Real-Time Fluorescence In Situ Visualization of Latent Fingerprints Exceeding Level 3 Details Based on Aggregation-Induced Emission

Instant in situ highlighting of latent fingerprints by a green fluorescent probe based on aggregation-induced emission

Fluorescence sensing of latent fingerprints (LFPs) has gained extensive attention due to its high sensitivity, non-destructive testing, low biotoxicity, ease of operation, and the potential for in situ visualization. However, the realization of in situ visualization of LFPs especially with green emission and rapid speed is still a challenge. Herein, we synthesized an amphibious green-emission AIE-gen TPE-NI-AOH (PLQY = 62%) for instant in situ LFP detecting, which integrates the excellent fluorescence properties of naphthalimide (NI) with a hydrophilic head and the AIE character as well as the donating property of tetraphenylethene (TPE). TPE-NI-AOH in ethanol/water binary solvent was used as an environmentally friendly LFP developer and achieved in situ green-fluorescence visualization of LFPs. The fluorescence signal achieves its 60% saturated intensity in 0.37 s and nearly 100% in 2.50 s, which is an instant process for the naked eye. Moreover, level 3 details and super-resolution images of LFPs could be observed clearly. Besides, the TPE-NI-AOH developer could be stored for at least 6 months, suitable for long-term storage. This instant in situ highlighting method does not require post-processing operations, providing a more convenient, rapid, and efficient detection method of LFPs. This work would inspire the further advancement of fluorescent sensors for fingerprint imaging.

Quaternary phosphonium AIEgens nanoparticles as innovative agents for developing latent fingerprints

Quaternary phosphonium salts, a significant category of organophosphorus compounds, have garnered substantial attention from chemists due to their wide range of applications across various research areas. These compounds are utilized in organic synthesis, catalysis, medicinal chemistry, natural materials, and coordination chemistry. Their versatility and effectiveness in these fields make them valuable tools in scientific research. Despite their extensive use in various applications, the potential of quaternary phosphonium compounds as fluorescent agents for revealing latent fingerprints (LFPs) remains largely unexplored, presenting an exciting opportunity for further research and development in forensic science. In this study, we designed molecules that combine the aggregation-induced emission (AIE) chromophore with triphenylphosphine to create a series of novel AIE amphiphiles, namely TPP1, TPP2, and TPP3. Through precise adjustment of the carbon chain length between the phenoxy group and the terminal triphenylphosphine, we were able to finely tune the nanostructures and hydrophobicity of the materials. TPP3 emerged as the optimal candidate, possessing the ideal particle size and hydrophobicity to effectively bind to LFPs, thus enabling efficient fingerprint visualization with enhanced fluorescence upon aggregation. Our findings introduce an innovative approach to fingerprint visualization, offering high selectivity, superior imaging of level 3 structures, and long-term effectiveness (up to 30 days). Additionally, TPP3's outstanding performance in imaging level 3 structures of LFPs is beneficial for analyzing incomplete LFPs and identifying individuals. By significantly improving the detection and analysis of LFPs, this approach ensures more accurate and reliable identification, making it invaluable for forensic investigations and security measures. The adaptability of these compounds to various fingerprint surfaces highlights their potential in diverse practical applications, enhancing their utility in both forensic science and security fields. This versatility allows for precise fingerprint visualization across different scenarios, making them a critical tool for advancing biometric and security technologies.

Bridged triphenylamine-based fluorescent probe for selective and direct detection of HSA in urine

Human serum albumin (HSA) serves as a crucial indicator for therapeutic monitoring and biomedical diagnosis. In this study, a near infrared (NIR) fluorescent probe, termed BTPA, characterized a donor-π-acceptor (D-π-A) structure based on bridged triphenylamine (TPA) was developed. BTPA exhibited outstanding sensitivity and selectivity towards HSA among various analysts, with a remarkable 50-fold fluorescence enhancement with a significant Stokes shift (∼190 nm) and a wide linear detection range of 0-20 μM of HSA. Especially, BTPA displayed selectivity for discrimination of HSA from BSA. Job's Plot analysis suggested a 1:1 stoichiometry for the formation of the BTPA-HSA complex. Displacement assays and molecular docking demonstrated that BTPA binds to subdomain IB of HSA which could effectively avoid interference from most drugs. Besides, BTPA have good biocompatibility and could detect of exogenous HSA with a relatively low fluorescence background. For practical applications, BTPA was tested for detecting HSA levels in human urine without any pretreatment, showing detection capability in the range of 0-10 μM with a fast response (<30 s), a limit of detection (LOD) of 0.12 μM and good recoveries (81.7-92.9 %), highlighting the high performance of bridged triphenylamine-based probe BTPA.

Aggregation-induced emission luminogens for latent fingerprint detection

For over a century, fingerprints have served as a pivotal tool for identification of individuals owing to their enduring characteristics and easily apparent features, particularly in the realm of criminal investigations. Latent fingerprints (LFPs) are "invisible fingerprints" that are most commonly available at crime scenes and require a rapid, selective, sensitive, and convenient method for detection. However, existing fingerprint development techniques harbour limitations, prompting the exploration of novel approaches that prioritize investigator safety and environmental sustainability. Leveraging the unique photophysical properties of aggregation-induced emission luminogens (AIEgens) has emerged as a promising strategy for on-site analysis of LFP visualization. In this highlight, we have presented a comparative analysis of various AIEgens (organic compounds, metal complexes, nanoparticles, and polymers) for the development and detection of LFPs. Through this examination, insights into the efficiency and potential applications of AIE-based fingerprint development techniques are provided. In addition, several strategies have been proposed for circumventing the limitations of existing AIEgens. We hope that this highlight article will encourage more researchers to investigate AIEgens in LFP detection, contributing to forensic science.

Supramolecular Sequential Light-Harvesting Systems for Constructing White LED Device and Latent Fingerprint Imaging

The fabrication of supramolecular light-harvesting systems (LHS) with sequential energy transfer is of significance in utilizing light energy. In this study, we report the non-covalent self-assembly of a sequential LHS by pillar[5]arene-based host-guest interaction in water and its applications in white light-emitting diode (LED) device and latent fingerprint imaging. The host-guest complex WP5 ⊃ ${ \supset }$ G self-assembles into nanoparticles in water and shows enhanced aggregation-induced emission (AIE) effect. The nanoparticles can be further used to construct sequential LHS with fluorescent dyes 4,7-di(2-thienyl)-benzo[2,1,3]thiadiazole (DBT) and sulforhodamine 101 (SR101). Impressively, the system shows white-light emission when the molar ratio of WP5 ⊃ ${ \supset }$ G/DBT/SR101 is 1100/2/16. The material can be coated on a LED bulb to achieve white-light emission. In addition, the sequential LHS exhibit multicolor fluorescence including red emission, which have been successfully applied to high-resolution imaging of latent fingerprints. Therefore, we demonstrated a general strategy for the construction of sequential LHS in water based on macrocyclic host-guest interaction and explored its multi-functional applications in white-light LED device and imaging of latent fingerprints, which will promote future development and application of supramolecular LHSs.

Particle Size-Tunable Polydopamine Nanoparticles for Optical and Electrochemical Imaging of Latent Fingerprints on Various Surfaces

Powder dusting method is the most widely used approach due to its low cost, simplicity, minimal instrument dependence, and extensive applicability for developing latent fingerprints (LFPs). Herein, a novel optical and electrochemical dual-mode method for high-resolution LFP enhancement has been explored based on size-tunable polydopamine (PDA) nanoparticles (NPs) and scanning electrochemical microscopy (SECM). Dark PDAs rich in functional groups and negative charges can combine with the residues of LFPs on various surfaces with high sensitivity and selectivity to realize high-resolution visual fingerprint physical patterns on various porous and nonporous substrates with light color. However, optical visualization is not feasible for LFPs on dark or multicolored surfaces. Fortunately, based on the differences in electrochemical reactivity between ridges and furrows caused by the conductivity and reducibility of PDA powders, SECM can serve as a powerful supplement to optical methods to effectively overcome background color interference and distinctly display fingerprint patterns. Intriguingly, it is noteworthy that the binding amount and particle size of PDA powder significantly affected the optical and electrochemical visualization of LFPs: more powder binding amounts provided darker ridges in optical, and more surface reaction sites (larger powder binding mass at the same particle size or smaller particle size at the same mass) provided higher currents of ridges in electrochemical imaging. It demonstrates that the PDA powder as a dual-mode developer for LFPs offers a promising method for individual identification in forensics.

Reactive oxygen species-responsive nano-platform with dual-targeting and fluorescent lipid-specific imaging capabilities for the management of atherosclerotic plaques

Atherosclerosis (AS), a pathological cause of cardiovascular disease, results from endothelial injury, local progressive inflammation, and excessive lipid accumulation. AS plaques rich in foam cells are prone to rupture and form thrombus, which can cause life-threatening complications. Therefore, the assessment of atherosclerotic plaque vulnerability and early intervention are crucial in reducing the mortality rates associated with cardiovascular disease. In this work, A fluorescent probe FC-TPA was synthesized, which switches the fluorescence state between protonated and non-protonated, reducing background fluorescence and enhancing imaging signal-to-noise ratio. On this basis, FC-TPA is loaded into cyclodextrin (CD) modified with phosphatidylserine targeting peptide (PTP) and coated with hyaluronic acid (HA) to construct the intelligent responsive diagnostic nanoplatform (HA@PCFT). HA@PCFT effectively targets atherosclerotic plaques, utilizing dual targeting mechanisms. HA binds strongly to CD44, while PTP binds to phosphatidylserine, enabling nanoparticle aggregation at the lesion site. ROS acts as a smart release switch for probes. Both in vitro and in vivo evaluations confirm impressive lipid-specific fluorescence imaging capabilities of HA@PCFT nanoparticles (NPs). The detection of lipid load in atherosclerotic plaque by fluorescence imaging will aid in assessing the vulnerability of atherosclerotic plaque. STATEMENT OF SIGNIFICANCE: Currently, numerous fluorescent probes have been developed for lipid imaging. However, some challenges including inadequate water solubility, nonspecific distribution patterns, and fluorescence background interference, have greatly limited their further applications in vivo. To overcome these limitations, a fluorescent molecule has been designed and synthesized, thoroughly investigating its photophysical properties through both theoretical and experimental approaches. Interestingly, this fluorescent molecule exhibits the reversible fluorescence switching capabilities, mediated by hydrogen bonds, which effectively mitigate background fluorescence interference. Additionally, the fluorescent molecules has been successfully loaded into nanocarriers functionalized with the active targeting abilities, which has significantly improved the solubility of the fluorescent molecules and reduced their nonspecific distribution in vivo for an efficient target imaging in atherosclerosis. This study provides a valuable reference for evaluating the performance of such fluorescent dyes, and offers a promising perspective on the design of the target delivery systems for atherosclerosis.

Hydrochromic and piezochromic dual-responsive optical film derived from poloxamer and ethyl cellulose for visual fingerprints identification

Developing new materials that could identify fingerprint using the naked eye and observe the level 3 microscopic details is challenging. Here, we designed a novel hydrochromic and piezochromic dual-responsive optical film, which achieved the visual transparency transition. The performances of hydrochromic and piezochromic responses from high transparency to opaque whiteness were attributed to the introduction of poloxamer. The hygroscopic swelling of the disordered micelles led to light scattering, causing the hydrochromic response. The piezochromic response may be ascribed to the microcracks in the fragments of poloxamer crystals, which changed the refractive index of light. The fascinating combination of hydrochromic and piezochromic response was effectively applied in fingerprint identification. Hydrochromic response accurately recognized sweat pores, and piezochromic response could gradually reveal the ridges and valleys according to the different color of imprinted fingerprints. The film could identify fake fingerprints based on the differences in sweat pores between fake fingerprints and living fingers. More importantly, the film could easily detected not only the clear ridges but also the detailed sweat pores using the naked eye, indicating that the film has profound research significance in fingerprint analysis and liveness fingerprint detection.

Development research of latent fingermarks based on aggregation-induced emission technique

Fingerprints hold evidential value for individual identification; a sensitive, efficient, and convenient method for visualizing latent fingermarks (LFMs) is of great importance in the field of crime scene investigation. In this study, we proposed an aggregation-induced emission atomization technique (AIE-AT) to obtain high-quality fingermark images. Six volunteers made over 1566 fingerprint samples on 17 different objects. The quality of fingermark development was evaluated using grayscale analysis for quantitative assessment, combining the fluency of fingermark ridges and the degree of level 2 and level 3 features. Both qualitative and quantitative methods were employed to explore the effectiveness of AIE molecule C27H19N3SO in developing fingermarks, its applicability to objects, and its individual selectivity. Additionally, the stability of the AIE molecule was examined. Comparative experimental results demonstrated the high stability of the AIE molecule, making it suitable for long-term preservation. The grayscale ratio of the ridges and furrows was at least 2, with high brightness contrast, the level 2 and level 3 features were clearly observable. The AIE-AT proved to be effective for developing fingermarks on nonporous, porous, and semiporous objects. It exhibited low selectivity on suspects who leave fingermarks and showed better development effects on challenging objects, as well as efficient extraction capability for in situ fingermarks. In summary, AIE-AT can efficiently develop latent fingermarks on common objects and even challenging ones. It locates the latent fingermarks for further accurate extraction of touch exfoliated cells in situ, providing technical support for the visualization of fingermarks and the localization for extraction of touch DNA.

Recent advances in super-resolution optical imaging based on aggregation-induced emission

Super-resolution imaging has rapidly emerged as an optical microscopy technique, offering advantages of high optical resolution over the past two decades; achieving improved imaging resolution requires significant efforts in developing super-resolution imaging agents characterized by high brightness, high contrast and high sensitivity to fluorescence switching. Apart from technical requirements in optical systems and algorithms, super-resolution imaging relies on fluorescent dyes with special photophysical or photochemical properties. The concept of aggregation-induced emission (AIE) was proposed in 2001, coinciding with unprecedented advancements and innovations in super-resolution imaging technology. AIE probes offer many advantages, including high brightness in the aggregated state, low background signal, a larger Stokes shift, ultra-high photostability, and excellent biocompatibility, making them highly promising for applications in super-resolution imaging. In this review, we summarize the progress in implementation methods and provide insights into the mechanism of AIE-based super-resolution imaging, including fluorescence switching resulting from photochemically-converted aggregation-induced emission, electrostatically controlled aggregation-induced emission and specific binding-regulated aggregation-induced emission. Particularly, the aggregation-induced emission principle has been proposed to achieve spontaneous fluorescence switching, expanding the selection and application scenarios of super-resolution imaging probes. By combining the aggregation-induced emission principle and specific molecular design, we offer some comprehensive insights to facilitate the applications of AIEgens (AIE-active molecules) in super-resolution imaging.

An AIEE-active Triphenylethylene Derivative with Photoresponsive Character for Latent Fingerprints Detection via a Simple Soaking Method

Latent fingerprints (LFPs) is one of the most important physical evidence in the criminal scene, playing an important role in forensic investigations. Therefore, developing highly sensitive and convenient materials for the visualization of LFPs is of great significance. We designed and synthesized an organic fluorescent molecule TP-PH with aggregation-induced enhanced emission (AIEE) activity. By simply soaking, blue fluorescent images with high contrast and resolution are readily developed on various surfaces including tinfoil, steel, glass and plastic. Remarkably, LFPs can be visualized within 5 min including the first-, second- and tertiary-level details. In addition, TP-PH exhibits interesting photoactivated fluorescence enhancement properties. Under irradiation of 365 nm UV light with a power density of 382 mW/cm2, the fluorescence quantum yield displays approximately 21.5-fold enhancement. Mechanism studies reveals that the photoactivated fluorescence is attributed to the irreversible cyclodehydrogenation reactions under UV irradiation. This work provides a guideline for the design of multifunctional AIEE fluorescent materials.

A ratiometric fluorescent indicator-displacement assay for on-site determination and intracellular imaging of nitroxinil

Nitroxinil (NIT) is a widely using veterinary medicine to protect cattle and sheep yet may threaten human health when ingested through food chain. Developing fluorescent analytical methods in ratiometric manners was essential for the on-site detection and in-situ monitoring of NIT but still challenging. Here, we improved the indicator-displacement assay (IDA)-based method and designed the first ratiometric fluorescent probe for NIT by using an albumin host and an Aggregation-induced emission (AIE) guest. This probe exhibited fast response (10 s), high sensitivity (limit of detection: 4.6 ppb), good selectivity (over twelve medicines) and eye-discriminable fluorescent color change (green-red) upon responding to NIT. Based on these properties, this probe enabled quantitative determination of NIT in real food samples, on-site analysis via a paper-based test strip, and fluorescence imaging of NIT in living cells.

De Novo Green Fluorescent Protein Chromophore-Based Probes for Capturing Latent Fingerprints Using a Portable System

Rapid visualization of latent fingerprints, preferably at their point of origin, is essential for effective crime scene evaluation. Here, we present a new class of green fluorescent protein chromophore-based fluorescent dyes (LFP-Yellow and LFP-Red) that can be used for real-time visualization of LFPs within 10 s. Compared with traditional chemical reagents for LFPs, these fluorescent dyes are completely water-soluble, exhibit low cytotoxicity, and are harmless to users. Level 1-3 details of the LFPs could be clearly revealed through "off-on" fluorescence signal readout. Additionally, the fluorescent dyes were constructed based on an imidazolinone core and so do not contain pyridine groups or metal ions, which ensures that the DNA is not contaminated during extraction and identification after the LFPs are treated with the dyes. Combined with our as-developed portable system for capturing LFPs, LFP-Yellow and LFP-Red enabled the rapid capture of LFPs. Therefore, these green fluorescent protein chromophore-based probes provide an approach for the rapid identification of individuals who were present at a crime scene.

MXene-Coated Ion-Selective Electrode Sensors for Highly Stable and Selective Lithium Dynamics Monitoring

Lithium holds immense significance in propelling sustainable energy and environmental systems forward. However, existing sensors used for lithium monitoring encounter issues concerning their selectivity and long-term durability. Addressing these challenges is crucial to ensure accurate and reliable lithium measurements during the lithium recovery processes. In response to these concerns, this study proposes a novel approach involving the use of an MXene composite membrane with incorporated poly(sodium 4-styrenesulfonate) (PSS) as an antibiofouling layer on the Li+ ion selective electrode (ISE) sensors. The resulting MXene-PSS Li+ ISE sensor demonstrates exceptional electrochemical performance, showcasing a superior slope (59.42 mV/dec), lower detection limit (10-7.2 M), quicker response time (∼10 s), higher selectivity to Na+ (-2.37) and K+ (-2.54), and reduced impedance (106.9 kΩ) when compared to conventional Li+ ISE sensors. These improvements are attributed to the unique electronic conductivity and layered structure of the MXene-PSS nanosheet coating layer. In addition, the study exhibits the long-term accuracy and durability of the MXene-PSS Li+ ISE sensor by subjecting it to real wastewater testing for 14 days, resulting in sensor reading errors of less than 10% when compared to laboratory validation results. This research highlights the great potential of MXene nanosheet coatings in advancing sensor technology, particularly in challenging applications, such as detecting emerging contaminants and developing implantable biosensors. The findings offer promising prospects for future advancements in sensor technology, particularly in the context of sustainable energy and environmental monitoring.

Multifunctional Eu(III)-modified HOFs: roxarsone and aristolochic acid carcinogen monitoring and latent fingerprint identification based on artificial intelligence

The exploration of multifunctional materials and intelligent technologies used for fluorescence sensing and latent fingerprint (LFP) identification is a research hotspot of material science. In this study, an emerging crystalline luminescent material, Eu3+-functionalized hydrogen-bonded organic framework (Eu@HOF-BTB, Eu@1), is fabricated successfully. Eu@1 can emit purple red fluorescence with a high photoluminescence quantum yield of 36.82%. Combined with artificial intelligence (AI) algorithms including support vector machine, principal component analysis, and hierarchical clustering analysis, Eu@1 as a sensor can concurrently distinguish two carcinogens, roxarsone and aristolochic acid, based on different mechanisms. The sensing process exhibits high selectivity, high efficiency, and excellent anti-interference. Meanwhile, Eu@1 is also an excellent eikonogen for LFP identification with high-resolution and high-contrast. Based on an automatic fingerprint identification system, the simultaneous differentiation of two fingerprint images is achieved. Moreover, a simulation experiment of criminal arrest is conducted. By virtue of the Alexnet-based fingerprint analysis platform of AI, unknown LFPs can be compared with a database to identify the criminal within one second with over 90% recognition accuracy. With AI technology, HOFs are applied for the first time in the LFP identification field, which provides a new material and solution for investigators to track criminal clues and handle cases efficiently.

Simple Donor-π-Acceptor Compounds Exhibiting Aggregation-Induced Emission as Hidden Fingerprints Detecting Agents

Latent fingerprints are a significant carrier of information for a court expert. To detect this type of forensic trace, what is necessary is a method that is easy to use, compact, and versatile. The research aimed to investigate the physicochemical properties of luminescent substances of donor-π-acceptor systems in terms of their potential use in detecting hidden fingerprints. During the research, a group of fluorene compounds consisting of the (-CH=C(CN)(COOR)) moiety was designed and successfully synthesized. The optical, electrochemical, and aggregation-induced emission properties were studied. The aggregation-induced emission of compounds has been studied in the mixture of THF (as a good solvent) and water (as a poor solvent) with different water fractions ranging from 0% to 99%. Due to the molecular structure, substances showed different affinities to organic traces. As a result, it was noticed that all compounds showed the AIE phenomenon, while during tests on latent fingerprints, it was observed that two substances had particularly forward-looking features in this field.

Coordination effect enhanced visualization of latent fingerprint with Eu (TTA)3phen-SiO2 microspheres

Latent fingerprint (LFP) powders are crucial in the detection of LFPs in forensic science. However, it is often plagued by poor image resolution and low contrast. Herein, enhanced LFP fluorescence (FL) visualizations are achieved by doping Eu(III) coordination compound Eu(TTA)3phen directly into SiO2 microspheres instead of Eu(III) ions. Using the synthesized Eu(TTA)3phen-SiO2 microspheres, the fine characteristic structure of LFP can be seen and recognized under 365 nm irradiation, up to Level 3. However, the Eu3+-SiO2 microspheres were difficult to recognize the Level 2,3 fingerprint structure. The difference between the ridge and furrow gray values of Eu(TTA)3phen-SiO2 microspheres is 2.1 times that of Eu3+-SiO2 microspheres. The coordination effect increased the asymmetry around Eu(III) ions, resulting in the ultrasensitive 5D0→7F2 transition, thus increasing the FL intensity, and the uniform doping of the Eu(III) coordination compound into SiO2 also reduced the surface FL quenching due to shielding from oxygen. Under this dual effect, the LFP performance of Eu(TTA)3phen-SiO2 microspheres has been significantly improved. We believe that this novel and easy LFP visualization method is a promising routine in specific target detection including criminal investigation, customhouse check-in, and drug control.

High-definition and robust visualization of latent fingerprints utilizing ultrabright aggregation-induced emission of iridium developer

Creation of AIEgens with high brightness is compactly related to acquiring optimum AIE capabilities and still faces challenges. This study proposes an ingenious structurally regulative approach for preparing ultrabright AIEgens, taking iridium complexes as the model. The incremental rotational activity of substituents obtained by fine adjustment of the stereoscopic configuration efficaciously activates the AIE of iridium complexes and synchronously imparts high-brightness luminescence. Subsequently, benefitting from the ultrabright AIE, high-resolution visualization of latent fingerprints (LFPs) is achieved on diverse substrates by transient immersion in a solution of the AIE-active iridium complex (Ir3) for 60 s. The LFPs stained by Ir3 are integral and distinct enough to possess level 1-3 detail features, which allow precisely realizing personal identification. The LFP photograph emerges inconspicuous attenuation of contrast when aged under ambient light for 10 days and then being continuously irradiated with high-power ultraviolet light for 1 h, reflecting extraordinary aging resistance. Notably, the ultrabright AIE of Ir3 with room-temperature phosphorescence feature successfully achieves enhanced visualization of local fingerprint details with ultrahigh contrast. This LFP visualization protocol based on the ultrabright AIEgens is practical and provides a reliable solution for forensic investigations in actual scenarios.

Natural protoberberine alkaloid-montmorillonite nanocomposite powders with AIE features for visualizing high-resolution latent fingerprints

Real-time and in-situ fluorescence visualization technologies have attention to in the forensic analysis of latent fingerprints (LFPs). The fingerprint powders with high performance and biocompatibility are essential for imaging LFPs with high definition and safety. In this work, five quaternary protoberberine alkaloid (QPA) derivatives were analyzed with reorganization energy and four-point calculations to explain the relationship between the substituent effect and luminescent properties and further resolve the luminous behaviors of four QPA-based natural products in solution. Thanks to the restriction of the intramolecular motions mechanism, aggregation-induced emission (AIE) active BBC nanoaggregates could sensitively detect explosive analog, 2,4,6-trinitrophenol, at a nanomolar level (9.8 nM of detection limit). Combined with natural montmorillonite (MMT) mineral powders, three levels of details for fingerprints were successfully imaged with solid-luminous BBC/MMT nanocomposites. The insight into the substituted effect of alkoxy groups on the QPA framework not only provides a new concept to design rotor-free AIE luminogens but also expands natural products and their nanocomposites into LFP and detection applications.

A reversible CHEF-based NIR fluorescent probe for sensing Hg2+ and its multiple application in environmental media and biological systems

Hg²⁺ poses a great threat to human health and the environment due to its bioaccumulation and permanent damage. Herein, a reversible CHEF-based near-infrared fluorescent probe 2-(3-((E)-4-((E)-4-(diethylamino)-2- hydroxybenzylidene)amino)styryl)-5,5-dimethylcyclohex-2-en-1-ylidene)propanedinitrile (DHEY) capable of specifically recognizing Hg²⁺ was constructed. DHEY exhibits advantages of large Stokes shift (157 nm), excellent selectivity, high sensitivity (LOD = 3.2 μg/L), and fast response efficiency (<3 min). Interestingly, DHEY can also realize rapid and effective detection of Hg²⁺ after being recycled 7 times. The successful recovery of trace Hg²⁺ in different environmental water samples fully demonstrates the potential of DHEY for actual applications. In particular, DHEY enables real-time observation of the distribution and translocation pattern of exogenous Hg²⁺ in HeLa cells and zebrafish. This work provides important theoretical support for investigating the fate of heavy metal ions in the environment using fluorescence techniques.

A dual-function probe with aggregation-induced emission feature for Cu2+ detection and chemodynamic therapy

Herein, a fluorescent probe (named TPACP) with aggregation-induced emission (AIE) feature was developed and utilized for the selective detection of Cu²⁺ with high sensitivity and fast-response. The resultant TPACP@Cu²⁺ complexes from coordination of TPACP with Cu²⁺ can also be potentially applied for chemodynamic and photodynamic therapy.

Highly efficient ferric ion sensing and high resolution latent fingerprint imaging based on fluorescent silicon quantum dots

Expanding the application of silicon based luminescent materials is a fast-growing interdisciplinary field. Herein, a novel fluorescent bifunctional probe based on silicon quantum dots (SiQDs) for highly sensitive Fe³⁺ sensing and high-resolution latent fingerprint (LFP) imaging was subtly devised. The SiQD solution was mildly prepared using 3-aminopropyl trimethoxysilane as the silicon source and sodium ascorbate as the reductant, showing green emission at 515 nm under UV irradiation with a quantum yield of 19.8%. As a highly sensitive fluorescent sensor, the SiQD was demonstrated to have a highly selective quenching with Fe³⁺ in the concentration range of 2-1000 μM with the LOD of 0.086 μM in water. The quenching rate constant and association constant of the SiQDs-Fe³⁺ complex was calculated to be 1.05 × 10¹² mol/s and 6.8 × 10³ L/mol, respectively, suggesting a static quenching effect between them. Moreover, to achieve high-resolution LFP imaging, a novel SiO₂@SiQDs composite powder was further fabricated. The SiQDs were covalently anchored on the surface of silica nanospheres to conquer aggregation-caused quenching for the high-solid fluorescence. In the demonstration of LFP imaging, this silicon based luminescent composite exhibited high developing sensitivity, high selectivity and high contrast, indicating its practical value as a fingerprint developer at crime scenes.

Wet nitrocellulose membrane for the level 3 feature visualization of various latent fingerprints and gender determination

A facile and high-resolution enhancement of latent fingerprints (LFPs) has been developed by using a wet nitrocellulose (NC) membrane as a matrix under natural light. A clear fingerprint pattern was presented on the membrane after a fingertip touch owing to the difference in light transmittance between the ridge residues and the wet-NC-membrane background. Compared with conventional methods, this protocol can provide a higher resolution fingerprint image to extract level 3 details accurately. It is also compatible with commonly used fingerprint visualization techniques (magnetic ferric oxide powder and AgNO₃. The modified membrane could be more general to realize the high-resolution visualization of LFP transferred from various substrates, even independent of light projection. Due to the excellent feasibility and reproducibility of level 3 details extracted by the wet NC membrane, the frequency distribution of the distance between adjacent sweat pores (FDDasp) could be used to effectively distinguish the fragmentary fingerprints. Finally, the level 3 features of LFPs from females and males were conveniently extracted by the wet-NC-membrane method for gender identification. The statistical results indicated that females had a higher average sweat pore density (115/9 mm²) than males (84/9 mm²). Taken together, this approach provided a high-resolution, reproducible, and accurate imaging of LFPs, which shows great promise for forensic information analysis.

Multi-Stimuli-Responsive Amphiphilic Pyridinium Salt and Its Application in the Visualization of Level 3 Details in Latent Fingerprints

Organic luminescent materials that can simultaneously achieve multimode mechanochromism and its water-vapor-induced recovery are desirable for practical applications but rarely reported. Herein, an amphiphilic compound, 4-(9H-carbazol-9-yl)-1-(2-hydroxyethyl)pyridin-1-ium bromide (CPAB), is designed by integrating a lipophilic aromatic unit and hydrophilic end in the molecular architecture. Self-recovered mechanochromism from brown to cyan is observed upon mechanical grinding in air. Comprehensive research by X-ray diffraction, infrared spectroscopy, and single-crystal analysis reveals that the photoluminescence switch originates from the variation in intermolecular hydrogen bonds and molecular packing mode. The amphiphilic nature of CPAB allows water molecules to enter the crystalline lattice, forming two polymorphs of the crystalline phase, namely CPAB-D and CPAB-W. The hydrosoluble CPAB exhibits excellent capability in probing the level 3 details of fingerprints because its lipophilic part can target the fatty acid residues of fingerprints, leading to strong aggregation-induced fluorescence. The research may inspire the design of latent fingerprint developers and application in forensics/anti-counterfeiting.

Triphenylamine-Modified Cinnamaldehyde Derivate as a Molecular Sensor for Viscosity Detection in Liquids

Liquid safety is considered a serious public health problem; a convenient and effective viscosity determination method has been regarded as one of the powerful means to detect liquid safety. Herein, one kind of triphenylamine-modified cinnamaldehyde-based fluorescent sensor (3-(4'-(diphenylamino)-[1,1'-biphenyl]-4-yl)acrylaldehyde (DPABA)) has been developed for sensing viscosity fluctuations in a liquid system, where a cinnamaldehyde derivative was extracted from one kind of natural plant cinnamon and acted as an acceptor, which has been combined with a triphenylamine derivate via the Suzuki coupling reaction within one facile step. Twisted intramolecular charge transfer (TICT) was observed, and the rotation could be restricted in the high-viscosity microenvironment; thus, the fluorescent signal was released at 548 nm. Featured with a larger Stokes shift (223.8 nm in water, 145.0 nm in glycerol), high adaptability, sensitivity, selectivity, and good photostability, the capability of high signal-to-noise ratio sensing was achieved. Importantly, this sensor DPABA has achieved noninvasively identifying thickening efficiency investigation, and viscosity fluctuations during the liquid deterioration program have been screened as well. We believed that this unique strategy can accelerate intelligent molecular platforms toward liquid quality and safety inspection.

Strongly Fluorescent Conjugated Polymer Nanoparticles in Aqueous Colloidal Solution for Universal, Efficient and Effective Development of Sebaceous and Blood Fingerprints

Taking the same developing strategy for different types of latent fingerprints is helpful in improving the efficiency of criminal investigation. Here we advanced a new strategy based on amino-functionalized poly(p-phenylenevinylene) nanoparticles (PPV-brPEI NPs) in aqueous colloidal solution as the developing reagent. The desirable amino functionality and strong emission of NPs were simultaneously realized by adding branched polyethyleneimine (brPEI) during the process of thermal elimination of the PPV polymer precursor. The NPs were demonstrated to have negligible effects on the extraction of biological information from DNA. Using the PPV-brPEI NPs-soaked cotton pad, both latent sebaceous fingerprints (LSFPs) and latent blood fingerprints (LBFPs) can be effectively developed on different nonporous substrates. This strategy was highly sensitive and effective for aged, contaminated and moldy fingerprints. Additionally, the developed fingerprints could tolerate humidity environment and the alcohol atmosphere. The mechanism investigation suggests that interaction between PPV-brPEI NPs and sebum ingredients contributes to the development of LSFPs and interaction between PPV-brPEI NPs and proteins in blood contributes to the development of LBFPs, but the former is not as stable as the latter. This work provides a simple, environment/operator-friendly strategy for efficient fingerprint development, which is very promising for practical criminal investigations.

Aggregation-induced emission-active micelles: synthesis, characterization, and applications

Aggregation-induced emission (AIE)-active micelles are a type of fluorescent functional materials that exhibit enhanced emissions in the aggregated surfactant state. They have received significant interest due to their excellent fluorescence efficiency in the aggregated state, remarkable processability, and solubility. AIE-active micelles can be designed through the self-assembly of amphipathic AIE luminogens (AIEgens) and the encapsulation of non-emissive amphipathic molecules in AIEgens. Currently, a wide range of AIE-active micelles have been constructed, with a significant increase in research interest in this area. A series of advanced techniques has been used to characterize AIE-active micelles, such as cryogenic-electron microscopy (Cryo-EM) and confocal laser scanning microscopy (CLSM). This review provides an overview of the synthesis, characterization, and applications of AIE-active micelles, especially their applications in cell and in vivo imaging, biological and organic compound sensors, anticancer drugs, gene delivery, chemotherapy, photodynamic therapy, and photocatalytic reactions, with a focus on the most recent developments. Based on the synergistic effect of micelles and AIE, it is anticipated that this review will guide the development of innovative and fascinating AIE-active micelle materials with exciting architectures and functions in the future.

Multifunctional fluorescent Eu-MOF probe for tetracycline antibiotics and dihydrogen phosphate sensing and visualizing latent fingerprints†‡

The contamination of tetracycline antibiotics and dihydrogen phosphate (H₂PO₄⁻) in food and the environment is one of the major concerns for human health. Herein, a water-stable carboxyl-functionalized europium metal–organic framework (Eu-MOF) was prepared and demonstrated, for the first time, as a dual-responsive fluorescent sensor of tetracycline antibiotics (oxytetracycline (OTC), tetracycline (TC), and doxycycline (DOX)) and H₂PO₄⁻via fluorescent turn-on and turn-off, respectively. Eu-MOF presents a sensitive and selective detection of OTC with a rapid response time (1 min) and good anti-interference ability. The limits of detection (LODs) of 78 nm, 225 nm, and 201 nM were achieved for OTC, TC, and DOX, respectively. Coordination and hydrogen bonding led to energy and electron transfer from the TC to the MOF, contributing to the fluorescent enhancement mechanism. Moreover, Eu-MOF can effectively detect H₂PO₄⁻via fluorescence turn-off with a LOD of 0.70 μM. The interactions between H₂PO₄⁻ and MOF interrupt the energy transfer from ligand to MOF, leading to fluorescence quenching. In addition, Eu-MOF was successfully applied to determine OTC and H₂PO₄⁻ in real samples, obtaining satisfactory recoveries and RSDs. More fascinating, Eu-MOF could be utilized to develop latent fingerprints on various surfaces, providing well-defined fluorescent fingerprint details in which the sweat pores can be seen with the naked eye.

Water-stable Eu-MOF as a fluorescent probe for detecting tetracycline antibiotics and dihydrogen phosphate in real samples and visualization of latent fingerprints.

Recent Progress in Visualization and Analysis of Fingerprint Level 3 Features

Fingerprints provide sufficient and reliable discriminative characteristics which have been considered one of the most robust evidence for individualization. The limitation of current minutiae-based fingerprint technology seems to be solved with the development of level 3 features since they can offer additional information for problematic fingerprint recognition and even donor profiling. So far, tremendous efforts have been devoted to detecting and analysing the third-level details. This review summarizes the advances in level 3 details with an emphasis on their reliability assessment, visualization methods based on physical interaction, residue-response, mass spectrometry and electrochemical techniques, as well as the potentiality for individualization, donor profiling and even other application scenarios. In the end, we also give a personal perspective on the future direction and the remaining challenges in the third-level-detail-related field. We believe that the new exciting progress is expected in the development of level 3 detail detection and analysis with continued interest and attention to this field.

Instantaneous High-Resolution Visual Imaging of Latent Fingerprints in Water Using Color-Tunable AIE Pincer Complexes

Instant visualization of latent fingerprints is developed by using a series of water-soluble terpyridine zinc complexes as aggregation-induced emission probes in pure water, under UV light or ambient sunlight. By simply soaking, or spraying with an aqueous solution of the probe, bright yellow fluorescence images with high contrast and resolution are readily developed on various surfaces including tinfoil, glass, paper, steel, leather, and ceramic tile. Remarkably, latent fingerprints can be visualized within seconds including details of whorl and sweat pores. The color of emission can be tuned from blue to orange by modifying the pincer ligands, allowing direct imaging under sunlight. These inexpensive, water-resistant, and color-tunable probes provide a practical approach for latent fingerprints recording and analysis, security protection, as well as criminal investigation in different scenarios.

Synthesis of Mesoporous SiO2 coating containing chlorine phenol formaldehyde resin (Cl-PFR) composites for effective fingerprint detection

As a kind of non-metals fluorescent reagent, the containing chlorine phenol-formaldehyde resin (Cl-PFR) nanoparticles (NPs) were synthesized with the facile method. The as-synthesized Cl-PFR nanoparticles can emit strong green fluorescence emission under the irradiation of 365nm UV light. Since mesoporous silica nanoparticles (MSNs) NPs have a large specific area, strong adsorption, and uniform dispersion, the MSN coating Cl-PFR composites were prepared by mixing Cl-PFR and MSN NPs together. Thus, the as-synthesized multifunctional composites combine the advantages of green fluorescence Cl-PFR, and strong adhesion MSN was applied to detect the potential fingerprint. Different bases fingerprints (glass, paper, aluminum sheets, rough stones, tape) can be clearly observed in the presence of the Cl-PFR@MSN-NH₂ composites. Furthermore, the aging three months and washed with water several times fingerprint can also be clearly displayed with the multifunctional composites. This study provided a simple, economical, and non-toxic fluorescent reagent for the application in fingerprint detection.

Excitation-independent deep-blue emitting carbon dots with 62% emission quantum efficiency and monoexponential decay profile for high-resolution fingerprint identification

Reaching emissive nanomaterials at short wavelengths with a high quantum efficiency (QE) is an attractive task for researchers. This is more demanding in carbon dots (CDs) with diverse applications that usually emit photons at wavelengths around 450-620 nm. In this study, deep blue-emissive doped-CDs (d-CDs) with high photoluminescence (PL) QE up to 62% and excitation-independent properties were prepared via a short-time microwave irradiation method. The prepared CDs showed simultaneous amorphous and crystalline features, with average sizes of 4.75 nm and bright emission color located at 422 nm. It was found that the presence of sulfur-related dopant levels plays a key role in emission properties in such a way that the PL signal drops significantly in the absence of N-acetyl-l-cysteine (NAC) as a dopant source. On the other hand, the trisodium citrate dihydrate (TSC) was selected as a carbon source to form the main carbon skeleton without it no emission was recorded. Monoexponential-fitted recombination trend with an average lifetime of about 10 ns also confirmed excellent PL emission properties with uniform energy levels and minimized defect-contributing recombinations. The practical use of the as-prepared N, S-doped CDs was assessed in fingerprint detection indicating a bright and clear scheme for both core and termination regions of the fingerprint. Simplicity, cost-effectiveness, high-product yield, low toxicity, along with high/stable PL quantum efficiency in deep-blue wavelengths, and demonstrated ability for fingerprint purposes, support the prospective application of these dual doped-CDs for sensing and bioimaging applications.

Fluorescence Enhancement of Dicyanomethylene-4H-Pyran Derivatives in Solid State for Visualization of Latent Fingerprints

The efficient development of latent fingerprint (LFP) is attractively important for criminal investigation. The low-cost and high-contrast developer is still a challenge. In this study, we designed and synthesized dicyanomethylene-4H-pyran (DCM) derivatives PZ-DCM and Boc-PZ-DCM by introducing of large steric hindrance group Boc, the solid-state fluorescence of DCM derivatives was greatly enhanced. The low-cost fluorescent LFP developers were prepared by blending with different proportion of montmorillonite (MMT). As a result, clear and high contrast fingerprint patterns were obtained with dusting method by the developer with 3% content of Boc-PZ-DCM. Furthermore, we employed the developer with 3% content of Boc-PZ-DCM to develop the sweat latent fingerprints on different substrates by powder dusting, and collected clear fingerprint patterns, indicating that the developer is universal. In a word, the Boc-PZ-DCM/MMT powder is a promising candidate for LFP developer.

Time-Gated Imaging of Latent Fingerprints with Level 3 Details Achieved by Persistent Luminescent Fluoride Nanoparticles

The discovery of X-ray-charged persistent luminescence (PersL) in fluoride nanoparticles enables these materials to emit photons without real-time excitation, which provides a great possibility for the development of new luminescent nanotechnologies. In this work, we developed NaLuF₄:Mn nanoparticles with intense green PersL and functionalized surfaces and accordingly achieved time-gated imaging of latent fingerprints (LFPs) with Level 3 details. These surface-modified NaLuF₄:Mn nanoparticles exhibited near-spherical morphology, long-lasting emission for several hours, appropriate trap depth distribution, and tight chemical bonding with amino acids from fingerprints, thus greatly improving the accuracy of LFP imaging in a variety of environments. The developed NaLuF₄:Mn PersL nanoparticles are expected to find broad applications in the fields of LFP imaging and in vivo biological imaging.

Chemical-Based Surface Plasmon Resonance Imaging of Fingerprints

Fingerprints are extremely useful in personal identification; however, they are usually based on physical rather than chemical images because it remains a challenge to reveal a clear chemical fingerprint easily and sensitively. Herein, a surface plasmon resonance imaging (SPRi) method, combined with a chemically selective stepwise signal amplification (CS³A) strategy, is proposed to chemically image fingerprints with adjustable sensitivity and clarity. High-fidelity glucose-associated fingerprint images were obtained at five to seven cycles of CS³A based on the recognition reaction of concanavalin A (ConA) with dextran. The method is also extendable to image substances that possess and/or can be tagged with ConA- or dextran-recognizable groups. For demonstration, SPRi of carboxylic substances was conducted by amidating the carboxyl group with glucosamine to enable the ConA-based CS³A. Glucose- and carboxyl-based fingerprints were simultaneously and clearly imaged, allowing us to perform quantitative analysis of the representative of either glucose or amino acid (e.g., serine) or both. The curves measured from the standard spots were linear in the ranges of 1-4000 μM for glucose and 3.2-4000 μM for serine, with linear correlated coefficients of 0.9979 and 0.9962, respectively. It was then applied to the study of metabolic secretions in fingerprints during running exercise, yielding variation tendencies similar to those measured from sweat samples in the literature. As a noninvasive tool, the CS³A-coupled SPRi reveals both clear images of fingerprints and quantitative chemical information, and it is anticipated to become a competitive new method for chemically imaging fingerprints.

Cross-Linking Induced Emission of Polymer Micelles for High-Contrast Visualization Level 3 Details of Latent Fingerprints

Rationally developing an intelligent tool for high-contrast fluorescence imaging of latent fingerprints (LFPs) is gaining much concern in many applications such as medical diagnostics and forensic investigations. Herein, the off-on fluorescent polymer micelles (PMs) have been rationally designed and synthesized for high-contrast fluorescence imaging of LFPs through the cross-linking reaction of hydrazine (N₂H₄) and aldehyde group of polymer. Excitingly, the cross-linking (N₂H₄) induced emission of PMs has the property of aggregation-induced emission (AIE) and excited state intramolecular proton transfer (ESIPT), which could effectively address the notorious aggregation-caused quenching (ACQ) effects of conventional organic dyes. In addition, the cross-linking strategy can not only improve structural stability of PMs but also enhance its fluorescence brightness. The experiment results demonstrated that PMs showed high water dispersibility (100% aqueous solution), high selectivity, large Stokes shift (∼150 nm), good photostability, and excellent long-term stability. Because of the hydrophobic interaction between the PMs and fingerprint components, the PMs preferentially adhered onto the ridges of fingerprint, and then cross-linking (N₂H₄) induced emission properties endowed the PMs for high-contrast imaging of LFPs in different substrates, especially the levels 1-3 details of LFPs. We expect that this strategy will provide vital support for LFPs technology.

In Situ Visualization of Reversible Diels-Alder Reactions with Self-Reporting Aggregation-Induced Emission Luminogens

The dynamic reversible Diels-Alder (DA) reactions play essential roles in both academic and applied fields. Currently, in situ visualization and direct monitoring of the formation and cleavage of covalent bonds in DA reactions are hampered by finite compatibility and expensive precise instruments, especially limited in solid reactions. We herein report a fluorescence system capable of in situ visualization by naked eyes and monitoring DA/retro-DA reactions. With the fluorescence quenching effect, the synthesized TPEMI could work as an innovative self-indicator for both DA termination and retro-DA occurrence. The fluorescence increases during DA reactions, and the mechanism is investigated to establish qualitative and quantitative relations. Besides rapid screening of reaction conditions and monitoring of DA exchange processes, the TPEMI fluorescence system can visualize heterogeneous and solid-state reactions with the AIE character. The TPEMI platform is expected to offer novel insights into reversible DA processes and dynamic covalent chemistry.

A fluorescent molecular rotor for the in situ imaging of latent fingerprints

We developed a fluorescent molecular rotor that responds to hydrophobic and viscous environments and visualizes latent fingerprints with level 3 details.

Fast and quantitative analysis of level 3 details for latent fingerprints

Level 3 details play essential roles in practical latent fingerprint (LFP) identification. To reliably extract reproducible and identifiable level 3 features, high-resolution images of fingerprints with adequate quality are required. Conventional methods for acquiring level 3 details often involve specific pretreatment, intricate peripheral, leading to time-consuming analysis. Herein, we simply used water to develop the sebaceous LFPs deposited on nitrocellulose (NC) membranes with only one step, and then the high-resolution (2048 pixels per inch) optical micrographs were captured to reflect the live fingertip with high fidelity. From the pictures, level 3 features, including all dimensional attributes of the ridges and pores such as number, size, location, shape, and edge contour can be extracted accurately and reproducibly. Among them, qualitative features (the structures of ridge edges) and several quantitative characteristics (the number and the relative location of sweat pores) exhibit good reproducibility. Remarkably, we proposed a new parameter termed "frequency distribution of the distance between adjacent sweat pores", short form "FDDasp", which was further proved highly identifiable in different individuals, enabling the successful distinguishment between two fragmentary fingerprints with similar level 2 structures. We believe that this methodology provides a fast and quantitative analytical paradigm for latent fingerprint identification at level 3 details.