Molecular Mechanism for the Interactions of Hofmeister Cations with Macromolecules in Aqueous Solution

Thermal Warning and Shut-down of Lithium Metal Batteries Based on Thermoresponsive Electrolytes

The thermal runaway issue represents a long-standing obstacle that retards large-scale applications of lithium metal batteries. Various approaches to inhibit thermal runaway suffer from some intrinsic drawbacks, either being irreversible or delayed thermal protection. Herein, this work has explored thermo-responsive lower critical solution temperature (LCST) ionic liquid-based electrolytes, which provides reversible overheating protection for batteries with warning and shut-down stages, well corresponding to an initial stage of thermal runaway process. The batteries could function stably below 70 °C as a working mode, while demonstrating a warning mode above 80 °C with a noticeable reduction in specific capacitance to delay temperature increase of batteries. In terms of 110 °C as a critically dangerous temperature, a shut-down mode is designed to minimize the thermal energy releasing as the batteries are barely chargeable and dischargeable. Dynamically growing polymeric particles above LCST contributed to such an intelligent and mild control on specific capacitance. Larger size will occupy larger surfaces of electrodes and close more pores of separators, enabling a gradual suppressing of Li+ transfer and reactions. The present work demonstrated a scientific design of thermoresponsive LCST electrolytes with a superiorly precise and intelligent control of electrochemical performances to achieve self-adapted overheating protections.

Greasy Cations Bind to Neutral Macromolecules in Aqueous Solution

Ions influence the solution properties of macromolecules. Although much is known about anions, cationic effects are considered mostly in terms of weak interactions or exclusion from neutral interfaces. Herein, we have systematically studied the effect of quaternary tetraalkylammonium cations (NH4+, NMe4+, NEt4+, NPr4+, NBu4+) on the phase transition of poly(N-isopropylacrylamide) (PNIPAM) in aqueous solution. Solubility measurements were coupled to 1H NMR and ATR-FTIR spectroscopic measurements. The solubility and NMR measurements revealed a direct binding between the greasiest cations and the isopropyl group of the macromolecule, evidenced from the nonlinear, Langmuir-type chemical shift response only at the isopropyl NMR signals with increasing salt concentrations. The ATR-FTIR measurements focusing on the amide oxygen showed that it is not the main direct-binding site. Additionally, the salting-out effects of the greasier cations correlate with their hydration entropies. These results demonstrate that the most weakly hydrated cations can bind to macromolecules as strongly as the weakly hydrated Hofmeister anions.

Ecofriendly Controlled-Release Insecticide Carrier: pH-/Temperature-Responsive Rosin-Derived Hydrogels for Avermectin Delivery against Mythimna separata (Walker)

The exploration of environmentally friendly, less toxic, sustained-release insecticide is increasing with the growing demand for food to meet the requirements of the expanding population. As a sustained-release carrier, the unique, environmentally friendly intelligent responsive hydrogel system is an important factor in improving the efficiency of insecticide utilization and accurate release. In this study, we developed a facile approach for incorporating the natural compound rosin (dehydroabietic acid, DA) and zinc ions (Zn2+) into a poly(N-isopropylacrylamide) (PNIPAM) hydrogel network to construct a controlled-release hydrogel carrier (DA-PNIPAM-Zn2+). Then, the model insecticide avermectin (AVM) was encapsulated in the carrier at a drug loading rate of 36.32% to form AVM@DA-PNIPAM-Zn2+. Surprisingly, the smart controlled carrier exhibited environmental responsiveness, strongly enhanced mechanical properties, self-healing ability, hydrophobicity, and photostability to ensure a balance between environmental friendliness and the precision of the drug release. The release experiments showed that the carboxyl and amide groups in the polymer chains alter the intermolecular forces within the hydrogel meshes and ingredient diffusion by changing temperatures (25 and 40 °C) and pH values (5.8, 7.4, and 8.5), leading to different release behaviors. The insecticidal activity of the AVM@DA-PNIPAM-Zn2+ against oriental armyworms was good, with an effective minimum toxicity toward aquatic animals. Therefore, AVM@DA-PNIPAM-Zn2+ is an effective drug delivery system against oriental armyworms. We anticipate that this ecofriendly, sustainable, smart-response carrier may broaden the utilization rosin and its possible applications in the agricultural sector.

Ionic Effect on the Microenvironment of Biomolecular Condensates

Biomolecules such as proteins and RNA could organize to form condensates with distinct microenvironments through liquid-liquid phase separation (LLPS). Recent works have demonstrated that the microenvironment of biomolecular condensates plays a crucial role in mediating biological activities, such as the partition of biomolecules, and the subphase organization of the multiphasic condensates. Ions could influence the phase transition point of LLPS, following the Hofmeister series. However, the ion-specific effect on the microenvironment of biomolecular condensates remains unknown. In this study, we utilized fluorescence lifetime imaging microscopy (FLIM), fluorescence recovery after photobleaching (FRAP), and microrheology techniques to investigate the ion effect on the microenvironment of condensates. We found that ions significantly affect the microenvironment of biomolecular condensates: salting-in ions increase micropolarity and reduce the microviscosity of the condensate, while salting-out ions induce opposing effects. Furthermore, we manipulate the miscibility and multilayering behavior of condensates through ion-specific effects. In summary, our work provides the first quantitative survey of the microenvironment of protein condensates in the presence of ions from the Hofmeister series, demonstrating how ions impact micropolarity, microviscosity, and viscoelasticity of condensates. Our results bear implications on how membrane-less organelles would exhibit varying microenvironments in the presence of continuously changing cellular conditions.

Protein structure-function continuum model: Emerging nexuses between specificity, evolution, and structure

The rationale for replacing the old binary of structure-function with the trinity of structure, disorder, and function has gained considerable ground in recent years. A continuum model based on the expanded form of the existing paradigm can now subsume importance of both conformational flexibility and intrinsic disorder in protein function. The disorder is actually critical for understanding the protein-protein interactions in many regulatory processes, formation of membrane-less organelles, and our revised notions of specificity as amply illustrated by moonlighting proteins. While its importance in formation of amyloids and function of prions is often discussed, the roles of intrinsic disorder in infectious diseases and protein function under extreme conditions are also becoming clear. This review is an attempt to discuss how our current understanding of protein function, specificity, and evolution fit better with the continuum model. This integration of structure and disorder under a single model may bring greater clarity in our continuing quest for understanding proteins and molecular mechanisms of their functionality.

Elucidating the influence of electrostatic force on the re-arrangement of H-bonds of protein polymers in the presence of salts

Polyampholytes/proteins have an intriguing network of hydrogen bonds (H-bonds), especially their secondary structure, which plays a crucial role in determining the conformational stability of the polymer. The changes in protein secondary structure in the protein-salt system have been extensively deciphered by researchers, yet their pathways for breakage and recreation are unknown. Understanding the mechanism of protein conformational changes towards their biological activities, like protein folding, remains one of the main challenges and requires multiscale analysis of this strongly correlated system. Herein, salts have been used to reveal the re-arrangement behavior in the H-bond network of proteins under the influence of electrostatic interactions, as the strength of electrostatic forces is much stronger than that of H-bonds. At lower salt concentrations, there are negligible changes in the secondary structures as the electrostatic forces induced by the salt ions are less. Later, the existing H-bonds break and reconstruct new H-bonds at higher salt concentrations due to the influence of the stronger electrostatic interaction induced by the large number of salt ions. Molecular dynamics (MD) simulations and FTIR studies have been used rigorously to decipher the reason behind the re-arrangement of the H-bonds within gelatin (protein). The re-arrangement in the H-bond has also been observed with time from simulations and experiments. Thus, this study could provide a fresh perspective on the conformational changes of polyampholytes/proteins and will also influence the studies of protein folding-unfolding interaction in the presence of salt ions.

Stimuli-triggered multilayer films in response to temperature and ionic strength changes for controlled favipiravir drug release

The block copolymer micelles and natural biopolymers were utilized to form layer-by-layer (LbL) films via electrostatic interaction, which were able to effectively load and controllably release favipiravir, a potential drug for the treatment of coronavirus epidemic. The LbL films demonstrated reversible swelling/shrinking behavior along with the manipulation of temperature, which could also maintain the integrity in the structure and the morphology. Due to dehydration of environmentally responsive building blocks, the drug release rate from the films was decelerated by elevating environmental temperature and ionic strength. In addition, the pulsed release of favipiravir was observed from the multilayer films under the trigger of temperature, which ensured the precise control in the content of the therapeutic reagents at a desired time point. The nanoparticle-based LbL films could be used for on-demandin vitrorelease of chemotherapeutic reagents.

Spontaneous Appearance of Triiodide Covering the Topmost Layer of the Iodide Solution Interface Without Photo-Oxidation

Ions containing iodine atoms at the vapor-aqueous solution interfaces critically affect aerosol growth and atmospheric chemistry due to their complex chemical nature and multivalency. While the surface propensity of iodide ions has been intensely discussed in the context of the Hofmeister series, the stability of various ions containing iodine atoms at the vapor-water interface has been debated. Here, we combine surface-specific sum-frequency generation (SFG) vibrational spectroscopy with ab initio molecular dynamics simulations to examine the extent to which iodide ions cover the aqueous surface. The SFG probe of the free O-D stretch mode of heavy water indicates that the free O-D group density decreases drastically at the interface when the bulk NaI concentration exceeds ∼2 M. The decrease in the free O-D group density is attributed to the spontaneous appearance of triiodide that covers the topmost interface rather than to the surface adsorption of iodide. This finding demonstrates that iodide is not surface-active, yet the highly surface-active triiodide is generated spontaneously at the water-air interface, even under dark and oxygen-free conditions. Our study provides an important first step toward clarifying iodine chemistry and pathways for aerosol formation.

Molecular interactions of acids and salts with polyampholytes

The Hofmeister series characterizes the ability of salt anions to precipitate polyampholytes/proteins. However, the variation of protein size in the bulk solution of acids and the effect of salts on the same have not been studied well. In this article, the four acids (CH3COOH, HNO3, H2SO4, and HCl) and their effects on the hydrodynamic radius (RH) of gelatin in the bulk solution are investigated. The effects of Na salt with the same anions are also considered to draw a comparison between the interactions of acids and salts with polyampholytes. It is suggested that the interactions of polyampholytes with acids are different from those of salts. The interaction series of polyampholytes with acids with respect to the RH of the polyampholyte is CH3COO->NO3->Cl->SO42- whereas the interaction series with salts is SO42->CH3COO->Cl->NO3-. These different interactions are due to equilibration between acid dissociation and protonation of polyampholytes. Another important factor contributing to the interactions in weak acids is the fact that undissociated acid hinders the movement of dissociated acid. Experiments and simulations were performed to understand these interactions, and the results were identical in terms of the trend in RH (from the experiments) and the radius of gyration (Rg) (from the simulations). It is concluded that the valence of ions and dissociation affect the interaction in the case of acids. However, the interactions are influenced by the kosmotropic and chaotropic effect, hydration, and mobility in the case of salts.

Free-energy decomposition of salt effects on the solubilities of small molecules and the role of excluded-volume effects

The roles of cations and anions are different in the perturbation on solvation, and thus, the analyses of the separated contributions from cations and anions are useful to establish molecular pictures of ion-specific effects. In this work, we investigate the effects of cations, anions, and water separately in the solvation of n-alcohols and n-alkanes by free-energy decomposition. By utilising energy-representation theory of solvation, we address the contributions arising from the direct solute-solvent interactions and the excluded-volume effects. It is found that the change in solvation of n-alcohols and n-alkanes upon addition of salt depends primarily on the anion species. The direct interaction between the anion and solute is in agreement with the Setschenow coefficient in terms of the ranking of salting-in and salting-out for n-alkanes, which corresponds to the extent of accumulation of the anion on the solute surface. For each of the n-alcohols and n-alkanes examined, the excluded-volume component in the Setschenow coefficient is well correlated to the (total) Setschenow coefficient when the salt effects are concerned. The ranking of the excluded-volume component in the variation of the salt species is parallel to the water contribution, which is correlated further to the change in the water density upon the addition of the salt.

Specific ion effects on lignin adsorption and transport through cellulose confinements

The presence of ions in a solution is anticipated to induce distinct effects on macromolecules. Consequently, the tuning of adsorption and mass transfer of lignin molecules can be achieved by incorporating ions with chaotropic or kosmotropic characteristics. This study examines the adsorption and mass transfer behavior of lignin molecules across model cellulose membranes in presence of ions from the Hofmeister series. Experimental investigations encompassed the use of diffusion cells to quantify lignin's mass transfer through the membranes, and quartz crystal microbalance with dissipation (QCM-D) monitoring was used for adsorption studies. Notably, at high ion concentrations, the mass transport rate of lignin was observed to be lower in the presence of highly hydrated (kosmotropic) sulfate ions, conforming to the Hofmeister series. Intriguingly, this relationship was not apparent at lower ion concentrations. Furthermore, QCM-D experiments indicated that lignin displayed higher adsorption onto the cellulose surface when exposed to less hydrated (chaotropic) nitrate anions. This behavior can be rationalized by considering the system's increased entropy gain, facilitated by the release of adsorbed ions and water molecules from the cellulose surface upon lignin adsorption. This study highlights the complexity of ion-specific effects on mass transfer and adsorption processes and their dependency on ion concentrations.

Surprising Nanomechanical and Conformational Transition of Neutral Polyacrylamide in Monovalent Saline Solutions

Polyacrylamide (PAM) is one of the most important water-soluble polymers that has been extensively applied in water treatment, drug delivery, and flexible electronic devices. The basic properties, e.g., microstructure, nanomechanics, and solubility, are deeply involved in the performance of PAM materials. Current research has paid more attention to the development and expansion of the macroscopic properties of PAM materials, and the study of the mechanism involved with the roles of water and ions on the properties of PAM is insufficient, especially for the behaviors of neutral amide side groups. In this study, single molecule force spectroscopy was combined with molecular dynamic (MD) simulations, atomic force microscope imaging, and dynamic light scattering to investigate the effects of monovalent ions on the nanomechanics and molecular conformations of neutral PAM (NPAM). These results show that the single-molecule elasticity and conformation of NPAM exhibit huge variation in different monovalent salt solutions. NPAM adopts an extended conformation in aqueous solutions of strong hydrated ion (acetate), while transforms into a collapse globule in the existence of weakly hydrated ion (SCN-). It is believed that the competition between intramolecular and intermolecular weak interactions plays a key role to adjust the molecular conformation and elasticity of NPAM. The competition can be largely influenced by the type of monovalent ions through hydration or a chaotropic effect. Methods utilized in this study provide a means to better understand the Hofmeister effect of ions on other macromolecules containing amide groups at the single-molecule level.

Solvation Behavior of Elastin-like Polypeptides in Divalent Metal Salt Solutions

The effects of CaCl2 and MgCl2 on the cloud point temperature of two different elastin-like polypeptides (ELPs) were studied using a combination of cloud point measurements, molecular dynamics simulations, and infrared spectroscopy. Changes in the cloud point for the ELPs in aqueous divalent metal cation solutions were primarily governed by two competing interactions: the cation-amide oxygen electrostatic interaction and the hydration of the cation. In particular, Ca2+ cations can more readily shed their hydration shells and directly contact two amide oxygens by the formation of ion bridges. By contrast, Mg2+ cations were more strongly hydrated and preferred to partition toward the amide oxygens along with their hydration shells. In fact, although hydrophilic ELP V5A2G3 was salted-out at low concentrations of MgCl2, it was salted-in at higher salt concentrations. By contrast, CaCl2 salted the ELP sharply out of solution at higher salt concentrations because of the bridging effect.

Regulating polystyrene glass transition temperature by varying the hydration levels of aromatic ring/Li+ interaction

Polymer properties can be altered via lithium ion doping, whereby adsorbed Li+ binds with H2O within the polymer chain. However, direct spectroscopic evidence of the tightness of Li+/H2O binding in the solid state is limited, and the impact of Li+ on polymer sidechain packing is rarely reported. Here, we investigate a polystyrene/H2O/LiCl system using solid-state NMR, from which we determined a dipolar coupling of 11.4 kHz between adsorbed Li+ and H2O protons. This coupling corroborates a model whereby Li+ interacts with the oxygen atom in H2O via charge affinity, which we believe is the main driving force of Li+ binding. We demonstrated the impact of hydrated Li+ on sidechain packing and dynamics in polystyrene using proton-detected solid-state NMR. Experimental data and density functional theory (DFT) simulations revealed that the addition of Li+ and the increase in the hydration levels of Li+, coupled with aromatic ring binding, change the energy barrier of sidechain packing and dynamics and, consequently, changes the glass transition temperature of polystyrene.

A brief review on the mechanisms and approaches of silk spinning-inspired biofabrication

Silk spinning, observed in spiders and insects, exhibits a remarkable biological source of inspiration for advanced polymer fabrications. Because of the systems design, silk spinning represents a holistic and circular approach to sustainable polymer fabrication, characterized by renewable resources, ambient and aqueous processing conditions, and fully recyclable "wastes." Also, silk spinning results in structures that are characterized by the combination of monolithic proteinaceous composition and mechanical strength, as well as demonstrate tunable degradation profiles and minimal immunogenicity, thus making it a viable alternative to most synthetic polymers for the development of advanced biomedical devices. However, the fundamental mechanisms of silk spinning remain incompletely understood, thus impeding the efforts to harness the advantageous properties of silk spinning. Here, we present a concise and timely review of several essential features of silk spinning, including the molecular designs of silk proteins and the solvent cues along the spinning apparatus. The solvent cues, including salt ions, pH, and water content, are suggested to direct the hierarchical assembly of silk proteins and thus play a central role in silk spinning. We also discuss several hypotheses on the roles of solvent cues to provide a relatively comprehensive analysis and to identify the current knowledge gap. We then review the state-of-the-art bioinspired fabrications with silk proteins, including fiber spinning and additive approaches/three-dimensional (3D) printing. An emphasis throughout the article is placed on the universal characteristics of silk spinning developed through millions of years of individual evolution pathways in spiders and silkworms. This review serves as a stepping stone for future research endeavors, facilitating the in vitro recapitulation of silk spinning and advancing the field of bioinspired polymer fabrication.

Visual demonstration and prediction of the Hofmeister series based on a poly(ionic liquid) photonic array

The Hofmeister effect and associated Hofmeister series (HS) are ubiquitous in physicochemical phenomena and have demonstrated fundamental importance in a myriad of fields ranging from chemistry to biology. Visualization of the HS not only helps to straightforwardly understand the underpinning mechanism, but also enables the prediction of new ion positions in the HS and directs the applications of the Hofmeister effect. Owing to the difficulties of sensing and reporting complete multiple and subtle inter- and intramolecular interactions involved in the Hofmeister effect, facile and accurate visual demonstration and prediction of the HS remain highly challenging. Herein, a poly(ionic liquid) (PIL)-based photonic array containing 6 inverse opal microspheres was rationally constructed to efficiently sense and report the ion effects of the HS. The PILs can not only directly conjugate with HS ions due to their ion-exchange properties, but also provide sufficient noncovalent binding diversity with these ions. Meanwhile, subtle PIL-ion interactions can be sensitively amplified to optical signals owing to their photonic structures. Therefore, synergistic integration of PILs and photonic structures gives rise to accurate visualization of the ion effect of the HS, as demonstrated by correctly ranking 7 common anions. More importantly, assisted by principal component analysis (PCA), the developed PIL photonic array can serve as a general platform to facilely, accurately, and robustly predict the HS positions of an unprecedented amount of important and useful anions and cations. These findings indicate that the PIL photonic platform is very promising for addressing challenges in the visual demonstration and prediction of HS and promoting a molecular-level understanding of the Hoffmeister effect.

Touchable Gustation via a Hoffmeister Gel Iontronic Sensor

A particular sense, touchable gustation, was achieved. We proposed a chemical-mechanical interface strategy with an iontronic sensor device. A conductive hydrogel, amino trimethylene phosphonic acid (ATMP) assisted poly(vinyl alcohol) (PVA), was employed as the dielectric layer of the gel iontronic sensor. The Hofmeister effect of the ATMP-PVA hydrogel was well investigated to establish the quantitative description of the gel elasticity modulus to chemical cosolvents. The mechanical properties of hydrogels can be transduced extensively and reversibly by regulating the aggregation state of polymer chains with hydrated ions or cosolvents. Scanning electron microscopy (SEM) images of ATMP-PVA hydrogel microstructures stained with different soaked cosolvents present different networks. The information on different chemical components will be stored in the ATMP-PVA gels. The flexible gel iontronic sensor with a hierarchical pyramid structure performed high linear sensitivity of 3224.2 kPa^-1 and wide pressure response in the range of 0-100 kPa. The finite element analysis proved the pressure distribution at the gel interface of the gel iontronic sensor and the capacitation-stress response relation. Various cations, anions, amino acids, and saccharides can be discriminated, classified, and quantified with the gel iontronic sensor. The Hofmeister effect regulated chemical-mechanical interface performs the response and conversion of biological/chemical signals into electrical output in real time. The particular function to tactile with gustation percept will contribute promising applications in the human-machine interaction, humanoid robot, clinic treatment, or athletic training optimization.

Ion-specific binding of cations to the carboxylate and of anions to the amide of alanylalanine

Studies of ion-specific effects on oligopeptides have aided our understanding of Hofmeister effects on proteins, yet the use of different model peptides and different experimental sensitivities have led to conflicting conclusions. To resolve these controversies, we study a small model peptide, L-Alanyl-L-alanine (2Ala), carrying all fundamental chemical protein motifs: C-terminus, amide bond, and N-terminus. We elucidate the effect of GdmCl, LiCl, KCl, KI, and KSCN by combining dielectric relaxation, nuclear magnetic resonance (¹H-NMR), and (two-dimensional) infrared spectroscopy. Our dielectric results show that all ions reduce the rotational mobility of 2Ala, yet the magnitude of the reduction is larger for denaturing cations than for anions. The NMR chemical shifts of the amide group are particularly sensitive to denaturing anions, indicative of anion-amide interactions. Infrared experiments reveal that LiCl alters the spectral homogeneity and dynamics of the carboxylate, but not the amide group. Interaction of LiCl with the negatively charged pole of 2Ala, the COO^- group, can explain the marked cationic effect on dipolar rotation, while interaction of anions between the poles, at the amide, only weakly perturbs dipolar dynamics. As such, our results provide a unifying view on ions' preferential interaction sites at 2Ala and help rationalize Hofmeister effects on proteins.

The Lyotropic Nature of Halates: An Experimental Study

Unlike halides, where the kosmotropicity decreases from fluoride to iodide, the kosmotropic nature of halates apparently increases from chlorate to iodate, in spite of the lowering in the static ionic polarizability. In this paper, we present an experimental study that confirms the results of previous simulations. The lyotropic nature of aqueous solutions of sodium halates, i.e., NaClO₃, NaBrO₃, and NaIO₃, is investigated through density, conductivity, viscosity, and refractive index measurements as a function of temperature and salt concentration. From the experimental data, we evaluate the activity coefficients and the salt polarizability and assess the anions' nature in terms of kosmotropicity/chaotropicity. The results clearly indicate that iodate behaves as a kosmotrope, while chlorate is a chaotrope, and bromate shows an intermediate nature. This experimental study confirms that, in the case of halates XO₃^-, the kosmotropic-chaotropic ranking reverses with respect to halides. We also discuss and revisit the role of the anion's polarizability in the interpretation of Hofmeister phenomena.

Spectroscopic Studies of Zwitterionic DDAPS at Planar and Droplet Oil/Water Interfaces

Developing the knowledge on surfactant interfacial phenomena is highly valuable for the advancement of technological, commercial, and industrial products, as these applications often rely on interfacial and colloidal chemistry. Zwitterionic surfactants are a less toxic alternative to standard charged surfactants. With both positively charged quaternary ammonium and negatively charged sulfonate constituents, zwitterionic DDAPS can have diverse interfacial interactions with various coadditives. In this work, we investigate DDAPS adsorption to a planar oil/water interface and its stabilization of oil-in-water nanoemulsions. By studying both interfacial geometries with surface-specific, nonlinear spectroscopy, we gain deeper insights and a molecular perspective into DDAPS's behavior in the presence of various salts and cosurfactants. From an application standpoint, zwitterionic surfactants are often mixed with other chemicals or used in an environment with pre-existing chemicals (e.g., ocean water during oil remediation). Thus, it is important to understand how such coadditives alter DDAPS's behavior and its performance as an emulsifier. Our results show that DDAPS is nearly uninfluenced by coadditives at a planar oil/water interface, but the identical coadditives are crucial for DDAPS to form and stabilize nanoemulsions. Additionally, the surfactant packing properties vary between interfaces as well as coadditives, indicating that certain interactions with the DDAPS headgroup are stronger and play a greater role in tuning DDAPS's interfacial behavior.

The effect of outer-sphere anions on the spectroscopic response of metal-binding chemosensors

Ion pair receptors typically contain two separate binding sites, for the metal and the anion respectively. Here we report a less synthetically demanding approach, whereby we prepared a family of ion pair sensors based on a rhodamine fluorescent scaffold containing a tunable cation binding motif. When exposed to ion pairs, a competition for the metal ion is established between these ligands and anions. Structural and spectroscopic evidence showed that anions bind through weaker secondary interactions in the metal's outer coordination sphere and their presence influences the optical spectroscopic properties of the coordination complex in distinctive ways. The relationship between the binding site's metal affinity and its tunable properties, and the sensors' discriminatory power for anions was explained as a function of the metal ion's binding preferences. These effects were also exploited to discriminate cations and anions concurrently through multivariate data analysis methods.

Swelling of Thermo-Responsive Gels in Aqueous Solutions of Salts: A Predictive Model

The equilibrium degree of swelling of thermo-responsive (TR) gels is strongly affected by the presence of ions in an aqueous solution. This phenomenon plays an important role in (i) the synthesis of multi-stimuli-responsive gels for soft robotics, where extraordinary strength and toughness are reached by soaking of a gel in solutions of multivalent ions, and (ii) the preparation of hybrid gels with interpenetrating networks formed by covalently cross-linked synthetic chains and ionically cross-linked biopolymer chains. A model is developed for equilibrium swelling of a TR gel in aqueous solutions of salts at various temperatures T below and above the critical temperature at which collapse of the gel occurs. An advantage of the model is that it involves a a small (compared with conventional relations) number of material constants and allows the critical temperature to be determined explicitly. Its ability (i) to describe equilibrium swelling diagrams on poly(N-isopropylacrylamide) gels in aqueous solutions of mono- and multivalent salts and (ii) to predict the influence of volume fraction of salt on the critical temperature is confirmed by comparison of observations with results of numerical simulation.

Nanopore Sensing Technique for Studying the Hofmeister Effect

The nanopore sensing technique is an emerging method of detecting single molecules, and extensive research has gone into various fields, including nanopore sequencing and other applications of single-molecule studies. Recently, several researchers have explored the specific ion effects in nanopore channels, enabling a unique understanding of the Hofmeister effect at the single-molecule level. Herein, the recent advances of using nanopore sensing techniques are reviewed to study the Hofmeister effect and the physicochemical mechanism of this process is attempted. The challenges and goals are also discussed for the future in this field.

Understanding specific ion effects and the Hofmeister series

Specific ion effects (SIE), encompassing the Hofmeister Series, have been known for more than 130 years since Hofmeister and Lewith's foundational work. SIEs are ubiquitous and are observed across the medical, biological, chemical and industrial sciences. Nevertheless, no general predictive theory has yet been able to explain ion specificity across these fields; it remains impossible to predict when, how, and to what magnitude, a SIE will be observed. In part, this is due to the complexity of real systems in which ions, counterions, solvents and cosolutes all play varying roles, which give rise to anomalies and reversals in anticipated SIEs. Herein we review the historical explanations for SIE in water and the key ion properties that have been attributed to them. Systems where the Hofmeister series is perturbed or reversed are explored, as is the behaviour of ions at the liquid-vapour interface. We discuss SIEs in mixed electrolytes, nonaqueous solvents, and in highly concentrated electrolyte solutions - exciting frontiers in this field with particular relevance to biological and electrochemical applications. We conclude the perspective by summarising the challenges and opportunities facing this SIE research that highlight potential pathways towards a general predictive theory of SIE.

Ca2+-Chelation-Induced Fabrication of Multistimuli-Responsive Charged Nanogels from Phospholipid-Polymer Conjugates and Use for Drug/Protein Loading

Thermoresponsive phospholipid-poly(N-isopropylacrylamide) (PL-PNIPAM) conjugates were synthesized via reversible addition fragmentation chain transfer polymerization mediated by a phospholipid-modified trithiocarbonate. Temperature triggered the micellization of the PL-PNIPAM conjugate to form phosphate group-decorated micelles in the aqueous solution. Driven by the chelation of phospholipids and Ca²⁺, the PL-PNIPAM conjugate and Ca²⁺ ions formed size-tunable nanoclusters at a temperature beyond the lower critical solution temperature. To fabricate cross-linked nanogels, NIPAM was copolymerized with N-succinimidyl acrylate (NSA) to obtain the PL-P(NIPAM-co-NSA) conjugate bearing pendent cross-linkable functionalities. Subsequently, the size-controllable nanogels containing disulfide linkages were generated at 37 °C by cross-linking the PL-P(NIPAM-co-NSA)/Ca²⁺ nanoclusters with cystamine through modulation of Ca²⁺ concentrations. These negatively charged nanogels demonstrate temperature/pH/reduction triple responsiveness. The nanogels can be efficiently loaded with doxorubicin (DOX) and proteins with various isoelectric points. The DOX-loaded nanogels exhibited a temperature/pH/reduction triple-responsive release profile. The immobilized RNase A, BSA, and GOx retained the protein bioactivity. The release of RNase A-loaded nanogels possesses a temperature-responsive profile. The immobilization of Lys and cytochrome C in nanogels inhibited protein bioactivity. However, the addition of NaCl triggered the recovery of bioactivity. These multistimuli-responsive nanogels can provide a versatile platform applicable in biotechnology and drug/protein delivery.

Hofmeister Effects of Group II Cations as Seen in the Unfolding of Ribonuclease A

This work studies the effects of alkaline-earth cation addition upon the unfolding free energy of a model protein, pancreatic Ribonuclease A (RNase A) by DSC analysis.  RNase A was chosen because it: a) does not specifically bind Mg 2+ , Ca 2+ and Sr 2+ cations and b) maintains its structural integrity throughout a large pH range. We have measured and compared the effects of NaCl, MgCl 2 , CaCl 2 and SrCl 2 addition on the melting point of RNase A.  Our results show that even though the addition of group II cations to aqueous solvent reduces the solubility of nonpolar residues (and enhances the hydrophobic effect), their interactions with the amide moieties are strong enough to "salt-them-in" the solvent, thereby causing an overall reduction in protein stability. We demonstrate that amide-cation interactions are a major contributor to the observed "Hofmeister Effects" of group II cations in protein folding. Our analysis suggests that protein folding "Hofmeister Effects" of group II cations, are mostly the aggregate sum of how cation addition simultaneously salts-out hydrophobic moieties through increasing the cavitation free energy, while promoting the salting-in of amide moieties through contact pair formation.

Length-dependent collective vibrational dynamics in alpha-helices

Functions of protein molecules in nature are closely associated with their well-defined three-dimensional structures and dynamics in body fluid. So far, many efforts have been made to reveal the relation of protein structure, dynamics, and function, but the structural origin of protein dynamics, especially for secondary structures as building blocks of conformation transition, is still ambiguous. Here we theoretically uncover the collective vibrations of elastic poly-alanine α-helices and find vibration patterns that are distinctively different over residue numbers ranging from 20 to 80. Contrary to the decreasing vibration magnitude from ends to the middle region for short helices, the vibration magnitude for long helices takes the minimum at approximately 1/5 of helix length from ends but reaches a peak at the center. Further analysis indicates that major vibrational modes of helical structures strongly depend on their residue numbers, where the twist mode dominates in the vibrations of short helices while the bend mode dominates the long ones analogous to an elastic Euler beam. The helix-coil transition pathway is also affected by the alternation of the first-order mode in helices with different lengths. The dynamic properties of the helical polypeptides are promising to be harnessed for de novo design of protein-based materials and artificial biomolecules in clinical treatments.

Poly(ethylene oxide) Is Positively Charged in Aqueous Solutions

There have been controversies about the binding of cations to poly(ethylene oxide) (PEO) chains in aqueous solutions. In the current study, single molecular evidence of charging PEO chains by cation binding in aqueous solutions is provided. From the adoption of the photon-counting histogram method, it is discovered that the local pH value at the vicinity of the PEO chain is higher than the bulk solution, showing that the PEO chain is positively charged. Such a situation exists with and without the presence of salt (NaCl) in the solution, presumably due to the binding of cations, such as hydronium and sodium ions. Single molecular electrophoresis experiments using fluorescence correlation spectroscopy demonstrate that the PEO chains are weakly charged with a charging extent of ~5%. In comparison to the salt-free condition, the addition of external salt (NaCl) at moderate concentrations further charges the chain. The charging causes the PEO chains to expand and a further increase in the salt concentration causes the chain to shrink, exhibiting a polyelectrolyte-like behavior, demonstrated by the hydrodynamic radii of a single PEO chain. The effect of ion identity is discovered with alkali cations, with the order of the charging capacity of Li+ < Na+ < Cs+ < K+.

Nonadditive ion effects on the coil-globule equilibrium of PNIPAM: A computer simulation study

The combined effect of a weakly hydrated and a strongly hydrated anion on the lower critical solution temperature (LCST) of poly(N-isopropylacrylamide)(PNIPAM) is nonadditive (Bruce et al. J. Am. Chem. Soc....

Assessing the hydrotropic effect in the presence of electrolytes: competition between solute salting-out and salt-induced hydrotrope aggregation

Water solubility enhancement is a long-standing challenge in a multitude of chemistry-related fields. Hydrotropy is a simple and efficient method to improve the solubility of hydrophobic molecules in aqueous media....

Role of Water in the Lyotropic Liquid Crystalline Mesophase of Lithium Salts and Non-ionic Surfactants

The lyotropic liquid crystalline (LLC) mesophase forms upon evaporation of water from aqueous solutions of LiX salts (X is Cl^-, Br^-, NO₃^-, or SCN^-) and a surfactant [C₁₂H₂₅(OCH₂CH₂)₁₀OH, abbreviated as C₁₂E₁₀]. The LiX/C₁₂E₁₀/H₂O aqueous solutions have been monitored (during evaporation of their excess water to obtain stable LLC mesophases) by gravimetric, spectroscopic, and conductivity measurements to elucidate the role of water in these mesophases. The water/salt molar ratio in stable mesophases changes from 1.5 to 8.0, depending on the counteranion of the salt and the ambient humidity of the laboratory. The LiX/C₁₂E₁₀/H₂O LLC mesophases lose water at lower humidity levels and absorb water at higher humidity levels. The LiCl-containing mesophase holds as few as four structural water molecules per LiCl, whereas the LiNO₃ mesophase holds 1.5 waters per salt (least among those assessed). This ratio strongly depends on the atmospheric humidity level; the water/LiX mole ratio increases by 0.08 ± 0.01 H₂O in the LLC mesophases per percent humidity unit. Surprisingly, the LLC mesophases are stable (no salt leaching) in broad humidity (10-85%) and salt/surfactant mole ratio (2-10 LiX/C₁₂E₁₀) ranges. Attenuated total reflectance Fourier transform infrared spectroscopic data show that the water molecules in the mesophase interact with salt species more strongly in the LiCl mesophase and more weakly in the case of the nitrate ion, which is evident by the shift of the O-H stretching band of water. The O-H stretching peak position in the mesophases decreases in the order ν_LiCl > ν_LiBr > ν_LiSCN > ν_LiNO3 and accords well with the H₂O/LiX mole ratio. The conductivity of the LLC mesophase also responds to the amount of water as well as the nature of the counteranion (X^-). The conductivity decreases in the order σ_LiCl > σ_LiBr > σ_LiNO3 > σ_LiSCN at low salt mole ratios and in the order σ_LiBr > σ_LiCl > σ_LiNO3 > σ_LiSCN at higher ratios due to structural changes in the mesophase.

Bridging Structure, Dynamics, and Thermodynamics: An Example Study on Aqueous Potassium Halides

Aqueous salt systems are ubiquitous in all areas of life. The ions in these solutions impose important structural and dynamic perturbations to water. In this study, we employ a combined neutron scattering, nuclear magnetic resonance, and computational modeling approach to deconstruct ion-specific perturbations to water structure and dynamics and shed light on the molecular origins of bulk thermodynamic properties of the solutions. Our approach uses the atomistic scale resolution offered to us by neutron scattering and computational modeling to investigate how the properties of particular short-ranged microenvironments within aqueous systems can be related to bulk properties of the system. We find that by considering only the water molecules in the first hydration shell of the ions that the enthalpy of hydration can be determined. We also quantify the range over which ions perturb water structure by calculating the average enthalpic interaction between a central halide anion and the surrounding water molecules as a function of distance and find that the favorable anion-water enthalpic interactions only extend to ∼4 Å. We further validate this by showing that ions induce structure in their solvating water molecules by examining the distribution of dipole angles in the first hydration shell of the ions but that this perturbation does not extend into the bulk water. We then use these structural findings to justify mathematical models that allow us to examine perturbations to rotational and diffusive dynamics in the first hydration shell around the potassium halide ions from NMR measurements. This shows that as one moves down the halide series from fluorine to iodine, and ionic charge density is therefore reduced, that the enthalpy of hydration becomes less negative. The first hydration shell also becomes less well structured, and rotational and diffusive motions of the hydrating water molecules are increased. This reduction in structure and increase in dynamics are likely the origin of the previously observed increased entropy of hydration as one moves down the halide series. These results also suggest that simple monovalent potassium halide ions induce mostly local perturbations to water structure and dynamics.

The electrostatic origins of specific ion effects: quantifying the Hofmeister series for anions

Life as we know it is dependent upon water, or more specifically salty water. Without dissolved ions, the interactions between biological molecules are insufficiently complex to support life. This complexity is intimately tied to the variation in properties induced by the presence of different ions. These specific ion effects, widely known as Hofmeister effects, have been known for more than 100 years. They are ubiquitous throughout the chemical, biological and physical sciences. The origin of these effects and their relative strengths is still hotly debated. Here we reconsider the origins of specific ion effects through the lens of Coulomb interactions and establish a foundation for anion effects in aqueous and non-aqueous environments. We show that, for anions, the Hofmeister series can be explained and quantified by consideration of site-specific electrostatic interactions. This can simply be approximated by the radial charge density of the anion, which we have calculated for commonly reported ions. This broadly quantifies previously unpredictable specific ion effects, including those known to influence solution properties, virus activities and reaction rates. Furthermore, in non-aqueous solvents, the relative magnitude of the anion series is dependent on the Lewis acidity of the solvent, as measured by the Gutmann Acceptor Number. Analogous SIEs for cations bear limited correlation with their radial charge density, highlighting a fundamental asymmetry in the origins of specific ion effects for anions and cations, due to competing non-Coulombic phenomena.

Hofmeister effects on protein stability are dependent on the nature of the unfolded state

The interpretation of a salt's effect on protein stability traditionally discriminates low concentration regimes (<0.3 M), dominated by electrostatic forces, and high concentration regimes, generally described by ion-specific Hofmeister effects. However, increased theoretical and experimental studies have highlighted observations of the Hofmeister phenomena at concentration ranges as low as 0.001 M. Reasonable quantitative predictions of such observations have been successfully achieved throughout the inclusion of ion dispersion forces in classical electrostatic theories. This molecular description is also on the basis of quantitative estimates obtained resorting to surface/bulk solvent partition models developed for ion-specific Hofmeister effects. However, the latter are limited by the availability of reliable structures representative of the unfolded state. Here, we use myoglobin as a model to explore how ion-dependency on the nature of the unfolded state affects protein stability, combining spectroscopic techniques with molecular dynamic simulations. To this end, the thermal and chemical stability of myoglobin was assessed in the presence of three different salts (NaCl, (NH₄)₂SO₄ and Na₂SO₄), at physiologically relevant concentrations (0-0.3 M). We observed mild destabilization of the native state induced by each ion, attributed to unfavorable neutralization and hydrogen-bonding with the protein side-chains. Both effects, combined with binding of Na⁺, Cl^- and SO₄^2- to the thermally unfolded state, resulted in an overall destabilization of the protein. Contrastingly, ion binding was hindered in the chemically unfolded conformation, due to occupation of the binding sites by urea molecules. Such mechanistic action led to a lower degree of destabilization, promoting surface tension effects that stabilized myoglobin according to the Hofmeister series. Therefore, we demonstrate that Hofmeister effects on protein stability are modulated by the heterogeneous physico-chemical nature of the unfolded state. Altogether, our findings evidence the need to characterize the structure of the unfolded state when attempting to dissect the molecular mechanisms underlying the effects of salts on protein stability.

Remarkable diastereomeric effect on thermoresponsive behavior of polyurethane based on lysine and tartrate ester derivatives

This study describes the long-distance diastereomeric effect on thermoresponsive properties in water-soluble diastereomeric polyurethanes (PUs) composed of an l-lysine ethyl ester diisocyanate and a trimethylene glycol l-/d-tartrate ester, which have differences in spatial arrangements of the ethyl esters in the mirror image. The PUs based on l-lysine and l-/d-tartrate ester, named l-PU and d-PU, were synthesized with various number average molecular weights from 4700 to 13 100. In turbidimetry, l-PU showed a steep phase transition from 100%T to 0%T within about 10 °C at 4 g L⁻¹, whereas d-PU did not change completely to 0%T transmittance even at 80 °C at 4 g L⁻¹. In addition, the thermoresponsive properties of l-PU were less affected by concentration than those of d-PU. This long-distance diastereomeric effect on thermoresponsive behavior between l-PU and d-PU appeared in common among 6 samples with 4700 to 13 100 number average molecular weight. In the dynamic light scattering experiments at each transmittance, the hydrodynamic diameter (D_h) of l-PU increased up to 1000 nm, while the D_h of d-PU remained almost at 200–300 nm. The C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> O stretching vibration of FT-IR spectra showed that d-PU has more hydrogen-bonded ester groups than L-PU. Thus, we speculated that the difference in the retention of polymer chains in the micelle to promote intermicellar bridging generates the long-distance diastereomeric effect.

The long-distance diastereomeric effect on thermoresponsive properties in a polyurethane system consisting of chiral monomers was reported.

Investigating the Role of the Catalyst within Resorcinol-Formaldehyde Gel Synthesis

Resorcinol-formaldehyde (RF) gels are porous materials synthesized via a sol-gel reaction and subsequently dried, producing structures with high surface areas and low densities-properties that are highly attractive for use in various applications. The RF gel reaction takes place in the presence of a catalyst, either acidic or basic in nature, the concentration of which significantly impacts final gel properties. The full extent of the catalyst's role, however, has been subject to debate, with the general consensus within the field being that it is simply a pH-adjuster. The work presented here explores this theory, in addition to other theories postulated in the literature, through the synthesis and analysis of RF gels catalysed by mixtures of relevant compounds with varying concentrations. The relationship between catalyst concentration and initial solution pH is decoupled, and the individual roles of both the cation and the anion within the catalyst are investigated. The results presented here point towards the significance of the metal cation within the RF gel reaction, with similar structural properties observed for gels synthesized at constant Na+ concentrations, regardless of the initial solution pH. Furthermore, through the use of alternative cations and anions within catalyst compounds, the potential effects of ions on the stabilization of macromolecules in solution are explored, the results of which suggest a 'Hofmeister-like' series could be applicable within the catalysis of RF gel reactions.

Local Electric Fields in Aqueous Electrolytes

Vibrational Stark shifts were explored in aqueous solutions of organic molecules with carbonyl- and nitrile-containing constituents. In many cases, the vibrational resonances from these moieties shifted toward lower frequency as salt was introduced into solution. This is in contrast to the blue-shift that would be expected based upon Onsager's reaction field theory. Salts containing well-hydrated cations like Mg²⁺ or Li⁺ led to the most pronounced Stark shift for the carbonyl group, while poorly hydrated cations like Cs⁺ had the greatest impact on nitriles. Moreover, salts containing I^- gave rise to larger Stark shifts than those containing Cl^-. Molecular dynamics simulations indicated that cations and anions both accumulate around the probe in an ion- and probe-dependent manner. An electric field was generated by the ion pair, which pointed from the cation to the anion through the vibrational chromophore. This resulted from solvent-shared binding of the ions to the probes, consistent with their positions in the Hofmeister series. The "anti-Onsager" Stark shifts occur in both vibrational spectroscopy and fluorescence measurements.

Expansion Microscopy with a Thermally Adjustable Expansion Factor Using Thermoresponsive Biospecimen-Hydrogel Hybrids

Expansion microscopy (ExM) is a technique in which swellable hydrogel-embedded biological samples are physically expanded to effectively increase imaging resolution. Here, we develop thermoresponsive reversible ExM (T-RevExM), in which the expansion factor can be thermally adjusted in a reversible manner. In this method, samples are embedded in thermoresponsive hydrogels and partially digested to allow for reversible swelling of the sample-gel hybrid in a temperature-dependent manner. We first synthesized hydrogels exhibiting lower critical solution temperature (LCST)- and upper critical solution temperature (UCST)-phase transition properties with N-alkyl acrylamide or sulfobetaine monomers, respectively. We then formed covalent hybrids between the LCST or UCST hydrogel and biomolecules across the cultured cells and tissues. The resulting hybrid could be reversibly swelled or deswelled in a temperature-dependent manner, with LCST- and UCST-based hybrids negatively and positively responding to the increase in temperature (termed thermonegative RevExM and thermopositive RevExM, respectively). We further showed reliable imaging of both unexpanded and expanded cells and tissues and demonstrated minimal distortions from the original sample using conventional confocal microscopy. Thus, T-RevExM enables easy adjustment of the size of biological samples and therefore the effective magnification and resolution of the sample, simply by changing the sample temperature.

Weak Anion Binding to Poly(N-isopropylacrylamide) Detected by Electrophoretic NMR

Ion specific effects are ubiquitous in solutions and govern a large number of colloidal phenomena. To date, a substantial and sustained effort has been directed at understanding the underlying molecular interactions. As a new approach, we address this issue by sensitive 1H NMR methods that measure the electrophoretic mobility and the self-diffusion coefficient of poly(N-isopropylacrylamide) (PNIPAM) chains in bulk aqueous solution in the presence of salts with the anion component varied from kosmotropes to chaotropes along the Hofmeister series. The accuracy of the applied electrophoretic NMR experiments is exceptionally high, on the order of 10-10 m2/(V s), corresponding to roughly 10-4 elementary charges per monomer effectively associated with the neutral polymer. We find that chaotropic anions associate to PNIPAM with an apparent Langmuir-type saturation behavior. The polymer chains remain extended upon ion association, and momentum transfer from anion to polymer is only partial which indicates weak attractive short-range forces between anion and polymer and, thereby and in contrast to some other ion-polymer systems, the lack of well-defined binding sites.

Contact Ion Pairs in the Bulk Affect Anion Interactions with Poly(N-isopropylacrylamide)

Salt effects on the solubility of uncharged polymers in aqueous solutions are usually dominated by anions, while the role of the cation with which they are paired is often ignored. In this study, we examine the influence of three aqueous metal iodide salt solutions (LiI, NaI, and CsI) on the phase transition temperature of poly(N-isopropylacrylamide) (PNIPAM) by measuring the turbidity change of the solutions. Weakly hydrated anions, such as iodide, are known to interact with the polymer and thereby lead to salting-in behavior at low salt concentration followed by salting-out behavior at higher salt concentration. When varying the cation type, an unexpected salting-out trend is observed at higher salt concentrations, Cs⁺ > Na⁺ > Li⁺. Using molecular dynamics simulations, it is demonstrated that this originates from contact ion pair formation in the bulk solution, which introduces a competition for iodide ions between the polymer and cations. The weakly hydrated cation, Cs⁺, forms contact ion pairs with I^- in the bulk solution, leading to depletion of CsI from the polymer-water interface. Microscopically, this is correlated with the repulsion of iodide ions from the amide moiety.

Spectroscopically Quantifying the Influence of Salts on Nonionic Surfactant Chemical Potentials and Micelle Formation

The influence of two salts (NaSCN and Na₂SO₄) on the micellization of a nonionic surfactant (1,2-hexanediol) is quantified using Raman multivariate curve resolution spectroscopy, combined with a generalized theoretical analysis of the corresponding chemical potential changes. Although the SCN^- and SO₄^2- anions are on opposite ends of the Hofmeister series, they are both found to lower the critical micelle concentration. Our combined spectroscopic and theoretical analysis traces these observations to the fact that in both salt solutions the ions have a greater affinity for (or are less strongly expelled from) the hydration shell of the micelle than the free surfactant monomer, as quantified using the corresponding chemical potentials and Wyman-Tanford coefficients. This probe-free experimental and theoretical analysis strategy may readily be extended to micelle formation processes involving other surfactants, salts, and cosolvents, as well as to other sorts of aggregation and binding processes.