Enhanced Cuprophilic Interactions in Crystalline Catalysts Facilitate the Highly Selective Electroreduction of CO2 to CH4

A Covalent Organic Nanoribbon: Preparation, Single-Crystal Structure with Chinese Luban Lock Configuration, and Photocatalytic Behavior

The multiple mortise-and-tenon joint parts are the core factors to provide the structural stability and diversity of Chinese Luban locks; however, constructing such structures is very challenging. Herein, single crystals of a covalent organic nanoribbon (named CityU-27) are prepared through the assembly of hexahydroxytriphenylene (HHTP), 4,4'-vinylenedipyridine (BYE), and phenylboronic acid (BA) together through dative boron←nitrogen (B←N) bonds. The single-crystal X-ray diffraction analysis indicates that CityU-27 has a covalent organic nanoribbon structure, where each nanoribbon forms multiple and tight π-π interactions with four neighboring others to generate a Luban lock-like configuration. CityU-27 has been demonstrated to be an efficient photocatalyst in a one-pot tandem reaction of hydrogen evolution reaction (HER) and semi-hydrogenation reaction of alkynes in series to produce olefins without any additional photosensitizers and co-catalysts (metal-free).

Acid-Stable Cu Cluster Precatalysts Enable High Energy and Carbon Efficiency in CO2 Electroreduction

The electrochemical reduction of CO2 in acidic media offers the advantage of high carbon utilization, but achieving high selectivity to C2+ products at a low overpotential remains a challenge. We identified the chemical instability of oxide-derived Cu catalysts as a reason that advances in neutral/alkaline electrolysis do not translate to acidic conditions. In acid, Cu ions leach from Cu oxides, leading to the deactivation of the C2+-active sites of Cu nanoparticles. This prompted us to design acid-stable Cu cluster precatalysts that are reduced in situ to active Cu nanoparticles in strong acid. Operando Raman and X-ray spectroscopy indicated that the bonding between the Cu cluster precatalyst ligand and in situ formed Cu nanoparticles preserves a high density of undercoordinated Cu sites, resulting in a C2H4 Faradaic efficiency of 62% at a low overpotential. The result is a 1.4-fold increase in energy efficiency compared with previous acidic CO2-to-C2+ electrocatalytic systems.

C-H amination chemistry mediated by trinuclear Cu(I) sites supported by a ligand scaffold featuring an arene platform and tetramethylguanidinyl residues

Tripodal ligands that can encapsulate single or multiple metal sites in C3-symmetric geometric configurations constitute valuable targets for novel catalysts. Of particular interest in ligand development are efforts toward incorporating apical elements that exhibit little if any electron donicity, to enhance the electrophilic nature of a trans positioned active oxidant (e.g., metal-oxo, -nitrene). The tripodal ligand TMG3trphen-Arene has been synthesized, featuring an arene platform 1,3,5-substituted with phenylene arms possessing tetramethylguanidinyl (TMG) residues. Compound [(TMG3trphen-Arene)Cu3(μ-Cl)3] has been subsequently synthesized by extracting a Cu3(μ-Cl)3 cluster from anhydrous CuCl and shown to encapsulate a crown-shaped Cu3(μ-Cl)3 fragment, supported by Cu-NTMG bonds and modest Cu3⋯arene long-range contacts. Energy decomposition analysis (EDA) indicates that electrostatic contributions to the total interaction energy far exceed those due to orbital interactions. The latter involve orbital pairings largely associated with the NTMG stabilization of the Cu3(μ-Cl)3 cluster. The independent gradient model based on the Hirshfeld partition (IGMH) corroborates that contacts between the arene platform and the Cu3 triangle are noncovalent in nature. Catalyst [(TMG3trphen-Arene)Cu3(μ-Cl)3] enables amination of sec-benzylic and tert-C-H bonds of a panel of substrates by pre-synthesized PhINTces in solvent matrices that incorporate small amounts of HFIP. The involvement of an electrophilic aminating agent is evidenced by the better yields obtained for electron-rich benzylic sites and is further supported by Hammett analysis that reveals the development of a small positive charge during C-H bond activation. A rather modest KIE effect (2.1) is obtained from intramolecular H(D) competition in the amination of ethylbenzene, at the borderline of reported values for concerted and stepwise C-H amination systems. DFT analysis of the putative copper-nitrene oxidant indicates that the nitrene N atom is bridging between two copper sites in closely spaced triplet (ground state) and broken-symmetry singlet electronic configurations.

f-π* Back-Bonding Orbital Induced by a Lutetium-Based Conducting Metal-Organic Framework Promotes Highly Selective CO2-to-CH4 Conversion at Low Potential

The research on electrocatalytic carbon dioxide reduction (ECR) catalysts using renewable energy is particularly crucial in energy conversion studies, especially for viable hydrocarbon production. This study employs density functional theory calculations to screen a series of non-radioactive lanthanide two-dimensional metal-organic frameworks (MOFs) for product selectivity in ECR. Based on theoretical screening, our focus is on a lutetium (Lu)-based conducting MOF (Lu-HHTP), which exhibits a Faradaic efficiency of approximately 77 % for methane (CH4) production and maintains a stable current density of -280 mA/cm2 at -1.1 V vs. RHE. In situ electrochemical experiments and material characterization demonstrate that the Lu sites possess high coordination stability and structural recoverability during catalytic CO2 reduction, attributed to the overlap between Lu's f-orbitals and the π*-orbitals of the ligand O, and the formation of back bonding orbitals between the f-orbitals of Lu and the π* orbitals of CO contribute increasing CH4 selectivity and lowering the potential. This study leverages rare-earth MOF-type materials, offering a novel approach to addressing low conductivity and stabilizing rare-earth materials, thereby establishing a theoretical framework for the conversion of linearly adsorbed *CO into hydrocarbons.

1D p-type molecular-based coordination polymer semiconductor with ultrahigh mobility

One-dimensional (1D) semiconductor nanostructures exhibit exceptional performance in mitigating short-channel effects and ensuring low power consumption. However, the scarcity of high-mobility p-type 1D materials impedes further advancement. Molecular-based materials offer high designability in structure and properties, making them a promising candidate for 1D p-type semiconductor materials. A molecular-based 1D p-type material was developed under the guidance of coordination chemistry. Cu-HT (HT is the abbreviation of p-hydroxy thiophenol) combines the merits of highly orbital overlap between Cu and S, fully covered surface modification with phenol functional groups, and unique cuprophilic (Cu-Cu) interactions. As such, Cu-HT has a remarkable hole mobility of 27.2 cm2 V-1 s-1, which is one of the highest reported values for 1D molecular-based materials to date and even surpass those of commonly used amorphous silicon as well as the majority of 1D inorganic materials. This achievement underscores the significant potential of coordination polymers in optimizing carrier transport and represents a major advancement in the synthesis of high-performance, 1D p-type semiconductor materials.

Cuprophilic Interactions in Polymeric [Cu10O2(Mes)6]n

The properties of cuprophilic compounds and the underlying fundamental principles responsible for the Cu(I)···Cu(I) interactions have been the subject of intense research as their diverse structural and physical attributes are being explored. In this light, we performed a new study of the compound [Cu10O2(Mes)6] reported by Haakansson et al. using state of the art experimental and theoretical analysis techniques. Doing this, we found the compound to be a polymer in the solid state, best written as [Cu10O2(Mes)6]n, with unsupported Cu(I)···Cu(I) contacts linking the monomers (2.776 Å). The monomeric unit also exhibits various cuprophilic contacts bridged by mesityl and/or oxo ligands. The compound was analyzed in its solid state, revealing luminescent properties resulting from two distinct fluorescent emissions, as well as in solution, in which its polymeric structure reversibly decomposes. A quantum theory of atoms in molecules (QTAIM) analysis based on density functional theory (DFT) calculations allows to characterize the various Cu(I)···Cu(I) contacts, in which only a few, and not necessarily the shortest, are associated with a bond critical point. Additionally, an energy decomposition analysis of the bonding between monomers indicates that it is dominated by dispersion forces in which the ligands play a dominant role, resulting in bonding energies significantly larger than found in previous DFT investigations based on less bulky models.

Accelerating acidic CO2 electroreduction: strategies beyond catalysts

Carbon dioxide electrochemical reduction (CO2RR) into high-value-added chemicals offers an alternative pathway toward achieving carbon neutrality. However, in conventional neutral or alkaline electrolyte systems, a significant portion of CO2 is converted into (bi)carbonate due to the thermodynamically favorable acid-base neutralization reaction between CO2 and hydroxide ions. This results in the single-pass carbon efficiency (SPCE) being theoretically capped at 50%, presenting challenges for practical applications. Acidic CO2RR can completely circumvent the carbonate issue and theoretically achieve 100% SPCE, garnering substantial attention from researchers in recent years. Nevertheless, acidic CO2RR currently lags behind traditional neutral/alkaline systems in terms of product selectivity, stability, and energy efficiency, primarily because the abundance of H+ ions exacerbates the hydrogen evolution reaction (HER). Encouragingly, significant breakthroughs have been made to address these challenges, with numerous studies indicating that the regulation of the local catalytic environment may be more crucial than the catalyst itself. In this review, we will discuss the main challenges and latest strategies for acidic CO2RR, focusing on three key aspects beyond the catalyst: electrolyte regulation, local catalytic environment modification, and novel designs of gas diffusion electrodes (GDEs)/electrolyzers. We will also conclude the current advancement for acidic CO2RR and provide an outlook, with the hope that this technology will contribute to achieving carbon neutrality and advance towards practical application.

Promoting CO2 Electroreduction to Hydrocarbon Products via Sulfur-Enhanced Proton Feeding in Atomically Precise Thiolate-Protected Cu Clusters

Thiolate-protected Cu clusters with well-defined structures and stable low-coordinated Cu+ species exhibit remarkable potential for the CO2RR and are ideal model catalysts for establishing structure-electrocatalytic property relationships at the atomic level. However, extant Cu clusters employed in the CO2RR predominantly yield 2e- products. Herein, two model Cu4(MMI)4 and Cu8(MMI)4(tBuS)4 clusters (MMI=2-mercapto-1-methylimidazole) are prepared to investigate the synergistic effect of Cu+ and adjacent S sites on the CO2RR. Cu4(MMI)4 can reduce CO2 to deep-reduced products with a 91.0 % Faradaic efficiency (including 53.7 % for CH4) while maintaining remarkable stability. Conversely, Cu8(MMI)4(tBuS)4 shows a remarkable preference for C2+ products, achieving a maximum FE of 58.5 % with a C2+ current density of 152.1 mA⋅cm-2. In situ XAS and ex situ XPS spectra reveal the preservation of Cu+ species in Cu clusters during CO2RR, extensively enhancing the adsorption capacity of *CO intermediate. Moreover, kinetic analysis and theoretical calculations confirm that S sites facilitate H2O dissociation into *H species, which directly participate in the protonation process on adjacent Cu sites for the protonation of *CO to *CHO. This study highlights the important role of Cu-S dual sites in Cu clusters and provides mechanistic insights into the CO2RR pathway at the atomic level.

Steric and electronic influence on Cu-Cu short contacts in β-thioketiminato tricopper(I) clusters

A series of β-thioketiminate copper(I) complex trimers [LCuI]3 were synthesized by modifying the ligand framework with electron-withdrawing groups (F and Cl) or electron-donating groups (iPr and Me) at the N-aryl ring as well as with CF3 groups on the chelating backbone. This ligand modification significantly impacts the enhancement of Cu⋯Cu short contacts, which can be rationalized by using steric and electronic factors of the chelated ligand. We observed that this intramolecular cuprophilicity among [LCuI]3 complexes is primarily governed by the size of N-aryl ortho-substituents. These findings were well supported by X-ray crystallography, Raman spectroscopy, and Mayer bond order analysis. The electronic effects induced by the ligand modification on the LCuI fragment were investigated using CO and 2,4,6-CNC6H2Me3 as probe molecules. Corroborated by the FTIR and CV measurements, our results reveal that the β-thioketiminate SN chelators induce more pronounced changes in the electronic character of the LCuI fragment due to the presence of CF3 groups on the chelating backbone in comparison with the F or Cl substituents on the N-aryl ring.

Enzymatic Activation and Continuous Electrochemical Production of Methane from Dilute CO2 Sources with a Self-Healing Capsule

Converting dilute CO2 source into value-added chemicals and fuels is a promising route to reduce fossil fuel consumption and greenhouse gas emission, but integrating electrocatalysis with CO2 capture still faced marked challenges. Herein, we show that a self-healing metal-organic macrocycle functionalized as an electrochemical catalyst to selectively produce methane from flue gas and air with the lowest applied potential so far (0.06 V vs reversible hydrogen electrode, RHE) through an enzymatic activation fashion. The capsule emulates the enzyme' pocket to abstract one in situ-formed CO2-adduct molecule with the commercial amino alcohols, forming an easy-to-reduce substrate-involving clathrate to combine the CO2 capture with electroreduction for a thorough CO2 reduction. We find that the self-healing system exhibited enzymatic kinetics for the first time with the Michaelis-Menten mechanism in the electrochemical reduction of CO2 and maintained a methane Faraday efficiency (FE) of 74.24% with a selectivity of over 99% for continuous operation over 200 h. A consecutive working lab at 50 mA·cm-2, in an eleven-for-one (10 h working and 1 h healing) electrolysis manner, gives a methane turnover number (TON) of more than 10,000 within 100 h. The integrated electrolysis with CO2 capture facilitates the thorough reduction of flue gas (ca. 13.0% of CO2) and first time of air (ca. 400 ppm of CO2 to 42.7 mL CH4 from 1.0 m3 air). The new self-healing strategy of molecular electrocatalyst with an enzymatic activation manner and anodic shifting of the applied potentials provided a departure from the existing electrochemical catalytic techniques.

Boosting Electrochemical CO2 Reduction on Copper-Based Metal-Organic Frameworks via Valence and Coordination Environment Modulation

Cu-based metal-organic frameworks (MOFs) have attracted much attention for electrocatalytic CO2 reduction to high value-added chemicals, but they still suffer from low selectivity and instability. Here, an associative design strategy for the valence and coordination environment of the metal node in Cu-based MOFs is employed to regulate the CO2 electroreduction to ethylene. A novel "reduction-cleavage-recrystallization" method is developed to modulate the Cu(II)-Trimesic acid (BTC) framework to form a Cu(I)-BTC structure enriched with free carboxyl groups in the secondary coordination environment (SCE). In contrast to Cu(II)-BTC, the Cu(I)-BTC shows higher catalytic activity and better ethylene selectivity (≈2.2-fold) for CO2 electroreduction, which is further enhanced by increasing the content of free carboxyl groups, resulting in ethylene Faraday efficiency of up to 57% and the durability of the catalyst could last for 38 h without performance decline. It indicates that the synergistic effect between Cu(I)-O coordinated structure and free carboxyl groups considerably enhances the dimerization of *CO intermediates and hinders the hydrogenation of *CO intermediates in these competitive pathways. This work unravels the strong dependence of CO2 electroreduction on the Cu valence state and coordination environment in MOFs and provides a platform for designing highly selective electrocatalytic CO2 reduction catalysts.

Tuning CuMgAl-Layered Double Hydroxide Nanostructures to Achieve CH4 and C2+ Product Selectivity in CO2 Electroreduction

Electrochemical CO2 reduction reaction (eCO2RR) over Cu-based catalysts is a promising approach for efficiently converting CO2 into value-added chemicals and alternative fuels. However, achieving controllable product selectivity from eCO2RR remains challenging because of the difficulty in controlling the oxidation states of Cu against robust structural reconstructions during the eCO2RR. Herein, we report a novel strategy for tuning the oxidation states of Cu species and achieving eCO2RR product selectivity by adjusting the Cu content in CuMgAl-layered double hydroxide (LDH)-based catalysts. In this strategy, the highly stable Cu2+ species in low-Cu-containing LDHs facilitated the strong adsorption of *CO intermediates and further hydrogenation into CH4. Conversely, the mixed Cu0/Cu+ species in high-Cu-containing LDHs derived from the electroreduction during the eCO2RR accelerated C-C coupling reactions. This strategy to regulate Cu oxidation states using LDH nanostructures with low and high Cu molar ratios produced an excellent eCO2RR performance for CH4 and C2+ products, respectively.

Restructuring multi-phase interfaces from Cu-based metal-organic frameworks for selective electroreduction of CO2 to C2H4

Multi-phase interfaces are promising for surmounting the energy barriers of electrochemical CO2 reduction involving multiple electron transfer steps, but challenges still remain in constructing interfacial micro-structures and unraveling their dynamic changes and working mechanism. Herein, highly active Ag/Cu/Cu2O heterostructures are in situ electrochemically restructured from Ag-incorporating HKUST-1, a Cu-based metal-organic framework (MOF), and accomplish efficient CO2-to-C2H4 conversion with a high faradaic efficiency (57.2% at -1.3 V vs. RHE) and satisfactory stability in flow cells, performing among the best of recently reported MOFs and their derivatives. The combination of in/ex situ characterizations and theoretical calculations reveals that Ag plays a crucial role in stabilizing Cu(i) and increasing the CO surface coverage, while the active Cu/Cu2O interfaces significantly reduce the energy barrier of C-C coupling toward the boosted ethylene production. This work not only proves MOFs as feasible precursors to derive efficient electrocatalysts on site, but also provides in-depth understanding on the working interfaces at an atomic level.

Ag1+ incorporation via a Zr4+-anchored metalloligand: fine-tuning catalytic Ag sites in Zr/Ag bimetallic clusters for enhanced eCO2RR-to-CO activity

Attaining meticulous dominion over the binding milieu of catalytic metal sites remains an indispensable pursuit to tailor product selectivity and elevate catalytic activity. By harnessing the distinctive attributes of a Zr4+-anchored thiacalix[4]arene (TC4A) metalloligand, we have pioneered a methodology for incorporating catalytic Ag1+ sites, resulting in the first Zr-Ag bimetallic cluster, Zr2Ag7, which unveils a dualistic configuration embodying twin {ZrAg3(TC4A)2} substructures linked by an {AgSal} moiety. This cluster unveils a trinity of discrete Ag sites: a pair ensconced within {ZrAg3(TC4A)2} subunits and one located between two units. Expanding the purview, we have also crafted ZrAg3 and Zr2Ag2 clusters, meticulously mimicking the two Ag site environment inherent in the {ZrAg3(TC4A)2} monomer. The distinct structural profiles of Zr2Ag7, ZrAg3, and Zr2Ag provide an exquisite foundation for a precise comparative appraisal of catalytic prowess across three Ag sites intrinsic to Zr2Ag7. Remarkably, Zr2Ag7 eclipses its counterparts in the electroreduction of CO2, culminating in a CO faradaic efficiency (FECO) of 90.23% at -0.9 V. This achievement markedly surpasses the performance metrics of ZrAg3 (FECO: 55.45% at -1.0 V) and Zr2Ag2 (FECO: 13.09% at -1.0 V). Utilizing in situ ATR-FTIR, we can observe reaction intermediates on the Ag sites. To unveil underlying mechanisms, we employ density functional theory (DFT) calculations to determine changes in free energy accompanying each elementary step throughout the conversion of CO2 to CO. Our findings reveal the exceptional proficiency of the bridged-Ag site that interconnects paired {ZrAg3(TC4A)2} units, skillfully stabilizing *COOH intermediates, surpassing the stabilization efficacy of the other Ag sites located elsewhere. The invaluable insights gleaned from this pioneering endeavor lay a novel course for the design of exceptionally efficient catalysts tailored for CO2 reduction reactions, emphatically underscoring novel vistas this research unshrouds.

Atomic Design of Copper Active Sites in Pristine Metal-Organic Coordination Compounds for Electrocatalytic Carbon Dioxide Reduction

Electrocatalytic carbon dioxide reduction reaction (CO2RR) has emerged as a promising and sustainable approach to cut carbon emissions by converting greenhouse gas CO2 to value-added chemicals and fuels. Metal-organic coordination compounds, especially the copper (Cu)-based coordination compounds, which feature well-defined crystalline structures and designable metal active sites, have attracted much research attention in electrocatalytic CO2RR. Herein, the recent advances of electrochemical CO2RR on pristine Cu-based coordination compounds with different types of Cu active sites are reviewed. First, the general reaction pathways of electrocatalytic CO2RR on Cu-based coordination compounds are briefly introduced. Then the highly efficient conversion of CO2 on various kinds of Cu active sites (e.g., single-Cu site, dimeric-Cu site, multi-Cu site, and heterometallic site) is systematically discussed, along with the corresponding catalytic reaction mechanisms. Finally, some existing challenges and potential opportunities for this research direction are provided to guide the rational design of metal-organic coordination compounds for their practical application in electrochemical CO2RR.

High selective electrocatalytic reduction of carbon dioxide to ethylene enabled by regulating the microenvironment over Cu-Ag nanowires

Copper-based tandem catalysts are effective candidates for yielding multi-carbon (C2+) products in electrochemical reduction of carbon dioxide (CO2RR). However, these catalysts still face a significant challenge regarding in the low selectivity for the production of a specific product. In this study, we report a high selectivity of 77.8 %±2 % at -1.0 V (vs RHE) for the production of C2H4 by using a Cu88Ag12NW catalyst which is primarily prepared through a combined Cu-Ag co-deposition and wet chemical method, employing an attractive strategy focused on regulating the microenvironment over Cu-Ag nanowires. The experimental and computational studies show that the higher *CO coverage and lower intermediate adsorption energy are important reasons for achieving the high C2H4 selectivity of Cu88Ag12NW catalyst. Comsol simulation results indicate that dense nanowires exhibit a nano-limiting effect on OH- ions, thereby leading to an increase in local pH and promoting coupling reactions. The catalyst demonstrates no noticeable decrease in current density or selectivity even after 12 h of continuous operation. The Cu-Ag nanowire composite exhibits remarkable catalytic activity, superior faradaic efficiency, excellent stability, and easy synthesis, which highlights its significant potential for electro-reducing carbon dioxide into valuable products.

Theoretically Designed Cu10Sn3-Cu-SnOx as Three-Component Electrocatalyst for Efficient and Tunable CO2 Reduction to Syngas

Electrocatalytic transformation of CO2 to various syngas compositions is an exceedingly attractive approach to carbon-neutral recycling. Meanwhile, the achievement of selectivity, stability, and tunability of product ratios using single-component electrocatalysts is challenging. Herein, the theoretically-assisted design of the triple-component nanocomposite electrocatalyst Cu10Sn3-Cu-SnOx that addresses this challenge is presented. It is shown that Cu10Sn3 is a valuable electrocatalyst for suitable CO2 reduction to CO, SnO2 for CO2 reduction to formate at large overpotentials, and that the Cu-SnO2 interface facilitates H2 evolution. Accordingly, the interaction between the three functional components affords tunable CO/H2 ratios, from 1:2 to 2:1, of the produced syngas by controlling the applied potentials and relative contents of functional components. The syngas generation is selective (Faradaic efficiency, FE = 100%) at relatively lower cathodic potentials, whereas formate is the only liquid product detected at relatively higher cathodic potentials. The theoretically guided design approach therefore provides a new opportunity to boost the selectivity and stability of CO2 reduction to tunable syngas.

Efficient electrochemical reduction of CO2 to CO in a flow cell device by a pristine Cu5tz6-cluster-based metal-organic framework

The electrochemical reduction of CO2 to CO is a powerful approach to achieving carbon neutrality. Herein, we report a five-nuclear copper cluster-based metal-azolate framework CuTz-1 as an electrocatalyst for the electrochemical CO2 reduction reaction. It achieved a faradaic efficiency (FE) of 62.7% for yielding CO with a partial current density of -35.1 mA cm-2 in flow cell device, which can be preserved for more than ten hours with negligible changes of the current density and FE(CO). Studies of electrocatalytic mechanism studies revealed that the distance of Cu-N was increased, and the coordination number of the Cu ion was reduced, while the oxidation state of Cu was decreased after the electrocatalysis. These findings offer valuable insights into structural changes that influence the performance of the catalyst during the process of the electrochemical reduction of CO2 process.

Constructing N-Containing Poly(p-Phenylene) (PPP) Films Through A Cathodic-Dehalogenation Polymerization Method

Developing the films of N-containing unsubstituted poly(p-phenylene) (PPP) films for diverse applications is significant and highly desirable because the replacement of sp2 C atoms with sp2 N atoms will bring novel properties to the as-prepared polymers. In this research, an electrochemical-dehalogenation polymerization strategy is employed to construct two N-containing PPP films under constant potentials, where 2,5-diiodopyridine (DIPy) and 2,5-dibromopyrazine (DBPz) are used as starting agents. The corresponding polymers are named CityU-23 (for polypyridine) and CityU-24 (for polypyrazine). Moreover, it is found that both polymers can form films in situ on different conductive substrates (i.e., silicon, gold, ITO, and nickel), satisfying potential device fabrication. Furthermore, the as-obtained thin films of CityU-23 and CityU-24 exhibit good performance of alkaline hydrogen evolution reaction with the overpotential of 212.8 and 180.7 mV and the Tafel slope of 157.0 and 122.4 mV dec-1, respectively.

CO2 Electrolyzers

CO2 electrolyzers have progressed rapidly in energy efficiency and catalyst selectivity toward valuable chemical feedstocks and fuels, such as syngas, ethylene, ethanol, and methane. However, each component within these complex systems influences the overall performance, and the further advances needed to realize commercialization will require an approach that considers the whole process, with the electrochemical cell at the center. Beyond the cell boundaries, the electrolyzer must integrate with upstream CO2 feeds and downstream separation processes in a way that minimizes overall product energy intensity and presents viable use cases. Here we begin by describing upstream CO2 sources, their energy intensities, and impurities. We then focus on the cell, the most common CO2 electrolyzer system architectures, and each component within these systems. We evaluate the energy savings and the feasibility of alternative approaches including integration with CO2 capture, direct conversion of flue gas and two-step conversion via carbon monoxide. We evaluate pathways that minimize downstream separations and produce concentrated streams compatible with existing sectors. Applying this comprehensive upstream-to-downstream approach, we highlight the most promising routes, and outlook, for electrochemical CO2 reduction.

Excitonic cuprophilic interactions in one-dimensional hybrid organic-inorganic crystals

The everlasting pursuit of hybrid organic-inorganic lead-free semiconductors has directed the focus towards eco-friendly copper-based systems, perhaps because of the diversity in chemistry, controlling the structure-property relationship. In this work, we report single crystals of a Cu(i) halide-based perovskite-like organic-inorganic hybrid, (TMA)Cu2Br3, (TMA = tetramethylammonium), consisting of unusual one-dimensional inorganic anionic chains of -(Cu2Br3)-, electrostatically stabilized by organic cations, and the Cu(i)-Cu(i) distance of 2.775 Å indicates the possibility of cuprophilic interactions. X-ray photoelectron spectroscopy measurements further confirmed the presence of exclusive Cu(i) in (TMA)Cu2Br3 and electronic structure calculations based on density functional theory suggested a direct bandgap value of 2.50 eV. The crystal device demonstrated an impressive bulk photovoltaic effect due to the emergence of excitonic Cu(i)-Cu(i) interactions, as was clearly visualized in the charge-density plot as well as in the Raman spectroscopic analysis. The single crystals of a silver analogue, (TMA)Ag2Br3, have also been synthesized revealing a Ag(i)-Ag(i) distance of 3.048 Å (signature of an argentophilic interaction). Unlike (TMA)Cu2Br3, where more density of states from Cu compared to Br near the Fermi level was observed, (TMA)Ag2Br3 exhibited the opposite trend, possibly due to variation in the ionic potential influencing the overall bonding scenario.

Coordination Environment Engineering of Metal Centers in Coordination Polymers for Selective Carbon Dioxide Electroreduction toward Multicarbon Products

Electrocatalytic carbon dioxide reduction reaction (CO2RR) toward value-added chemicals/fuels has offered a sustainable strategy to achieve a carbon-neutral energy cycle. However, it remains a great challenge to controllably and precisely regulate the coordination environment of active sites in catalysts for efficient generation of targeted products, especially the multicarbon (C2+) products. Herein we report the coordination environment engineering of metal centers in coordination polymers for efficient electroreduction of CO2 to C2+ products under neutral conditions. Significantly, the Cu coordination polymer with Cu-N2S2 coordination configuration (Cu-N-S) demonstrates superior Faradaic efficiencies of 61.2% and 82.2% for ethylene and C2+ products, respectively, compared to the selective formic acid generation on an analogous polymer with the Cu-I2S2 coordination mode (Cu-I-S). In situ studies reveal the balanced formation of atop and bridge *CO intermediates on Cu-N-S, promoting C-C coupling for C2+ production. Theoretical calculations suggest that coordination environment engineering can induce electronic modulations in Cu active sites, where the d-band center of Cu is upshifted in Cu-N-S with stronger selectivity to the C2+ products. Consequently, Cu-N-S displays a stronger reaction trend toward the generation of C2+ products, while Cu-I-S favors the formation of formic acid due to the suppression of C-C couplings for C2+ pathways with large energy barriers.

Sulfur atom-directed metal-ligand synergistic catalysis in zirconium/hafnium-oxo clusters for highly efficient amine oxidation

The performance applications (e.g., photocatalysis) of zirconium (Zr) and hafnium (Hf) based complexes are greatly hindered by the limited development of their structures and the relatively inert metal reactivity. In this work, we constructed two ultrastable Zr/Hf-based clusters (Zr9-TC4A and Hf9-TC4A) using hydrophobic 4-tert-butylthiacalix[4]arene (H4TC4A) ligands, in which unsaturated coordinated sulfur (S) atoms on the TC4A4- ligand can generate strong metal-ligand synergy with nearby active metal Zr/Hf sites. As a result, these two functionalized H4TC4A ligands modified Zr/Hf-oxo clusters, as catalysts for the amine oxidation reaction, exhibited excellent catalytic activity, achieving very high substrate conversion (>99%) and product selectivity (>90%). Combining comparative experiments and theoretical calculations, we found that these Zr/Hf-based cluster catalysts accomplish efficient amine oxidation reactions through synergistic effect between metals and ligands: (i) The photocatalytic benzylamine (BA) oxidation reaction was achieved by the synergistic effect of the dual active sites, in which, the naked S sites on the TC4A4- ligand oxidize the BA by photogenerated hole and oxygen molecules are reduced by photogenerated electrons on the metal active sites; (ii) in the aniline oxidation reaction, aniline was adsorbed by the bare S sites on ligands to be closer to metal active sites and then oxidized by the oxygen-containing radicals activated by the metal sites, thus completing the catalytic reaction under the synergistic catalytic effect of the proximity metal-ligand. In this work, the Zr/Hf-based complexes applied in the oxidation of organic amines have been realized using active S atom-directed metal-ligand synergistic catalysis and have demonstrated very high reactivity.

Steering the Selectivity of Carbon Dioxide Electroreduction from Single-Carbon to Multicarbon Products on Metal-Organic Frameworks via Facet Engineering

Although metal-organic frameworks (MOFs) have attracted more attention for the electrocatalytic CO2 reduction reaction (CO2RR), obtaining multicarbon products with a high Faradaic efficiency (FE) remains challenging, especially under neutral conditions. Here, we report the controlled synthesis of stable Cu(I) 5-mercapto-1-methyltetrazole framework (Cu-MMT) nanostructures with different facets by rationally modulating the reaction solvents. Significantly, Cu-MMT nanostructures with (001) facets are acquired using isopropanol as a solvent, which favor multicarbon production with an FE of 73.75% and a multicarbon:single-carbon ratio of 3.93 for CO2RR in a neutral electrolyte. In sharp contrast, Cu-MMT nanostructures with (100) facets are obtained utilizing water, promoting single-carbon generation with an FE of 63.98% and a multicarbon: single-carbon ratio of only 0.18. Furthermore, this method can be extended to other Cu-MMT nanostructures with different facets in tuning the CO2 reduction selectivity. This work opens up new opportunities for the highly selective and efficient CO2 electroreduction to multicarbon products on MOFs via facet engineering.

Perfluoroalkyl-Decorated Noble-Metal-Free MOFs for the Highly Efficient One-Pot Four-Component Coupling between Aldehydes, Amines, Alkynes, and Flue Gas CO2

The non-noble-metal catalysed-multicomponent reactions between flue gas CO2 and cheap industrial raw stocks into high value-added fine chemicals is a promising manner for the ideal CO2 utilization route. To achieve this, the key fundamental challenge is the rational development of highly efficient and facile reaction pathway while establishing compatible catalytic system. Herein, through the stepwise solvent-assisted linker installation, post-synthetic fluorination and metalation, we report the construction of a series of perfluoroalkyl-decorated noble-metal-free metal-organic frameworks (MOFs) PCN-(BPY-CuI)-(TPDC-Fx ) [BPY=2,2'-bipyridine-5,5'-dicarboxylate, TPDC-NH2 =2'-amino-[1,1':4',1''-terphenyl]-4,4''-dicarboxylic acid] that can catalyze the one-pot four-component reaction between alkyne, aldehyde, amine and flue gas CO2 for the preparation of 2-oxazolidinones. Such assembly endows the MOFs with superhydrophobic microenvironment, superior water resistance and highly stable catalytic site, leading to 21 times higher turnover numbers than that of homogeneous counterparts. Mechanism investigation implied that the substrates can be efficiently enriched by the MOF wall and then the adsorbed amine species act as an extrinsic binding site towards dilute CO2 through their strong preferential formation to carbamate acid. Moreover, density functional theory calculations suggest the tetrahedral geometry of Cu in MOF offers special resistance towards amine poisoning, thus maintaining its high efficiency during the catalytic process.

Pyrolysis-free synthesis of a high-loading single-atom Cu catalyst for efficient electrocatalytic CO2-to-CH4 conversion

Electrocatalytic CO2-to-CH4 conversion provides a promising means of addressing current carbon resource recycling and intermittent energy storage. Cu-based single-atom catalysts have attracted extensive attention owing to their high intrinsic activity toward CH4 production; however, they suffer from uncontrollable metal loading and aggregation during the conventional pyrolysis process of carbon-based substrates. Herein, we developed a pyrolysis-free method to prepare a single-atom Cu catalyst anchored on a formamide polymer substrate with a high loading amount and well atomic dispersion through a mild polycondensation reaction. Owing to the isolation of copper active sites, efficient CO2-to-CH4 conversion is achieved over the single-atom Cu catalyst, along with the significant suppression of C-C coupling. As a result, the optimal single-atom catalyst with 5.87 wt% of Cu offers high CH4 faradaic efficiencies (FEs) of over 70% in a wide current density range from 100 to 600 mA cm-2 in the flow cell, together with a maximum CH4 partial current density of 415.8 mA cm-2. Moreover, the CH4 FE can reach 74.2% under optimized conditions in a membrane electrode assembly electrolyzer. This work provides new insights into the subtle design of highly efficient electrocatalyst for CO2 reduction.

Cu-based catalyst designs in CO2 electroreduction: precise modulation of reaction intermediates for high-value chemical generation

The massive emission of excess greenhouse gases (mainly CO2) have an irreversible impact on the Earth's ecology. Electrocatalytic CO2 reduction (ECR), a technique that utilizes renewable energy sources to create highly reduced chemicals (e.g. C2H4, C2H5OH), has attracted significant attention in the science community. Cu-based catalysts have emerged as promising candidates for ECR, particularly in producing multi-carbon products that hold substantial value in modern industries. The formation of multi-carbon products involves a range of transient intermediates, the behaviour of which critically influences the reaction pathway and product distribution. Consequently, achieving desirable products necessitates precise regulation of these intermediates. This review explores state-of-the-art designs of Cu-based catalysts, classified into three categories based on the different prospects of the intermediates' modulation: heteroatom doping, morphological structure engineering, and local catalytic environment engineering. These catalyst designs enable efficient multi-carbon generation in ECR by effectively modulating reaction intermediates.

Construction of Low-Coordination Cu-C2 Single-Atoms Electrocatalyst Facilitating the Efficient Electrochemical CO2 Reduction to Methane

Constructing Cu single-atoms (SAs) catalysts is considered as one of the most effective strategies to enhance the performance of electrochemical reduction of CO2 (e-CO2 RR) towards CH4 , however there are challenges with activity, selectivity, and a cumbersome fabrication process. Herein, by virtue of the meta-position structure of alkynyl in 1,3,5-triethynylbenzene and the interaction between Cu and -C≡C-, a Cu SAs electrocatalyst (Cu-SAs/HGDY), containing low-coordination Cu-C2 active sites, was synthesized through a simple and efficient one-step method. Notably, this represents the first achievement of preparing Cu SAs catalysts with Cu-C2 coordination structure, which exhibited high CO2 -to-CH4 selectivity (72.1 %) with a high CH4 partial current density of 230.7 mA cm-2 , and a turnover frequency as high as 2756 h-1 , dramatically outperforming currently reported catalysts. Comprehensive experiments and calculations verified the low-coordination Cu-C2 structure not only endowed the Cu SAs center more positive electricity but also promoted the formation of H•, which contributed to the outstanding e-CO2 RR to CH4 electrocatalytic performance of Cu-SAs/HGDY. Our work provides a novel H⋅-transferring mechanism for e-CO2 RR to CH4 and offers a protocol for the preparation of two-coordinated Cu SAs catalysts.

Continuous electroproduction of formate via CO2 reduction on local symmetry-broken single-atom catalysts

Atomic-level coordination engineering is an efficient strategy for tuning the catalytic performance of single-atom catalysts (SACs). However, their rational design has so far been plagued by the lack of a universal correlation between the coordination symmetry and catalytic properties. Herein, we synthesised planar-symmetry-broken CuN3 (PSB-CuN3) SACs through microwave heating for electrocatalytic CO2 reduction. Remarkably, the as-prepared catalysts exhibited a selectivity of 94.3% towards formate at -0.73 V vs. RHE, surpassing the symmetrical CuN4 catalyst (72.4% at -0.93 V vs. RHE). In a flow cell equipped with a PSB-CuN3 electrode, over 90% formate selectivity was maintained at an average current density of 94.4 mA cm-2 during 100 h operation. By combining definitive structural identification with operando X-ray spectroscopy and theoretical calculations, we revealed that the intrinsic local symmetry breaking from planar D4h configuration induces an unconventional dsp hybridisation, and thus a strong correlation between the catalytic activity and microenvironment of metal centre (i.e., coordination number and distortion), with high preference for formate production in CuN3 moiety. The finding opens an avenue for designing efficient SACs with specific local symmetries for selective electrocatalysis.

Carbene-stabilized enantiopure heterometallic clusters featuring EQE of 20.8% in circularly-polarized OLED

Bright and efficient chiral coinage metal clusters show promise for use in emerging circularly polarized light-emitting materials and diodes. To date, highly efficient circularly polarized organic light-emitting diodes (CP-OLEDs) with enantiopure metal clusters have not been reported. Herein, through rational design of a multidentate chiral N-heterocyclic carbene (NHC) ligand and a modular building strategy, we synthesize a series of enantiopure Au(I)-Cu(I) clusters with exceptional stability. Modulation of the ligands stabilize the chiral excited states of clusters to allow thermally activated delayed fluorescence, resulting in the highest orange-red photoluminescence quantum yields over 93.0% in the solid state, which is accompanied by circularly polarized luminescence. Based on the solution process, a prototypical orange-red CP-OLED with a considerably high external quantum efficiency of 20.8% is prepared. These results demonstrate the extensive designability of chiral NHC ligands to stabilize polymetallic clusters for high performance in chiroptical applications.

Single-site decorated copper enables energy- and carbon-efficient CO2 methanation in acidic conditions

Renewable CH₄ produced from electrocatalytic CO₂ reduction is viewed as a sustainable and versatile energy carrier, compatible with existing infrastructure. However, conventional alkaline and neutral CO₂-to-CH₄ systems suffer CO₂ loss to carbonates, and recovering the lost CO₂ requires input energy exceeding the heating value of the produced CH₄. Here we pursue CH₄-selective electrocatalysis in acidic conditions via a coordination method, stabilizing free Cu ions by bonding Cu with multidentate donor sites. We find that hexadentate donor sites in ethylenediaminetetraacetic acid enable the chelation of Cu ions, regulating Cu cluster size and forming Cu-N/O single sites that achieve high CH₄ selectivity in acidic conditions. We report a CH₄ Faradaic efficiency of 71% (at 100 mA cm^-2) with <3% loss in total input CO₂ that results in an overall energy intensity (254 GJ/tonne CH₄), half that of existing electroproduction routes.

Applications of Metal-Organic Frameworks and Their Derivatives in Electrochemical CO2 Reduction

Electrochemically reducing CO2 to more reduced chemical species is a promising way that not only enables the conversion of intermittent energy resources to stable fuels, but also helps to build a closed-loop anthropogenic carbon cycle. Among various electrocatalysts for electrochemical CO2 reduction, multifunctional metal-organic frameworks (MOFs) have been employed as highly efficient and selective heterogeneous electrocatalysts due to their ultrahigh porosity and topologically diverse structures. Up to now, great progress has been achieved in the design and synthesis of highly active and selective MOF-related catalysts for electrochemical CO2 reduction reaction (CO2RR), and their corresponding reaction mechanisms have been thoroughly studied. In this review, we summarize the recent progress of applying MOFs and their derivatives in CO2RR, with a focus on the design strategies for electrocatalysts and electrolyzers. We first discussed the reaction mechanisms for different CO2RR products and introduced the commonly applied electrolyzer configurations in the current CO2RR system. Then, an overview of several categories of products (CO, HCOOH, CH4, CH3OH, and multi-carbon chemicals) generated from MOFs or their derivatives via CO2RR was discussed. Finally, we offer some insights and perspectives for the future development of MOFs and their derivatives in electrochemical CO2 reduction. We aim to provide new insights into this field and further guide future research for large-scale applications.

Achieving High-Efficient Photoelectrocatalytic Degradation of 4-Chlorophenol via Functional Reformation of Titanium-Oxo Clusters

Rational design of crystalline catalysts with superior light absorption and charge transfer for efficient photoelectrocatalytic (PEC) reaction coupled with energy recovery remains a great challenge. In this work, we elaborately construct three stable titanium-oxo clusters (TOCs, Ti₁₀Ac₆, Ti₁₀Fc₈, and Ti₁₂Fc₂Ac₄) modified with a monofunctionalized ligand (9-anthracenecarboxylic acid (Ac) or ferrocenecarboxylic acid (Fc)) and bifunctionalized ligands (Ac and Fc). They have tunable light-harvesting and charge transfer capacities and thus can serve as outstanding crystalline catalysts to achieve efficient PEC overall reaction, that is, the integration of anodic organic pollutant 4-chlorophenol (4-CP) degradation and cathodic wastewater-to-H₂ conversion. These TOCs can all exhibit very high PEC activity and degradation efficiency of 4-CP. Especially, Ti₁₂Fc₂Ac₄ decorated with bifunctionalized ligands exhibits better PEC degradation efficiency (over 99%) and H₂ generation than Ti₁₀Ac₆ and Ti₁₀Fc₈ modified with a monofunctionalized ligand. The study of the 4-CP degradation pathway and mechanism revealed that such better PEC performance of Ti₁₂Fc₂Ac₄ is probably due to its stronger interactions with the 4-CP molecule and better ^•OH radical production. This work not only presents the effective combination of organic pollutant degradation and simultaneously H₂ evolution reaction using crystalline coordination clusters as both anodic and cathodic catalyst but also develops a new PEC application for crystalline coordination compounds.

Doping and pretreatment optimized the adsorption of *OCHO on bismuth for the electrocatalytic reduction of CO2 to formate

Electrocatalytic reduction of CO₂ to formate is considered as a promising method to achieve carbon neutrality, and the introduction of heteroatoms is an effective strategy to improve the catalytic activity and selectivity of catalysts. However, the structural reconstruction behavior of catalysts driven by voltage is usually ignored. Therefore, we used Cu/Bi₂S₃ as a model to reveal the dynamic reduction process in different atmospheric environments. The catalyst showed an outstanding faradaic efficiency of 94% for formate and a long-term stability of 100 h, and exhibited a high current density of 280 mA cm^-2 in a flow cell. The experimental results and theoretical calculations show that the introduction of copper enhances the adsorption of CO₂, accelerates the charge transfer and reduces the formation barrier of *OCHO, thus promoting the formation of formate. This work draws attention to the effects of saturated gases in the electrolyte during structural evolution and provides a possibility for designing catalysts with high catalytic activity.

Facilitated Photocatalytic CO2 Reduction in Aerobic Environment on a Copper-Porphyrin Metal-Organic Framework

Herein, we fabricated a π-π stacking hybrid photocatalyst by combining two two-dimensional (2D) materials: g-C₃ N₄ and a Cu-porphyrin metal-organic framework (MOF). After an aerobic photocatalytic pretreatment, this hybrid catalyst exhibited an unprecedented ability to photocatalytically reduce CO₂ to CO and CH₄ under the typical level (20 %) of O₂ in the air. Intriguingly, the presence of O₂ did not suppress CO₂ reduction; instead, a fivefold increase compared with that in the absence of O₂ was observed. Structural analysis indicated that during aerobic pretreatment, the Cu node in the 2D-MOF moiety was hydroxylated by the hydroxyl generated from the reduction of O₂ . Then the formed hydroxylated Cu node maintained its structure during aerobic CO₂ reduction, whereas it underwent structural alteration and was reductively devitalized in the absence of O₂ . Theoretical calculations further demonstrated that CO₂ reduction, instead of O₂ reduction, occurred preferentially on the hydroxylated Cu node.

Electronic Perturbation of Copper Single-Atom CO2 Reduction Catalysts in a Molecular Way

Fine-tuning electronic structures of single-atom catalysts (SACs) plays a crucial role in harnessing their catalytic activities, yet challenges remain at a molecular scale in a controlled fashion. By tailoring the structure of graphdiyne (GDY) with electron-withdrawing/-donating groups, we show herein the electronic perturbation of Cu single-atom CO₂ reduction catalysts in a molecular way. The elaborately introduced functional groups (-F, -H and -OMe) can regulate the valance state of Cu^δ+ , which is found to be directly scaled with the selectivity of the electrochemical CO₂ -to-CH₄ conversion. An optimum CH₄ Faradaic efficiency of 72.3 % was achieved over the Cu SAC on the F-substituted GDY. In situ spectroscopic studies and theoretical calculations revealed that the positive Cu^δ+ centers adjusted by the electron-withdrawing group decrease the pK_a of adsorbed H₂ O, promoting the hydrogenation of intermediates toward the CH₄ production. Our strategy paves the way for precise electronic perturbation of SACs toward efficient electrocatalysis.

Solvent-mediated precipitating synthesis and optical properties of polyhydrido Cu13 nanoclusters with four vertex-sharing tetrahedrons

Structurally defined metal nanoclusters facilitate mechanism studies and promote functional applications. However, precisely constructing copper nanoclusters remains a long-standing challenge in nanoscience. Developing new efficient synthetic strategies for Cu nanoclusters is highly desirable. Here, we propose a solvent-mediated precipitating synthesis (SMPS) to prepare Cu13H10(SR)3(PPh3)7 nanoclusters (H-SR = 2-chloro-4-fluorobenzenethiol). The obtained Cu13 nanoclusters are high purity and high yield (39.5%, based on Cu atom), proving the superiority of the SMPS method. The Cu13 nanoclusters were comprehensively studied via a series of characterizations. Single crystal X-ray crystallography shows that the Cu13 nanoclusters contain a threefold symmetry axis and the Cu13 kernel is protected by a monolayer of ligands, including PPh3 and thiolates. Unprecedentedly, the aesthetic Cu13 kernel is composed of four vertex-sharing tetrahedrons, rather than the common icosahedral or cuboctahedral M13. The intramolecular π⋯π interactions between thiolates and PPh3 on the surface contribute to the stable configuration. Furthermore, electrospray ionization mass spectrometry (ESI-MS) and nuclear magnetic resonance (NMR) revealed the existence of ten hydrides, including four types of hydrides. Density functional theory (DFT) calculations without simplifying the ligands simulated the location of the 10 hydrides in the crystal structure. Additionally, the steady-state ultraviolet-visible absorption and fluorescence spectra of the Cu13 nanoclusters exhibit unique optical absorbance and photoluminescence. The ultrafast relaxation dynamics were also studied via transient absorption spectroscopy, and the three decay components are attributed to the relaxation pathways of internal conversion, structural relaxation and radiative relaxation. This work provides not only a novel SMPS strategy to efficiently synthesize Cu13 nanoclusters, but also a better insight into the structural characteristics and optical properties of the Cu nanoclusters.

A porous Ti-based metal-organic framework for CO2 photoreduction and imidazole-dependent anhydrous proton conduction

The anhydrous proton conductivity of Im@IEF-11 resulting from the integration of imidazole and porous IEF-11 has been investigated, and the highest proton conductive value can reach up to 7.64 × 10^-2 S cm^-1. Furthermore, IEF-11 is also developed to reduce CO₂ due to its reasonable structure and suitable energy band, and its CO formation rate is 31.86 μmol g^-1 h^-1.

Ferric ion substitution renders cadmium metal-organic framework derivatives for modulated Li storage based on local oxidation active centers

In this work, a novel anionic Cd-MOF ([(CH₃)₂NH₂]_n[Cd(HL)DMF]_n·2nH₂O·nDMF, H₄L = 1,2,4,5-tetrakis[(4-carboxy)phenoxymethyl]benzene) was synthesized for the first time. As a precursor, it was utilized to obtain Fe@Cd-MOF crystals via the substitution of Fe³⁺ ions due to a negatively charged framework and free-coordinated carboxyl group. Fe₃O₄/Fe-embedded carbon-based materials (Fe@Cd-MOFD) were further constructed by deriving Fe@Cd-MOF at high temperatures. The derived Fe@Cd-MOFD showed a structure resembling a central city with metal redox centers embedded into a carbon matrix. The introduced Fe³⁺ ions formed a local nano-sized metal oxide upon annealing, and these derived carbon materials offered high electronic conductivity. These pushed Fe@Cd-MOFD to remarkable electrochemical performance with an initial discharge capacity of 1703.8 mA h g^-1. This work offers new insights into the fabrication of novel MOF-derived iron oxide hybrids for lithium storage.

A Conductive Dinuclear Cuprous Complex Mimicking the Active Edge Site of the Copper(100)/(111) Plane for Selective Electroreduction of CO2 to C2H4 at Industrial Current Density

Inorganic solids are a kind of important catalysts, and their activities usually come from sparse active sites, which are structurally different from inactive bulk. Therefore, the rational optimization of activity depends on studying these active sites. Copper is a widely used catalyst and is expected to be a promising catalyst for the electroreduction of CO2 to C2H4. Here, we report a conductive dinuclear cuprous complex with a short Cu···Cu contact for the electroreduction of CO2 to C2H4. By using 1H-[1,10]phenanthrolin-2-one and Cu(I) ions, a dinuclear cuprous complex [Cu2(ophen)2] (Cuophen) with a remarkable conductivity (3.9 × 10-4 S m-1) and a short intramolecular Cu···Cu contact (2.62 Å) was obtained. Such a short Cu···Cu contact is close to the distance of 2.54 Å between 2 adjacent Cu atoms in the edge of the copper(100)/(111) plane. Detailed examination of Cuophen revealed a high activity for the electroreduction of CO2 to C2H4 with a Faradaic efficiency of 55(1)% and a current density of 580 mA cm-2, and no obvious degradation was observed over 50 h of continuous operation. Comparing the properties and mechanisms of Cuophen and 2 other copper complexes with different Cu···Cu distances, we found that the shorter Cu···Cu distance is conducive not only for a *CO species to bridge 2 copper ions into a more stable intermediate transition state but also for C-C coupling.

Modulating the Electronic Structures of Dual-Atom Catalysts via Coordination Environment Engineering for Boosting CO2 Electroreduction

Dual-atom catalysts (DACs) have emerged as efficient electrocatalysts for CO₂ reduction owing to the synergistic effect between the binary metal sites. However, rationally modulating the electronic structure of DACs to optimize the catalytic performance remains a great challenge. Herein, we report the electronic structure modulation of three Ni₂ DACs (namely, Ni₂ -N₇ , Ni₂ -N₅ C₂ and Ni₂ -N₃ C₄ ) by the regulation of the coordination environments around the dual-atom Ni₂ centres. As a result, Ni₂ -N₃ C₄ exhibits significantly improved electrocatalytic activity for CO₂ reduction, not only better than the corresponding single-atom Ni catalyst (Ni-N₂ C₂ ), but also higher than Ni₂ -N₇ and Ni₂ -N₅ C₂ DACs. Density functional theory (DFT) calculations revealed that the high electrocatalytic activity of Ni₂ -N₃ C₄ for CO₂ reduction could be attributed to the electronic structure modulation to the Ni centre and the resulted proper binding energies to COOH* and CO* intermediates.

Challenges and Opportunities in Electrocatalytic CO2 Reduction to Chemicals and Fuels

The global temperature increase must be limited to below 1.5 °C to alleviate the worst effects of climate change. Electrocatalytic CO2 reduction (ECO2 R) to generate chemicals and feedstocks is considered one of the most promising technologies to cut CO2 emission at an industrial level. However, despite decades of studies, advances at the laboratory scale have not yet led to high industrial deployment rates. This Review discusses practical challenges in the industrial chain that hamper the scaling-up deployment of the ECO2 R technology. Faradaic efficiencies (FEs) of about 100 % and current densities above 200 mA cm-2 have been achieved for the ECO2 R to CO/HCOOH, and the stability of the electrolysis system has been prolonged to 2000 h. For ECO2 R to C2 H4 , the maximum FE is over 80 %, and the highest current density has reached the A cm-2 level. Thus, it is believed that ECO2 R may have reached the stage for scale-up. We aim to provide insights that can accelerate the development of the ECO2 R technology.

Rational Design of Metal-Organic Frameworks for Electroreduction of CO2 to Hydrocarbons and Carbon Oxygenates

Since CO2 can be reutilized by using renewable electricity in form of product diversity, electrochemical CO2 reduction (ECR) is expected to be a burgeoning strategy to tackle environmental problems and the energy crisis. Nevertheless, owing to the limited selectivity and reaction efficiency for a single component product, ECR is still far from a large-scale application. Therefore, designing high performance electrocatalysts is the key objective in CO2 conversion and utilization. Unlike most other types of electrocatalysts, metal-organic frameworks (MOFs) have clear, designable, and tunable catalytic active sites and chemical microenvironments, which are highly conducive to establish a clear structure-performance relationship and guide the further design of high-performance electrocatalysts. This Outlook concisely and critically discusses the rational design strategies of MOF catalysts for ECR in terms of reaction selectivity, current density, and catalyst stability, and outlines the prospects for the development of MOF electrocatalysts and industrial applications. In the future, more efforts should be devoted to designing MOF structures with high stability and electronic conductivity besides high activity and selectivity, as well as to develop efficient electrolytic devices suitable for MOF catalysts.

Electro-Synthesis of Organic Compounds with Heterogeneous Catalysis

Electro-organic synthesis has attracted a lot of attention in pharmaceutical science, medicinal chemistry, and future industrial applications in energy storage and conversion. To date, there has not been a detailed review on electro-organic synthesis with the strategy of heterogeneous catalysis. In this review, the most recent advances in synthesizing value-added chemicals by heterogeneous catalysis are summarized. An overview of electrocatalytic oxidation and reduction processes as well as paired electrocatalysis is provided, and the anodic oxidation of alcohols (monohydric and polyhydric), aldehydes, and amines are discussed. This review also provides in-depth insight into the cathodic reduction of carboxylates, carbon dioxide, CC, C≡C, and reductive coupling reactions. Moreover, the electrocatalytic paired electro-synthesis methods, including parallel paired, sequential divergent paired, and convergent paired electrolysis, are summarized. Additionally, the strategies developed to achieve high electrosynthesis efficiency and the associated challenges are also addressed. It is believed that electro-organic synthesis is a promising direction of organic electrochemistry, offering numerous opportunities to develop new organic reaction methods.

In situ resource utilization of lunar soil for highly efficient extraterrestrial fuel and oxygen supply

Building up a lunar settlement is the ultimate aim of lunar exploitation. Yet, limited fuel and oxygen supplies restrict human survival on the Moon. Herein, we demonstrate the in situ resource utilization of lunar soil for extraterrestrial fuel and oxygen production, which may power up our solely natural satellite and supply respiratory gas. Specifically, the lunar soil is loaded with Cu species and employed for electrocatalytic CO₂ conversion, demonstrating significant production of methane. In addition, the selected component in lunar soil (i.e. MgSiO₃) loaded with Cu can reach a CH₄ Faradaic efficiency of 72.05% with a CH₄ production rate of 0.8 mL/min at 600 mA/cm². Simultaneously, an O₂ production rate of 2.3 mL/min can be achieved. Furthermore, we demonstrate that our developed process starting from catalyst preparation to electrocatalytic CO₂ conversion is so accessible that it can be operated in an unmmaned manner via a robotic system. Such a highly efficient extraterrestrial fuel and oxygen production system is expected to push forward the development of mankind's civilization toward an extraterrestrial settlement.