Colloidal Alloyed Quantum Dots with Enhanced Photoluminescence Quantum Yield in the NIR-II Window

Multifunctional Near-Infrared Phosphors Cr3+/Ni2+ Codoped Mg3Ga2GeO8 Based on Energy Transfer from Cr3+ to Ni2

Currently, near-infrared (NIR) light-emitting materials have been widely used in many fields, such as night vision, bioimaging, and nondestructive analysis. However, it is difficult to achieve multifunction in certain NIR light emitting phosphor. Herein, we propose a new near-infrared phosphor Mg3Ga2GeO8:Cr3+,Ni2+ that can be applied to at least three fields, i.e., identification of compounds, temperature sensing, anticounterfeiting, and other applications. The multifunctional material exhibited efficient broadband emission of 650-1650 nm under 420 nm excitation. The emission intensity of Ni2+ in Mg3Ga2GeO8:Cr3+,Ni2+ is enhanced by two times compared with that of Ni2+ in Mg3Ga2GeO8:Ni2+ due to the energy transfer process. Compared with phosphor single doped with Ni2+, Mg3Ga2GeO8:Cr3+,Ni2+ is more convincing in organic compound recognition because it is based on two emission bands: 600-1100 nm and 1100-1650 nm. As a temperature sensor, Mg3Ga2GeO8:Cr3+,Ni2+ is an ideal temperature-sensing material. This work not only provides a super broadband NIR emitting phosphor with multiple functions but also presents a practical approach for the development of high-efficiency and multifunctional NIR phosphors.

Neutral Cyanine: Ultra-Stable NIR-II Merocyanines for Highly Efficient Bioimaging and Tumor-Targeted Phototheranostics

Fluorescence imaging (FLI)-guided phototheranostics using emission from the second near-infrared (NIR-II) window show significant potential for cancer diagnosis and treatment. Clinical imaging-used polymethine ionic indocyanine green (ICG) dye is widely adopted for NIR fluorescence imaging-guided photothermal therapy (PTT) research due to its exceptional photophysical properties. However, ICG has limitations such as poor photostability, low photothermal conversion efficiency (PCE), short-wavelength emission peak, and liver-targeting issues, which restrict its wider use. In this study, two ionic ICG derivatives are transformed into neutral merocyanines (mCy) to achieve much-enhanced performance for NIR-II cancer phototheranostics. Initial designs of two ionic dyes show similar drawbacks as ICG in terms of poor photostability and low photothermal performance. One of the modified neutral molecules, mCy890, shows significantly improved stability, an emission peak over 1000 nm, and a high photothermal PCE of 51%, all considerably outperform ICG. In vivo studies demonstrate that nanoparticles of the mCy890 can effectively accumulate at the tumor sites for cancer photothermal therapy guided by NIR-II fluorescence imaging. This research provides valuable insights into the development of neutral merocyanines for enhanced cancer phototheranostics.

Engineering Visible to Near-Infrared Luminescence through a Selective Doping Strategy for High-Performance Temperature Sensing

Luminescence nanothermometers have garnered considerable attention due to their noncontact measurement, high spatial resolution, and rapid response. However, many nanothermometers employing single-mode measurement encounter challenges regarding their relative sensitivity. Herein, a unique class of tunable upconversion (UC) and downshifting (DS) luminescence covering the visible to near-infrared range (400-1700 nm) is reported, characterized by the superior Tm3+, Ho3+, and Er3+ emissions induced by efficient energy transfer. The outstanding negative thermal expansion characteristic of ScF3 nanocrystals has been found to guide excitation energy toward the relevant emitting states in the Yb3+-Ho3+-Tm3+-codoped system, consequently resulting in remarkable near-infrared III (NIR-III) luminescence at ∼1625 nm (Tm3+:3F4 → 3H6 transition), which in turn presents numerous opportunities for designing multimode ratiometric luminescence thermometry. Furthermore, by facilitating phonon-assisted energy transfer in Er3+-Ho3+-codoped systems, the luminescence intensity ratio (LIR) of 4I13/2 of Er3+ and 5I6 of Ho3+ in ScF3:Yb3+/Ho3+/Er3+ exhibits a strong temperature dependence, enabling NIR-II/III luminescence thermometry with superior thermal sensitivity and resolution (Sr = 0.78% K-1, δT = 0.64 K). These findings not only underscore the distinctive and ubiquitous attributes of lanthanide ion-doped nanomaterials but also hold significant implications for crafting luminescence thermometers with unparalleled sensitivity.

The Molecular Design and Electroluminescent Performance of Near-Infrared (NIR) Iridium(III) Complexes Bearing Isoquinoline-, Phthalazine- and Phenazine-Based Ligands

Near-infrared (NIR) light has characteristics of invisibility to human eyes, less background interference, low light scattering, and strong cell penetration. Therefore, NIR luminescent materials have significant applications in imaging, sensing, energy, information storage and display. The development of NIR luminescent materials thus has emerged as a highly dynamic area of research in the realm of contemporary materials. To date, NIR luminescent materials are roughly divided into inorganic materials and organic materials. Compared with inorganic materials, organic NIR luminescent materials have become a hot research topic in recent years due to their rich sources, easy control of structure, simple preparation process, low cost, and good film-forming properties. Among them, iridium(III) [Ir(III)] complexes exhibit excellent properties such as thermal stability, simple synthesis, easy color modulation, short excited state lifetimes, and high brightness, thus becoming one of the ideal luminescent material systems for preparing high-quality organic light-emitting diodes. Therefore, how to obtain Ir(III) complexes with NIR emission and high efficiency through molecular design is a necessary and promising research topic. This work reviews the research progress of representative NIR Ir(III) complexes bearing isoquinoline-, phenazine-, and phthalazine-based ligands reported in recent years and introduces the design strategies and electroluminescent performances of NIR Ir(III) complexes.

Nature Products Chlorophyll Derivatives for NIR-II Fluorescence Bioimaging and Plant-Imaging

The second near-infrared window (NIR-II, 1000-1700 nm) fluorescence imaging has attracted significant attention in research fields because of its unique advantages compared with conventional optical windows (400-900 nm). A variety of NIR-II fluorophores have been actively studied because they serve as a key component of fluorescence imaging. Among them, organic small molecule NIR-II fluorophores display outstanding imaging performance and many advantages, but types of small molecule NIR-II fluorophores with high biocompatibility are still quite limited. Novel molecular scaffolds based NIR-II dyes are highly desired. Herein, we hypothesized that chlorophyll is a new promising molecular platform for discovery NIR-II fluorophores. Thus, seven derivatives of derivatives were selected to characterize their optical properties. Interestingly, six chlorophyll derivatives displayed NIR-II fluorescence imaging capability. This characteristic allowed the successful NIR-II imaging of green leaves of various plants. Furthermore, most of these fluorophores showed capacity to monitor viscosity change because of their sensitive for viscosity. For demonstration of its biomedical applications, these probes were successfully used for NIR-II fluorescence-guided surgical resection of lymph nodes. In summary, chlorophylls are novel valuable tool molecules for NIR-II fluorescence imaging and have potential to expand their applications in biomedical field and plant science.

Research Progress of Heavy-Metal-Free Quantum Dot Light-Emitting Diodes

At present, heavy-metal-free quantum dot light-emitting diodes (QLEDs) have shown great potential as a research hotspot in the field of optoelectronic devices. This article reviews the research on heavy-metal-free quantum dot (QD) materials and light-emitting diode (LED) devices. In the first section, we discussed the hazards of heavy-metal-containing quantum dots (QDs), such as environmental pollution and human health risks. Next, the main representatives of heavy-metal-free QDs were introduced, such as InP, ZnE (E=S, Se and Te), CuInS2, Ag2S, and so on. In the next section, we discussed the synthesis methods of heavy-metal-free QDs, including the hot injection (HI) method, the heat up (HU) method, the cation exchange (CE) method, the successful ionic layer adsorption and reaction (SILAR) method, and so on. Finally, important progress in the development of heavy-metal-free QLEDs was summarized in three aspects (QD emitter layer, hole transport layer, and electron transport layer).

Heteroions Radii Matching Produced Intensely Luminescent Bismuth-Ag2S Nanocrystals for through-Skull NIR-II Imaging of Orthotopic Glioma

Heteroions doped Ag2S nanocrystals (NCs) exhibiting enhanced near-infrared-II emission (NIR-II) hold great promise for glioma diagnosis. Nevertheless, current doped Ag2S NCs paradoxically improved properties via toxic dopants, and the blood-brain barrier (BBB) constitutes another challenge for orthotopic glioma imaging. Thus, it is urgent to develop biofriendly high-bright Ag2S NCs with active BBB-penetration for glioma-targeted imaging. Herein, bismuth (Bi) was screened to obtain Bi-Ag2S NCs with high absolute PLQY (∼13.3%) for its matched ionic-radius (1.03 Å) with Ag+. The Bi-Ag2S NCs exhibited a higher luminance and deeper penetration (5-6 mm) than clinical indocyanine green. Upon conjugation with lactoferrin, the NCs acquired BBB-crossing and glioma-targeting abilities. Time-dependent NIR-II-imaging demonstrated their effective accumulation in glioma with skull/scalp intact after intravenous injection. Moreover, the toxic-metal-free NCs exhibited negligible toxicity and great biocompatibility. The success of leveraging the ion-radii comparison may unlock the full potential of doped-Ag2S NCs in bioimaging and inspire the development of various doped NIR-II NCs.

Pseudotetrahedral Organotin-Capped Chalcogenidometalate Supermolecules with Optical Limiting Performance

The rational design of crystalline clusters with adjustable compositions and dimensions is highly sought after but quite challenging as it is important to understand their structural evolution processes and to systematically establish structure-property relationships. Herein, a family of organotin-based sulfidometalate supertetrahedral clusters has been prepared via mixed metal and organotin strategies at low temperatures (60-120 °C). By engineering the metal composition, we can effectively control the size of the clusters, which ranges from 8 to 35, accompanied by variable configurations: P1-[(RSn)4M4S13], T3-[(RSn)4In4M2S16] (R = nbutyl-Bu and phenyl-Ph; M = Cd, Zn, and Mn), T4-[(BuSn)4In13Cu3S31], truncated P2, viz. TP2-[(BuSn)6In10Cu6S31], and even T5-[(BuSn)4In22Zn6Cu3S52], all of which are the largest organometallic supertetrahedral clusters known to date. Of note, the arylstannane approach plays a critical role in regulating the peripheral ligands and further enriching geometric structures of the supertetrahedral clusters. This is demonstrated by the formation of tin-oxysulfide clusters, such as T3-[(RSn)4Sn6O4S16] (R = Bu, Ph, and benzyl = Be) and its variants, truncated T3, viz., TT3-[(BuSn)6Sn3O4S13] and augmented T3, viz., T3-[(Bu3SnS)4Sn6O4S16]. Especially, two extraordinary truncated clusters break the tetrahedral symmetry observed in typical supertetrahedral clusters, further substantiating the advantages offered by the arylstannane approach in expanding cluster chemistry. These organometallic supertetrahedral clusters are highly soluble and stable in common solvents. Additionally, they have tunable third-order nonlinear optical behaviors by controlling the size, heterometallic combination, organic modification, and intercluster interaction.

Programmed Remodeling of the Tumor Milieu to Enhance NK Cell Immunotherapy Combined with Chemotherapy for Pancreatic Cancer

Natural killer (NK) cell-based adoptive immunotherapy has demonstrated encouraging therapeutic effects in clinical trials for hematological cancers. However, the effectiveness of treatment for solid tumors remains a challenge due to insufficient recruitment and infiltration of NK cells into tumor tissues. Herein, a programmed nanoremodeler (DAS@P/H/pp) is designed to remodel dense physical stromal barriers and for dysregulation of the chemokine of the tumor environment to enhance the recruitment and infiltration of NK cells in tumors. The DAS@P/H/pp is triggered by the acidic tumor environment, resulting in charge reversal and subsequent hyaluronidase (HAase) release. HAase effectively degrades the extracellular matrix, promoting the delivery of immunoregulatory molecules and chemotherapy drugs into deep tumor tissues. In mouse models of pancreatic cancer, this nanomediated strategy for the programmed remodeling of the tumor microenvironment significantly boosts the recruitment of NK92 cells and their tumor cell-killing capabilities under the supervision of multiplexed near-infrared-II fluorescence.

Rational Design of NIR-II Ratiometric Fluorescence Probes for Accurate Bioimaging and Biosensing In Vivo

Intravital fluorescence imaging in the second near-infrared window (NIR-II, 900-1700 nm) has emerged as a promising method for non-invasive diagnostics in complex biological systems due to its advantages of less background interference, high tissue penetration depth, high imaging contrast, and sensitivity. However, traditional NIR-II fluorescence imaging, which is characterized by the "always on" or "turn on" mode, lacks the ability of quantitative detection, leading to low reproducibility and reliability during bio-detection. In contrast, NIR-II ratiometric fluorescence imaging can realize quantitative and reliable analysis and detection in vivo by providing reference signals for fluorescence correction, generating new opportunities and prospects during in vivo bioimaging and biosensing. In this review, the current design strategies and sensing mechanisms of NIR-II ratiometric fluorescence probes for bioimaging and biosensing applications are systematically summarized. Further, current challenges, future perspectives and opportunities for designing NIR-II ratiometric fluorescence probes are also discussed. It is hoped that this review can provide effective guidance for the design of NIR-II ratiometric fluorescence probes and promote its adoption in reliable biological imaging and sensing in vivo.

Design of donor-acceptor conjugated polymers based on diketopyrrolopyrrole for NIR-II multifunctional imaging

Diketopyrrolopyrrole (DPP) is an excellent photosensitizer and photothermal agent with the advantages of good planarity, strong electron affinity, high electron mobility, easy purification, easy structural modification and high molar absorption coefficient. It is regarded as one of the ideal choices for the design and synthesis of efficient organic photovoltaic materials. Therefore, two kinds of donor-acceptor (D-A) conjugated polymers were designed and synthesized with DPP as the acceptor, and their optical properties and applications in the near-infrared region were studied. The quantum yield (QY) of PBDT-DPP is 0.46%, and the highest temperature reached within 10 minutes after irradiation with a 660 nm laser is 60 °C. Another polymer, EDOT-DPP, has a QY of 0.48%, and its semiconductor polymer nanoparticle aqueous solution can reach 60 °C within 12 minutes under laser irradiation, achieving photothermal treatment of nude mice tumors. Both polymer NPs have good biocompatibility and promising applications in bioimaging and photothermal therapy.

The Down-Shifting Luminescence of Rare-Earth Nanoparticles for Multimodal Imaging and Photothermal Therapy of Breast Cancer

Nanotheranostic agents capable of simultaneously enabling real-time tracking and precise treatment at tumor sites play an increasingly pivotal role in the field of medicine. In this article, we report a novel near-infrared-II window (NIR-II) emitting downconversion rare-earth nanoparticles (RENPs) to improve image-guided therapy for breast cancer. The developed α-NaErF4@NaYF4 nanoparticles (α-Er NPs) have a diameter of approximately 24.1 nm and exhibit superior biocompatibility and negligible toxicity. RENPs exhibit superior imaging quality and photothermal conversion efficiency in the NIR-II range compared to clinically approved indocyanine green (ICG). Under 808 nm laser irradiation, the α-Er NPs achieve significant tumor imaging performance and photothermal effects in vivo in a mouse model of breast cancer. Simultaneously, it combines X-ray computed tomography (CT) and ultrasound (US) tri-modal imaging to guide therapy for cancer. The integration of NIR-II imaging technology and RENPs establishes a promising foundation for future medical applications.

NIR-II fluorescence imaging without intended excitation light

Nowadays, second near-infrared window (NIR-II) dyes are almost excited by laser diodes, but none of the white light (400-700 nm) excited NIR-II imaging has been studied because of the lack of suitable optical probes. Herein, a novel blue-shifted NIR-II dye, TPA-TQT, has been selected for use in multi-wavelength white light emitting diode (LED) excited NIR-II imaging. This white LED barely caused photo-quenching of the dyes, especially indocyanine green (ICG), whereas the ICG's brightness decreased by 90% under continuous 808 nm laser irradiation. Compared to single-wavelength LED, multi-wavelength LED showed a lower background and similar signal-to-background ratios. This system provided high image resolution to identify blood vessels (103 μm), lymphatic capillaries (129.8 μm), and to monitor hindlimb ischemia-reperfusion and lymphatic inflammation. Furthermore, white LED excited NIR-II fluorescence imaging-guided surgery (FIGS) was successfully performed in 4T1 tumor-bearing mice. Impressively, the lighting LED-based NIR-II FIGS was found to clearly delineate small lesions of metastatic tumors of about ∼350 μm diameter and further was able to guide surgical removal. Overall, multi-wavelength LED-based NIR-II imaging is a promising imaging strategy for tumor delineation and other biomedical applications.

Carboxyl-Modified Quantum Dots for NIR-IIb Bone Marrow Imaging

Real-time, noninvasive, and nonradiative bone imaging can directly visualize bone health but requires bone-targeted probes with high specificity. Herein, we propose that carboxyl-rich fluorescent nanoprobes are easily absorbed by macrophages in bone marrow during circulation, enabling optical bone marrow imaging in vivo. We used PbS/CdS core-shell quantum dots with NIR-IIb (1500-1700 nm) emission as substrates to prepare the carboxyl-rich nanoprobe. In vivo NIR-IIb fluorescence imaging with the nanoprobes showed high resolution and penetration depth in bone tissues and allowed for imaging-guided fracture diagnosis. Bone tissue slices showed substantial accumulation of carboxyl nanoprobes in the bone marrow and strong colocalization with macrophages. Similar results with CdSe quantum dots and an organic nanofluorophore suggest that carboxyl surface modification is effective to achieve bone marrow targeting, providing a novel strategy for developing bone/bone marrow imaging probes.

Size Modulation of Conjugated Polymer Nanoparticles for Improved NIR-II Fluorescence Imaging and Photothermal Therapy

Near-infrared-II fluorescence imaging (NIR-II FI) has become a powerful imaging technique for disease diagnosis owing to its superiorities, including high sensitivity, high spatial resolution, deep imaging depth, and low background interference. Despite the widespread application of conjugated polymer nanoparticles (CPNs) for NIR-II FI, most of the developed CPNs have quite low NIR-II fluorescence quantum yields based on the energy gap law, which makes high-sensitivity and high-resolution imaging toward deep lesions still a huge challenge. This work proposes a nanoengineering strategy to modulate the size of CPNs aimed at optimizing their NIR-II fluorescence performance for improved NIR-II phototheranostics. By adjusting the initial concentration of the synthesized conjugated polymer, a series of CPNs with different particle sizes are successfully prepared via a nanoprecipitation approach. Results show that the NIR-II fluorescence brightness of CPNs gradually amplifies with decreasing particle size, and the optimal CPNs, NP0.2, demonstrate up to a 2.05-fold fluorescence enhancement compared with the counterpart nanoparticles. With the merits of reliable biocompatibility, high photostability, and efficient light-heat conversion, the optimal NP0.2 has been successfully employed for NIR-II FI-guided photothermal therapy both in vitro and in vivo. Our work highlights an effective strategy of nanoengineering to improve the NIR-II performance of CPNs, advancing the development of NIR-II FI in life sciences.

Multiplexed Short-wave Infrared Imaging Highlights Anatomical Structures in Mice

While multiplexed fluorescence imaging is frequently used for in vitro microscopy, extending the technique to whole animal imaging in vivo has remained challenging due to the attenuation and scattering of visible and traditional near infrared (NIR-I) wavelengths. Fluorescence imaging using short-wave infrared (SWIR, 1000 - 1700 nm, a.k.a. NIR-II) light enables deeper tissue penetration for preclinical imaging compared to previous methods due to reduced tissue scattering and minimal background autofluorescence in this optical window. Combining NIR-I excitation wavelengths with multiple distinct SWIR emission peaks presents a tremendous opportunity to distinguish multiple fluorophores with high precision for non-invasive, multiplexed anatomical imaging in small animal models. SWIR-emitting semiconductor quantum dots (QDs) with tunable emission peaks and optical stability have emerged as powerful contrast agents, but SWIR imaging demonstrations have yet to move beyond two-color imaging schemes. In this study, we engineered a set of three high quantum yield lead sulfide/cadmium sulfide (PbS/CdS) core/shell QDs with distinct SWIR emissions ranging from 1100 - 1550 nm and utilize these for simultaneous three-color imaging in mice. We first use QDs to non-invasively track lymphatic drainage, highlighting the detailed network of lymphatic vessels with high-resolution with a widefield imaging over a 2 hr period. We then perform multiplexed imaging with all three QDs to distinctly visualize the lymphatic system and spatially overlapping vasculature network. This work establishes optimized SWIR QDs for next-generation multiplexed preclinical imaging, moving beyond the capability of previous dual-labeling techniques. The capacity to discriminate several fluorescent labels through non-invasive NIR-I excitation and SWIR detection unlocks numerous opportunities for studies of disease progression, drug biodistribution, and cell trafficking dynamics in living organisms.

A selenium-based NIR-II photosensitizer for a highly effective and safe phototherapy plan

High efficiency, stability, long emission wavelength (NIR-II), and good biocompatibility are crucial for photosensitizers in phototherapy. However, current Food and Drug Administration (FDA)-approved organic fluorophores exhibit poor chemical stability and photostability as well as short emission wavelength, limiting their clinical usage. To address this, we developed Se-IR1100, a novel organic photosensitizer with a photostable and thermostable benzobisthiadiazole (BBTD) backbone. By incorporating selenium as a heavy atom and constructing a D-A-D structure, Se-IR1100 exhibits a maximum fluorescence emission wavelength of 1100 nm. Compared with FDA-approved indocyanine green (ICG), DSPE-PEGylated Se-IR1100 nanoparticles exhibit prominent photostability and long-lasting photothermal effects. Upon 808 nm laser irradiation, Se-IR1100 NPs efficiently convert light energy into heat and reactive oxygen species (ROS), inducing cancer cell death in cellular studies and living organisms while maintaining biocompatibility. With salient photostability and a photothermal conversion rate of 55.37%, Se-IR1100 NPs hold promise as a superior photosensitizer for diagnostic and therapeutic agents in oncology. Overall, we have designed and optimized a multifunctional photosensitizer Se-IR1100 with good biocompatibility that performs NIR-II fluorescence imaging and phototherapy. This dual-strategy method may offer novel approaches for the development of multifunctional probes using dual-strategy or even multi-strategy methods in bioimaging, disease diagnosis, and therapy.

Nanocrystals for Deep-Tissue In Vivo Luminescence Imaging in the Near-Infrared Region

In vivo imaging technologies have emerged as a powerful tool for both fundamental research and clinical practice. In particular, luminescence imaging in the tissue-transparent near-infrared (NIR, 700-1700 nm) region offers tremendous potential for visualizing biological architectures and pathophysiological events in living subjects with deep tissue penetration and high imaging contrast owing to the reduced light-tissue interactions of absorption, scattering, and autofluorescence. The distinctive quantum effects of nanocrystals have been harnessed to achieve exceptional photophysical properties, establishing them as a promising category of luminescent probes. In this comprehensive review, the interactions between light and biological tissues, as well as the advantages of NIR light for in vivo luminescence imaging, are initially elaborated. Subsequently, we focus on achieving deep tissue penetration and improved imaging contrast by optimizing the performance of nanocrystal fluorophores. The ingenious design strategies of NIR nanocrystal probes are discussed, along with their respective biomedical applications in versatile in vivo luminescence imaging modalities. Finally, thought-provoking reflections on the challenges and prospects for future clinical translation of nanocrystal-based in vivo luminescence imaging in the NIR region are wisely provided.

In Vivo High-Contrast Biomedical Imaging in the Second Near-Infrared Window Using Ultrabright Rare-Earth Nanoparticles

Intravital luminescence imaging in the second near-infrared window (NIR-II) enables noninvasive deep-tissue imaging with high spatiotemporal resolution of live mammals because of the properties of suppressed light scattering and diminished autofluorescence in the long-wavelength region. Herein, we present the synthesis of a downconversion luminescence rare-earth nanocrystal with a core-shell-shell structure (NaYF4@NaYbF4:Er,Ce@NaYF4:Ca). The structure efficiently maximized the doping concentration of the sensitizers and increased Er3+ luminescence while preventing cross relaxation. Furthermore, Ce3+ doping in the middle layer efficiently limited the upconversion pathway and increased downconversion by 24-fold to produce bright 1550 nm luminescence under 975 nm excitation. Finally, optimizing the inert shell coating of NaYF4:Ca and liposome encapsulation reduced the luminescence quenching impact by water and improved biological metabolism. Thus, our synthesized biocompatible, ultrabright NIR-II probes provide high contrast and resolution for through-scalp and through-skull luminescence imaging of mice cerebral vasculature without craniotomy as well as imaging of mouse hindlimb microvessels.

Advancing Near-Infrared Light Sources: Enhancing Chromium Emission through Cation Substitution in Ultra-Broadband Near-Infrared Phosphors

The growing interest in the use of near-infrared (NIR) radiation for spectroscopy, optical communication, and medical applications spanning both NIR-I (700-900 nm) and NIR-II (900-1700 nm) has driven the need for new NIR light sources. NIR phosphor-converted light-emitting diodes (pc-LEDs) are expected to replace traditional lamps mainly due to their high efficiency and compact design. Broadband NIR phosphors activated by Cr3+ and Cr4+ have attracted significant research interest, offering emission across a wide range from 700 to 1700 nm. In this work, we synthesized a series of Sc2(1-x)Ga2xO3:Cr3+/4+ materials (x = 0-0.2) with broadband NIR-I (Cr3+) and NIR-II (Cr4+) emission. We observed a substantial increase in the intensity of Cr3+ (approximately 77 times) by incorporating Ga3+ ions. Additionally, our investigation revealed that energy transfer occurred between Cr3+ and Cr4+ ions. Configuration diagrams are presented to elucidate the behavior of Cr3+ and Cr4+ ions within the Sc2O3 matrix. We also observed a phase transition at a pressure of 20.2 GPa, resulting in a new unknown phase where Cr3+ luminescence exhibited a high-symmetry environment. Notably, this study presents the pressure-induced shift of NIR Cr4+ luminescence in Sc2(1-x)Ga2xO3:Cr3+/4+. The linear shifts were estimated at 83 ± 3 and 61 ± 6 cm-1/GPa before and after the phase transition. Overall, our findings shed light on the synthesis, luminescent properties, temperature, and high-pressure behavior within the Sc2(1-x)Ga2xO3:Cr3+/4+ materials. This research contributes to the understanding and potential applications of these materials in the development of efficient NIR light sources and other optical devices.

Ion-induced bias in Ag2S luminescent nanothermometers

Luminescence nanothermometry allows measuring temperature remotely and in a minimally invasive way by using the luminescence signal provided by nanosized materials. This technology has allowed, for example, the determination of intracellular temperature and in vivo monitoring of thermal processes in animal models. However, in the biomedical context, this sensing technology is crippled by the presence of bias (cross-sensitivity) that reduces the reliability of the thermal readout. Bias occurs when the impact of environmental conditions different from temperature also modifies the luminescence of the nanothermometers. Several sources that cause loss of reliability have been identified, mostly related to spectral distortions due to interaction between photons and biological tissues. In this work, we unveil an unexpected source of bias induced by metal ions. Specifically, we demonstrate that the reliability of Ag2S nanothermometers is compromised during the monitoring of photothermal processes produced by iron oxide nanoparticles. The observed bias occurs due to the heat-induced release of iron ions, which interact with the surface of the Ag2S nanothermometers, enhancing their emission. The results herein reported raise a warning to the community working on luminescence nanothermometry, since they reveal that the possible sources of bias in complex biological environments, rich in molecules and ions, are more numerous than previously expected.

Interface-Mediation-Enabled High-Performance Near-Infrared AgAuSe Quantum Dot Light-Emitting Diodes

Near-infrared (NIR) quantum dot (QD) light-emitting diodes (LEDs) (NIR-QLEDs) for recognition and tracking applications underpin the future of night-vision technology. However, the performance of environmentally benign materials and devices has lagged far behind that of their Pb-containing counterparts. In this study, we demonstrate the superior performance of NIR-QLEDs based on efficient AgAuSe QDs with contact interface mediation. Consequently, we reveal that using cysteamine-treated QD film contact heterointerfaces can effectively eliminate contact defects in devices and preserve their excellent emissive properties. Additionally, the dipole moment orientation of the coordinated additives is inverse of the heterojunction potential difference, simultaneously blocking electrons and enhancing hole injection in operando, optimizing the LED charge injection balance. These devices exhibit a high external quantum efficiency (EQE) and a power conversion efficiency (PCE) of 15.8 and 12.7% at 1046 nm, respectively, a sub-band gap turn-on voltage of 0.9 V, and a low current density (over 10% of the EQE from 0.0017 to 0.31 mA cm-2). These are the highest EQE and PCE values ever reported for environmentally benign NIR-QLEDs. The results of this study can provide a general strategy for the practical application of QDs in electroluminescent devices.

Novel NIR-II fluorescent probes for biliary atresia imaging

Biliary atresia is a rare infant disease that predisposes patients to liver transplantation and death if not treated in time. However, early diagnosis is challenging because the clinical manifestations and laboratory tests of biliary atresia overlap with other cholestatic diseases. Therefore, it is very important to develop a simple, safe and reliable method for the early diagnosis of biliary atresia. Herein, a novel NIR-II fluorescence probe, HZL2, with high quantum yield, excellent biocompatibility, low cytotoxicity and rapid excretion through the liver and gallbladder was developed based on the oil/water partition coefficient and permeability. A simple fecal sample after injection of HZL2 can be used to efficiently identify the success of the mouse model of biliary atresia for the first time, allowing for an early diagnosis of the disease. This study not only developed a simple and safe method for the early diagnosis of biliary atresia with great potential in clinical translation but also provides a research tool for the development of pathogenesis and therapeutic medicines for biliary atresia.

Advancement of Near Infrared-II Organic Dyes in Bioimaging

In recent decades, small organic compounds having absorption and fluorescence emission in the second near-infrared (NIR-II, 1000-1700 nm) bio-window have attracted a lot of interest. Fluorescence bioimaging may be used by researchers and surgeons to genomically focus an array of biological areas and functions. The near-infrared-II (NIR-II) dye which has fluorescent imaging, bypasses the visible imaging striking barrier, making it a valuable tool for cancer early detection and very sensitive tumor resection. It can generate sub-cellular density scanning data directly and has been applied to biological and medical detection and therapy. This paper discusses the history and current state of theranostics and biosensing uses of NIR-II tiny organic producers depending on multiple skeletons. For biological imaging, organic dyes are extensively used as markers for near-infrared (NIR) fluorescent though the issue lies in instability and hydrophobicity for bio environment which is a major restriction for its utilization. Various conjugation with the probes is also adopted in order to increase the biosensing power and efficiency and to deduct their level of cytotoxicity. Some of these combinations are discussed in the paper including supramolecule usage, combining the probes with quantum dots, and an alloy of gold selenium. NIR-II fluorescence devices are also used in combination with confocal microscopy to study the cytological interaction of proteins. Several research papers stated using cell membrane enhancement units empowered with oxazolepyridine and coumarin compounds. As the need for bioimaging increases decade by decade these cons of using organic dyes alone are getting overlapped by compounding these dyes with materials that help in better penetration, bioavailability, and reduction in areas of toxicity.

Space and Bond Synergistic Conjugation Controlling Multiple-Aniline NIR-II Absorption for Photoacoustic Imaging Guided Photothermal Therapy

Currently, clinical photothermal therapy (PTT) is greatly limited by the poor tissue penetration of the excitation light sources in visible (390-780 nm) and first near-infrared (NIR-I, 780-900 nm) window. Herein, based on space and bond synergistic conjugation, a multiple-aniline organic small molecule (TPD), is synthesized for high-efficiency second near-infrared (NIR-II, 900-1700 nm) photoacoustic imaging guided PTT. With the heterogeneity of six nitrogen atoms in TPD, the lone electrons on the nitrogen atom and the π bond orbital on the benzene ring form multielectron conjugations with highly delocalized state, which endowed TPD with strong NIR-II absorption (maximum peak at 925 nm). Besides, according to the single molecular reorganization, the alkyl side chains on TPD make more free space for intramolecular motion to enhance the photothermal conversion ability. Forming TPD nanoparticles (NPs) in J-aggregation, they show a further bathochromic-shifted absorbance (maximum peak at 976 nm) as well as a high photothermal conversion efficiency (66.7%) under NIR-II laser irradiation. In vitro and in vivo experiments demonstrate that TPD NPs can effectively inhibit the growth of tumors without palpable side effects. The study provides a novel NIR-II multiple-aniline structure based on multielectron hyperconjugation, and opens a new design thought for photothermal agents.

Design and Synthesis of CdHgSe/HgS/CdZnS Core/Multi-Shell Quantum Dots Exhibiting High-Quantum-Yield Tissue-Penetrating Shortwave Infrared Luminescence

Cdx Hg1- x Se/HgS/Cdy Zn1- y S core/multi-shell quantum dots (QDs) exhibiting bright tissue-penetrating shortwave infrared (SWIR; 1000-1700 nm) photoluminescence (PL) are engineered. The new structure consists of a quasi-type-II Cdx Hg1- x Se/HgS core/inner shell domain creating luminescent bandgap tunable across SWIR window and a wide-bandgap Cdy Zn1- y S outer shell boosting the PL quantum yield (QY). This compositional sequence also facilitates uniform and coherent shell growth by minimizing interfacial lattice mismatches, resulting in high QYs in both organic (40-80%) and aqueous (20-70%) solvents with maximum QYs of 87 and 73%, respectively, which are comparable to those of brightest visible-to-near infrared QDs. Moreover, they maintain bright PL in a photocurable resin (QY 40%, peak wavelength ≈ 1300 nm), enabling the fabrication of SWIR-luminescent composites of diverse morphology and concentration. These composites are used to localize controlled amounts of SWIR QDs inside artificial (Intralipid) and porcine tissues and quantitatively evaluate the applicability as luminescent probes for deep-tissue imaging.

Oligomerization Strategy of D-A-Type Conjugated Molecules for Improved NIR-II Fluorescence Imaging

Fluorescence imaging (FI) in the second near-infrared (NIR-II) window has emerged as a promising imaging method for cancer diagnosis because of its superior properties such as deep penetration depth and high signal-to-background ratio. Despite the superiorities of organic conjugated nanomaterials for NIR-II FI, the issues of low fluorescence quantum yield, weak metabolic capability, undefined molecular structure for conjugated polymers, weak light-harvesting ability, short emission wavelength, and high synthetic complexity for conjugated small molecules still remain to be concerned. We herein propose an oligomerization strategy by facilely adjusting the oligomerization time to balance the advantages and disadvantages between conjugated polymers and small molecules, obtaining the candidate (CO1, oligomerization time: 1 min) with the optimal NIR-II optical performance. Then the CO1 is further prepared into water-dispersed nanoparticles (CON1) via a nanoprecipitation approach. By virtue of the suitable size, excellent NIR-II optical properties, low toxicity, and strong cell-labeling ability, the CON1 is successfully employed for in vivo NIR-II imaging, permitting the real-time visualization of blood vascular system and tumors with high sensitivity and resolution. This work thus not only provides a personalized organic conjugated nano-agent for NIR-II FI, but also highlights the molecular strategy for the development of organic conjugated systems with optimal performance for bio-imaging.

Revealing the role of nitroxyl during hepatic ischemia-reperfusion injury with a NIR-II luminescent nanoprobe

Hepatic ischemia-reperfusion injury (HIRI) can severely impair liver function and has a potential relationship with reactive nitrogen species. Nitroxyl (HNO) has been discovered to be involved in some biological functions and pharmacological activities. However, till now, there has been no knowledge of the role of HNO in the HIRI process, mainly because accurately tracking its fluctuation at the molecular level in vivo is extremely difficult. Herein, we developed a responsive ratiometric near-infrared-II (NIR-II) nanoprobe with rare earth ions-doped nanoparticles (RENPs) as the luminophore and a molecular trigger that can specifically react with HNO to regulate the NIR-II emission of RENPs. With this nanoprobe, we revealed the relationship between HNO and the HIRI process and demonstrated that HNO may be a product of stress reactions during HIRI. This work not only creates a useful tool for visually tracking HNO in vivo but also provides first-hand information about its role in HIRI.

Broadband Short-Wave Infrared-Emitting MgGa2O4:Cr3+, Ni2+ Phosphor with Near-Unity Internal Quantum Efficiency and High Thermal Stability for Light-Emitting Diode Applications

Blue InGaN chip-pumped short-wave infrared (SWIR) emitters have aroused tremendous attention and shown emerging applications in diverse fields such as healthcare, retail, and agriculture. However, discovering blue light-emitting diode (LED)-pumped SWIR phosphors with a central emission wavelength over 1000 nm remains a significant challenge. Herein, we demonstrate the efficient broadband SWIR luminescence of Ni²⁺ by simultaneously incorporating Cr³⁺ and Ni²⁺ ions into the MgGa₂O₄ lattice, with Cr³⁺ as the sensitizer and Ni²⁺ as the emitter. Because of the strong blue light absorption of Cr³⁺ and high energy transfer efficiency to Ni²⁺, the obtained MgGa₂O₄:Cr³⁺, Ni²⁺ phosphors show intense SWIR luminescence with a peak wavelength at 1260 nm and a full width at half maximum (FWHM) of 222 nm under the excitation of blue light. The optimized SWIR phosphor presents an ultra-high SWIR photoluminescence quantum efficiency of 96.5% and outstanding luminescence thermal stability (67.9%@150 °C). A SWIR light source has been fabricated through a combination of the prepared MgGa₂O₄:Cr³⁺, Ni²⁺ phosphor and a commercial 450 nm blue LED chip, delivering a maximum SWIR radiant power of 14.9 mW at 150 mA input current. This work not only demonstrates the feasibility of developing broadband high-power SWIR emitters using converter technology but also presents new insights into the importance of SWIR technology.

A novel strategy to construct activatable silver chalcogenide quantum dots nanoprobe for NIR-Ⅱ fluorescence imaging of hypochlorous acid in vivo

It is necessary to develop sensitive and selective probes for real-time in vivo monitoring of hypochlorous acid (HClO) which plays a significant role in physiological and pathological processes. The second near-infrared (NIR-Ⅱ) luminescent silver chalcogenide quantum dots (QDs) have shown great potential in developing activatable nanoprobe for HClO in terms of their outstanding imaging performance in the living organism. However, the limited strategy for the construction of activatable nanoprobes severely restricts their widespread applications. Herein, we proposed a novel strategy for developing an activatable silver chalcogenide QDs nanoprobe for NIR-Ⅱ fluorescence imaging of HClO in vivo. The nanoprobe was fabricated by mixing an Au-precursor solution with Ag₂Te@Ag₂S QDs to allow cation exchange and release Ag ions and then reducing the released Ag ions on the QDs surface to form an Ag shell for quenching of the emission of QDs. The Ag shell of QDs was oxidized and etched in the presence of HClO, resulting in the disappearance of their quenching effect on QDs and the activation of the QDs emission. The developed nanoprobe enabled highly sensitive and selective determination of HClO and imaging of HClO in arthritis and peritonitis. This study provides a novel strategy for the construction of activatable nanoprobe based on QDs and a promising tool for NIR-Ⅱ imaging of HClO in vivo.

Anti-Quenching NIR-II J-Aggregates of Benzo[c]thiophene Fluorophore for Highly Efficient Bioimaging and Phototheranostics

Molecular fluorophores with the second near-infrared (NIR-II) emission hold great potential for deep-tissue bioimaging owing to their excellent biocompatibility and high resolution. Recently, J-aggregates are used to construct long-wavelength NIR-II emitters as their optical bands show remarkable red shifts upon forming water-dispersible nano-aggregates. However, their wide applications in the NIR-II fluorescence imaging are impeded by the limited varieties of J-type backbone and serious fluorescence quenching. Herein, a bright benzo[c]thiophene (BT) J-aggregate fluorophore (BT6) with anti-quenching effect is reported for highly efficient NIR-II bioimaging and phototheranostics. The BT fluorophores are manipulated to have Stokes shift over 400 nm and aggregation-induced emission (AIE) property for conquering the self-quenching issue of the J-type fluorophores. Upon forming BT6 assemblies in an aqueous environment, the absorption over 800 nm and NIR-II emission over 1000 nm are boosted for more than 41 and 26 folds, respectively. In vivo visualization of the whole-body blood vessel and imaging-guided phototherapy results verify that BT6 NPs are excellent agent for NIR-II fluorescence imaging and cancer phototheranostics. This work develops a strategy to construct bright NIR-II J-aggregates with precisely manipulated anti-quenching properties for highly efficient biomedical applications.

Kinetically and thermodynamically controlled one-pot growth of gold nanoshells with NIR-II absorption for multimodal imaging-guided photothermal therapy

Since the successful clinical trial of AuroShell for photothermal therapy, there is currently intense interest in developing gold-based core-shell structures with near-infrared (NIR) absorption ranging from NIR-I (650-900 nm) to NIR-II (900-1700 nm). Here, we propose a seed-mediated successive growth approach to produce gold nanoshells on the surface of the nanoscale metal-organic framework (NMOF) of UiO-66-NH₂ (UiO = the University of Oslo) in one pot. The key to this strategy is to modulate the proportion of the formaldehyde (reductant) and its regulator / oxidative product of formic acid to harness the particle nucleation and growth rate within the same system. The gold nanoshells propagate through a well-oriented and controllable diffusion growth pattern (points → facets → octahedron), which has not been identified. Most strikingly, the gold nanoshells prepared hereby exhibit an exceedingly broad and strong absorption in NIR-II with a peak beyond 1300 nm and outstanding photothermal conversion efficiency of 74.0%. Owing to such superior performance, these gold nanoshells show promising outcomes in photoacoustic (PA), computed tomography (CT), and photothermal imaging-guided photothermal therapy (PTT) for breast cancer, as demonstrated both in vitro and in vivo.

Single-Atom Gadolinium Nano-Contrast Agents with High Stability for Tumor T1 Magnetic Resonance Imaging

Gadolinium chelates for tumor magnetic resonance imaging (MRI) face challenges such as inadequate sensitivity, lack of selectivity, and risk of Gd leakage. This study presents a single-atom Gd nano-contrast agent (Gd-SA) that enhances tumor MRI. Isolated Gd atoms coordinated by six N atoms and two O atoms are atomically dispersed on a hollow carbon nanosphere, allowing the maximum utilization of Gd atoms with reduced risk of toxic Gd ion leakage. Owning to the large surface area and fast exchange of relaxed water molecules, Gd-SA shows excellent T₁-weighted magnetic resonance enhancement with a r₁ value of 11.05 mM^-1 s^-1 at 7 T, which is 3.6 times that of the commercial gadolinium-diethylenetriamine pentaacetic acid (Gd-DTPA). In vivo MRI results show that the Gd-SA has a higher spatial resolution and a wider imaging time window for tumors than Gd-DTPA, with low hematological, hepatic, and nephric toxicities. These advantages demonstrate the great potential of single-atom Gd-based nanomaterials as safe, efficient, and long-term MRI contrast agents for cancer diagnosis.

Assembling AgAuSe Quantum Dots with Peptidoglycan and Neutrophils to Realize Enhanced Tumor Targeting, NIR (II) Imaging, and Sonodynamic Therapy

Significant progress is made in drug delivery systems, but they still face problems such as poor stability in vivo, off-target drugs, and difficulty in crossing biological barriers. It is urgent to realize efficient targeted delivery and precisely controlled sustained release of drugs by using the integrated nanoplatform. Theranostic nanoplatform is a new biomedical technology that combines diagnosis or monitoring of diseases with treatment. Here, an integrated strategy of diagnosis and treatment is reported for delivering NIR-II imaged and therapeutic AgAuSe quantum dots (QDs) carried by peptidoglycan multilayer networks of bacteria to hitchhike circulating neutrophils for targeting the tumor. The assembled nanomaterials have good stability, which can not only initiate endogenous cells for drug delivery and achieve efficient targeting, but also guide drug imaging with excellent fluorescence property. Meanwhile, the elimination of established solid tumor is achieved with the administration of sonodynamic therapy without recurrence. This drug system expands the application of endogenous cell to participate in drug delivery system. Thus, the assembly strategy demonstrates the potential of endogenous neutrophils in functioning as natural drug vehicles and the application of NIR-II fluorescent QDs in biomedical engineering.

Optical Properties of Conical Quantum Dot: Exciton-Related Raman Scattering, Interband Absorption and Photoluminescence

The current work used the effective mass approximation conjoined with the finite element method to study the exciton states in a conical GaAs quantum dot. In particular, the dependence of the exciton energy on the geometrical parameters of a conical quantum dot has been studied. Once the one-particle eigenvalue equations have been solved, both for electrons and holes, the available information on energies and wave functions is used as input to calculate exciton energy and the effective band gap of the system. The lifetime of an exciton in a conical quantum dot has been estimated and shown to be in the range of nanoseconds. In addition, exciton-related Raman scattering, interband light absorption and photoluminescence in conical GaAs quantum dots have been calculated. It has been shown that with a decrease in the size of the quantum dot, the absorption peak has a blue shift, which is more pronounced for quantum dots of smaller sizes. Furthermore, the interband optical absorption and photoluminescence spectra have been revealed for different sizes of GaAs quantum dot.

Single Atom-Engineered NIR-II Gold Clusters with Ultrahigh Brightness and Stability for Acute Kidney Injury

Near-infrared-II (NIR-II) imaging has shown great potential for monitoring the pathological progression and deep tissue imaging but is limited to present unmet NIR-II agent. Present fluorophores show a promising prospect for NIR-II imaging, but brightness and photostability are still highly challenging during real-time monitoring. In this work, atom-engineered NIR-II Au₂₄ Cd₁  clusters with ultrahigh brightness, stability, and photostability are developed via single atomic Cd doping. Single atom Cd substitutions contribute to Cd 4d state in HOMO and redistribution of energy level near the gap, exhibiting 56-fold fluorescence enhancement of Au₂₄ Cd₁  clusters. Meanwhile, single atomic Cd reinforces CdAu bond energy, formation energy, and stabilized cluster structure, leading to persistent stability for up to 1 month without decay, as well as excellent photostability of 1 h without photobleaching, much longer than clinically approved indocyanine green (<5 min). In vivo imaging shows gold clusters can monitor acute kidney injury (AKI) even after 72 h of injury, enabling evaluating progression at a very long window. Meanwhile, the bioactive gold clusters can alleviate AKI-induced oxidative stress damage and acute neuroinflammation. Single atom-engineered gold clusters exhibit molecular tracking and diagnostic prospect in kidney-related diseases.

Recent Progress in NIR-II Fluorescence Imaging-guided Drug Delivery for Cancer Theranostics

Fluorescence imaging in the second near-infrared window (NIR-II) has become a prevalent choice owing to its appealing advantages like deep penetration depth, low autofluorescence, decent spatiotemporal resolution, and a high signal-to-background ratio. This would expedite the innovation of NIR-II imaging-guided drug delivery (IGDD) paradigms for the improvement of the prognosis of patients with tumors. This work systematically reviews the recent progress of such NIR-II IGDD-mediated cancer therapeutics and collectively brings its essence to the readers. Special care has been taken to assess their performances based on their design approach, such as enhancing their drug loading and triggering release, designing intrinsic and extrinsic fluorophores, and/ or overcoming biological barriers. Besides, the state-of-the-art NIR-II IGDD platforms for different therapies like chemo-, photodynamic, photothermal, chemodynamic, immuno-, ion channel, gas-therapies, and multiple functions such as stimulus-responsive imaging and therapy, and monitoring of drug release and therapeutic response, have been updated. In addition, for boosting theranostic outcomes and clinical translation, the innovation directions of NIR-II IGDD platforms are summarized, including renal-clearable, biodegradable, sub-cellular targeting, and/or afterglow, chemiluminescence, X-ray excitable NIR-IGDD, and even cell therapy. This review will propel new directions for safe and efficient NIR-II fluorescence-mediated anticancer drug delivery.

Second Near-Infrared (NIR-II) Window for Imaging-Navigated Modulation of Brain Structure and Function

For a long time, optical imaging of the deep brain with high resolution has been a challenge. Recently, with the advance in second near-infrared (NIR-II) bioimaging techniques and imaging contrast agents, NIR-II window bioimaging has attracted great attention to monitoring deeper biological or pathophysiological processes with high signal-to-noise ratio (SNR) and spatiotemporal resolution. Assisted with NIR-II bioimaging, the modulation of structure and function of brain is promising to be noninvasive and more precise. Herein, in this review, first the advantage of NIR-II light in brain imaging from the interaction between NIR-II and tissue is elaborated. Then, several specific NIR-II bioimaging technologies are introduced, including NIR-II fluorescence imaging, multiphoton fluorescence imaging, and photoacoustic imaging. Furthermore, the corresponding contrast agents are summarized. Next, the application of various NIR-II bioimaging technologies in visualizing the characteristics of cerebrovascular network and monitoring the changes of the pathology signals will be presented. After that, the modulation of brain structure and function based on NIR-II bioimaging will be discussed, including treatment of glioblastoma, guidance of cell transplantation, and neuromodulation. In the end, future perspectives that would help improve the clinical translation of NIR-II light are proposed.

Anisotropic Heavy-Metal-Free Semiconductor Nanocrystals: Synthesis, Properties, and Applications

Heavy-metal (Cd, Hg, and Pb)-containing semiconductor nanocrystals (NCs) have been explored widely due to their unique optical and electrical properties. However, the toxicity risks of heavy metals can be a drawback of heavy-metal-containing NCs in some applications. Anisotropic heavy-metal-free semiconductor NCs are desirable replacements and can be realized following the establishment of anisotropic growth mechanisms. These anisotropic heavy-metal-free semiconductor NCs can possess lower toxicity risks, while still exhibiting unique optical and electrical properties originating from both the morphological and compositional anisotropy. As a result, they are promising light-emitting materials in use various applications. In this review, we provide an overview on the syntheses, properties, and applications of anisotropic heavy-metal-free semiconductor NCs. In the first section, we discuss hazards of heavy metals and introduce the typical heavy-metal-containing and heavy-metal-free NCs. In the next section, we discuss anisotropic growth mechanisms, including solution-liquid-solid (SLS), oriented attachment, ripening, templated-assisted growth, and others. We discuss mechanisms leading both to morphological anisotropy and to compositional anisotropy. Examples of morphological anisotropy include growth of nanorods (NRs)/nanowires (NWs), nanotubes, nanoplatelets (NPLs)/nanosheets, nanocubes, and branched structures. Examples of compositional anisotropy, including heterostructures and core/shell structures, are summarized. Third, we provide insights into the properties of anisotropic heavy-metal-free NCs including optical polarization, fast electron transfer, localized surface plasmon resonances (LSPR), and so on, which originate from the NCs' anisotropic morphologies and compositions. Finally, we summarize some applications of anisotropic heavy-metal-free NCs including catalysis, solar cells, photodetectors, lighting-emitting diodes (LEDs), and biological applications. Despite the huge progress on the syntheses and applications of anisotropic heavy-metal-free NCs, some issues still exist in the novel anisotropic heavy-metal-free NCs and the corresponding energy conversion applications. Therefore, we also discuss the challenges of this field and provide possible solutions to tackle these challenges in the future.

Multiscale NIR-II Imaging-Guided Brain-Targeted Drug Delivery Using Engineered Cell Membrane Nanoformulation for Alzheimer's Disease Therapy

Effective drug delivery in the central nervous system (CNS) needs to have long blood-circulation half-lives, to pass through the blood-brain barrier (BBB), and subsequently to be taken up by target cells. Herein, a traceable CNS delivery nanoformulation (RVG-NV-NPs) is developed by encapsulating bexarotene (Bex) and AgAuSe quantum dots (QDs) within Lamp2b-RVG-overexpressed neural stem cell (NSC) membranes. The high-fidelity near-infrared-II imaging by AgAuSe QDs offers a possibility of in vivo monitoring the multiscale delivery process of the nanoformulation from the whole-body to the single-cell scale. It was revealed the synergy of acetylcholine receptor-targeting of RVG and the natural brain-homing and low immunogenicity of NSC membranes prolong the blood circulation, facilitate BBB crossing and nerve cell targeting of RVG-NV-NPs. Thus, in Alzheimer's disease (AD) mice, the intravenous delivery of as low as 0.5% of oral dose Bex showed highly effective up-regulation of the apolipoprotein E expression, resulting rapid alleviation of ∼40% β-amyloid (Aβ) level in the brain interstitial fluid after a single dose administration. The pathological progression of Aβ in AD mice is completely suppressed during a 1 month treatment, thus effectively protecting neurons from Aβ-induced apoptosis and maintaining the cognitive abilities of AD mice.

Activatable Lanthanide Nanoprobes with Dye-Sensitized Second Near-Infrared Luminescence for in Vivo Inflammation Imaging

Lanthanide nanoparticles exhibit unique photophysical properties and thus emerge as promising second near-infrared (NIR-II) optical agents. However, the limited luminescence brightness hampers their construction of activatable NIR-II probes. Herein, we report the synthesis of dye-sensitized lanthanide nanoprobes (NaGdF₄:Nd/ICG; indocyanine green (ICG)) and their further development for in vivo activatable imaging of hypochlorite (ClO^-). Dye sensitization using ICG not only shifts the optimal doping concentration of Nd³⁺ from 5 to 20 mol % but also leads to a 5-fold NIR-II enhancement relative to the ICG-free counterpart. Mechanistic studies reveal that such a luminescence enhancement of NaGdF₄:Nd at high Nd³⁺ concentration is ascribed to an alleviated cross-relaxation effect due to the broad absorption of ICG and faster energy transfer process. Taking advantage of dye oxidation, the nanoprobes enable activatable NIR-II imaging of hypochlorous acid (ClO^-) in a drug-induced lymphatic inflammation mouse model. This work thus provides a simple, yet effective luminescence enhancement strategy for constructing lanthanide nanoprobes at higher activator doping concentration toward activatable NIR-II molecular imaging.

Machine Learning System To Monitor Hg2+ and Sulfide Using a Polychromatic Fluorescence-Colorimetric Paper Sensor

An optical monitoring device combining a smartphone with a polychromatic ratiometric fluorescence-colorimetric paper sensor was developed to detect Hg2+ and S2- in water and seafood. This monitoring included the detection of food deterioration and was made possible by processing the sensing data with a machine learning algorithm. The polychromatic fluorescence sensor was composed of blue fluorescent carbon quantum dots (CDs) (BU-CDs) and green and red fluorescent CdZnTe quantum dots (QDs) (named GN-QDs and RD-QDs, respectively). The experimental results and density functional theory (DFT) prove that the incorporation of Zn can improve the stability and quantum yield of CdZnTe QDs. According to the dynamic and static quenching mechanisms, GN-QDs and RD-QDs were quenched by Hg2+ and sulfide, respectively, but BU-CDs were not sensitive to them. The system colors change from green to red to blue as the concentration of the two detectors rises, and the limits of detection (LOD) were 0.002 and 1.488 μM, respectively. Meanwhile, the probe was combined with the hydrogel to construct a visual sensing intelligent test strip, which realized the monitoring of food freshness. In addition, a smartphone device assisted by multiple machine learning methods was used to text Hg2+ and sulfide in real samples. It can be concluded that the fabulous stability, sensitivity, and practicality exhibited by this sensing mechanism give it unlimited potential for assessing the contents of toxic and hazardous substances Hg2+ and sulfide.

Cation Exchange Synthesis of Aliovalent Doped InP QDs and Their ZnSexS1-x Shell Coating for Enhanced Fluorescence Properties

III-V quantum dots (QDs), in particular InP QDs, have emerged as high-performance and environmentally friendly candidates to replace cadmium based QDs. InP QDs exhibit properties of direct band gap structure, low toxicity, and high mobility, which make them suitable for high-performance optoelectronic applications. However, it is still challenging to precisely regulate the components and crystal structure of InP QDs, especially in the engineered stable aliovalent doping. In this work, we developed our original reverse cation exchange strategy to achieve Cu⁺ doped InP (InP:Cu) QDs at lower temperature. A ZnSe_xS_1-x shell was then homogeneously grown on the InP:Cu QDs as the passivation shell. The as-prepared InP:Cu@ZnSe_xS_1-x core-shell QDs exhibited better fluorescence properties with a photoluminescence quantum yield (PLQY) of 56.47%. Due to the existence of multiple luminous centers in the QDs, variable temperature-dependent fluorescence characteristics have been studied. The high photoluminescence characteristics in the near-infrared region indicate their potential applications in optoelectronic devices and biological fields.

Recent progress of second near-infrared (NIR-II) fluorescence microscopy in bioimaging

Visualizing biological tissues in vivo at a cellular or subcellular resolution to explore molecular signaling and cell behaviors is a crucial direction for research into biological processes. In vivo imaging can provide quantitative and dynamic visualization/mapping in biology and immunology. New microscopy techniques combined with near-infrared region fluorophores provide additional avenues for further progress in vivo bioimaging. Based on the development of chemical materials and physical optoelectronics, new NIR-II microscopy techniques are emerging, such as confocal and multiphoton microscopy, light-sheet fluorescence microscopy (LSFM), and wide-field microscopy. In this review, we introduce the characteristics of in vivo imaging using NIR-II fluorescence microscopy. We also cover the recent advances in NIR-II fluorescence microscopy techniques in bioimaging and the potential for overcoming current challenges.

Confocal Laser Scanning Microscopy Based on a Silicon Photomultiplier for Multicolor In Vivo Imaging in Near-Infrared Regions I and II

Confocal laser scanning microscopy (CLSM) is expected to exhibit a better imaging performance in the second near-infrared (NIR-II) windows with weak tissue scattering and autofluorescence. However, the indium gallium arsenide (InGaAs) detectors currently used for imaging in the NIR-II region are prohibitively expensive, hampering its extensive biomedical applications. In this study, a novel NIR-II CLSM system is developed by using the inexpensive silicon photomultiplier (SiPM) that can perform the multicolor biological imaging in vivo. Using IR-780 iodide as the contrast agent, the NIR-II imaging capability of constructed CLSM is inspected, demonstrating a spatial resolution of 1.68 µm (close to the diffraction limit) and a fluorophore detection sensitivity as low as 100 nm. In particular, it is discovered that the multicolor imaging performance in both NIR-I and NIR-II windows is comparable to those from multialkali and InGaAs photomultiplier tubes. In addition, 3D NIR-II CLSM is also conducted for in vivo imaging of the vascular structure in mouse ear and subcutaneous tumors. To the best of authors' knowledge, this is the first time that a low-cost detector based on a SiPM has been used for microscopic imaging of trailing fluorescence signals in the NIR-II region of an NIR fluorescent probe.

Long-term monitoring of intravital biological processes using fluorescent protein-assisted NIR-II imaging

High spatial resolution, low background, and deep tissue penetration have made near-infrared II (NIR-II) fluorescence imaging one of the most critical tools for in vivo observation and measurement. However, the relatively short retention time and potential toxicity of synthetic NIR-II fluorophores limit their long-term application. Here, we report the use of infrared fluorescent proteins (iRFPs) as in vitro and in vivo NIR-II probes permitting prolonged continuous imaging (up to 15 months). As a representative example, iRFP713 is knocked into the mouse genome to generate a transgenic model to allow temporal and/or spatial expression control of the probe. To demonstrate its feasibility in a genuine diagnostic context, we adopt two liver regeneration models and successfully track the process for a week. The performance and monitoring efficacy are comparable to those of μCT and superior to those of indocyanine green dye. We are also able to effectively observe the pancreas, despite its deep location, under both physiological and pathological conditions. These results indicate that the iRFP-assisted NIR-II fluorescence system is suitable for monitoring various tissues and in vivo biological processes, providing a powerful noninvasive long-term imaging platform.

Coemissive luminescent nanoparticles combining aggregation-induced emission and quenching dyes prepared in continuous flow

Achieving an ideal light-harvesting system at a low cost remains a challenge. Herein, we report the synthesis of a hybrid dye system based on tetraphenylene (TPE) encapsulated organic dyes in a continuous flow microreactor. The composite dye nanoparticles (NPs) are synthesized based on supramolecular self-assembly to achieve the co-emission of aggregation-induced emission dyes and aggregation-caused quenching dyes (CEAA). Numerical simulations and molecular spectroscopy were used to investigate the synthesis mechanism of the CEAA dyes. Nanoparticles of CEAA dyes provide a platform for efficient cascade Förster resonance energy transfer (FRET). Composite dye nanoparticles of TPE and Nile red (NiR) are synthesized for an ideal light-harvesting system using coumarin 6 (C-6) as an energy intermediate. The light-harvesting system has a considerable red-shift distance (~126 nm), high energy-transfer efficiency (Φ_ET) of 99.37%, and an antenna effect of 26.23. Finally, the versatility of the preparation method and the diversity of CEAA dyes are demonstrated.

Dual H2 O2 -Amplified Nanofactory for Simultaneous Self-Enhanced NIR-II Fluorescence Activation Imaging and Synergistic Tumor Therapy

Activatable fluorescence imaging in the second near-infrared window (NIR-II FL, 1000-1700 nm) is of great significance for accurate tumor diagnosis and targeting therapy. However, the clinical translation of most stimulus-activated nanoprobes is severely restricted by insufficient tumor response and out-of-synchronization theranostic process. Herein, an intelligent nanofactory AUC-GOx/Cel that possesses the "external supply, internal promotion" dual H₂ O₂ -amplification strategy for homologous activated tumor theranostic is designed. This nanofactory is constructed via a two-step biomineralization method using Au-doped Ag₂ S as a carrier for glucose oxidase (GOx) and celastrol, followed by the growing of CuS to "turn off" the NIR-II FL signal. In the overexpressed H₂ O₂ tumor-microenvironment, the CuS featuring a responsive-degradability behavior can effectively release Cu ions, resulting in the "ON" state of NIR-II FL and Fenton-like activity. The exposed GOx can realize the intratumoral H₂ O₂ supply (external supply) via the effective conversion of glucose, and mediating tumor-starvation therapy; the interaction of celastrol and mitochondria can offer a substantial increase in the endogenous H₂ O₂ level (internal promotion), thereby significantly promoting the chemodynamic therapy (CDT) efficacy. Meanwhile, the dual H₂ O₂ -enhancement performance will in turn accelerate the degradation of AUC-GOx/Cel, and achieve a positive feedback mechanism for self-reinforcing CDT.