Construction of σ-Aromatic AlB2 Ring via Borane Coupling with a Dicoordinate Cyclic (Alkyl)(Amino)Aluminyl Anion

Mercury-Group 13 Metal Covalent Bonds: A Systematic Comparison of Aluminyl, Gallyl and Indyl Metallo-ligands

Bimetallic compounds containing direct metal-group 13 element bonds have been shown to display unprecedented patterns of cooperative reactivity towards small molecules, which can be influenced by the identity of the group 13 element. In this context, we present here a systematic appraisal of group 13 metallo-ligands of the type [(NON)E]- (NON=4,5-bis(2,6-diisopropylanilido)-2,7-di-tert-butyl-9,9-dimethylxanthene) for E=Al, Ga and In, through a comparison of structural and spectroscopic parameters associated with the trans L or X ligands in linear d10 complexes of the types LM{E(NON)} and XM'{E(NON)}. These studies are facilitated by convenient syntheses (from the In(I) precursor, InCp) of the potassium indyl species [{K(NON)In}⋅KCp]n (1) and [(18-crown-6)2K2Cp] [(NON)In] (1'), and lead to the first structural characterisation of Ag-In and Hg-E (E=Al, In) covalent bonds. The resulting structural, spectroscopic and quantum chemical probes of Ag/Hg complexes are consistent with markedly stronger σ-donor capabilities of the aluminyl ligand, [(NON)Al]-, over its gallium and indium counterparts.

Bis(Aluminyl)Magnesium: A Source of Nucleophilic or Radical Aluminium-Centred Reactivity

The homoleptic magnesium bis(aluminyl) compound Mg[Al(NON)]2 (NON=4,5-bis(2,6-diisopropylanilido)-2,7-di-tert-butyl-9,9-dimethylxanthene) can be accessed from K2[Al(NON)]2 and MgI2 and shown to possess a non-linear geometry (∠Al-Mg-Al=164.8(1)°) primarily due to the influence of dispersion interactions. This compound acts a four-electron reservoir in the reductive de-fluorination of SF6, and reacts thermally with polar substrates such as MeI via nucleophilic attack through aluminium, consistent with the QT-AIM charges calculated for the metal centres, and a formal description as a Al(I)-Mg(II)-Al(I) trimetallic. On the other hand, under photolytic activation, the reaction with 1,5-cyclooctadiene leads to the stereo-selective generation of transannular cycloaddition products consistent with radical based chemistry, emphasizing the covalent nature of the Mg-Al bonds and a description as a Al(II)-Mg(0)-Al(II) synthon. Consistently, photolysis of Mg[Al(NON)]2 in hexane in the absence of COD generates [Al(NON)]2 together with magnesium metal.

Synthesis, Isolation, and Reactivity Studies of 'Naked' Acyclic Gallyl and Indyl Anions

By exploiting the electronic capabilities of the N-heterocyclic boryloxy (NHBO) ligand, we have synthesized "naked" acyclic gallyl [Ga{OB(NDippCH)2}2]- and indyl [In{OB(NDippCH)2}2]- anions (as their [K(2.2.2-crypt)]+ salts) through K+ abstraction from [KGa{OB(NDippCH)2}2] and [KIn{OB(NDippCH)2}2] using 2.2.2-crypt. These systems represent the first O-ligated gallyl/indyl systems, are ultimately accessed from cyclopentadienyl GaI/InI precursors by substitution chemistry, and display nucleophilic reactivity which is strongly influenced by the presence (or otherwise) of the K+ counterion.

Reversible [4 + 1] Cycloaddition of Arenes by a "Naked" Acyclic Aluminyl Compound

The large steric profile of the N-heterocyclic boryloxy ligand, -OB(NDippCH)2, and its ability to stabilize the metal-centered HOMO, are exploited in the synthesis of the first example of a "naked" acyclic aluminyl complex, [K(2.2.2-crypt)][Al{OB(NDippCH)2}2]. This system, which is formed by substitution at AlI (rather than reduction of AlIII), represents the first O-ligated aluminyl compound and is shown to be capable of hitherto unprecedented reversible single-site [4 + 1] cycloaddition of benzene. This chemistry and the unusual regioselectivity of the related cycloaddition of anthracene are shown to be highly dependent on the availability (or otherwise) of the K+ countercation.

Recent advances in the chemistry of isolable carbene analogues with group 13-15 elements

Carbenes (R2C:), compounds with a divalent carbon atom containing only six valence shell electrons, have evolved into a broader class with the replacement of the carbene carbon or the RC moiety with main group elements, leading to the creation of main group carbene analogues. These analogues, mirroring the electronic structure of carbenes (a lone pair of electrons and an empty orbital), demonstrate unique reactivity. Over the last three decades, this area has seen substantial advancements, paralleling the innovations in carbene chemistry. Recent studies have revealed a spectrum of unique carbene analogues, such as monocoordinate aluminylenes, nitrenes, and bismuthinidenes, notable for their extraordinary properties and diverse reactivity, offering promising applications in small molecule activation. This review delves into the isolable main group carbene analogues that are in the forefront from 2010 and beyond, spanning elements from group 13 (B, Al, Ga, In, and Tl), group 14 (Si, Ge, Sn, and Pb) and group 15 (N, P, As, Sb, and Bi). Specifically, this review focuses on the potential amphiphilic species that possess both lone pairs of electrons and vacant orbitals. We detail their comprehensive synthesis and stabilization strategies, outlining the reactivity arising from their distinct structural characteristics.

Access to a peri-Annulated Aluminium Compound via C-H Bond Activation by a Cyclic Bis-Aluminylene

Carbocyclic aluminium halides [(ADC)AlX2]2 (2-X) (X=F, Cl, and I) based on an anionic dicarbene (ADC=PhC{N(Dipp)C}2, Dipp = 2,6-iPr2C6H3) framework are prepared as crystalline solids by dehydrohalogenations of the alane [(ADC)AlH2]2 (1). KC8 reduction of 2-I affords the peri-annulated Al(III) compound [(ADCH)AlH]2 (4) (ADCH=PhC{N(Dipp)C2(DippH)N}, DippH=2-iPr,6-(Me2C)C6H3)) as a colorless crystalline solid in 76 % yield. The formation of 4 suggests intramolecular insertion of the putative bis-aluminylene species [(ADC)Al]2 (3) into the methine C-H bond of HCMe2 group. Calculations predict singlet ground state for 3, while the conversion of 3 into 4 is thermodynamically favored by 61 kcal/mol. Compounds 2-F, 2-Cl, 2-I, and 4 have been characterized by NMR spectroscopy and their solid-state molecular structures have been established by single crystal X-ray diffraction.

Alumanyl-Samarium(II): Synthesis, Characterization, and Reactivity Studies

Metal-metal bonded species involving lanthanides are intriguing but rare. The recently reported salt metathesis reaction of an Al anion and SmI2(thf)2 yields novel heterometallic compound possessing two distinctive Al-Sm bonds. Although the Al-Sm bonds were considerably long [3.518(1) and 3.543(1) Å], DFT calculations indicated polar character of the Alδ--Smδ+ bonds. This is the first example of lanthanide species containing X-type Al ligands. Reactivity studies have demonstrated that the introduction of Sm(II) produces unique reactivity. The reaction with carbodiimide led to an insertion of carbodiimide into the Al-Sm bonds and reductive coupling of carbodiimide to create an oxalamidinate moiety, facilitated by Sm(II). Exposure of the Al-Sm-Al complex toward ethylene furnished a Sm(II) salt of anionic aluminacyclopropane that was spontaneously isomerized to a 1,4-dialuminacyclohexane derivative. The important role of Sm(II) to facilitate the ring expansion through an alkyl-relay mechanism was elucidated by DFT calculations.

Mechanochemical Synthesis of Non-Solvated Dialkylalumanyl Anion and XPS Characterization of Al(I) and Al(II) Species

A non-solvated alkyl-substituted Al(I) anion dimer was synthesized by a reduction of haloalumane precursor using a mechanochemical method. The crystallographic and theoretical analysis revealed its structure and electronic properties. Experimental XPS analysis of the Al(I) anions with reference compounds revealed the lower Al 2p binding energy corresponds to the lower oxidation state of Al species. It should be emphasized that the experimentally obtained XPS binding energies were reproduced by delta SCF calculations and were linearly correlated with NPA charges and 2p orbital energies.

Carbon-carbon bond activation by Mg, Al, and Zn complexes

Examples of carbon-carbon bond activation reactions at Mg, Al, and Zn are described in this review. Several distinct mechanisms for C-C bond activation at these metals have been proposed, with the key C-C bond activation step occurring by (i) α-alkyl elimination, (ii) β-alkyl elimination, (iii) oxidative addition, or (iv) an electrocyclic reaction. Many of the known pathways involve an overall 2-electron redox process. Despite this, the direct oxidative addition of C-C bonds to these metals is relatively rare, instead most reactions occur through initial installation of the metal on a hydrocarbon scaffold (e.g. by a cycloaddition reaction or hydrometallation) followed by an α-alkyl or β-alkyl elimination step. Emerging applications of Mg, Al, and Zn complexes as catalysts for the functionalisation of C-C bonds are also discussed.

Seven-Membered Cyclic Diamidoalumanyls of Heavier Alkali Metals: Structures and C-H Activation of Arenes

Like the previously reported potassium-based system, rubidium and cesium reduction of [{SiNDipp}AlI] ({SiNDipp} = {CH2SiMe2NDipp}2) with the heavier alkali metals [M = Rb and Cs] provides dimeric group 1 alumanyl derivatives, [{SiNDipp}AlM]2. In contrast, similar treatment with sodium results in over-reduction and incorporation of a formal equivalent of [{SiNDipp}Na2] into the resultant sodium alumanyl species. The dimeric K, Rb, and Cs compounds display a variable efficacy toward the C-H oxidative addition of arene C-H bonds at elevated temperatures (Cs > Rb > K, 110 °C) to yield (hydrido)(organo)aluminate species. Consistent with the synthetic experimental observations, computational (DFT) assessment of the benzene C-H activation indicates that rate-determining attack of the Al(I) nucleophile within the dimeric species is facilitated by π-engagement of the arene with the electrophilic M+ cation, which becomes increasingly favorable as group 1 is descended.

Aluminum-Boron Bond Formation by Boron Ester Oxidative Addition at an Alumanyl Anion

The potassium diamidoalumanyl, [K{Al(SiNDipp)}]2 (SiNDipp = {CH2SiMe2NDipp}2), reacts with the terminal B-O bonds of pinacolato boron esters, ROBpin (R = Me, i-Pr), and B(OMe)3 to provide potsassium (alkoxy)borylaluminate derivatives, [K{Al(SiNDipp)(OR)(Bpin)}]n (R = Me, n = 2; R = i-Pr, n = ∞) and [K{Al(SiNDipp)(OMe)(B(OMe)2)}]∞, comprising Al-B σ bonds. An initial assay of the reactivity of these species with the heteroallene molecules, N,N'-diisopropylcarbodiimide and CO2, highlights the kinetic inaccessibility of their Al-B bonds; only decomposition at high temperature is observed with the carbodiimide, whereas CO2 preferentially inserts into the Al-O bond of [K{Al(SiNDipp)(OMe)(Bpin)}]2 to provide a dimeric methyl carbonate species. Treatment of the acyclic dimethoxyboryl species, however, successfully liberates a terminal alumaboronic ester featuring trigonal N2Al-BO2 coordination environments at both boron and aluminum.

Controlled reductive C-C coupling of isocyanides promoted by an aluminyl anion

We report the reaction of the potassium aluminyl, K[Al(NON)] ([NON]^2- = [O(SiMe₂NDipp)₂]^2-, Dipp = 2,6-iPr₂C₆H₃) with a series of isocyanide substrates (R-NC). In the case of tBu-NC, degradation of the isocyanide was observed generating an isomeric mixture of the corresponding aluminium cyanido-κC and -κN compounds, K[Al(NON)(H)(CN)]/K[Al(NON)(H)(NC)]. The reaction with 2,6-dimethylphenyl isocyanide (Dmp-NC), gave a C₃-homologation product, which in addition to C-C bond formation showed dearomatisation of one of the aromatic substituents. In contrast, using adamantyl isocyanide Ad-NC allowed both the C₂- and C₃-homologation products to be isolated, allowing a degree of control to be exercised over the chain growth process. These data also show that the reaction proceeds through a stepwise addition, supported in this study by the synthesis of the mixed [(Ad-NC)₂(Dmp-NC)]^2- product. Computational analysis of the bonding within the homologised products confirm a high degree of multiple bond character in the exocyclic ketenimine units of the C₂- and C₃-products. In addition, the mechanism of chain growth was investigated, identifying different possible pathways leading to the observed products, and highlighting the importance of the potassium cation in formation of the initial C₂-chain.

Three-Membered Aluminacycles

Three-membered-ring scaffolds of carbocycles, namely, cyclopropanes and cyclopropenes, are ubiquitous in natural products and pharmaceutical molecules. These molecules exhibit a peculiar reactivity, and their applications as synthetic intermediates and versatile building blocks in organic synthesis have been extensively studied over the past century. The incorporation of heteroatoms into three-membered cyclic structures has attracted significant attention, reflecting fundamental differences in their electronic/geometric structures and reactivities compared to their carbon congeners and their associated potential for exploitation in applications. Recently, the chemistry of low-valent aluminum species, alumylenes, dialumenes, and aluminyl anions, has dramatically developed, which has allowed access to hitherto unprecedented aluminacycles. This Perspective focuses upon advances in the chemistry of three-membered aluminacycles, including their synthetic protocols, spectroscopic and structural properties, and reactivity toward various substrates and small molecules.

Evidence of AlII Radical Addition to Benzene

Electrophilic Al^III species have long dominated the aluminum reactivity towards arenes. Recently, nucleophilic low-valent Al^I aluminyl anions have showcased oxidative additions towards arenes C-C and/or C-H bonds. Herein, we communicate compelling evidence of an Al^II radical addition reaction to the benzene ring. The electron reduction of a ligand stabilized precursor with KC₈ in benzene furnishes a double addition to the benzene ring instead of a C-H bond activation, producing the corresponding cyclohexa-1,3(orl,4)-dienes as Birch-type reduction product. X-ray crystallographic analysis, EPR spectroscopy, and DFT results suggest this reactivity proceeds through a stable Al^II radical intermediate, whose stability is a consequence of a rigid scaffold in combination with strong steric protection.

Understanding the role of ring strain in β-alkyl migration at Mg and Zn centres

The activation of C-C σ-bonds within strained three- and four-membered hydrocarbons at electrophilic Mg and Zn centres is reported. This was achieved in a two-step process involving (i) hydrometallation of a methylidene cycloalkane followed by (ii) intramolecular C-C bond activation. While hydrometallation of methylidene cyclopropane, cyclobutane, cyclopentane and cyclohexane occurs for both Mg and Zn reagents, the C-C bond activation step is sensitive to ring size. For Mg, both cyclopropane and cyclobutane rings participate in C-C bond activation. For Zn, only the smallest cyclopropane ring reacts. These findings were used to expand the scope of catalytic hydrosilylation of C-C σ-bonds to include cyclobutane rings. The mechanism of C-C σ-bond activation was investigated through kinetic analysis (Eyring), spectroscopic observation of intermediates, and a comprehensive series of DFT calculations, including activation strain analysis. Based on our current understanding, C-C bond activation is proposed to occur by a β-alkyl migration step. β-Alkyl migration is more facile for more strained rings and occurs with lower barriers for Mg compared to Zn. Relief of ring strain is a key factor in determining the thermodynamics of C-C bond activation, but not in stabilising the transition state for β-alkyl migration. Rather, we ascribe the differences in reactivity to the stabilising interaction between the metal centre and the hydrocarbon ring-system, with the smaller rings and more electropositive metal (Mg) leading to a smaller destabilisation interaction energy as the transition state is approached. Our findings represent the first example of C-C bond activation at Zn and provide detailed new insight into the factors at play in β-alkyl migration at main group centres.

Probing a General Strategy to Break the C-C Bond of Benzene by a Cyclic (Alkyl)(Amino)Aluminyl Anion

The oxidative addition of C-C bonds in aromatic hydrocarbons by low valent main group species has attracted considerable attention from both theoretical and experimental chemists due to the big challenge in breaking their aromaticity. Herein, a general strategy to break the C-C bonds in benzene by cyclic (alkyl)(amino)aluminyl anion is demonstrated via density functional theory (DFT) calculations. The results suggest that the activation of the C-C bond of benzene by this anion is both kinetically and thermodynamically unfavorable whereas introducing electron-withdrawing groups makes such C-C bond activation becomes favorable both kinetically and thermodynamically. Such a sharp change on the kinetics and thermodynamics could be rationalized by the frontier molecular orbital theory by decreasing the lowest unoccupied molecular orbitals of the mono- and disubstituted benzenes. Aromaticity is found to stabilize the transition state for the ring open step. All these findings can help develop the chemistry of small-molecule activation.

High-Level Coupled-Cluster Study on Substituent Effects in H2 Activation by Low-Valent Aluminyl Anions

The synthesis of novel aluminyl anion complexes has been well exploited in recent years. Moreover, the elucidation of the structure and reactivity of these complexes opens the path toward a new understanding of low-valent aluminum complexes and their chemistry. This work computationally treats the substituent effect on aluminyl anions to discover suitable alternatives for H₂ activation at a high level of theory utilizing coupled-cluster techniques extrapolated to the complete basis set. The results reveal that the simplest AlH₂^- system is the most reactive toward the activation of H₂, but due to the low steric demand, severe difficulty in the stabilization of this system makes its use nonviable. However, the results indicate that, in principle, aluminyl systems with -C, -CN, -NC, and -N chelating centers would be the best choices of ligand toward the activation of molecular hydrogen by taking care of suitable steric demand to prevent dimerization of the catalysts. Furthermore, computations show that monosubstitution (besides -H) in aluminyl anions is preferred over disubstitution. So our predictions show that bidentate ligands may yield less reactive aluminyl anions to activate H₂ than monodentate ones.

Room-Temperature C-C σ-Bond Activation of Biphenylene Derivatives on Cu(111)

Activating the strong C-C σ-bond is a central problem in organic synthesis. Directly generating activated C centers by metalation of structures containing strained four-membered rings is one maneuver often employed in multistep syntheses. This usually requires high temperatures and/or precious transition metals. In this paper, we report an unprecedented C-C σ-bond activation at room temperature on Cu(111). By using bond-resolving scanning probe microscopy, we show the breaking of one of the C-C σ-bonds of a biphenylene derivative, followed by insertion of Cu from the substrate. Chemical characterization of the generated species was complemented by X-ray photoemission spectroscopy, and their reactivity was explained by density functional theory calculations. To gain further insight into this unique reactivity on other coinage metals, the reaction pathway on Ag(111) was also investigated and the results were compared with those on Cu(111). This study offers new synthetic routes that may be employed in the in situ generation of activated species for the on-surface synthesis of novel C-based nanostructures.

The emerging chemistry of the aluminyl anion

The chemistry of low valent p-block metal complexes continues to elicit interest in the research community, demonstrating reactivity that replicates and in some cases exceeds that of their more widely studied d-block metal counterparts. The introduction of the first aluminyl anion, a complex containing a formally anionic Al(I) centre charge balanced by an alkali metal (AM) cation, has established a platform for a new area of chemical research. The chemistry displayed by aluminyl compounds is expanding rapidly, with examples of reactivity towards a diverse range of small molecules and functional groups now reported in the literature. Herein we present an account of the structure and reactivity of the growing family of aluminyl compounds. In this context we examine the structural relationships between the aluminyl anion and the AM cations, which now include examples of AM = Li, Na, K, Rb and Cs. We report on the ability of these compounds to engage in bond-breaking and bond-forming reactions, which is leading towards their application as useful reagents in chemical synthesis. Furthermore we discuss the chemistry of bimetallic complexes containing direct Al-M bonds (M = Li, Na, K, Mg, Ca, Cu, Ag, Au, Zn) and compounds with Al-E multiple bonds (E = NR, CR₂, O, S, Se, Te), where both classes of compound are derived directly from aluminyl anions.

An Aluminium Imide as a Transfer Agent for the [NR]2- Function via Metathesis Chemistry

The reactions of a terminal aluminium imide with a range of oxygen-containing substrates have been probed with a view to developing its use as a novel main group transfer agent for the [NR]^2- fragment. We demonstrate transfer of the imide moiety to [N₂ ], [CO] and [Ph(H)C] units driven thermodynamically by Al-O bond formation. N₂ O reacts rapidly to generate the organoazide DippN₃ (Dipp=2,6-ⁱ Pr₂ C₆ H₃ ), while CO₂ (under dilute reaction conditions) yields the corresponding isocyanate, DippNCO. Mechanistic studies, using both experimental and quantum chemical techniques, identify a carbamate complex K₂ [(NON)Al-{κ² -(N,O)-N(Dipp)CO₂ }]₂ (formed via [2+2] cycloaddition) as an intermediate in the formation of DippNCO, and also in an alternative reaction leading to the generation of the amino-dicarboxylate complex K₂ [(NON)Al{κ² -(O,O')-(O₂ C)₂ N-(Dipp)}] (via the take-up of a second equivalent of CO₂ ). In the case of benzaldehyde, a similar [2+2] cycloaddition process generates the metallacyclic hemi-aminal complex, K_n [(NON)Al{κ² -(N,O)-(N(Dipp)C(Ph)(H)O}]_n . Extrusion of the imine, PhC(H)NDipp, via cyclo-reversion is disfavoured thermally, due to the high energy of the putative aluminium oxide co-product, K₂ [(NON)Al(O)]₂ . However, addition of CO₂ allows the imine to be released, driven by the formation of the thermodynamically more stable aluminium carbonate co-product, K₂ [(NON)Al(κ² -(O,O')-CO₃ )]₂ .

Cationic dialanes with fluxional π-bridged cyclopentadienyl ligands

Unique π-cyclopentadienyl bridged dialanes are synthesized as complex salts with aluminate anions by comproportionation of aluminocenium cations [Al^III(Cp)(Cp*)]⁺/[Al^IIICp₂]⁺ with [(Al^ICp*)₄]. Very short Al-Al bond lengths occur in positively charged Al₂⁴⁺ fragments. Intriguingly, the prepared asymmetric dialane shows a unique fluxional coordination of the cyclopentadienyl ligands.

Al-Sc Bonded Complexes: Synthesis, Structure, and Reaction with Benzene in the Presence of Alkyl Halide

An alumanyl anion possessing N,N'-bis(2,6-diisopropylphenyl)-1,3-propanediamine ligand was synthesized and characterized. Transmetalation of this Al anion with diaminoscandium chloride precursors afforded the corresponding Al-Sc complexes possessing an unprecedented Al-Sc bond. The Al-Sc[N(SiMe₃)₂] complex underwent intramolecular C-H cleavage to form a bridged dinuclear complex with μ-hydrido and μ-methylene ligands. The Al-Sc(NⁱPr₂)₂ complex reacted with benzene in the presence of alkyl bromide to furnish a 1,4-dialuminated cyclohexadiene product with a concomitant formation of the alkyl-alkyl coupled product. Although the latter product seems to form through the radical mechanism, DFT calculations revealed an ionic mechanism involving bimetallic reaction pathways to react with alkyl bromide and benzene, which provides new insight into the chemistry of metal-metal bonded compounds.

Synthesis, Characterization, and Structural Analysis of [Al(NONDipp)(H)(SiH2Ph)] ( = Li, Na, K, Rb, Cs) Compounds, Made Via Oxidative Addition of Phenylsilane to Alkali Metal Aluminyls

We report the oxidative addition of phenylsilane to the complete series of alkali metal (AM) aluminyls [AM{Al(NON^Dipp)}]₂ (AM = Li, Na, K, Rb, and Cs). Crystalline products (1-AM) have been isolated as ether or THF adducts, [AM(L)_n][Al(NON^Dipp)(H)(SiH₂Ph)] (AM = Li, Na, K, Rb, L = Et₂O, n = 1; AM = Cs, L = THF, n = 2). Further to this series, the novel rubidium rubidiate, [{Rb(THF)₄}₂(Rb{Al(NON^Dipp)(H)(SiH₂Ph)}₂)]⁺ [Rb{Al(NON^Dipp)(H)(SiH₂Ph)}₂]^-, was isolated during an attempted recrystallization of Rb[Al(NON^Dipp)(H)(SiH₂Ph)] from a hexane/THF mixture. Structural and spectroscopic characterizations of the series 1-AM confirm the presence of μ-hydrides that bridge the aluminum and alkali metals (AM), with multiple stabilizing AM···π(arene) interactions to either the Dipp- or Ph-substituents. These products form a complete series of soluble, alkali metal (hydrido) aluminates that present a platform for further reactivity studies.

Systematic Electronic and Structural Studies of 9-Carbene-9-Borafluorene Monoanions and Transformations into Luminescent Boron Spirocycles

The impact of the exact spatial arrangement of the alkali metal on the electronic properties of 9-carbene-9-borafluorene monoanions is assessed, and a series of [K][9-CAAC-9-borafluorene] complexes (1-4) have been isolated (CAAC = cyclic(alkyl)(amino) carbene, (2,6-diisopropylphenyl)-4,4-diethyl-2,2-dimethyl-pyrrolidin-5-ylidene). Compound 1, which contains [B]-K(THF)₃ interactions, is compared to charge-separated 2-4, which were prepared by capturing the potassium cations with 18-crown-6, 2.2.2-cryptand, or 1,10-phenanthroline. Notably, the ¹¹B NMR spectra of charge-separated borafluorene monoanions 2-4 show distinct low-field signatures compared to 1. Theoretical calculations indicate that charge separation may be exploited to influence the nucleophilic and electron transfer properties of 9-carbene-9-borafluorene monoanions. When [K(2.2.2-cryptand)][9-CAAC-9-borafluorene] (3) is reacted with 9,10-phenanthrenequinone and 1,10-phenanthroline-5,6-dione, the carbene ligand is displaced, and new air-stable R₂BO₂ spirocycles are formed (5 and 6, respectively). Remarkably, compounds 5 and 6 display fluorescence under UV light in both the solid and solution phases with quantum yields of up to 20%. In addition, a drastic red-shift in the emission color is observed in 6 because of the presence of the nitrogen atoms on the phenanthroline moiety. Mechanistic insights into the formation of these spirocycles are also described based on density functional theory calculations.

Reductive Al-B σ-Bond Formation in Alumaboranes: Facile Scission of Polar Multiple Bonds

We present facile access to an alumaborane species with electron precise Al-B σ-bond. The reductive rearrangement of 1-(AlI₂ ), 8-(BMes₂ ) naphthalene (Mes=2,4,6-Me₃ C₆ H₂ ) affords the alumaborane species cyclo-(1,8-C₁₀ H₆ )-[1-Al(Mes)(OEt₂ )-8-B(Mes)] with a covalent Al-B σ-bond. The Al-B σ-bond performs the reductive scission of multiple bonds: S=C(NiPrCMe)₂ affords the naphthalene bridged motif B-S-Al(NHC), NHC=N-heterocyclic carbene, while O=CPh₂ is deoxygenated to afford an B-O-Al bridged species with incorporation of the remaining ≡CPh₂ fragment into the naphthalene scaffold. The reaction with isonitrile Xyl-N≡C (Xyl=2,6-Me₂ C₆ H₄ ) proceeds via a proposed (amino boryl) carbene species; which adds a second equivalent of isonitrile to ultimately form the Al-N-B bridged species cyclo-(1,8-C₁₀ H₆ )-[1-Al(Mes)-N(Xyl)-8-B{C(Mes)=C-N-Xyl}] with complete scission of the C≡N triple bond. The latter reaction is supported with isolated intermediates and by DFT calculations.

Unravelling the Potential of Ylides in Stabilizing Low-Valent Group 13 Compounds: Theoretical Predictions of Stable, Five-Membered Group 13 (Aluminum and Gallium) Carbenoids Capable of Small-Molecule Activation

Computational investigations provide evidence toward the remarkable ability of strongly electron-donating ylidic functionalities in stabilizing singlet group 13 carbenoids with promising ligand properties. All of the proposed carbenoids are found to be considerably nucleophilic and possess significant singlet-triplet energy separation values. The calculated activation barriers and reaction free energies obtained for the cleavage of different enthalpically strong bonds by these carbenoids are found to be either comparable to or lower than those of the experimentally evaluated aluminum and gallium carbenoids, thereby indicating their potential in small-molecule activation.

Synthesis of a low-valent Al4+ cluster cation salt

Low-valent aluminium compounds are very reactive main-group species and have therefore been widely investigated. Since the isolation of a stable molecular Al(I) compound in 1991, [(AlCp*)₄] (Cp* = [C₅Me₅]^-), a variety of highly reactive neutral or anionic low-valent aluminium complexes have been developed. By contrast, their cationic counterparts have remained difficult to access. Here, we report the synthesis of [Al(AlCp*)₃]⁺[Al(OR^F)₄]^- (R^F = C(CF₃)₃) through a simple metathesis reaction between [(AlCp*)₄] and Li[Al(OR^F)₄]. Unexpectedly, the [Al(AlCp*)₃]⁺ salt forms a dimer in the solid state and concentrated solutions. Addition of Lewis bases results in monomerization and coordination to the unique formal Al⁺ atom, giving [(L)_xAl(AlCp*)₃]⁺ salts where L is hexaphenylcarbodiphosphorane (x = 1), tetramethylethylenediamine (x = 1) or 4-dimethylaminopyridine (x = 3). The Al⁺-Al_Cp* bonds in the resulting [(L)_xAl(AlCp*)₃]⁺ cluster cations can be finely tuned between very strong (with no ligand L) to very weak and approaching isolated [Al(L)₃]⁺ ions (when L is dimethylaminopyridine).

Alkali metal influences in aluminyl complexes

The previously reported potassium aluminyl complex [(BDI-H)Al^-K⁺]₂ was converted in Li⁺ or Na⁺ salts by a salt metathesis reaction with Li(BPh₄) or Na(BPh₄), respectively; BDI-H = dianionic [(DIPP)N-C(Me)C(H)-C(CH₂)-N(DIPP)^2-] and DIPP = 2,6-diisopropylphenyl. The Rb and Cs aluminyl complexes were obtained by reaction of (BDI)Al with RbC₈ or CsC₈; BDI = HC[C(Me)N(DIPP)]₂. Crystal structures of two monomers, (BDI-H)Al^-Li⁺·(Et₂O)₂ and (BDI-H)Al^-Na⁺·(Et₂O)(TMEDA), and four dimers [(BDI-H)Al^-M⁺]₂ (M = Li, Na, Rb, Cs) are discussed. Lewis base-free dimers [(BDI-H)Al^-M⁺]₂ crystallize either as slipped dimers (Li⁺, Na⁺) in which each Al center features only one Al-M contact or as a symmetric dimer (K⁺, Rb⁺, Cs⁺) in which the cation bridges both Al centers. The dimer with the largest cation (Cs⁺) shows Cs⋯CH₂C interactions between dimers, resulting in a coordination polymer. AIM and charge analysis reveal highly ionic Al-M bonds with strong polarization of the Al lone-pair towards the smaller cation Li⁺ and Na⁺. The Al-M bonds become weaker from Li to Cs. Calculated dimerization energies suggest that in apolar solvents only complexes with the heavier metals Rb and Cs may be in a monomer-dimer equilibrium. This is confirmed by DOSY measurements in benzene. Dimeric aluminyl complexes with heavier alkali metals (K-Cs) react with benzene to give a double C-H activation in para-positions.

Coordination and Homologation of CO at Al(I): Mechanism and Chain Growth, Branching, Isomerization, and Reduction

Homologation of carbon monoxide is central to the heterogeneous Fischer–Tropsch process for the production of hydrocarbon fuels. C–C bond formation has been modeled by homogeneous systems, with [C_nO_n]^2– fragments (n = 2–6) formed by two-electron reduction being commonly encountered. Here, we show that four- or six-electron reduction of CO can be accomplished by the use of anionic aluminum(I) (“aluminyl”) compounds to give both topologically linear and branched C₄/C₆ chains. We show that the mechanism for homologation relies on the highly electron-rich nature of the aluminyl reagent and on an unusual mode of interaction of the CO molecule, which behaves primarily as a Z-type ligand in initial adduct formation. The formation of [C₆O₆]^4– from [C₄O₄]^4– shows for the first time a solution-phase CO homologation process that brings about chain branching via complete C–O bond cleavage, while a comparison of the linear [C₄O₄]^4– system with the [C₄O₄]^6– congener formed under more reducing conditions models the net conversion of C–O bonds to C–C bonds in the presence of additional reductants.

Diverse reactivity of an Al(I)-centred anion towards ketones

The reactivity of a seven-membered cyclic potassium diamidoalumanyl toward a variety of ketone small molecules has been assessed. Whilst acetophenone generates an aluminium pinacolate derivative, reductive C-C coupling is induced between the ketyl and ortho-carbon centres of two equivalents of benzophenone. In contrast, whereas oxidative addition of an enolisable proton is observed with 2,4-dimethyl-3-pentanone, 2,2,4,4-tetramethyl-3-pentanone undergoes an unprecedented hydroalumination process, where the reducing hydride may be traced to intramolecular oxidative addition of a (sp³)C-H bond.

Reactivity of Unsupported Transition Metal-Aluminyl Complexes: A Nucleophilic TM-Al Bond

Despite the long history of research in transition metal (TM) complexes, the study of TM-aluminyl complexes is still in its early stage of development. It is expected that the presence of an electropositive Al donor atom would open up new possibilities in TM complex reactivity, and indeed TM-aluminyl has shown an early sign of success in small-molecule activation. On the other hand, the existing reports on TM-aluminyl reactivity are often explained to readers with different understanding on individual cases, and a general picture of TM-aluminyl reactivity is still not available. In this work, we have attempted to provide a systematic picture to explain some early explorations in this field, specifically a series of recently reported heteroallene insertion reactions involving unsupported TM-aluminyl complexes. Through density functional theory calculations of a number of TM-aluminyl complexes, covering both Au and Cu centers, we found that their reactivity against heteroallenes (including CO₂ and carbodiimides) is mostly based on the strong nucleophilicity of the TM-Al σ-bond.

Unraveling differences in aluminyl and carbene coordination chemistry: bonding in gold complexes and reactivity with carbon dioxide

The electronic properties of aluminyl anions have been reported to be strictly related to those of carbenes, which are well-known to be easily tunable via selected structural modifications imposed on their backbone. Since peculiar reactivity of gold-aluminyl complexes towards carbon dioxide has been reported, leading to insertion of CO2 into the Au-Al bond, in this work the electronic structure and reactivity of Au-Al complexes with different aluminyl scaffolds have been systematically studied and compared to carbene analogues. The analyses reveal that, instead, aluminyls and carbenes display a very different behavior when bound to gold, with the aluminyls forming an electron-sharing and weakly polarized Au-Al bond, which turns out to be poorly modulated by structural modifications of the ligand. The reactivity of gold-aluminyl complexes towards CO2 shows, both qualitatively and quantitatively, similar reaction mechanisms, reflecting the scarce tunability of their electronic structure and bond nature. This work provides further insights and perspectives on the properties of the aluminyl anions and their behavior as coordination ligands.

Potassium Aluminyl Promoted Carbonylation of Ethene

The potassium aluminyl [K{Al(NON^Dipp)}]₂ ([NON^Dipp]²⁻=[O{SiMe₂NDipp}₂]²⁻, Dipp=2,6‐iPr₂C₆H₃) activates ethene towards carbonylation with CO under mild conditions. An isolated bis‐aluminacyclopropane compound reacted with CO via carbonylation of an Al−C bond, followed by an intramolecular hydrogen shift to form K₂[Al(NON^Dipp)(μ‐CH₂CH=CO‐1κ²C^1,3‐2κO)Al(NON^Dipp)Et]. Restricting the chemistry to a mono‐aluminium system allowed isolation of [Al(NON^Dipp)(CH₂CH₂CO‐κ²C^1,3)]⁻, which undergoes thermal isomerisation to form the [Al(NON^Dipp)(CH₂CH=CHO‐κ²C,O)]⁻ anion. DFT calculations highlight the stabilising influence of incorporated benzene at multiple steps in the reaction pathways.

On the reactivity of Al-group 11 (Cu, Ag, Au) bonds

Reactions of the seven-membered heterocyclic potassium diamidoalumanyl, [K{Al(SiN^Dipp)}]₂ (SiN^Dipp = {CH₂SiMe₂NDipp}₂; Dipp = 2,6-di-isopropylphenyl), with a variety of Cu(I), Ag(I) and Au(I) chloride N-heterocyclic carbene (NHC) adducts are described. The resultant group 11-Al bonded derivatives have been characterised in solution by NMR spectroscopy and, in the case of [{SiN^Dipp}Al-Au(NHC^iPr)] (NHC^iPr = N,N'-di-isopropyl-4,5-dimethyl-2-ylidene), by single crystal X-ray diffraction. Although similar reactions of LAgCl and LAuCl, where L is a more basic cyclic alkyl amino carbene (CAAC), generally resulted in reduction of the group 11 cations to the base metals, X-ray analysis of [(^CyCAAC)AgAl(SiN^Dipp)] (^CyCAAC = 2-[2,6-bis(1-methylethyl)phenyl]-3,3-dimethyl-2-azaspiro[4.5]dec-1-ylidene) provides the first solid-state authentication of an Ag-Al σ bond. The reactivity of the NHC-supported Cu, Ag and Au alumanyl derivatives was assayed with the isoelectronic unsaturated small molecules, N,N'-di-isopropylcarbodiimide and CO₂. While these reactions generally provided products consistent with nucleophilic attack of the group 11 atom at the electrophilic heteroallene carbon centre, treatment of the NHC-supported copper and silver alumanyls with N,N'-di-isopropylcarbodiimide yielded less symmetric Cu-C and Ag-C-bonded isomers. In contrast to the previously described copper and silver alumanyl derivatives, [(NON)Al(O₂C)M(Pt-Bu₃)] (M = Cu or Ag; NON = 4,5-bis(2,6-di-isopropylanilido)-2,7-di-tert-butyl-9,9-dimethylxanthene), which were prone to facile CO extrusion and formation of carbonate derivatives, the NHC-supported dioxocarbene species, [(NHC^iPr)M(CO₂)Al(SiN^Dipp)] (M = Cu, Ag, Au), are all stable at room and moderately elevated temperatures. The stabilising role of the NHC co-ligand was, thus, assessed by preparation of the t-Bu₃P adducted copper-alumanyl, [(t-Bu₃P)CuAl(SiN^Dipp)]. Treatment of this latter compound, which was also structurally characterised by X-ray analysis, with both N,N'-di-isopropylcarbodiimide and CO₂ again provided smooth heteroallene insertion and formation of the relevant Cu-C-bonded products. Although both compounds were quite stable at room temperature, heating of [(t-Bu₃P)Cu(CO₂)Al(SiN^Dipp)] at 60 °C induced elimination of CO and formation of the analogous carbonate, [(t-Bu₃P)Cu(OCO₂)Al(SiN^Dipp)], which was identified by ¹³C and ³¹P NMR spectroscopy. Reflective of the more reliable nucleophilic behaviour of the gold centres in these group 11 alumanyls, computational (QTAIM and NBO) analysis highlighted a lower level of covalency of the Al-Au linkage in comparison to the analogous Al-Cu and Al-Ag interactions. Although substitution of the co-ligand significantly perturbs the charge distribution across the Cu-Al bond of [LCuAl(SiN^Dipp)] (L = NHC^iPr or t-Bu₃P), only a negligible difference is observed between the phosphine-coordinated copper systems derived from either the [SiN^Dipp]- or (NON)-based alumanyl ligands. Computational mapping of the reaction profiles arising from treatment of the various group 11 alumanyls with N,N'-di-isopropylcarbodiimide indicates that the observed formation of the Cu-N and Ag-N bound isomers do not provide the thermodynamic reaction outcome. In contrast, examination of the CO₂-derived reactions, and their potential toward CO extrusion and subsequent carbonate formation, implies that the identity of the co-ligand exerts a greater influence on this aspect of reactivity than the architecture of the diamidoalumanyl anion.

A Tetraorganyl-Alumaborane with An Al-B σ-Bond and Two Adjacent Lewis-Acidic Centers

A tetraorganyl-alumaborane (3) that contains an Al-B bond and twisted Al and B planes was synthesized and structurally characterized. UV-vis absorption spectroscopy, electrochemical measurement, and DFT calculations were employed to reveal the electronic properties of 3. The reactivity of 3 toward DMSO and CO was studied to demonstrate its deoxygenating abilities. On the basis of the results of the DFT calculations, a detailed reaction mechanism was developed, which highlighted the important role of the distinct Lewis acidity of the group-13 elements Al and B in 3.

Rubidium and caesium aluminyls: synthesis, structures and reactivity in C-H bond activation of benzene

Expanding knowledge of low valent aluminium chemistry, rubidium and caesium aluminyls are reported to complete the group 1 (Li-Cs) set of metal aluminyls. Both compounds crystallize as a contacted dimeric pair supported by M⋯π(arene) interactions with a pronounced twist between aluminyl units. Density functional theory calculations show symmetrical bonding between the M and Al atoms, with an Al centred lone-pair donating into vacant Rb and Cs orbitals. Interestingly, despite their structural similarity the Cs aluminyl enables C-H bond activation of benzene, but not the Rb aluminyl reflecting the importance of the alkali metal in these heterobimetallic systems.

Stepwise reduction of a base-stabilised ferrocenyl aluminium(iii) dihalide for the synthesis of structurally-diverse dialane species

A bulky ferrocenyl-based NHC-stabilised aluminium(iii) dihalide was reduced in different solvents, leading to vastly different outcomes, including formation of a rare example of a dialane and a novel dialuminyl analogue of the Birch reduction.

A Free Aluminylene with Diverse σ-Donating and Doubly σ/π-Accepting Ligand Features for Transition Metals*

We report herein the synthesis, characterization, and coordination chemistry of a free N-aluminylene, namely a carbazolylaluminylene 2 b. This species is prepared via a reduction reaction of the corresponding carbazolyl aluminium diiodide. The coordination behavior of 2 b towards transition metal centers (W, Cr) is shown to afford a series of novel aluminylene complexes 3-6 with diverse coordination modes. We demonstrate that the tri-active ambiphilic Al center in 2 b can behave as: 1. a σ-donating and doubly π-accepting ligand; 2. a σ-donating, σ-accepting and π-accepting ligand; and 3. a σ-donating and doubly σ-accepting ligand. Additionally, we show ligand exchange at the aluminylene center providing access to the modulation of electronic properties of transition metals without changing the coordinated atoms. Investigations of 2 b with IDippCuCl (IDipp=1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) show an unprecedented aluminylene-alumanyl transformation leading to a rare terminal Cu-alumanyl complex 8. The electronic structures of such complexes and the mechanism of the aluminylene-alumanyl transformation are investigated through density functional theory (DFT) calculations.

Generation of a π-Bonded Isomer of [P4 ]4- by Aluminyl Reduction of White Phosphorus and its Ammonolysis to PH3

By employing the highly reducing aluminyl complex [K{(NON)Al}]₂ (NON=4,5-bis(2,6-diisopropylanilido)-2,7-di-tert-butyl-9,9-dimethylxanthene), we demonstrate the controlled formation of P₄ ^2- and P₄ ^4- complexes from white phosphorus, and chemically reversible inter-conversion between them. The tetra-anion features a unique planar π-bonded structure, with the incorporation of the K⁺ cations implicit in the use of the anionic nucleophile offering additional stabilization of the unsaturated isomer of the P₄ ^4- fragment. This complex is extremely reactive, acting as a source of P^3- : exposure to ammonia leads to the release of phosphine (PH₃ ) under mild conditions (room temperature and pressure), which contrast with those necessitated for the direct combination of P₄ and NH₃ (>5 kbar and >250 °C).