Identification of Prime Factors to Maximize the Photocatalytic Hydrogen Evolution of Covalent Organic Frameworks

Designed Synthesis of Mesoporous sp2 Carbon-Conjugated Benzothiadiazole Covalent Organic Frameworks for Artificial Photosynthesis of Hydrogen Peroxide

Artificial photosynthesis of hydrogen peroxide (H2O2) from ambient air, water, and sunlight has attracted considerable attention recently. Despite being extremely challenging to synthesis, sp2 carbon-conjugated covalent organic frameworks (COFs) can be powerful and efficient materials for the photosynthesis of H2O2 due to desirable properties. Herein, we report the designed synthesis of an sp2 carbon-conjugated COF, BTD-sp2c-COF, from benzothiadiazole and triazine units with high crystallinity and ultralarge mesopores (∼4 nm). The sp2 carbon-conjugated skeletons guarantee BTD-sp2c-COF superior optoelectronic properties and chemical stability. BTD-sp2c-COF exhibits an exceptional efficiency of 3066 μmol g-1 h-1 from pure water and air, much better than that of BTD-imine-COF. In contrast, the resilience of BTD-imine-COF is compromised due to the participation of imine linkages in the oxygen reduction reaction. Importantly, in situ characterization and theoretical calculation results reveal that both benzothiadiazole and triazine units serve as oxygen reduction reaction centers for H2O2 photosynthesis through a sequential electron transfer pathway, while the vinylene bridged phenyls serve as water oxidation reaction centers. The sp2 carbon-conjugated COFs pave the way for potent artificial photosynthesis.

Quasi-One-Dimensional Zigzag Covalent Organic Frameworks for Photocatalytic Hydrogen Evolution from Water

Covalent organic frameworks (COFs) have potential applications in a wide range of fields. However, it remains a critical challenge to constrain their covalent expansions in the one-dimensional (1D) direction. Here, we developed a general approach to fabricate 15 different highly crystalline COFs with zigzag-packed 1D porous organic chains through the condensation of V-shaped ditopic linkers and X-shaped tetratopic knots. Appropriate geometrical combinations of a wide scope of linkers and knots with distinct aromatic cores, linkages, and functionalities offer a series of quasi-1D COFs with dominant pore sizes of 7-13 Å and surface areas of 116-784 m2 g-1. Among them, nitrogen (N)-doped 1D COFs with site-specific doping of heteroatoms favor a tunable control of band structures and conjugations and thus allow a remarkable hydrogen evolution rate up to 80 mmol g-1 h-1 in photocatalytic water splitting. This general strategy toward programming function in porous crystalline materials has the potential to tune the topologically well-defined electronic properties through precisely periodic doping.

Electron Transport over 2D Molecular Materials and Assemblies

ConspectusTwo-dimensional (2D) molecular materials, in which the major interactions are confined in 2D planes with contrasted force fields acting in between the planes, have been key electronic functional materials since the past decade. Even without referring to the functionals of graphene-based systems, 2D electronic conjugated systems are expected to show extrawide dynamic ranges in electronic density of states (DOS) tuning, effective electron mass, electron mobility, and conductivity. A major advantage of 2D electronic systems is their compatibility with the ubiquitous electronic devices designed using planar structures, such as transistors and memories, which is associated with the utility of 2D active materials. The mobility of electrons in 2D systems is the key to their utility, and various conjugated molecular and 2D materials have been designed to optimize the mobility. This Account begins with an introduction for mobility assessment: using noncontact time-resolved microwave conductivity (TRMC) measurements as a technique to probe differential conductivity upon transient charge carrier injection into the materials. Electronic transport over 2D electronic materials such as graphenes, covalent organic frameworks (COFs), and metal-organic frameworks (MOFs) is discussed with a special emphasis on molecular building blocks, fine-tuning conducting species and linkages, topology of the framework, and controlling molecular doping. The superiority of β-ketoenamine-linked COF over imine-linked COF films in charge transport and dominant in-plane charge carrier mobility over out-of-plane mobility is also illustrated. Systematic molecular engineering of the building blocks of β-ketoenamine-linked COFs with varying degrees of donor-acceptor (D-A) conjugation, torsional angles, and reaction conditions resulted in the modulation of the efficiency of charge carrier generation/transport as well as exciton migration. The advantages of 2D systems are finally discussed in terms of the mobility interplaying with spatial arrangements of molecules as well as the substantial role of intermolecular interactions in stabilizing their condensed phases. The strong correlation between the dispersion of mobility and hierarchical intermolecular interactions sheds light on the way to overcome structural fluctuation on the optimization of charge transport in molecular electronic materials. The point of singularity in the dispersion at an intermolecular distance of d ∼ 0.3 nm is deduced from the overall mobility assessment in condensed phases of conjugated molecules, suggesting key roles of intermolecular electronic coupling: the new concept of electronic conjugation. Exceptional electronic coupling with relatively high charge carrier mobility was also observed, particularly in 2D spatial arrangements of chiral molecules in contrast to 3D analogues, where the reduction of gravitational density of the molecular condensates was impacting DOS: the Wallach's rule. 2D electronic systems are strong candidates for the violation of the long-lasting Wallach's rule in terms of DOS.

Ultrafine Spatial Modulation of Diazapyrene-Based Two-Dimensional Conjugated Covalent Organic Frameworks

Tailormade bottom-up synthesis of covalent organic frameworks (COFs) from various functional building blocks offer not only tunable topology and pore size but also multidimensional properties. High crystallinity is one of the prerequisites for their structures and associated physicochemical properties. Among different π-conjugated motifs for constructing COFs, pyrene-based tetragonal structures are effective in achieving highly ordered and crystalline states. In the present research, we demonstrated that the substitution of pyrene with 2,7-diazapyrene produces nearly "flat" structures of two-dimensional (2D) COF layers by controlling the torsional angle of linker molecules. Featuring finite pore diameters and excellent thermodynamic stability of ∼500 °C, ordered face-to-face (slipped AA) stacking arrangements were produced. Extended electrical conjugation spanning 2D frames with modest optical bandgaps (Eg) of ∼2.1 eV shows the planar character of diazapyrene-based COFs. The stacking of the conjugated 2D frames with small Eg values is also beneficial for the formation of highly stable conducting pathways in the crystalline state, which was confirmed by the results of the microwave conductivity measurements. Nitrogen centers in diazapyrene units also play a key role as the active sites for proton transfer, and the maximum proton conductivity of σ = 10-2 S cm-1 was achieved along the cocontinuous nanopore structures surrounded by the active sites. Results show that tetragonal COFs based on diazapyrene can be used as a highly crystalline two-dimensional material with special electrical and proton-conducting capabilities.

Enhancing visible-light-driven photocatalysis: unveiling the remarkable potential of H2O2-assisted MOF/COF hybrid material for organic pollutant degradation

In this study, we synthesized MOF/COF hybrid material (NH2-MOF-5/MCOF) by integrating NH2-MOF-5 (Zn) with a melamine-based COF (MCOF) to target the photocatalytic degradation of methylene blue (MB) dye. Characterization using SEM, XRD, XPS, FT-IR, and UV-DRS confirmed the synthesized MOF/COF hybrid's exceptional photocatalytic performance under visible light. The addition of H2O2 significantly enhanced the photocatalytic degradation, achieving removal rates of 90%, 92%, and 57% for 11.75 mg L-1, 30 mg L-1, and 83 mg L-1 of MB, respectively. Kinetic studies revealed first-order kinetics, with a rate constant nearly 3.5 times higher with added H2O2. We proposed a comprehensive photocatalytic mechanism elucidated through energy band structure analysis and scavenger tests. Our findings revealed the formation of a heterojunction between NH2-MOF-5 and MCOF, which mitigates electron-hole recombination, with ∙OH identified as the principal species governing methylene blue degradation. Moreover, the NH2-MOF-5/MCOF hybrid displayed excellent reusability and chemical stability over six cycles. Notably, this H2O2-assisted hybrid material demonstrated the removal of 99% of ibuprofen, a pharmaceutical drug, showcasing its broad applicability in removing organic contaminants in aqueous solutions, thereby holding great promise for wastewater treatment.

Constructing Photocatalytic Covalent Organic Frameworks with Aliphatic Linkers

Photocatalytic covalent organic frameworks (COFs) are typically constructed with rigid aromatic linkers for crystallinity and extended π-conjugation. However, the essential hydrophobicity of the aromatic backbone can limit their performances in water-based photocatalytic reactions. Here, we for the first time report the synthesis of hydrophilic COFs with aliphatic linkers [tartaric acid dihydrazide (TAH) and butanedioic acid dihydrazide] that can function as efficient photocatalysts for H2O2 and H2 evolution. In these hydrophilic aliphatic linkers, the specific multiple hydrogen bonding networks not only enhance crystallization but also ensure an ideal compatibility of crystallinity, hydrophilicity, and light harvesting. The resulting aliphatic linker COFs adopt an unusual ABC stacking, giving rise to approximately 0.6 nm nanopores with an improved interaction with water guests. Remarkably, both aliphatic linker-based COFs show strong visible light absorption, along with a narrow optical band gap of ∼1.9 eV. The H2O2 evolution rate for TAH-COF reaches up to 6003 μmol h-1 g-1, in the absence of sacrificial agents, surpassing the performance of all previously reported COF-based photocatalysts. Theoretical calculations reveal that the TAH linker can enhance the indirect two-electron oxygen reduction reaction for H2O2 production by improving the O2 adsorption and stabilizing the *OOH intermediate. This study opens a new avenue for constructing semiconducting COFs using nonaromatic linkers.

Covalent Bonding of Salen Metal Complexes with Pyrene Chromophores to Porous Polymers for Photocatalytic Hydrogen Evolution

The development of low-cost and efficient photocatalysts to achieve water splitting to hydrogen (H2) is highly desirable but remains challenging. Herein, we design and synthesize two porous polymers (Co-Salen-P and Fe-Salen-P) by covalent bonding of salen metal complexes and pyrene chromophores for photocatalytic H2 evolution. The catalytic results demonstrate that the two polymers exhibit excellent catalytic performance for H2 generation in the absence of additional noble-metal photosensitizers and cocatalysts. Particularly, the H2 generation rate of Co-Salen-P reaches as high as 542.5 μmol g-1 h-1, which is not only 6 times higher than that of Fe-Salen-P but also higher than a large amount of reported Pt-assisted photocatalytic systems. Systematic studies show that Co-Salen-P displays faster charge separation and transfer efficiencies, thereby accounting for the significantly improved photocatalytic activity. This study provides a facile and efficient way to fabricate high-performance photocatalysts for H2 production.

Pyrene-Based Nanoporous Covalent Organic Framework for Carboxylation of C-H Bonds with CO2 and Value-Added 2-Oxazolidinones Synthesis under Ambient Conditions

The selective carbon capture and utilization (CCU) as a one-carbon (C1) feedstock offers dual advantages for mitigating the rising atmospheric CO2 content and producing fine chemicals/fuels. In this context, herein, we report the application of a porous bipyridine-functionalized, pyrene-based covalent organic framework (Pybpy-COF) for the stable anchoring of catalytic Ag(0) nanoparticles (NPs) and its catalytic investigation for fixation of CO2 to commodity chemicals at ambient conditions. Notably, Ag@Pybpy-COF showed excellent catalytic activity for the carboxylation of various terminal alkynes to corresponding alkynyl carboxylic acids/phenylpropiolic acids via C-H bond activation under atmospheric pressure conditions. Besides, carboxylative cyclization of various propargylic amines with CO2 to generate 2-oxazolidinones, an important class of antibiotics, has also been achieved under mild conditions. This significant catalytic activity of Ag@Pybpy-COF with wide functional group tolerance is rendered by the presence of highly exposed, alkynophilic Ag(0) catalytic sites decorated on the pore walls of high surface area (787 m2 g-1) Pybpy-COF. Further, density functional theory calculations unveiled the detailed mechanistic path of the Ag@Pybpy-COF-catalyzed transformation of CO2 to alkynyl carboxylic acids and 2-oxazolidinones. Moreover, the catalyst showed high recyclability for several cycles of reuse without significant loss in its catalytic activity and structural rigidity. This work demonstrates the promising application of Pybpy-COF for stable anchoring of Ag NPs for successful transformation of CO2 to valuable commodity chemicals at ambient conditions.

Modulate the Strong Exciton Effect by Na+ Coordination-Induced Trap States: Efficient Photocatalytic H2O2 Production

Due to the strong Coulomb interaction, in most polymer photocatalysts, electron-hole pairs exist in the form of excitons rather than free charge carriers. The giant excitonic effect is a key obstacle to generating free charge carriers. Therefore, effectively regulating the exciton effect is the first step to achieving optimized carrier separation. Here, we used C-ring/g-C3N4 as the prototypical model system to design a photocatalyst with a Na-coordination-induced trap state. We demonstrate that the excitons can be effectively dissociated into charge carriers by combining with the trap state formed by Na doping sites. Encouragingly, signals from the dissociation of excitons into carriers were observed by ultrafast transient spectroscopy. Benefiting from the enhanced exciton dissociation, Na-C/CN displayed a H2O2 production rate of 17.4 mmol·L-1·h-1 with an apparent quantum efficiency up to 26.9% at 380 nm, which is much higher than many other g-C3N4-based photocatalysts. This work explains the effect of cation doping on the exciton-carrier behavior in polymers. Also, it provides a new way to regulate the exciton effect.

Isomeric Dual-Pore Two-Dimensional Covalent Organic Frameworks

Two-dimensional (2D) covalent organic frameworks (COFs) with hierarchical porosity have been increasingly recognized as promising materials in various fields. Besides, the 2D COFs with kagome (kgm) topology can exhibit unique optoelectronic features and have extensive applications. However, rational synthesis of the COFs with kgm topology remains challenging because of competition with a square-lattice topology. Herein, we report two isomeric dual-pore 2D COFs with kgm topology using a novel geometric strategy to reduce the symmetry of their building blocks, which are four-armed naphthalene-based and azulene-based isomeric monomers. Owing to the large dipole moment of azulene, as-prepared azulene-based COF (COF-Az) possesses a considerably narrow band gap of down to 1.37 eV, which is much narrower than the naphthalene-based 2D COF (COF-Nap: 2.28 eV) and is the lowest band gap among reported imine-linked dual-pore 2D COFs. Moreover, COF-Az was used as electrode material in a gas sensor and exhibits high selectivity for NO2, including a high response rate (58.7%) to NO2 (10 ppm), fast recovery (72 s), up to 10 weeks of stability, and resistance to 80% relative humidity, which are superior to those of reported COF-based NO2 gas sensors. The calculation and in situ experimental results indicate that the large dipole moment of azulene boosts the sensitivity of the imine linkages. The usage of isomeric building blocks not only enables the synthesis of 2D COFs with isometric kgm topology but also provides an azulene-based 2D platform for studying the structure-property correlations of COFs.

Three-Dimensional Fully Conjugated Covalent Organic Frameworks for Efficient Photocatalytic Water Splitting

Covalent organic frameworks (COFs) are promising photocatalysts for water splitting, but their efficiency lags behind that of inorganic counterparts partly due to the limited charge transport and optical absorption properties. To overcome this limitation, we proposed to employ three-dimensional (3D) fully conjugated (FC) COFs with a topological assembly of cyclooctatetraene derivatives for photocatalytic water splitting. On the basis of first-principles calculations, we demonstrated that these 3D FC-COFs are semiconductors with exceptional charge transport and optical absorption properties. The carrier mobilities are comparable to those of inorganic semiconductors and superior to the record mobility observed in two-dimensional COFs. Additionally, the 3D FC-COFs exhibit broad visible light absorption with direct band gaps and high optical absorption coefficients. Among them, two 3D FC-COFs are identified for overall water splitting, while three others can facilitate the hydrogen evolution half-reaction. This study pioneers the design of 3D FC-COF photocatalysts, potentially advancing their applications in photocatalysis and optoelectronics.

Blending Aryl Ketone in Covalent Organic Frameworks to Promote Photoinduced Electron Transfer

Aryl-ketone derivatives have been acknowledged as promising organic photocatalysts for photosynthesis. However, they are limited by their photostability and have been less explored for photoinduced electron transfer (PET) applications. Herein we demonstrate a novel strategy to cover the shortage of aryl-ketone photocatalysts and control the photoreactivity by implanting symmetric aryl ketones into the conjugated covalent organic frameworks (COFs). To prove the concept, three comparative materials with the same topology and varied electronic structures were built, adopting truxenone knot and functionalized terephthalaldehyde linkers. Spectroscopic investigation and excited carrier dynamics analysis disclosed improvements in the photostability and electronic transfer efficiency as well as the structure-performance relationships toward N-aryl tetrahydroisoquinoline oxidation. This system provides a robust rule of thumb for designing new-generation aryl-ketone photocatalysts.

Three-Component Donor-π-Acceptor Covalent-Organic Frameworks for Boosting Photocatalytic Hydrogen Evolution

Two-dimensional covalent-organic frameworks (2D COFs) have recently emerged as great prospects for their applications as new photocatalytic platforms in solar-to-hydrogen conversion; nevertheless, their inefficient solar energy capture and fast charge recombination hinder the improvement of photocatalytic hydrogen production performance. Herein, two photoactive three-component donor-π-acceptor (TCDA) materials were constructed using a multicomponent synthesis strategy by introducing electron-deficient triazine and electron-rich benzotrithiophene moieties into frameworks through sp² carbon and imine linkages, respectively. Compared with two-component COFs, the novel TCDA-COFs are more convenient in regulating the inherent photophysical properties, thereby realizing outstanding photocatalytic activity for hydrogen evolution from water. Remarkably, the first sp² carbon-linked TCDA-COF displays an impressive hydrogen evolution rate of 70.8 ± 1.9 mmol g^-1 h^-1 with excellent reusability in the presence of 1 wt % Pt under visible-light illumination (420-780 nm). Utilizing the combination of diversified spectroscopy and theoretical prediction, we show that the full π-conjugated linkage not only effectively broadens the visible-light harvesting of COFs but also enhances charge transfer and separation efficiency.

Modulating Uranium Extraction Performance of Multivariate Covalent Organic Frameworks through Donor-Acceptor Linkers and Amidoxime Nanotraps

Covalent organic frameworks (COFs) can be designed to allow uranium extraction from seawater by incorporating photocatalytic linkers. However, often sacrificial reagents are required for separating photogenerated charges which limits their practical applications. Herein, we present a COF-based adsorption-photocatalysis strategy for selective removal of uranyl from seawater in the absence of sacrificial reagents. A series of ternary and quaternary COFs were synthesized containing the electron-rich linker 2,4,6-triformylphloroglucinol as the electron donor, the electron-deficient linker 4,4'-(thiazolo[5,4-d]thiazole-2,5-diyl)dibenzaldehyde as the acceptor, and amidoxime nanotraps for selective uranyl capture (with the quaternary COFs incorporating [2,2'-bipyridine-5,5'-diamine-Ru(Bp)₂]Cl₂ as a secondary photosensitizer). The ordered porous structure of the quaternary COFs ensured efficient mass transfer during the adsorption-photocatalysis capture of uranium from seawater samples, with photocatalytically generated electrons resulting in the reduction of adsorbed U(VI) to U(IV) in the form of UO₂. A quaternary COF, denoted as COF 2-Ru-AO, possessed a high uranium uptake capacity of 2.45 mg/g/day in natural seawater and good anti-biofouling abilities, surpassing most adsorbents thus far. This work shows that multivariate COF adsorption-photocatalysts can be rationally engineered to work efficiently and stably without sacrificial electron donors, thus opening the pathway for the economic and efficient extraction of uranium from the earth's oceans.

Highly crystalline and water-wettable benzobisthiazole-based covalent organic frameworks for enhanced photocatalytic hydrogen production

Two-dimensional covalent organic frameworks are promising for photocatalysis by virtue of their structural and functional diversity, but generally suffer from low activities relative to their inorganic competitors. To fulfill their full potential requires a rational tailoring of their structures at different scales as well as their surface properties. Herein, we demonstrate benzobisthiazole-based covalent organic frameworks as a superior photocatalyst for hydrogen production. The product features high crystallinity with ordered 2.5-nm-wide cylindrical mesopores and great water wettability. These structural advantages afford our polymeric photocatalyst with fast charge carrier dynamics as evidenced by a range of spectroscopic characterizations and excellent catalytic performances when suspended in solution or supported on melamine foams. Under visible-light irradiation, it enables efficient and stable hydrogen evolution with a production rate of 487 μmol h^-1 (or a mass-specific rate of 48.7 mmol g^-1 h^-1)-far superior to the previous state of the art. We also demonstrate that hydrogen production can be stoichiometrically coupled with the oxidation conversion of biomass as exemplified by the conversion of furfuryl alcohol to 2-furaldehyde.

Suppressing the Excitonic Effect in Covalent Organic Frameworks for Metal-Free Hydrogen Generation

Photocatalytic hydrogen generation is a promising solution for renewable energy production and plays a role in achieving carbon neutrality. Covalent organic frameworks (COFs) with highly designable backbones and inherent pores have emerged as novel photocatalysts, yet the strong excitonic effect in COFs can impede the promotion of energy conversion efficiency. Here, we propose a facile approach to suppress the excitonic effect in COFs, which is by narrowing the band gap and increasing the dielectric screening via a rational backbone design and chemical modifications. Based on the GW-BSE method, we uncover a linear relationship between the electronic dielectric constant and the inverse square of the optical band gap of COFs of the Lieb lattice. We further demonstrate that both reduced exciton binding energy and enhanced sunlight absorption can be simultaneously realized in COFs with a narrow band gap. Specifically, we show that one of our designed COFs whose exciton binding energy is nearly half that of g-C₃N₄ is capable of metal-free hydrogen production under near-infrared light irradiation. Our results showcase an effective method to suppress the excitonic effect in COFs and also pave the way for their applications in photocatalytic, photovoltaic, and other related solar energy conversions.

Imine-Linked Covalent Organic Framework with a Naphthalene Moiety as a Sensitive Phosphate Ion Sensing

Due to the excellent ion-sensing potential of covalent organic frameworks (COFs), the new imine-linked conjugated COF (IC-COF) is synthesized through a water-based synthesis reaction between 1,5-diaminonaphthalene and 2,4,6-tris(4-formylphenoxy)-1,3,5-triazine to create a luminescence sensor. It is noteworthy that the green synthesized IC-COF shows excellent selectivity to phosphate ions (PO₄^3-) with a detection limit of 0.61 μM. The recyclability performance of IC-COF is high, indicating that it can be reused without a significant reduction in performance (5.2% decline after 5 cycles). Theoretical calculations using the density functional theory are performed on the IC-COF-PO₄^3- and IC-COF-Cu⁺ complexes to explore the sensing mechanism. The fluorescence quenching in the presence of PO₄^3- ions is attributed to the difference between PO₄^3- binding sites to the IC-COF compared to Cu⁺, which leads to the considerable change in the IC-COF absorption spectrum from 400 to 600 nm.

Rapid detection of donor-dependent photocatalytic hydrogen evolution by NMR spectroscopy

Understanding molecular processes at nanoparticle surfaces is essential for designing active photocatalytic materials. Here, we utilize nuclear magnetic resonance (NMR) spectroscopy to track photocatalytic hydrogen evolution using donor molecules and water isotopologues. Pt-TiO₂ catalysts were prepared and used for isotopic hydrogen evolution reactions using alcohols as electron donors. ¹H NMR monitoring revealed that evolution of the H₂ and HD species is accompanied by the oxidation of donor molecules. The isotopic selectivity in the hydrogen evolution reaction gives rise to formal overpotential. Based on a comparison of the rates of hydrogen evolution and donor oxidation, we propose the use of ethanol as an efficient electron donor for the hydrogen evolution reaction without re-oxidation of radical intermediates.

Fabrication of a Covalent Organic Framework-Based Heterojunction via Coupling with ZnAgInS Nanosphere with High Photocatalytic Activity

Covalent organic frameworks (COFs) exhibit visible-light activity for the degradation of organic pollutants. However, the recombination rates of their photoinduced electron-hole pairs are relatively high, limiting their practical application. In this work, we fabricated a 1,3,5-triformylphloroglucinol (Tp) and p-phenylenediamine (Pa-1) (TpPa-1) COF-based heterojunction through coupling the TpPa-1 COF with a ZnAgInS nanosphere via a facile oil bath heating method. The results show that the prepared heterojunction exhibits outstanding catalytic activity for the degradation of high concentrations the antibiotic tetracycline (TC) and the dye rhodamine B (RhB), which is driven by simulated sunlight. Its degradation rates for RhB and TC were 30× and 18× higher than that of the pure TpPa-1 COF, respectively. The greatly enhanced photocatalytic performances can be ascribed to the formed heterojunction with good band-gap match, which promotes the migration and separation of light-induced electrons and holes and increases both light absorbance and the specific surface area. This study introduces an effective and feasible strategy for improving the photocatalytic performances of COFs via subtly integrating TpPa-1 COFs with a ZnAgInS nanosphere into an organic-inorganic hybrid. The results of the photocatalytic experiments indicate that the fabricated hybrid has a potential application in the highly efficient removal of organic pollutants.

Reconstructed covalent organic frameworks

Covalent organic frameworks (COFs) are distinguished from other organic polymers by their crystallinity^1-3, but it remains challenging to obtain robust, highly crystalline COFs because the framework-forming reactions are poorly reversible^4,5. More reversible chemistry can improve crystallinity^6-9, but this typically yields COFs with poor physicochemical stability and limited application scope⁵. Here we report a general and scalable protocol to prepare robust, highly crystalline imine COFs, based on an unexpected framework reconstruction. In contrast to standard approaches in which monomers are initially randomly aligned, our method involves the pre-organization of monomers using a reversible and removable covalent tether, followed by confined polymerization. This reconstruction route produces reconstructed COFs with greatly enhanced crystallinity and much higher porosity by means of a simple vacuum-free synthetic procedure. The increased crystallinity in the reconstructed COFs improves charge carrier transport, leading to sacrificial photocatalytic hydrogen evolution rates of up to 27.98 mmol h^-1 g^-1. This nanoconfinement-assisted reconstruction strategy is a step towards programming function in organic materials through atomistic structural control.

s-Tetrazine-Bridged Photochromic Aromatic Framework Material

Integrating fluorescent chromophores in aromatic frameworks could not only prevent aggregation-induced quenching caused by the π-π stacking interaction between the chromophore components but also confer new fluorescence properties. Herein, we report the fabrication of s-tetrazine-bridged aromatic frameworks TzAF by the incorporation of the smallest aromatic fluorophore, s-tetrazine (Tz), into the skeleton of a tetrahedrally connected lattice of aromatic frameworks. The thin films of TzAF coated on silica gel plates were found to exhibit reversible photoswitching fluorescence characteristics under alternate UV and visible-light irradiations with excellent fluorescence stability and high on/off contrast. The repeatable "on/off"fluorescence photoswitchability of the TzAF thin films was mechanistically attributed to light-induced reversible transformation between TzAF's neutral and radical states.

Tuning Photoexcited Charge Transfer in Imine-Linked Two-Dimensional Covalent Organic Frameworks

The generation of a long-lived charge-separated state in versatile π-conjugated two-dimensional covalent organic frameworks (2D COFs), a process essential to extending their great potentials in advanced semiconducting applications, is yet fully elucidated. Herein, we report a systematic investigation of the photophysical properties of three highly crystalline imine-linked 2D COFs using steady-state and transient absorption spectroscopy accompanied by time-dependent density functional theory (TDDFT) calculations. The different electron affinity between 5,5',5″-(1,3,5-benzenetriyl)tris(2-pyridinecarboxaldehyde) (BTPA) and three tunable electron-donating/accepting triamine monomers dominated the formation of the excited-state, charge-transfer direction, and lifetime. A prominent charge transfer from electron-rich 4,4',4″-triaminotriphenylamine (TAPA) to BTPA in COF_TAPA-BTPA led to the long-lived charge-separated state, which was attributed to a greater degree of delocalization compared to the two other COFs. These results provide fundamental insight into the importance of structure-property correlation for designing advanced photoactive 2D COF materials with the efficient charge transfer and long-lived charge-separated state.

Enhancing Photoelectric Response of an Au@Ag/AgI Schottky Contact through Regulation of Localized Surface Plasmon Resonance

Carrier generation and migration are both pivotal to photoelectric (PE) response. Formation of a Schottky contact is conducive to promote carrier migration but cannot fundamentally magnify carrier generation, limiting the eventual PE performance. In this work, an Au@Ag/AgI Schottky contact is established by in situ growth of AgI nanotriangles on the surface of Au@Ag nanoparticles (NPs), and PE enhancement of the Schottky contact is realized by regulating localized surface plasmon resonance (LSPR) properties. In comparison with Ag/AgI Schottky contact, assembly of Au NPs in the center of Ag NPs adjusts the dominated LSPR property from hot-electron transfer (HET) to plasmon-induced resonance energy transfer (PIRET). With the concurrent manipulation of HET and PIRET, additional energy can be employed for carrier generation, while photogenerated electrons offset by hot electrons are reduced, which jointly enlarges PE responses of the Au@Ag/AgI Schottky contact up to 4 times. Benefitted from the etching of thiols to Ag-based materials, the Au@Ag/AgI Schottky contact is further applied to the construction of a photoelectrochemical cysteine sensor. This work proposes a general strategy to enhance PE responses of Schottky contacts, which may advance the design of LSPR-related PE systems.

Rational Design and Application of Covalent Organic Frameworks for Solar Fuel Production

Harnessing solar energy and converting it into renewable fuels by chemical processes, such as water splitting and carbon dioxide (CO2) reduction, is a highly promising yet challenging strategy to mitigate the effects arising from the global energy crisis and serious environmental concerns. In recent years, covalent organic framework (COF)-based materials have gained substantial research interest because of their diversified architecture, tunable composition, large surface area, and high thermal and chemical stability. Their tunable band structure and significant light absorption with higher charge separation efficiency of photoinduced carriers make them suitable candidates for photocatalytic applications in hydrogen (H2) generation, CO2 conversion, and various organic transformation reactions. In this article, we describe the recent progress in the topology design and synthesis method of COF-based nanomaterials by elucidating the structure-property correlations for photocatalytic hydrogen generation and CO2 reduction applications. The effect of using various kinds of 2D and 3D COFs and strategies to control the morphology and enhance the photocatalytic activity is also summarized. Finally, the key challenges and perspectives in the field are highlighted for the future development of highly efficient COF-based photocatalysts.

Modulating the Stacking Model of Covalent Organic Framework Isomers with Different Generation Efficiencies of Reactive Oxygen Species

The development of a facile synthesis and controllable layer stacking approach for covalent organic frameworks (COFs) is an important issue for modulating their properties and realizing their application diversity. Herein, three COF isomers with different stacking models (eclipsed AA, staggered AB, and ABC stacking) were obtained by modulating the reaction temperature and solvent medium. Experimental and theoretical calculations show that the ABC stacking isomer obtained at room temperature is the kinetic product, while the AA stacking isomer prepared by the solvothermal method is a thermodynamic product. Owing to the tautomerism involved in the reaction process, these isomers possess different ratios of enol and keto forms. Thus, they exhibit different generation efficiencies of Type I and Type II reactive oxygen species (ROS). The ABC stacking isomers could be employed as metal-free heterogeneous photocatalysts for visible-light-induced oxidation of amines to imines, owing to the highest generation efficiency of Type I ROS.

Light-Driven Hydrogen Evolution Assisted by Covalent Organic Frameworks

Covalent organic frameworks (COFs) are crystalline porous organic polymers built from covalent organic blocks that can be photochemically active when incorporating organic semiconducting units, such as triazine rings or diacetylene bridges. The bandgap, charge separation capacity, porosity, wettability, and chemical stability of COFs can be tuned by properly choosing their constitutive building blocks, by extension of conjugation, by adjustment of the size and crystallinity of the pores, and by synthetic post-functionalization. This review focuses on the recent uses of COFs as photoactive platforms for the hydrogen evolution reaction (HER), in which usually metal nanoparticles (NPs) or metallic compounds (generally Pt-based) act as co-catalysts. The most promising COF-based photocatalytic HER systems will be discussed, and special emphasis will be placed on rationalizing their structure and light-harvesting properties in relation to their catalytic activity and stability under turnover conditions. Finally, the aspects that need to be improved in the coming years will be discussed, such as the degree of dispersibility in water, the global photocatalytic efficiency, and the robustness and stability of the hybrid systems, putting emphasis on both the COF and the metal co-catalyst.

Free Charge Carriers in Homo-Sorted π-Stacks of Donor-Acceptor Conjugates

Inspired by the high photoconversion efficiency observed in natural light-harvesting systems, the hierarchical organization of molecular building blocks has gained impetus in the past few decades. Particularly, the molecular arrangement and packing in the active layer of organic solar cells (OSCs) have garnered significant attention due to the decisive role of the nature of donor/acceptor (D/A) heterojunctions in charge carrier generation and ultimately the power conversion efficiency. This review focuses on the recent developments in emergent optoelectronic properties exhibited by self-sorted donor-on-donor/acceptor-on-acceptor arrangement of covalently linked D-A systems, highlighting the ultrafast excited state dynamics of charge transfer and transport. Segregated organization of donors and acceptors promotes the delocalization of photoinduced charges among the stacks, engendering an enhanced charge separation lifetime and percolation pathways with ambipolar conductivity and charge carrier yield. Covalently linking donors and acceptors ensure a sufficient D-A interface and interchromophoric electronic coupling as required for faster charge separation while providing better control over their supramolecular assemblies. The design strategies to attain D-A conjugate assemblies with optimal charge carrier generation efficiency, the scope of their application compared to state-of-the-art OSCs, current challenges, and future opportunities are discussed in the review. An integrated overview of rational design approaches derived from the comprehension of underlying photoinduced processes can pave the way toward superior optoelectronic devices and bring in new possibilities to the avenue of functional supramolecular architectures.

Rational Modification of Two-Dimensional Donor-Acceptor Covalent Organic Frameworks for Enhanced Visible Light Photocatalytic Activity

Covalent organic frameworks (COFs) are promising crystalline materials for photocatalytic solar- to hydrogen-energy conversion due to the tunable chemical structures and energy band gaps. Herein, we report a chemical modification strategy for improving the photocatalytic activity of COFs. A benzene-1,3,5-tricarbaldehyde (BT)- and benzothiadiazole derivative-based two-dimensional donor-acceptor (D-A) COF, denoted as BT-COF, were fabricated and further modified by using an alternative electron-donating unit, 2-hydroxybenzene-1,3,5-tricarbaldehyde (HBT), to the polycondensation reaction, yielding HBT-COF with an enhanced internal D-A effect and hydrophilicity. Interestingly, the photocatalytic H₂ production rate of HBT-COF reaches 19.00 μmol h^-1, which is 5 times higher than that of BT-COF (3.40 μmol h^-1) under visible light irradiation. The increase in photocatalytic activity of HBT-COF is rationally attributed to finely tuned energy levels and improved wettability, which in turn leads to broadened visible light absorption, efficient photoinduced charge separation and transfer, and enhanced interactions between the COF catalyst and reaction substrates. The present results demonstrate that a subtle structural modification can significantly modulate the band structure and interfacial property, thus providing a feasible strategy for the optimization of COF-based photocatalytic systems.

Constructing Heterogeneous Direct Z-Scheme Photocatalysts Based on Metal-Organic Cages and Graphitic-C3N4 for High-Efficiency Photocatalytic Water Splitting

The development of artificial devices that mimic the highly efficient and ingenious photosystems in nature is worthy of in-depth study. A metal-organic cage (MOC) Pd₂(M-4)₄(BF₄)₄, denoted as MOC-Q1, integrating four organic photosensitized ligands M-4 and two Pd²⁺ catalytic centers is designed for a photochemical molecular device (PMD). MOC-Q1 is successfully immobilized on graphitic carbon nitride (g-C₃N₄) by hydrogen bonds to obtain a robust heterogeneous direct Z-scheme g-C₃N₄/MOC-Q1 photocatalyst for H₂ generation under visible light. The optimized g-C₃N₄/MOC-Q1 (2 wt %) system shows high hydrogen evolution activity (4495 μmol g^-1 h^-1 based on the catalyst mass) and exhibits stable performances for 25 h (a turnover number of 19,268 based on MOC-Q1), significantly outperforming pure MOC-Q1, g-C₃N₄, and comparsion materials Pd/g-C₃N₄/M-4, which is the highest one of all reported heterogeneous MOC-based photocatalysts under visible irradiation. This enhancement can be ascribed to the synergistic effects of high-efficient electron transfer, extended visible-light response region, and good protective environment for MOC-Q1 arising from an efficient direct Z-scheme heterostructure of g-C₃N₄/MOC-Q1. This rationally designed and synthesized MOC/g-C₃N₄-based heterogeneous PMD is expected to have great potential in photocatalytic water splitting.

Graphitic C2N3: An Allotrope of g-C3N4 Containing Active Azide Pentagons as Metal-Free Photocatalyst for Abundant H2 Bubble Evolution

A g-C₃N₄ allotrope, a curved leaf-like graphitic C₂N₃ (g-C₂N₃) with an intrinsic spontaneous polarization electric field (ISPEF), has been constructed for efficient solar energy conversion into H₂ energy via photocatalytic H₂O splitting. The curved leaf-like π-delocalization g-C₂N₃ was composed of aromatic azide pentagons and normal triazine hexagons obtained by cycloaddition between -C≡N groups from dicyandiamide polymerization and azide from the heat-treated polypyrrole fibers. Under light irradiation (λ > 420 nm), photo-generated charges are driven to separate efficiently and transfer from bulk to active sites of the surface under ISPEF that is opposite to the Coulomb field. Consequently, without any cocatalyst, g-C₃N₄ allotrope demonstrates a very high H₂-production activity of 14.9 mmol g^-1 h^-1 accompanied by a lot of H₂ bubbles, which is 2.6 times of g-C₃N₄ loading with Pt. In comparison with the reported metal-free photocatalysts or those supported with noble metals, g-C₃N₄ allotrope (i.e., leaf-like g-C₂N₃) is confirmed to be the best metal-free photocatalyst for H₂O splitting into H₂ fuel so far. The contructed leaf-like g-C₂N₃ with SPEF supplies a suitable platform for solar energy conversion into H₂ fuel, which actively contributes to clean energy production.

Pt(II)-Decorated Covalent Organic Framework for Photocatalytic Difluoroalkylation and Oxidative Cyclization Reactions

A new covalent organic framework (COF) based on imine bonds was assembled from 2-(4-formylphenyl)-5-formylpyridine and 1,3,6,8-tetrakis(4-aminophenyl)pyrene, which showed an interesting dual-pore structure with high crystallinity. Postmetallation of the COF with Pt occurred selectively at the N donor (imine and pyridyl) in the larger pores. The metallated COF served as an excellent recyclable heterogeneous photocatalyst for decarboxylative difluoroalkylation and oxidative cyclization reactions.

Covalent organic frameworks: an ideal platform for designing ordered materials and advanced applications

Covalent organic frameworks offer a molecular platform for integrating organic units into periodically ordered yet extended 2D and 3D polymers to create topologically well-defined polygonal lattices and built-in discrete micropores and/or mesopores.

A conductive metal-organic framework photoanode

We report the development of photosensitizing arrays based on conductive metal–organic frameworks (MOFs) that enable light harvesting and efficient charge separation. Zn₂TTFTB (TTFTB = tetrathiafulvalene tetrabenzoate) MOFs are deposited directly onto TiO₂ photoanodes and structurally characterized by pXRD and EXAFS measurements. Photoinduced interfacial charge transfer dynamics are investigated by combining time-resolved THz spectroscopy and quantum dynamics simulations. Sub-600 fs electron injection into TiO₂ is observed for Zn₂TTFTB–TiO₂ and is compared to the corresponding dynamics for TTFTB–TiO₂ analogues that lack the extended MOF architecture. Rapid electron injection from the MOF into TiO₂ is enhanced by facile migration of the hole away from the interfacial region. Holes migrate through strongly coupled HOMO orbitals localized on the tetrathiafulvalene cores of the columnar stacks of the MOF, whereas electrons are less easily transferred through the spiral staircase arrangement of phenyl substituents of the MOF. The reported findings suggest that conductive MOFs could be exploited as novel photosensitizing arrays in applications to slow, and thereby make difficult, photocatalytic reactions such as those required for water-splitting in artificial photosynthesis.

We report the development of photosensitizing arrays based on conductive metal–organic frameworks (MOFs) that enable light harvesting and efficient charge separation.

Solving the COF trilemma: towards crystalline, stable and functional covalent organic frameworks

Strategies in covalent organic frameworks and adjacent fields are highlighted for designing stable, ordered and functional materials.