Photoorganocatalyzed Reversible-Deactivation Alternating Copolymerization of Chlorotrifluoroethylene and Vinyl Ethers under Ambient Conditions: Facile Access to Main-Chain Fluorinated Copolymers

Design of an Ultrafast and Controlled Visible Light-Mediated Photoiniferter RAFT Polymerization for Polymerization-Induced Self-Assembly (PISA)

In this contribution, we designed a new xanthate RAFT agent by introducing (5,6,7,8-tetrahydro-2-naphthalenyl)oxy (TNO) as the Z group, namely 2-[(((5,6,7,8-Tetrahydro-2-naphthalenyl)oxycarbonothioyl)thio)ethyl propanoate] (TNXEP). Due to the presence of the TNO group, TNXEP enabled highly controlled and ultrafast photoiniferter RAFT polymerization under violet (λ=405 nm) and blue (λ=450 nm) light. This approach was effectively extended to aqueous media for polymerization-induced self-assembly (PISA), facilitating the synthesis of polymeric nanoparticles. Leveraging the rapid photolysis and extended absorption of TNXEP, we demonstrated the first photoiniferter PISA system realizing ultrafast polymerization (>90 % monomer conversion in minutes) under visible light irradiation. Enhanced visible light penetration improved photopolymerization uniformity, enabling rapid and scalable production of polymeric nanoparticles at a 30 g scale in just 10 minutes, with tunable morphologies, including spheres, worms, and vesicles.

Light-Driven Organocatalyzed Controlled Radical Copolymerization of (Perfluoroalkyl)ethylenes and Vinyl Esters/Amides

Fluoropolymers of well-defined structures exhibit significant potential in a broad range of high-tech applications. However, the controlled synthesis of fluoropolymers from easily available monomers remains difficult. In this work, we report the development of an organocatalyzed controlled radical copolymerization of (perfluoroalkyl)ethylenes (PFAEs) and unconjugated vinyl monomers (UCMs) under light irradiation, which has enabled on-demand access toward side-chain fluorinated polymers under metal-free conditions. This method furnishes a large variety of polymers with diverse fluoroalkyl and ester/amide as pendent groups, tunable molar masses, and low dispersities (ca. Đ = 1.1-1.3), and adjustable fractions of PFAE and UCM units. Obtained fluoropolymers exhibit good chain-end fidelity and activity, allowing chain-extension polymerizations to prepare block copolymers of complicated compositions. Furthermore, the PFAE copolymers exhibit outstanding light transmission and low refractive index.

Synthesis of Ultrahigh Molecular Weight Poly (Trifluoroethyl Methacrylate) Initiated by the Combination of Palladium Nanoparticles with Organic Halides

Ultrahigh molecular weight polymers display outstanding properties and have great application potential. However, the traditional polymerization methods have inevitable disadvantages that challenge the green synthesis of ultrahigh molecular weight polymers. The paper achieved an ultrahigh molecular weight poly (trifluoroethyl methacrylate) via a novel polymerization and discussed the mechanistic, kinetic, and experimental aspects. The combination of palladium nanoparticles with ethyl 2-bromopropionate has been identified as an exceedingly efficient system for initiating the polymerization of trifluoroethyl methacrylate. An ultrahigh molecular weight poly (trifluoroethyl methacrylate) with a number-average molecular weight up to 3.03 × 106 Da has been synthesized at a feeding molar ratio of [poly (trifluoroethyl methacrylate)]/[ethyl 2-bromopropionate]/[palladium nanoparticles] = 3.95 × 104:756:1 at 70 °C. The reaction orders concerning palladium nanoparticles, ethyl 2-bromopropionate, and poly (trifluoroethyl methacrylate) were determined to be 0.59, 0.34, and 1.38, respectively. By analyzing a series of characterizations, we verified that the polymerization of poly (trifluoroethyl methacrylate) was initiated by the ethyl 2-bromopropionate residue radicals, which were generated from the interaction between palladium nanoparticles and ethyl 2-bromopropionate. The comparatively large size of the palladium nanoparticles provided a barrier to chain-growing radicals, promoting the synthesis of ultrahigh molecular weight polymers.

Controlled Radical Copolymerization toward Well-Defined Fluoropolymers

In the past 80 years, fluoropolymers have found broad applications in both industrial and academic settings, owing to their unique physicochemical properties. Copolymerizations of fluoroalkene feedstocks present an important avenue to obtain high-performance materials by merging intrinsic attributes of fluorocarbons and great versatility of comonomers. Recently, while massive investigations have disclosed the great potentials of precisely synthesized polymers, researchers have made considerable efforts to approach well-defined fluorinated copolymers. This minireview discusses challenges in controlled radical copolymerizations (CRCPs) of fluoroalkenes and provides a concise perspective on recent progress in CRCPs of fluoroalkenes (e.g., tetrafluoroethylene, chlorotrifluoroethylene, hexafluoropropene, perfluoroalkyl vinyl ethers) with non-fluorinated vinyl comonomers, which have enabled on-demand preparations of various main-chain fluoropolymers with predefined molar masses, low dispersities, as well as regulable chemical compositions and sequences. The synthetic advantages of CRCPs will promote controlled and facile access to customized fluoropolymers for high-tech applications such as batteries, coatings and so on.

Fluoropolymer Nanoparticles Synthesized via Reversible-Deactivation Radical Polymerizations and Their Applications

Fluorinated polymeric nanoparticles (FPNPs) combine unique properties of fluorocarbon and polymeric nanoparticles, which has stimulated massive interest for decades. However, fluoropolymers are not readily available from nature, resulting in synthetic developments to obtain FPNPs via free radical polymerizations. Recently, while increasing cutting-edge directions demand tailored FPNPs, such materials have been difficult to access via conventional approaches. Reversible-deactivation radical polymerizations (RDRPs) are powerful methods to afford well-defined polymers. Researchers have applied RDRPs to the fabrication of FPNPs, enabling the construction of particles with improved complexity in terms of structure, composition, morphology, and functionality. Related examples can be classified into three categories. First, well-defined fluoropolymers synthesized via RDRPs have been utilized as precursors to form FPNPs through self-folding and solution self-assembly. Second, thermally and photoinitiated RDRPs have been explored to realize in situ preparations of FPNPs with varied morphologies via polymerization-induced self-assembly and cross-linking copolymerization. Third, grafting from inorganic nanoparticles has been investigated based on RDRPs. Importantly, those advancements have promoted studies toward promising applications, including magnetic resonance imaging, biomedical delivery, energy storage, adsorption of perfluorinated alkyl substances, photosensitizers, and so on. This Review should present useful knowledge to researchers in polymer science and nanomaterials and inspire innovative ideas for the synthesis and applications of FPNPs.

Designing F/P Hybrid Polymer as Ultrastable Cationic Shielding Interphase for High-Performance Lithium Metal Batteries

Dendrite growth on electrode-electrolyte interphase has severely limited applications of lithium metal batteries (LMBs). Here, we developed an ionic alternating polymer with fluorocarbons and phosphonium cations in repeating units to regulate Li deposition for the first time. The combined functionalities in the F/P hybrid polymer exhibit remarkable characteristics as a protective layer on top of Li anode, demonstrating outstanding electrochemical stability, ion flux redistributing capability and adaptive chain mobility. Based on characterizations and simulations, this cationic interlayer could effectively furnish long-standing electrostatic shielding for anodes, allowing restrained coating decomposition and homogenized electric field distribution to induce dendrite-free Li deposition, and enabling full cells with enhanced rate and long-term cycling performance. Given the importance of LMBs, this work will promote polymer design to stabilize anodes with superior electrochemical behavior.

Organocatalyzed Controlled Radical Copolymerization toward Hybrid Functional Fluoropolymers Driven by Light

Photo-controlled polymerizations are attractive to tailor macromolecules of complex compositions with spatiotemporal regulation. In this work, with a convenient synthesis for trifluorovinyl boronic ester (TFVB), we report a light-driven organocatalyzed copolymerization of vinyl monomers and TFVB for the first time, which enabled the controlled synthesis of a variety of hybrid fluorine/boron polymers with low dispersities and good chain-end fidelity. The good behaviors of "ON/OFF" switch, chain-extension polymerizations and post-modifications further highlight the versatility and reliability of this copolymerization. Furthermore, we demonstrate that the combination of fluorine and boron could furnish copolymer electrolytes of high lithium-ion transference number (up to 0.83), bringing new opportunities of engineering high-performance materials for energy storage purposes.

Multifunctional Waterborne Polyurethane Microreactor-Based Approach to Fluorocarbon Composite Latex Coatings with Double Self-Healing and Excellent Synergistic Performances

In this article, chlorotrifluoroethylene (CTFE)-based fluorocarbon composite latexes and their coatings are successfully fabricated by an environmentally friendly preparation method based on a new multifunctional waterborne polyurethane (MFWPU) dispersion. It is worth noting that the MFWPU acts as the sole system stabilizer as well as microreactor and simultaneously endows the composite coating with excellent double self-healing performance and adhesion. Moreover, the introduction of a dynamic disulfide bond in the polyurethane dispersion entrusts the coating with excellent scratch self-healing performance. Simultaneously, carbon-carbon double bonds in the polyurethane dispersion increase the compatibility between the core polymer and shell polymer. The fluorine-containing chain segments can be distributed in the coating evenly during the self-assembly film-forming process of composite particles so that the original element composition of the worn coating surface can restore the original element composition after heating, and the coating presents a regeneration ability, which further and verifies the usefulness of the double self-healing model of the coating. Afterward, efficient recovery and durability, which are two contradictory properties of scratch self-healing polymers, are optimized to obtain a composite coating with excellent comprehensive performance. The research results regarding the composite system may provide a valuable reference for the structural design and application of waterborne fluorocarbon functional coatings in the future.

An aqueous photo-controlled polymerization under NIR wavelengths: synthesis of polymeric nanoparticles through thick barriers

We report an aqueous and near-infrared (NIR) light mediated photoinduced reversible addition-fragmentation chain transfer (photo-RAFT) polymerization system using tetrasulfonated zinc phthalocyanine (ZnPcS4 -) as a photocatalyst. Owing to the high catalytic efficiency and excellent oxygen tolerance of this system, well-controlled polyacrylamides, polyacrylates, and polymethacrylates were synthesized at fast rates without requiring deoxygenation. Notably, NIR wavelengths possess enhanced light penetration through non-transparent barriers compared to UV and visible light, allowing high polymerization rates through barriers. Using 6.0 mm pig skin as a barrier, the polymerization rate was only reduced from 0.36 to 0.21 h-1, indicating potential for biomedical applications. Furthermore, longer wavelengths (higher λ) can be considered an ideal light source for dispersion photopolymerization, especially for the synthesis of large diameter (d) nanoparticles, as light scattering is proportional to d 6/λ 4. Therefore, this aqueous photo-RAFT system was applied to photoinduced polymerization-induced self-assembly (photo-PISA), enabling the synthesis of polymeric nanoparticles with various morphologies, including spheres, worms, and vesicles. Taking advantage of high penetration and reduced light scattering of NIR wavelengths, we demonstrate the first syntheses of polymeric nanoparticles with consistent morphologies through thick barriers.

Diaryl dithiocarbamates: synthesis, oxidation to thiuram disulfides, Co(III) complexes [Co(S2CNAr2)3] and their use as single source precursors to CoS2

Air and moisture stable diaryl dithiocarbamate salts, Ar₂NCS₂Li, result from addition of CS₂ to Ar₂NLi, the latter being formed upon deprotonation of diarylamines by ⁿBuLi. Oxidation with K₃[Fe(CN)₆] affords the analogous thiuram disulfides, (Ar₂NCS₂)₂, two examples of which (Ar = p-C₆H₄X; X = Me, OMe) have been crystallographically characterised. The interconversion of dithiocarbamate and thiuram disulfides has also been probed electrochemically and compared with that established for the widely-utilised diethyl system. While oxidation reactions are generally clean and high yielding, for Ph(2-naphthyl)NCS₂Li an ortho-cyclisation product, 3-phenylnaphtho[2,1-d]thiazole-2(3H)-thione, is also formed, resulting from a competitive intramolecular free-radical cyclisation. To demonstrate the coordinating ability of diaryl dithiocarbamates, a small series of Co(III) complexes have been prepared, with two examples, [Co{S₂CN(p-tolyl)₂}₃] and [Co{S₂CNPh(m-tolyl)}₃] being crystallographically characterised. Solvothermal decomposition of [Co{S₂CN(p-tolyl)₂}₃] in oleylamine generates phase pure CoS₂ nanospheres in an unexpected phase-selective manner.

Monophosphoniums as Effective Photoredox Organocatalysts for Visible Light-Regulated Cationic RAFT Polymerization

Visible light-regulated metal-free polymerizations have attracted considerable attention for macromolecular syntheses in recent years. However, few organic photocatalysts show high efficiency and strict photocontrol in cationic polymerizations. Herein, we introduce monophosphonium-doped polycyclic arenes as an organic photocatalyst, which features the high tunability, broad redox window, long excited state lifetime, and excellent temporal control in the cationic reversible addition-fragmentation chain transfer polymerization of vinyl ethers. A correlation of the catalytic performance and the photophysical and electrochemical properties of photocatalysts is also discussed.

Catalytic aerobic photooxidation of triarylphosphines using dibenzo-fused 1,4-azaborines

Although dibenzo-fused 1,4-heteroaromatics are utilized as strongly reducing photocatalysts in organic synthesis and polymerization, they have rarely been employed in catalytic photooxidation. Moreover, to date, their boron-analogs, dibenzo-fused 1,4-azaborines (DBABs), have not been applied in photocatalysis despite their promising potential as photocatalysts. Accordingly, herein, aerobic photooxidation of triarylphosphines (Ar₃P) was performed using DBABs as photocatalysts. The reaction smoothly proceeded in an aprotic solvent, and phosphine oxides were obtained in appropriate yields. Density functional theory calculations suggested that DBAB captured and activated phosphadioxirane intermediates, which were generated by the interaction of Ar₃P with ¹O₂, at the Lewis acidic boron center.

RAFT Polymerization of Semifluorinated Monomers Mediated by a NIR Fluorinated Photocatalyst

Near-infrared (NIR) light plays an increasingly important role in the field of photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization due to its unique properties. Yet, the NIR photocatalyst with good stability for PET-RAFT polymerization remains promising. Here, a strategy of NIR PET-RAFT polymerization of semifluorinated monomers using fluorophenyl bacteriochlorin as a photocatalyst with strong absorption at the NIR light region (710-780 nm) is reported. In which, the F atoms are used to modify reduced tetraphenylporphyrin structure with enhanced photostability of photocatalyst. Under the irradiation of NIR light (λ_max = 740 nm), the PET-RAFT polymerization of semifluorinated methylacrylic monomers presents living/control characteristics and temporal modulation. By the PET-RAFT polymerization-induced self-assembly (PISA) strategy, stable fluorine-containing micelles are constructed in various solvents. In addition, the fluorinated hydrophobic surface is fabricated via a surface-initiated PET-RAFT (SI-PET-RAFT) polymerization using silicon wafer bearing RAFT agents with tunable surface hydrophobicity. This strategy not only enlightens the application of further modified compounds based on porphyrin structure in photopolymerization, but also shows promising potential for the construction of well-defined functional fluoropolymers.

Main-Chain Fluoropolymers with Alternating Sequence Control via Light-Driven Reversible-Deactivation Copolymerization in Batch and Flow

Polymers with regulated alternating structures are attractive in practical applications, particularly for main-chain fluoropolymers. We for the first time enabled controlled fluoropolymer synthesis with alternating sequence regulation using a novel fluorinated xanthate agent via a light-driven process, which achieved on-demand copolymerization of chlorotrifluoroethylene and vinyl esters/amides under both batch and flow conditions at ambient pressure. This method creates a facile access to fluoropolymers with a broad fraction range of alternating units, low dispersities and high chain-end fidelity. Moreover, a two-step photo-flow platform was established to streamline the in-situ chain-extension toward unprecedented block copolymers continuously from fluoroethylene. Influences of structural control were illustrated with thermal and surface properties. We anticipate that this work will promote advanced material engineering with customized fluoropolymers.

Synthesis of Crystalline CF3 -Rich Perfluoropolyethers from Hexafluoropropylene Oxide and (Trifluoromethyl)trimethylsilane

The synthesis of a CF₃ -rich perfluoropolyether (PFPE) was achieved via the fluoride-catalyzed reaction of hexafluoropropylene oxide (HFPO) with (trifluoromethyl)trimethylsilane (TMSCF₃ , so-called Ruppert-Prakash reagent). Nucleophilic addition of a CF₃ anion to HFPO affords an acyl fluoride via the ring-opening of HFPO, followed by fluoride elimination. Further addition of CF₃ anions to the acyl fluoride gives tertiary perfluoroalkoxide, which attacks HFPO to regenerate an acyl fluoride. Repetition of the sequence via substitution-polymerization afforded a new PFPE as a solid, whose structure was confirmed using ¹⁹ F NMR spectroscopy, GC-MS, and MALDI-TOF MS analysis. Thermal and X-ray diffraction analyses revealed a crystalline character. To the best of our knowledge, this is the first example of crystalline PFPE. Based on contact-angle measurements, the critical surface tension of this solid PFPE (13.4 mN m^-1 ) suggests a water- and oil-repellency of this CF₃ -rich PFPE that is higher than that of polytetrafluoroethylene (PTFE; 18.5 mN m^-1 ). This article is protected by copyright. All rights reserved.

Development of High Throughput Photopolymerizations Using Micron-Sized Ultrathin Metal-Organic Framework Nanosheets

Polymer syntheses in a high throughput format are still challenging due to the tedious procedures for prior deoxygenation and catalyst removal. Two-dimensional (2D) metal-organic framework (MOF) nanosheets are advantageous for elevating the catalytic efficiency and catalyst recyclability. Polymerization of a wide variety of monomers, including hydrophilic acrylamides and hydrophobic acrylates, was attempted directly in a multi-well plate by employing Zn-ZnPPF-2D nanosheets (PPF = porphyrin paddlewheel framework) as a heterogeneous photocatalyst. Various parameters such as monomer concentration, catalyst concentration and light wavelength were investigated with respect to their effects on polymerization rate and the degree of control over the molecular weight and molecular weight distribution. Due to the larger surface area and more accessible catalytic sites, the top-performing Zn-ZnPPF-2D exhibited fast polymerization kinetics over the Zn-ZnPPF-3D bulk crystals. In addition, the synthesis of triblock copolymers with a single loading of catalysts confirmed the outstanding catalytic performance of these 2D MOF catalysts. Finally, PET-RAFT polymerization was demonstrated to be achievable entirely in a microliter-scale human cell culture medium. As such, this strategy provides high levels of control and precision over macromolecular synthesis outcomes that best align with the requirements of high throughput approaches towards biological applications. This article is protected by copyright. All rights reserved.

Facile synthesis of N-aryl phenothiazines and phenoxazines via Brønsted acid catalyzed C-H amination of arenes

N-Aryl phenothiazines and phenoxazines are of significant importance in various disciplines throughout academia and industry. The conventional synthetic strategy for the construction of these structures centers on the transition-metal-catalyzed cross-coupling of aryl halides with phenothiazines or phenoxazines. Here we present an organocatalytic approach to access N-naphthyl phenothiazine and phenoxazine scaffolds through a straightforward C-H amination of arenes as enabled by an azo group. This reaction features operational simplicity, adequate substrate generality and excellent functional group compatibility. Notably, the efficiency of the catalyst could be perfectly preserved after 5 catalytic cycles.

Expanding monomer scope and enabling post-modification in photocontrolled radical ring-opening polymerization of vinylcyclopropanes by an iodine transfer strategy

Visible light-driven iodine transfer polymerization provides efficient and unique access to novel poly(vinylcyclopropanes) with enhanced material properties.

Chemo- and regio-divergent access to fluorinated 1-alkyl and 1-acyl triazenes from alkynyl triazenes

The 1,1,2,2-tetrafluoroethylene unit is a prevalent pattern in bioactive molecules and functional materials. Despite being in principle a straightforward strategy to access this motif, the direct tetrafluorination of alkynes involves...

De Novo Design of Star-Shaped Glycoligands with Synthetic Polymer Structures toward an Influenza Hemagglutinin Inhibitor

Synthetic polymers with well-defined structures allow the development of nanomaterials with additional functions beyond biopolymers. Herein, we demonstrate de novo design of star-shaped glycoligands to interact with hemagglutinin (HA) using well-defined synthetic polymers with the aim of developing an effective inhibitor for the influenza virus. Prior to the synthesis, the length of the star polymer chains was predicted using the Gaussian model of synthetic polymers, and the degree of polymerization required to achieve multivalent binding to three carbohydrate recognition domains (CRDs) of HA was estimated. The star polymer with the predicted degree of polymerization was synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization, and 6'-sialyllactose was conjugated as the glycoepitope for HA. The designed glycoligand exhibited the strongest interaction with HA as a result of multivalent binding. This finding demonstrated that the biological function of the synthetic polymer could be controlled by precisely defining the polymer structures.

Degradable Vinyl Random Copolymers via Photocontrolled Radical Ring-Opening Cascade Copolymerization

Degradable vinyl polymers by radical ring-opening polymerization are promising solutions to the challenges caused by non-degradable vinyl plastics. However, achieving even distributions of labile functional groups in the backbone of degradable vinyl polymers remains challenging. Herein, we report a photocatalytic approach to degradable vinyl random copolymers via radical ring-opening cascade copolymerization (rROCCP). The rROCCP of macrocyclic allylic sulfones and acrylates or acrylamides mediated by visible light at ambient temperature achieved near-unity comonomer reactivity ratios over the entire range of the feed compositions. Experimental and computational evidence revealed an unusual reversible inhibition of chain propagation by in situ generated sulfur dioxide (SO2), which was successfully overcome by reducing the solubility of SO2. This study provides a powerful approach to degradable vinyl random copolymers with comparable material properties to non-degradable vinyl polymers.

Facile photochemical synthesis of main-chain-type semifluorinated alternating copolymers catalyzed by conventional amines or halide salts

In this work, we report a much simpler and low-cost method to prepare main-chain-type semifluorinated alternating copolymers by the formation of a halogen bond (XB) complex between α,ω-diiodoperfluoroalkanes and amines/halide salts. It is interesting that the terminal iodine functional group of the polymer chains is easily lost in the amine-promoted system, while the loss can be significantly reduced by adding a small amount of water. Importantly, the system promoted by halide salts can ensure complete retention of the iodine functional group. Overall, the establishment of this method provides a new strategy for designing smart fluoropolymer materials in a green and environmentally friendly facile manner under irradiation with visible light at room temperature.

Visible-Light-Enabled Organocatalyzed Controlled Alternating Terpolymerization of Perfluorinated Vinyl Ethers

Polymerizations of perfluorinated vinyl ethers (PFVEs) provide an important category of fluoropolymers that have received considerable interests in applications. In this work, we report the development of an organocatalyzed controlled radical alternating terpolymerization of PFVEs and vinyl ethers (VEs) under visible-light irradiation. This method not only enables the synthesis of a broad scope of fluorinated terpolymers of low dispersities and high chain-end fidelity, facilitating tuning the chemical compositions by rationally choosing the type and/or ratio of comonomers, but also allows temporal control of chain-growth, as well as the preparation of a variety of novel fluorinated block copolymers. To showcase the versatility of this method, fluorinated alternating terpolymers have been synthesized and customized to simultaneously display a variety of desirable properties for solid polymer electrolyte design, creating new opportunities in high-performance energy storage devices.

Light-Mediated Polymerization Induced by Semiconducting Nanomaterials: State-of-the-Art and Future Perspectives

Direct capture of solar energy for chemical transformation via photocatalysis proves to be a cost-effective and energy-saving approach to construct organic compounds. With the recent growth in photosynthesis, photopolymerization has been established as a robust strategy for the production of specialty polymers with complex structures, precise molecular weight, and narrow dispersity. A key challenge in photopolymerization is the scarcity of effective photomediators (photoinitiators, photocatalysts, etc.) that can provide polymerization with high yield and well-defined polymer products. Current efforts on developing photomediators have mainly focused on organic dyes and metal complexes. On the other hand, nanomaterials (NMs), particularly semiconducting nanomaterials (SNMs), are suitable candidates for photochemical reactions due to their unique optical and electrical properties, such as high absorption coefficients, large charge diffusion lengths, and broad absorption spectra. This review provides a comprehensive insight into SNMs' photomediated polymerizations and highlights the roles SNMs play in photopolymerizations, types of polymerizations, applications in producing advanced materials, and the future directions.

Conjugated Cross-linked Phenothiazines as Green or Red Light Heterogeneous Photocatalysts for Copper-Catalyzed Atom Transfer Radical Polymerization

Using the power of light to drive controlled radical polymerizations has provided significant advances in synthesis of well-defined polymers. Photoinduced atom transfer radical polymerization (ATRP) systems often employ UV light to regenerate copper activator species to mediate the polymerization. Taking full advantage of long-wavelength visible light for ATRP would require developing appropriate photocatalytic systems that engage in photoinduced electron transfer processes with the ATRP components to generate activating species. Herein, we developed conjugated microporous polymers (CMP) as heterogeneous photocatalysts to exploit the power of visible light in promoting copper-catalyzed ATRP. The photocatalyst was designed by cross-linking phenothiazine (PTZ) as a photoactive core in the presence of dimethoxybenzene as a cross-linker via the Friedel-Crafts reaction. The resulting PTZ-CMP network showed photoactivity in the visible region due to the extended conjugation throughout the network because of the aromatic groups connecting the PTZ units. Therefore, photoinduced copper-catalyzed ATRP was performed with CMPs that regenerated activator species under green or red light irradiation to start the ATRP process. This resulted in efficient polymerization of acrylate and methacrylate monomers with high conversion and well-controlled molecular weight. The heterogeneous nature of the photocatalyst enabled easy separation and efficient reusability in subsequent polymerizations.

Rational Design of an Antifungal Polyacrylamide Library with Reduced Host-Cell Toxicity

Life-threatening invasive fungal infections represent an urgent threat to human health worldwide. The limited set of antifungal drugs has critical constraints such as resistance development and/or adverse side effects. One approach to overcome these limitations is to mimic naturally occurring antifungal peptides called defensins. Inspired by their advantageous amphiphilic properties, a library of 35 synthetic, linear, ternary polyacrylamides was prepared by controlled/living radical polymerization. The effect of the degree of polymerization (20, 40, and 100) and varying hydrophobic functionalities (branched, linear, cyclic, or aromatic differing in their number of carbons) on their antifungal activity was investigated. Short copolymers with a calculated log P of ∼1.5 revealed optimal activity against the major human fungal pathogen Candida albicans and other pathogenic fungal species with limited toxicity to mammalian host cells (red blood cells and fibroblasts). Remarkably, selected copolymers outperformed the commercial antifungal drug amphotericin B, with respect to the therapeutic index, highlighting their potential as novel antifungal compounds.

Recent Advances in Living Cationic Polymerization with Emerging Initiation/Controlling Systems

While the conventional living cationic polymerization (LCP) provided opportunities to synthesizing well-defined polymers with predetermined molecular weights, desirable chemical structures and narrow dispersity, it is still important to continuously innovate new synthetic methods to meet the increasing requirements in advanced material engineering. Consequently, a variety of novel initiation/controlling systems have be demonstrated recently, which have enabled LCP with spatiotemporal control, broadened scopes of monomers and terminals, more user-friendly operations and reaction conditions, as well as improved thermomechanical properties for obtained polymers. In this work, recent advances in LCP is summarized with emerging initiation/controlling systems, including chemical-initiated/controlled cationic reversible addition-fragmentation chain transfer (RAFT) polymerization, photoinitiated/controlled LCP, electrochemical-controlled LCP, thionyl/selenium halide-initiated LCP, organic acid-assisted LCP, and stereoselective LCP. It is hoped that this summary will provide useful knowledge to people in related fields and stimulate new ideas to promote the development and application of LCP in both academia and industry.

Novel perfluoropolyalkylethers monomers: synthesis and photo-induced cationic polymerization

Several difunctional oligomers were synthesized by functionalizing perfluoropolyalkylether (PFPAE) chains with different vinyl ethers and epoxides end-groups. Due to their innate synthetic challenges and demanding purification protocols, the PFPAE derivatives were obtained in low yield and with an average functionality lower than 2. However, the functionalized PFPAE oligomers were successful in being used in photo-induced cationic polymerization processes, obtaining transparent and soft films. The influences of the fluorinated chains, and various end-groups on the photopolymerization process were investigated, as well their chemical stability, thermal degradation, and surface properties.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s00396-021-04838-1.

Synthesis of Fluoroalkyl Sulfides via Additive-Free Hydrothiolation and Sequential Functionalization Reactions

A modular synthetic method, involving a hydrothiolation, silylation, and fluoroalkylation, for the construction of highly functionalized fluoroalkyl sulfides has been developed. The use of aprotic polar solvents enables the additive-free chemoselective hydrothiolation of tetrafluoroethylene, trifluorochloroethylene, and hexafluoropropene with various thiols. The stepwise functionalization reactions convert the hydrothiolated intermediates into the tetrafluoroethyl sulfides in high efficiency. The method avoids the use of the environmental pollutant Halon-2402, which was employed as a building block in a reported synthetic route.

From 0-dimension to 1-dimensions: Au nanocrystals as versatile plasmonic photocatalyst for broadband light induced RAFT polymerization

Gold nanoparticles and nanorods were utilized as the catalyst for photo-induced RAFT polymerization, because of their strong LSPR performance.

Near-Infrared, Light-Induced Cationic and Radical RAFT Polymerization Catalyzed by Iron Complex

A near-infrared (NIR) light induced controlled cationic polymerization is presented here. The halide abstraction reaction between the cyclopentadienyl iron dicarbonyl dimer (Fe₂(Cp)₂(CO)₄) and an organic halide is utilized to generate initial radicals or cations under mild conditions, which can be further combined with both radical and cationic reversible addition-fragmentation chain transfer (RAFT) polymerization. Well-defined poly(vinyl ether)s and polyacrylates are prepared successfully under NIR light by this method. The excellent penetration ability of NIR light through thick barriers has been verified by polymerization in the presence of an A4 paper. In addition, iron-based radical polymerization has been used for three-dimensional (3D) printing to fabricate materials with different thicknesses.