield aryl fluoride products.

Direct intramolecular carbon(sp2)-nitrogen(sp2) reductive elimination from gold(iii)

The reactivity of bidentate AuIII-Cl species, [(C^N)AuCl2], with a bisphosphine or carbon donor ligands results in reductive elimination. Combined experimental and computational investigations lead to the first evidence of a direct intramolecular C(sp2)-N(sp2) bond formation from a monomeric [(C^N)AuCl2] gold(iii) complex. We show that bidentate ligated Au(iii) systems bypass transmetallation to form C(sp2)-N(sp2) species and NHC-Au-Cl. Mechanistic investigations of the reported transformation reveal a ligand-induced reductive elimination via a key AuIII intermediate. Kinetic studies of the reaction support a second-order rate process.

Fluorination of organoboron compounds

This review presents the methods available for the fluorination and radiofluorination of aromatic and aliphatic organoboron compounds.

Controlling Pd(IV) reductive elimination pathways enables Pd(II)-catalysed enantioselective C(sp3)-H fluorination

The development of a Pd(II)-catalyzed enantioselective fluorination of C(sp³)–H bonds would offer a new approach to making chiral organofluorines. However, such a strategy is particularly challenging because of the difficulty in differentiating prochiral C(sp³)–H bonds through Pd(II)-insertion, as well as the sluggish reductive elimination involving Pd–F bonds. Here, we report the development of a Pd(II)-catalyzed enantioselective C(sp³)–H fluorination using a chiral transient directing group strategy. In this work, a bulky, amino amide transient directing group was developed to control the stereochemistry of C–H insertion step and selectively promote C(sp³)–F reductive elimination pathway from Pd(IV)–F intermediate. Stereochemical analysis revealed that while the desired C(sp³)–F formation proceeds via an inner-sphere pathway with retention of configuration, the undesired C(sp³)–O formation occurs through an S_N2-type mechanism. The elucidation of the dual mechanism allows us to rationalize the profound ligand effect on controlling reductive elimination selectivity from high-valent Pd species.

Recent advances in the synthesis of functionalised monofluorinated compounds

Over the past few years, we have tackled the synthesis of interesting monofluorinated organic molecules, such as: dihydronaphthalene derivatives, β-fluoro sulfones and related carbonyl compounds, fluorohydrins and allylic alcohols.